Acrylic / Polyacrylate Industrial Adhesives
from RS Components, Ltd.
Loctite(R) multi-bond 330 adhesive kit [See More]
- Chemical System: Acrylic
- Industry: Structural bonding
- Type / Form: Liquid
from Ellsworth Adhesives
3M Scotch-Weld A3-2 Gray is an acrylic adhesive accelerator used to mix 5 and 55 gal DP8600 series, DP8700 series, and DP8910NS products. Available in flexible, low odor, and nylon bonding options with excellent peel, shear, and impact performance. Part A, 1 gal Pail. [See More]
- Chemical System: Acrylic
- Viscosity: 20000
- Cure / Technology: Two Component
from Hernon Manufacturing, Inc.
Fusionbond ® 375 is a highly thixotropic, two component, room temperature curing, 1:1 ratio, methacrylate adhesive system. Fusionbond ® 375 is formulated to provide fixturing strength within 7 to 10 minutes. This adhesive product forms resilient bonds and maintains its strength over a wide... [See More]
- Chemical System: Vinyl; Acrylic
- Substrate Compatibility: Metal; Plastic; PVC, acrylic, ABS, stainless steel, and some types of fiberglass
- Cure / Technology: Two Component
- Industry: Aerospace; Automotive; Electronics; Electric Power; Military; OEM or Industrial
from RS Components, Ltd.
Araldite 2021-1 multi-purpose adhesive [See More]
- Chemical System: Methacrylate; Acrylic
- Industry: Multi-purpose
- Type / Form: Liquid
from Ellsworth Adhesives
3M Scotch-Weld A3-2 Gray is an acrylic adhesive accelerator used to mix 5 and 55 gal DP8600 series, DP8700 series, and DP8910NS products. Available in flexible, low odor, and nylon bonding options with excellent peel, shear, and impact performance. Part A, 5 gal Pail. [See More]
- Chemical System: Acrylic
- Viscosity: 20000
- Cure / Technology: Two Component
from Hernon Manufacturing, Inc.
HASA 716 is a single component structural anaerobic adhesive formulated for bonding rigid assemblies at high temperatures. This high strength acrylic adhesive cures when it is confined between mating surfaces. Utilized for bonding magnets in motor assemblies and structural applications, HASA 716... [See More]
- Chemical System: Acrylic
- Industry: Aerospace; Automotive; Electronics; Electric Power; Military; OEM or Industrial
- Cure / Technology: Single Component
from RS Components, Ltd.
Araldite 2021-1 multi-purpose adhesive [See More]
- Chemical System: Methacrylate; Acrylic
- Industry: Multi-purpose
- Type / Form: Liquid
from Ellsworth Adhesives
3M Scotch-Weld Structural Plastic Adhesive DP8005 Black is a two component, room temperature curing, acrylic-based adhesive that is used for bonding low surface energy plastics and replacing plastic welding, screws, and rivets. It is solvent free, requires no primer, and is resistant to humidity,... [See More]
- Chemical System: Acrylic
- Substrate Compatibility: Plastic
- Cure / Technology: Two Component
- Viscosity: 15000 to 55000
from Hernon Manufacturing, Inc.
ReAct ® 727 is a tough acrylic adhesive designed primarily for securing of ceramic permanent magnet segments in motor magnet bonding applications. This adhesive has also found wide acceptance in a variety of structural bonding applications due to its versatile performance capabilities. ReAct... [See More]
- Chemical System: Ceramic; Acrylic
- Industry: Aerospace; Automotive; Electronics; Electric Power; Military; OEM or Industrial
from RS Components, Ltd.
Araldite 2022-1 50ml Adhesive [See More]
- Chemical System: Methacrylate; Acrylic
- Industry: Multi-purpose
- Type / Form: Liquid
from Ellsworth Adhesives
3M Scotch-Weld Structural Plastic Adhesive DP8005 Off-White is a two component, room temperature curing, acrylic based adhesive that is used for bonding low surface energy plastics and replacing plastic welding, screws, and rivets. It is solvent free, requires no primer, and is resistant to... [See More]
- Chemical System: Acrylic
- Substrate Compatibility: Plastic
- Cure / Technology: Two Component
- Viscosity: 17000 to 55000
from Hernon Manufacturing, Inc.
ReAct ® 761 is a tough acrylic adhesive designed primarily for bonding permanent magnets. ReAct ® 761 has also found wide acceptance in a variety of structural bonding applications due to its versatile performance capabilities. ReAct ® 761 provides high tensile strength while... [See More]
- Chemical System: Acrylic
- Industry: Aerospace; Automotive; Electronics; Electric Power; Military; OEM or Industrial
- Cure / Technology: Single Component
from RS Components, Ltd.
Araldite 2022-1 380ml Adhesive [See More]
- Chemical System: Methacrylate; Acrylic
- Industry: Multi-purpose
from Ellsworth Adhesives
3M Scotch-Weld Structural Plastic Adhesive DP8005 Off-White is a two component, room temperature curing, acrylic based adhesive that is used for bonding low surface energy plastics and replacing plastic welding, screws, and rivets. It is solvent free, requires no primer, and is resistant to... [See More]
- Chemical System: Acrylic
- Substrate Compatibility: Plastic
- Cure / Technology: Two Component
- Viscosity: 17000 to 55000
from Hernon Manufacturing, Inc.
ReAct ® 766 is a tough acrylic adhesive designed primarily for bonding permanent magnets. ReAct ® 766 has also found wide acceptance in a variety of structural bonding applications due to its versatile performance capabilities. ReAct ® 766 provides high tensile strength while... [See More]
- Chemical System: Acrylic
- Industry: Aerospace; Automotive; Electronics; Electric Power; Military; OEM or Industrial
- Cure / Technology: Single Component
from RS Components, Ltd.
RS PRO EXTRU-FIX Adhesive [See More]
- Chemical System: Dichloromethane methylene chloride, nitroethane; Acrylic
- Industry: Bonding
- Type / Form: Liquid
from Ellsworth Adhesives
3M Scotch-Weld Structural Plastic Adhesive DP8010 Blue is a two component, room temperature curing, acrylic based adhesive that is used for bonding low surface energy plastics and replacing plastic welding, screws, and rivets. DP8010 Blue is a one step process, solvent free, and is resistant to... [See More]
- Chemical System: Acrylic
- Substrate Compatibility: Plastic
- Cure / Technology: Two Component
- Viscosity: 17000 to 40000
from Hernon Manufacturing, Inc.
