Medical / Food (Sanitary / FDA) Industrial Adhesives
from MacDermid Alpha Electronics Solutions
Solvent-based adhesive for temporary bonding, ideal for GaAs/silicon wafer thinning. Debonds with IPA, no residue. Product Overview. A solvent-based polymer specially developed for temporary bonding applications. STAYSTIK 336T thermoplastic adhesive paste is a low-modulus polymer specially developed... [See More]
- Industry: Aerospace; Electronics; Sanitary; Semiconductors, IC's
- Cure / Technology: Thermoplastic / Hot Melt
from Master Bond, Inc.
UV17Med is a low viscosity, UV curable system with an affinity for bonding to a wide array of thermoplastic urethanes and passes stringent ISO10993-5 cytotoxicity standards. [See More]
- Industry: Aerospace; Electronics; Sanitary; Photonics; OEM or Industrial
- Cure / Technology: UV or Radiation Cured; Single Component
- Composition: Unfilled
- Features: High Dielectric; Non-corrosive; Sealant
from Ellsworth Adhesives
3M Scotch-Weld DP8910NS Black is an acrylic structural adhesive that bonds to nylon (polyamides) without plasma or flame treatment surface preparation. It is ideal for high humidity and high temperature applications with a fast cure time and excellent adhesion to stainless steel, aluminum, and other... [See More]
- Industry: Sanitary
- Cure / Technology: Two Component
- Chemical System: Acrylic
- Substrate Compatibility: Composites
from Master Bond, Inc.
Master Bond LED405Med is a one part, nano filled system that cures quickly upon exposure to a 405 nm LED light. It does not require a UV light source. It meets ISO 10993-5 for cytotoxicity and resists sterilization. It can cure up to 1/8 think and has low shrinkage upon cure. It also features... [See More]
- Industry: Aerospace; Automotive; Electronics; Electric Power; Marine; Sanitary; Optical; Photonics; OEM or Industrial; Semiconductors, IC's; Tooling
- Cure / Technology: Thermoset; Single Component; LED Cure
- Composition: Filled
- Type / Form: Liquid
from Ellsworth Adhesives
3M Scotch-Weld DP8910NS Black is an acrylic structural adhesive that bonds to nylon (polyamides) without plasma or flame treatment surface preparation. It is ideal for high humidity and high temperature applications with a fast cure time and excellent adhesion to stainless steel, aluminum, and other... [See More]
- Industry: Sanitary
- Cure / Technology: Two Component
- Chemical System: Acrylic
- Substrate Compatibility: Composites
from Master Bond, Inc.
EP3HTND-2Med Black is a one part system that combines easy processing with excellent bonding properties. It cures in 20-30 minutes at 250°F or 5-10 minutes at 300°F and adheres well to a wide variety of substrates including glass, metals, ceramics and most plastics. This paste compound meets USP... [See More]
- Industry: Aerospace; Electronics; Electric Power; Marine; Sanitary; Photonics; Semiconductors, IC's
- Composition: Unfilled
- Chemical System: Epoxy
- Cure / Technology: Thermoset; Single Component
from Ellsworth Adhesives
3M Scotch-Weld DP8910NS Black is an acrylic structural adhesive that bonds to nylon (polyamides) without plasma or flame treatment surface preparation. It is ideal for high humidity and high temperature applications with a fast cure time and excellent adhesion to stainless steel, aluminum, and other... [See More]
- Industry: Sanitary
- Cure / Technology: Two Component
- Chemical System: Acrylic
- Substrate Compatibility: Composites
from Master Bond, Inc.
EP40Med is a two component, room temperature curing epoxy with high elongation that passes ISO 10993-5 for cytotoxicity. It features exceptional adhesion to polycarbonates and acrylics. [See More]
- Industry: Electronics; Sanitary; OEM or Industrial
- Composition: Unfilled
- Chemical System: Epoxy
- Cure / Technology: Thermoset; Two Component ; Room Temperature Vulcanizing or Curing
from Ellsworth Adhesives
3M Scotch-Weld DP8910NS Black is an acrylic structural adhesive that bonds to nylon (polyamides) without plasma or flame treatment surface preparation. It is ideal for high humidity and high temperature applications with a fast cure time and excellent adhesion to stainless steel, aluminum, and other... [See More]
- Industry: Sanitary
- Cure / Technology: Two Component
- Chemical System: Acrylic
- Substrate Compatibility: Composites
from Master Bond, Inc.
