Wire Mesh / Screen Filter Elements
from Dexmet® Corporation, a part of PPG’s engineered materials division
Filtration and separation are key criteria for industries that produce semiconductors, process chemicals, and pharmaceuticals, or systems that control gas or liquids. Dexmet custom manufactures MicroGrid ® and PFOA-free PolyGrid ® materials in a multitude of open area configurations with... [See More]
- Type: WireMesh
- Filtration Product: Chemical
- Application / Industry: Semiconductor; chemicals, and pharmaceuticals
- Filter Medium Material: Metal Fiber (optional feature); Nylon (optional feature); PTFE (optional feature); Polysulfone (optional feature); PTFE (PFOA-free), PEEK, Nylons
from Thermon, Inc
The Thermon EnviroDyne ™ MDU is a safe, highly efficient, and easy to install methane abatement solution for use in the reduction of fugitive gas emissions. The reduction of methane emissions is crucial and has become a global concern. Methane is the main component of natural gas and a... [See More]
- Type: WireMesh
- Filtration Product: Methane
from Kaydon Filtration Corporation
Our Diesel Particulate Elements provide critical protection in bulk diesel storage and transfer systems by removing abrasive solid contaminants that cause injector wear and fuel system damage. With high-efficiency micro glass media, these filters support cleaner combustion, reduced engine downtime,... [See More]
- Type: Cartridge; WireMesh; Micro glass Media
- Filter Medium Material: Glass Fiber; Metal Fiber
- Filtration Product: GasolineDiesel
from Hilliard Corporation (The)
The Pleated Screen Cartridge is a cleanable element with outside in flow. It is a direct replacement for a PL718 cartridge when cartridge disposal is a problem. Available in 10, 25, 40, 60, 74 and 104 micron absolute screen meshes, this cartridge survives in fluids and conditions where standard PL... [See More]
- Type: WireMesh
- Filtration Grade: 25.00 to 104.00
- Configuration: In-line
- Flow Rate (Liquids): 25.0 to 60.0
from Kaydon Filtration Corporation
Kaymax® elements are designed for critical lubricating oil applications where high-efficiency particulate removal and long service life are essential. Constructed with bonded fixed-pore microfiberglass media, these elements maintain pleat integrity under high viscosity and flow conditions-delivering... [See More]
- Type: Cartridge; WireMesh
- Filter Medium Material: Glass Fiber; Metal Fiber
- Filtration Product: Lubricants; HydraulicFluid
from Hosco Finishing System Components
Stainless Steel Final Filter for All Spray Guns. Easy installation. Eliminates prefilter. Small internal volume (reducing purge time and paint loss). Lightweight. 70 - 500 mesh high capacity filter cartridge, replaceable. Low cost [See More]
- Type: Cartridge; WireMesh; 40 Mesh
- Filtration Grade: 350.00
- Range: Micro Filtration
- Application / Industry: Spray Guns
from ARKPLAS
In-Line Filters are designed for the removal of most visible particulate in aqueous solutions, and gas streams, by means of either a stainless steel filter, or a high-density polyethylene (HDPE) filter. In-Line Filter housings are manufactured in Nylon, Polypropylene, and Clear Polycarbonate... [See More]
- Type: WireMesh
- Flow: Full Flow
- Configuration: In-line
- Filtration Grade: 100.00
from GE ENERGY Air Filtration
The TS1000 delivers good all round coalescing performance with low pressure drop, low maintenance and very long service life. Constructed with 100% synthetic high performance woven mesh, GE ’s TS1000 coalescer is designed to operate in the harshest conditions such as coastal desert environment... [See More]
- Type: WireMesh
- Filter Medium Material: Synthetic Fiber
- Filtration Product: Moisture
from General Pump
Clear Bowl Filters, available with 50 or 80 mesh screens. Easy to disassemble and assemble for cleaning and made with durable long lasting materials. Keeps debris out of pump. Clear plastic bowl makes it easy to see when cleaning is required. 50 mesh, stainless steel mesh screen is standard. 80... [See More]
- Type: WireMesh
- Maximum Pressure: 150
- Configuration: In-line
- Port Description: 1/2" NPT-F x 1/2" NPT-F
from Shelco Filters - Division of Tinny Corp.