ReAct ® 767 is a high performance tough acrylic adhesive designed primarily for securing ceramic permanent magnet segments in motor magnet bonding applications. Used in conjunction with Hernon ® Activator 56/ Activator 47, this structural adhesive is ideal for choke and transformer... [See More]
- Chemical System: Ceramic; Acrylic
- Industry: Aerospace; Automotive; Electronics; Electric Power; Military; OEM or Industrial
from RS Components, Ltd.
RS PRO ANGLOSOL 700 Adhesive [See More]
- Chemical System: Methyl methacrylate methyl 2-methylprop-2-enoate methyl 2-methylpropenoate; Acrylic
- Industry: Bonding
- Type / Form: Liquid
from Ellsworth Adhesives
3M Scotch-Weld Structural Plastic Adhesive DP8010 Blue is a two component, room temperature curing, acrylic based adhesive that is used for bonding low surface energy plastics and replacing plastic welding, screws, and rivets. DP8010 Blue is a one step process, solvent free, and is resistant to... [See More]
- Chemical System: Acrylic
- Substrate Compatibility: Plastic
- Cure / Technology: Two Component
- Viscosity: 17000 to 40000
from Hernon Manufacturing, Inc.
ReAct ® 795 is a tough acrylic adhesive designed primarily for securing of ceramic permanent magnet segments in motor magnet bonding applications. This adhesive has also found wide acceptance in a variety of structural bonding applications due to its versatile performance capabilities. ReAct... [See More]
- Chemical System: Ceramic; Acrylic
- Industry: Aerospace; Automotive; Electronics; Electric Power; Military; OEM or Industrial
- Cure / Technology: Single Component
from RS Components, Ltd.
RS PRO ANGLOSOL 1200 Adhesive [See More]
- Chemical System: 2-phenoxyethanol, dichloromethane methylene chloride, methyl methacrylate methyl 2-methylprop-2-enoate methyl 2-methylpropenoate; Acrylic
- Industry: Bonding
- Type / Form: Liquid
from Ellsworth Adhesives
3M Scotch-Weld DP805 Off-White is a two component, room temperature curing, acrylic structural adhesive. It offers good durability and impact, as well as excellent peel and shear strengths. Ideal for bonding ceramics, wood, metals, and most plastics. 48.5 mL Duo-Pak Cartridge. [See More]
- Chemical System: Acrylic
- Substrate Compatibility: Ceramic, Glass; Metal; Plastic; Wood
- Cure / Technology: Two Component
- Viscosity: 40000 to 150000
from Hernon Manufacturing, Inc.
Supertacker ® 351 is a single component, high performance elastomeric adhesive that exhibits exceptional bonding characteristics to a broad range of materials including metals, glass, plastic composites, rubber, leather, wood and vinyl. Supertacker ® 351 provides a tough, waterproof bond... [See More]
- Chemical System: Vinyl; Elastomeric; Silicone; Acrylic
- Industry: Aerospace; Automotive; Electronics; Electric Power; Military; OEM or Industrial
- Cure / Technology: Single Component
from RS Components, Ltd.
Devweld 530 structural adhesive,50ml [See More]
- Chemical System: Acrylic
- Industry: Bonding
from Ellsworth Adhesives
3M Scotch-Weld Low-Odor Acrylic Adhesive DP810 Tan is a two component, fast bonding, acrylic based resin that is used for bonding wood, plastics, metal, rubber, and ceramics. It offers low odor, little surface preparation, impact resistance, high shear and peel strength. 1:1 mix ratio by volume and... [See More]
- Chemical System: Acrylic
- Substrate Compatibility: Ceramic, Glass; Metal; Plastic; Wood
- Cure / Technology: Two Component
- Viscosity: 18000 to 22000
from Hernon Manufacturing, Inc.
Supertacker ® 353 is a single component, high performance elastomeric adhesive that exhibits exceptional bonding characteristics to a broad range of materials including metals, glass, plastic composites, rubber, leather, wood and vinyl. Supertacker ® 353 provides a tough, waterproof bond... [See More]
- Chemical System: Vinyl; Elastomeric; Silicone; Acrylic
- Industry: Aerospace; Automotive; Electronics; Electric Power; Military; OEM or Industrial
- Cure / Technology: Single Component
from RS Components, Ltd.
ITW Devcon 21500 Adhesive [See More]
- Chemical System: Acrylic
- Industry: Bonding
from Ellsworth Adhesives
3M Scotch-Weld Low-Odor Acrylic Adhesive DP810 is a two component, fast bonding, acrylic based resin that is used for bonding wood, plastics, metal, rubber, and ceramics. It offers low odor, little surface preparation, impact resistance, high shear and peel strength. 1:1 mix ratio by volume and... [See More]
- Chemical System: Acrylic
- Substrate Compatibility: Ceramic, Glass; Metal; Plastic; Wood
- Cure / Technology: Two Component
- Viscosity: 18000 to 22000
from Hernon Manufacturing, Inc.
Supertacker ® 357 is a single component, high performance elastomeric adhesive that exhibits exceptional bonding characteristics to a broad range of materials including metals, glass, plastic composites, rubber, leather, wood and vinyl. Supertacker ® 357 provides a tough, waterproof bond... [See More]
- Chemical System: Vinyl; Elastomeric; Silicone; Acrylic
- Industry: Aerospace; Automotive; Electronics; Electric Power; Military; OEM or Industrial
- Cure / Technology: Single Component
from RS Components, Ltd.
Loctite 350 high strength adhesive,50ml [See More]
- Chemical System: Acrylic
- Industry: Bonding
- Type / Form: Liquid
from Ellsworth Adhesives
3M Scotch-Weld Low-Odor Acrylic Adhesive DP810 NS is a two component, fast bonding, acrylic based resin that is used for bonding wood, plastics, metal, rubber, and ceramics. It offers low odor, non-sag, little surface preparation, 10 minute handling time, high shear and peel strength. 1:1 mix ratio... [See More]
- Chemical System: Acrylic
- Substrate Compatibility: Ceramic, Glass; Metal; Plastic; Wood
- Cure / Technology: Two Component
- Viscosity: 90000 to 100000
from Hernon Manufacturing, Inc.
Hernon ® Fusionbond ® 3751-10 is two-component methacrylate adhesive designed for room-temperature curing with a 1:1 mix ratio. This next-generation formula offers enhanced stability when stored at room temperature. Fusionbond ® 3751-10 achieves fixture strength within 10 minutes and... [See More]
- Chemical System: Vinyl; Acrylic
- Industry: Aerospace; Automotive; Electronics; Electric Power; Military; OEM or Industrial
- Cure / Technology: Two Component ; Room Temperature Vulcanizing or Curing
from RS Components, Ltd.
