Silicone Industrial Adhesives
from CHT USA Inc.
CHT's AS1821 is is a non-corrosive, neutral cure, 1-part, RTV (Room Temperature Vulcanising) silicone adhesive sealant. It is one in a range of Acetone cure products which are solvent free. It exhibits excellent primerless adhesion to many substrates and cures rapidly at room temperature when in... [See More]
- Chemical System: Silicone
- Features: Sealant
- Cure / Technology: Single Component; Acetone
- Industry: Automotive; Electronics
from Dongguan Sheen Electronic Technology Co., Ltd.
Designed as battery pack thermal runaway protection(thermal propagation) material, SF-C is a fiberglass or PET carrier ceramifiable (ceramifying) silicone rubber composite sheet. Like ordinary rubber, silicone rubber and thermoplastic elastomer, it has not only good insulation and elasticity, but... [See More]
- Chemical System: Elastomeric; Silicone
- Industry: Electronics
- Type / Form: Sheet or Film
from Ellsworth Adhesives
3M Super Silicone Sealant Clear 1/10 Gallon Cartridge is a one component, paste-like adhesive/sealant that adheres to clean metal, glass, wood, ceramic, natural and synthetic fiber, painted surfaces, and many plastics. 0.1 gal Cartridge. [See More]
- Chemical System: Silicone
- Features: Sealant
- Cure / Technology: Single Component
- Substrate Compatibility: Textiles or Fabrics
from Hernon Manufacturing, Inc.
Silastomer ® 333 is a high performance, single component, ready to use adhesive / sealant. It has a paste-like consistency, which cures to a tough, resilient and durable silicone rubber when exposed to moisture in the air. Since it will not flow of its own weight, Silastomer ® 333 can be... [See More]
- Chemical System: Elastomeric; Ceramic; Silicone
- Industry: Aerospace; Automotive; Electronics; Electric Power; Military; OEM or Industrial
- Cure / Technology: Single Component
from Master Bond, Inc.
MasterSil 157 is a two part system for potting, encapsulation and sealing applications. This optically clear formulation features a low index of refraction and excellent light transmittance. Highly flexible, it is capable of withstanding the most rigorous thermal cycling and mechanical shock. These... [See More]
- Chemical System: Silicone
- Cure / Technology: Thermoset; Two Component ; Room Temperature Vulcanizing or Curing; Addition Cure
- Composition: Unfilled
- Type / Form: Liquid
from DigiKey
SI5084 NUVA-SIL 300ML CQ/BN [See More]
- Chemical System: Silicone
- Features: Non-corrosive
from Dexmet® Corporation, a part of PPG’s engineered materials division
Cuming Microwave currently offers a limited line of adhesives for bonding applications. The product line includes an epoxy and a silicone-based system. Pressure sensitive adhesives are available as options with our elastomeric and foam absorbers. For other adhesive recommendations, please contact... [See More]
- Chemical System: Epoxy; Silicone
- Cure / Technology: Two Component
from CHT USA Inc.
AS5702 is a non-corrosive, neutral cure, 1-part, RTV (Room Temperature Vulcanising) silicone adhesive sealant. It is one in a range of Alkoxy cure products which are solvent free. It exhibits excellent primerless adhesion to many substrates and cures at room temperature when in contact with... [See More]
- Chemical System: Silicone
- Features: Sealant
- Cure / Technology: Single Component; Alkoxy
- Industry: Automotive; Electronics
from Dongguan Sheen Electronic Technology Co., Ltd.
The SHEEN's SE Series two-component Thermal Gel are renowned for their distinctive characteristics, which include: ◆ Good thermal conductivity, available in options ranging from 2.0 to 8.0 W/m ·K. ◆ Soft and elastic after curing, maintaining the required thickness and providing... [See More]
- Chemical System: Silicone
- Features: Thermally Conductive
- Type / Form: Gel
- Industry: Electronics
from Ellsworth Adhesives
Bergquist Liqui-Bond SA 2000 is a one component, thermally conductive silicone adhesive that is used for structural bonding applications that are exposed to extreme environments. It cures at elevated temperatures and has excellent mechanical and chemical stability. 600 cc Cartridge. [See More]
- Chemical System: Silicone
- Features: Thermally Conductive
- Cure / Technology: Single Component
- Viscosity: 200000
from Hernon Manufacturing, Inc.
Silastomer ® 334 is a high performance, single component, ready to use adhesive / sealant. It has a paste-like consistency, which cures to a tough, resilient and durable silicone rubber when exposed to moisture in the air. Since it will not flow of its own weight, Silastomer ® 334 can be... [See More]
- Chemical System: Elastomeric; Ceramic; Silicone
- Industry: Aerospace; Automotive; Electronics; Electric Power; Military; OEM or Industrial
- Cure / Technology: Single Component
from Master Bond, Inc.
MasterSil 973S-LO is a two component, silver filled silicone with superb electrical and thermal conductivity. Its exceptionally low volume resistivity allows it to be used for many different applications involving bonding, sealing and coating. It is a paste like system with minimal flow. Its... [See More]
- Chemical System: Silicone
- Cure / Technology: Thermoset; Two Component ; Addition Cure
- Composition: Filled
- Features: Flexible; Electrically Conductive; Encapsulant, Potting Compound; Leveling Filling; Non-corrosive; Phase Change; Sealant; Thermally Conductive
from DigiKey
SI 5145 RTV SILICONE 300ML CQ/BN [See More]
- Chemical System: Silicone
- Features: Non-corrosive
from CHT USA Inc.
CHT ’s AS1803 is a white, non-corrosive, neutral cure 1-part RTV silicone adhesive sealant. This product will not corrode copper or its alloys and is designed for use with electronic components. It is part of CHT's range of Acetone cure products which are all solvent free. It features a fast... [See More]
- Chemical System: Silicone
- Features: Flame Retardant; UL Rating
- Cure / Technology: Single Component; Acetone
- Industry: Automotive; Electronics
from Dongguan Sheen Electronic Technology Co., Ltd.
The SHEEN's TIV800 Series RTV Thermal Conductive Adhesive are renowned for their distinctive characteristics, which include: ◆ Good thermal conductivity, available in options ranging from 1.0 to 2.0 W/m ·K. ◆ High bonding performance. ◆ Good stability, long-term high... [See More]
- Chemical System: Silicone
- Industry: Electronics
- Features: Thermally Conductive
- Use Temperature: -58 to 392
from Ellsworth Adhesives
Bostik Chem-Calk 1200 Clear is a one component, moisture curing, silicone sealant that is used for bonding nonporous materials, aluminum, glass, plastics, and ceramics. It is typically used for sealing doors, windows, skylights, and other building components. 10.1 oz Cartridge. [See More]
- Chemical System: Silicone
- Features: Leveling Filling; Sealant
- Cure / Technology: Single Component
- Substrate Compatibility: Ceramic, Glass
from Hernon Manufacturing, Inc.
Silastomer ® 336 is a high performance, single component, acetoxy, ready to use silicone. It has a paste-like consistency, which cures to a tough, resilient and durable silicone rubber when exposed to moisture in the air. Since it will not flow of its own weight, Silastomer ® 336 can be... [See More]
- Chemical System: Elastomeric; Ceramic; Silicone
- Industry: Aerospace; Automotive; Electronics; Electric Power; Military; OEM or Industrial
- Cure / Technology: Single Component
from Master Bond, Inc.
MasterSil 170 Gel is an addition cured, two component, low viscosity silicone material for specialty potting and encapsulation. [See More]
- Chemical System: Silicone
- Cure / Technology: Thermoset; Two Component ; Room Temperature Vulcanizing or Curing
- Composition: Unfilled
- Type / Form: Liquid
from DigiKey
LOCTITE NC RTV SIL CL 80ML [See More]
- Chemical System: Silicone
- Features: Non-corrosive
from CHT USA Inc.
CHT's AS1707 is a 1-part, alkoxy cured, thermally conductive, low volatile, RTV silicone adhesive paste. AS1707 is formulated to meet the requirements for use as a space grade adhesive. AS1707 has low thermal outgassing properties and a wide operational temperature range. In addition to meeting... [See More]
- Chemical System: Silicone
- Features: Flame Retardant; Thermally Conductive; UL Rating
- Cure / Technology: Single Component; Alkoxy
- Industry: Automotive; Electronics
from Dongguan Sheen Electronic Technology Co., Ltd.
