Extrusion Grade Resin Polymers and Plastic Resins
from Victrex PLC
High performance thermoplastic material, unreinforced Poly Ether Ether Ketone (PEEK), semi crystalline, coarse powder for extrusion compounding, easy flow, FDA food contact compliant, color natural. [See More]
- Type: ExtrusionGrade; MoldingCompound; Thermoplastic
- Filler: Unfilled
- Chemical System: PEEK
- Form / Shape: Pellets
from MCG - Performance Polymers Division
LINKLON ™ is a silane crosslinkable polyolefin based resin. The crosslinking operates on after the material has been shaped like by extrusion or injection and expose to moisture. The benefit are significant increase of performance at elevate temperature, offering much higher heat ageing... [See More]
- Type: ExtrusionGrade; Thermoplastic
- Tensile (Break): 1740 to 5511
- Industry: Energy Conversion (Battery / Fuel Cell); Electrical Power or High Voltage; Repair or Construction
- Elongation: 400.0 to 1000.0
from Performance Polymers Group
PolyBlend is a family of exceptionally soft, aromatic polyurethane elastomeric alloys, which can be used as a substitute for natural rubber or latex in many applications. These polymers encompass unique characteristics such as low flexural modulus, moderate tensile strength, and high elongation, in... [See More]
- Type: ExtrusionGrade; MoldingCompound; Thermoplastic
- Form / Shape: Pellets
- Chemical System: Polyurethane
- Industry: Sanitary
from LG Chemical of America Inc.
PVC Polyvinyl Chloride. Common plastics that can be used for construction materials and daily commodities. PVC is one of the most widely used thermoplastics and its properties such as robustness or durability can be changed as necessary according to the types of additives mixed during the processing... [See More]
- Type: ExtrusionGrade; MoldingCompound; Thermoplastic
- Chemical System: Vinyl / PVC
from Fluoro-Plastics, Inc.
PTFE can be etched with a sodium ammonia or sodium naphthalene etch so that its surface is chemically modified for adhesion to various substrates using ordinary commercial grade epoxies. When etched for bonding, PTFE can be used as chute liners, vessel linings, and glued to processing surfaces to... [See More]
- Type: ExtrusionGrade; Thermoplastic
- Filler: Unfilled
- Chemical System: Fluoropolymer
- Industry: Electronics; Sanitary; OEM or Industrial; Semiconductors or IC Packaging
from Teknor Apex Company
Material Status. Commercial: Active. Availability. Africa & Middle East. Asia Pacific. Europe. Latin America. North America. Features. Low Temperature Flexibility. Uses. Wire & Cable Applications. Wire Jacketing. Wire Types. NM. NMB. Agency Ratings. UL 719. RoHS Compliance. RoHS Compliant. [See More]
- Type: ExtrusionGrade; Thermoplastic
- Form / Shape: Pellets
- Chemical System: Vinyl / PVC
- Industry: Wire & Cable Applications, Wire Jacketing
from Celanese Corporation
Drying is not normally required. If material has come in contact with moisture through improper storage or handling or through regrind use, drying may be necessary to prevent splay and odor problems. [See More]
- Type: ExtrusionGrade; MoldingCompound; Thermoplastic
- Form / Shape: Pellets
- Filler: Unfilled
- Use Temperature: 176 to 212
from 3M Advanced Materials Division
Through 3M's Thermoplastic Compounding facility in Hebron, KY, customers have the ability to create formulations geared to providing specific properties or funtions which are not inherent in the base resin. Enhancements can range from making the base polymer easy to extrude, to adding properties... [See More]
- Type: ExtrusionGrade; Thermoplastic
- Filler: Glass Bubbles
- Chemical System: Polypropylene; Polyamide; PEEK; Polyphenylene Oxide; Polyurethane; Polyetherimide
- Form / Shape: Pellets
from Wacker Chemical Corp.