Unibond 261106 Adhesive [See More]
- Chemical System: Acrylic
- Industry: Bonding
from Ellsworth Adhesives
3M Scotch-Weld Low-Odor Acrylic Adhesive DP810 NS is a two component, fast bonding, acrylic based resin that is used for bonding wood, plastics, metal, rubber, and ceramics. It offers low odor, non-sag, little surface preparation, 10 minute handling time, high shear and peel strength. 1:1 mix ratio... [See More]
- Chemical System: Acrylic
- Substrate Compatibility: Ceramic, Glass; Metal; Plastic; Wood
- Cure / Technology: Two Component
- Viscosity: 90000 to 100000
from Hernon Manufacturing, Inc.
Hernon ® Fusionbond ® 3770-15 is a high-performance, two-component methacrylate adhesive that cures at room temperature with a 1:1 mix ratio. Engineered with advanced technology, this next-generation formula delivers strong, durable bonds while significantly reducing odor. Fusionbond... [See More]
- Chemical System: Acrylic
- Industry: Aerospace; Automotive; Electronics; Electric Power; Military; OEM or Industrial
- Cure / Technology: Two Component
from RS Components, Ltd.
Loctite(R) 326 structural adhesive,50ml [See More]
- Chemical System: Acrylic
- Industry: Bonding
- Type / Form: Liquid
from Ellsworth Adhesives
3M Scotch-Weld DP820 Acrylic Adhesive Off-White is a two component toughened acrylic structural adhesive. It bonds well to many metals, ceramics, wood, and most plastics. 48.5 mL Cartridge. [See More]
- Chemical System: Acrylic
- Substrate Compatibility: Ceramic, Glass; Metal; Plastic; Wood
- Cure / Technology: Two Component
- Viscosity: 45000 to 75000
from Hernon Manufacturing, Inc.
Fusionbond ® 3780-05 is a high-performance, two-component methacrylate adhesive that cures at room temperature with a 1:1 mix ratio. Engineered with advanced technology, this next-generation formula delivers strong, durable bonds while significantly reducing odor for improved user experience. [See More]
- Chemical System: Acrylic
- Industry: Aerospace; Automotive; Electronics; Electric Power; Military; OEM or Industrial
- Cure / Technology: Two Component
from RS Components, Ltd.
Loctite(R) glass bond,3gm tube [See More]
- Chemical System: Acrylic
- Industry: Glass
- Type / Form: Liquid
from Ellsworth Adhesives
3M Scotch-Weld DP8405NS Acrylic Adhesive Green is a two component, heat curing, high performance adhesive that is used for bonding with metals and plastics. It consists of glass beads that provide a controlled bond line thickness. It offers excellent structural, impact, peel, and shear strength. [See More]
- Chemical System: Acrylic
- Substrate Compatibility: Metal; Plastic; Wood
- Cure / Technology: Two Component
- Viscosity: 35000 to 75000
from RS Components, Ltd.
Structural acrylic adhesive DP8805 45ml [See More]
- Chemical System: Acrylic
- Type / Form: Liquid
from Ellsworth Adhesives
3M Scotch-Weld DP8405NS Acrylic Adhesive Green is a two component, heat curing, high performance adhesive that is used for bonding with metals and plastics. It consists of glass beads that provide a controlled bond line thickness. It offers excellent structural, impact, peel, and shear strength. [See More]
- Chemical System: Acrylic
- Substrate Compatibility: Metal; Plastic; Wood
- Cure / Technology: Two Component
- Viscosity: 35000 to 75000
from RS Components, Ltd.
Structural acrylic adhesive DP8810 45ml [See More]
- Chemical System: Acrylic
- Type / Form: Liquid
from Ellsworth Adhesives
3M Scotch-Weld Metal Bonder Acrylic Adhesive DP8407NS Gray is an extra strength, two-part acrylic adhesive that provides outstanding peel, remarkable shear, and robust impact performance. This acrylic adhesive excels in providing adhesion to a wide array of different plastics and metals, even those... [See More]
- Chemical System: Acrylic
- Substrate Compatibility: Metal; Plastic
- Cure / Technology: Two Component
- Viscosity: 15000 to 50000
from RS Components, Ltd.
Structutal acrylic adhesive DP8405 45ml [See More]
- Chemical System: Acrylic
- Type / Form: Liquid
from Ellsworth Adhesives
3M Scotch-Weld Metal Bonder Acrylic Adhesive DP8407NS Gray is a robust two-part acrylic adhesive that brings strong impact performance, excellent peel, and stellar shear. Offered in a 490mL cartridge, this acrylic adhesive exceeds in bringing adhesion to a several different types of metals and... [See More]
- Chemical System: Acrylic
- Substrate Compatibility: Metal; Plastic
- Cure / Technology: Two Component
- Viscosity: 15000 to 50000
from RS Components, Ltd.
High performance acrylic glue [See More]
- Chemical System: Acrylic
- Industry: Bonding
from Ellsworth Adhesives
3M Scotch-Weld DP8410NS Acrylic Adhesive Green is a two component, heat curing, high performance adhesive that is used for bonding with metals and plastics. It consists of glass beads that provide a controlled bond line thickness. It offers excellent structural, impact, peel, and shear strength. [See More]
- Chemical System: Acrylic
- Substrate Compatibility: Metal; Plastic; Wood
- Cure / Technology: Two Component
- Viscosity: 35000 to 75000
from Ellsworth Adhesives
3M Scotch-Weld DP8410NS Acrylic Adhesive Green is a two component, heat curing, high performance adhesive that is used for bonding with metals and plastics. It consists of glass beads that provide a controlled bond line thickness. It offers excellent structural, impact, peel, and shear strength. [See More]
- Chemical System: Acrylic
- Substrate Compatibility: Metal; Plastic; Wood
- Cure / Technology: Two Component
- Viscosity: 35000 to 75000
from Ellsworth Adhesives
3M Scotch-Weld DP8610NS Black is a two component, low odor acrylic structural adhesive with high elongation and excellent peel, shear, and impact performance. The material requires minimal surface preparation and contains ceramic beads to help control bond line thickness. Ideal for bonding glass,... [See More]
- Chemical System: Acrylic
- Viscosity: 90000
- Cure / Technology: Two Component
- Tensile (Break): 215
from Qosina Corp.
