Carbide Drill Bits
from DigiKey
"Drill Bit Carbide 0.020"" (0.50mm)" [See More]
- Material: Carbide
- Drill Type: Drill Bit
- Units: Fractional
from RS Components, Ltd.
DeWALT DT60099-QZ Drill Bit [See More]
- Material: Carbide; Carbide
- Units: Metric
- Product: Drill Set
- Drill Type: Twist
from Petersen Products Co.
Description Saw, Hole 1-1/8" Carbide. Sage Subcategory Number W263. Shipping Wt. 0.5 Lb (0.23 Kg) [See More]
- Material: Carbide
- Diameter: 1.125
- Drill Type: Core Drill
from DigiKey
"Drill Bit Carbide 0.024"" (0.60mm)" [See More]
- Material: Carbide
- Drill Type: Drill Bit
- Units: Fractional
from RS Components, Ltd.
IRWIN SPEEDHAMMER SDS PLUS 5PC SET [See More]
- Material: Carbide; Tungsten carbide tipped
- Units: Metric
- Product: Drill Set
- Drill Type: Masonry
from Petersen Products Co.
Description Saw, Hole 1-3/8" Carbide. Sage Subcategory Number W263. Shipping Wt. 0.5 Lb (0.23 Kg) [See More]
- Material: Carbide
- Diameter: 1.375
- Drill Type: Core Drill
from DigiKey
"Drill Bit Carbide 0.031"" (0.80mm)" [See More]
- Material: Carbide
- Drill Type: Drill Bit
- Units: Fractional
from RS Components, Ltd.
Makita D-30477 Drill Bit Set [See More]
- Material: Carbide; Tungsten carbide tipped
- Units: Metric
- Product: Drill Set
- Drill Type: Twist
from Petersen Products Co.
Description Saw, Hole 1-7/8" Carbide. Sage Subcategory Number W263. Shipping Wt. 0.5 Lb (0.23 Kg) [See More]
- Material: Carbide
- Diameter: 1.875
- Drill Type: Core Drill
from DigiKey
"Drill Bit Carbide 0.028"" (0.70mm)" [See More]
- Material: Carbide
- Drill Type: Drill Bit
- Units: Fractional
from RS Components, Ltd.
Makita D-36712 Drill Bit Set [See More]
- Material: Carbide; Tungsten carbide tipped
- Units: Metric
- Product: Drill Set
- Drill Type: Twist
from Petersen Products Co.
Description Saw, Hole 5/8" Carbide. Sage Subcategory Number W263. Shipping Wt. 0.5 Lb (0.23 Kg) [See More]
- Material: Carbide
- Diameter: 0.630
- Drill Type: Core Drill
from DigiKey
"Drill Bit Carbide 0.035"" (0.90mm)" [See More]
- Material: Carbide
- Drill Type: Drill Bit
- Units: Fractional
from RS Components, Ltd.
NEMESIS II DRILL BIT 5 PCS 5.5-8MM [See More]
- Material: Carbide; Carbide
- Units: Metric
- Product: Drill Set
- Drill Type: Masonry
from Petersen Products Co.
Description Saw, Hole 2-3/8" Carbide. Sage Subcategory Number W263. Shipping Wt. 1 Lb (0.45 Kg) [See More]
- Material: Carbide
- Diameter: 2.375
- Drill Type: Core Drill
from DigiKey
"Drill Bit Carbide 0.043"" (1.10mm)" [See More]
- Material: Carbide
- Drill Type: Drill Bit
- Units: Fractional
from RS Components, Ltd.
Bosch 2607019444 Drill Bit Set [See More]
- Material: Carbide; Tungsten carbide tipped
- Units: Metric
- Product: Drill Set
- Drill Type: Twist; Masonry
from Petersen Products Co.
Description Saw, Hole 2-7/8" Carbide. Sage Subcategory Number W263. Shipping Wt. 1 Lb (0.45 Kg) [See More]
- Material: Carbide
- Diameter: 2.875
- Drill Type: Core Drill
from DigiKey
"Drill Bit Carbide 0.005"" (0.13mm)" [See More]
- Material: Carbide
- Drill Type: End Mill, Engraving
- Units: Fractional
from RS Components, Ltd.
SDS+ 2 Cutter Drill Bit Set Tube 6 Pcs [See More]
- Material: Carbide; Carbide
- Units: Metric
- Product: Drill Set
- Drill Type: Masonry
from Petersen Products Co.
Description Saw, Hole 3-3/8" Carbide. Sage Subcategory Number W263. Shipping Wt. 1 Lb (0.45 Kg) [See More]
- Material: Carbide
- Diameter: 3.375
- Drill Type: Core Drill
from DigiKey
Drill Bit Carbide [See More]
- Material: Carbide
- Drill Type: End Mill, Engraving
from RS Components, Ltd.
RS PRO M7700 Drill Bit Set [See More]
- Material: Carbide; Tungsten Carbide Tipped
- Units: Metric
- Product: Drill Set
- Drill Type: Masonry
from Petersen Products Co.
Description Saw, Hole 3-7/8" Carbide. Sage Subcategory Number W263. Shipping Wt. 1.5 Lb (0.68 Kg) [See More]
- Material: Carbide
- Diameter: 3.875
- Drill Type: Core Drill
from DigiKey
Drill Bit Carbide Assorted [See More]
- Material: Carbide
- Drill Type: Drill Bit
from RS Components, Ltd.
HEX-9 Multi-Construction bit, 5pc set 5. [See More]
- Material: Carbide; Carbide Tip
- Units: Metric
- Product: Drill Set
- Drill Type: Twist
from Petersen Products Co.
Description Saw, Hole 4-3/4" Carbide. Sage Subcategory Number W263. Shipping Wt. 1.5 Lb (0.68 Kg) [See More]
- Material: Carbide
- Diameter: 4.750
- Drill Type: Core Drill
from DigiKey
Drill Bit Carbide Assorted [See More]
- Material: Carbide
- Drill Type: Drill Bit
from RS Components, Ltd.
HEX-9 HardCeramic bit, 5pc mixed set 6mm [See More]
- Material: Carbide; Carbide Tip
- Units: Metric
- Product: Drill Set
- Drill Type: Masonry
from Petersen Products Co.
Description Saw, Hole 5-3/4" Carbide. Sage Subcategory Number W263. Shipping Wt. 1.5 Lb (0.68 Kg) [See More]
- Material: Carbide
- Diameter: 5.750
- Drill Type: Core Drill
from DigiKey
"Drill Bit Carbide 0.125"" (3.18mm)" [See More]
- Material: Carbide
- Drill Type: End Mill, Flat
- Units: Fractional
from RS Components, Ltd.
HEX-9 HardCeramic bit, 5pc set 4/5/6/8/1 [See More]
- Material: Carbide; Carbide Tip
- Units: Metric
- Product: Drill Set
- Drill Type: Masonry
from Petersen Products Co.
Description Saw, Hole 7/8" Carbide. Sage Subcategory Number W263. Shipping Wt. 0.5 Lb (0.23 Kg) [See More]
- Material: Carbide
- Diameter: 0.875
- Drill Type: Core Drill
from DigiKey
"Drill Bit Carbide 0.031"" (0.79mm)" [See More]
- Material: Carbide
- Drill Type: End Mill, Ball
- Units: Fractional
from RS Components, Ltd.
CYL-9 RobustLine MCB Set 4pcs [See More]
- Material: Carbide; Carbide Tip
- Units: Metric
- Product: Drill Set
- Drill Type: Twist
from Petersen Products Co.
Comment 1 Requires Heavy Duty Drill with 1/2" Chuck. Country of Origin USA. Description Hot Tapper, 1-1/2" NPT X 1-3/8" Carbide Hole Saw. Press. Pipeline Max 100 psi (6.89 bar). Sage Subcategory Number W261. Shipping Wt. 5 Lb (2.27 Kg) [See More]
- Material: Carbide
- Diameter: 1.375
- Drill Type: Core Drill
from DigiKey
"Drill Bit Carbide 0.125"" (3.18mm)" [See More]
- Material: Carbide
- Drill Type: End Mill, Flat
- Units: Fractional
from RS Components, Ltd.
Set Multiconstruction 4/5/6/8 Mm [See More]
- Material: Carbide; Carbide Tip
- Units: Metric
- Product: Drill Set
- Drill Type: Twist
from Petersen Products Co.
Comment 1 Requires Heavy Duty Drill with 1/2" Chuck. Country of Origin USA. Description Hot Tapper, 1-1/4" NPT X 1-1/8" Carbide Hole Saw. Press. Pipeline Max 100 psi (6.89 bar). Sage Subcategory Number W261. Shipping Wt. 5 Lb (2.27 Kg) [See More]
- Material: Carbide
- Diameter: 1.125
- Drill Type: Core Drill
from DigiKey
"Drill Bit Carbide 0.125"" (3.18mm)" [See More]
- Material: Carbide
- Drill Type: End Mill, Flat
- Units: Fractional
from RS Components, Ltd.
CYL-9 MultiConstruction 4pcs 5.5-6-7-8 [See More]
- Material: Carbide; Carbide Tip
- Units: Metric
- Product: Drill Set
- Drill Type: Twist
from Petersen Products Co.