The SHEEN's SC Series Thermal Films are renowned for their distinctive characteristics, which include: ◆ Good thermal conductivity, with options ranging from 0.8 to 5.0 W/m ·K. ◆ Optional fiberglass or polyimide film can be used as the reinforcement carrier. ◆ High mechanical... [See More]
- Chemical System: Silicone
- Industry: Electronics
- Features: Thermally Conductive
- Use Temperature: -58 to 392
from Ellsworth Adhesives
Cemedine Super ‑X 8008 Silicone Polymer Adhesive Clear delivers a powerful, fast ‑curing bond designed for demanding applications. This advanced one ‑part adhesive stands out for its unique combination of pressure ‑sensitive adhesion, long ‑lasting elastic bonding, and... [See More]
- Chemical System: Silicone
- Features: Sealant
- Cure / Technology: Single Component
- Viscosity: 83
from Hernon Manufacturing, Inc.
Silastomer ® 343 is a black, high performance, single component, ready to use adhesive / sealant. It has a paste-like consistency, which cures to a tough, resilient and durable silicone rubber when exposed to moisture in the air. Designed to provide excellent oil resistance and can be used as a... [See More]
- Chemical System: Elastomeric; Ceramic; Silicone
- Industry: Aerospace; Automotive; Electronics; Electric Power; Military; OEM or Industrial
- Cure / Technology: Single Component
from Master Bond, Inc.
Passing both USP Class VI testing and ISO cytotoxicity specifications, MasterSil 910Med is formulated for bonding, sealing, coating in medical device applications. As an acetoxy type system, it bonds exceptionally well to a wide variety of substrates including metals, composites, ceramics, glass as... [See More]
- Chemical System: Silicone
- Cure / Technology: Thermoset; Single Component
- Composition: Unfilled
- Features: Flexible; High Dielectric; Encapsulant, Potting Compound; Sealant; Thermal Insulation
from DigiKey
LOCTITE NC RTV SIL CL 300ML [See More]
- Chemical System: Silicone
- Features: Non-corrosive
from Dongguan Sheen Electronic Technology Co., Ltd.
The SHEEN's SC Series Thermal Films are renowned for their distinctive characteristics, which include: ◆ Good thermal conductivity, with options ranging from 0.8 to 5.0 W/m ·K. ◆ Optional fiberglass or polyimide film can be used as the reinforcement carrier. ◆ High mechanical... [See More]
- Chemical System: Silicone
- Industry: Electronics
- Features: Thermally Conductive
- Use Temperature: -58 to 392
from Ellsworth Adhesives
Cemedine Super-X 8008 Silicone Polymer Adhesive Black delivers a high ‑performance bonding solution designed for demanding applications. This advanced one ‑part adhesive cures quickly and is engineered with three exceptional qualities that make it stand out in modern adhesive technology:... [See More]
- Chemical System: Silicone
- Features: Sealant
- Cure / Technology: Single Component
- Viscosity: 85
from Hernon Manufacturing, Inc.
Supertacker ® 351 is a single component, high performance elastomeric adhesive that exhibits exceptional bonding characteristics to a broad range of materials including metals, glass, plastic composites, rubber, leather, wood and vinyl. Supertacker ® 351 provides a tough, waterproof bond... [See More]
- Chemical System: Vinyl; Elastomeric; Silicone; Acrylic
- Industry: Aerospace; Automotive; Electronics; Electric Power; Military; OEM or Industrial
- Cure / Technology: Single Component
from Master Bond, Inc.
Master Bond MasterSil 323 is a two component, addition cured system for bonding, sealing and potting applications. [See More]
- Chemical System: Silicone
- Features: Flexible; High Dielectric; Encapsulant, Potting Compound; Non-corrosive; Sealant
- Cure / Technology: Thermoset; Two Component ; Room Temperature Vulcanizing or Curing
- Substrate Compatibility: Ceramic, Glass; Composites; Metal; Plastic; Porous Surfaces; Rubber or Elastomer; Dissimilar Substrates
from DigiKey
FIRE BARRIER WATER TIGHT SEALANT [See More]
- Chemical System: Silicone
- Features: Flame Retardant
from Dongguan Sheen Electronic Technology Co., Ltd.
The SHEEN's AF Series Silicone-free Thermal Pads (Non-silicone Thermal Pads) are renowned for their distinctive characteristics, which include: ◆ Good thermal conductivity, with options ranging from 1.0 to 8.0 W/m ·K. ◆ Available in various thicknesses from 0.5 to 5.0 mm. ◆... [See More]
- Chemical System: Silicone
- Industry: Electronics
- Features: Thermally Conductive
- Use Temperature: -40 to 248
from Ellsworth Adhesives
Dow 96-083 Silicone Adhesive Clear is a two component, heat curing adhesive that is used for repairs and bonding a variety of materials such as glass, metals, plastics, and ceramics. It offers high tensile strength, flowability, low viscosity, self-leveling, and contains no added solvents. 10:1 mix... [See More]
- Chemical System: Silicone
- Substrate Compatibility: Ceramic, Glass; Plastic
- Cure / Technology: Two Component
- Viscosity: 275 to 10600
from Hernon Manufacturing, Inc.
Supertacker ® 353 is a single component, high performance elastomeric adhesive that exhibits exceptional bonding characteristics to a broad range of materials including metals, glass, plastic composites, rubber, leather, wood and vinyl. Supertacker ® 353 provides a tough, waterproof bond... [See More]
- Chemical System: Vinyl; Elastomeric; Silicone; Acrylic
- Industry: Aerospace; Automotive; Electronics; Electric Power; Military; OEM or Industrial
- Cure / Technology: Single Component
from Master Bond, Inc.
MasterSil 930 is an acetoxy type fluorosilicone for bonding, sealing and coating. Its most prominent feature is excellent chemical resistance, particularly to fuels, oils and solvents when compared to more standard silicones. Some of the chemicals that this product can withstand better than... [See More]
- Chemical System: Silicone
- Cure / Technology: Thermoset; Single Component
- Composition: Unfilled
- Features: Flexible; Non-corrosive; Sealant; Thermal Insulation
from DigiKey
SUGRU (3 PACK) [See More]
- Chemical System: Silicone
from Dongguan Sheen Electronic Technology Co., Ltd.
The SHEEN's SE Series one-component Thermal Gel are renowned for their distinctive characteristics, which include: ◆ Good thermal conductivity, available in options ranging from 2.0 to 10.0 W/m ·K. ◆ High softness and compressibility, providing low assembly stress, ideal for... [See More]
- Chemical System: Silicone
- Features: Thermally Conductive
- Type / Form: Gel
- Industry: Electronics
from Ellsworth Adhesives
Dow DOWSIL ™ 3-1944 RTV Coating Clear is a one component, solvent free conformal coating that is used for protection, encapsulation, and bonding of common materials in the electronics industry. It flowable, self leveling, flame resistant, and cures at room temperature. 18.1 kg Pail. [See More]
- Chemical System: Silicone
- Viscosity: 63775
- Cure / Technology: Single Component
- Dielectric Strength: 525
from Hernon Manufacturing, Inc.
Supertacker ® 357 is a single component, high performance elastomeric adhesive that exhibits exceptional bonding characteristics to a broad range of materials including metals, glass, plastic composites, rubber, leather, wood and vinyl. Supertacker ® 357 provides a tough, waterproof bond... [See More]
- Chemical System: Vinyl; Elastomeric; Silicone; Acrylic
- Industry: Aerospace; Automotive; Electronics; Electric Power; Military; OEM or Industrial
- Cure / Technology: Single Component
from Master Bond, Inc.
MasterSil 151TC is a highly flexible, temperature resistant two component silicone adhesive offering low thermal resistance and outstanding thermal conductivity. It was developed to improve thermal management for electronic assemblies in bonding and gap filling applications. [See More]
- Chemical System: Silicone
- Cure / Technology: Thermoset; Two Component ; Room Temperature Vulcanizing or Curing
- Composition: Filled
- Type / Form: Liquid
from DigiKey
SUGRU (8 PACK) [See More]
- Chemical System: Silicone
from Dongguan Sheen Electronic Technology Co., Ltd.