Medical adhesives help your team stick to the project plan. Qosina offers a variety of UV-curable and cyanoacrylate instant adhesives from H.B. Fuller that are in stock and ready for immediate delivery. Medical-Grade Partnerships. H.B. Fuller connects innovation with opportunity, and Qosina is proud... [See More]
- Chemical System: Acrylic
- Type / Form: Liquid
- Cure / Technology: UV or Radiation Cured
- Industry: Sanitary
from Electro-Lite Corporation
ELC-4481 optically transparent acrylic with a refractive index of 1.48 is an excellent material for use in fiber optics, lenses tacking and laser applications. Available in 300cps -- 5000cps -- 20,000cps [See More]
- Chemical System: Polyurethane; Acrylic
- Type / Form: Liquid
- Cure / Technology: UV or Radiation Cured
- Substrate Compatibility: Ceramic, Glass; Fiber Optic Cable
from ND Industries, Inc.
Cyanoacrylates (also known as superglues) are single-part clear instant adhesives that rapidly polymerize at room temperature and develop strength extremely fast (fixture 0 to 60 seconds). They are initiated by moisture on the parts surface or by accelerators. Uses: Circuit board wires. Ceramic,... [See More]
- Chemical System: Acrylic
- Type / Form: Liquid
- Cure / Technology: Air Setting / Film Drying; Single Component
- Substrate Compatibility: Ceramic, Glass; Metal; Textiles or Fabrics
from R. S. Hughes Company, Inc.
3M 4298 amber adhesion promoter is compatible with plastic materials. For use with acrylic. [See More]
- Chemical System: Acrylic
- Type / Form: Liquid
from CableOrganizer.com, Inc.
What 's special about this acrylic-based adhesive?. Conveniently hang/mount items or fasten objects together without the damage of nails, tacks, or staples. Superior, heat-resistant bonding for automotive, computer, and medical environments. Pressure-sensitive acrylic adhesive reaches full bond... [See More]
- Chemical System: Acrylic
from LexJet Corporation
FaceMount ™ Permanent Adhesive provides the exceptional clarity and ease of use needed for face-mounting graphics to rigid, clear surfaces including acrylic, Plexiglass, Lexan, polycarbonate or glass. It is a popular choice for mounting backlit images, and can also be used to mount motion- or... [See More]
- Chemical System: Acrylic
- Use Temperature: -20 to 257
- Type / Form: Sheet or Film
from Chemence Inc.
KG155 flexible anaerobic gasket is a purple, gel. It is easily applied and cures to form a tough, flexible, formed-in-place gasket. KG155 provides an instant low pressure seal for most general purpose gasket sealing applications. KG155 is used for fuel and water pumps, split crank cases on engines,... [See More]
- Chemical System: Acrylic
- Type / Form: Gel
- Cure / Technology: Anaerobic; Two Component (optional feature); Single Component
- Features: Sealant
from Cattie Adhesive Solutions
Pressure Sensitive Hot Melts (PSA) are unique because they do not solidify to form a solid material, they remain permanently tacky and have the ability to wet-out substrates on contact. Bonds are formed by bringing the PSA adhesive in contact with the substrate and applying pressure. When inadequate... [See More]
- Chemical System: Acrylic
- Features: Solvent Based; Water Based
- Cure / Technology: Thermoplastic / Hot Melt; Contact or Pressure Sensitive Adhesives
- Substrate Compatibility: Ceramic, Glass; Metal; Paper or Paperboard; Plastic; Rubber or Elastomer; Textiles or Fabrics; Wood
from Acoustical Solutions, Inc.
Acoustical Solutions offers Sure Seal Heavy Duty Double Sided Tape to assist you with the installation of acoustical foam. [See More]
- Chemical System: Acrylic
- Type / Form: Sheet or Film
- Cure / Technology: Single Component
- Features: Flexible
from Hi-Tech Seals, Inc.
Assembly of cylindrical parts, such as rotors, gears, bushings, collars and bearings, can be effectively and reliably accomplished with HERNON ® ’s line of Cylinlock ® Retaining Compounds. Cylinlock ® high strength products eliminate the need for mechanical methods of assembly... [See More]
- Chemical System: Acrylic
- Type / Form: Liquid
- Cure / Technology: Single Component
- Features: Sealant
from ThreeBond International, Inc.
Liquid Gaskets, sometimes called liquid adhesives, seal various types of flanges and pipes with threads. We have a wide selection of grades to help you find the right product to match your application needs. With several different chemistries and reaction grades are available, there is a solution... [See More]
- Chemical System: Acrylic
- Substrate Compatibility: Rubber or Elastomer
- Type / Form: Sheet or Film; Liquid
- Viscosity: 15000
from Henkel Corporation - Industrial
UV-cured modified acrylate acrylic adhesive which has excellent adhesion to glass and metals with typical applications including terminal pin bonding. LOCTITE ® 3189UV is a green, transparent, medium viscosity, UV-cured modified acrylate acrylic adhesive. It only cures when exposed to UV light. [See More]
- Chemical System: Acrylic
- Type / Form: Liquid
- Cure / Technology: UV or Radiation Cured; Single Component
- Viscosity: ? to 8000
from Zippertubing Co. (The)
Transfer adhesive closures are strong, thin, and flexible and offer tooless installations. Adhesives are not intended for applications requiring periodic rework or re-entry. It is possible to peel apart an adhesive closed jacket once installed, but doing so will destroy the closure and possibly the... [See More]
- Chemical System: Acrylic
from Henkel Corporation - Electronics
Loctite ® Liquid Optically Clear Adhesives (LOCAs) for cover lens bonding, touch panel sensor assembly and direct bonding applications in touch panel and display devices including mobile phones, tablets, monitors, televisions and outdoor signage. [See More]
- Chemical System: Acrylic
- Industry: Electronics
- Cure / Technology: UV or Radiation Cured
- Elongation: 100.0
from Titebond
Titebond ® 231 Acrylic Polymer Wood Flooring Adhesive is a VOC-compliant product ideal for the installation of parquet and engineered plank. It offers a strong initial tack, excellent strength development, and provides the installer with the option of using the "wet lay" method or the "flash"... [See More]
- Chemical System: Acrylic
- Viscosity: 100000
from Epoxies Etc...