Passing both USP Class VI testing and ISO cytotoxicity specifications, MasterSil 910Med is formulated for bonding, sealing, coating in medical device applications. As an acetoxy type system, it bonds exceptionally well to a wide variety of substrates including metals, composites, ceramics, glass as... [See More]
- Industry: Aerospace; Automotive; Electronics; Electric Power; Marine; Sanitary; OEM or Industrial; Semiconductors, IC's; Tooling
- Composition: Unfilled
- Chemical System: Silicone
- Cure / Technology: Thermoset; Single Component
from Ellsworth Adhesives
Dymax Ultra Light-Weld ® 1187-M UV Curing Adhesive Yellow is a one component medical device adhesive. It is designed for rapid bonding of rigid plastics typically used in the manufacture of medical devices. It offers UV/Visible light cure and blue fluorescing. 160 mL Cartridge. [See More]
- Industry: Sanitary
- Substrate Compatibility: Plastic
- Cure / Technology: Single Component
- Viscosity: 450
from Master Bond, Inc.
Master Bond Polymer System EP45HTMed is a two component heat cured epoxy system for high performance structural bonding, sealing, coating and casting. It is especially designed for the assembly of reusable medical devices which must be sterilized repeatedly by radiation, sterilant and steam... [See More]
- Industry: Aerospace; Automotive; Electronics; Electric Power; Marine; Sanitary; OEM or Industrial; Semiconductors, IC's; Tooling
- Composition: Unfilled
- Chemical System: Epoxy
- Cure / Technology: Thermoset; Two Component
from Ellsworth Adhesives
Henkel Loctite 3301 is primarily designed for bonding rigid or flexible PVC to polycarbonate enabling easy assembly of components with close fitting tolerances (i.e. joining polycarbonate to flexible PVC tubing). 25 mL Syringe. [See More]
- Industry: Sanitary
- Substrate Compatibility: Metal; Plastic
- Cure / Technology: Single Component
- Viscosity: 90 to 210
from Master Bond, Inc.
Master Bond Polymer System EP21HT is a two component, room temperature curing epoxy adhesive, sealant and coating featuring a forgiving 1 to 1 mix ratio and high temperature resistance up to 400 °F. EP21HT produces high strength, durable bonds that hold up well to thermal cycling and resist many... [See More]
- Industry: Aerospace; Automotive; Electronics; Electric Power; Marine; Sanitary; Military; OEM or Industrial; Semiconductors, IC's; Tooling
- Cure / Technology: Thermoset; Two Component
- Chemical System: Epoxy
- Type / Form: Liquid
from Ellsworth Adhesives
Henkel Loctite 3311 is primarily designed for bonding rigid or flexible PVC to polycarbonate, without inducing stress cracking under typical molded stress levels. It enables easy assembly of components with close fitting tolerances (i.e. joining polycarbonate to flexible PVC tubing), and is... [See More]
- Industry: Sanitary
- Substrate Compatibility: Metal; Plastic
- Cure / Technology: Single Component
- Viscosity: 200 to 400
from Master Bond, Inc.
Master Bond Polymer Adhesive EP30HT is a medium viscosity, two component epoxy adhesive for general purpose bonding formulated to cure at room temperature or more rapidly at elevated temperatures, with a four (4) to one (1) mix ratio by weight. This adhesive is 100% reactive and does not contain any... [See More]
- Industry: Aerospace; Automotive; Electronics; Electric Power; Marine; Sanitary; Optical; OEM or Industrial; Semiconductors, IC's; Tooling
- Cure / Technology: Thermoset; Two Component
- Chemical System: Epoxy
- Type / Form: Liquid
from Ellsworth Adhesives
Henkel Loctite 3311 is primarily designed for bonding rigid or flexible PVC to polycarbonate, without inducing stress cracking under typical molded stress levels. It enables easy assembly of components with close fitting tolerances (i.e. joining polycarbonate to flexible PVC tubing), and is... [See More]
- Industry: Sanitary
- Substrate Compatibility: Metal; Plastic
- Cure / Technology: Single Component
- Viscosity: 200 to 400
from Master Bond, Inc.