Comment 1 Requires Heavy Duty Drill with 1/2" Chuck. Country of Origin USA. Description Hot Tapper, 1" NPT X 7/8" Carbide Hole Saw. Press. Pipeline Max 100 psi (6.89 bar). Sage Subcategory Number W261. Shipping Wt. 5 Lb (2.27 Kg) [See More]
- Material: Carbide
- Diameter: 0.875
- Drill Type: Core Drill
from DigiKey
"Drill Bit Carbide 0.063"" (1.60mm)" [See More]
- Material: Carbide
- Drill Type: End Mill, Flat
- Units: Fractional
from RS Components, Ltd.
concrete drill bit set 4 - 8 mm [See More]
- Material: Carbide; Tungsten Carbide Tipped
- Units: Metric
- Product: Drill Set
- Drill Type: Masonry
from Petersen Products Co.
Comment 1 Requires Heavy Duty Drill with 1/2" Chuck. Country of Origin USA. Description Hot Tapper, 2-1/2" NPT X 2-3/8" Carbide Hole Saw. Press. Pipeline Max 100 psi (6.89 bar). Sage Subcategory Number W261. Shipping Wt. 8 Lb (3.63 Kg) [See More]
- Material: Carbide
- Diameter: 2.375
- Drill Type: Core Drill
from DigiKey
"Drill Bit Carbide 0.031"" (0.79mm)" [See More]
- Material: Carbide
- Drill Type: End Mill, Flat
- Units: Fractional
from RS Components, Ltd.
7pc Drill bit set, 4x90, 5,5,6,6,8x100, [See More]
- Material: Carbide; Tungsten Carbide Tipped
- Units: Metric
- Product: Drill Set
- Drill Type: Masonry
from Petersen Products Co.
Comment 1 Requires Heavy Duty Drill with 1/2" Chuck. Country of Origin USA. Description Hot Tapper, 2" NPT X 1-7/8" Carbide Hole Saw. Press. Pipeline Max 100 psi (6.89 bar). Sage Subcategory Number W261. Shipping Wt. 6 Lb (2.72 Kg) [See More]
- Material: Carbide
- Diameter: 1.875
- Drill Type: Core Drill
from DigiKey
"Drill Bit Carbide 0.016"" (0.41mm)" [See More]
- Material: Carbide
- Drill Type: End Mill, Flat
- Units: Fractional
from RS Components, Ltd.
Concrete Drill Set - 5pcs [See More]
- Material: Carbide; Carbide Tip
- Units: Metric
- Product: Drill Set
- Designation: 10 mm, 4 mm
from Petersen Products Co.
Comment 1 Requires Heavy Duty Drill with 1/2" Chuck. Country of Origin USA. Description Hot Tapper, 3-1/2" NPT X 3-3/8" Carbide Hole Saw. Press. Pipeline Max 100 psi (6.89 bar). Sage Subcategory Number W261. Shipping Wt. 13 Lb (5.90 Kg) [See More]
- Material: Carbide
- Diameter: 3.375
- Drill Type: Core Drill
from DigiKey
"Drill Bit Carbide 0.010"" (0.25mm)" [See More]
- Material: Carbide
- Drill Type: End Mill, Flat
- Units: Fractional
from RS Components, Ltd.
Concrete Drill Set - 8pcs [See More]
- Material: Carbide; Carbide Tip
- Units: Metric
- Product: Drill Set
- Designation: 10 mm, 3 mm
from Petersen Products Co.
Comment 1 Requires Heavy Duty Drill with 1/2" Chuck. Country of Origin USA. Description Hot Tapper, 3" NPT X 2-7/8" Carbide Hole Saw. Press. Pipeline Max 100 psi (6.89 bar). Sage Subcategory Number W261. Shipping Wt. 10 Lb (4.54 Kg) [See More]
- Material: Carbide
- Diameter: 2.875
- Drill Type: Core Drill
from DigiKey
"Drill Bit Carbide 0.125"" (3.18mm)" [See More]
- Material: Carbide
- Drill Type: End Mill, Ball
- Units: Fractional
from RS Components, Ltd.
Coffret de 7 forets SDS-Plus XLR diam : [See More]
- Material: Carbide; Tungsten Carbide
- Units: Metric
- Product: Drill Set
- Drill Type: Masonry
from Petersen Products Co.
Comment 1 Requires Heavy Duty Drill with 1/2" Chuck. Country of Origin USA. Description Hot Tapper, 3/4" NPT x 5/8" Carbide Hole Saw. Press. Pipeline Max 100 psi (6.89 bar). Sage Subcategory Number W261. Shipping Wt. 4 Lb (1.81 Kg) [See More]
- Material: Carbide
- Diameter: 0.625
- Drill Type: Core Drill
from DigiKey
"Drill Bit Carbide 0.063"" (1.60mm)" [See More]
- Material: Carbide
- Drill Type: End Mill, Ball
- Units: Fractional
from RS Components, Ltd.
Masonry Drill Bit Set of 5 [See More]
- Material: Carbide; Tungsten Carbide Tipped
- Units: Metric
- Product: Drill Set
- Drill Type: Twist; Masonry
from Petersen Products Co.
Comment 1 Requires Heavy Duty Drill with 1/2" Chuck. Country of Origin USA. Description Hot Tapper, 4" NPT X 3-7/8" Carbide Hole Saw. Press. Pipeline Max 100 psi (6.89 bar). Sage Subcategory Number W261. Shipping Wt. 13 Lb (5.90 Kg) [See More]
- Material: Carbide
- Diameter: 3.875
- Drill Type: Core Drill
from Cutting Edge Technologies, Inc.
Diameter: 1/8". Flute Length: 3/8". Overall Length: 1 1/2". Type: NC Spotting Drill [See More]
- Material: Carbide
- Units: Fractional
- Product: Drill
- Drill Type: Twist; Spot Drill
from Greenlee Textron, Inc.
CARBIDE TIPPED MATERIAL. 3 PIECE(S). (3) CUTTER HEAD, PILOT DRILL, HEX KEY, CASE CONTENT. 7/8 INCH, 1-1/8 INCH, 1-3/8 INCH HOLE SAW SIZE [See More]
- Material: Carbide; Carbide Tipped
- Drill Type: Hole Saw
- Product: Drill Set
- Diameter: 0.875 to 1.375
from Minerallac Company
FERROUS METAL, NON FERROUS METAL, NON METAL CUT MATERIAL. CARBIDE GRIT BLADE MATERIAL. 4-3/8 INCH DIAMETER. 4.375 DIAMETER - DECIMAL. 4-3/8 DIAMETER - FRACTIONAL. 1-3/8 INCH CUTTING DEPTH. 7/16 INCH ARBOR SHANK SIZE. HEX ARBOR SHANK TYPE. USED WITH ARBOR NUMBER 86545, 86556. USED WITH PILOT DRILL... [See More]
- Material: Carbide
- Units: Fractional
- Product: Drill
- Drill Type: Hole Saw
from WhizCut of Sweden AB
Style J | Carbide 1, 2, 3 step Half Round Drill. With WhizDrill we have put together a range of micro drills that start at 0,1 mm and go up to 3 mm. These can be ordered to any geometry and shank sizes in stock are 1,00 mm, 1,50 mm, 2,00 mm, 2,50 mm, 3,00 mm, 1/8 ’ and 4.00 mm. We can also... [See More]
- Material: Carbide
- Units: Metric
- Product: Drill
- Drill Type: Microdrill; Step Drill; 1, 2, 3, Step Half Round Drill
from Allied Machine & Engineering Corp.
ASC 320 ® Solid Carbide Drills feature a patent-pending geometry for 3-20mm diameter product range and are available in 3.5X, 6X and 9X drill depth-to-diameter lengths. These high penetration drills provide high productivitywhile the unique combination of its geometry and coatings allow for use... [See More]
- Material: Carbide
- Units: Fractional
- Product: Drill
- Drill Type: Twist
from TroxellUSA
1 1/4" Carbide Hole Saw [See More]
- Material: Carbide
- Drill Type: Hole Saw
- Units: Fractional
- Diameter: 1.250
from Atom Precision of America, Inc.
Ideal chip ejection is assured due to unique design of point and flute configuration. The thinning point allows smoother entering when the drill digs in and prevents off-angle hole. [See More]
- Material: Carbide
- Units: Metric
- Product: Drill
- Diameter: 0.244
from Superior Tool Service, Inc.
#1 Carbide jobber length twist drill with tip ground for composite and straight shank. Designed for Composite Material Applications. [See More]
- Material: Carbide
- Units: Wire Gauge
- Product: Drill
- Drill Type: Twist; Jobber
from Walter Surface Technologies
Walter Carbide Core Cut annular cutters accurately drill large diameter holes in a variety of hard or abrasive materials such as stainless steel, cast iron, tough alloys or composite materials. They outperform and outlast conventional HSS cutters and allow for higher speed and feed rates while... [See More]
- Material: Carbide
- Units: Fractional; Metric
- Product: Drill
- Drill Type: Core Drill
from KEO Cutters
Plain Type, Straight Flute 60 ° Countersink Angle [See More]
- Material: Carbide
- Units: Fractional
- Product: Drill
- Drill Type: Combination Drill / Countersink
from L.H. Dottie Company
HAMMER TYPE. CARBIDE TIPPED MATERIAL. 3-1/2 INCH OVERALL LENGTH. STRAIGHT SHANK TYPE. 5 FLUTE(S). 3/16 INCH DRILL SIZE. USED ON ANCHOR SIZE 1/4 INCH. CD MODEL [See More]
- Material: Carbide
- Units: Fractional
- Product: Drill
- Drill Type: Masonry
from Melin Tool Company
For centering and spot drilling applications when high accuracy is necessary. 60 ° included angle. Use carbide for highly abrasive or tough materials in production runs. [See More]
- Material: Carbide
- Units: Fractional
- Product: Drill
- Drill Type: Combination Drill / Countersink
from Precision Cutting Tools, Inc.