10-8000 is a high bond strength acrylic adhesive designed for the demanding decorative solid surface market. This unique adhesive was formulated to provide a quick cure to acrylic, polyester, and marble solid surface seams. With 10-8000, fabricated parts may be sanded and finished within 60 minutes. [See More]
- Chemical System: Acrylic
- Substrate Compatibility: Concrete, Masonry; Textiles or Fabrics; Acrylic Surfaces
- Cure / Technology: Single Component; Room Temperature Vulcanizing or Curing
- Industry: OEM or Industrial
from DuPont Electronics & Imaging
DuPont ™ Pyralux ® LF-B is DuPont ™ Kapton ® B black polyimide film coated with acrylic ideal for products where uniform matte black appearance is desired. The coverlay is made with the leading DuPont ™ Kapton ® brand black polyimide film for high performance... [See More]
- Chemical System: Polyimide; Acrylic
- Features: High Dielectric
- Type / Form: Sheet or Film
- Industry: Automotive; Electronics; Military; OEM or Industrial
from Shenzhen DeepMaterial Technologies Co., Ltd
It is suitable for the structural bonding of notebook and tablet computer shells. It has fast curing, short fastening time, super impact resistance and fatigue resistance. It is an all-rounder of metal adhesives. After curing, it has super impact resistance and fatigue resistance, and can withstand... [See More]
- Chemical System: Acrylic
- Cure / Technology: Two Component ; Room Temperature Vulcanizing or Curing
from Techsil Limited
LOCTITE ® AA 358 bonds and seals glass to glass and glass to metal, quite often used in decorative glassware or jewelry applications. This product has a medium viscosity and cures under UV light, it is a one-component part so requires no mixing. For details on the required UV radiation for... [See More]
- Chemical System: Acrylic
- Cure / Technology: UV or Radiation Cured
from Total Plastics, Inc.
Clear. Fast setting, medium bodied, high strength, acrylic cement. Also bonds rigid PVC , ABS, styrene, butyrate, polycarbonate to themselves and each other, as well as other plastics and porous surfaces. Available Sizes. 4 oz. or pint [See More]
- Chemical System: Acrylic
- Substrate Compatibility: Plastic
from ND Industries, Inc.
Vibra-Tite acrylic (methacrylate) adhesives are a room temperature curing, non-sagging, 2-part system comprised of resin and activator. Our adhesives respond well to dissimilar materials and a wide range of temperatures. Forms a bond on: fiberglass, steel, aluminum, stainless steel, composite, ABS,... [See More]
- Chemical System: Acrylic
- Type / Form: Liquid
- Cure / Technology: Single Component
- Substrate Compatibility: Ceramic, Glass; Composites; Metal; Plastic; Wood
from R. S. Hughes Company, Inc.
3M acrylic adhesive. [See More]
- Chemical System: Acrylic
from LexJet Corporation
LexJet FaceMount-X Removable Adhesive is a clear 1-mil polyester with a permanent solvent acrylic adhesive on one side and removable solvent adhesive on the other that is ideal for temporary window applications. The air flow release liner on the removable side provides easy bubble-free installation... [See More]
- Chemical System: Thermoplastic Polyester (PET, PBT, etc.); Acrylic
- Use Temperature: -65 to 225
- Type / Form: Sheet or Film
from Hi-Tech Seals, Inc.
HERNON ® offers a complete line of structural acrylic adhesives. These systems are two-part, no mix, and reactive adhesives. Each acrylic adhesive has two components: the adhesive base or resin, and the Activator. Structural acrylic adhesives are termed “reactive ” cure systems. The... [See More]
- Chemical System: Acrylic
- Features: Thermally Conductive
- Cure / Technology: Two Component ; Reactive or Moisture Cured
- Industry: Electronics
from ThreeBond International, Inc.
Our UV curable resins are materials that are polymerized and cured in a short time by the energy radiated from ultraviolet irradiation devices. We offer our UV curing adhesives in many variations to meet almost any industrial need. Curing is completed in several seconds through UV light irradiation. [See More]
- Chemical System: Elastomeric; Acrylic
- Substrate Compatibility: Rubber or Elastomer
- Cure / Technology: UV or Radiation Cured
- Viscosity: 95000
from Henkel Corporation - Industrial
LOCTITE DSP 3803, Acrylic, Display material, Optical lamination, Single Component, UV Curable Adhesive LOCTITE ® DSP 3803 is a single component UV curable adhesive, specifically designed for PSA lamination process. LOCTITE DSP 3803 is a medium viscosity yet high performance adhesive. It cures... [See More]
- Chemical System: Acrylic
- Type / Form: Liquid
- Cure / Technology: UV or Radiation Cured; Single Component
- Industry: Optical
from Titebond
Titebond Solvent Free I/O Carpet & Tile Adhesive is an acrylic-latex adhesive for the installation of carpet, artificial turf and plastic-backed corded tiles. It offers good initial tack for a quick and easy installation. It also provides a strong bond that is highly water-resistant. Titebond... [See More]
- Chemical System: Elastomeric; Acrylic
- Viscosity: 40000
from Techsil Limited
Panacol Vitralit ® 6128 is a UV / light curing solvent-free acrylic adhesive. This versatile one component material is both a glass adhesive in combination with glass, metals, stone and other hard materials as well as being a potting compound with excellent adhesion to many thermoplastics. VI... [See More]
- Chemical System: Acrylic
- Cure / Technology: UV or Radiation Cured
from Total Plastics, Inc.
Clear. Non-flammable, water-thin, very fast setting, solvent cement for bonding acrylics. Also bonds styrene, butyrate, PETG , and polycarbonate to themselves. Will not bond to cross-linked acrylics. Available Sizes. 4 oz. or pint [See More]
- Chemical System: Acrylic
- Substrate Compatibility: Plastic
- Type / Form: Liquid
from ND Industries, Inc.
Vibra-Tite is one of the world ’s market leaders in anaerobics, cyanoacrylates, epoxies and ultraviolet technologies. Vibra-Tite is quickly becoming one of the most highly respected names in the adhesive industry. And, as a result of ND ’s low overhead expenses and in-house... [See More]
- Chemical System: Acrylic
- Type / Form: Liquid
- Cure / Technology: Two Component ; Reactive or Moisture Cured
- Substrate Compatibility: Ceramic, Glass; Composites; Metal; Plastic; Wood
from R. S. Hughes Company, Inc.
3M AP596 clear primer is compatible with acrylic, glass and polycarbonate materials with a 15 min cure time. Delivers great performance with a shear strength of 361 psi. For use with acrylic. [See More]
- Chemical System: Acrylic
- Type / Form: Liquid
from LexJet Corporation
LexJet GraphicMount Clear Adhesive is a permanent, pressure-sensitive solvent-based acrylic adhesive that has been a real problem-solver for many graphic producers. Not only can this adhesive be used to mount all types of graphics to virtually any substrate, it also can maintain a strong bond for... [See More]
- Chemical System: Acrylic
- Use Temperature: -40 to 257
- Type / Form: Sheet or Film
from Hi-Tech Seals, Inc.