Stainless Steel Filter Cartridges for Extreme High Temperature Applications. 304L or 316L stainless steel filter media with welded cartridge construction for highest mechanical strength. Available in a cylindrical or pleated filter configuration for longer life and greater dirt holding capacity. [See More]
- Type: Cartridge; WireMesh
- Application / Industry: Waste Water; High Temp, High Differential Pressures, Viscous, Corrosive Liquids and Gases
- Filtration Grade: 2.00 to 840.00
- Filtration Product: Water; Caustic Fluids, Plating Solutions, Straining, Photo Solutions, Magnetic Coatings; Chemical; GasolineDiesel; HydraulicFluid
from Air Logic
The F920 Inline Filter eliminates contamination in a pneumatic system. The overall size of the filter has been minimized to fit into the smallest design envelope. The filters are precision molded of polysulfone material. The filter media is Dutch weave 316 Stainless Steel screen which is resistant... [See More]
- Type: WireMesh
- Filtration Grade: 5.00
- Configuration: In-line
- Maximum Pressure: 10 to 30
from G. Bopp USA Inc.
In contrast to POREMET, ABSOLTA N is a highly porous filter medium for higher flow rates with moderate pressure loads. ABSOLTA is characterized by the best cleaning and backwash properties. ABSOLTA D is also a 5-layer version with a reduced thickness of 1.7 millimeters. [See More]
- Type: WireMesh
- Additional Features: Reusable
from Forsta Filters Inc.
The 180 Series offers a unique configuration of automatic self-cleaning water filters.180 Series self cleaning water filters have a parallel flange configuration to accommodate simple installation. The 180 Series automatic water filter will integrate with any straight pipeline.180 Series industrial... [See More]
- Type: WireMesh
- Filtration Grade: 5.00 to 4000.00
- Flow: Full Flow
- Flow Rate (Liquids): 200.0
from Western Integrated Technologies
WIT employs filtration experts that can help you find the filter that's right for your needs. WIT can cross many non-Parker filter part numbers over to form/fit/function Parker filter replacements. Thanks to our Parker filter build program, we stock many filtration options. [See More]
- Type: WireMesh
- Maximum Pressure: 7000
- Flow: Full Flow
- Maximum Temperature: 250
from Rosedale Products, Inc.
Single layer microfiber material, excellent for polishing applications [See More]
- Type: WireMesh
- Element Size: 7.0625" Diameter x 11.125" Long
- Maximum Temperature: 225
- Filtration Product: Lubricants; Water; Oil; Chemical
from Bijur Delimon International
Application. FR20 Reversing Valves operate in conjunction with two pressure switches, alternating lubricant flow through DC41 end-of-line systems so that lubricant is directed first to one set of Dualine valve inlet ports and then the other, on succeeding system cycles. Features. Each coil has a... [See More]
- Type: WireMesh
- Flow: Full Flow
- Configuration: In-line
- Range: Micro Filtration
from Eaton
Series HPP high pressure filters have a top manifold. They are suitable for a working pressure up to 4,568 PSI. The HPP-filters are suitable for a maximum flow rate of 180 gallons per minute. They are flanged to the mounting-surface. Bypass and reversing valves are available. HPP 60-450. Operating... [See More]
- Type: WireMesh
- Maximum Pressure: 2320 to 4568
- Flow Rate (Liquids): 357.0
- Maximum Temperature: 176
from ProVent LLC
Filter Cartridges & Bags. Impingers & Mist Eliminator Filtration Packs. Metal Mesh Pre-Filters. Diaphragm Valves & Repair Kits. Pulse Jet Timer/Controller Boards. Solenoid/Pilot Valves. Motors, Sheaves, Bushings. Belts, Gasketing, Air Tubing. Photohelic Gauges & Relays. Magnahelic... [See More]
- Type: Cartridge; WireMesh
- Filter Medium Material: Polyester (optional feature); Polypropylene (optional feature); PTFE (optional feature)
- Application / Industry: Hydrocarbon
from ARKPLAS
In-Line Filters are designed for the removal of most visible particulate in aqueous solutions, and gas streams, by means of either a stainless steel filter, or a high-density polyethylene (HDPE) filter. In-Line Filter housings are manufactured in Nylon, Polypropylene, and Clear Polycarbonate... [See More]
- Type: WireMesh
- Flow: Full Flow
- Configuration: In-line
- Filtration Grade: 100.00
from General Pump
Clear Bowl Filter, 50 Mesh Screen. Keeps debris out of pump. Clear plastic bowl makes it easy to see when cleaning is required. 50 mesh, stainless steel mesh screen is standard. 80 mesh, stainless steel mesh screen is optional. Easy to install. Easy to disassemble and assemble for cleaning. Made... [See More]
- Type: WireMesh
- Maximum Pressure: 150
- Configuration: In-line
- Port Description: 1" NPT-F x 1" NPT-F
from G. Bopp USA Inc.
POREFLO is a two- to three-layer laminate made of staggered layered weft fabrics. The subsequent surface compaction changes the laminate into an air-permeable metallic membrane with high stability and low porosity. POREFLO is particularly suitable for applications where high flow resistance is... [See More]
- Type: WireMesh
- Additional Features: Reusable
from Forsta Filters Inc.
