Plastic Filter Elements
from Air Logic
The F920 Inline Filter eliminates contamination in a pneumatic system. The overall size of the filter has been minimized to fit into the smallest design envelope. The filters are precision molded of polysulfone material. The filter media is Dutch weave 316 Stainless Steel screen which is resistant... [See More]
- Housing Material: Plastic
- Configuration: In-line
- Type: WireMesh
- Filtration Grade: 5.00
from FIPA Inc.
Water droplets and other condensates can form in the vacuum generator intake. FIPA condensate separators protect vacuum generators from possible damage by condensing vapours. Optimum protection is achieved by installing the filter directly on the vacuum side. FIPA filters for wet environments are... [See More]
- Housing Material: Plastic
- Maximum Pressure: 106
- Filtration Grade: 30.00 to 100.00
- Maximum Temperature: 252
from Hayward Flow Control
Offered in the revolutionary Platinum GFPP with FPM seals only. Units are Simplex, Duplex, Triplex and Quadplex. True union end connections in sizes 1-1/4 in. to 4 in. Features. Platinum Glass Filled Polypropylene. One-Piece Injection Molded Construction. Hand Removable, Ergonomic Cover with Liquid... [See More]
- Housing Material: Plastic; GFPP
- Configuration: In-line
- Type: Bag
- Flow Rate (Liquids): 100.0
from GENERON
Reliable Nitrogen Membrane Filters are the heart of a nitrogen generation system. GENERON ® membrane filters have been at the forefront of the industry for over 40 years. Our research and development team in California works to continually improve the performance and durability of our membranes. [See More]
- Housing Material: Aluminum; Plastic
- Maximum Pressure: 203
- Type: Cartridge
- Application / Industry: Biopharmaceutical; Electronics; Food or Beverage Processing; Textile, Heat Treatment, Controlled Atmosphere
from General Pump
Plastic Chemical Filter with Check Valve, 1/4"; Hose Barb and 4 Foot Hose. General Pump has a full range of accessories to support our pumps, including custom-designed chemical injectors, trigger guns, nozzles, and control valves. Get optimal performance from your pump with the proper accessories... [See More]
- Housing Material: Plastic
- Port Description: 1/4" Barb and 4 Foot Hose
- Configuration: In-line
- Application / Industry: Pressure Cleaning
from 3M Separation and Purification Sciences Division
The key success factors in the clarification of wine are the membrane selection with regard to fouling behavior and the proper module design for superior filtration performance. 3M offers both to its customers. Accurel ® PP hollow fiber membranes feature a symmetric pore structure and high... [See More]
- Housing Material: Plastic
- Flow: Full Flow
- Type: Cartridge
- Range: Micro Filtration
from ARKPLAS
In-Line Filters are designed for the removal of most visible particulate in aqueous solutions, and gas streams, by means of either a stainless steel filter, or a high-density polyethylene (HDPE) filter. In-Line Filter housings are manufactured in Nylon, Polypropylene, and Clear Polycarbonate... [See More]
- Housing Material: Plastic; Polycarb.
- Flow: Full Flow
- Configuration: In-line
- Filtration Grade: 45.00 to 90.00
from Parker Hannifin Filtration and Separation Div. / Balston Products
bull; Removes liquid aerosols and sub-micron particles. • Liquids gravitate to the bottom of the element and will not re-enter the airstream. • Oil free air for critical applications, such as air gauging and pneumatic instrumentation and controls. • Interchangeable twist and... [See More]
- Housing Material: Plastic
- Filtration Grade: 0.01 to 0.30
- Range: Ultra Filtration; Micro Filtration
- Maximum Pressure: 150
from Forsta Filters Inc.
The 180 Fiberglass Reinforced Plastic (FRP) Series filters offer an ideal solution for corrosion resistance in brackish, brine and seawater filtration applications. All wetted components of the FRP Series self-cleaning filters are constructed from seawater- resistant plastic or other high alloy... [See More]
- Housing Material: Plastic
- Flow: Full Flow
- Type: WireMesh
- Filtration Grade: 5.00 to 4000.00
from Dupont Water Solutions
DOW HYPERSHELL ™ NF245-8038 Elements contain an improved nanofiltration membrane sheet that rejects organics with a molecular weight above 300 amu, while passing monovalent salts. It is designed to withstand rigorous processing applications and conditions, and minimizes dead flow areas and... [See More]
- Housing Material: Plastic
- Range: Reverse Osmosis
- Flow: Full Flow
- Maximum Pressure: 795
from ISC Sales, Inc.