The Nuts N ’ Bolts is an anaerobic adhesive, used in nut and bolt assemblies. When the adhesive is confined between substrates, the oxygen is eliminated and the adhesive cures. These thread locking adhesives offer a wide-range of strengths, viscosities, and temperature ranges for just about... [See More]
- Chemical System: Acrylic
- Type / Form: Liquid
- Cure / Technology: Anaerobic; Single Component
- Features: Sealant; Threadlocker or Retainer
from ThreeBond International, Inc.
Electrically Conductive Resins. These Electrically conductive resin can connect multiple electrical contacts simultaneously and make it possible to create an electrical connection in materials that cannot be soldered. They are electro-conductive resins made up of synthetic resin and a conductive... [See More]
- Chemical System: Acrylic
- Cure / Technology: Anaerobic
- Composition: Filled
- Features: Electrically Conductive
from Henkel Corporation - Industrial
LOCTITE ECCOBOND EN 3707F, Epoxy, Encapsulant LOCTITE ® ECCOBOND EN 3707F no flow encapsulant is designed for local circuit board protection. This adhesive cures in seconds when exposed to the appropriate intensity of UV light. In addition to light cure, this adhesive contains a secondary... [See More]
- Chemical System: Acrylic
- Viscosity: 3480
- Cure / Technology: UV or Radiation Cured
- CTE: 28
from Titebond
Titebond ® UA 920 is a urethane acrylic elastomeric formula that does it all. It has excellent adhesion and flexibility, making it the professional's ideal choice for all interior and exterior construction, home remodeling and repair projects. It is mildew resistant, non-yellowing and reduces... [See More]
- Chemical System: Acrylic
- Viscosity: 550000
from Total Plastics, Inc.
Clear. Non-flammable, water-thin, moderately fast setting, solvent cement for bonding acrylics. Also bonds styrene, butyrate, PETG , and polycarbonate to themselves. Will not bond to cross-linked acrylics. Available Sizes. 4 oz. or pint [See More]
- Chemical System: Acrylic
- Substrate Compatibility: Plastic
- Type / Form: Liquid
from ND Industries, Inc.
Vibra-Tite Structural adhesives are a methacrylate technology, room temperature curing, two part, no mix system comprised of resin and hardener. Structural adhesives work on metal, composites, plastic, wood, ceramic and many other substrates. Since it is a two part system, structurals are ideal for... [See More]
- Chemical System: Acrylic
- Type / Form: Liquid
- Cure / Technology: Two Component ; Reactive or Moisture Cured
- Substrate Compatibility: Ceramic, Glass; Composites; Metal; Plastic; Wood
from R. S. Hughes Company, Inc.
3M 1000NF Fast Tack acrylic adhesive is compatible with fabric, flexible foam, latex, metal, plastic, plywood, polyester and wood materials. Maximum operating temperature is +300 F. Perfect for laminating applications. [See More]
- Chemical System: Acrylic
- Use Temperature: 300
- Viscosity: 400 to 1100
from LexJet Corporation
LexJet GraphicMount White Adhesive is a white film coated on both sides with a permanent, pressure-sensitive solvent-based acrylic adhesive. This adhesive is a good choice for mounting graphics to dark substrates because whiteness of the carrier film keeps the darkness of the substrate from... [See More]
- Chemical System: Acrylic
- Use Temperature: -40 to 257
- Type / Form: Sheet or Film
from Hi-Tech Seals, Inc.
HERNON ® offers a complete line of structural acrylic adhesives. These systems are two-part, no mix, and reactive adhesives. Each acrylic adhesive has two components: the adhesive base or resin, and the Activator. Structural acrylic adhesives are termed “reactive ” cure systems. The... [See More]
- Chemical System: Acrylic
- Type / Form: Liquid
- Cure / Technology: Two Component ; Reactive or Moisture Cured
- Features: Sealant
from ThreeBond International, Inc.
Structural adhesives from ThreeBond are impact-resistant and yield a good bond balance of shear bond strength and peel bond strength. These structural adhesives offer two-component (2K) structural adhesive bonds making them impact-resistant and ideal for applications that require fast hardening and... [See More]
- Chemical System: Acrylic
- Substrate Compatibility: Rubber or Elastomer
- Cure / Technology: Two Component
- Industry: Automotive
from Henkel Corporation - Industrial
LOCTITE ECCOBOND EO 1072, Epoxy, Dam or Fill Encapsulant. LOCTITE ® ECCOBOND EO 1072 has a unique rheology that allows the same product to be used as both a dam and fill encapsulant. It is intended for applications requiring excellent handling properties. High Tg. Low extractable ionics. High... [See More]
- Chemical System: Acrylic
- CTE: 24
from Total Plastics, Inc.
Clear. Two-part, reactive, high strength, acrylic adhesive for bonding and fabricating all acrylics to each other and to polyester, butyrate, PVC , ABS, PETG , polycarbonate, etc. Meets Mil Spec A-8576 Type lll. Available Sizes. 4 oz. and pint [See More]
- Chemical System: Acrylic
- Substrate Compatibility: Plastic
- Cure / Technology: Two Component
from R. S. Hughes Company, Inc.
3M 1000NF neutral one-part Fast Tack acrylic adhesive is compatible with fabric, flexible foam, latex, metal, plastic, plywood, polyester and wood materials. Maximum operating temperature is +300 F. Perfect for laminating applications. [See More]
- Chemical System: Acrylic
- Use Temperature: 300
- Viscosity: 400 to 1100
from Hi-Tech Seals, Inc.
Self Locker thread locking adhesives are pre-applied products designed for production environments. This line features microscopic glass spheres that remain dry until activated by thread engagement. The shearing action of the engagement breaks the spheres releasing the contained anaerobic thread... [See More]
- Chemical System: Acrylic
- Substrate Compatibility: Metal
- Features: Threadlocker or Retainer
- Industry: Automotive; OEM or Industrial
from Henkel Corporation - Industrial
Low viscosity, modified acrylate acrylic adhesive which cures in seconds upon exposure to UV radiation of 365nm to form an impact resistant bond. LOCTITE ® AA 3492 is a transparent, low viscosity, modified acrylate acrylic adhesive liquid which cures in seconds upon exposure to UV radiation of... [See More]
- Chemical System: Acrylic
- Type / Form: Liquid
- Cure / Technology: UV or Radiation Cured; Single Component
from R. S. Hughes Company, Inc.