The 180 Fiberglass Reinforced Plastic (FRP) Series filters offer an ideal solution for corrosion resistance in brackish, brine and seawater filtration applications. All wetted components of the FRP Series self-cleaning filters are constructed from seawater- resistant plastic or other high alloy... [See More]
- Type: WireMesh
- Filtration Grade: 5.00 to 4000.00
- Flow: Full Flow
- Flow Rate (Liquids): 200.0
from Bijur Delimon International
Application. In-line Pressure Filters provide a compact lightweight in-line filter for reliable economic protection of critical components. These In-line pressure filters are commonly used in air-oil panel assemblies. Assemblies are specially designed for easy in-line installations. They can be used... [See More]
- Type: WireMesh
- Flow: Full Flow
- Configuration: In-line
- Range: Micro Filtration
from Eaton
Series MNU medium pressure filters can handle a maximum pressure of 2,320 PSI and a maximum flow rate of 106 gallons per minute. Pressure filters of the series MNU are equipped with filter elements according to DIN 24550, T3. The pressure peaks are absorbed by a sufficient margin of safety. The... [See More]
- Type: WireMesh
- Maximum Pressure: 2320 to 4568
- Flow Rate (Liquids): 357.0
- Maximum Temperature: 176
from ARKPLAS
In-Line Filters are designed for the removal of most visible particulate in aqueous solutions, and gas streams, by means of either a stainless steel filter, or a high-density polyethylene (HDPE) filter. In-Line Filter housings are manufactured in Nylon, Polypropylene, and Clear Polycarbonate... [See More]
- Type: WireMesh
- Flow: Full Flow
- Configuration: In-line
- Filtration Grade: 100.00
from General Pump
Inlet Suction Tank Filter, 3/8";-NPT-F, 40 Mesh, S304. General Pump has a full range of accessories to support our pumps, including custom-designed chemical injectors, trigger guns, nozzles, and control valves. Get optimal performance from your pump with the proper accessories for your application. [See More]
- Type: WireMesh
- Port Description: 3/8?-NPT-F
- Configuration: In-line
- Application / Industry: Pressure Cleaning
from G. Bopp USA Inc.
The sheet-like filter medium consists of five different layers of fabric that are coordinated with one another in such a way that an optimal combination of strength, filtration fineness, flow rate and backwashing properties is achieved. POREMET is ideal for fine and ultra-fine filtration under high... [See More]
- Type: WireMesh
- Additional Features: Reusable
from Forsta Filters Inc.
The 90 Series offers a unique configuration of self-cleaning irrigation and industrial water filters.90 Series self cleaning water filters have a right angle flange configuration that provides a compact filter unit. A 90 Series automatic water filter is much smaller than its 180 Series counterpart,... [See More]
- Type: WireMesh
- Filtration Grade: 5.00 to 4000.00
- Flow: Full Flow
- Flow Rate (Liquids): 75.0
from Bijur Delimon International
Application. In-line Pressure Filters provide a compact lightweight in-line filter for reliable economic protection of critical components. These In-line pressure filters are commonly used in air-oil panel assemblies. Assemblies are specially designed for easy in-line installations. They can be used... [See More]
- Type: WireMesh
- Flow: Full Flow
- Configuration: In-line
- Range: Micro Filtration
from Eaton
Duplex low pressure filters series DA are suitable for operating pressure up to 580 PSI. Pressure peaks can be absorbed with a sufficient margin of safety. Change-over ball valve which, integrated in the middle of the housing, makes it possible to switch from the dirty filter -side to the clean... [See More]
- Type: WireMesh
- Maximum Pressure: 580
- Flow Rate (Liquids): 528.0
- Maximum Temperature: 176
from ARKPLAS
In-Line Filters are designed for the removal of most visible particulate in aqueous solutions, and gas streams, by means of either a stainless steel filter, or a high-density polyethylene (HDPE) filter. In-Line Filter housings are manufactured in Nylon, Polypropylene, and Clear Polycarbonate... [See More]
- Type: WireMesh
- Flow: Full Flow
- Configuration: In-line
- Filtration Grade: 200.00
from General Pump
Inline High-pressure Filter, 100 Mesh Screen, 303 SS w/Brass Outlet. General Pump has a full range of accessories to support our pumps, including custom-designed chemical injectors, trigger guns, nozzles, and control valves. Get optimal performance from your pump with the proper accessories for your... [See More]
- Type: WireMesh
- Flow Rate (Liquids): 8.0
- Configuration: In-line
- Maximum Pressure: 5500
from G. Bopp USA Inc.
