Automotive Industrial Adhesives
from CHT USA Inc.
CHT's AS1821 is is a non-corrosive, neutral cure, 1-part, RTV (Room Temperature Vulcanising) silicone adhesive sealant. It is one in a range of Acetone cure products which are solvent free. It exhibits excellent primerless adhesion to many substrates and cures rapidly at room temperature when in... [See More]
- Industry: Automotive; Electronics
- Cure / Technology: Single Component; Acetone
- Chemical System: Silicone
- Features: Sealant
from Master Bond, Inc.
MasterSil 157 is a two part system for potting, encapsulation and sealing applications. This optically clear formulation features a low index of refraction and excellent light transmittance. Highly flexible, it is capable of withstanding the most rigorous thermal cycling and mechanical shock. These... [See More]
- Industry: Aerospace; Automotive; Electronics; Electric Power; Marine; Optical; Photonics; OEM or Industrial; Semiconductors, IC's
- Composition: Unfilled
- Chemical System: Silicone
- Cure / Technology: Thermoset; Two Component ; Room Temperature Vulcanizing or Curing; Addition Cure
from MacDermid Alpha Electronics Solutions
A silver sinter paste, providing high thermal and electrical conductivity. Product Overview. The ALPHA ® Argomax ® 2020 Paste is a high-performance silver sinter paste used in applications that require excellent thermal and electrical conductivity. This paste is particularly suited for... [See More]
- Industry: Automotive; Electronics; Semiconductors, IC's
- Features: Thermally Conductive
from Hernon Manufacturing, Inc.
External Ammunition Sealant 76040 is a single component, U.V curable anaerobic sealant. 76040 has a low viscosity penetrating material capable of bonding and sealing primers and case mouths in ammunition. It is specially formulated for pre-assembled components; it works by capillary action sealing... [See More]
- Industry: Aerospace; Automotive; Electronics; Electric Power; Military; OEM or Industrial
- Features: Sealant
- Cure / Technology: Thermoset; UV or Radiation Cured; Single Component; Room Temperature Vulcanizing or Curing
from ELANTAS North America LLC
Trickle resin system for impregnation or protective overcoat [See More]
- Industry: Aerospace; Automotive; Electric Power; Marine; OEM or Industrial
- Composition: Unfilled
- Chemical System: Epoxy
- Cure / Technology: Thermoset; Two Component
from Ellsworth Adhesives
3M Super Silicone Sealant Clear 1/10 Gallon Cartridge is a one component, paste-like adhesive/sealant that adheres to clean metal, glass, wood, ceramic, natural and synthetic fiber, painted surfaces, and many plastics. 0.1 gal Cartridge. [See More]
- Industry: Automotive
- Cure / Technology: Single Component
- Chemical System: Silicone
- Features: Sealant
from CHT USA Inc.
AS5702 is a non-corrosive, neutral cure, 1-part, RTV (Room Temperature Vulcanising) silicone adhesive sealant. It is one in a range of Alkoxy cure products which are solvent free. It exhibits excellent primerless adhesion to many substrates and cures at room temperature when in contact with... [See More]
- Industry: Automotive; Electronics
- Cure / Technology: Single Component; Alkoxy
- Chemical System: Silicone
- Features: Sealant
from Master Bond, Inc.
Master Bond Polymer System EP22 is an aluminum filled, two component epoxy adhesive for high performance bonding, sealing, and coating. It is formulated to cure at room temperature or more rapidly at elevated temperatures, with a non-critical one-to-one mix ratio by weight or volume. The EP22... [See More]
- Industry: Aerospace; Automotive; Electronics; Electric Power; Marine; OEM or Industrial; Semiconductors, IC's; Tooling
- Composition: Filled
- Chemical System: Epoxy
- Cure / Technology: Thermoset; Two Component
from Hernon Manufacturing, Inc.
External Ammunition Sealant 76041 is a single component U.V. anaerobic sealant. 76041 has a low viscosity penetrating material capable of bonding and sealing primers and case mouths in ammunition. It is specially formulated for pre-assembled components; it works by capillary action sealing... [See More]
- Industry: Aerospace; Automotive; Electronics; Electric Power; Military; OEM or Industrial
- Features: Sealant
- Cure / Technology: Thermoset; UV or Radiation Cured; Single Component; Room Temperature Vulcanizing or Curing
from Ellsworth Adhesives
Bostik STR350A Adhesive/Sealant is a one component, silyl modified polymer that is used for bonding and sealing in the automotive industry. It is solvent, isocyanate, and PVC free and offers good UV-resistance and aging properties. 10.1 oz Cartridge. [See More]
- Industry: Automotive
- Features: Sealant
- Cure / Technology: Single Component
- Tensile (Break): 261
from CHT USA Inc.
CHT ’s AS1803 is a white, non-corrosive, neutral cure 1-part RTV silicone adhesive sealant. This product will not corrode copper or its alloys and is designed for use with electronic components. It is part of CHT's range of Acetone cure products which are all solvent free. It features a fast... [See More]
- Industry: Automotive; Electronics
- Cure / Technology: Single Component; Acetone
- Chemical System: Silicone
- Features: Flame Retardant; UL Rating
from Master Bond, Inc.
EP36FR is a one component, high performance epoxy that meets the Airbus standards from ABD0031, Issue F, June 8, 2005 for flame retardancy. It is used in all kinds of aircraft applications where protection is needed from flames, smoke and materials that might burn. [See More]
- Industry: Aerospace; Automotive; Electronics; Electric Power; Photonics; OEM or Industrial; Semiconductors, IC's; Aerospace
- Composition: Unfilled
- Chemical System: Epoxy
- Cure / Technology: Thermoset; Single Component
from Hernon Manufacturing, Inc.
External Ammunition Sealant 76060 is a single component U.V. anaerobic sealant. 76060 has a low viscosity penetrating material capable of bonding and sealing primers and case mouths in ammunition. It is specially formulated for pre-assembled components; it works by capillary action sealing... [See More]
- Industry: Aerospace; Automotive; Electronics; Electric Power; Military; OEM or Industrial
- Features: Sealant
- Cure / Technology: Thermoset; UV or Radiation Cured; Single Component; Room Temperature Vulcanizing or Curing
from Ellsworth Adhesives
Bostik STR350A Adhesive/Sealant is a one component, silyl modified polymer that is used for bonding and sealing in the automotive industry. It is solvent, isocyanate, and PVC free and offers good UV-resistance and aging properties. 20 oz Sausage. [See More]
- Industry: Automotive
- Features: Sealant
- Cure / Technology: Single Component
- Tensile (Break): 261
from CHT USA Inc.
CHT's AS1707 is a 1-part, alkoxy cured, thermally conductive, low volatile, RTV silicone adhesive paste. AS1707 is formulated to meet the requirements for use as a space grade adhesive. AS1707 has low thermal outgassing properties and a wide operational temperature range. In addition to meeting... [See More]
- Industry: Automotive; Electronics
- Cure / Technology: Single Component; Alkoxy
- Chemical System: Silicone
- Features: Flame Retardant; Thermally Conductive; UL Rating
from Master Bond, Inc.