The Big-Bubba filter housings are made of rugged glass-reinforced polypropylene so they will not chip, rust, or dent. And because all wetted surfaces are non-metallic, they are ideal when chemical compatibility is an issue and for sea water applications. Big-Bubba filter have two outlets on opposite... [See More]
- Housing Material: Plastic
- Flow: Full Flow
- Type: Cartridge
- Flow Rate (Liquids): 15.0 to 150.0
from Sartorius Lab Instruments GmbH & Co. KG
Jumbo Star Sartopure GF Plus cartridges are optimised for the filtration of water and other beverages. Jumbo Star Sartoclean SC filter cartridges combine multiple layers of progressively finer glass fibre fleeces. Due to their high absorptive power by glass fibre fleeces, they are the ideal solution... [See More]
- Housing Material: Plastic
- Range: Micro Filtration
- Configuration: In-line
- Filtration Grade: 0.65
from DME Company
Ferrogard ™ Filter removes contaminant. particles smaller than one micron from process. cooling fluids and hydraulic systems. This includes. the smallest and most abrasive particles that are. responsible for the destructive chain reaction of. wear. Injection molds often have small cooling... [See More]
- Housing Material: Plastic
- Flow: Full Flow
- Configuration: In-line
- Maximum Pressure: 150
from Hayward Flow Control
Cartridges are for use with single and multiple cartridge CFLVs (single and double length). Available in multiple micron ratings for high efficiency filtration. Nominal micron ratings available are 1, 5, 10 and 30. Key Features and Benefits. • Multiple Micron Ratings for High Efficiency... [See More]
- Housing Material: Plastic
- Configuration: In-line
- Type: Cartridge; Cartridge
- Filtration Grade: 1.00 to 30.00
from General Pump
Plastic Chemical Filter with Check Valve, Gray. General Pump has a full range of accessories to support our pumps, including custom-designed chemical injectors, trigger guns, nozzles, and control valves. Get optimal performance from your pump with the proper accessories for your application. [See More]
- Housing Material: Plastic
- Application / Industry: Pressure Cleaning
- Configuration: In-line
- Filtration Product: Chemical
from 3M Separation and Purification Sciences Division
Economy and Reliability in Ultrafiltration!. As an alternative to conventional treatment steps, such as flocculation, sedimentation and multi media filtration, Liqui-Flux ultrafiltration modules reliably help remove turbidity, suspended solids, and pathogens such as bacteria and protozoae from a raw... [See More]
- Housing Material: Plastic; PVC
- Flow: Full Flow
- Type: Cartridge
- Range: Ultra Filtration
from ARKPLAS
In-Line Filters are designed for the removal of most visible particulate in aqueous solutions, and gas streams, by means of either a stainless steel filter, or a high-density polyethylene (HDPE) filter. In-Line Filter housings are manufactured in Nylon, Polypropylene, and Clear Polycarbonate... [See More]
- Housing Material: Plastic; Nylon
- Flow: Full Flow
- Configuration: In-line
- Filtration Grade: 45.00 to 90.00
from Parker Hannifin Filtration and Separation Div. / Balston Products
Balston Gas and Liquid Sample Analyzer Filters protect analyzers from sample impurities by removing solids and liquids from gases with 99.999% efficiency at 0.01 micron or lower. Composed of borosilicate glass microfibers with a resin binder, Balston sample filters are inert to most any gas or... [See More]
- Housing Material: Plastic
- Filtration Grade: 0.01 to 0.90
- Range: Micro Filtration
- Maximum Pressure: 125
from DME Company
The RARE EARTH ADVANTAGE. Micromag has numerous advantages:-. • Sub micron filtration efficiency; if the particle is magnetic,. the Micromag will remove it. • No loss of fluid due to changing oil-sodden cartridges. • No pressure drop, even when fully loaded with contamination. due to... [See More]
- Housing Material: Plastic
- Flow: Full Flow
- Configuration: In-line
- Application / Industry: Molding Applications
from General Pump
