Silicone Conformal Coatings
from Master Bond, Inc.
MasterSil 973S-LO is a two component, silver filled silicone with superb electrical and thermal conductivity. Its exceptionally low volume resistivity allows it to be used for many different applications involving bonding, sealing and coating. It is a paste like system with minimal flow. Its... [See More]
- Chemical System: Silicone
- Composition: Filled
- Type: Thermally Conductive; Electrically Conductive; NASA Low Outgassing
- Cure / Technology: Thermoset; Two Component ; Addition Cure
from Ellsworth Adhesives
Dow 3099 HVIC Compound Opaque Gray is a one component, grease-like silicone that is used to provide long term resistance to water erosion, corona stress, contaminants, and UV light. It is non-tracking, easy to use, and is resistant to filming, arc, and flashover. 22.6 kg Pail. [See More]
- Chemical System: Silicone
- Dielectric Strength: 285
from RS Components, Ltd.
MG Silicone Conformal coating 340g [See More]
- Chemical System: Silicone; Silicone
- Use Temperature: -40 to 392
- Industry: Aerospace; Electronics; OEM or Industrial; Aerospace, Air Bag Controllers, Automobile, Aviation, Communication, Consumer Electronics Industries, Electric Generators, Industrial Control Equip
from Master Bond, Inc.
MasterSil 920-LO is an ideal material for the encapsulation of sensitive electronic and optical components, especially when low stress is a critical requirement. This neutral curing, non-corrosive, RTV silicone has very good flow properties and outstanding electrical insulation values, which enhance... [See More]
- Chemical System: Silicone
- Composition: Unfilled
- Type: High Dielectric; Optical; NASA Low Outgassing
- Cure / Technology: Thermoset; Single Component; Room Temperature Vulcanizing or Curing
from Ellsworth Adhesives
Dow DOWSIL ™ 1-2577 Low-VOC Conformal Coating Clear is a one component, low viscosity, silicone resin coating that is used to protect electronic components from stress and abrasions. It is an RTV elastoplastic, solvent based, low odor, cures at room temperature, and has reduced VOC. 15 kg... [See More]
- Chemical System: Silicone
- Dielectric Strength: 350
- Cure / Technology: Single Component
- Viscosity: 1000
from RS Components, Ltd.
Silicone modified conformal coating [See More]
- Chemical System: Silicone; Silicone
- Use Temperature: -40 to 392
- Industry: Electric Generators, High Temperature Environments, LED Boards, Motors, PCBs, Relays, Transformers
from Master Bond, Inc.
Low viscosity MasterSil 152 is a two component, optically clear silicone system that cures when exposed to air at room temperature. It has outstanding electrical insulation properties, making it ideal for potting and encapsulation applications. Additionally it features a long working life and has a... [See More]
- Chemical System: Silicone
- Composition: Unfilled
- Type: High Dielectric; Optical
- Cure / Technology: Thermoset; Two Component ; Room Temperature Vulcanizing or Curing
from Ellsworth Adhesives
Dow DOWSIL ™ 1-2577 Low-VOC Conformal Coating Clear is a one component, low viscosity, silicone resin coating that is used to protect electronic components from stress and abrasions. It is an RTV, solvent based, low odor, cures at room temperature, and has reduced VOC. 18.1 kg Pail. [See More]
- Chemical System: Silicone
- Dielectric Strength: 406
- Cure / Technology: Single Component
- Viscosity: 800
from RS Components, Ltd.
Konform silicone coating 400ml [See More]
- Chemical System: Silicone; Silicone
- Industry: Aerospace; Aerospace, Data Communications, Instrumentation
- Form / Shape: Liquid
- Use Temperature: -85 to 392
from Ellsworth Adhesives
Dow DOWSIL ™ 1-2620 Dispersion RTV Conformal Coating Clear Yellow is a one component, low viscosity, silicone resin coating that is used to protect electronic components from stress and abrasions. It is solvent based, low odor, cures at room temperature, and has reduced VOC. 3 kg Pail.This is... [See More]
- Chemical System: Silicone
- Dielectric Strength: 400
- Cure / Technology: Single Component
- Viscosity: 350
from RS Components, Ltd.
MG silicone conformal coating 422B 1L [See More]
- Chemical System: Silicone; Silicone
- Use Temperature: -40 to 392
- Industry: PCBs
from Ellsworth Adhesives
Dow DOWSIL ™ 3-1944 RTV Coating Clear is a one component, solvent free conformal coating that is used for protection, encapsulation, and bonding of common materials in the electronics industry. It flowable, self leveling, flame resistant, and cures at room temperature. 18.1 kg Pail. [See More]
- Chemical System: Silicone
- Dielectric Strength: 525
- Cure / Technology: Single Component
- Viscosity: 63775
from Ellsworth Adhesives
Dow DOWSIL ™ 3-1953 Conformal Coating Clear is a one component, medium viscosity, solvent free silicone that is used for print wire boards, circuit boards, and other sensitive electronic components. It has fast RTV cure, offers stress relief, and is environmentally friendly. 18.1 kg Pail. [See More]
- Chemical System: Silicone
- Dielectric Strength: 400
- Cure / Technology: Single Component
- Viscosity: 350
from Ellsworth Adhesives
Dow DOWSIL ™ 3-1953 Conformal Coating Clear is a one component, medium viscosity, solvent free silicone that is used for print wire boards, circuit boards, and other sensitive electronic components. It has fast RTV cure, offers stress relief, and is environmentally friendly. 3.6 kg Pail. [See More]
- Chemical System: Silicone
- Dielectric Strength: 400
- Cure / Technology: Single Component
- Viscosity: 350
from Ellsworth Adhesives
Dow DOWSIL ™ 3-1953 Conformal Coating Clear is a one component, medium viscosity, solvent free silicone that is used for print wire boards, circuit boards, and other sensitive electronic components. It has a fast RTV cure, offers stress relief, and is environmentally friendly. 6 oz Cartridge. [See More]
- Chemical System: Silicone
- Dielectric Strength: 400
- Cure / Technology: Single Component
- Viscosity: 350
from Aremco Products, Inc.