One part, nano silica filled UV22DC80-10F has the ability to cure in shadowed out areas. It features a UV and heat curing mechanism. Some noteworthy properties include optical clarity, excellent dimensional stability and outstanding physical strength. [See More]
- Industry: Aerospace; Automotive; Electronics; Electric Power; Marine; Photonics; OEM or Industrial; Semiconductors, IC's
- Composition: Filled
- Chemical System: UV Curing
- Cure / Technology: UV or Radiation Cured; Single Component; Dual Curing
from Hernon Manufacturing, Inc.
External Ammunition Sealant 76061 is a single component U.V. anaerobic sealant. 76061 has a low viscosity penetrating material capable of bonding and sealing primers and case mouths in ammunition. It is specially formulated for pre-assembled components; it works by capillary action sealing... [See More]
- Industry: Aerospace; Automotive; Electronics; Electric Power; Military; OEM or Industrial
- Features: Sealant
- Cure / Technology: Thermoset; UV or Radiation Cured; Single Component; Room Temperature Vulcanizing or Curing
from Ellsworth Adhesives
Bostik Thermogrip 6363 Hot Melt Adhesive is a medium setting, general purpose glue stick that is used for assemblies and automotive applications. 0.5 in x 15 in Sticks, 25 lb Case. [See More]
- Industry: Automotive
- Viscosity: 8875 to 33500
- Cure / Technology: Thermoplastic / Hot Melt; Single Component
from Master Bond, Inc.
Master Bond X21 is a specially formulated one component system for bonding and priming polyolefinic surfaces. X21 is a very low viscosity( <250 cps) solvent based system that is easy to apply and process. Most often, it is used as a primer to promote adhesion of polyolefinic substrates to other... [See More]
- Industry: Aerospace; Automotive; Electronics; Electric Power; Marine; OEM or Industrial; Semiconductors, IC's; Tooling
- Composition: Unfilled
- Chemical System: Elastomeric
- Cure / Technology: Thermoset; Single Component
from Hernon Manufacturing, Inc.
External Ammunition Sealant 76081 is a single component U.V. anaerobic sealant. 76081 has a low viscosity penetrating material capable of bonding and sealing primers and case mouths in ammunition. This Sealant is specially formulated for Ammunition that needs greater fit tolerance and higher bullet... [See More]
- Industry: Aerospace; Automotive; Electronics; Electric Power; Military; OEM or Industrial
- Features: Sealant
- Cure / Technology: Thermoset; UV or Radiation Cured; Single Component; Room Temperature Vulcanizing or Curing
from Ellsworth Adhesives
Bostik Thermogrip ® H9446 Light Yellow is a hot melt adhesive with high shear, short open time and extreme heat resistance. Allows for quick bonds in a variety of product assembly and automotive applications. 30 lb Case. [See More]
- Industry: Automotive
- Viscosity: 7200 to 23600
- Cure / Technology: Thermoplastic / Hot Melt; Single Component
from Master Bond, Inc.
MasterSil 973S-LO is a two component, silver filled silicone with superb electrical and thermal conductivity. Its exceptionally low volume resistivity allows it to be used for many different applications involving bonding, sealing and coating. It is a paste like system with minimal flow. Its... [See More]
- Industry: Aerospace; Automotive; Electronics; Electric Power; Marine; Military; Photonics; OEM or Industrial; Semiconductors, IC's
- Composition: Filled
- Chemical System: Silicone
- Cure / Technology: Thermoset; Two Component ; Addition Cure
from Hernon Manufacturing, Inc.
External Ammunition Sealant 76082 is a single component U.V. anaerobic sealant. 76082 has a low viscosity penetrating material capable of bonding and sealing primers and case mouths in ammunition. This Sealant is specially formulated for Ammunition that needs greater fit tolerance and higher bullet... [See More]
- Industry: Aerospace; Automotive; Electronics; Electric Power; Military; OEM or Industrial
- Features: Sealant
- Cure / Technology: Thermoset; UV or Radiation Cured; Single Component; Room Temperature Vulcanizing or Curing
from Ellsworth Adhesives
Dow DOWSIL ™ 730 FS Solvent Resistant Sealant White is a one component, non-slumping, fluorosilicone paste that is used for bonding, sealing, repairing, or assembling applications that are exposed to moisture, extreme temperatures, shock, oils, solvents, fuels, and swelling effects. It offers... [See More]
- Industry: Aerospace; Automotive
- Cure / Technology: Single Component
- Chemical System: Silicone
- Features: Sealant
from Master Bond, Inc.
EP3HTSDA-1 is a one part, highly electrically conductive epoxy designed for die attach applications. It dispenses smoothly and easily, without tailing. Its easy handling and desirable performance properties, such as thermal conductivity, die shear strength and dimensional stability, allow it to be... [See More]
- Industry: Aerospace; Automotive; Electronics; Electric Power; Marine; Photonics; OEM or Industrial; Semiconductors, IC's
- Composition: Unfilled
- Chemical System: Epoxy
- Cure / Technology: Thermoset; Single Component
from Hernon Manufacturing, Inc.
External Ammunition Sealant 76083 is a single component U.V. anaerobic sealant. 76083 has a low viscosity penetrating material capable of bonding and sealing primers and case mouths in ammunition. This Sealant is specially formulated for Ammunition that needs greater fit tolerance and higher bullet... [See More]
- Industry: Aerospace; Automotive; Electronics; Electric Power; Military; OEM or Industrial
- Features: Sealant
- Cure / Technology: Thermoset; UV or Radiation Cured; Single Component; Room Temperature Vulcanizing or Curing
from Ellsworth Adhesives
Dow DOWSIL ™ 730 Solvent Resistant Sealant White is a one component, non-slumping, fluorosilicone paste that is used for bonding, sealing, repairing, or assembling applications that are exposed to moisture, extreme temperatures, shock, oils, solvents, fuels, and swelling effects. It offers... [See More]
- Industry: Aerospace; Automotive
- Cure / Technology: Single Component
- Chemical System: Silicone
- Features: Sealant
from Master Bond, Inc.
Master Bond EP17HTS-DA is a one part die attach epoxy that is electrically conductive and withstands high temperatures. [See More]
- Industry: Aerospace; Automotive; Electronics; Electric Power; Marine; Photonics; OEM or Industrial; Semiconductors, IC's
- Composition: Filled
- Chemical System: Polyphenylene Sulfide; Epoxy
- Cure / Technology: Thermoset; Single Component
from Hernon Manufacturing, Inc.