1 X 1 X 1 X 3 - 4F RH BALL END CARBIDE [See More]
- Material: Carbide
- Units: Fractional
- Product: Drill
- Drill Type: Ball
from Peco Fasteners, Inc.
CARBIDE MATERIAL. 10 INCH OVERALL LENGTH. SDS SHANK TYPE. DRILLING LENGTH 8 INCH. HOLE DIAMETER 1/2 INCH. HOLE DIAMETER - DECIMAL .5. HOLE DIAMETER - DECIMAL - UOM IN. HOLE DIAMETER - FRACTIONAL 1/2 [See More]
- Material: Carbide
- Drill Type: Masonry
- Product: Drill
- Diameter: 0.500
from Sandvik Coromant Co.
In the machining world, drilling depths of 10 times the diameter and deeper are classified as deep hole drilling operations, whereby smaller drilling depths can also be produced with the help of gun drills. The positive effects of the gun drilling process are good surface quality, optimized... [See More]
- Material: Carbide; Brazed Carbide
- Units: Fractional; Metric (optional feature)
- Product: Drill
- Drill Type: Gundrill
from Reid Supply
ReidSupply has a wide selection of tools for drilling, cutting, smoothing and deburring holes, and have options ranging from standard drill bit sets to precision reamers. Reid Supply has an impressive selection of drill bits and accessories, such as drill blanks step drills. Browse our section to... [See More]
- Material: Carbide; Carbide
- Angle: 118
- Diameter: 0.327
- OAL: 4.75
from Milwaukee Electric Tool Corporation
CARBIDE TIPPED MATERIAL. 3-FLAT SHANK TYPE. 1/4 INCH X 4 INCH SHANK SIZE. SPLIT POINT CONSTRUCTION. PARABOLIC FLUTE TYPE. 135 DEG POINT ANGLE. THUNDERBOLT[R] BRAND. APPLICATION FIBERGLASS, CEMENT BOARD, TILE, BRICK, BLOCK [See More]
- Material: Carbide
- Angle: 135
- Product: Drill
from Snap-on Industrial Brands
CARBIDE TIPPED MATERIAL. 84 MM OVERALL LENGTH. 1/4 INCH SHANK SIZE. SANDFLEX[R] BRAND. PACKAGING QUANTITY 1. WEIGHT 35 GRAM [See More]
- Material: Carbide
- Units: Fractional
- Product: Drill
- Drill Type: Drill Bit
from Ebinger Manufacturing Corp.
PERCUSSION, ROTARY TYPE. TUNGSTEN CARBIDE TIPPED MATERIAL. 3 INCH OVERALL LENGTH. STRAIGHT SHANK TYPE. CUT MATERIAL BRICK, CONCRETE, GRANITE, MARBLE, SANDSTONE, TILE. STANDARD PACKAGE 12. HOLE DIAMETER 1/8 INCH. HOLE DIAMETER - DECIMAL .125. HOLE DIAMETER - DECIMAL - UOM IN. HOLE DIAMETER -... [See More]
- Material: Carbide
- OAL: 3.00
- Product: Drill
- Shank: Straight
from Ideal Industries, Inc.
ADJUSTABLE CAN LIGHT TYPE. NON-METAL CUT MATERIAL. CARBIDE COATED STAINLESS STEEL BLADE MATERIAL. 2-1/2 TO 7 INCH DIAMETER. NO SUPPLIED WITH PILOT DRILL. NO SUPPLIED WITH ARBOR. INCLUDES (2) DUST SHIELDS. EXCLUDES DRILL [See More]
- Material: Carbide
- Drill Type: Hole Saw
- Product: Drill
- Diameter: 2.500 to 7.000
from Sandvik AB
. STANDARD LENGTH TYPE. SOLID CARBIDE MATERIAL. 1-1/8 INCH OVERALL LENGTH. 0.038 INCH DRILL LENGTH. STRAIGHT SHANK TYPE. 1/8 INCH SHANK DIAMETER. 1/8 INCH BODY DIAMETER. 1/32 INCH DRILL DIAMETER. 1/8 BODY DIAMETER - FRACTIONAL. .125 BODY DIAMETER - DECIMAL. PRECISION. BRAND. NUMBER OF CUTTING ENDS... [See More]
- Material: Carbide
- Units: Fractional
- Product: Drill
- Drill Type: Twist; Combination Drill / Countersink
from Greenlee Textron, Inc.
QUICK CHANGE TYPE. CARBIDE TIPPED MATERIAL. 3 PIECE(S). (3) CUTTER HEAD, ARBOR, HEX KEY, CASE, SET SCREW, EJECTOR SPRING CONTENT. 7/8 INCH, 1-1/8 INCH, 1-3/8 INCH HOLE SAW SIZE. CHUCK SIZE 3/8 INCH [See More]
- Material: Carbide; Carbide Tipped
- Drill Type: Hole Saw
- Product: Drill Set
- Diameter: 0.875 to 1.375
from Minerallac Company
CARBIDE MATERIAL. SDS SHANK TYPE. PACKAGING QUANTITY 1 PER BOX. APPLICABLE STANDARD UL. HOLE DIAMETER 0.234 INCH. HOLE DIAMETER - DECIMAL .234. HOLE DIAMETER - DECIMAL - UOM IN [See More]
- Material: Carbide
- Drill Type: Masonry
- Product: Drill
- Shank: SDS
from WhizCut of Sweden AB
Style A | Carbide 1-Flute Twist drill with reinforced shank. With WhizDrill we have put together a range of micro drills that start at 0,1 mm and go up to 3 mm. These can be ordered to any geometry and shank sizes in stock are 1,00 mm, 1,50 mm, 2,00 mm, 2,50 mm, 3,00 mm, 1/8 ’ and 4.00 mm. We... [See More]
- Material: Carbide
- Units: Metric
- Product: Drill
- Drill Type: Twist; Microdrill
from Allied Machine & Engineering Corp.
GEN3SYS ® Drill Inserts and Holders penetrate up to 35% faster than competitive drilling products. Allied's AM200 ® coating increases tool life up to 50% when compared tocompetitor's premium coatings. [See More]
- Material: Carbide
- Units: Fractional
- Product: Drill
- Drill Type: Twist
from TroxellUSA
1 3/4" Carbide Hole Saw [See More]
- Material: Carbide
- Drill Type: Hole Saw
- Units: Fractional
- Diameter: 1.750
from Atom Precision of America, Inc.
Long type drill of ADS Standard Straight Shank Drill. [See More]
- Material: Carbide
- Units: Metric
- Product: Drill
- Diameter: 0.339
from Superior Tool Service, Inc.
#10 carbide drill x 1" flute length on 1/4-28 threaded hex shank with tip ground for drilling composite material. Designed for Composite Material Applications. [See More]
- Material: Carbide
- Units: Wire Gauge
- Product: Drill
- Drill Type: Twist
from Walter Surface Technologies
Walter Carbide Core Cut annular cutters accurately drill large diameter holes in a variety of hard or abrasive materials such as stainless steel, cast iron, tough alloys or composite materials. They outperform and outlast conventional HSS cutters and allow for higher speed and feed rates while... [See More]
- Material: Carbide
- Units: Fractional; Metric
- Product: Drill
- Drill Type: Core Drill
from L.H. Dottie Company
PERCUSSION/ROTARY TYPE. TUNGSTEN CARBIDE TIPPED MATERIAL. BLACK OXIDE COATED FINISH. 4 INCH OVERALL LENGTH. STRAIGHT SHANK TYPE. 3/16 INCH SHANK SIZE. 3 FLUTE(S). SLOW SPIRAL FLUTE TYPE. 3/16 INCH DRILL SIZE. APPLICATION BRICK, CONCRETE, TILE, SLATE AND CINDER BLOCK. MD MODEL [See More]
- Material: Carbide
- Units: Fractional
- Product: Drill
- Drill Type: Masonry
from Melin Tool Company
HIGH PERFORMANCE, 2 FLUTE COOLANT FED DRILLS. For drilling high alloy steel, stainless steel, and cast iron. 140 ° self centering point. AlTiN coated for greater wear resistance. Made from premium submicron grain carbide [See More]
- Material: Carbide
- Units: Fractional
- Product: Drill
- Drill Type: Twist
from Sandvik Coromant Co.
Producing holes in high-resin materials, with increasing demands on delamination and splintering, can be optimized with the drill geometry design. The CoroDrill geometries is designed to improve hole entrance and exit quality on carbon fiber materials with high fiber content. Benefits. Excellent... [See More]
- Material: Carbide
- Units: Fractional; Metric (optional feature)
- Product: Drill
- Drill Type: Twist
from Reid Supply
ReidSupply has a wide selection of tools for drilling, cutting, smoothing and deburring holes, and have options ranging from standard drill bit sets to precision reamers. Reid Supply has an impressive selection of drill bits and accessories, such as drill blanks step drills. Browse our section to... [See More]
- Material: Carbide; Carbide
- Diameter: 0.311
- Product: Drill
- OAL: 2.56
from Milwaukee Electric Tool Corporation
2-CUTTER, ROTARY HAMMER TYPE. CARBIDE BIT MATERIAL. 3/16 INCH MIN. DRILL SIZE. 1/2 INCH MAX. DRILL SIZE. SDS SHANK TYPE. REINFORCED PROCESS. ANSI MATERIAL SPECIFICATION. SPIRAL FLUTE TYPE. 5 DRILL(S). 3/16 INCH, 1/4 INCH, 5/16 INCH, 3/8 INCH, 1/2 INCH DRILL SIZES. 0.0625 INCH INCREMENT DRILL SIZE. [See More]
- Material: Carbide
- Product: Drill Set
from Snap-on Industrial Brands
CONSTANT PITCH TYPE. NON METAL CUT MATERIAL. CARBIDE TIPPED BLADE MATERIAL. 4 INCH DIAMETER. 4 DIAMETER - DECIMAL. 4 DIAMETER - FRACTIONAL. NUMBER OF TEETH PER INCH 4. 1-1/2 INCH CUTTING DEPTH. MOUNTING SIZE 5/8 INCH-18 TPI. DIAMETER - DECIMAL - UOM IN [See More]
- Material: Carbide
- Units: Fractional
- Product: Drill
- Drill Type: Hole Saw
from Ideal Industries, Inc.