UV10TKMed is USP Class VI approved and meets ISO10993-5 for cytotoxicity requirements. It is used in the assembly of medical devices and is capable of withstanding repeated sterilizations, including radiation, ethylene oxide, chemical sterilants and especially autoclaving. This higher viscosity, one... [See More]
- Industry: Aerospace; Automotive; Electronics; Electric Power; Marine; Sanitary; OEM or Industrial; Semiconductors, IC's; Tooling
- Composition: Unfilled
- Chemical System: Epoxy
- Cure / Technology: Thermoset; UV or Radiation Cured; Single Component
from Ellsworth Adhesives
Henkel Loctite 3341 is a UV/Visible light curing acrylic adhesive that is designed for boding heavily plasticized PVC. It is ISO 10993 Biological Tested for use in the assembly of disposable medical devices. 25 mL Syringe. [See More]
- Industry: Sanitary
- Substrate Compatibility: Plastic
- Cure / Technology: Single Component
- Viscosity: 400 to 650
from Master Bond, Inc.
MasterSil 151TC is a highly flexible, temperature resistant two component silicone adhesive offering low thermal resistance and outstanding thermal conductivity. It was developed to improve thermal management for electronic assemblies in bonding and gap filling applications. [See More]
- Industry: Aerospace; Automotive; Electronics; Electric Power; Marine; Sanitary; Photonics; OEM or Industrial; Semiconductors, IC's
- Composition: Filled
- Chemical System: Silicone
- Cure / Technology: Thermoset; Two Component ; Room Temperature Vulcanizing or Curing
from Ellsworth Adhesives
Henkel Loctite 3971 is a low viscosity, UV/Visible light curing acrylic adhesive suitable for applications that require fast cure and high adhesion to plasticized materials. It is ideal for bonding a wide variety of glass, plastic and metal components and is ISO 10993 Biological Tested for use in... [See More]
- Industry: Sanitary
- Viscosity: 200 to 425
- Cure / Technology: Single Component
- Tensile (Break): 3700
from Master Bond, Inc.
Master Bond EP4G-80Med is a one part epoxy designed for use in the assembly of medical devices. This system is formulated with a non-metallic, graphite filler, which leads to good thermal and electrical conductivity. [See More]
- Industry: Electronics; Sanitary; OEM or Industrial
- Composition: Filled
- Chemical System: Epoxy
- Cure / Technology: Thermoset; Single Component
from Ellsworth Adhesives
Henkel Loctite 3971 is a low viscosity, UV/Visible light curing acrylic adhesive suitable for applications that require fast cure and high adhesion to plasticized materials. It is ideal for bonding a wide variety of glass, plastic and metal components and is ISO 10993 Biological Tested for use in... [See More]
- Industry: Sanitary
- Viscosity: 200 to 425
- Cure / Technology: Single Component
- Tensile (Break): 3700
from Master Bond, Inc.
Master Bond X21Med is a toughened one part system that can be used for bonding and priming polyolefinic surfaces. This exceptionally low viscosity ( <250 cps) solvent based system is easy to apply and process. It cures at room temperature or more rapidly with the addition of heat. X21Med passes... [See More]
- Industry: Aerospace; Automotive; Electronics; Electric Power; Marine; Sanitary; Photonics; OEM or Industrial; Semiconductors, IC's
- Composition: Unfilled
- Chemical System: Polyolefin
- Cure / Technology: Thermoset; Single Component; Room Temperature Vulcanizing or Curing
from Ellsworth Adhesives
Henkel Loctite 3979 is a UV/Visible light curing acrylic adhesive designed for medical bonding applications where the fluorescent properties of substrates interferes with the detection of the adhesive. 25 mL Syringe. [See More]
- Industry: Sanitary
- Viscosity: 7000 to 78000
- Cure / Technology: Single Component
- Tensile (Break): 2620
from Master Bond, Inc.
