Plug-in Module Surge Protective Devices (SPDs)
from PHOENIX CONTACT USA
Attachment plug with surge protection for antenna inputs with F connector [See More]
- Mounting: Plug-in
- Standards: RoHS
- Operating Temp: 77 to 167
from Patton Electronics Co.
Patton EPG's Model 570 and 580 twisted pair surge protectors are EIA/TIA TSB-40A Category-5 certified, and operate at speeds up to 100 Mhz. And with specs like N.E.X.T. of -43 db (worst pair), you can rest assured that these units will protect your 100Base-T, RS-422 or 100VG-AnyLan data lines... [See More]
- Mounting: Plug-in
- Connection: RJ41, RJ45 or RJ48 Data Jacks
from MCG SURGE PROTECTION
MCG's rack-mount surge protectors (512H, 516H, etc.) are already internally con-. nected to the rack's metal framework. An additional ground wire is provided. for connection to the frame rack to insure continued excellent protection. [See More]
- Mounting: Wall/Panel; Device Mount; In-line or Integrally Attached; Plug-in
- Connection: RJ21X
- TVSS Signal Protection: Dataline & DC Signal
- Surge Current: 5000
from Time Mark Corporation
Transient/Surge Absorbers (TSAs) provide system designers with a cost effective method of protecting sensitive electrical and electronic equipment from damage caused by switching transients, coil and motor backlash, and near miss lightning strikes. There are 3 models available: single-phase (1P),... [See More]
- Mounting: Plug-in
- Connection: Standard 8-Pin Socket
- TVSS Signal Protection: Single Phase
- Maximum AC Power: 25000
from GAIA Converter
The GAIA Converter limitor LGDS-100 is an ultra compact power adaptator module designed to allow operation during voltage transients and spikes, occuring in avionics or military systems. The LGDS-100 delivers an output voltage adapted to GAIA Converter DC/DC modules. This module is optimized to... [See More]
- Mounting: Plug-in; PCB
- Operating Temp: -40 to 221
- Maximum DC Power: 90 to 100
- Standards: RoHS; MIL-STD704 & 1275, EN2282, DO160
from Surge Suppression Incorporated
Plug & Receptacle Protection Series [See More]
- Mounting: Plug-in
- Mode of Protection: 3-Mode
- Connection: RJ11, RJ13 or RJ14 Phone Jacks (optional feature); RJ41, RJ45 or RJ48 Data Jacks (optional feature); Coaxial Cable Connectors (BNC, F Type etc.) (optional feature); 6 Foot Cord with 6-Plug Model
- Standards: ISO 9001:2008
from Transtector Systems, Inc.
AC surge protector (also known as SPD or lightning protector) 1000-831 from Transtector is a module style SPD that utilizes state of the art MOV technology to protect critical equipment that operates on a 120 Vac electrical service. This surge protector provides effective protection against... [See More]
- Mounting: DIN Rail; Plug-in
- Operating Temp: -4 to 149
- Surge Current: 10000
- Features: NC/NO Dry Contacts; Simple visual indicators (e.g. LEDs)
from Electro Standards Laboratories
Model 303 protects your computer's data interface from destructive transient voltages caused by lightning, brownouts and rolling brownouts!. Sure-Guard Surge Suppressors are designed to limit transient voltages that damage hardware and disrupt data transmission between computers at the DB25 Serial... [See More]
- Mounting: Plug-in
- Connection: DB Type Connector (DB 9, DB 25 etc.)
- TVSS Signal Protection: Dataline & DC Signal
from Patton Electronics Co.
The Patton EPG Token Ring surge protectors guard 802.5 networks against data loss and hardware damage caused by data line transients. Working in conjunction with AC surge protectors, these devices intercept harmful data line transients and divert them safely to chassis ground before they can damage... [See More]
- Mounting: Plug-in
- Maximum AC Power: 1500
- Connection: DB Type Connector (DB 9, DB 25 etc.)