FERROUS METAL, NON-FERROUS METAL CUT MATERIAL. CARBIDE TIPPED BLADE MATERIAL. 3/4 INCH DIAMETER. PRECISION GROUND TEETH TYPE. YES SUPPLIED WITH PILOT DRILL. YES SUPPLIED WITH ARBOR. 3/8 INCH ARBOR SHANK SIZE. TKO[TM] BRAND [See More]
- Material: Carbide
- Drill Type: Hole Saw
- Product: Drill
- Diameter: 0.750
from Sandvik AB
STANDARD LENGTH TYPE. SOLID CARBIDE MATERIAL. 1-1/2 INCH OVERALL LENGTH. 9/16 INCH FLUTE LENGTH. STRAIGHT SHANK TYPE. 2 FLUTE(S). 90 POINT ANGLE. PRECISION TWIST DRILL. BRAND. DRILL DIAMETER 1/8 INCH. DRILL DIAMETER - DECIMAL .125. DRILL DIAMETER - DECIMAL - UOM IN. DRILL DIAMETER - FRACTIONAL 1/8. [See More]
- Material: Carbide
- Units: Fractional
- Product: Drill
- Drill Type: Twist
from Greenlee Textron, Inc.
QUICK CHANGE TYPE. CARBIDE TIPPED MATERIAL. 5 PIECE(S). PLASTIC CASE PACKAGING TYPE. (3) CUTTER HEAD, ARBOR, HEX KEY, CASE, SET SCREW, EJECTOR SPRING CONTENT. 7/8 INCH, 1-1/8 INCH, 1-3/8 INCH, 1-3/4 INCH, 2 INCH HOLE SAW SIZE. CHUCK SIZE 3/8 INCH [See More]
- Material: Carbide; Carbide Tipped
- Drill Type: Hole Saw
- Product: Drill Set
- Diameter: 0.875 to 2.000
from Minerallac Company
PERCUSSION, ROTARY TYPE. TUNGSTEN CARBIDE TIPPED MATERIAL. 3 INCH OVERALL LENGTH. RELTON[T] BRAND. CUT MATERIAL BRICK, BLOCK, CONCRETE. 1 PER TUBE. PACKAGING TYPE PLASTIC TUBE. HOLE DIAMETER 1/8 INCH. HOLE DIAMETER - DECIMAL .125. HOLE DIAMETER - DECIMAL - UOM IN. HOLE DIAMETER - FRACTIONAL 1/8 [See More]
- Material: Carbide
- Drill Type: Masonry
- Product: Drill
- OAL: 3.00
from WhizCut of Sweden AB
Style E | Carbide 2-Flute multiple Step Twist Drill with reinforced shank. With WhizDrill we have put together a range of micro drills that start at 0,1 mm and go up to 3 mm. These can be ordered to any geometry and shank sizes in stock are 1,00 mm, 1,50 mm, 2,00 mm, 2,50 mm, 3,00 mm, 1/8 ’... [See More]
- Material: Carbide
- Units: Metric
- Product: Drill
- Drill Type: Twist; Microdrill
from TroxellUSA
Carbide Drill Bits - Bore clean holes into masonry materials. Drills holes in stone, masonry, tile and cement. [See More]
- Material: Carbide
- OAL: 6.50
from Atom Precision of America, Inc.
Extra Long type of ADS Standard Straight Shank Drill. [See More]
- Material: Carbide
- Units: Metric
- Product: Drill
- Diameter: 0.339
from Superior Tool Service, Inc.
#10 carbide drill x 1-1/2" flute length on 1/4-28 threaded hex shank with tip ground for drilling composite material. Designed for Composite Material Applications. [See More]
- Material: Carbide
- Units: Wire Gauge
- Product: Drill
- Drill Type: Twist
from L.H. Dottie Company
ROTARY HAMMER TYPE. TUNGSTEN CARBIDE TIPPED MATERIAL. 10-1/4 INCH OVERALL LENGTH. 8 INCH DRILLING LENGTH. SDS 4 PLUS SHANK TYPE. 6 FLUTE(S). SPIRAL FLUTE TYPE. 1/2 INCH DRILL SIZE. APPLICATION CONCRETE, MASONRY, BRICK, STONE. SDS MODEL [See More]
- Material: Carbide
- Units: Fractional
- Product: Drill
- Drill Type: Masonry
from Melin Tool Company
118 ° notched point suitable for most materials. Made from premium submicron grain carbide. [See More]
- Material: Carbide
- Units: Fractional
- Product: Drill
- Drill Type: Twist
from Sandvik Coromant Co.
CoroDrill ® 460 -XM is a multi-application, high performance drill that can be used across a wide range of materials. This drill provides high capacity utilization, flexibility and versatility. With one drill for all materials, stock holding can be reduced and greater machine flexibility is... [See More]
- Material: Carbide
- Units: Fractional; Metric (optional feature)
- Product: Drill
- Drill Type: Twist
from Reid Supply
Hole saws are used for making large hold diameters because they can do the job quicker than standard drill bits. We offer an assortment of hole saws, as well as pilot drills and arbors. . STS-65614 [See More]
- Material: Carbide; Carbide
- Diameter: 0.752
- Drill Type: Hole Saw
from Milwaukee Electric Tool Corporation
CARBIDE MATERIAL. 3/16 INCH MIN. DRILL SIZE. 1/2 INCH MAX. DRILL SIZE. REDUCED, SDS SHANK TYPE. 6 DRILL(S). 3/16 INCH, 1/4 INCH, 5/16 INCH, 3/8 INCH, 1/2 INCH DRILL SIZES [See More]
- Material: Carbide
- Shank: Reduced
- Product: Drill Set
from Snap-on Industrial Brands
CONSTANT PITCH TYPE. NON METAL CUT MATERIAL. CARBIDE TIPPED BLADE MATERIAL. 9/16 INCH DIAMETER. .5625 DIAMETER - DECIMAL. 9/16 DIAMETER - FRACTIONAL. NUMBER OF TEETH PER INCH 4. 1-1/2 INCH CUTTING DEPTH. MOUNTING SIZE 1/2 INCH-20 TPI. DIAMETER - DECIMAL - UOM IN [See More]
- Material: Carbide
- Units: Fractional
- Product: Drill
- Drill Type: Hole Saw
from Ideal Industries, Inc.
FERROUS METAL, NON-FERROUS METAL CUT MATERIAL. CARBIDE TIPPED BLADE MATERIAL. 1 INCH DIAMETER. PRECISION GROUND TEETH TYPE. YES SUPPLIED WITH PILOT DRILL. YES SUPPLIED WITH ARBOR. 3/8 INCH ARBOR SHANK SIZE. TKO[TM] BRAND [See More]
- Material: Carbide
- Drill Type: Hole Saw
- Product: Drill
- Diameter: 1.000
from Sandvik AB
. STANDARD LENGTH SELF CENTERING POINT TYPE. SOLID CARBIDE MATERIAL. 28.5 MM OVERALL LENGTH. 9.5 MM FLUTE LENGTH. STRAIGHT SHANK TYPE. 2 FLUTE(S). SPIRAL FLUTE TYPE. 118 POINT ANGLE. PRECISION TWIST DRILL. BRAND. NUMBER OF POINTS 4. CUT MATERIAL STEEL, STAINLESS STEEL, CAST IRON, COPPER, BRASS,... [See More]
- Material: Carbide
- Units: Metric
- Product: Drill
- Drill Type: Twist
from Greenlee Textron, Inc.
POWER DRILL TYPE. CARBIDE TIPPED STEEL MATERIAL. 4 INCH OVERALL LENGTH. 2-1/2 INCH FLUTE LENGTH. STRAIGHT SHANK TYPE. 1/4 INCH SHANK SIZE. FAST SPIRAL, TWIST FLUTE TYPE. 5/16 INCH DRILL SIZE. CUT MATERIAL BLOCK, BRICK, CONCRETE, PLASTER, STONE, WALLBOARD [See More]
- Material: Carbide; Carbide Tipped Steel
- Drill Type: Masonry
- Product: Drill
- Diameter: 0.312
from Minerallac Company
CARBIDE TIPPED STEEL MATERIAL. 3-1/2 INCH OVERALL LENGTH. STRAIGHT SHANK TYPE. 2 FLUTE(S). 5/32 INCH DRILL SIZE. TAP-CON[R] BRAND. APPLICATION INSTALLING 3/16 INCH TAPCON FASTENER. NUMBER OF POINTS 1. PACKAGING QUANTITY 1 PIECE PER BOX/10 PER STANDARD PACK [See More]
- Material: Carbide
- Units: Fractional
- Product: Drill
- Drill Type: Masonry
from WhizCut of Sweden AB
Style B | Carbide 2-Flute Twist drill with reinforced shank. With WhizDrill we have put together a range of micro drills that start at 0,1 mm and go up to 3 mm. These can be ordered to any geometry and shank sizes in stock are 1,00 mm, 1,50 mm, 2,00 mm, 2,50 mm, 3,00 mm, 1/8 ’ and 4.00 mm. We... [See More]
- Material: Carbide
- Units: Metric
- Product: Drill
- Drill Type: Twist; Microdrill
from TroxellUSA
Maximize the economy and efficiently of interchanging blades using the "D" drive system. Available: All replacement parts for 1 3/8" or 1 3/4" [See More]
- Material: Carbide
- OAL: 8.00
- Drill Type: Hole Saw
from Atom Precision of America, Inc.