External Ammunition Sealant 76084 is a single component U.V. anaerobic sealant. 76084 has a low viscosity penetrating material capable of bonding and sealing primers and case mouths in ammunition. This Sealant is specially formulated for Ammunition that needs greater fit tolerance and higher bullet... [See More]
- Industry: Aerospace; Automotive; Electronics; Electric Power; Military; OEM or Industrial
- Features: Sealant
- Cure / Technology: Thermoset; UV or Radiation Cured; Single Component; Room Temperature Vulcanizing or Curing
from Ellsworth Adhesives
Dow DOWSIL ™ EA-7300 Silicone Adhesive is designed for automotive electronic applications such as battery packs, EV controllers, sensors, modules, housings, and more. It provides durable bonds, excellent stress relief, high elongation, and non-slumping properties. 15 kg Pail. [See More]
- Industry: Automotive
- Cure / Technology: Single Component
- Chemical System: Silicone
- Tensile (Break): 425
from Master Bond, Inc.
EP35SP is a two component epoxy system specially formulated to resist high temperatures and aggressive chemicals. It has a paste viscosity with little to no flow when curing. [See More]
- Industry: Aerospace; Automotive; Electronics; Electric Power; Marine; Photonics; OEM or Industrial; Semiconductors, IC's; Downhole
- Composition: Unfilled
- Chemical System: Epoxy
- Cure / Technology: Thermoset; Two Component
from Hernon Manufacturing, Inc.
Ammunition Primer Sealant 34194 is a single component 100% solid system offering a tough, dry coating with superior chemical and environmental resistance after cure. Ammunition Primer Sealant 34194 will cure rapidly when exposed to high intensity U.V. light. This coating is formulated to migrate... [See More]
- Industry: Aerospace; Automotive; Electronics; Electric Power; Military; OEM or Industrial
- Features: Sealant
- Cure / Technology: UV or Radiation Cured; Single Component
from Ellsworth Adhesives
Dow DOWSIL ™ EA-7300 Silicone Adhesive is designed for automotive electronic applications such as battery packs, EV controllers, sensors, modules, housings, and more. It provides durable bonds, excellent stress relief, high elongation, and non-slumping properties. 600 g Cartridge. [See More]
- Industry: Automotive
- Cure / Technology: Single Component
- Chemical System: Silicone
- Tensile (Break): 425
from Master Bond, Inc.
Master Bond EP30LTE-2 is a two part epoxy with an extraordinarily low coefficient of thermal expansion (CTE).It is used for bonding, sealing, coating and encapsulating. [See More]
- Industry: Aerospace; Automotive; Electronics; Electric Power; Marine; Photonics; OEM or Industrial; Semiconductors, IC's; Tooling
- Composition: Unfilled
- Chemical System: Epoxy
- Cure / Technology: Thermoset; Two Component ; Room Temperature Vulcanizing or Curing
from Hernon Manufacturing, Inc.
Brake Bonder 362 is a black heat curing, nitrile/phenolic solvent-based adhesive. Cured Brake Bonder 362 furnishes excellent resistance to thermal shock, chemicals, and water. The cured bond withstands temperatures exceeding 600 °F (315 °C). The primary application for Brake Bonder 362 is... [See More]
- Industry: Aerospace; Automotive; Electronics; Electric Power; Military; OEM or Industrial
from Ellsworth Adhesives
Dow DOWSIL ™ TC-5150 Blue is a one component, high performance, non-curable, thermally conductive gap filler designed to dissipate heat from electronics to a heat sink providing a reliable cooling solution for a wide variety of substrates. It is reworkable, easy to dispense, has low thermal... [See More]
- Industry: Automotive; Electronics; Semiconductors, IC's
- Features: Leveling Filling; Thermally Conductive
- Cure / Technology: Single Component
- Viscosity: 2360
from Master Bond, Inc.
EP93FRHT is a two component epoxy that readily passes the Airbus specifications for flame resistance, smoke emission and toxic gas emission as listed under ABD 0031, Issue F. These tests focus on how quickly this adhesive will self extinguish when subjected to a vertical burn test, optical density... [See More]
- Industry: Aerospace; Automotive; Electronics; Electric Power; Marine; Photonics; OEM or Industrial; Semiconductors, IC's
- Composition: Unfilled
- Chemical System: Epoxy
- Cure / Technology: Thermoset; Two Component ; Room Temperature Vulcanizing or Curing
from Hernon Manufacturing, Inc.
Fusionbond ® 370 is a two components methacrylate adhesive. It is specially formulated for structural bonding of thermoplastics, metal, wood and composite assemblies. Fusionbond ® 370 is an excellent choice for composite bonding applications in the marine, automotive and construction... [See More]
- Industry: Aerospace; Automotive; Electronics; Electric Power; Military; OEM or Industrial
- Cure / Technology: Two Component
from Ellsworth Adhesives
HARDMAN DOUBLE/BUBBLE 4022 Urethane D-50 is Beige in color, two component, extra fast setting, structural adhesive that is used for bonding and repairing automotives, conveyor belts, sports equipment, laminated surfaces, and thermoplastics. It offers good peel and shear strength, fatigue and impact... [See More]
- Industry: Automotive
- Cure / Technology: Two Component
- Chemical System: Polyurethane
- Viscosity: 10000
from Master Bond, Inc.
Master Bond Polymer Adhesive EP51 is a fast "5 minute" curing two component epoxy adhesive for general purpose bonding formulated to cure at room temperature with a one-to-one mix ratio by weight or volume. It readily develops a high bonding strength of more than 2000 psi at room temperature. The... [See More]
- Industry: Aerospace; Automotive; Electronics; Electric Power; Marine; OEM or Industrial; Semiconductors, IC's; Tooling
- Composition: Unfilled
- Chemical System: Epoxy
- Cure / Technology: Thermoset; Two Component
from Hernon Manufacturing, Inc.
Fusionbond ® 371 is a two components methacrylate adhesive. It is specially formulated for structural bonding of thermoplastics, metal, wood and composite assemblies. Fusionbond ® 371 is an excellent choice for composite bonding applications in the marine, automotive and construction... [See More]
- Industry: Aerospace; Automotive; Electronics; Electric Power; Military; OEM or Industrial
- Cure / Technology: Two Component
from Ellsworth Adhesives
Henkel Loctite 271 Red Threadlocker is a one component, high strength threadlocker designed for permanent locking and sealing of threaded fasteners. This product complies to MIL-S-46163A. 10 mL Bottle. [See More]
- Industry: Automotive
- Cure / Technology: Anaerobic; Single Component
- Chemical System: Acrylic
- Features: Sealant; Threadlocker or Retainer
from Master Bond, Inc.
Master Bond Polymer System EP39-2 is a fast curing, low viscosity, optically clear two component epoxy system for high performance bonding, sealing, coating and casting. It is 100% reactive and does not contain any diluents, solvents or other volatiles. The mix ratio is a convenient 2 to 1 by... [See More]
- Industry: Aerospace; Automotive; Electronics; Electric Power; Marine; Photonics; OEM or Industrial; Semiconductors, IC's; Tooling
- Composition: Unfilled
- Chemical System: Epoxy
- Cure / Technology: Thermoset; Two Component
from Hernon Manufacturing, Inc.