The SHEEN's SE Series one-component Thermal Gel are renowned for their distinctive characteristics, which include: ◆ Good thermal conductivity, available in options ranging from 2.0 to 10.0 W/m ·K. ◆ High softness and compressibility, providing low assembly stress, ideal for... [See More]
- Chemical System: Silicone
- Features: Thermally Conductive
- Type / Form: Gel
- Industry: Electronics
from Ellsworth Adhesives
Dow DOWSIL ™ 3-6265 Thixotropic Adhesive Black is a one component, heat curing silicone that is used for attaching, sealing, and gasketing a variety of reactive materials such as glass, metal, ceramics, plastics, and laminates. It is typically used for engine controllers, transmissions,... [See More]
- Chemical System: Silicone
- Features: Sealant
- Cure / Technology: Single Component
- Viscosity: 877600
from Hernon Manufacturing, Inc.
Hernon Dissipator 746D is a thermally conductive adhesive formulated for bonding electrical components to heat sinks or printed circuit boards. Fast room temperature cure combined with excellent heat dissipation for thermally sensitive components and controlled strength for service repair provide... [See More]
- Chemical System: Silicone
- Features: Thermally Conductive
- Cure / Technology: Room Temperature Vulcanizing or Curing
- Industry: Aerospace; Automotive; Electronics; Electric Power; Military; OEM or Industrial
from Master Bond, Inc.
MasterSil 920-LO is an ideal material for the encapsulation of sensitive electronic and optical components, especially when low stress is a critical requirement. This neutral curing, non-corrosive, RTV silicone has very good flow properties and outstanding electrical insulation values, which enhance... [See More]
- Chemical System: Silicone
- Cure / Technology: Thermoset; Single Component; Room Temperature Vulcanizing or Curing
- Composition: Unfilled
- Type / Form: Liquid
from DigiKey
MAKE EVERYTHING MAGNETIC-SUGRU [See More]
- Chemical System: Silicone
from Dongguan Sheen Electronic Technology Co., Ltd.
The SHEEN's AF Series Silicone-free Thermal Pads (Non-silicone Thermal Pads) are renowned for their distinctive characteristics, which include: ◆ Good thermal conductivity, with options ranging from 1.0 to 8.0 W/m ·K. ◆ Available in various thicknesses from 0.5 to 5.0 mm. ◆... [See More]
- Chemical System: Silicone
- Industry: Electronics
- Features: Thermally Conductive
- Use Temperature: -40 to 248
from Ellsworth Adhesives
Dow DOWSIL ™ 3-6265 Thixotropic Adhesive Black is a one component, heat curing silicone that is used for attaching, sealing, and gasketing a variety of reactive materials such as glass, metal, ceramics, plastics, and laminates. It is typically used for engine controllers, transmissions,... [See More]
- Chemical System: Silicone
- Features: Sealant
- Cure / Technology: Single Component
- Viscosity: 877600
from Master Bond, Inc.
MasterSil 972TC-LO is capable of transferring heat with a thermal conductivity of 7-9 BTU •in/ft ² •hr • °F [1.01-1.30 W/(m •K)], while retaining superior dielectric properties. It bonds well to a wide variety of substrates, including metals, composites, glass, ceramics... [See More]
- Chemical System: Silicone
- Cure / Technology: Thermoset; Two Component
- Composition: Unfilled
- Type / Form: Liquid
from DigiKey
SELF-LEVELING SILICONE (CLEAR) 2 [See More]
- Chemical System: Silicone
- Features: Non-corrosive
from Dongguan Sheen Electronic Technology Co., Ltd.
The SHEEN's AF Series Silicone-free Thermal Pads (Non-silicone Thermal Pads) are renowned for their distinctive characteristics, which include: ◆ Good thermal conductivity, with options ranging from 1.0 to 8.0 W/m ·K. ◆ Available in various thicknesses from 0.5 to 5.0 mm. ◆... [See More]
- Chemical System: Silicone
- Industry: Electronics
- Features: Thermally Conductive
- Use Temperature: -40 to 257
from Ellsworth Adhesives
Dow DOWSIL ™ 3-6876 Black Adhesive is a one component, heat curing, silicone that is used for attaching, sealing, and gasketing a variety of reactive materials such as glass, metal, ceramics, plastics, and laminates. It is typically used for engine controllers, transmissions, lighting, base... [See More]
- Chemical System: Silicone
- Features: Sealant
- Cure / Technology: Single Component
- Viscosity: 41275
from Master Bond, Inc.
Master Bond MasterSil 705TC is a one component, thermally conductive, electrically isolating silicone for bonding, sealing and coating applications. It features outstanding thermal conductivity and is well suited for applications that require flexibility and high temperature resistance. It cures... [See More]
- Chemical System: Silicone
- Cure / Technology: Thermoset; Single Component; Reactive or Moisture Cured; Room Temperature Vulcanizing or Curing
- Composition: Unfilled
- Features: Flexible; High Dielectric; Non-corrosive; Sealant; Thermally Conductive
from DigiKey
INDUSTRIAL GRADE SELF-LEVELING S [See More]
- Chemical System: Silicone
- Features: Non-corrosive
from Dongguan Sheen Electronic Technology Co., Ltd.
The SHEEN's SC Series Thermal Films are renowned for their distinctive characteristics, which include: ◆ Good thermal conductivity, with options ranging from 0.8 to 5.0 W/m ·K. ◆ Optional fiberglass or polyimide film can be used as the reinforcement carrier. ◆ High mechanical... [See More]
- Chemical System: Silicone
- Industry: Electronics
- Features: Thermally Conductive
from Ellsworth Adhesives
Dow DOWSIL ™ 3-6876 Black Adhesive is a one component, heat curing, silicone that is used for attaching, sealing, and gasketing a variety of reactive materials such as glass, metal, ceramics, plastics, and laminates. It is typically used for engine controllers, transmissions, lighting, base... [See More]
- Chemical System: Silicone
- Features: Sealant
- Cure / Technology: Single Component
- Viscosity: 41275
from Master Bond, Inc.
MasterSil 912Med is a single component silicone with a paste viscosity for bonding, sealing and coating medical devices. This non-corrosive, neutral cure compound complies with USP Class VI and ISO 10993-5 specifications. It resists many kinds of sterilization including gamma and other types of... [See More]
- Chemical System: Silicone
- Cure / Technology: Thermoset; Single Component
- Composition: Unfilled
- Features: Flexible; Non-corrosive; Sealant; Thermal Insulation
from DigiKey
SELF-LEVELING SILICONE (CLEAR) 2 [See More]
- Chemical System: Silicone
- Features: Non-corrosive
from Dongguan Sheen Electronic Technology Co., Ltd.
The SHEEN's AE Series one-component Silicone-free Thermal Gel are renowned for their distinctive characteristics, which include: ◆ Free from siloxane and the risk of silicone oil bleed. ◆ Good thermal conductivity, available in options ranging from 1.0 to 3.0 W/m ·K. ◆... [See More]
- Chemical System: Silicone
- Features: Thermally Conductive
- Type / Form: Gel
- Industry: Electronics
from Ellsworth Adhesives
Dow DOWSIL ™ 3-6876 Gray Adhesive is a one component, heat curing, silicone that is used for attaching, sealing, and gasketing a variety of reactive materials such as glass, metal, ceramics, plastics, and laminates. It is typically used for engine controllers, transmissions, lighting, base... [See More]
- Chemical System: Silicone
- Features: Sealant
- Cure / Technology: Single Component
- Viscosity: 39875
from Master Bond, Inc.
Low viscosity MasterSil 152 is a two component, optically clear silicone system that cures when exposed to air at room temperature. It has outstanding electrical insulation properties, making it ideal for potting and encapsulation applications. Additionally it features a long working life and has a... [See More]
- Chemical System: Silicone
- Cure / Technology: Thermoset; Two Component ; Reactive or Moisture Cured; Room Temperature Vulcanizing or Curing
- Composition: Unfilled
- Type / Form: Liquid
from DigiKey
ELECTRONICS GRADE SELF-LEVELING [See More]
- Chemical System: Silicone
- Features: Non-corrosive
from Dongguan Sheen Electronic Technology Co., Ltd.