Formulated for medical electronic applications, Master Bond EP62-1LPSPMed is a biocompatible two part epoxy that has a an ultra low viscosity. This makes it makes it ideal for use in underfill, impregnation and porosity sealing applications, while it also performs well in bonding, coating or... [See More]
- Industry: Electronics; Sanitary; Photonics; Semiconductors, IC's
- Composition: Unfilled
- Chemical System: Epoxy
- Cure / Technology: Thermoset; Two Component
from Ellsworth Adhesives
Henkel Loctite 3981 is a low viscosity, heat curing epoxy adhesive suitable for applications that require fast cure, excellent environmental resistance and high adhesion. The product cures rapidly when exposed to temperatures as low as 100 °C and achieves excellent adhesion to plastics, metals... [See More]
- Industry: Sanitary
- Cure / Technology: Single Component
- Chemical System: Epoxy
- Viscosity: 4000 to 6000
from Mitsubishi Chemical Carbon Fiber and Composites, Inc.
Mitsubishi Chemical Carbon Fiber and Composites, Inc. manufacturing facility utilizes advanced, highly efficient production equipment and technology. This enables us to provide our customers with the advanced composite materials they require. Our facility can process nearly every high performance... [See More]
- Industry: Sanitary; OEM or Industrial; Sporting Goods
- Cure / Technology: Cure Temperature: 250 - 320 F
- Chemical System: Epoxy
- Type / Form: Sheet or Film
from Techsil Limited
Momentive RTV102 is a versatile, ready to use adhesive sealant which cures to a tough, durable resilient silicone rubber. Uncured, this general purpose sealant has a paste consistency which can be applied to vertical and overhead surfaces where pourable/self- levelling sealants are not practical. [See More]
- Industry: Sanitary
- Use Temperature: -60 to 204
- Chemical System: Elastomeric; Silicone
from Graphene Laboratories, Inc.
Our G6E-TSHV ™ Epoxy has been specifically developed for general purpose applications that necessitate the bonding or connecting of thermally conductive components/materials. It is designed to provide efficient heat transfer between components or surfaces, while also providing the bonding and... [See More]
- Industry: Aerospace; Automotive; Electronics; Electric Power; Sanitary; Thermal Interface Materials (TIMs), Solar panels
- Composition: Filled
- Chemical System: Epoxy
- Cure / Technology: Two Component ; Room Temperature Vulcanizing or Curing
from Chemence Inc.
Krylex KU3064 is a revolutionary odorless light curing cyanoacrylate adhesive. It is designed for bonding applications that require very rapid fixture, fillet cure or surface cure. The UV / visible light cure properties facilitate rapid curing of exposed surface areas while the moisture curing... [See More]
- Industry: Electronics; Sanitary; OEM or Industrial; Printing, Medical use and General Industrial Assembly
- Cure / Technology: Anaerobic; UV or Radiation Cured; Single Component; Reactive or Moisture Cured
- Chemical System: Cyanoacrylate
- Type / Form: Liquid
from Qosina Corp.
Medical adhesives help your team stick to the project plan. Qosina offers a variety of UV-curable and cyanoacrylate instant adhesives from H.B. Fuller that are in stock and ready for immediate delivery. Medical-Grade Partnerships. H.B. Fuller connects innovation with opportunity, and Qosina is proud... [See More]
- Industry: Sanitary
- Cure / Technology: UV or Radiation Cured
- Chemical System: Acrylic
- Type / Form: Liquid
from Epoxy Technology
EPO-TEK ® medical grade (or biocompatible) epoxy adhesives are used extensively throughout the healthcare and biotech industries. Device manufacturers making cardiac, ophthalmic, skeletal and neurological implants rely on our adhesives for protection, while the endoscopy camera market... [See More]
- Industry: Sanitary; Optical; Photonics
- Cure / Technology: Thermoset; Two Component ; Room Temperature Vulcanizing or Curing
- Chemical System: Epoxy
- Type / Form: Liquid
from Wacker Chemical Corp.