Hernon ® has taken the excellent bond strength of Fusionbond adhesive family and merged it with the simplicity of a two-component, no-mix curing system to create Fusionbond ® 374. Fusionbond ® 374 is a 100% solid, room temperature cure, versatile structural adhesive which is used in... [See More]
- Industry: Aerospace; Automotive; Electronics; Electric Power; Military; OEM or Industrial
- Cure / Technology: Two Component
from Ellsworth Adhesives
Henkel Loctite 271 Red Threadlocker is a one component, high strength threadlocker designed for permanent locking and sealing of threaded fasteners. This product complies to MIL-S-46163A. 250 mL Bottle. [See More]
- Industry: Automotive
- Cure / Technology: Anaerobic; Single Component
- Chemical System: Acrylic
- Features: Sealant; Threadlocker or Retainer
from Master Bond, Inc.
Supreme 34CA exhibits exceptional resistance to aggressive chemicals. It features long term durability and bonds well to metals, glass, ceramics and plastics. It withstands both high and low temperatures. [See More]
- Industry: Aerospace; Automotive; Electronics; Electric Power; Marine; Photonics; OEM or Industrial; Semiconductors, IC's
- Composition: Unfilled
- Chemical System: Epoxy
- Cure / Technology: Two Component
from Hernon Manufacturing, Inc.
Fusionbond ® 375 is a highly thixotropic, two component, room temperature curing, 1:1 ratio, methacrylate adhesive system. Fusionbond ® 375 is formulated to provide fixturing strength within 7 to 10 minutes. This adhesive product forms resilient bonds and maintains its strength over a wide... [See More]
- Industry: Aerospace; Automotive; Electronics; Electric Power; Military; OEM or Industrial
- Cure / Technology: Two Component
- Chemical System: Vinyl; Acrylic
- Substrate Compatibility: Metal; Plastic; PVC, acrylic, ABS, stainless steel, and some types of fiberglass
from Ellsworth Adhesives
Henkel Loctite 271 Red Threadlocker is a one component, high strength threadlocker designed for permanent locking and sealing of threaded fasteners. This product complies to MIL-S-46163A. 50 mL Bottle. [See More]
- Industry: Automotive
- Cure / Technology: Anaerobic; Single Component
- Chemical System: Acrylic
- Features: Sealant; Threadlocker or Retainer
from Master Bond, Inc.
Master Bond X-5 is specially formulated, synthetic elastomer-based, one component adhesive for high performance bonding and sealing. This synthetic elastomer based adhesive bonds well in both shear and peel to similar and dissimilar surfaces including metals, woods, most plastics, ceramics, glass,... [See More]
- Industry: Aerospace; Automotive; Electronics; Electric Power; Marine; Military; OEM or Industrial; Semiconductors, IC's; Tooling
- Composition: Unfilled
- Chemical System: Elastomeric
- Cure / Technology: Thermoset; Single Component
from Hernon Manufacturing, Inc.
Grenade Igniter Case Sealant 40995 is a single component anaerobic thread locking and sealing adhesive. Grenade Igniter Case Sealant 40995 is a low viscosity penetrating material that works by capillary action between mating surfaces. The cured adhesive is a high-performance thermoset plastic... [See More]
- Industry: Aerospace; Automotive; Electronics; Electric Power; Military; OEM or Industrial
- Features: Sealant
- Cure / Technology: Thermoset; UV or Radiation Cured; Single Component; Room Temperature Vulcanizing or Curing
from Ellsworth Adhesives
Henkel Loctite 3494 is a UV/Visible light curing acrylic adhesive that cures in seconds to form an impact resistant bond that exhibits excellent resistance to prolonged humidity or water immersion. 25 mL Syringe. [See More]
- Industry: Automotive
- Viscosity: 5000 to 7000
- Cure / Technology: Single Component
- Tensile (Break): 3270
from Master Bond, Inc.
Master Bond Polymer System EP31 is a two component room temperature curing epoxy for high performance structural bonding applications featuring lap shear strengths exceeding 4500 psi. In addition, unlike many structural epoxies, EP31 also has a high peel strength exceeding 40 pli. The service... [See More]
- Industry: Aerospace; Automotive; Electronics; Electric Power; Marine; OEM or Industrial; Semiconductors, IC's; Tooling
- Cure / Technology: Thermoset; Two Component
- Chemical System: Epoxy
- Features: Flexible; High Dielectric; Electrically Conductive; EMI/RFI Shielding; Laminaes; Sealant; Anti-static, ESD
from Hernon Manufacturing, Inc.
Grenade Igniter Case Sealant 47422 is a single component UV and anaerobic curing adhesive. Grenade Igniter Case Sealant 47422 is a low viscosity penetrating material that works by capillary action between mating surfaces. The cured adhesive is a high performance thermoset plastic suitable for... [See More]
- Industry: Aerospace; Automotive; Electronics; Electric Power; Military; OEM or Industrial
- Features: Sealant
- Cure / Technology: Thermoset; UV or Radiation Cured; Single Component; Room Temperature Vulcanizing or Curing
from Ellsworth Adhesives
Henkel Loctite 4210 Black is a one component, high viscosity, thermal resistant, cyanoacrylate adhesive. It is toughened with elastomers for impact and peel strength as well as improved resistance to hot and humid environments. 20 g Bottle. [See More]
- Industry: Automotive
- Cure / Technology: Single Component
- Chemical System: Cyanoacrylate
- Features: Thermally Conductive
from Master Bond, Inc.
Master Bond Polymer System EP45HT is a two component epoxy system for high performance structural bonding and casting. It is suitable for applications where long term exposure to temperatures from -80 °F to +500 °F is required. lt is 100% reactive and does not contain any solvents or... [See More]
- Industry: Aerospace; Automotive; Electronics; Electric Power; Marine; Military; Photonics; OEM or Industrial; Semiconductors, IC's; Tooling
- Composition: Unfilled
- Chemical System: Epoxy
- Cure / Technology: Thermoset; Two Component
from Hernon Manufacturing, Inc.
HASA 39781 is a single-component, anaerobic, structural adhesive designed for bonding rigid assemblies. HASA 39781 cure is accomplished when mating surfaces including metal, glass and ceramics are joined together. Accelerated cures are possible with the application of primers or by a short, low... [See More]
- Industry: Aerospace; Automotive; Electronics; Electric Power; Military; OEM or Industrial
- Cure / Technology: Thermoset; Single Component
- Chemical System: Ceramic
from Ellsworth Adhesives
Henkel Loctite 4211 is a one component, high viscosity, thermal resistant, cyanoacrylate adhesive. It is toughened with elastomers for impact and peel strength as well as improved resistance to hot and humid environments. 20 g Bottle. [See More]
- Industry: Automotive
- Cure / Technology: Single Component
- Chemical System: Cyanoacrylate
- Features: Thermally Conductive
from Master Bond, Inc.