TOPMESH 2 was developed to compensate for the low inherent rigidity of fine filter fabrics. The combination of a filter fabric with a support layer made of square mesh fabric ensures stabilization at medium pressure loads and optimal backwashing properties. The low number of layers enables low... [See More]
- Type: WireMesh
- Additional Features: Reusable
from Forsta Filters Inc.
The Low Pressure Series automatic water filters utilize an electric motor to assist cleaning during the backwash cycle.Low Pressure models make self-cleaning filtration possible at lower pressures. They are necessary where the minimum 35 psi system pressure is not available. Motor Run filters... [See More]
- Type: WireMesh
- Filtration Grade: 20.00 to 4000.00
- Flow: Full Flow
- Flow Rate (Liquids): 300.0
from Eaton
Pressure filters, change-over series DU are suitable for operating pressure up to 464 PSI. Pressure peaks can be absorbed with a sufficient margin of safety. A three-way-change-over valve which is, integrated in the middle of the housing, makes it possible to switch from the dirty filter-side to the... [See More]
- Type: WireMesh
- Maximum Pressure: 464
- Flow Rate (Liquids): 1056.0
- Maximum Temperature: 176
from ARKPLAS
In-Line Filters are designed for the removal of most visible particulate in aqueous solutions, and gas streams, by means of either a stainless steel filter, or a high-density polyethylene (HDPE) filter. In-Line Filter housings are manufactured in Nylon, Polypropylene, and Clear Polycarbonate... [See More]
- Type: WireMesh
- Flow: Full Flow
- Configuration: In-line
- Filtration Grade: 200.00
from General Pump
Inline High-pressure Filter, 200 Mesh Screen, Brass. General Pump has a full range of accessories to support our pumps, including custom-designed chemical injectors, trigger guns, nozzles, and control valves. Get optimal performance from your pump with the proper accessories for your application. [See More]
- Type: WireMesh
- Flow Rate (Liquids): 8.0
- Configuration: In-line
- Maximum Pressure: 5000
from G. Bopp USA Inc.
Compared to the TOPMESH 2, the laminate has an additional connection layer between the filter fabric and the support layer made of square mesh. With practically constant flow resistance and good backwashing capacity, higher pressure loads can be handled. TOPMESH 3 is also very suitable for use in... [See More]
- Type: WireMesh
- Additional Features: Reusable
from Forsta Filters Inc.
The Zero Series offers a unique configuration of automatic self-cleaning water filters.Zero Series automatic water filters have a straight flange configuration to accommodate simple installation. The Zero Series filter will integrate with any straight pipeline.Zero Series irrigation and industrial... [See More]
- Type: WireMesh
- Filtration Grade: 5.00 to 4000.00
- Flow: Full Flow
- Flow Rate (Liquids): 200.0
from Eaton
Stainless steel duplex low pressure filters series EDA are suitable for operating pressure up to 580 PSI. Pressure peaks can be absorbed with a sufficient margin of safety. Change-over ball valve which, integrated in the middle of the housing, makes it possible to switch from the dirty filter -side... [See More]
- Type: WireMesh
- Maximum Temperature: 176
- Maximum Pressure: 4568
- Port Description: SAE-flange Connection 3000 PSI
from ARKPLAS
In-Line Filters are designed for the removal of most visible particulate in aqueous solutions, and gas streams, by means of either a stainless steel filter, or a high-density polyethylene (HDPE) filter. In-Line Filter housings are manufactured in Nylon, Polypropylene, and Clear Polycarbonate... [See More]
- Type: WireMesh
- Flow: Full Flow
- Configuration: In-line
- Filtration Grade: 200.00
from General Pump
Inline High-pressure Filter, 100 Mesh Screen, Brass. General Pump has a full range of accessories to support our pumps, including custom-designed chemical injectors, trigger guns, nozzles, and control valves. Get optimal performance from your pump with the proper accessories for your application. [See More]
- Type: WireMesh
- Flow Rate (Liquids): 8.0
- Configuration: In-line
- Maximum Pressure: 5000
from G. Bopp USA Inc.