Plastic Two-Step Chemical Filter, No check Valve, Black. General Pump has a full range of accessories to support our pumps, including custom-designed chemical injectors, trigger guns, nozzles, and control valves. Get optimal performance from your pump with the proper accessories for your... [See More]
- Housing Material: Plastic
- Application / Industry: Pressure Cleaning
- Configuration: In-line
- Filtration Product: Chemical
from ARKPLAS
In-Line Filters are designed for the removal of most visible particulate in aqueous solutions, and gas streams, by means of either a stainless steel filter, or a high-density polyethylene (HDPE) filter. In-Line Filter housings are manufactured in Nylon, Polypropylene, and Clear Polycarbonate... [See More]
- Housing Material: Plastic; PP
- Flow: Full Flow
- Configuration: In-line
- Filtration Grade: 45.00 to 90.00
from Parker Hannifin Filtration and Separation Div. / Balston Products
Balston Gas and Liquid Sample Analyzer Filters protect analyzers from sample impurities by removing solids and liquids from gases with 99.999% efficiency at 0.01 micron or lower. Composed of borosilicate glass microfibers with a resin binder, Balston sample filters are inert to most any gas or... [See More]
- Housing Material: Plastic
- Maximum Pressure: 125
- Filtration Grade: 0.01 to 2.00
- Maximum Temperature: 230
from General Pump
Plastic Chemical Filter, 1/4"; Hose Barb. General Pump has a full range of accessories to support our pumps, including custom-designed chemical injectors, trigger guns, nozzles, and control valves. Get optimal performance from your pump with the proper accessories for your application. [See More]
- Housing Material: Plastic
- Port Description: 1/4" Barb
- Configuration: In-line
- Application / Industry: Pressure Cleaning
from ARKPLAS
In-Line Filters are designed for the removal of most visible particulate in aqueous solutions, and gas streams, by means of either a stainless steel filter, or a high-density polyethylene (HDPE) filter. In-Line Filter housings are manufactured in Nylon, Polypropylene, and Clear Polycarbonate... [See More]
- Housing Material: Plastic; Polycarb.
- Flow: Full Flow
- Configuration: In-line
- Filtration Grade: 90.00 to 130.00
from Parker Hannifin Filtration and Separation Div. / Balston Products
This opaque PVDF DFU, with approximately double the membrane area of the 9933-05-95, is used where exceptional chemical compatibility is required. [See More]
- Housing Material: Plastic; PVDF
- Range: Ultra Filtration
- Configuration: In-line
- Maximum Pressure: 125
from General Pump
Plastic Chemical Filter with Check Valve, 1/4"; Hose Barb. General Pump has a full range of accessories to support our pumps, including custom-designed chemical injectors, trigger guns, nozzles, and control valves. Get optimal performance from your pump with the proper accessories for your... [See More]
- Housing Material: Plastic
- Port Description: 1/4" Barb
- Configuration: In-line
- Application / Industry: Pressure Cleaning
from ARKPLAS
In-Line Filters are designed for the removal of most visible particulate in aqueous solutions, and gas streams, by means of either a stainless steel filter, or a high-density polyethylene (HDPE) filter. In-Line Filter housings are manufactured in Nylon, Polypropylene, and Clear Polycarbonate... [See More]
- Housing Material: Plastic; Nylon
- Flow: Full Flow
- Configuration: In-line
- Filtration Grade: 90.00 to 130.00
from Parker Hannifin Filtration and Separation Div. / Balston Products
Available in a transparent nylon housing, this DFU is an ideal choice for an economical membrane filter for use where its chemical compatibility is suitable. [See More]
- Housing Material: Plastic; Nylon
- Range: Ultra Filtration
- Configuration: In-line
- Maximum Pressure: 125
from General Pump
Clear Bowl Filters, available with 50 or 80 mesh screens. Easy to disassemble and assemble for cleaning and made with durable long lasting materials. Keeps debris out of pump. Clear plastic bowl makes it easy to see when cleaning is required. 50 mesh, stainless steel mesh screen is standard. 80... [See More]
- Housing Material: Plastic; Steel - Stainless
- Configuration: In-line
- Type: WireMesh
- Maximum Pressure: 150
from ARKPLAS