Special guide-hole drills for use in drilling small holes. Most suitable for work that requires stringent hole position accuracy. Additional size of 0.01mm increment line up from Ø0.03 to Ø0.3 [See More]
- Material: Carbide
- Units: Metric
- Product: Drill
- Diameter: 0.001
from Superior Tool Service, Inc.
#10 carbide drill x 1/2" flute length on 1/4-28 threaded hex shank with tip ground for drilling composite material. Designed for Composite Material Applications. [See More]
- Material: Carbide
- Units: Wire Gauge
- Product: Drill
- Drill Type: Twist
from Melin Tool Company
Various degree points. Made from premium submicron grain carbide. [See More]
- Material: Carbide
- Units: Fractional
- Product: Drill
- Drill Type: Spot Drill
from Sandvik Coromant Co.
CoroDrill ® 860 is a solid carbide drill designed for a fast and problem-free drilling. It maximizes productivity through high metal cutting efficiency and machine utilization. With excellent chip evacuation in long and short chipping materials, CoroDrill 860 provides green light machining at... [See More]
- Material: Carbide
- Units: Fractional; Metric (optional feature)
- Product: Drill
- Drill Type: Twist
from Reid Supply
ReidSupply has a wide selection of tools for drilling, cutting, smoothing and deburring holes, and have options ranging from standard drill bit sets to precision reamers. Reid Supply has an impressive selection of drill bits and accessories, such as drill blanks step drills. Browse our section to... [See More]
- Material: Carbide; Carbide
- Drill Type: Jobber
- Product: Drill
- Diameter: 0.177
from Milwaukee Electric Tool Corporation
CARBIDE TIP MATERIAL. 5/32 INCH MIN. DRILL SIZE. 3/16 INCH MAX. DRILL SIZE. 3-FLAT SHANK TYPE. SELF CENTERING CONSTRUCTION. 3 DRILL(S). 5/32 INCH, 3/16 INCH, 1/4 INCH DRILL SIZES. SECURE-GRIP[TM] BRAND. APPLICABLE STANDARD ANSI. APPLICATION CONICAL ANCHOR, CONCRETE SCREW, NAIL-IN, HOLLOW WALL ANCHOR [See More]
- Material: Carbide
- Product: Drill Set
from Snap-on Industrial Brands
CONSTANT PITCH TYPE. NON METAL CUT MATERIAL. CARBIDE TIPPED BLADE MATERIAL. 3/4 INCH DIAMETER. .75 DIAMETER - DECIMAL. 3/4 DIAMETER - FRACTIONAL. NUMBER OF TEETH PER INCH 4. 1-1/2 INCH CUTTING DEPTH. MOUNTING SIZE 1/2 INCH-20 TPI. DIAMETER - DECIMAL - UOM IN [See More]
- Material: Carbide
- Units: Fractional
- Product: Drill
- Drill Type: Hole Saw
from Ideal Industries, Inc.
FERROUS METAL, NON-FERROUS METAL CUT MATERIAL. CARBIDE TIPPED BLADE MATERIAL. 1-3/8 INCH DIAMETER. 180 RPM (STAINLESS STEEL), 270 RPM (MILD STEEL), 300 RPM (IRON PLATE), 360 RPM (BRASS AND ALUMINUM) SPEED RATING. PRECISION GROUND TEETH TYPE. YES SUPPLIED WITH PILOT DRILL. YES SUPPLIED WITH ARBOR. [See More]
- Material: Carbide
- Drill Type: Hole Saw
- Product: Drill
- Diameter: 1.375
from Sandvik AB
. JOBBERS LENGTH TYPE. HEAT TREATED CARBIDE TIPPED MATERIAL. 2-3/4 INCH OVERALL LENGTH. 1-5/8 INCH FLUTE LENGTH. STRAIGHT SHANK TYPE. 2 FLUTE(S). 118 POINT ANGLE. PRECISION TWIST DRILL[R] BRAND. CUT MATERIAL CAST IRON, NON FERROUS METAL, COMPOSITE MATERIAL. COATING GRAY SATIN FINISH. DRILL DIAMETER... [See More]
- Material: Carbide
- Units: Fractional
- Product: Drill
- Drill Type: Jobber
from Greenlee Textron, Inc.
ELECTRIC HAMMER TYPE. CARBIDE TIPPED STEEL MATERIAL. 4 INCH OVERALL LENGTH. 2-1/2 INCH FLUTE LENGTH. STRAIGHT SHANK TYPE. 1/4 INCH SHANK SIZE. TWIST FLUTE TYPE. 3/8 INCH DRILL SIZE. CUT MATERIAL BLOCK, BRICK, CONCRETE, PLASTER, STONE, WALLBOARD [See More]
- Material: Carbide; Carbide Tipped Steel
- Drill Type: Masonry
- Product: Drill
- Diameter: 0.375
from WhizCut of Sweden AB
Style D | Carbide 2-Flute Twist drill with Straight shank. With WhizDrill we have put together a range of micro drills that start at 0,1 mm and go up to 3 mm. These can be ordered to any geometry and shank sizes in stock are 1,00 mm, 1,50 mm, 2,00 mm, 2,50 mm, 3,00 mm, 1/8 ’ and 4.00 mm. We... [See More]
- Material: Carbide
- Units: Metric
- Product: Drill
- Drill Type: Twist; Microdrill
from TroxellUSA
Pro Grade carbide grit rim. Interior Spring conveniently ejects waste material from the saw in motion. 1 13/8" [See More]
- Material: Carbide
- OAL: 8.00
- Drill Type: Hole Saw
from Atom Precision of America, Inc.
Special guide-hole drills for use in drilling small holes. Most suitable for work that requires stringent hole position accuracy. Additional size of 0.01mm increment line up from Ø0.03 to Ø0.3 [See More]
- Material: Carbide
- Units: Metric
- Product: Drill
- Diameter: 0.001
from Superior Tool Service, Inc.
#10 Carbide jobber length twist drill with tip ground for composite and straight shank. Designed for Composite Material Applications. [See More]
- Material: Carbide
- Units: Wire Gauge
- Product: Drill
- Drill Type: Twist; Jobber
from Melin Tool Company
140 ° point used to drill approximately 3 times the diameter depth. For use on materials RC-40 and higher. Made from premium submicron grain carbide. [See More]
- Material: Carbide
- Units: Fractional
- Product: Drill
- Drill Type: Spade Drill
from Sandvik Coromant Co.
CoroDrill ® 861 provides the high stability essential for drilling deep holes, with high speed and efficiency. Benefits. Accurate deep holes to depths up to 30 × drill diameter, without pecking. High speeds and feeds allow greater productivity to reduce cost per hole. Fast and efficient... [See More]
- Material: Carbide
- Units: Fractional; Metric (optional feature)
- Product: Drill
- Drill Type: Twist
from Reid Supply
ReidSupply has a wide selection of tools for drilling, cutting, smoothing and deburring holes, and have options ranging from standard drill bit sets to precision reamers. Reid Supply has an impressive selection of drill bits and accessories, such as drill blanks step drills. Browse our section to... [See More]
- Material: Carbide; Carbide
- Drill Type: Jobber
- Product: Drill
- Diameter: 0.157
from Milwaukee Electric Tool Corporation
CARBIDE TIPPED MATERIAL. 5/32 INCH MIN. DRILL SIZE. 3/8 INCH MAX. DRILL SIZE. 3-FLAT SHANK TYPE. SELF CENTERING CONSTRUCTION. 5 DRILL(S). 5/32 INCH, 3/16 INCH, 1/4 INCH, 5/16 INCH, 3/8 INCH DRILL SIZES. SECURE-GRIP[TM] BRAND. APPLICABLE STANDARD ANSI. APPLICATION CONICAL ANCHOR, CONCRETE SCREW,... [See More]
- Material: Carbide
- Product: Drill Set
from Snap-on Industrial Brands
CONSTANT PITCH TYPE. NON METAL CUT MATERIAL. CARBIDE TIPPED BLADE MATERIAL. 1 INCH DIAMETER. 1 DIAMETER - DECIMAL. 1 DIAMETER - FRACTIONAL. NUMBER OF TEETH PER INCH 4. 1-1/2 INCH CUTTING DEPTH. MOUNTING SIZE 1/2 INCH-20 TPI. DIAMETER - DECIMAL - UOM IN [See More]
- Material: Carbide
- Units: Fractional
- Product: Drill
- Drill Type: Hole Saw
from Ideal Industries, Inc.
CARBIDE TIPPED BLADE MATERIAL. 1-3/4 INCH DIAMETER. YES SUPPLIED WITH PILOT DRILL. YES SUPPLIED WITH ARBOR. 3/8 INCH ARBOR SHANK SIZE. TKO[TM] BRAND. CONDUIT/PIPE SIZE 1-1/4 INCH [See More]
- Material: Carbide
- Drill Type: Hole Saw
- Product: Drill
- Diameter: 1.750
from Greenlee Textron, Inc.