Betamesh-PLUS is the latest and most notable developmental step for our successful Betamesh series. The range includes specifications down to single digit microns, maintaining exceptional flow rates. Filtration takes place on the surface of the mesh, ensuring optimal backwashing properties. Both... [See More]
- Type: WireMesh
- Additional Features: Reusable
from Eaton
Eaton&rsquo,s low pressure filters are suitable for a working pressure up to 464 PSI. Pressure filters are used to protect downstream components from contamination levels beyond the recommended cleanliness target. Series LF can be used as suction filters, pressure filters and return-line filters. [See More]
- Type: WireMesh
- Maximum Pressure: 464
- Flow Rate (Liquids): 2642.0
- Maximum Temperature: 176
from ARKPLAS
In-Line Filters are designed for the removal of most visible particulate in aqueous solutions, and gas streams, by means of either a stainless steel filter, or a high-density polyethylene (HDPE) filter. In-Line Filter housings are manufactured in Nylon, Polypropylene, and Clear Polycarbonate... [See More]
- Type: WireMesh
- Flow: Full Flow
- Configuration: In-line
- Filtration Grade: 100.00
from General Pump
Plastic Chemical Filter with Brass, 1/4"; Hose Barb. Features rigid construction, plastic housing and mesh filter, brass house, barb fitting. No tool required for cleaning. Available with or without stainless steel check. General Pump has a full range of accessories to support our pumps, including... [See More]
- Type: WireMesh
- Port Description: 1/4" Barb
- Configuration: In-line
- Application / Industry: Pressure Cleaning
from G. Bopp USA Inc.
Duplex fabrics have a high flow rate and withstand increased mechanical loads. Duplex fabrics are popular for applications as pressure and vacuum filters as well as for filter cartridges. [See More]
- Type: WireMesh
- Additional Features: Reusable
from Eaton
Return-line filters series RF are externally mounted and are designated for connection in return pipes. The Series RF filters can handle a maximum flow rate of 50 gallons per minute. They feature visual/electrical DP indicators. The feed pressure at &bdquo,IN&ldquo, can be pressurized to 145 PSI. [See More]
- Type: WireMesh
- Maximum Pressure: 725
- Flow Rate (Liquids): 1902.0
- Maximum Temperature: 176
from ARKPLAS
In-Line Filters are designed for the removal of most visible particulate in aqueous solutions, and gas streams, by means of either a stainless steel filter, or a high-density polyethylene (HDPE) filter. In-Line Filter housings are manufactured in Nylon, Polypropylene, and Clear Polycarbonate... [See More]
- Type: WireMesh
- Flow: Full Flow
- Configuration: In-line
- Filtration Grade: 100.00
from General Pump
Plastic Chemical Filter with Brass Hose Barb with Check, 1/4"; Hose Barb. Features rigid construction, plastic housing and mesh filter, brass house, barb fitting. No tool required for cleaning. Available with or without stainless steel check. General Pump has a full range of accessories to support... [See More]
- Type: WireMesh
- Port Description: 1/4" Barb
- Configuration: In-line
- Application / Industry: Pressure Cleaning
from G. Bopp USA Inc.
These fabrics have a slightly structured surface and are characterized by very high flow rates and a small pressure drop. They are used for precoat filters and filter cartridges with increased mechanical stress. [See More]
- Type: WireMesh
- Additional Features: Reusable
from Eaton
Hydraulic and lubrication oil filter elements are known as elements with a high intrinsic stability and an excellent filtration capability, a high dirt-retaining capacity and a long service life.These filters are suitable for all petroleum based fluids, HW-emulsions, most synthetic hydraulic fluids... [See More]
- Type: WireMesh
- Maximum Pressure: 2320 to 4568
- Flow Rate (Liquids): 357.0
- Maximum Temperature: 176
from ARKPLAS
In-Line Filters are designed for the removal of most visible particulate in aqueous solutions, and gas streams, by means of either a stainless steel filter, or a high-density polyethylene (HDPE) filter. In-Line Filter housings are manufactured in Nylon, Polypropylene, and Clear Polycarbonate... [See More]
- Type: WireMesh
- Flow: Full Flow
- Configuration: In-line
- Filtration Grade: 100.00
from General Pump
Inlet Filter, Aluminum Body, 50 Mesh. Low-pressure in-line filter. Rigid construction. Stainless Steel mesh filter. Die cast aluminum (anodized) housing and plastic cap. No tools required for cleaning. Ports for bypass hose and gauge. General Pump has a full range of accessories to support our... [See More]
- Type: WireMesh
- Filtration Grade: 350.00
- Configuration: In-line
- Flow Rate (Liquids): 5.8
from G. Bopp USA Inc.