ELASTOSIL ® 5100 is a one-component, acid-curing, low modulus silicone sealant for sanitary applications. Special features. suitable for use in sanitary areas. non-sag. ready gunnability at low (+ 5 °C) and high (+ 40 °C) temperatures. flexible at low (- 40 °C) and high temperatures... [See More]
- Industry: Sanitary; Construction
- Cure / Technology: Thermoset; Single Component; Reactive or Moisture Cured; Room Temperature Vulcanizing or Curing
- Chemical System: Elastomeric; Silicone
- Type / Form: Gel
from Protavic America, Inc.
ANE-57103 is a toughened two part adhesive. ANE-57103 is used for high speed bonding even at lower temperatures. ANE-57103is specifically developed for bonding difficult substrates such as glass, ceramics, metals and engineered plastics. Proven applications are bonding MRI magnets under full load,... [See More]
- Industry: Automotive; Electronics; Electric Power; Sanitary; Military; OEM or Industrial; Semiconductors, IC's
- Composition: Filled
- Chemical System: Epoxy
- Cure / Technology: Thermoset; Two Component
from DuPont Electronics & Imaging
DuPont ™ Pyralux ® HP is an epoxy-based adhesive system demonstrating both low loss and high reliability, specifically designed for OEMs and PCB design manufacturers. Its optimized low-loss solution is suitable for multi-layer flex and rigid-flex designs for military, automotive and... [See More]
- Industry: Automotive; Electronics; Sanitary; Military; OEM or Industrial
- Chemical System: Epoxy
from Henkel Corporation - Industrial
LOCTITE ABLESTIK FDA 2 BIPAX, Epoxy, Medical LOCTITE ® ABLESTIK FDA 2 BIPAX is designed for medical device applications. This material bonds offer resistance to water, weather, galvanic action, petroleum solvents, lubricants, fuels, mild acids and alkalis and other organic and inorganic... [See More]
- Industry: Sanitary
- Cure / Technology: Two Component
- Chemical System: Epoxy
- Substrate Compatibility: Metal
from Hapco, Inc.
Elastomeric Series. Various hardness elastomers, shore 20A - 72D. Clear in color. Available in 2 speeds - fast and slow. STERalloy FDG is the first Liquid Molding Polymer Alloy Series that has been specifically designed for food and drug applications. All of the products in the STERalloy FDG Series... [See More]
- Industry: Sanitary; Tooling
- Composition: Unfilled
- Chemical System: Elastomeric; Polyurethane
- Cure / Technology: Two Component
from Epoxies Etc...
10-3033 is a room temperature curing, two component, epoxy. This system meets the Food and Drug Administration (FDA) regulations permitting use in food contact applications. When properly cured, these products comply with the FDA regulations of Title 21 Code of Federal Regulations under Sections... [See More]
- Industry: Sanitary; OEM or Industrial
- Composition: Unfilled
- Chemical System: Epoxy
- Cure / Technology: Thermoset; Two Component ; Room Temperature Vulcanizing or Curing
from R. S. Hughes Company, Inc.
Loctite Hysol 30680 amber M-121HP medical device epoxy adhesive is compatible with ceramic, glass, metal, pvc and thermoplastic materials. Provides a 2 hr working time. Works in a mix ratio of 2:1. Delivers great performance with tensile strength of 5910 psi. Minimum to maximum operating... [See More]
- Industry: Sanitary
- Features: Leveling Filling
- Chemical System: Epoxy
- Viscosity: 110000
from Shenzhen DeepMaterial Technologies Co., Ltd
Mainly used for polycarbonate bonding, and will not produce stress cracking under typical compression stress. It can be quickly cured under sufficient UV or visible light to form a flexible and transparent adhesive layer. This product is suitable for most substrates, including Glass, many plastics... [See More]
- Industry: Sanitary
- Substrate Compatibility: Ceramic, Glass; Metal; Plastic
- Cure / Technology: UV or Radiation Cured; Single Component
- Use Temperature: -67 to 302
from Sheldahl Flexible Technologies - a Flex company
We have core strength in vacuum deposition via sputtering ad thermal evaporation. Our materials are used for numerous applications, including passive thermal control for satellites and launch vehicles, thermal insulation for F1 racing cars and fire suits, and robust materials for audio and medical... [See More]
- Industry: Aerospace; Automotive; Electronics; Sanitary; Military; OEM or Industrial
- Features: Flame Retardant; Laminaes; Thermal Insulation
from Techsil Limited
Momentive RTV102 is a versatile, ready to use adhesive sealant which cures to a tough, durable resilient silicone rubber. Uncured, this general purpose sealant has a paste consistency which can be applied to vertical and overhead surfaces where pourable/self- levelling sealants are not practical. [See More]
- Industry: Sanitary
- Use Temperature: -60 to 204
- Chemical System: Elastomeric; Silicone
from Graphene Laboratories, Inc.