HAMMER TYPE. CARBON STEEL (BODY), CARBIDE (TIP) MATERIAL. HEXAGONAL SHANK TYPE. HARDENED PROCESS. 3/8 INCH DRILL SIZE. APPLICATION STANDARD OR HAMMER DRILLS [See More]
- Material: Carbide; Carbon Steel (Body), Carbide (Tip)
- Drill Type: Masonry
- Product: Drill
- Diameter: 0.375
from WhizCut of Sweden AB
Style C | Carbide 3-Flute Twist drill with reinforced shank. With WhizDrill we have put together a range of micro drills that start at 0,1 mm and go up to 3 mm. These can be ordered to any geometry and shank sizes in stock are 1,00 mm, 1,50 mm, 2,00 mm, 2,50 mm, 3,00 mm, 1/8 ’ and 4.00 mm. We... [See More]
- Material: Carbide
- Units: Metric
- Product: Drill
- Drill Type: Twist; Microdrill
from Atom Precision of America, Inc.
Special guide-hole drills for use in drilling small holes. Most suitable for work that requires stringent hole position accuracy. Additional size of 0.01mm increment line up from Ø0.03 to Ø0.3 [See More]
- Material: Carbide
- Units: Metric
- Product: Drill
- Diameter: 0.001
from Superior Tool Service, Inc.
#11 Carbide jobber length twist drill with tip ground for composite and straight shank. Designed for Composite Material Applications. [See More]
- Material: Carbide
- Units: Wire Gauge
- Product: Drill
- Drill Type: Twist; Jobber
from Melin Tool Company
135 ° notched point suitable for titanium and stainless materials. Made from premium submicron grain carbide. [See More]
- Material: Carbide
- Units: Fractional
- Product: Drill
- Drill Type: Twist
from Sandvik Coromant Co.
CoroDrill ® 862 offers outstanding performance for holes up to 2.95 mm (0.116 inch) diameter. A thin, effective coating helps retain cutting edge geometry and provides a smooth surface for chip evacuation, while even wear formation prolongs tool life for a wide range of materials. Benefits. High... [See More]
- Material: Carbide
- Units: Fractional; Metric (optional feature)
- Product: Drill
- Drill Type: Twist
from Reid Supply
ReidSupply has a wide selection of tools for drilling, cutting, smoothing and deburring holes, and have options ranging from standard drill bit sets to precision reamers. Reid Supply has an impressive selection of drill bits and accessories, such as drill blanks step drills. Browse our section to... [See More]
- Material: Carbide; Carbide
- Drill Type: Jobber
- Product: Drill
- Diameter: 0.512
from Milwaukee Electric Tool Corporation
CARBIDE TIP MATERIAL. 5/32 INCH MIN. DRILL SIZE. 3/8 INCH MAX. DRILL SIZE. 3-FLAT SHANK TYPE. SELF CENTERING CONSTRUCTION. 7 DRILL(S). 5/32 INCH, 3/16 INCH, 1/4 INCH, 5/16 INCH, 3/8 INCH DRILL SIZES. SECURE-GRIP[TM] BRAND. APPLICABLE STANDARD ANSI. APPLICATION CONICAL ANCHOR, CONCRETE SCREW,... [See More]
- Material: Carbide
- Product: Drill Set
from Snap-on Industrial Brands
CONSTANT PITCH TYPE. NON METAL CUT MATERIAL. CARBIDE TIPPED BLADE MATERIAL. 2 INCH DIAMETER. 2 DIAMETER - DECIMAL. 2 DIAMETER - FRACTIONAL. NUMBER OF TEETH PER INCH 4. 1-1/2 INCH CUTTING DEPTH. MOUNTING SIZE 5/8 INCH-18 TPI. DIAMETER - DECIMAL - UOM IN [See More]
- Material: Carbide
- Units: Fractional
- Product: Drill
- Drill Type: Hole Saw
from Ideal Industries, Inc.
VARIABLE PITCH TYPE. NON-METAL, ABRASIVE CUT MATERIAL. CARBIDE TIPPED BLADE MATERIAL. 1-3/8 INCH DIAMETER. YES SUPPLIED WITH PILOT DRILL. YES SUPPLIED WITH ARBOR. TRI-BORE[TM] BRAND [See More]
- Material: Carbide
- Drill Type: Hole Saw
- Product: Drill
- Diameter: 1.375
from Greenlee Textron, Inc.
ROTARY HAMMER TYPE. CARBIDE TIPPED ALLOY STEEL MATERIAL. 8-1/4 INCH OVERALL LENGTH. SDS PLUS SHANK TYPE. HARDENED PROCESS. H-STYLE FLUTE TYPE. 3/4 INCH DRILL SIZE. CASE DIMENSION 11.6 INCH W X 1.9 INCH D X 0.8 INCH H [See More]
- Material: Carbide; Carbide Tipped Alloy Steel
- Drill Type: Masonry
- Product: Drill
- Diameter: 0.750
from WhizCut of Sweden AB
Style H | Carbide center drills. With WhizDrill we have put together a range of micro drills that start at 0,1 mm and go up to 3 mm. These can be ordered to any geometry and shank sizes in stock are 1,00 mm, 1,50 mm, 2,00 mm, 2,50 mm, 3,00 mm, 1/8 ’ and 4.00 mm. We can also deliver with the... [See More]
- Material: Carbide
- Units: Metric
- Product: Drill
- Drill Type: Center Drill; Microdrill
from Atom Precision of America, Inc.
Special guide-hole drills for use in drilling small holes. Most suitable for work that requires stringent hole position accuracy. Additional size of 0.01mm increment line up from Ø0.03 to Ø0.3 [See More]
- Material: Carbide
- Units: Metric
- Product: Drill
- Diameter: 0.001
from Superior Tool Service, Inc.
#12 Carbide jobber length twist drill with tip ground for composite and straight shank. Designed for Composite Material Applications. [See More]
- Material: Carbide
- Units: Wire Gauge
- Product: Drill
- Drill Type: Twist; Jobber
from Sandvik Coromant Co.
CoroDrill ® R840 is a solid carbide drill for productive hole making in various applications. Designed for superior drilling in all materials, including hard steels up to 60 HRC. Available in a variety of diameters for general and small part machining. Benefits. Secure and predictable solution... [See More]
- Material: Carbide
- Units: Fractional; Metric (optional feature)
- Product: Drill
- Drill Type: Twist
from Reid Supply
ReidSupply has a wide selection of tools for drilling, cutting, smoothing and deburring holes, and have options ranging from standard drill bit sets to precision reamers. Reid Supply has an impressive selection of drill bits and accessories, such as drill blanks step drills. Browse our section to... [See More]
- Material: Carbide; Solid Carbide
- Drill Type: Jobber
- Product: Drill
- Diameter: 0.118
from Milwaukee Electric Tool Corporation
CARBIDE TIP MATERIAL. 5/32 INCH MIN. DRILL SIZE. 3/8 INCH MAX. DRILL SIZE. 3-FLAT SHANK TYPE. SELF CENTERING CONSTRUCTION. 6 DRILL(S). 5/32 INCH, 3/16 INCH, 1/4 INCH, 5/16 INCH, 3/8 INCH DRILL SIZES. SECURE-GRIP[TM] BRAND. APPLICABLE STANDARD ANSI. APPLICATION CONICAL ANCHOR, CONCRETE SCREW,... [See More]
- Material: Carbide
- Product: Drill Set
from WhizCut of Sweden AB
Style G | Carbide center drills long. With WhizDrill we have put together a range of micro drills that start at 0,1 mm and go up to 3 mm. These can be ordered to any geometry and shank sizes in stock are 1,00 mm, 1,50 mm, 2,00 mm, 2,50 mm, 3,00 mm, 1/8 ’ and 4.00 mm. We can also deliver with... [See More]
- Material: Carbide
- Units: Metric
- Product: Drill
- Drill Type: Jobber; Center Drill; Microdrill
from Atom Precision of America, Inc.
Special guide-hole drills for use in drilling small holes. Most suitable for work that requires stringent hole position accuracy. Additional size of 0.01mm increment line up from Ø0.03 to Ø0.3 [See More]
- Material: Carbide
- Units: Metric
- Product: Drill
- Diameter: 0.001
from Superior Tool Service, Inc.
#13 Carbide jobber length twist drill with tip ground for composite and straight shank. Designed for Composite Material Applications. [See More]
- Material: Carbide
- Units: Wire Gauge
- Product: Drill
- Drill Type: Twist; Jobber
from Sandvik Coromant Co.