Exceptional electrical, moisture & chemical resistance [See More]
- Chemical System: Silicone
- Composition: Filled
- Type: High Dielectric
- Cure / Technology: Thermoset
from Wacker Chemical Corp.
SEMICOSIL ® 936 UV is an RTV-1 amine cure system that cures on contact with moisture in the air and/or through exposure to high energy ultraviolet light. Special features. Rapid UV acceleration. Shadow cure. solvent free. Application. SEMICOSIL ® 936 UV is intended as a protective coating... [See More]
- Chemical System: Silicone; Elastomeric
- Cure / Technology: Thermoset; UV or Radiation Cured; Single Component
- Type: High Dielectric
- Form / Shape: Liquid
from Henkel Corporation - Electronics
Loctite 5290 is used for protecting printed circuit boards and other sensitive electronic components. It is designed to provide environmental protection. This product is typically used in applications with an operating range of -53 °C to 204 °C. [See More]
- Chemical System: Silicone
- Industry: Electronics
- Cure / Technology: Single Component
- Viscosity: 300
from Bluestar Silicones USA Corp.
One-Component , Black, Light Opaque, Addition Cure, Electronic Protective coating Silicone Compound. Properties. Viscosity 35000. Hardness Sha 45. Description. Bluesil V-205 is a one component, black, addition cure silicone rubber compound. It is designed as a protective coating for electronic... [See More]
- Chemical System: Silicone
- Form / Shape: Liquid
- Cure / Technology: Single Component
- Industry: Electronics
from Protavic America, Inc.
PNS-56225 ™ is a two-component clear ONE TO ONE MIX RATIO room temperature cure silicone encapsulant. It is designed for clear LED potting, encapsulation by casting of completed circuit boards, hybrid circuits, and power supplies, where flexibility, reparability, and high temperature... [See More]
- Chemical System: Silicone
- Composition: Unfilled
- Type: Thermally Conductive; Electrically Conductive
- Cure / Technology: Thermoset; Two Component
from Techsil Limited
MG Chemicals 422B is a silicone modified conformal coating which is a clear and flexible coating, ideal for protecting electronic circuits in high temperature environments or applications requiring extreme flexibility. It protects against moisture, dirt, dust, and other particulates thus avoiding... [See More]
- Chemical System: Silicone; Elastomeric
- Industry: Electronics
from Shenzhen DeepMaterial Technologies Co., Ltd
Used to protect printed circuit boards and other sensitive electronic components. It is designed to provide environmental protection. This product is usually used from -53°C to 204°C. [See More]
- Chemical System: Silicone
- Industry: Electronics
- Cure / Technology: UV or Radiation Cured
from Protavic America, Inc.
PTS-46303 A/B ™ is a two-component silicone encapsulant designed for encapsulation by casting of completed circuit boards, hybrid circuits, and power supplies, where flexibility, reparability, thermal conductivity, and high temperature resistance are required. Possible applications include... [See More]
- Chemical System: Silicone
- Composition: Filled
- Type: Thermally Conductive; High Dielectric
- Cure / Technology: Thermoset; Two Component
from Techsil Limited
MG Chemicals 422B Silicone Conformal Coating is a clear and flexible aerosol coating that is ideal for protecting electronic circuits in high temperature environments or applications requiring extreme flexibility. It protects against moisture, dirt, dust, and other particulates thus avoiding... [See More]
- Chemical System: Silicone; Elastomeric
- Industry: Electronics
from Techsil Limited
MG Chemicals 422B is a silicone modified conformal coating which is a clear and flexible coating, ideal for protecting electronic circuits in high temperature environments or applications requiring extreme flexibility. It protects against moisture, dirt, dust, and other particulates thus avoiding... [See More]
- Chemical System: Silicone; Elastomeric
- Industry: Electronics
from Techsil Limited
SLE5300 is a two-component silicone elastomer which can be cured rapidly at elevated temperatures, especially in thin films. Contains no solvents so avoids any potential hazards associated with solvents, it requires no solvent disposal and therefore has much lower manufacturing costs. Its rapid cure... [See More]
- Chemical System: Silicone; Elastomeric
from Techsil Limited
DETAILS. YE5505 is a low viscosity silicone coating from Momentive Performance Materials. It has an easily pourable consistency and excellent adhesion to metals, ceramics and glass without the use of a primer. Product Benefits. Low viscosity. Oxime cure; little risk of corrosion. Excellent... [See More]
- Chemical System: Silicone; Elastomeric
- Industry: Electronics