3M 1000NF neutral one-part Fast Tack acrylic adhesive is compatible with fabric, flexible foam, latex, metal, plastic, plywood, polyester and wood materials. Maximum operating temperature is +300 F. Perfect for laminating applications. [See More]
- Chemical System: Acrylic
- Use Temperature: 300
- Viscosity: 400 to 1100
from Hi-Tech Seals, Inc.
HERNON ® offers a complete line of ultraviolet curing adhesives and compounds, the Ultrabond ® line of products. These products are single component systems offering either ultraviolet light or ultraviolet light & primer initiated curing mechanisms. All Ultrabond ® products cure upon... [See More]
- Chemical System: Acrylic
- Type / Form: Liquid
- Cure / Technology: UV or Radiation Cured; Single Component
- Features: Sealant
from Henkel Corporation - Industrial
Loctite ® Liquid Optically Clear Adhesives (LOCAs) for cover lens bonding, touch panel sensor assembly and direct bonding applications in touch panel and display devices including mobile phones, tablets, monitors, televisions and outdoor signage. [See More]
- Chemical System: Acrylic
- Industry: Optical
- Cure / Technology: UV or Radiation Cured
- Viscosity: 8000
from R. S. Hughes Company, Inc.
3M 1000NF neutral one-part Fast Tack acrylic adhesive is compatible with fabric, flexible foam, latex, metal, plastic, plywood, polyester and wood materials. Maximum operating temperature is +300 F. Perfect for laminating applications. [See More]
- Chemical System: Acrylic
- Use Temperature: 300
- Viscosity: 400 to 1100
from Henkel Corporation - Industrial
Acrylated urethane acrylic structural adhesive primarily designed for bonding rigid and flexible PVC to polycarbonate. LOCTITE ® 3703 is a bone white to beige, translucent, acrylated urethane acrylic structural adhesive primarily designed for bonding rigid and flexible PVC to polycarbonate... [See More]
- Chemical System: Acrylic
- Viscosity: ? to 35000
- Cure / Technology: UV or Radiation Cured; Single Component
from R. S. Hughes Company, Inc.
3M 1000NF off-white Fast Tack acrylic adhesive is compatible with fabric, flexible foam, latex, metal, plastic, plywood, polyester and wood materials. Maximum operating temperature is +300 F. Perfect for laminating applications. [See More]
- Chemical System: Acrylic
- Use Temperature: 300
- Viscosity: 400 to 1100
from Henkel Corporation - Industrial
Surface Preparation - activator. Solvent-based. Low temperature curing. LOCTITE ® SF 7649 is designed to promote the curing speed of LOCTITE anaerobic adhesives and sealants without any significant loss of joint strength. It is especially recommended for applications with passive metals or... [See More]
- Chemical System: Acrylic
- Features: Sealant; Threadlocker or Retainer
- Cure / Technology: Anaerobic
- Industry: Military
from R. S. Hughes Company, Inc.
3M 1000NF purple Fast Tack acrylic adhesive is compatible with fabric, flexible foam, latex, metal, plastic, plywood, polyester and wood materials. Maximum operating temperature is +300 F. Perfect for laminating applications. [See More]
- Chemical System: Acrylic
- Use Temperature: 300
- Viscosity: 400 to 1100
from Henkel Corporation - Industrial
Acrylic activator designed to initiate the cure of LOCTITE toughened acrylic adhesives LOCTITE ® SF A-534R is a red, acrylic activator designed to initiate the cure of LOCTITE toughened acrylic adhesives. This product is safe to use in production environments, as it is non-flammable and... [See More]
- Chemical System: Acrylic
from R. S. Hughes Company, Inc.
3M 1000NF purple one-part Fast Tack acrylic adhesive is compatible with fabric, flexible foam, latex, metal, plastic, plywood, polyester and wood materials. Maximum operating temperature is +300 F. Perfect for laminating applications. [See More]
- Chemical System: Acrylic
- Use Temperature: 300
- Viscosity: 400 to 1100
from Henkel Corporation - Industrial
Thixotropic acrylic methacrylate ester liquid adhesive designed for the bonding of cylindrical fitting parts. LOCTITE ® 6001 is a rose beige to off-white thixotropic acrylic methacrylate ester liquid adhesive designed for the bonding of cylindrical fitting parts. It cures when confined between... [See More]
- Chemical System: Acrylic
- Type / Form: Liquid
- Cure / Technology: Single Component
- Features: Leveling Filling
from R. S. Hughes Company, Inc.
3M 1000NF purple one-part Fast Tack acrylic adhesive is compatible with fabric, flexible foam, latex, metal, plastic, plywood, polyester and wood materials. Maximum operating temperature is +300 F. Perfect for laminating applications. [See More]
- Chemical System: Acrylic
- Use Temperature: 300
- Viscosity: 400 to 1100
from Henkel Corporation - Industrial
Thixotropic, methacrylate ester acrylic thread sealant liquid designed for threaded fittings commonly found in hydraulic and pneumatic systems. LOCTITE ® 5452 is a purple, thixotropic, methacrylate ester acrylic thread sealant liquid designed for threaded fittings commonly found in hydraulic... [See More]
- Chemical System: Acrylic
- Type / Form: Liquid
- Cure / Technology: Anaerobic; Single Component
- Features: Leveling Filling; Sealant
from R. S. Hughes Company, Inc.
3M 1000NF purple one-part Fast Tack acrylic adhesive is compatible with fabric, flexible foam, latex, metal, plastic, plywood, polyester and wood materials. Maximum operating temperature is +300 F. Perfect for laminating applications. [See More]
- Chemical System: Acrylic
- Use Temperature: 300
- Viscosity: 400 to 1100
from Henkel Corporation - Industrial
2-part, high strength, fast-fixturing acrylic methacrylate adhesive gel system designed for bonding low energy plastics without surface pretreatment. LOCTITE ® AA 3035 is a pale yellow, 2-part, high strength, fast-fixturing acrylic methacrylate adhesive gel system designed for bonding low... [See More]
- Chemical System: Acrylic
- Type / Form: Gel
- Cure / Technology: Two Component
- Substrate Compatibility: Ceramic, Glass; Metal; Plastic
from R. S. Hughes Company, Inc.