When drilling in heat resistant super alloys many things need to be taken into account. Process security is the most important criteria along with repeatability, hole tolerance and quality. CoroDrill R846 delivers this using a unique geometry, a high-quality edge line and a wear-resistant top... [See More]
- Material: Carbide
- Units: Fractional; Metric (optional feature)
- Product: Drill
- Drill Type: Twist
from Reid Supply
ReidSupply has a wide selection of tools for drilling, cutting, smoothing and deburring holes, and have options ranging from standard drill bit sets to precision reamers. Reid Supply has an impressive selection of drill bits and accessories, such as drill blanks step drills. Browse our section to... [See More]
- Material: Carbide; Solid Carbide
- Drill Type: Jobber
- Product: Drill
- Diameter: 0.110
from Milwaukee Electric Tool Corporation
ROTARY TYPE. SOLID CARBIDE MATERIAL. 8 INCH OVERALL LENGTH. 6 INCH DRILLING LENGTH. SDS-PLUS SHANK TYPE. HARDENED PROCESS. ANSI MATERIAL SPECIFICATION. 4 FLUTE(S). SPIRAL FLUTE TYPE. 11/16 INCH DRILL SIZE. CUT MATERIAL CONCRETE, BLOCK. HEAD SHAPE CHISEL. CUT GEOMETRY TYPE 2-CUTTER [See More]
- Material: Carbide
- Units: Fractional
- Product: Drill
- Drill Type: Masonry
from WhizCut of Sweden AB
Style K | Carbide Double Countersink Drills. With WhizDrill we have put together a range of micro drills that start at 0,1 mm and go up to 3 mm. These can be ordered to any geometry and shank sizes in stock are 1,00 mm, 1,50 mm, 2,00 mm, 2,50 mm, 3,00 mm, 1/8 ’ and 4.00 mm. We can also deliver... [See More]
- Material: Carbide
- Units: Metric
- Product: Drill
- Drill Type: Microdrill; Combination Drill / Countersink; Double Countersink Drill
from Atom Precision of America, Inc.
Special guide-hole drills for use in drilling small holes. Most suitable for work that requires stringent hole position accuracy. Additional size of 0.01mm increment line up from Ø0.03 to Ø0.3 [See More]
- Material: Carbide
- Units: Metric
- Product: Drill
- Diameter: 0.001
from Superior Tool Service, Inc.
#14 Carbide jobber length twist drill with tip ground for composite and straight shank. Designed for Composite Material Applications. [See More]
- Material: Carbide
- Units: Wire Gauge
- Product: Drill
- Drill Type: Twist; Jobber
from Reid Supply
ReidSupply has a wide selection of tools for drilling, cutting, smoothing and deburring holes, and have options ranging from standard drill bit sets to precision reamers. Reid Supply has an impressive selection of drill bits and accessories, such as drill blanks step drills. Browse our section to... [See More]
- Material: Carbide; Solid Carbide
- Drill Type: Jobber
- Product: Drill
- Diameter: 0.118
from Milwaukee Electric Tool Corporation
ROTARY TYPE. SOLID CARBIDE MATERIAL. 5 INCH OVERALL LENGTH. 2 INCH DRILLING LENGTH. SDS-PLUS SHANK TYPE. HARDENED PROCESS. ANSI MATERIAL SPECIFICATION. 4 FLUTE(S). SPIRAL FLUTE TYPE. 5/32 INCH DRILL SIZE. CUT MATERIAL CONCRETE, BLOCK. HEAD SHAPE CHISEL. INCLUDES HEX SHOULDER. CUT GEOMETRY TYPE... [See More]
- Material: Carbide
- Units: Fractional
- Product: Drill
- Drill Type: Masonry
from WhizCut of Sweden AB
Style I | Carbide Half - Round Drill. With WhizDrill we have put together a range of micro drills that start at 0,1 mm and go up to 3 mm. These can be ordered to any geometry and shank sizes in stock are 1,00 mm, 1,50 mm, 2,00 mm, 2,50 mm, 3,00 mm, 1/8 ’ and 4.00 mm. We can also deliver with... [See More]
- Material: Carbide
- Units: Metric
- Product: Drill
- Drill Type: Microdrill; Half Round Drill
from Atom Precision of America, Inc.
Best for drilling precision small holes (smallest diameter Ø0.02). Wide application available in work materials, covering from steel to non-ferrous and resin. [See More]
- Material: Carbide
- Units: Metric
- Product: Drill
- Drill Type: Microdrill
from Superior Tool Service, Inc.
#15 Carbide jobber length twist drill with tip ground for composite and straight shank. Designed for Composite Material Applications. [See More]
- Material: Carbide
- Units: Wire Gauge
- Product: Drill
- Drill Type: Twist; Jobber
from Reid Supply
ReidSupply has a wide selection of tools for drilling, cutting, smoothing and deburring holes, and have options ranging from standard drill bit sets to precision reamers. Reid Supply has an impressive selection of drill bits and accessories, such as drill blanks step drills. Browse our section to... [See More]
- Material: Carbide; Solid Carbide
- Drill Type: Jobber
- Product: Drill
- Diameter: 0.118
from Milwaukee Electric Tool Corporation
ROTARY TYPE. SOLID CARBIDE MATERIAL. 12 INCH OVERALL LENGTH. 10 INCH DRILLING LENGTH. SDS-PLUS SHANK TYPE. HARDENED PROCESS. ANSI MATERIAL SPECIFICATION. 4 FLUTE(S). SPIRAL FLUTE TYPE. 5/8 INCH DRILL SIZE. CUT MATERIAL CONCRETE. CUT GEOMETRY TYPE 4-CUTTER [See More]
- Material: Carbide
- Units: Fractional
- Product: Drill
- Drill Type: Masonry
from WhizCut of Sweden AB
Style F | Carbide Spade Drill. With WhizDrill we have put together a range of micro drills that start at 0,1 mm and go up to 3 mm. These can be ordered to any geometry and shank sizes in stock are 1,00 mm, 1,50 mm, 2,00 mm, 2,50 mm, 3,00 mm, 1/8 ’ and 4.00 mm. We can also deliver with the... [See More]
- Material: Carbide
- Units: Metric
- Product: Drill
- Drill Type: Microdrill; Spade Drill
from Atom Precision of America, Inc.
Middle size of drill diameter 0.01mm increment series is standardized. This super precision drill provides under 2 μ tolerance of run-out accuracy and lip height difference. [See More]
- Material: Carbide
- Units: Metric
- Product: Drill
- Drill Type: Microdrill
from Superior Tool Service, Inc.
#16 Carbide jobber length twist drill with tip ground for composite and straight shank. Designed for Composite Material Applications. [See More]
- Material: Carbide
- Units: Wire Gauge
- Product: Drill
- Drill Type: Twist; Jobber
from Reid Supply
ReidSupply has a wide selection of tools for drilling, cutting, smoothing and deburring holes, and have options ranging from standard drill bit sets to precision reamers. Reid Supply has an impressive selection of drill bits and accessories, such as drill blanks step drills. Browse our section to... [See More]
- Material: Carbide; Solid Carbide
- Drill Type: Jobber
- Product: Drill
- Diameter: 0.220
from Milwaukee Electric Tool Corporation
ROTARY TYPE. SOLID CARBIDE MATERIAL. 4 INCH OVERALL LENGTH. 2 INCH DRILLING LENGTH. SDS-PLUS SHANK TYPE. HARDENED PROCESS. ANSI MATERIAL SPECIFICATION. 4 FLUTE(S). SPIRAL FLUTE TYPE. 3/16 INCH DRILL SIZE. CUT MATERIAL CONCRETE. CUT GEOMETRY TYPE 4-CUTTER [See More]
- Material: Carbide
- Units: Fractional
- Product: Drill
- Drill Type: Masonry
from Atom Precision of America, Inc.
Long tool life is achieved for mild steel materials hard-to-cut such as SU304, Kovar, Inconel etc. High stiffness tool design prevents the breakage in drilling hard-to-cut materials. [See More]
- Material: Carbide
- Units: Metric
- Product: Drill
- Drill Type: Microdrill
from Superior Tool Service, Inc.
#17 Carbide jobber length twist drill with tip ground for composite and straight shank. Designed for Composite Material Applications. [See More]
- Material: Carbide
- Units: Wire Gauge
- Product: Drill
- Drill Type: Twist; Jobber
from Reid Supply
ReidSupply has a wide selection of tools for drilling, cutting, smoothing and deburring holes, and have options ranging from standard drill bit sets to precision reamers. Reid Supply has an impressive selection of drill bits and accessories, such as drill blanks step drills. Browse our section to... [See More]
- Material: Carbide; Solid Carbide
- Drill Type: Jobber
- Product: Drill
- Diameter: 0.063
from Milwaukee Electric Tool Corporation
ROTARY TYPE. SOLID CARBIDE MATERIAL. 6 INCH OVERALL LENGTH. 4 INCH DRILLING LENGTH. SDS-PLUS SHANK TYPE. HARDENED PROCESS. ANSI MATERIAL SPECIFICATION. 4 FLUTE(S). SPIRAL FLUTE TYPE. 3/16 INCH DRILL SIZE. CUT MATERIAL CONCRETE. CUT GEOMETRY TYPE 4-CUTTER [See More]
- Material: Carbide
- Units: Fractional
- Product: Drill
- Drill Type: Masonry
from Atom Precision of America, Inc.
Stable long-lived machining can be achieved for precision small hole drilling of steels. Wide drilling application is availble from mild steel to hardened steel (HRC50) [See More]
- Material: Carbide
- Units: Metric
- Product: Drill
- Drill Type: Twist; Microdrill
from Superior Tool Service, Inc.
#18 Carbide jobber length twist drill with tip ground for composite and straight shank. Designed for Composite Material Applications. [See More]
- Material: Carbide
- Units: Wire Gauge
- Product: Drill
- Drill Type: Twist; Jobber
from Reid Supply
ReidSupply has a wide selection of tools for drilling, cutting, smoothing and deburring holes, and have options ranging from standard drill bit sets to precision reamers. Reid Supply has an impressive selection of drill bits and accessories, such as drill blanks step drills. Browse our section to... [See More]
- Material: Carbide; Solid Carbide
- Drill Type: Jobber
- Product: Drill
- Diameter: 0.126
from Milwaukee Electric Tool Corporation
ROTARY TYPE. SOLID CARBIDE MATERIAL. 4 INCH OVERALL LENGTH. 2 INCH DRILLING LENGTH. SDS-PLUS SHANK TYPE. HARDENED PROCESS. ANSI MATERIAL SPECIFICATION. 4 FLUTE(S). SPIRAL FLUTE TYPE. 1/4 INCH DRILL SIZE. CUT MATERIAL CONCRETE. CUT GEOMETRY TYPE 4-CUTTER [See More]
- Material: Carbide
- Units: Fractional
- Product: Drill
- Drill Type: Masonry
from Atom Precision of America, Inc.