In-Line Filters are designed for the removal of most visible particulate in aqueous solutions, and gas streams, by means of either a stainless steel filter, or a high-density polyethylene (HDPE) filter. In-Line Filter housings are manufactured in Nylon, Polypropylene, and Clear Polycarbonate... [See More]
- Housing Material: Plastic; PP
- Flow: Full Flow
- Configuration: In-line
- Filtration Grade: 90.00 to 130.00
from Parker Hannifin Filtration and Separation Div. / Balston Products
These models are used for pump flow rate of 3-20 CFM. The recommended filter is based upon the flow capacity equal to or less than the rated flow of the vacuum pump. The filter assemblies are shipped with filter cartridges and final filter pad. [See More]
- Housing Material: Plastic; Nylon
- Maximum Pressure: 15
- Type: Cartridge
- Maximum Temperature: 250
from General Pump
Clear Bowl Filter, 50 Mesh Screen. Keeps debris out of pump. Clear plastic bowl makes it easy to see when cleaning is required. 50 mesh, stainless steel mesh screen is standard. 80 mesh, stainless steel mesh screen is optional. Easy to install. Easy to disassemble and assemble for cleaning. Made... [See More]
- Housing Material: Plastic; Steel - Stainless
- Configuration: In-line
- Type: WireMesh
- Maximum Pressure: 150
from ARKPLAS
In-Line Filters are designed for the removal of most visible particulate in aqueous solutions, and gas streams, by means of either a stainless steel filter, or a high-density polyethylene (HDPE) filter. In-Line Filter housings are manufactured in Nylon, Polypropylene, and Clear Polycarbonate... [See More]
- Housing Material: Plastic; Polycarb.
- Configuration: In-line
- Type: WireMesh
- Flow: Full Flow
from General Pump
Inlet Filter, Integrated Garden Hose Nut. Strongest see-through filter on the market. Load bearing brass spine. Integrated garden hose connector. Flow through design. Clear Plastic Cover. Available with and without bypass ports. For general purpose pressure wash use. General Pump has a full range of... [See More]
- Housing Material: Plastic; Brass
- Flow Rate (Liquids): 8.0
- Configuration: In-line
- Maximum Pressure: 150
from ARKPLAS
In-Line Filters are designed for the removal of most visible particulate in aqueous solutions, and gas streams, by means of either a stainless steel filter, or a high-density polyethylene (HDPE) filter. In-Line Filter housings are manufactured in Nylon, Polypropylene, and Clear Polycarbonate... [See More]
- Housing Material: Plastic; Nylon
- Configuration: In-line
- Type: WireMesh
- Flow: Full Flow
from General Pump
Inlet Filter, Integrated Garden Hose. Strongest see-through filter on the market. Load bearing brass spine. Integrated garden hose connector. Flow through design. Clear Plastic Cover. Available with and without bypass ports. For general purpose pressure wash use. General Pump has a full range of... [See More]
- Housing Material: Plastic; Brass
- Flow Rate (Liquids): 8.0
- Configuration: In-line
- Maximum Pressure: 150
from ARKPLAS
In-Line Filters are designed for the removal of most visible particulate in aqueous solutions, and gas streams, by means of either a stainless steel filter, or a high-density polyethylene (HDPE) filter. In-Line Filter housings are manufactured in Nylon, Polypropylene, and Clear Polycarbonate... [See More]
- Housing Material: Plastic; PP
- Configuration: In-line
- Type: WireMesh
- Flow: Full Flow
from General Pump
Industrial Filter, Plastic. General Pump has a full range of accessories to support our pumps, including custom-designed chemical injectors, trigger guns, nozzles, and control valves. Get optimal performance from your pump with the proper accessories for your application. [See More]
- Housing Material: Plastic
- Filtration Grade: 297.00
- Configuration: In-line
- Flow Rate (Liquids): 55.0
from ARKPLAS
In-Line Filters are designed for the removal of most visible particulate in aqueous solutions, and gas streams, by means of either a stainless steel filter, or a high-density polyethylene (HDPE) filter. In-Line Filter housings are manufactured in Nylon, Polypropylene, and Clear Polycarbonate... [See More]
- Housing Material: Plastic; Polycarb.