Master Bond Polymer System EP13 is a one component heat curing epoxy featuring high shear strength and very high temperature resistance. This one component system is formulated to cure at temperatures from 300 °F to 350 °F for 60-90 minutes. Upon cure, EP13 readily attains tensile shear... [See More]
- Industry: Aerospace; Automotive; Electronics; Electric Power; Marine; Military; OEM or Industrial; Semiconductors, IC's; Tooling
- Composition: Unfilled
- Chemical System: Epoxy
- Cure / Technology: Thermoset; Single Component
from Hernon Manufacturing, Inc.
HASA 66071 is a single component structural anaerobic adhesive formulated for bonding rigid assemblies at high temperatures. HASA 66071 cures when it is confined between mating surfaces. Hernon ® Primer 50 accelerates the cure. [See More]
- Industry: Aerospace; Automotive; Electronics; Electric Power; Military; OEM or Industrial
- Cure / Technology: Single Component
from Ellsworth Adhesives
Henkel Loctite 5145 is formulated for bonding, sealing, and coating of military, automotive, and industrial electronic devices. It resists weathering, moisture, ozone, and keeps its properties through severe environments. 3 oz Tube. [See More]
- Industry: Automotive; Military
- Cure / Technology: Single Component
- Chemical System: Silicone
- Features: Sealant
from Master Bond, Inc.
Master Bond Polymer System 125 is a two component toughened epoxy resin for prolonged service above 500 °F with truly outstanding chemical resistance. High strength bonds serviceable up to 600 °F can be obtained with this exceptionally thermally stable and chemically resistant epoxy resin... [See More]
- Industry: Aerospace; Automotive; Electronics; Electric Power; Marine; Photonics; OEM or Industrial; Semiconductors, IC's; Tooling
- Composition: Unfilled
- Chemical System: Epoxy
- Cure / Technology: Thermoset; Two Component
from Hernon Manufacturing, Inc.
HASA 716 is a single component structural anaerobic adhesive formulated for bonding rigid assemblies at high temperatures. This high strength acrylic adhesive cures when it is confined between mating surfaces. Utilized for bonding magnets in motor assemblies and structural applications, HASA 716... [See More]
- Industry: Aerospace; Automotive; Electronics; Electric Power; Military; OEM or Industrial
- Cure / Technology: Single Component
- Chemical System: Acrylic
from Ellsworth Adhesives
Parker LORD ® 320 General Purpose Epoxy Adhesive Resin Part A Off-White is a two component adhesive used for primerless adhesion to automotive sheet molded compounds. It offers durability, contains no solvent, and resists humidity, sunlight, other temperature extremes. 5 gal Pail. [See More]
- Industry: Automotive
- Cure / Technology: Two Component
- Chemical System: Epoxy
- Viscosity: 300000 to 1.00E6
from Master Bond, Inc.
Master Bond Polymer Adhesive EP33 is a unique room temperature curing two component epoxy adhesive for high temperature bonding applications. It is formulated to cure at room temperature or more rapidly at elevated temperatures. Master Bond Polymer Adhesive EP33 produces high strength bonds whose... [See More]
- Industry: Aerospace; Automotive; Electronics; Electric Power; Marine; OEM or Industrial; Semiconductors, IC's; Tooling
- Composition: Unfilled
- Chemical System: Epoxy
- Cure / Technology: Thermoset; Two Component
from Hernon Manufacturing, Inc.
HASA 718 is a single component structural anaerobic adhesive formulated for bonding rigid assemblies. HASA 718 cures when it is confined between mating surfaces. Hernon? Activator 56 accelerates the cure. [See More]
- Industry: Aerospace; Automotive; Electronics; Electric Power; Military; OEM or Industrial
- Cure / Technology: Single Component
from Ellsworth Adhesives
Parker LORD ® 322 Epoxy Adhesive Hardener Gray is a two component, general purpose epoxy system that is used for primerless bonding to automotive sheet molded compounds, rubber, plastics, polyester thermosets, and prepared metals. It is resistant to sunlight, humidity, extreme temperatures, and... [See More]
- Industry: Automotive
- Cure / Technology: Two Component
- Chemical System: Epoxy
- Substrate Compatibility: Metal; Plastic; Rubber or Elastomer
from Graphene Laboratories, Inc.
DESCRIPTION: G6E-NS10 ™ epoxy is developed for general purpose applications requiring high performance bond or connection of electrically conductive components/materials for enhanced electrical conductivity. G6E-NS10 ™ has been developed based on advanced proprietary technology that... [See More]
- Industry: Aerospace; Automotive; Electronics; Electric Power; Military; OEM or Industrial; PCB Manufacture / Repair, EMI / RFI Shielding, Display Packaging / Bonding, Solder Replacement
- Composition: Filled
- Chemical System: Epoxy
- Cure / Technology: Thermoset; Two Component
from Henkel Corporation - Industrial
Loctite ® QuickTite ® Gel is a multi-purpose gel instant adhesive for Automotive Aftermarket repairs. A premium instant adhesive that is fast acting and provides a stronger, longer lasting bond on a variety of materials such as plastic, rubber and metal. The no-run gel formula stays... [See More]
- Industry: Automotive
from Sauereisen, Inc.
Sauereisen Insa-Lute Adhesive Cement No. 1 is specified throughout the automotive, appliance and assembly industries. for bonding, insulating, and encapsulating applications. A thermally conductive and electrically insulating cement paste,. the material bonds well to metal, ceramics and glass. Upon... [See More]
- Industry: Automotive; OEM or Industrial; Appliance Assembly
- Composition: Unfilled
- Chemical System: Ceramic
- Cure / Technology: Air Setting / Film Drying; Single Component
from Wacker Chemical Corp.
ELASTOSIL ® RT 728 A/B is a paste-like, thermally curable, two-part silicone rubber. Vulcanized parts show excellent coolant resistance and a low compression set. Special features. adhesion on synthetic material. long-term flexibility over a temperature range from. -50 °C to +200 °C. [See More]
- Industry: Automotive
- Cure / Technology: Thermoset; Two Component
- Chemical System: Elastomeric; Silicone
- Viscosity: 1.00E6 to 1.20E6
from Aremco Products, Inc.
Hi-temp, low viscosity, easy to use, offered in alternative pigments [See More]
- Industry: Automotive; OEM or Industrial; Bonding Fiberoptic Strands
- Composition: Unfilled
- Chemical System: Silicone
- Cure / Technology: Thermoset
from Epoxy Technology
EPO-TEK ® 730 is a two component, thixotropic, room temperature-curing epoxy adhesive. [See More]
- Industry: Automotive; Electronics; Marine
- Cure / Technology: Thermoset; Two Component ; Room Temperature Vulcanizing or Curing
- Chemical System: Epoxy
- Substrate Compatibility: Ceramic, Glass; Metal; Plastic; Wood
from Hi-Tech Seals, Inc.