The SHEEN's AF Series Silicone-free Thermal Pads (Non-silicone Thermal Pads) are renowned for their distinctive characteristics, which include: ◆ Good thermal conductivity, with options ranging from 1.0 to 8.0 W/m ·K. ◆ Available in various thicknesses from 0.5 to 5.0 mm. ◆... [See More]
- Chemical System: Silicone
- Industry: Electronics
- Features: Thermally Conductive
- Use Temperature: -40 to 248
from Ellsworth Adhesives
Dow DOWSIL ™ 3145 RTV MIL-A-46146 Adhesive Sealant Clear is a one component, room temperature curing, silicone adhesive that is used for assembling print wire boards and sealing housings, modules, and electrical leads. It is non-flowing and has high elongation, tensile, and tear strength. 19... [See More]
- Chemical System: Silicone
- Features: Sealant
- Cure / Technology: Single Component
- Tensile (Break): 940
from Master Bond, Inc.
Master Bond MasterSil 153AO is an addition cured two part silicone with a high tensile lap shear strength, thermal conductivity and electrical insulation. [See More]
- Chemical System: Silicone
- Type / Form: Liquid
- Cure / Technology: Thermoset; Two Component ; Room Temperature Vulcanizing or Curing
- Features: Flexible; High Dielectric; Non-corrosive; Sealant; Thermally Conductive
from DigiKey
HIGH PERFORMANCE SILICONE 100% R [See More]
- Chemical System: Silicone
from Dongguan Sheen Electronic Technology Co., Ltd.
The SHEEN's AF Series Silicone-free Thermal Pads (Non-silicone Thermal Pads) are renowned for their distinctive characteristics, which include: ◆ Good thermal conductivity, with options ranging from 1.0 to 8.0 W/m ·K. ◆ Available in various thicknesses from 0.5 to 5.0 mm. ◆... [See More]
- Chemical System: Silicone
- Industry: Electronics
- Features: Thermally Conductive
- Use Temperature: -40 to 257
from Ellsworth Adhesives
Dow DOWSIL ™ 3145 RTV MIL-A-46146 Adhesive Sealant Clear is a one component, room temperature curing, silicone adhesive that is used for assembling print wire boards and sealing housings, modules, and electrical leads. It is non-flowing and has high elongation, tensile, and tear strength. 305... [See More]
- Chemical System: Silicone
- Features: Sealant
- Cure / Technology: Single Component
- Tensile (Break): 940
from Master Bond, Inc.
Featuring superb electrical insulation properties, MasterSil 156 is a two component, moderate viscosity silicone system for high performance potting, encapsulation and sealing. It combines high temperature resistance, flexibility, low shrinkage upon cure and thermal conductivity exceeding 8-9 BTU... [See More]
- Chemical System: Silicone
- Cure / Technology: Thermoset; Two Component
- Composition: Unfilled
- Type / Form: Liquid
from DigiKey
HIGH PERFORMANCE SILICONE 100% R [See More]
- Chemical System: Silicone
from Dongguan Sheen Electronic Technology Co., Ltd.
The SHEEN's AF Series Silicone-free Thermal Pads (Non-silicone Thermal Pads) are renowned for their distinctive characteristics, which include: ◆ Good thermal conductivity, with options ranging from 1.0 to 8.0 W/m ·K. ◆ Available in various thicknesses from 0.5 to 5.0 mm. ◆... [See More]
- Chemical System: Silicone
- Industry: Electronics
- Features: Thermally Conductive
- Use Temperature: -40 to 257
from Ellsworth Adhesives
Dow DOWSIL ™ 3145 RTV MIL-A-46146 Adhesive Sealant Clear is a one component, room temperature curing, silicone adhesive that is used for assembling print wire boards and sealing housings, modules, and electrical leads. It is non-flowing and has high elongation, tensile, and tear strength. 90... [See More]
- Chemical System: Silicone
- Features: Sealant
- Cure / Technology: Single Component
- Tensile (Break): 940
from Master Bond, Inc.
MasterSil 323AO-LO is a two component silicone elastomer with a self-priming feature, designed for bonding, sealing and gap filling applications. This electrically insulating and thermally conductive compound meets NASA low outgassing specifications and can be used in the aerospace, electronic,... [See More]
- Chemical System: Silicone
- Cure / Technology: Thermoset; Two Component ; Room Temperature Vulcanizing or Curing
- Composition: Unfilled
- Features: Flexible; High Dielectric; Non-corrosive; Sealant; Thermally Conductive
from DigiKey
FIRE BARRIER WATER TIGHT SEALANT [See More]
- Chemical System: Silicone
- Features: Flame Retardant
from Ellsworth Adhesives
Dow DOWSIL ™ 3145 RTV MIL-A-46146 Adhesive Sealant Gray is a one component, room temperature curing, silicone adhesive that is used for assembling print wire boards, yokes, adding mechanical stability, and sealing housings, modules, and electrical leads. It is non-flowing, adds thermal... [See More]
- Chemical System: Silicone
- Features: Sealant
- Cure / Technology: Single Component
- Tensile (Break): 1035
from Master Bond, Inc.
Master Bond MasterSil 153Med is a two component, paste silicone compound for high performance bonding and sealing. This is an addition cured system and does not require exposure to air for complete cross-linking. With a convenient one to one mix ratio by weight, it will not outgas while curing. [See More]
- Chemical System: Silicone
- Cure / Technology: Thermoset; Two Component ; Room Temperature Vulcanizing or Curing; Addition Cured
- Composition: Unfilled
- Features: Flexible; High Dielectric; Laminaes; Non-corrosive; Sealant; Thermal Insulation
from DigiKey
FIRE BARRIER WATER TIGHT SEALANT [See More]
- Chemical System: Silicone
- Features: Flame Retardant
from Techsil Limited
Momentive CRTV5120 is a high performance, semi-conductive silicone adhesive. This one-part RTV offers fast cure and a resistivity of 200 - 800 ohm-cm. CRTV5120 offers a primer less adhesion to many metals, plastics and glass. This product is ideal for gaskets & seals for electronics that need... [See More]
- Chemical System: Elastomeric; Silicone
- Features: Electrically Conductive
from OMEGA Engineering, Inc.
OMEGATHERM thermal conducting paste is a high temperature and high thermally conductive paste product. They are specially formulated for permanent and temporary bonding of thermocouples, thin film RTDs, thermistors and other temperature sensors, to most surfaces metals, ceramics, glass, plastics,... [See More]
- Chemical System: Silicone
- Features: High Dielectric; Encapsulant, Potting Compound; Thermally Conductive
- Cure / Technology: Air Setting / Film Drying; Single Component
- Substrate Compatibility: Ceramic, Glass; Metal; Paper or Paperboard; Plastic
from ThreeBond International, Inc.
Our UV curable resins are materials that are polymerized and cured in a short time by the energy radiated from ultraviolet irradiation devices. We offer our UV curing adhesives in many variations to meet almost any industrial need. Curing is completed in several seconds through UV light irradiation. [See More]
- Chemical System: Silicone
- Substrate Compatibility: Plastic; Rubber or Elastomer
- Cure / Technology: UV or Radiation Cured; Reactive or Moisture Cured
- Viscosity: 10000
from Shiu Li Technology Co., Ltd
LiPOLY ’s TIM12/TIM14 is a one-part silicon-based thermally conductive adhesive that can be cured at room temperature or high temperature. It not only produces low stress, low thermal resistance, low viscosity, and good adhesion to components, but also maintains insulating properties. It... [See More]
- Chemical System: Silicone
- Type / Form: Gel
- Cure / Technology: Single Component; Room Temperature Vulcanizing or Curing (optional feature); High Heat
- Features: Thermally Conductive
from DME Company
RTV Silicone Adhesive Sealant. Bonds Most Plastics Many Assembly Uses. Cures at Room Temperature To A Tough Flexible Rubber. Resists Shrinkage. Perfect For Caulking, Sealing, Waterproofing & Bonding. Bonds & Seals Terminals, Connectors, Mounting Fixtures, Mechanical Gaskets, Glass, Metal,... [See More]
- Chemical System: Silicone
- Features: Sealant
- Cure / Technology: Room Temperature Vulcanizing or Curing
- Substrate Compatibility: Plastic; Dissimilar Substrates
from Protavic America, Inc.