Our G6E-TSAL ™ Epoxy has been specifically developed for general purpose applications that necessitate the bonding or connecting of thermally conductive components/materials. It is designed to provide efficient heat transfer between components or surfaces, while also providing the bonding and... [See More]
- Industry: Aerospace; Automotive; Electronics; Electric Power; Sanitary; Thermal Interface Materials (TIMs), Solar panels
- Composition: Filled
- Chemical System: Epoxy
- Cure / Technology: Two Component ; Room Temperature Vulcanizing or Curing
from Henkel Corporation - Industrial
LOCTITE ABLESTIK FDA 2T, Epoxy, Medical LOCTITE ® ABLESTIK FDA 2T is designed for medical device applications. LOCTITE ABLESTIK FDA 2T bonds offer resistance to water, weather, galvanic action, petroleum solvents, lubricants, fuels, mild acids and alkalis and other organic and inorganic... [See More]
- Industry: Sanitary
- Cure / Technology: Two Component
- Chemical System: Epoxy
- Substrate Compatibility: Ceramic, Glass; Metal; Plastic
from Hapco, Inc.
Rigid Series. Rigid, tough polymer alloy plastics. High heat distortion. High physical properties. STERalloy FDG is the first Liquid Molding Polymer Alloy Series that has been specifically designed for food and drug applications. All of the products in the STERalloy FDG Series exhibit unique... [See More]
- Industry: Sanitary; Tooling
- Composition: Unfilled
- Chemical System: Polyurethane
- Cure / Technology: Two Component
from Epoxies Etc...
10-3039 is a room temperature curing, two component epoxy. This system meets the Food and Drug Administration (FDA) regulations permitting use in food contact applications. When properly cured, these products comply with the FDA regulations of Title 21 Code of Federal Regulations under Sections... [See More]
- Industry: Sanitary
- Composition: Filled
- Chemical System: Epoxy
- Cure / Technology: Thermoset; Two Component
from R. S. Hughes Company, Inc.
Loctite Hysol 30671 off-white M-21HP medical device epoxy adhesive is compatible with ceramic, glass, metal and thermoplastic materials. Provides a 20 min working time. Works in a mix ratio of 2:1. Delivers great performance with tensile strength of 5700 psi. Minimum to maximum operating... [See More]
- Industry: Sanitary
- Features: Leveling Filling
- Chemical System: Epoxy
- Viscosity: 37000
from Techsil Limited
Momentive RTV103 is a versatile, ready to use adhesive sealant which cures to a tough, durable resilient silicone rubber. Uncured, this general purpose sealant has a paste consistency which can be applied to vertical and overhead surfaces where pourable/self- levelling sealants are not practical. [See More]
- Industry: Sanitary
- Use Temperature: -60 to 204
- Chemical System: Elastomeric; Silicone
from Henkel Corporation - Industrial
LOCTITE ABLESTIK FDA 8, Epoxy, Medical LOCTITE ® ABLESTIK FDA 8 is designed for bonding and coating applications. LOCTITE ABLESTIK FDA 8 bonds offer resistance to water and weathering, galvanic action, petroleum solvents, lubricants, fuels, mild acids and alkalis and other organic and inorganic... [See More]
- Industry: Sanitary
- Cure / Technology: Two Component
- Chemical System: Epoxy
- Substrate Compatibility: Ceramic, Glass; Metal; Plastic
from Epoxies Etc...