- Standards: IEEE
from MCG SURGE PROTECTION
MCG's rack-mount surge protectors (512H, 516H, etc.) are already internally con-. nected to the rack's metal framework. An additional ground wire is provided. for connection to the frame rack to insure continued excellent protection. [See More]
- Mounting: Wall/Panel; Device Mount; In-line or Integrally Attached; Plug-in
- Connection: Screw Down Terminals; Terminal Blocks or Punch down
- TVSS Signal Protection: Dataline & DC Signal
- Surge Current: 10000
from GAIA Converter
The GAIA Converter limitor LGDS-300 is an ultra compact power adaptator module designed to allow operation during voltage transients and spikes, occuring in avionics or military systems. The LGDS-300 delivers an output voltage adapted to GAIA Converter DC/DC modules. This module is optimized to... [See More]
- Mounting: Plug-in; PCB
- Operating Temp: -40 to 221
- Maximum DC Power: 300
- Standards: RoHS; MIL-STD704 & 1275, EN2282, DO160
from Transtector Systems, Inc.
AC surge protector (also known as SPD or lightning protector) 1000-850 from Transtector is a module style SPD that utilizes state of the art SASD technology to protect critical equipment that operates on a 120 Vac electrical service. This surge protector provides effective protection against... [See More]
- Mounting: DIN Rail; Plug-in
- Operating Temp: -4 to 149
- Surge Current: 10000
- Features: NC/NO Dry Contacts; Simple visual indicators (e.g. LEDs)
from Electro Standards Laboratories
Sure-Guard Plus Surge Suppressor 308 protects your computer's data interface from destructive transient voltages caused by lightning, brownouts and rolling brownouts!. Sure-Guard Model 308 Surge Suppressors are designed to limit transient voltages that damage hardware and disrupt data transmission... [See More]
- Mounting: Plug-in
- Connection: DB Type Connector (DB 9, DB 25 etc.)
- TVSS Signal Protection: Dataline & DC Signal
from Patton Electronics Co.
Features & Benefits. Combined Surge Handling Capability of 3,000 Watts. Diverts Harmful Transients to Chassis Ground through a Heavy-Duty Braided Metal Strap. Model 545 MF has One Male and One Female Twinax Connector for In-Line Hook-Up. Model 545 MFF is a Twinax T-Splitter and Surge Protector... [See More]
- Mounting: Plug-in
- Maximum AC Power: 3000
- Connection: Coaxial Cable Connectors (BNC, F Type etc.)
from GAIA Converter
The GAIA Converter pre-regulator PGDS-50 series designates a low profile power adaptator module designed to extend input bus voltage to meet system operation during voltage transients, spikes, cranking and drop out occuring in avionics or military systems. The PGDS-50 delivers an output voltage... [See More]
- Mounting: Plug-in; PCB
- Operating Temp: -40 to 203
- Maximum DC Power: 4 to 50
- Standards: RoHS; MIL-STD704 & 1275, EN2282, DO160
from Transtector Systems, Inc.
AC surge protector (also known as SPD or lightning protector) 1000-851 from Transtector is a module style SPD that utilizes state of the art SASD technology to protect critical equipment that operates on a 240 Vac electrical service. This surge protector provides effective protection against... [See More]
- Mounting: DIN Rail; Plug-in
- Operating Temp: -4 to 149
- Surge Current: 10000
- Features: NC/NO Dry Contacts; Simple visual indicators (e.g. LEDs)
from Electro Standards Laboratories
Model 316 protects your computer's data interface from destructive transient voltages caused by lightning, brownouts and rolling brownouts!. Sure-Guard Model 316 Surge Suppressors are designed to limit transient voltages that damage hardware and disrupt data transmission between computers at the... [See More]
- Mounting: Plug-in
- Connection: DB Type Connector (DB 9, DB 25 etc.)
- TVSS Signal Protection: Dataline & DC Signal
from Patton Electronics Co.
The Model 1050 AC Powered Asynchronous Short Range Modem is to our AC powered short haul line what the Model 1000 is to our interface powered line-a basic short haul at a great price! And the Model 1050 has the key features you need: optical isolation, a local loopback test mode, LED indicators and... [See More]
- Mounting: Plug-in
- Maximum AC Power: 2400
- Connection: DB Type Connector (DB 9, DB 25 etc.)
from Transtector Systems, Inc.