3M 1000NF purple one-part Fast Tack acrylic adhesive is compatible with fabric, flexible foam, latex, metal, plastic, plywood, polyester and wood materials. Maximum operating temperature is +300 F. Perfect for laminating applications. [See More]
- Chemical System: Acrylic
- Use Temperature: 300
- Viscosity: 400 to 1100
from Henkel Corporation - Industrial
2-part, methacrylate acrylic adhesive liquid designed for structural bonding of magnets in the assembly of fractional horsepower electric motors. LOCTITE ® AA 3060 is a green/blue, 2-part, thixotropic, methacrylate acrylic adhesive liquid designed for structural bonding of magnets in the... [See More]
- Chemical System: Acrylic
- Viscosity: 15000
- Cure / Technology: Two Component
- Gap Fill: 0.0050
from R. S. Hughes Company, Inc.
3M Fastbond 49 clear acrylic adhesive is compatible with fiberglass, metal and paper materials. Delivers great performance with a shear strength of 52 psi and peel strength of 3 piw. Maximum operating temperature is +230 F. Perfect for bonding applications. [See More]
- Chemical System: Acrylic
- Use Temperature: 230
- Viscosity: 450 to 650
from Henkel Corporation - Industrial
Modified acrylic ester adhesive liquid typical applications include bonding dissimilar materials such as metals, glass or ceramics. LOCTITE ® AA 312 is a clear, amber, modified acrylic ester adhesive liquid typical applications include bonding dissimilar materials such as metals, glass or... [See More]
- Chemical System: Acrylic
- Type / Form: Liquid
- Cure / Technology: Single Component
- Substrate Compatibility: Ceramic, Glass; Metal
from R. S. Hughes Company, Inc.
3M Fastbond 49 clear acrylic adhesive is compatible with fiberglass, metal and paper materials. Delivers great performance with a shear strength of 52 psi and peel strength of 3 piw. Maximum operating temperature is +230 F. Perfect for bonding applications. [See More]
- Chemical System: Acrylic
- Use Temperature: 230
- Viscosity: 450 to 650
from Henkel Corporation - Industrial
Toughened, modified acrylic adhesive paste with medium viscosity. This adhesive is designed for bonding metal substrates. LOCTITE ® AA 331 is a light yellow to sand yellow, toughened, modified acrylic adhesive paste with medium viscosity. This adhesive is designed for bonding metal substrates... [See More]
- Chemical System: Acrylic
- Viscosity: 20000
- Cure / Technology: Single Component
- Gap Fill: 0.0400
from R. S. Hughes Company, Inc.
3M Fastbond 49 clear acrylic adhesive is compatible with fiberglass, metal and paper materials. Delivers great performance with a shear strength of 52 psi and peel strength of 3 piw. Maximum operating temperature is +230 F. Perfect for bonding applications. [See More]
- Chemical System: Acrylic
- Use Temperature: 230
- Viscosity: 450 to 650
from Henkel Corporation - Industrial
Thixotropic, modified acrylic structural adhesive liquid designed primarily for securing permanent magnets in motor magnet bonding applications LOCTITE ® AA 332 is a light yellow to dark amber, opaque, thixotropic, modified acrylic structural adhesive liquid designed primarily for securing... [See More]
- Chemical System: Acrylic
- Viscosity: 100000
- Cure / Technology: Single Component
from R. S. Hughes Company, Inc.
3M Scotch-Weld 8405NS green acrylic adhesive is compatible with glass, ceramic, metal, plastic and wood materials with a 24 hr cure time. Provides a 4-6 minutes @ 72 F (22 C) working time. Works in a mix ratio of 10:1. Delivers great performance with a shear strength of 4100 and peel strength of 50. [See More]
- Chemical System: Acrylic
from Henkel Corporation - Industrial
Low viscosity, modified acrylate acrylic adhesive which cures in seconds upon exposure to UV radiation of 365nm to form an impact resistant bond. LOCTITE ® AA 3493 (known as LOCTITE AA 3492) is a transparent, low viscosity, modified acrylate acrylic adhesive liquid which cures in seconds upon... [See More]
- Chemical System: Acrylic
- Type / Form: Liquid
- Cure / Technology: UV or Radiation Cured; Single Component
from R. S. Hughes Company, Inc.
3M Scotch-Weld 8405NS green acrylic adhesive is compatible with glass, ceramic, metal, plastic and wood materials with a 24 hr cure time. Provides a 4-6 minutes @ 72 F (22 C) working time. Works in a mix ratio of 10:1. Delivers great performance with a shear strength of 4100 and peel strength of 50. [See More]
- Chemical System: Acrylic
from Henkel Corporation - Industrial
Modified acrylic structural adhesive liquid which may be used where very fast assembly is required. LOCTITE ® AA 392 is a beige to dark amber, translucent, modified acrylic structural adhesive liquid which may be used for applications which require very fast assembly. It is particularly suited... [See More]
- Chemical System: Acrylic
- Viscosity: 6500
- Cure / Technology: Single Component
- Gap Fill: 0.0250
from R. S. Hughes Company, Inc.
3M Scotch-Weld 8410NS brown acrylic adhesive is compatible with glass, ceramic, metal, plastic and wood materials. Provides a 10-12 minutes @ 72 F (22 C) working time. Works in a mix ratio of 10:1. Perfect for bonding applications. [See More]
- Chemical System: Acrylic
from Henkel Corporation - Industrial
2-part, toughened, thixotropic acrylic adhesive. It is non-flammable, 100% solids and has lower odor compared to other acrylic adhesives. LOCTITE ® AA A-671 is a dark green, 2-part, toughened, thixotropic acrylic adhesive. It is non-flammable, 100% solids and has lower odor compared to other... [See More]
- Chemical System: Acrylic
- Viscosity: 30000
- Cure / Technology: Two Component
- Gap Fill: 0.1000
from R. S. Hughes Company, Inc.
3M Scotch-Weld 8410NS green acrylic adhesive is compatible with glass, ceramic, metal, plastic and wood materials. Provides a 10-12 minutes @ 72 F (22 C) working time. Works in a mix ratio of 10:1. Perfect for bonding applications. [See More]
- Chemical System: Acrylic
from Henkel Corporation - Industrial
2-part, non-sag, room temperature curing methacrylate acrylic adhesive system. LOCTITE ® AA H8000 is a green, 2-part, non-sag, room temperature curing methacrylate acrylic adhesive system. It has a fast fixture time and excellent bond strength on multiple substrates including metals, plastics... [See More]
- Chemical System: Acrylic
- Substrate Compatibility: Ceramic, Glass; Metal; Plastic
- Cure / Technology: Two Component
- Viscosity: 190000