PNS-56225 ™ is a two-component clear ONE TO ONE MIX RATIO room temperature cure silicone encapsulant. It is designed for clear LED potting, encapsulation by casting of completed circuit boards, hybrid circuits, and power supplies, where flexibility, reparability, and high temperature... [See More]
- Chemical System: Silicone
- Cure / Technology: Thermoset; Two Component
- Composition: Unfilled
- Type / Form: Liquid
from Henkel Corporation - Electronics
Loctite ® Liquid Optically Clear Adhesives (LOCAs) for cover lens bonding, touch panel sensor assembly and direct bonding applications in touch panel and display devices including mobile phones, tablets, monitors, televisions and outdoor signage. [See More]
- Chemical System: Silicone
- Industry: Electronics
- Cure / Technology: UV or Radiation Cured
- Elongation: 100.0
from Hapco, Inc.
Hapsil 360 ™ is a high tear strength, tin-catalyzed RTV-2 silicone rubber, which was designed for casting Hapco's wide variety of rigid and flexible polyurethane resins. Hapsil 360 ™ is not sensitive to inhibition, meaning it will cure at room temperature over virtually any surface. [See More]
- Chemical System: Elastomeric; Silicone
- Cure / Technology: Two Component ; Room Temperature Vulcanizing or Curing
- Composition: Unfilled
- Type / Form: Liquid
from Henkel Corporation - Industrial
BERGQUIST GAP PAD TGP 1350, Highly Conformable, Thermally Conductive, Reworkable Gap Filling Material. BERGQUIST ® GAP PAD TGP 1350 is a highly compliant Gap Pad material that is ideal for fragile component leads. The material includes a PEN film, which facilitates rework and improves puncture... [See More]
- Chemical System: Silicone
- Features: Leveling Filling; Thermally Conductive
from R. S. Hughes Company, Inc.
Loctite 59375 black silicone adhesive sealant with a 24 hr cure time. Minimum to maximum operating temperatures are -65 F to +450 F. [See More]
- Chemical System: Silicone
- Use Temperature: -65 to 450
- Features: Sealant
from ACCRAbond, Inc.
INSTAbond® 1645 line is a methoxycuring (neutral cure) silicone that reacts with atmospheric moisture at room temperature to create a non-corrosive seal. INSTAbond® 1645 is designed for use on sensitive electrical components where typical acetic cure products create problems. INSTAbond® 1645 has... [See More]
- Chemical System: Silicone
- Use Temperature: -49 to 392
- Cure / Technology: Single Component; Room Temperature Vulcanizing or Curing
- Thermal Conductivity: 0.1800
from Wacker Chemical Corp.
The future belongs to adhesives and sealants that offer the combination of strength and elasticity needed for a broad range of challenging applications. To meet the needs of this product class, WACKER has developed innovative hybrid polymers: GENIOSIL® STP-E:The silane-modified polyethers meet all... [See More]
- Chemical System: Silicone
- Type / Form: Liquid
- Cure / Technology: Single Component
- Features: Sealant
from CoorsTek
CoorsTek understands ceramic-to-metal bonding and offers a diverse product portfolio of Durall ™ adhesive products. Our industrial bonding experts will help you select the best adhesive for your specific wear application to ensure long-lasting bonds and reduced downtime for critical material... [See More]
- Chemical System: Ceramic; Silicone
- Type / Form: Gel; Liquid
- Cure / Technology: Room Temperature Vulcanizing or Curing
- Substrate Compatibility: Ceramic, Glass; Metal
from Gelest, Inc.
α-monoVINYL- Ω-monoHYDRIDE TERMINATED POLYDIMETHYLSILOXANE, 1000 cSt [See More]
- Chemical System: Silicone
from Shenzhen DeepMaterial Technologies Co., Ltd
Mainly used in IC chip bonding. The sticking time is extremely short, and there will be no tailing or wire drawing problems. The bonding work can be completed with the smallest dose of adhesive, which greatly saves production costs and waste. It is suitable for automatic adhesive dispensing, has a... [See More]
- Chemical System: Epoxy; Silicone
- Features: Electrically Conductive
- Cure / Technology: Heat curing
- Industry: Semiconductors, IC's
from Chemence Inc.
KSC1202 is a high performance, high viscosity thermally conductive gap filling material. It is formulated to develop a soft, 'form in place' elastomer ideal for coupling hot PC board components to heat sinks. KSC1202 is supplied as a two part, 1:1 mix ratio silicone that when mixed will cure at room... [See More]
- Chemical System: Silicone
- Substrate Compatibility: Plastic
- Cure / Technology: Single Component
- Industry: Electronics
from Henkel Adhesive Technologies - Aviation, Space and Rail
BERGQUIST ® GAP FILLER TGF 3500LVO is a silicone, two-component, high thermal conductivity, liquid gap filler. This product offers the mechanical property benefits of a silicone material with the additional feature of low outgassing. It can be used in industries ranging from automotive to... [See More]
- Chemical System: Silicone
- Type / Form: Liquid
- Cure / Technology: Thermoset
- Features: Thermally Conductive
from Owens Corning® FOAMGLAS® Insulation
A one part acetoxy cure silicone adhesive / sealant formulated for use at high temperatures. It is particularly suited for use in conjunction with insulations which require adhering or sealing to itself or hot surfaces. It cures to an elastomeric solid at room temperatures. VOC Compliant. Meets the... [See More]
- Chemical System: Silicone
- Substrate Compatibility: Metal; Asphalt
- Cure / Technology: Single Component; Acetoxy
- Industry: Insulation Systems
from Aremco Products, Inc.
Hi-temp, low viscosity, easy to use, offered in alternative pigments [See More]
- Chemical System: Silicone
- Cure / Technology: Thermoset
- Composition: Unfilled
- Features: Sealant; Water Based
from Techsil Limited
Momentive CRTV5120 is a high performance, semi-conductive silicone adhesive. This one-part RTV offers fast cure and a resistivity of 200 - 800 ohm-cm. CRTV5120 offers a primerless adhesion to many metals, plastics and glass. This product is ideal for gaskets & seals for electronics that need EMI... [See More]
- Chemical System: Elastomeric; Silicone
- Industry: Electronics
- Features: Electrically Conductive
from OMEGA Engineering, Inc.
OMEGABOND epoxy and OMEGATHERM thermal conducting paste are easy to use epoxies and silicone products. They are specially formulated for permanent bonding of thermocouples, thin film RTDs, thermistors and other temperature sensors, to most surfaces metals, ceramics, glass, plastics, paper products. [See More]
- Chemical System: Silicone
- Features: High Dielectric; Encapsulant, Potting Compound; Thermally Conductive
- Cure / Technology: Air Setting / Film Drying; Single Component
- Use Temperature: 392
from ThreeBond International, Inc.
Electrically Conductive Resins. These Electrically conductive resin can connect multiple electrical contacts simultaneously and make it possible to create an electrical connection in materials that cannot be soldered. They are electro-conductive resins made up of synthetic resin and a conductive... [See More]
- Chemical System: Silicone
- Cure / Technology: Anaerobic
- Composition: Filled
- Features: Electrically Conductive
from Protavic America, Inc.
PTS-46303 A/B ™ is a two-component silicone encapsulant designed for encapsulation by casting of completed circuit boards, hybrid circuits, and power supplies, where flexibility, reparability, thermal conductivity, and high temperature resistance are required. Possible applications include... [See More]
- Chemical System: Silicone
- Cure / Technology: Thermoset; Two Component
- Composition: Filled
- Type / Form: Gel
from Henkel Corporation - Industrial
LOCTITE SI 5421, Silicone, Bonding or Gasketing, Flexible, Formed-in-place, Electrically Conductive Adhesive LOCTITE ® SI 5421 is used for automotive sensor bonding and gasketing of EMI/RF shielded enclosures. It cures to make a flexible, formed-in-place, electrically conductive bond. Room... [See More]
- Chemical System: Silicone
- Thermal Conductivity: 0.8100
- Cure / Technology: Single Component; Room Temperature Vulcanizing or Curing
from R. S. Hughes Company, Inc.