Best for drilling precision small holes. Wide application available covering from steel to non-ferrous and resin. [See More]
- Material: Carbide
- Units: Metric
- Product: Drill
- Drill Type: Microdrill
from Superior Tool Service, Inc.
#19 carbide drill x 1" flute length on 1/4-28 threaded hex shank with tip ground for drilling composite material. Designed for Composite Material Applications. [See More]
- Material: Carbide
- Units: Wire Gauge
- Product: Drill
- Drill Type: Twist
from Reid Supply
ReidSupply has a wide selection of tools for drilling, cutting, smoothing and deburring holes, and have options ranging from standard drill bit sets to precision reamers. Reid Supply has an impressive selection of drill bits and accessories, such as drill blanks step drills. Browse our section to... [See More]
- Material: Carbide; Solid Carbide
- Drill Type: Jobber
- Product: Drill
- Diameter: 0.126
from Milwaukee Electric Tool Corporation
ROTARY TYPE. SOLID CARBIDE MATERIAL. 6 INCH OVERALL LENGTH. 4 INCH DRILLING LENGTH. SDS-PLUS SHANK TYPE. HARDENED PROCESS. ANSI MATERIAL SPECIFICATION. 4 FLUTE(S). SPIRAL FLUTE TYPE. 1/4 INCH DRILL SIZE. CUT MATERIAL CONCRETE. CUT GEOMETRY TYPE 4-CUTTER [See More]
- Material: Carbide
- Units: Fractional
- Product: Drill
- Drill Type: Masonry
from Atom Precision of America, Inc.
for drillng precision small deep holes.(smallest diameter Ø0.03). Wide application available covering from steel to non-ferrous and resin. [See More]
- Material: Carbide
- Units: Metric
- Product: Drill
- Drill Type: Microdrill
from Superior Tool Service, Inc.
#19 carbide drill x 1-1/2" flute length on 1/4-28 threaded hex shank with tip ground for drilling composite material. Designed for Composite Material Applications. [See More]
- Material: Carbide
- Units: Wire Gauge
- Product: Drill
- Drill Type: Twist
from Reid Supply
ReidSupply has a wide selection of tools for drilling, cutting, smoothing and deburring holes, and have options ranging from standard drill bit sets to precision reamers. Reid Supply has an impressive selection of drill bits and accessories, such as drill blanks step drills. Browse our section to... [See More]
- Material: Carbide; Carbide
- Drill Type: Spot Drill
- Product: Drill
- Diameter: 0.189
from Milwaukee Electric Tool Corporation
ROTARY TYPE. SOLID CARBIDE MATERIAL. 8 INCH OVERALL LENGTH. 6 INCH DRILLING LENGTH. SDS-PLUS SHANK TYPE. HARDENED PROCESS. ANSI MATERIAL SPECIFICATION. 4 FLUTE(S). SPIRAL FLUTE TYPE. 1/4 INCH DRILL SIZE. CUT MATERIAL CONCRETE. CUT GEOMETRY TYPE 4-CUTTER [See More]
- Material: Carbide
- Units: Fractional
- Product: Drill
- Drill Type: Masonry
from Atom Precision of America, Inc.
Stable long-lived machining can be achieved for precision small hole drilling of steels. Wide drilling application is availble from mild steel to hardened steel (HRC50) [See More]
- Material: Carbide
- Units: Metric
- Product: Drill
- Drill Type: Microdrill
from Superior Tool Service, Inc.
#19 carbide drill x 1/2" flute length on 1/4-28 threaded hex shank with tip ground for drilling composite material. Designed for Composite Material Applications. [See More]
- Material: Carbide
- Units: Wire Gauge
- Product: Drill
- Drill Type: Twist
from Milwaukee Electric Tool Corporation
ROTARY TYPE. SOLID CARBIDE MATERIAL. 12 INCH OVERALL LENGTH. 10 INCH DRILLING LENGTH. SDS-PLUS SHANK TYPE. HARDENED PROCESS. ANSI MATERIAL SPECIFICATION. 4 FLUTE(S). SPIRAL FLUTE TYPE. 1/4 INCH DRILL SIZE. CUT MATERIAL CONCRETE. CUT GEOMETRY TYPE 4-CUTTER [See More]
- Material: Carbide
- Units: Fractional
- Product: Drill
- Drill Type: Masonry
from Atom Precision of America, Inc.
Best for drilling precision small holes. Wide application available covering from steel to non-ferrous and resin. [See More]
- Material: Carbide
- Units: Metric
- Product: Drill
- Drill Type: Microdrill
from Superior Tool Service, Inc.
#19 Carbide jobber length twist drill with tip ground for composite and straight shank. Designed for Composite Material Applications. [See More]
- Material: Carbide
- Units: Wire Gauge
- Product: Drill
- Drill Type: Twist; Jobber
from Milwaukee Electric Tool Corporation
ROTARY TYPE. SOLID CARBIDE MATERIAL. 6 INCH OVERALL LENGTH. 4 INCH DRILLING LENGTH. SDS-PLUS SHANK TYPE. HARDENED PROCESS. ANSI MATERIAL SPECIFICATION. 4 FLUTE(S). SPIRAL FLUTE TYPE. 5/16 INCH DRILL SIZE. CUT MATERIAL CONCRETE. CUT GEOMETRY TYPE 4-CUTTER [See More]
- Material: Carbide
- Units: Fractional
- Product: Drill
- Drill Type: Masonry
from Atom Precision of America, Inc.
Stable long-lived machining can be achieved for precision small hole drilling of steels. Wide drilling application is availble from mild steel to hardened steel(HRC50) [See More]
- Material: Carbide
- Units: Metric
- Product: Drill
- Drill Type: Microdrill
from Superior Tool Service, Inc.
#40 carbide drill x 1/2" flute length on 1/4-28 threaded hex shank with tip ground for drilling composite material. Designed for Composite Material Applications. [See More]
- Material: Carbide
- Units: Wire Gauge
- Product: Drill
- Drill Type: Twist
from Milwaukee Electric Tool Corporation
ROTARY TYPE. SOLID CARBIDE MATERIAL. 6 INCH OVERALL LENGTH. 4 INCH DRILLING LENGTH. SDS-PLUS SHANK TYPE. HARDENED PROCESS. ANSI MATERIAL SPECIFICATION. 4 FLUTE(S). SPIRAL FLUTE TYPE. 3/8 INCH DRILL SIZE. CUT MATERIAL CONCRETE. CUT GEOMETRY TYPE 4-CUTTER [See More]
- Material: Carbide
- Units: Fractional
- Product: Drill
- Drill Type: Masonry
from Atom Precision of America, Inc.
High quality general purpose drill applicable for steels, non-ferrous materials and for plastics. An excellent cutting performance is obtained at comparatively low speed. [See More]
- Material: Carbide
- Units: Metric
- Product: Drill
- Drill Type: Twist
from Superior Tool Service, Inc.
3/32" (.0937) dia. x 4" OAL Carbide Dagger Drill for composites, for hand operations, allowing for better depth control. Designed for Composite Material Applications. [See More]
- Material: Carbide
- Units: Fractional
- Product: Drill
- Drill Type: Twist; Dagger Drill
from Milwaukee Electric Tool Corporation
ROTARY TYPE. SOLID CARBIDE MATERIAL. 12 INCH OVERALL LENGTH. 10 INCH DRILLING LENGTH. SDS-PLUS SHANK TYPE. HARDENED PROCESS. ANSI MATERIAL SPECIFICATION. 4 FLUTE(S). SPIRAL FLUTE TYPE. 3/8 INCH DRILL SIZE. CUT MATERIAL CONCRETE. CUT GEOMETRY TYPE 4-CUTTER [See More]
- Material: Carbide
- Units: Fractional
- Product: Drill
- Drill Type: Masonry
from Atom Precision of America, Inc.
High quality general purpose drill applicable for steels, non-ferrous and for plastics. An excellent cutting performance is obtained at comparatively low speed. [See More]
- Material: Carbide
- Units: Metric
- Product: Drill
- Diameter: 0.339
from Superior Tool Service, Inc.
3/32" Carbide jobber length twist drill with tip ground for drilling composite, straight shank. Designed for Composite Material Applications. [See More]
- Material: Carbide
- Units: Fractional
- Product: Drill
- Drill Type: Twist; Jobber
from Milwaukee Electric Tool Corporation
ROTARY TYPE. SOLID CARBIDE MATERIAL. 18 INCH OVERALL LENGTH. 16 INCH DRILLING LENGTH. SDS-PLUS SHANK TYPE. HARDENED PROCESS. ANSI MATERIAL SPECIFICATION. 4 FLUTE(S). SPIRAL FLUTE TYPE. 3/8 INCH DRILL SIZE. CUT MATERIAL CONCRETE. CUT GEOMETRY TYPE 4-CUTTER [See More]
- Material: Carbide
- Units: Fractional
- Product: Drill
- Drill Type: Masonry