20-3062 is a room temperature curing, two component, epoxy potting compound, adhesive, and coating system. Both the 20-3062 and 20-3062 LV, (Low Viscosity version of 20-3062), meet the Food and Drug Administration (FDA) regulations permitting use in food contact applications. When properly cured,... [See More]
- Industry: Electronics; Sanitary
- Composition: Unfilled
- Chemical System: Epoxy
- Cure / Technology: Thermoset; Two Component ; Room Temperature Vulcanizing or Curing
from R. S. Hughes Company, Inc.
Loctite Hysol 30673 clear M-31CL medical device adhesive is compatible with ceramic, glass, metal and thermoplastic materials. Provides a 30 min working time. Works in a mix ratio of 2:1. Delivers great performance with tensile strength of 8000 psi. Minimum to maximum operating temperatures are -65... [See More]
- Industry: Sanitary
- Features: Leveling Filling
- Chemical System: Epoxy
- Viscosity: 6000
from Techsil Limited
Momentive RTV106 is a versatile, ready to use adhesive sealant which cures to a tough, durable resilient silicone rubber. Uncured, this high temperature general purpose sealant has a paste consistency which can be applied to vertical and overhead surfaces where pourable/self- levelling sealants are... [See More]
- Industry: Sanitary
- Use Temperature: -60 to 260
- Chemical System: Elastomeric; Silicone
from Henkel Corporation - Industrial
Cyanoacrylate liquid adhesive designed to provide fast room temperature fixturing. LOCTITE ® 4013 is a colorless to transparent, slightly yellow, cyanoacrylate liquid adhesive designed to provide fast room temperature fixturing. It is suitable for use in the assembly of disposable medical... [See More]
- Industry: Sanitary
- Cure / Technology: Single Component
- Chemical System: Cyanoacrylate
- Type / Form: Liquid
from Techsil Limited
Momentive RTV106 is a versatile, ready to use adhesive sealant which cures to a tough, durable resilient silicone rubber. Uncured, this high temperature general purpose sealant has a paste consistency which can be applied to vertical and overhead surfaces where pourable/self- levelling sealants are... [See More]
- Industry: Sanitary
- Use Temperature: -60 to 260
- Chemical System: Elastomeric; Silicone
from Henkel Corporation - Industrial
Ethyl-based instant adhesive, mainly for plastics. Fast room temperature fixturing. ISO 10993 certified. LOCTITE ® 4014 is a transparent, colorless, ethyl-based instant adhesive that is designed to provide fast room temperature fixturing, particularly for plastic substrates. Typical... [See More]
- Industry: Sanitary
- Gap Fill: 0.0060
- Viscosity: 3
- Use Temperature: 140 to 170
from Techsil Limited
DETAILS. Momentive RTV109 is a versatile, ready to use adhesive sealant which cures to a tough, durable resilient silicone rubber. Uncured, this general purpose sealant has a paste consistency which can be applied to vertical and overhead surfaces where pourable/self- levelling sealants are not... [See More]
- Industry: Sanitary
- Features: Sealant
- Chemical System: Elastomeric; Silicone
- Use Temperature: -60 to 204
from Henkel Corporation - Industrial
Low viscosity ethyl-based instant adhesive. ISO 10993 certified. colorless and transparent. LOCTITE ® 4061 is a transparent, colorless, low viscosity, ethyl-based instant adhesive that is particularly suitable for plastics and rubbers. It can also bond polyolefins in combination with Primer... [See More]
- Industry: Sanitary
- Gap Fill: 0.0060
- Viscosity: 20
from Techsil Limited
Momentive RTV112 is a versatile, ready to use adhesive sealant which cures to a tough, durable resilient silicone rubber. Uncured, this general purpose sealant is a self-levelling product which is more preferable to other sealants with a paste consistency when using it to flow in to small crevices... [See More]
- Industry: Sanitary
- Use Temperature: -60 to 204
- Chemical System: Elastomeric; Silicone
from Henkel Corporation - Industrial