Loctite SI 5049 CL clear silicone adhesive sealant is compatible with glass, ceramic, aluminum, steel and plastics materials with a 24 hr cure time. Minimum to maximum operating temperatures are -30 F to +250 F. Formerly known as Loctite Superflex Speedseal. [See More]
- Chemical System: Silicone
- Use Temperature: -30 to 250
- Features: Sealant
from Wacker Chemical Corp.
Based on the innovative alpha-technology, the new GENIOSIL® XB hybrid polymers for the first time exploit the advantages of silane crosslinking for user-friendly, environmentally compatible structural adhesive bonds.Thanks to their low viscosity, the new hybrid polymers are easy to compound. In... [See More]
- Chemical System: Silicone
- Type / Form: Liquid
- Cure / Technology: Single Component
- Substrate Compatibility: Ceramic, Glass; Metal; Wood
from Gelest, Inc.
α-monoVINYL- Ω-monoHYDRIDE TERMINATED POLYDIMETHYLSILOXANE, 150-250 cSt [See More]
- Chemical System: Silicone
from Henkel Adhesive Technologies - Aviation, Space and Rail
BERGQUIST ® GAP PAD TGP 10000ULM is an extremely soft gap filling material rated at a thermal conductivity of 10.0 W/m-K. It is specially formulated for high performance applications requiring low assembly stress. The material offers exceptional thermal performance at low pressures due to the... [See More]
- Chemical System: Silicone
- Industry: OEM or Industrial
- Features: Thermally Conductive
- Use Temperature: -76 to 392
from Techsil Limited
SilGrip ® PSA529 is a pressure sensitive adhesive from Momentive. It is a very versatile product which is useful in a wide variety of applications, including fastening and bonding if dissimilar materials. Product Benefits. Wide temperature performance range. Maintains good shear and tack... [See More]
- Chemical System: Elastomeric; Silicone
- Cure / Technology: Contact or Pressure Sensitive Adhesives
from Henkel Corporation - Industrial
LOCTITE 596, Silicone, Gasketing & sealing LOCTITE ® 596 cures on exposure to moisture in the air to form a tough, flexible, waterproof, oil-resistant silicone rubber bond. This product resists aging, weathering and thermal cycling without hardening, shrinking or cracking. This product is... [See More]
- Chemical System: Silicone
- Features: Sealant
- Cure / Technology: Single Component; Room Temperature Vulcanizing or Curing
- Viscosity: 73500
from R. S. Hughes Company, Inc.
Loctite SI 5049WH white silicone adhesive sealant is compatible with glass, ceramic, aluminum, steel and plastics materials with a 24 hr cure time. Minimum to maximum operating temperatures are -30 F to +250 F. Formerly known as Loctite Superflex Speedseal. [See More]
- Chemical System: Silicone
- Use Temperature: -30 to 250
- Features: Sealant
from Wacker Chemical Corp.
GENIOSIL® XM 20 is an alpha-silane-terminated polymer and especially targets adhesive applications. Used as a co-binder - in combination with one of the conventional silane-modified polymers (GENIOSIL® STP-E range) - formulations, based on this polymer will give outstanding adhesion to a variety of... [See More]
- Chemical System: Silicone
- Industry: Construction
- Cure / Technology: Single Component
from Gelest, Inc.
α-monoVINYL- Ω-monoHYDRIDE TERMINATED POLYDIMETHYLSILOXANE, 40-60 cSt [See More]
- Chemical System: Silicone
from Henkel Adhesive Technologies - Aviation, Space and Rail
BERGQUIST ® GAP PAD TGP 5000 is a silicone based, thermally conductive, fiberglass reinforced and S-class soft gap pad. Its highly conformable nature and S-class softness ensures that it conforms to demanding contours and maintains structural integrity. Fiberglass reinforcement provides... [See More]
- Chemical System: Silicone
- Industry: OEM or Industrial
- Features: Thermally Conductive
- Use Temperature: -76 to 392
from Techsil Limited
SilGrip ® PSA529 is a pressure sensitive adhesive from Momentive. It is a very versatile product which is useful in a wide variety of applications, including fastening and bonding if dissimilar materials. Product Benefits. Wide temperature performance range. Maintains good shear and tack... [See More]
- Chemical System: Elastomeric; Silicone
- Cure / Technology: Contact or Pressure Sensitive Adhesives
from Henkel Corporation - Industrial
LOCTITE ABLESTIK 12-2, Silicone, General Assembly LOCTITE ® ABLESTIK 12-2 adhesive is the lower viscosity version of ABLETHERM 12-1 adhesive. It is designed for bonding applications which require high thermal conductivity and reworkability. Thermally conductive. Reworkable. Unfilled [See More]
- Chemical System: Silicone
- Features: Thermally Conductive
- Cure / Technology: Single Component
- Substrate Compatibility: Metal
from R. S. Hughes Company, Inc.
Loctite SI 593 BK black adhesive/sealant with a 24 hr cure time. Delivers great performance with tensile strength of 220 psi. Minimum to maximum operating temperatures are -80 F to +450 F. Formerly known as Loctite Superflex Black RTV Silicone. [See More]
- Chemical System: Silicone
- Features: Sealant
- Cure / Technology: Room Temperature Vulcanizing or Curing
- Use Temperature: -80 to 450
from Wacker Chemical Corp.
WACKER ’s silicone adhesives and sealants are based on many years of experience, innovative research and comprehensive technological expertise. In a wide variety of industries, especially in lighting technology, flowable or non-sag silicone products offer decisive advantages in performance and... [See More]
- Chemical System: Elastomeric; Silicone
- Type / Form: Liquid
- Cure / Technology: Thermoset
- Features: Sealant
from Gelest, Inc.
α-monoVINYL-monoPHENYL- Ω-monoHYDRIDE TERMINATED POLYDIMETHYLSILOXANE, 20 cSt [See More]
- Chemical System: Silicone
from Henkel Adhesive Technologies - Aviation, Space and Rail
BERGQUIST GAP PAD TGP 7000ULM is an extremely soft gap filling material rated at a thermal conductivity of 7.0 W/m-K. It is specially formulated for high performance applications requiring low assembly stress. The material offers exceptional thermal performance at low pressures due to the unique... [See More]
- Chemical System: Silicone
- Industry: OEM or Industrial
- Features: Thermally Conductive
- Use Temperature: -76 to 392
from Techsil Limited
SilGrip ® PSA6573A is a pressure sensitive adhesive from Momentive. It has a higher shear and creep resistance to standard silicone pressure sensitive adhesives and displays excellent adhesion to low energy surface materials such as polyethylene, polypropylene, MYLAR ® polyester, KAPTON... [See More]
- Chemical System: Elastomeric; Silicone
- Cure / Technology: Contact or Pressure Sensitive Adhesives
from Henkel Corporation - Industrial
LOCTITE ABLESTIK 813J01 BIPAX, Silicone, Non-corrosive, Encapsulant LOCTITE ® ABLESTIK 813J01 BIPAX exhibits very low stress upon cure thus preventing component cracking and other stress-related problems. This adhesive can be cured at room temperature in thick or thin sections. It is... [See More]
- Chemical System: Silicone
- Features: Thermally Conductive
- Cure / Technology: Single Component
- Viscosity: 40000
from R. S. Hughes Company, Inc.
Loctite SI 594 WH white adhesive/sealant with a 24 hr cure time. Delivers great performance with tensile strength of 116 psi. Maximum operating temperature is +450 F. Formerly known as Loctite Superflex White RTV Silicone. [See More]
- Chemical System: Silicone
- Features: Sealant
- Cure / Technology: Room Temperature Vulcanizing or Curing
- Use Temperature: 450
from Wacker Chemical Corp.