- Configuration: In-line
- Type: WireMesh
- Flow: Full Flow
from General Pump
Industrial Filter, Plastic. General Pump has a full range of accessories to support our pumps, including custom-designed chemical injectors, trigger guns, nozzles, and control valves. Get optimal performance from your pump with the proper accessories for your application. [See More]
- Housing Material: Plastic
- Filtration Grade: 297.00
- Configuration: In-line
- Flow Rate (Liquids): 125.0
from ARKPLAS
In-Line Filters are designed for the removal of most visible particulate in aqueous solutions, and gas streams, by means of either a stainless steel filter, or a high-density polyethylene (HDPE) filter. In-Line Filter housings are manufactured in Nylon, Polypropylene, and Clear Polycarbonate... [See More]
- Housing Material: Plastic; Nylon
- Configuration: In-line
- Type: WireMesh
- Flow: Full Flow
from General Pump
Industrial Filter, Plastic. General Pump has a full range of accessories to support our pumps, including custom-designed chemical injectors, trigger guns, nozzles, and control valves. Get optimal performance from your pump with the proper accessories for your application. [See More]
- Housing Material: Plastic
- Filtration Grade: 297.00
- Configuration: In-line
- Flow Rate (Liquids): 53.0
from ARKPLAS
In-Line Filters are designed for the removal of most visible particulate in aqueous solutions, and gas streams, by means of either a stainless steel filter, or a high-density polyethylene (HDPE) filter. In-Line Filter housings are manufactured in Nylon, Polypropylene, and Clear Polycarbonate... [See More]
- Housing Material: Plastic; PP
- Configuration: In-line
- Type: WireMesh
- Flow: Full Flow
from General Pump
Industrial Filter, Plastic. General Pump has a full range of accessories to support our pumps, including custom-designed chemical injectors, trigger guns, nozzles, and control valves. Get optimal performance from your pump with the proper accessories for your application. [See More]
- Housing Material: Plastic
- Filtration Grade: 297.00
- Configuration: In-line
- Flow Rate (Liquids): 120.0
from ARKPLAS
In-Line Filters are designed for the removal of most visible particulate in aqueous solutions, and gas streams, by means of either a stainless steel filter, or a high-density polyethylene (HDPE) filter. In-Line Filter housings are manufactured in Nylon, Polypropylene, and Clear Polycarbonate... [See More]
- Housing Material: Plastic; Polycarb.
- Flow: Full Flow
- Configuration: In-line
- Filtration Grade: 45.00 to 90.00
from General Pump
Plastic Chemical Filter with Brass, 1/4"; Hose Barb. Features rigid construction, plastic housing and mesh filter, brass house, barb fitting. No tool required for cleaning. Available with or without stainless steel check. General Pump has a full range of accessories to support our pumps, including... [See More]
- Housing Material: Plastic; Brass
- Configuration: In-line
- Type: WireMesh
- Port Description: 1/4" Barb
from ARKPLAS
In-Line Filters are designed for the removal of most visible particulate in aqueous solutions, and gas streams, by means of either a stainless steel filter, or a high-density polyethylene (HDPE) filter. In-Line Filter housings are manufactured in Nylon, Polypropylene, and Clear Polycarbonate... [See More]
- Housing Material: Plastic; Nylon
- Flow: Full Flow
- Configuration: In-line
- Filtration Grade: 45.00 to 90.00
from General Pump
Plastic Chemical Filter with Brass Hose Barb with Check, 1/4"; Hose Barb. Features rigid construction, plastic housing and mesh filter, brass house, barb fitting. No tool required for cleaning. Available with or without stainless steel check. General Pump has a full range of accessories to support... [See More]
- Housing Material: Plastic; Brass
- Configuration: In-line
- Type: WireMesh
- Port Description: 1/4" Barb
from ARKPLAS
In-Line Filters are designed for the removal of most visible particulate in aqueous solutions, and gas streams, by means of either a stainless steel filter, or a high-density polyethylene (HDPE) filter. In-Line Filter housings are manufactured in Nylon, Polypropylene, and Clear Polycarbonate... [See More]
- Housing Material: Plastic; PP
- Flow: Full Flow
- Configuration: In-line
- Filtration Grade: 45.00 to 90.00
from ARKPLAS
In-Line Filters are designed for the removal of most visible particulate in aqueous solutions, and gas streams, by means of either a stainless steel filter, or a high-density polyethylene (HDPE) filter. In-Line Filter housings are manufactured in Nylon, Polypropylene, and Clear Polycarbonate... [See More]
- Housing Material: Plastic; Polycarb.