Transparent, colorless to light yellow, 1-part, very low viscosity, alkoxyethyl-based cyanoacrylate adhesive. LOCTITE ® 4081 is a transparent, colorless to light yellow, 1-part, very low viscosity, moisture-cured, alkoxyethyl-based cyanoacrylate adhesive. It is particularly suitable for... [See More]
- Industry: Sanitary
- Gap Fill: 0.0020
- Viscosity: 7
from Techsil Limited
Momentive RTV116 is a versatile, ready to use adhesive sealant which cures to a tough, durable resilient silicone rubber. Uncured, this high temperature general purpose sealant has a self levelling consistency which is ideal for use to flow in to small crevices and hard to reach places. RTV116 will... [See More]
- Industry: Sanitary
- Use Temperature: -60 to 260
- Chemical System: Elastomeric; Silicone
from Henkel Corporation - Industrial
Transparent, colorless, 1-part, high viscosity, general-purpose ethyl cyanoacrylate liquid instant adhesive. LOCTITE ® 4161 is a transparent, colorless, 1-part, high viscosity, moisture-cured, general-purpose ethyl cyanoacrylate liquid instant adhesive. It is suitable for use in the assembly of... [See More]
- Industry: Sanitary
- Gap Fill: 0.0100
- Viscosity: 1575
from Techsil Limited
Momentive RTV118 is a versatile, ready to use adhesive sealant which cures to a tough, durable resilient silicone rubber. Uncured, this general purpose sealant is a self-levelling product which is more preferable to other sealants with a paste consistency when using it to flow in to small crevices... [See More]
- Industry: Sanitary
- Use Temperature: -60 to 204
- Chemical System: Elastomeric; Silicone
from Henkel Corporation - Industrial
Ethyl/butyl cyanoacrylate adhesive liquid for the assembly of difficult-to-bond materials. Specifically formulated to provide flexible bondlines. LOCTITE ® 4851 is a clear, colorless, ethyl/butyl cyanoacrylate adhesive liquid designed for the assembly of difficult-to-bond materials and is... [See More]
- Industry: Sanitary
- Cure / Technology: Single Component
- Chemical System: Cyanoacrylate
- Type / Form: Liquid
from Techsil Limited
DETAILS. Momentive RTV118 is a versatile, ready to use adhesive sealant which cures to a tough, durable resilient silicone rubber. Uncured, this general purpose sealant is a self-levelling product which is more preferable to other sealants with a paste consistency when using it to flow in to small... [See More]
- Industry: Sanitary
- Use Temperature: -60 to 204
- Chemical System: Elastomeric; Silicone
from Henkel Corporation - Industrial
Highly flexible ethyl and octyl cyanoacrylate instant adhesive designed for the assembly of flexible medical devices. LOCTITE ® 4902 is a colorless, clear, highly flexible ethyl and octyl cyanoacrylate instant adhesive designed for the assembly of flexible medical devices. It offers significant... [See More]
- Industry: Sanitary
- Type / Form: Liquid
- Chemical System: Cyanoacrylate
- Gap Fill: 0.0790
from Henkel Corporation - Industrial
Highly flexible, ethyl and octyl cyanoacrylate adhesive liquid for the assembly of flexible medical devices. LOCTITE ® 4903 is a clear, colorless, highly flexible, ethyl and octyl cyanoacrylate adhesive liquid for the assembly of flexible medical devices. It allows the use of dissimilar and... [See More]
- Industry: Sanitary
- Cure / Technology: Single Component
- Chemical System: Cyanoacrylate
- Type / Form: Liquid
from Henkel Corporation - Industrial
Fluorescent, UV-cured acrylated urethane acrylic adhesive which is used for bonding plasticized PVC, TPEs and thermostat rubbers. LOCTITE ® AA 3953 is a colorless to straw-colored, transparent, fluorescent, medium viscosity, UV-cured, acrylated urethane acrylic adhesive designed for use where a... [See More]
- Industry: Sanitary
from Henkel Corporation - Industrial
Off-white, 2-part, epoxy adhesive which cures at room temperature to form a tough bondline providing high peel resistance and high shear strengths. LOCTITE ® EA M-21HP is an off-white, 2-part, epoxy adhesive which cures at room temperature once mixed, to form a tough bondline which provides... [See More]
- Industry: Sanitary
- Substrate Compatibility: Ceramic, Glass; Metal; Plastic
- Chemical System: Epoxy