ELASTOSIL ® N199 is a non-slump RTV-1 silicone sealant that cures at room temperature on contact with moisture in the air. Special features. ready-to-use, one-part system. non-slump. translucent. medium hardness. high flexibility. Excellent adhesion. Application. general-purpose adhesive for the... [See More]
- Chemical System: Elastomeric; Silicone
- Features: Flexible; Sealant
- Cure / Technology: Thermoset; Single Component; Reactive or Moisture Cured; Room Temperature Vulcanizing or Curing
- Industry: Electronics
from Gelest, Inc.
Safety. Packaging Under None. VDT-163: Vinylmethylsiloxane-Dimethylsiloxane Copolymer, TMS Terminated (Pendant Functional Fluid). Vinyl containing copolymers are used as crosslinkers in Pt and peroxide 2-part addition cure elastomers. VDT-163 Properties. Viscosity: 2,000,000-4,000,000 cSt. Molecular... [See More]
- Chemical System: Silicone
- Viscosity: 2.00E6 to 4.00E6
from Henkel Adhesive Technologies - Aviation, Space and Rail
BERGQUIST ® LIQUI FORM TLF 6000HG thermally conductive gel interface material is designed to meet the demanding requirements in certain telecom market applications. Its unique formulation assures a balanced mix of high thermal conductivity, good dispensing efficiency and high thermal... [See More]
- Chemical System: Silicone
- Features: Thermally Conductive
- Type / Form: Gel
- Industry: OEM or Industrial
from Techsil Limited
SilGrip ® PSA6573A is a pressure sensitive adhesive from Momentive. It has a higher shear and creep resistance to standard silicone pressure sensitive adhesives and displays excellent adhesion to low energy surface materials such as polyethylene, polypropylene, MYLAR ® polyester, KAPTON... [See More]
- Chemical System: Elastomeric; Silicone
- Cure / Technology: Contact or Pressure Sensitive Adhesives
from Henkel Corporation - Industrial
Silicone paste primarily designed for a wide variety of applications in the fiber optic industry. LOCTITE ® SI 3407 is a black, silicone paste primarily designed for a wide variety of applications in the fiber optic industry. Wide variety of applications in the fiber optic industry [See More]
- Chemical System: Silicone
- Cure / Technology: Single Component
from R. S. Hughes Company, Inc.
Loctite SI 595 clear adhesive/sealant with a 24 hr cure time. Delivers great performance with tensile strength of 120 psi. Minimum to maximum operating temperatures are -65 F to +500 F. Formerly known as Loctite Superflex Clear RTV Silicone. [See More]
- Chemical System: Silicone
- Features: Sealant
- Cure / Technology: Room Temperature Vulcanizing or Curing
- Use Temperature: -65 to 500
from Gelest, Inc.
Safety. Packaging Under Nitrogen [See More]
- Chemical System: Silicone
- Viscosity: 100 to 200
from Techsil Limited
SilGrip ® PSA6573A is a pressure sensitive adhesive from Momentive. It has a higher shear and creep resistance to standard silicone pressure sensitive adhesives and displays excellent adhesion to low energy surface materials such as polyethylene, polypropylene, MYLAR ® polyester, KAPTON... [See More]
- Chemical System: Elastomeric; Silicone
- Cure / Technology: Contact or Pressure Sensitive Adhesives
from Henkel Corporation - Industrial
LOCTITE ABLESTIK ABP 8035, Silicone, Die Attach LOCTITE ® ABLESTIK ABP 8035 adhesive is designed to provide excellent adhesion specially at wirebonding temperature, minimizing failure rate at assembly. This adhesive is ideal for application by automatic dispense or pin-transfer technology. Good... [See More]
- Chemical System: Silicone
from R. S. Hughes Company, Inc.
Loctite SI 595 CL clear adhesive/sealant with a 24 hr cure time. Delivers great performance with tensile strength of 116 psi. Minimum to maximum operating temperatures are -65 F to +450 F. Formerly known as Loctite Superflex Clear RTV Silicone Adhesive Sealant. [See More]
- Chemical System: Silicone
- Features: Sealant
- Cure / Technology: Room Temperature Vulcanizing or Curing
- Use Temperature: -65 to 450
from Gelest, Inc.
Safety. Packaging Under Nitrogen. Pendant Functional Fluid; Methyl Hydrosiloxane-Dimethylsiloxane Copolymer. MethylHydrosiloxane copolymers are the primary cross linkers for 2-part vinyl-addition silicones and intermediates for functional copolymers. Siloxane-Based Silane Reducing Agent. [See More]
- Chemical System: Silicone
- Index of Refraction: 1.4
- Viscosity: 5000 to 8000
from Techsil Limited
Momentive RTV102 is a versatile, ready to use adhesive sealant which cures to a tough, durable resilient silicone rubber. Uncured, this general purpose sealant has a paste consistency which can be applied to vertical and overhead surfaces where pourable/self- levelling sealants are not practical. [See More]
- Chemical System: Elastomeric; Silicone
- Use Temperature: -60 to 204
- Industry: Sanitary
from Henkel Corporation - Industrial
2-part, fast, high strength, neutral cure alkoxy silicone paste adhesive suitable for structural bracket and clip bonding. LOCTITE ® SI 5604 is a black, gray or almond-colored, 2-part, fast, high strength, neutral cure alkoxy silicone paste adhesive designed for bonding applications. It... [See More]
- Chemical System: Silicone
- Features: UL Rating
- Cure / Technology: Two Component
- Use Temperature: 40 to 450
from R. S. Hughes Company, Inc.
Loctite SI 596 RD red adhesive/sealant with a 24 hr cure time. Delivers great performance with tensile strength of 217 psi and peel strength of 9.88 pli. Maximum operating temperature is +600 F. Formerly known as Loctite Superflex Red High Temp RTV Silicone. [See More]
- Chemical System: Silicone
- Features: Sealant
- Cure / Technology: Room Temperature Vulcanizing or Curing
- Use Temperature: 600
from Gelest, Inc.
Safety. Packaging Under None. VDT-123: Vinylmethylsiloxane-Dimethylsiloxane Copolymer, TMS Terminated (Pendant Functional Fluid). Vinyl containing copolymers are used as crosslinkers in Pt and peroxide 2-part addition cure elastomers. VDT-123 Properties. Viscosity: 250-350 cSt. Molecular Weight:... [See More]
- Chemical System: Silicone
- Viscosity: 250 to 350
from Techsil Limited
Momentive RTV102 is a versatile, ready to use adhesive sealant which cures to a tough, durable resilient silicone rubber. Uncured, this general purpose sealant has a paste consistency which can be applied to vertical and overhead surfaces where pourable/self- levelling sealants are not practical. [See More]
- Chemical System: Elastomeric; Silicone
- Use Temperature: -60 to 204
- Industry: Sanitary
from Henkel Corporation - Industrial
Neutral curing alkoxy silicone adhesive paste with quick cure speed. Typical applications include bonding and sealing in the appliance market. LOCTITE ® SI 5606 is a gray, 2-part, thixotropic, neutral curing alkoxy silicone adhesive paste with quick cure speed. Typical applications include... [See More]
- Chemical System: Silicone
- Use Temperature: 250 to 350
- Cure / Technology: Two Component
from R. S. Hughes Company, Inc.
Loctite Superflex 1266142 clear silicone adhesive sealant with a 24 hr cure time. Delivers great performance with tensile strength of 120 psi. Minimum to maximum operating temperatures are -65 F to +450 F. [See More]
- Chemical System: Silicone
- Features: Sealant
- Cure / Technology: Room Temperature Vulcanizing or Curing
- Use Temperature: -65 to 450
from Gelest, Inc.