Thanks to its high porosity, this fabric is characterized by very high flow rates. The uniform material cross-section in both thread directions allows the highest mechanical loads. These robust fabrics are used for precoat filters, filter candles, vacuum filters and well filters. [See More]
- Type: WireMesh
- Additional Features: Reusable
from Eaton
The series HPF filter has a front manifold and is suitable for a working pressure up to 4,568 PSI. The pressure filters of the series HPF are suitable for a maximum flow rate of 180 gallons per minute. The HPF-filters are flange mounted to the hydraulic system. They have visual/electrical DP... [See More]
- Type: WireMesh
- Maximum Pressure: 4568
- Flow Rate (Liquids): 357.0
- Maximum Temperature: 176
from ARKPLAS
In-Line Filters are designed for the removal of most visible particulate in aqueous solutions, and gas streams, by means of either a stainless steel filter, or a high-density polyethylene (HDPE) filter. In-Line Filter housings are manufactured in Nylon, Polypropylene, and Clear Polycarbonate... [See More]
- Type: WireMesh
- Flow: Full Flow
- Configuration: In-line
- Filtration Grade: 200.00
from G. Bopp USA Inc.
In contrast to the braid fabrics, the wires in this type are woven at a distance. This results in open meshes through which the fluid flows in a straight line. This type of fabric is characterized by extremely low flow resistance and a particularly good backwashing and cleaning ability. The square... [See More]
- Type: WireMesh
- Additional Features: Reusable
from Eaton
Hydraulic and lubrication oil filter elements are known as elements with a high intrinsic stability and an excellent filtration capability, a high dirt-retaining capacity and a long service life. These filters are suitable for all petroleum based fluids, HW-emulsions, most synthetic hydraulic fluids... [See More]
- Type: WireMesh
- Maximum Pressure: 4568
- Flow Rate (Liquids): 357.0
- Maximum Temperature: 176
from ARKPLAS
In-Line Filters are designed for the removal of most visible particulate in aqueous solutions, and gas streams, by means of either a stainless steel filter, or a high-density polyethylene (HDPE) filter. In-Line Filter housings are manufactured in Nylon, Polypropylene, and Clear Polycarbonate... [See More]
- Type: WireMesh
- Flow: Full Flow
- Configuration: In-line
- Filtration Grade: 200.00
from G. Bopp USA Inc.
The weave of the twill weave results in the smallest filter pores and a smooth fabric surface for monofilaments. The large material cross-section ensures a high level of tissue strength. When flowing through the twill braids, the particles overcome five staggered pore levels. This also reliably... [See More]
- Type: WireMesh
- Additional Features: Reusable
from Eaton
Series HPZ high pressure filters are placed in the pressure feed channel in front of the hydro valve that is to be protected. Pressure filters for sandwich stacking with master gauge for holes according to DIN 24340-A6 are designed for vertical interlink mounting. The filters are available in... [See More]
- Type: WireMesh
- Maximum Pressure: 4568
- Flow Rate (Liquids): 357.0
- Maximum Temperature: 176
from ARKPLAS
In-Line Filters are designed for the removal of most visible particulate in aqueous solutions, and gas streams, by means of either a stainless steel filter, or a high-density polyethylene (HDPE) filter. In-Line Filter housings are manufactured in Nylon, Polypropylene, and Clear Polycarbonate... [See More]
- Type: WireMesh
- Flow: Full Flow
- Configuration: In-line
- Filtration Grade: 200.00
from Eaton
Eaton's Off-Line Filters are partial flow filters for fine filtration of hydraulic and lubrication circuits meant as a supplement to the main filter. Off-line filtration improves the cleanliness and quality of operating fluids and prolongs its durability, thereby preventing early wear and tear of... [See More]
- Type: WireMesh
- Flow Rate (Liquids): 264.0
- Configuration: Off-line
- Maximum Pressure: 232
from ARKPLAS
In-Line Filters are designed for the removal of most visible particulate in aqueous solutions, and gas streams, by means of either a stainless steel filter, or a high-density polyethylene (HDPE) filter. In-Line Filter housings are manufactured in Nylon, Polypropylene, and Clear Polycarbonate... [See More]
- Type: WireMesh
- Flow: Full Flow
- Configuration: In-line
- Filtration Grade: 100.00
from Eaton
Hydraulic and lubrication oil filter elements are known as elements with a high intrinsic stability and an excellent filtration capability, a high dirt-retaining capacity and a long service life. These filters are suitable for all petroleum based fluids, HW-emulsions, most synthetic hydraulic fluids... [See More]
- Type: WireMesh
- Maximum Pressure: 6000
- Flow Rate (Liquids): 119.0
- Maximum Temperature: 176