The Nuts N ’ Bolts is an anaerobic adhesive, used in nut and bolt assemblies. When the adhesive is confined between substrates, the oxygen is eliminated and the adhesive cures. These thread locking adhesives offer a wide-range of strengths, viscosities, and temperature ranges for just about... [See More]
- Industry: Automotive; OEM or Industrial
- Cure / Technology: Anaerobic; Single Component
- Chemical System: Acrylic
- Type / Form: Liquid
from DuPont Electronics & Imaging
DuPont ™ Pyralux ® LF-B is DuPont ™ Kapton ® B black polyimide film coated with acrylic ideal for products where uniform matte black appearance is desired. The coverlay is made with the leading DuPont ™ Kapton ® brand black polyimide film for high performance... [See More]
- Industry: Automotive; Electronics; Military; OEM or Industrial
- Type / Form: Sheet or Film
- Chemical System: Polyimide; Acrylic
- Features: High Dielectric
from ThreeBond International, Inc.
Anaerobic Adhesives are acrylic liquid gasket adhesives that cure upon exposure to metal and removal of oxygen supply. They are typically used for the bonding and sealing of screws (threadlocks) and other interlocking parts. Upon full curing, within 24 hours, they become heat resistant. Many... [See More]
- Industry: Automotive
- Substrate Compatibility: Metal; Rubber or Elastomer
- Cure / Technology: Anaerobic
- Viscosity: 150
from Chemence Inc.
Krylex KB014 is a low viscosity, surface insensitive cyanoacrylate instant adhesive. It provides excellent adhesion to plastics, metals and elastomers as well as acidic surfaces such as wood, leather and paper. Krylex KB014 provides high strength bonds within seconds and achieves full cure within 24... [See More]
- Industry: Automotive; Electronics; Construction; OEM or Industrial
- Cure / Technology: Two Component (optional feature); Single Component; Reactive or Moisture Cured (optional feature)
- Chemical System: Cyanoacrylate
- Type / Form: Liquid
from Sheldahl Flexible Technologies - a Flex company
We have core strength in vacuum deposition via sputtering ad thermal evaporation. Our materials are used for numerous applications, including passive thermal control for satellites and launch vehicles, thermal insulation for F1 racing cars and fire suits, and robust materials for audio and medical... [See More]
- Industry: Aerospace; Automotive; Electronics; Sanitary; Military; OEM or Industrial
- Features: Flame Retardant; Laminaes; Thermal Insulation
from Epoxies Etc...
These high bond strength adhesives are clear 100% solids, two component, low viscosity adhesives with a quick setting time of 5-46 minutes at room temperature. They are excellent for bonding plated metals, pewter, glass, wood, ceramic, felt, cement, gem stones, most plastics and rubbers, etc. [See More]
- Industry: Automotive; Electronics; Electric Power; OEM or Industrial; Jewelry
- Composition: Unfilled
- Chemical System: Epoxy
- Cure / Technology: Thermoset; Two Component ; Room Temperature Vulcanizing or Curing
from Aron Alpha Industrial Krazy Glue (Toagosei America, Inc.)
Good for moist and heat resistance in rubber [See More]
- Industry: Automotive
- Cure / Technology: Single Component
- Chemical System: Cyanoacrylate
- Type / Form: Liquid
from Protavic America, Inc.
PNS-56225 ™ is a two-component clear ONE TO ONE MIX RATIO room temperature cure silicone encapsulant. It is designed for clear LED potting, encapsulation by casting of completed circuit boards, hybrid circuits, and power supplies, where flexibility, reparability, and high temperature... [See More]
- Industry: Automotive; Electronics; Electric Power; OEM or Industrial; Semiconductors, IC's
- Composition: Unfilled
- Chemical System: Silicone
- Cure / Technology: Thermoset; Two Component
from Shenzhen DeepMaterial Technologies Co., Ltd
Suitable for stress-sensitive materials, PC/PVC strong bonding. This product shows excellent adhesion to most substrates including glass, many plastics and most metals. [See More]
- Industry: Automotive; Electronics; Sanitary; Communication Electronics
- Substrate Compatibility: Ceramic, Glass; Metal; Plastic
- Cure / Technology: UV or Radiation Cured; Single Component
- Use Temperature: -67 to 302
from Graphene Laboratories, Inc.
DESCRIPTION: Traditional silver-based adhesives require up to 80% weight load of silver fillers and as a result tend to be costly, brittle and prone to mechanical failure. G6E-NS11 ™ has been developed based on advanced proprietary technology that requires 15% or less silver content to be at... [See More]
- Industry: Aerospace; Automotive; Electronics; Electric Power; Military; OEM or Industrial; PCB Manufacture / Repair, EMI / RFI Shielding, Display Packaging / Bonding, Solder Replacement
- Composition: Filled
- Chemical System: Epoxy
- Cure / Technology: Thermoset; Two Component
from Henkel Corporation - Industrial
Loctite ® QuickTite ® is a multi-purpose liquid instant adhesive for Automotive Aftermaket repairs. A premium instant adhesive that is faster acting and provides a stronger, longer lasting bond on a variety of materials such as plastic, rubber and metal. The tube is self-piercing with a... [See More]
- Industry: Automotive
from Hi-Tech Seals, Inc.
The Quantum ® group of HERNON ® cyanoacrylates offers specialized performance attributes. This range of grades has been engineered to provide solutions to specific cyanoacrylate challenges. Three categories are offered: surface insensitive, toughened, and low odor-low blooming. [See More]
- Industry: Automotive; OEM or Industrial
- Cure / Technology: Single Component; Room Temperature Vulcanizing or Curing
- Chemical System: Cyanoacrylate
- Type / Form: Liquid
from ThreeBond International, Inc.
Elastic Bonding Adhesives. ThreeBonds ’ industrial elastic adhesives ’ major components are special polymer (non-solvent-based and moisture curable) and synthetic rubber (solvent-based).). They have good initial adhesion and will not lose their elasticity after bonding. No primer is... [See More]
- Industry: Automotive
- Substrate Compatibility: Rubber or Elastomer
- Cure / Technology: Anaerobic; Reactive or Moisture Cured; Room Temperature Vulcanizing or Curing
- Viscosity: 100000
from Chemence Inc.
KG105 is a single component, thixotropic, low-medium strength, high temperature anaerobic gasket compound. KG105 cures rapidly when confined in the absence of air on close-fitting metal surfaces. KG105 will give an almost instant low-pressure seal (up to 0.5 Bar after 20 mins.) to allow on-line... [See More]
- Industry: Automotive; Construction; OEM or Industrial
- Cure / Technology: Anaerobic; Two Component (optional feature); Single Component
- Chemical System: Dimethacrylate
- Features: Sealant
from Protavic America, Inc.