- Flow: Full Flow
- Configuration: In-line
- Filtration Grade: 90.00 to 130.00
from ARKPLAS
In-Line Filters are designed for the removal of most visible particulate in aqueous solutions, and gas streams, by means of either a stainless steel filter, or a high-density polyethylene (HDPE) filter. In-Line Filter housings are manufactured in Nylon, Polypropylene, and Clear Polycarbonate... [See More]
- Housing Material: Plastic; Nylon
- Flow: Full Flow
- Configuration: In-line
- Filtration Grade: 90.00 to 130.00
from ARKPLAS
In-Line Filters are designed for the removal of most visible particulate in aqueous solutions, and gas streams, by means of either a stainless steel filter, or a high-density polyethylene (HDPE) filter. In-Line Filter housings are manufactured in Nylon, Polypropylene, and Clear Polycarbonate... [See More]
- Housing Material: Plastic; PP
- Flow: Full Flow
- Configuration: In-line
- Filtration Grade: 90.00 to 130.00
from ARKPLAS
In-Line Filters are designed for the removal of most visible particulate in aqueous solutions, and gas streams, by means of either a stainless steel filter, or a high-density polyethylene (HDPE) filter. In-Line Filter housings are manufactured in Nylon, Polypropylene, and Clear Polycarbonate... [See More]
- Housing Material: Plastic; Polycarb.
- Configuration: In-line
- Type: WireMesh
- Flow: Full Flow
from ARKPLAS
In-Line Filters are designed for the removal of most visible particulate in aqueous solutions, and gas streams, by means of either a stainless steel filter, or a high-density polyethylene (HDPE) filter. In-Line Filter housings are manufactured in Nylon, Polypropylene, and Clear Polycarbonate... [See More]
- Housing Material: Plastic; Nylon
- Configuration: In-line
- Type: WireMesh
- Flow: Full Flow
from ARKPLAS
In-Line Filters are designed for the removal of most visible particulate in aqueous solutions, and gas streams, by means of either a stainless steel filter, or a high-density polyethylene (HDPE) filter. In-Line Filter housings are manufactured in Nylon, Polypropylene, and Clear Polycarbonate... [See More]
- Housing Material: Plastic; PP
- Configuration: In-line
- Type: WireMesh
- Flow: Full Flow
from ARKPLAS
In-Line Filters are designed for the removal of most visible particulate in aqueous solutions, and gas streams, by means of either a stainless steel filter, or a high-density polyethylene (HDPE) filter. In-Line Filter housings are manufactured in Nylon, Polypropylene, and Clear Polycarbonate... [See More]
- Housing Material: Plastic; Polycarb.
- Configuration: In-line
- Type: WireMesh
- Flow: Full Flow
from ARKPLAS
In-Line Filters are designed for the removal of most visible particulate in aqueous solutions, and gas streams, by means of either a stainless steel filter, or a high-density polyethylene (HDPE) filter. In-Line Filter housings are manufactured in Nylon, Polypropylene, and Clear Polycarbonate... [See More]
- Housing Material: Plastic; Nylon
- Configuration: In-line
- Type: WireMesh
- Flow: Full Flow
from ARKPLAS
In-Line Filters are designed for the removal of most visible particulate in aqueous solutions, and gas streams, by means of either a stainless steel filter, or a high-density polyethylene (HDPE) filter. In-Line Filter housings are manufactured in Nylon, Polypropylene, and Clear Polycarbonate... [See More]
- Housing Material: Plastic; PP
- Configuration: In-line
- Type: WireMesh
- Flow: Full Flow
from ARKPLAS
In-Line Filters are designed for the removal of most visible particulate in aqueous solutions, and gas streams, by means of either a stainless steel filter, or a high-density polyethylene (HDPE) filter. In-Line Filter housings are manufactured in Nylon, Polypropylene, and Clear Polycarbonate... [See More]
- Housing Material: Plastic; Polycarb.
- Flow: Full Flow
- Configuration: In-line
- Filtration Grade: 45.00 to 90.00