from ARKPLAS
In-Line Filters are designed for the removal of most visible particulate in aqueous solutions, and gas streams, by means of either a stainless steel filter, or a high-density polyethylene (HDPE) filter. In-Line Filter housings are manufactured in Nylon, Polypropylene, and Clear Polycarbonate... [See More]
- Type: WireMesh
- Flow: Full Flow
- Configuration: In-line
- Filtration Grade: 100.00
from Eaton
The pressure filters of the series ML 170-450 are suitable for a working pressure up to 2320 PSI. The pressure peaks are absorbed by a sufficient margin of safety. The ML-filter is in-line mounted. Series ML filters can handle a maximum flow rate of 60 gallons per minute. They have visual/electrical... [See More]
- Type: WireMesh
- Maximum Pressure: 2320
- Flow Rate (Liquids): 119.0
- Maximum Temperature: 176
from ARKPLAS
In-Line Filters are designed for the removal of most visible particulate in aqueous solutions, and gas streams, by means of either a stainless steel filter, or a high-density polyethylene (HDPE) filter. In-Line Filter housings are manufactured in Nylon, Polypropylene, and Clear Polycarbonate... [See More]
- Type: WireMesh
- Flow: Full Flow
- Configuration: In-line
- Filtration Grade: 100.00
from Eaton
Hydraulic and lubrication oil filter elements are known as elements with a high intrinsic stability and an excellent filtration capability, a high dirt-retaining capacity and a long service life. These filters are suitable for all petroleum based fluids, HW-emulsions, most synthetic hydraulic fluids... [See More]
- Type: WireMesh
- Maximum Pressure: 2320
- Flow Rate (Liquids): 119.0
- Maximum Temperature: 176
from ARKPLAS
In-Line Filters are designed for the removal of most visible particulate in aqueous solutions, and gas streams, by means of either a stainless steel filter, or a high-density polyethylene (HDPE) filter. In-Line Filter housings are manufactured in Nylon, Polypropylene, and Clear Polycarbonate... [See More]
- Type: WireMesh
- Flow: Full Flow
- Configuration: In-line
- Filtration Grade: 200.00
from Eaton
The HP-filter is in-line mounted and bypass and reversing valves are available. They have visual/electrical DP indicators and are made of carbon steel. HP 31. Operating temperature: +14°,F to +176°,F (for a short time +212°,F). Connection system: thread connection. Installation position:... [See More]
- Type: WireMesh
- Maximum Pressure: 6000
- Flow Rate (Liquids): 357.0
- Maximum Temperature: 176
from ARKPLAS
In-Line Filters are designed for the removal of most visible particulate in aqueous solutions, and gas streams, by means of either a stainless steel filter, or a high-density polyethylene (HDPE) filter. In-Line Filter housings are manufactured in Nylon, Polypropylene, and Clear Polycarbonate... [See More]
- Type: WireMesh
- Flow: Full Flow
- Configuration: In-line
- Filtration Grade: 200.00
from Eaton
Hydraulic and lubrication oil filter elements are known as elements with a high intrinsic stability and an excellent filtration capability, a high dirt-retaining capacity and a long service life. These filters are suitable for all petroleum based fluids, HW-emulsions, most synthetic hydraulic fluids... [See More]
- Type: WireMesh
- Maximum Pressure: 2900
- Flow Rate (Liquids): 17.0
- Maximum Temperature: 176
from ARKPLAS
In-Line Filters are designed for the removal of most visible particulate in aqueous solutions, and gas streams, by means of either a stainless steel filter, or a high-density polyethylene (HDPE) filter. In-Line Filter housings are manufactured in Nylon, Polypropylene, and Clear Polycarbonate... [See More]
- Type: WireMesh
- Flow: Full Flow
- Configuration: In-line
- Filtration Grade: 200.00
from Eaton
The innovative, magnetically coupled driving technology that moves the cleaning disc -- without the need for shaft or drive external seals -- makes MCF magnetically coupled filter unique. Dramatically Reduces Product Loss. Highlights of the MCF-824 Series. Permanent media retains valuable product... [See More]
- Type: WireMesh
- Filtration Grade: 15.00 to 1125.00
- Range: Micro Filtration
- Flow Rate (Liquids): 30.0 to 200.0
from ARKPLAS
In-Line Filters are designed for the removal of most visible particulate in aqueous solutions, and gas streams, by means of either a stainless steel filter, or a high-density polyethylene (HDPE) filter. In-Line Filter housings are manufactured in Nylon, Polypropylene, and Clear Polycarbonate... [See More]
- Type: WireMesh
- Flow: Full Flow
- Configuration: In-line
- Filtration Grade: 100.00
from Eaton
Medium pressure duplex filters of the series MDD offer continuous operation. They have a maximum pressure of 2,900 PSI. The MDD series has an optional bypass valve It has visual/electrical DP indicators. MDD 40-63. Operating temperature: +14°,F to +176°,F (for a short time +212°,F). [See More]