ANA-97773 is a very fast curing adhesive that is fully cured and at its ultimate hardness in seconds. Other similar UV materials continue to harden for several minutes causing continued shrinkage and movement. Bond lines are clear, colorless and exhibit low shrinkage during the curing process. [See More]
- Industry: Automotive; Electronics; Electric Power; OEM or Industrial; Semiconductors, IC's
- Cure / Technology: Thermoset; Two Component ; UV or Radiation Cured
- Composition: Unfilled
- Type / Form: Liquid
from Graphene Laboratories, Inc.
G6 Epoxy® is excited to announce the release of our latest product - a one-component electrically conductive epoxy. This innovative solution provides excellent electrical conductivity and bonding strength in a single component formula, making it easier and more convenient to use than traditional... [See More]
- Industry: Aerospace; Automotive; Electronics; Electric Power; OEM or Industrial
- Cure / Technology: Thermoset; Single Component
- Chemical System: Epoxy
- Features: Electrically Conductive; Sealant
from Henkel Corporation - Industrial
Loctite ® Klean 'N Prime ™ Anaerobic Activator is a solvent based primer that features very long on-part life. Use to speed the cure of all Loctite anaerobic products and ensure proper cure on inactive metals. Ideal for cure conditions below room temperature. Typical Applications: All nut... [See More]
- Industry: Aerospace; Automotive
- Cure / Technology: Anaerobic
from Hi-Tech Seals, Inc.
Self Locker thread locking adhesives are pre-applied products designed for production environments. This line features microscopic glass spheres that remain dry until activated by thread engagement. The shearing action of the engagement breaks the spheres releasing the contained anaerobic thread... [See More]
- Industry: Automotive; OEM or Industrial
- Features: Threadlocker or Retainer
- Chemical System: Acrylic
- Substrate Compatibility: Metal
from ThreeBond International, Inc.
Our Cyanoacrylates are excellent fast acting all-purpose low viscosity adhesives. These instant adhesives cure in seconds for use on a wide range of materials including metals, plastics, rubber, wood, and inorganic materials. ThreeBond offers several types of instant adhesives: gel, low-odor, low... [See More]
- Industry: Automotive
- Substrate Compatibility: Metal; Plastic; Rubber or Elastomer; Wood
- Chemical System: Cyanoacrylate
- Viscosity: 100
from Chemence Inc.
Krylex KT0222 is a low strength, thixotropic anaerobic threadlocker. The low removal torque allows easy disassembly yet provides maximum vibration and shock resistance for threaded parts. Krylex KT0222 is formulated to prevent vibration loosening and to seal against leaks through treaded components. [See More]
- Industry: Automotive; Construction; OEM or Industrial
- Cure / Technology: Anaerobic; Two Component (optional feature); Single Component
- Chemical System: Dimethacrylate
- Type / Form: Liquid
from Protavic America, Inc.
Silver filled epoxy system for coating tantalum capacitor slugs. This product offers ideal protection from moisture and excellent high temperature operation. Consistent operation of 175C is typical. The product is design for use with dipping machines and requires only one blotting stage. Solvent... [See More]
- Industry: Automotive; Electronics; Electric Power; OEM or Industrial; Semiconductors, IC's
- Composition: Filled
- Chemical System: Epoxy
- Cure / Technology: Thermoset; Single Component
from Graphene Laboratories, Inc.
DESCRIPTION: G6E-FRP ™ is a flexible version of our G6E-P ™ general purpose epoxy. G6E-FRP ™ epoxy was developed primarily for high-performance bonding, connection, sealing and coating applications requiring a flexible bond or connection of electrically conductive components or... [See More]
- Industry: Aerospace; Automotive; Electronics; Electric Power; Military; OEM or Industrial; Fiber-Optics Packaging, Flexible Photovoltaic (Solar) Cell Packaging, Surface Acoustic Wave (SAW) Devices
- Composition: Filled
- Chemical System: Epoxy
- Cure / Technology: Thermoset; Two Component
from ThreeBond International, Inc.
These ThreeBond adhesives use epoxy resin as their main component. They are excellent for a myriad of purposes including general purpose adhesion and sealing, and for electronic device bonding, filling, repair, casting and impregnation. Epoxy resins, also known as polyepoxides, are reactive... [See More]
- Industry: Automotive
- Cure / Technology: Single Component
- Chemical System: Epoxy
- Substrate Compatibility: Rubber or Elastomer
from Protavic America, Inc.
Clear unfilled epoxy in a one-part system that can be stored at room temperature for up to 6 months. This material is excellent for ferrite and ceramic bonding applications. Non-hazardous and safe to use. Requires heat assist to cure. [See More]
- Industry: Automotive; Electronics; Electric Power; OEM or Industrial; Semiconductors, IC's
- Composition: Unfilled
- Chemical System: Epoxy
- Cure / Technology: Thermoset; Single Component
from Graphene Laboratories, Inc.
DESCRIPTION: G6E-FXNS ™ epoxy is developed for applications requiring a high-performance flexible bond or connection of electrically conductive components/materials as well as for low electrical resistivity. G6E-FXNS ™ is developed based on advanced proprietary technology that requires... [See More]
- Industry: Aerospace; Automotive; Electronics; Electric Power; Military; OEM or Industrial; Fiber-Optics Packaging, Solder Replacement
- Composition: Filled
- Chemical System: Epoxy
- Cure / Technology: Thermoset; Two Component
from ThreeBond International, Inc.
Electrically Conductive Resins. These Electrically conductive resin can connect multiple electrical contacts simultaneously and make it possible to create an electrical connection in materials that cannot be soldered. They are electro-conductive resins made up of synthetic resin and a conductive... [See More]
- Industry: Automotive; Electronics
- Composition: Filled
- Chemical System: Silicone
- Cure / Technology: Anaerobic
from Protavic America, Inc.
PTS-46303 A/B ™ is a two-component silicone encapsulant designed for encapsulation by casting of completed circuit boards, hybrid circuits, and power supplies, where flexibility, reparability, thermal conductivity, and high temperature resistance are required. Possible applications include... [See More]
- Industry: Automotive; Electronics; Electric Power; OEM or Industrial; Semiconductors, IC's
- Composition: Filled
- Chemical System: Silicone
- Cure / Technology: Thermoset; Two Component
from Graphene Laboratories, Inc.
DESCRIPTION: G6E-FXSG ™ epoxy is primarily developed for applications requiring a high-performance flexible bond or connection of electrically conductive components/materials requiring low electrical resistivity. G6-FXSG ™ is well suited for bonding of dissimilar materials that are... [See More]
- Industry: Aerospace; Automotive; Electronics; Electric Power; Military; OEM or Industrial; Fiber-Optics Packaging, Solder Replacement
- Composition: Filled
- Chemical System: Epoxy
- Cure / Technology: Thermoset; Two Component
from ThreeBond International, Inc.