AC surge protector (also known as SPD or lightning protector) 1000-860 from Transtector is a module style SPD that utilizes state of the art SASD technology to protect critical equipment that operates on a Replacement module electrical service. This surge protector pro-vides effective protection... [See More]
- Mounting: DIN Rail; Plug-in
- Operating Temp: -4 to 149
- Surge Current: 10000
- Features: NC/NO Dry Contacts; Simple visual indicators (e.g. LEDs)
from Patton Electronics Co.
Features & Benefits. Model 500 Protects Pins 2, 3, 7 and 20 (Pin 1 & Shell Connected to Ground). Model 501 Protects Pins 2, 3, 4, 5, 6, 7, 8 and 20 (Pin 1 & Shell Connected to Ground). Combined Surge Handling Capacity of 2400W (Mdl 500) or 4800W (Mdl 501). One Male and One Female... [See More]
- Mounting: Plug-in
- Maximum AC Power: 4800
- Connection: DB Type Connector (DB 9, DB 25 etc.)
from Patton Electronics Co.
Features & Benefits. Model 500 Protects Pins 2, 3, 7 and 20 (Pin 1 & Shell Connected to Ground). Model 501 Protects Pins 2, 3, 4, 5, 6, 7, 8 and 20 (Pin 1 & Shell Connected to Ground). Combined Surge Handling Capacity of 2400W (Mdl 500) or 4800W (Mdl 501). One Male and One Female... [See More]
- Mounting: Plug-in
- Maximum AC Power: 1500
- Connection: DB Type Connector (DB 9, DB 25 etc.)
from Patton Electronics Co.
No one would think of their home as being secure if the front door were locked and the back door left wide open. Yet ArcNet users do the same thing every day: A UPS or AC protector guards the power supply of their workstation, while the LAN data port is unprotected! Surge energy traveling along the... [See More]
- Mounting: Plug-in
- Maximum AC Power: 3000
- Connection: Coaxial Cable Connectors (BNC, F Type etc.)
from Patton Electronics Co.
Features & Benefits. Model 510 Protects Four Wires on the RJ-11 Connector (Combined Surge Handling of 2400 Watts. Model 512 Protects Eight Wires on the RJ-45 Connector (Combined Surge Handling of 4800 Watts). Heavy Braided Ground Strap Diverts Surge Energy to Frame Ground. Clamping at 18 Volts... [See More]
- Mounting: Plug-in
- Maximum AC Power: 1500
- Connection: DB Type Connector (DB 9, DB 25 etc.)
from Patton Electronics Co.
The Patton EPG Model 503S universal surge protector guards any RS-232 system (synchronous or asynchronous) against data loss and hardware damage due to data line transients. There are many data line surge generators: lightning strikes, fluorescent lights, elevator motors, even UPSs. AC protection... [See More]
- Mounting: Plug-in
- Maximum AC Power: 15000
- Connection: DB Type Connector (DB 9, DB 25 etc.)
from Patton Electronics Co.
The Patton EPG Model 509 is available in two versions: the 509/6 for protection of RS-422 equipment, and the 509/25 for protection of EIA-574 (RS-232) equipment. Both versions guard all 9 pins on the DB-9 interface and divert surge energy to their male and female D-shells. [See More]
- Mounting: Plug-in
- Maximum AC Power: 5400
- Connection: DB Type Connector (DB 9, DB 25 etc.)
from Patton Electronics Co.
The Patton Model 56X Series solves the dilemma of providing transient surge protection for multiple Ethernet 802.3 10Base-T ports spaced closely together on a hub. This compact box houses 4, 6, 8 or 12 surge protectors in a high density array. Matching input/output ports on the front and rear panels... [See More]
- Mounting: Plug-in
- Maximum AC Power: 1500
- Connection: RJ41, RJ45 or RJ48 Data Jacks
- Standards: IEEE
from Patton Electronics Co.
Ethernet LANs are highly vulnerable to the harmful effects of data line transient surges: Lightning strikes, induced voltages from elevator motors and florescent lights, static discharges and even the normal functioning of UPS devices can all pose a threat to Ethernet data and hardware. AC surge... [See More]
- Mounting: Plug-in
- Maximum AC Power: 7200
- Connection: DB Type Connector (DB 9, DB 25 etc.)
- Standards: IEEE