Safety. Packaging Under None. VDT-127: Vinylmethylsiloxane-Dimethylsiloxane Copolymer, TMS Terminated (Pendant Functional Fluid). Vinyl containing copolymers are used as crosslinkers in Pt and peroxide 2-part addition cure elastomers. VDT-127 Properties. Viscosity: 700-800 cSt. Molecular Weight:... [See More]
- Chemical System: Silicone
- Viscosity: 700 to 800
from Techsil Limited
Momentive RTV103 is a versatile, ready to use adhesive sealant which cures to a tough, durable resilient silicone rubber. Uncured, this general purpose sealant has a paste consistency which can be applied to vertical and overhead surfaces where pourable/self- levelling sealants are not practical. [See More]
- Chemical System: Elastomeric; Silicone
- Use Temperature: -60 to 204
- Industry: Sanitary
from Henkel Corporation - Industrial
2-part, thixotropic, neutral curing alkoxy silicone with medium cure speed at room temperature. LOCTITE ® SI 5607 is a gray 2-part, thixotropic, neutral curing alkoxy silicone with medium cure speed at room temperature. Typical applications include bonding and sealing in the appliance market... [See More]
- Chemical System: Silicone
- Viscosity: 275
- Cure / Technology: Two Component
from R. S. Hughes Company, Inc.
Loctite Superflex 59475 white silicone adhesive sealant with a 24 hr cure time. Delivers great performance with tensile strength of 116 psi. Minimum to maximum operating temperatures are -65 F to +450 F. [See More]
- Chemical System: Silicone
- Use Temperature: -65 to 450
- Features: Sealant
from Gelest, Inc.
Safety. Packaging Under None. VDT-131: Vinylmethylsiloxane-Dimethylsiloxane Copolymer, TMS Terminated (Pendant Functional Fluid). Vinyl containing copolymers are used as crosslinkers in Pt and peroxide 2-part addition cure elastomers. VDT-131 Properties. Viscosity: 800-1,200 cSt. Molecular Weight:... [See More]
- Chemical System: Silicone
- Viscosity: 800 to 1200
from Techsil Limited
Momentive RTV106 is a versatile, ready to use adhesive sealant which cures to a tough, durable resilient silicone rubber. Uncured, this high temperature general purpose sealant has a paste consistency which can be applied to vertical and overhead surfaces where pourable/self- levelling sealants are... [See More]
- Chemical System: Elastomeric; Silicone
- Use Temperature: -60 to 260
- Industry: Sanitary
from Henkel Corporation - Industrial
Translucent, viscous, UV light/moisture-cure acetoxy adhesive good for elastic bonding, sealing and leak-proofing on glass, metals and ceramics. LOCTITE ® SI 5083 is a translucent, slightly milky, UV light and atmospheric moisture-cured, thixotropic acetoxy silicone adhesive paste which forms a... [See More]
- Chemical System: Silicone
- Substrate Compatibility: Ceramic, Glass; Metal
- Cure / Technology: UV or Radiation Cured; Single Component
- Viscosity: 55000
from R. S. Hughes Company, Inc.
Loctite Superflex 82279 red silicone adhesive sealant with a 24 hr cure time. Delivers great performance with tensile strength of 217 psi and peel strength of 9.88 pli. Minimum to maximum operating temperatures are -75 F to +600 F. [See More]
- Chemical System: Silicone
- Features: Sealant
- Cure / Technology: Room Temperature Vulcanizing or Curing
- Use Temperature: -75 to 600
from Gelest, Inc.
Safety. Packaging Under None [See More]
- Chemical System: Silicone
- Viscosity: 25 to 40
from Techsil Limited
Momentive RTV106 is a versatile, ready to use adhesive sealant which cures to a tough, durable resilient silicone rubber. Uncured, this high temperature general purpose sealant has a paste consistency which can be applied to vertical and overhead surfaces where pourable/self- levelling sealants are... [See More]
- Chemical System: Elastomeric; Silicone
- Use Temperature: -60 to 260
- Industry: Sanitary
from R. S. Hughes Company, Inc.
Loctite Superflex SI 5109 RD red silicone adhesive sealant with a 24 hr cure time. Maximum operating temperature is +600 F. Formerly known as Loctite Tile Bond Red High Temp RTV. [See More]
- Chemical System: Silicone
- Features: Sealant
- Cure / Technology: Room Temperature Vulcanizing or Curing
- Use Temperature: 600
from Gelest, Inc.
Safety. Packaging Under None [See More]
- Chemical System: Silicone
- Viscosity: 2.5
from Techsil Limited
DETAILS. Momentive RTV108 is a versatile, ready to use adhesive sealant which cures to a tough, durable resilient silicone rubber. Uncured, this general purpose sealant has a paste consistency which can be applied to vertical and overhead surfaces where pourable/self- levelling sealants are not... [See More]
- Chemical System: Elastomeric; Silicone
- Use Temperature: -60 to 204
- Features: Sealant
from R. S. Hughes Company, Inc.
Loctite Superflex SI 5109 RD red silicone adhesive sealant with a 24 hr cure time. Maximum operating temperature is +600 F. Formerly known as Loctite Tile Bond Red High Temp RTV. [See More]
- Chemical System: Silicone
- Features: Sealant
- Cure / Technology: Room Temperature Vulcanizing or Curing
- Use Temperature: 600
from Gelest, Inc.
Safety. Packaging Under None. VDT-954: Vinylmethylsiloxane-Dimethylsiloxane Copolymer, TMS Terminated (Pendant Functional Fluid). Vinyl containing copolymers are used as crosslinkers in Pt and peroxide 2-part addition cure elastomers. VDT-954 Properties. Viscosity: 300,000-500,000 cSt. Molecular... [See More]
- Chemical System: Silicone
- Viscosity: 300000 to 500000
from Techsil Limited
DETAILS. Momentive RTV109 is a versatile, ready to use adhesive sealant which cures to a tough, durable resilient silicone rubber. Uncured, this general purpose sealant has a paste consistency which can be applied to vertical and overhead surfaces where pourable/self- levelling sealants are not... [See More]
- Chemical System: Elastomeric; Silicone
- Industry: Sanitary
- Features: Sealant
- Use Temperature: -60 to 204
from R. S. Hughes Company, Inc.
Momentive black IS800 silicone adhesive sealant with a 24 hr cure time. Provides a 25 min fixture time. Delivers great performance with a shear strength of 150 psi, tensile strength of 300 psi and peel strength of 37 psi. [See More]
- Chemical System: Silicone
- Features: Sealant
from Gelest, Inc.
Safety. Packaging Under Nitrogen. Siloxane-Based Silane Reducing Agent. Organosilanes are hydrocarbon-like and possess the ability to serve as both ionic and free-radical reducing agents. These reagents and their reaction by-products are safer and more easily handled and disposed than many other... [See More]
- Chemical System: Silicone
- Index of Refraction: 1.4
- Viscosity: 25 to 35
from Techsil Limited
Momentive RTV112 is a versatile, ready to use adhesive sealant which cures to a tough, durable resilient silicone rubber. Uncured, this general purpose sealant is a self-levelling product which is more preferable to other sealants with a paste consistency when using it to flow in to small crevices... [See More]
- Chemical System: Elastomeric; Silicone
- Use Temperature: -60 to 204
- Industry: Sanitary
from R. S. Hughes Company, Inc.
Momentive white IS802 silicone adhesive sealant is compatible with rubber materials with a 24 hr cure time. Provides a 25 min fixture time. Delivers great performance with a shear strength of 150 psi, tensile strength of 300 psi and peel strength of 37 psi. [See More]
- Chemical System: Silicone
- Features: Sealant
from Gelest, Inc.
Safety. Packaging Under Nitrogen [See More]
- Chemical System: Silicone
from Techsil Limited
Momentive RTV116 is a versatile, ready to use adhesive sealant which cures to a tough, durable resilient silicone rubber. Uncured, this high temperature general purpose sealant has a self levelling consistency which is ideal for use to flow in to small crevices and hard to reach places. RTV116 will... [See More]
- Chemical System: Elastomeric; Silicone
- Use Temperature: -60 to 260
- Industry: Sanitary
from R. S. Hughes Company, Inc.
Momentive white IS802 silicone adhesive sealant is compatible with rubber materials with a 24 hr cure time. Provides a 25 min fixture time. Delivers great performance with a shear strength of 150 psi, tensile strength of 300 psi and peel strength of 37 psi. [See More]
- Chemical System: Silicone
- Features: Sealant
from Gelest, Inc.
Additional Properties. Surface Tension (mN/m) 21.1. Safety. Packaging Under Nitrogen [See More]
- Chemical System: Silicone
- Index of Refraction: 1.38
- Viscosity: 4000 to 7000