These products are single-component heat resistant adhesives. They use ceramic and inorganic polymers and provide heat resistance of 1000 C and higher. They offer excellent adhesion with inorganic substances such as ceramics, glass, and metals. They can also be used for filling adhesion and coating... [See More]
- Industry: Automotive
- Substrate Compatibility: Ceramic, Glass; Metal; Rubber or Elastomer
- Cure / Technology: Single Component
- Viscosity: 10000
from Graphene Laboratories, Inc.
DESCRIPTION: G6E-P ™ epoxy is primarily developed for general purpose applications requiring high-performance bond or connection of electrically conductive components/materials. G6E-P ™ is formulated with proprietary nanomaterials and fillers. G6E-P ™ epoxy can be cured at room... [See More]
- Industry: Aerospace; Automotive; Electronics; Electric Power; Military; OEM or Industrial; Photovoltaic (Solar) Cells, Casting, Coating & Encapsulation, Display Packaging / Bonding, Temperature Sensitive Electronics, Solder Replacement
- Composition: Filled
- Chemical System: Epoxy
- Cure / Technology: Thermoset; Two Component
from ThreeBond International, Inc.
Structural adhesives from ThreeBond are impact-resistant and yield a good bond balance of shear bond strength and peel bond strength. These structural adhesives offer two-component (2K) structural adhesive bonds making them impact-resistant and ideal for applications that require fast hardening and... [See More]
- Industry: Automotive
- Cure / Technology: Two Component
- Chemical System: Acrylic
- Substrate Compatibility: Rubber or Elastomer
from Graphene Laboratories, Inc.
DESCRIPTION: G6E-HTC ™ epoxy is developed primarily for applications requiring a high-performance bond or connection of electrically conductive components/materials that operate at higher temperatures. G6E-HTC ™ epoxy ’s properties result from being formulated with proprietary... [See More]
- Industry: Aerospace; Automotive; Electronics; Electric Power; Military; OEM or Industrial; EMI / RFI Shielding, Grounding, Casting, Coating & Encapsulation
- Composition: Filled
- Chemical System: Epoxy
- Cure / Technology: Thermoset; Two Component
from ThreeBond International, Inc.
Our "Gold Label" series contains our highest performing instant adhesives with superior adhesion strength. These cyanoacrylate adhesives possess extremely fast curing properties and offer special functionality to address specific needs. Cyanoacrylates come from a family of strong, fast-acting... [See More]
- Industry: Automotive
- Type / Form: Gel
- Chemical System: Cyanoacrylate
- Substrate Compatibility: Rubber or Elastomer
from Graphene Laboratories, Inc.
DESCRIPTION: G6E-HTNS ™ epoxy is developed primarily for applications requiring a high-performance bond or connection of electrically conductive components/materials which operate at higher temperatures requiring low electrical resistivity. G6E-HTNS ™ is developed based on advanced... [See More]
- Industry: Aerospace; Automotive; Electronics; Electric Power; Military; OEM or Industrial; Radio Frequency Identification (RFID) tags, EMI / RFI Shielding, Solder Replacement
- Composition: Filled
- Chemical System: Epoxy
- Cure / Technology: Thermoset; Two Component
from Graphene Laboratories, Inc.
DESCRIPTION: G6E-HTSG ™ epoxy is primarily developed for applications requiring a high-performance bond or connection of electrically conductive components/materials which operate at higher temperatures and which require low electrical resistivity. G6E-HTSG ™ epoxy is formulated with... [See More]
- Industry: Aerospace; Automotive; Electronics; Electric Power; Military; OEM or Industrial; EMI / RFI Shielding, Grounding, Casting, Coating & Encapsulation, Solder Replacement
- Composition: Filled
- Chemical System: Epoxy
- Cure / Technology: Thermoset; Two Component
from Graphene Laboratories, Inc.
Our G6E-TSHV ™ Epoxy has been specifically developed for general purpose applications that necessitate the bonding or connecting of thermally conductive components/materials. It is designed to provide efficient heat transfer between components or surfaces, while also providing the bonding and... [See More]
- Industry: Aerospace; Automotive; Electronics; Electric Power; Sanitary; Thermal Interface Materials (TIMs), Solar panels
- Composition: Filled
- Chemical System: Epoxy
- Cure / Technology: Two Component ; Room Temperature Vulcanizing or Curing
from Graphene Laboratories, Inc.
DESCRIPTION: G6E-RTC ™ Room Temperature Curable Carbon Filled Electrically Conductive epoxy is developed primarily for applications requiring curing at room temperature. G6E-RTC ™ epoxy is formulated with proprietary nanomaterials and fillers to provide its performance characteristics. [See More]
- Industry: Aerospace; Automotive; Electronics; Electric Power; Military; OEM or Industrial; Photovoltaic (Solar) Cells, Casting, Coating & Encapsulation, EMI / RFI Shielding, Cold Solder Replacement
- Composition: Filled
- Chemical System: Epoxy
- Cure / Technology: Thermoset; Two Component
from Graphene Laboratories, Inc.
DESCRIPTION: G6E-RTSG ™ epoxy is developed primarily for applications that require curing at room temperature. Room temperature curing eliminates the necessity for a heating oven. This allows easier and safer bond/connection of conductive components or materials. G6E-RTSG ™ epoxy is also... [See More]
- Industry: Aerospace; Automotive; Electronics; Electric Power; Military; OEM or Industrial; PCB Manufacture/Repair, Photovoltaic Cell Packaging, Temperature Sensitive Electronics Bonding, Display Packaging/Bonding
- Composition: Filled
- Chemical System: Epoxy
- Cure / Technology: Thermoset; Two Component
from Graphene Laboratories, Inc.
DESCRIPTION: G6E-SG ™ epoxy is developed for general purpose applications requiring high-performance bond or connection of electrically conductive components/materials that require low electrical resistivity. G6E-SG ™ is formulated with proprietary nanomaterials and fillers. G6E-SG... [See More]
- Industry: Aerospace; Automotive; Electronics; Electric Power; Military; OEM or Industrial; Photovoltaic (Solar) Cells, Casting, Coating & Encapsulation, EMI / RFI Shielding, Solder Replacement, Display Packaging / Bonding
- Composition: Filled
- Chemical System: Epoxy
- Cure / Technology: Thermoset; Two Component
from Graphene Laboratories, Inc.
Our G6E-TSAL ™ Epoxy has been specifically developed for general purpose applications that necessitate the bonding or connecting of thermally conductive components/materials. It is designed to provide efficient heat transfer between components or surfaces, while also providing the bonding and... [See More]
- Industry: Aerospace; Automotive; Electronics; Electric Power; Sanitary; Thermal Interface Materials (TIMs), Solar panels
- Composition: Filled
- Chemical System: Epoxy
- Cure / Technology: Two Component ; Room Temperature Vulcanizing or Curing