- Type: WireMesh
- Maximum Pressure: 4567
- Flow Rate (Liquids): 26.4
- Maximum Temperature: 176
from ARKPLAS
In-Line Filters are designed for the removal of most visible particulate in aqueous solutions, and gas streams, by means of either a stainless steel filter, or a high-density polyethylene (HDPE) filter. In-Line Filter housings are manufactured in Nylon, Polypropylene, and Clear Polycarbonate... [See More]
- Type: WireMesh
- Flow: Full Flow
- Configuration: In-line
- Filtration Grade: 100.00
from Eaton
Spin-on filters typically consist of a head mounted directly in-line with the return piping and a canister containing an element which screws onto a threaded post. The In-line filter series WPL spin-on-filters are suitable for an operating pressure up to 145 psi (10 bar) and are chosen for mounting... [See More]
- Type: WireMesh
- Flow Rate (Liquids): 69.0
- Configuration: In-line
- Maximum Temperature: 230
from ARKPLAS
In-Line Filters are designed for the removal of most visible particulate in aqueous solutions, and gas streams, by means of either a stainless steel filter, or a high-density polyethylene (HDPE) filter. In-Line Filter housings are manufactured in Nylon, Polypropylene, and Clear Polycarbonate... [See More]
- Type: WireMesh
- Flow: Full Flow
- Configuration: In-line
- Filtration Grade: 100.00
from Eaton
Eaton suction filters protect hydraulic pumps and control systems from solid contaminants. They should be used as immersion suction filters on pump inlet lines. These units have various application possibilities: as in-tank filters mounted directly to the reservoir, in the intake lines of hydraulic... [See More]
- Type: WireMesh
- Maximum Temperature: 176
- Flow Rate (Liquids): 185.0
- Port Description: SAE-flange Connection
from ARKPLAS
In-Line Filters are designed for the removal of most visible particulate in aqueous solutions, and gas streams, by means of either a stainless steel filter, or a high-density polyethylene (HDPE) filter. In-Line Filter housings are manufactured in Nylon, Polypropylene, and Clear Polycarbonate... [See More]
- Type: WireMesh
- Flow: Full Flow
- Configuration: In-line
- Filtration Grade: 200.00
from Eaton
Eaton suction filters protect hydraulic pumps and control systems from solid contaminants. They should be used as immersion suction filters on pump inlet lines. These units have various application possibilities: as in-tank filters mounted directly to the reservoir, in the intake lines of hydraulic... [See More]
- Type: WireMesh
- Filtration Product: HydraulicFluid
- Flow Rate (Liquids): 185.0
- Filter Medium Material: Metal Fiber; Paper; Microglass
from ARKPLAS
In-Line Filters are designed for the removal of most visible particulate in aqueous solutions, and gas streams, by means of either a stainless steel filter, or a high-density polyethylene (HDPE) filter. In-Line Filter housings are manufactured in Nylon, Polypropylene, and Clear Polycarbonate... [See More]
- Type: WireMesh
- Flow: Full Flow
- Configuration: In-line
- Filtration Grade: 200.00
from Eaton
Hydraulic and lubrication oil filter elements are known as elements with a high intrinsic stability and an excellent filtration capability, a high dirt-retaining capacity and a long service life.These filters are suitable for all petroleum based fluids, HW-emulsions, most synthetic hydraulic fluids... [See More]
- Type: WireMesh
- Maximum Temperature: 176
- Flow Rate (Liquids): 185.0
- Port Description: Thread Connection, SAE Flange Connection 3000 PSI
from ARKPLAS
In-Line Filters are designed for the removal of most visible particulate in aqueous solutions, and gas streams, by means of either a stainless steel filter, or a high-density polyethylene (HDPE) filter. In-Line Filter housings are manufactured in Nylon, Polypropylene, and Clear Polycarbonate... [See More]
- Type: WireMesh
- Flow: Full Flow
- Configuration: In-line
- Filtration Grade: 200.00
from Eaton
Eaton's filter elements are known as elements with a high intrinsic stability and an excellent filtration capability, a high dirt-retaining capacity and a long service life. Filters are suitable for all petroleum based fluids, HW-emulsions, most synthetic hydraulic fluids and lubrication oils. The... [See More]
- Type: WireMesh
- Maximum Temperature: 176
- Flow Rate (Liquids): 185.0
- Port Description: Thread Connection, SAE Flange Connection 3000 PSI
from Eaton
Series TEF filters have a simple design that eliminates fittings. Due to its practical design, the return-line filter is easy to service. When changing the filter element a detachable connection between the filter head and the filter bowl prevents a flow back of dirty oil into the tank. Return-line... [See More]
- Type: WireMesh
- Maximum Pressure: 725
- Flow Rate (Liquids): 1902.0
- Maximum Temperature: 176