ELASTOSIL ® 5100 is a one-component, acid-curing, low modulus silicone sealant for sanitary applications. Special features. suitable for use in sanitary areas. non-sag. ready gunnability at low (+ 5 °C) and high (+ 40 °C) temperatures. flexible at low (- 40 °C) and high temperatures... [See More]
- Type: ExtrusionGrade; Thermally cured
- Filler: Unfilled
- Chemical System: Silicone
- Industry: Sanitary; Repair or Construction
from EMS-GRIVORY America
Characteristics. Processing. Extrusion - cast film, Other Extrusion. Delivery form. Granules. Special Characteristics. Improved UV resistance (outdoor use), Improved heat resistance. Regional Availability. North America, Europe, Asia Pacific, South and Central America, Near East/Africa. Product... [See More]
- Type: ExtrusionGrade; FilmGrade; Thermoplastic
- Filler: Unfilled
- Chemical System: Polyamide
- Form / Shape: Pellets
from MCG - Performance Polymers Division
MODIC ™ offers two technologies designed to be used as a tie-resin or for peelable purposes: MODIC ™ - ACID-GRAFTED POLYMER (TIE RESIN). MODIC ™ tie-layer resin is acid grafted polyolefin forming a layer or a coating which provides adhesion between materials that have poor... [See More]
- Type: ExtrusionGrade; FilmGrade; MoldingCompound; Thermoplastic
- Industry: Automotive; Sanitary; OEM or Industrial
- Chemical System: Polypropylene; Thermoplastic Polyester (PET, PBT, etc.); Polycarbonate; Polyethylene
from Performance Polymers Group
HydroThane is a hydrophilic thermoplastic polyurethane elastomer, ranging in water absorption rates from 5% to 25%. This unique extrudable hydrophilic product line was designed to provide maximum physical properties for use in extruded or injection molded components, while allowing for consistent... [See More]
- Type: ExtrusionGrade; MoldingCompound; Thermoplastic
- Form / Shape: Pellets
- Chemical System: Polyurethane
- Industry: Sanitary
from Fluoro-Plastics, Inc.
Surf Technologies is a leader in the manufacture of heavy walled PTFE tube, both in standard inch sizes and in AWG sizes. Tube is used in fluid handling applications for high temperature acids and caustics or where contamination is an issue, such as in wire braided hose. In applications where PTFE's... [See More]
- Type: ExtrusionGrade; Thermoplastic
- Filler: Unfilled
- Chemical System: Fluoropolymer
- Industry: Electronics; Sanitary; OEM or Industrial; Semiconductors or IC Packaging
from Teknor Apex Company
Material Status. Commercial: Active. Availability. Africa & Middle East. Asia Pacific. Europe. Latin America. North America. Filler / Reinforcement. Talc, 12% Filler by Volume. Features. Flame Retardant. Uses. Appliance Wire Insulation. Appliance Wire Jacketing. Cable Jacketing. Connectors. Flexible... [See More]
- Type: ExtrusionGrade; Thermoplastic
- Form / Shape: Pellets
- Filler: Mineral or Inorganic
- Industry: OEM or Industrial; Appliance Wire Insulation, Appliance Wire Jacketing, Cable Jacketing, Connectors, Flexible Cord Jacketing, Industrial Cable Insulation, Terminal Ca..
from Celanese Corporation
Drying is not normally required. If material has come in contact with moisture through improper storage or handling or through regrind use, drying may be necessary to prevent splay and odor problems. [See More]
- Type: ExtrusionGrade; MoldingCompound; Thermoplastic
- Form / Shape: Pellets
- Filler: Unfilled
- Use Temperature: 176 to 212
from 3M Advanced Materials Division
In 1969, astronauts boarded the Apollo 11 spacecraft wearing boots containing 3M ™ Dyneon ™ Fluoroelastomers. Today, these synthetic elastomeric materials are used in some of the toughest environments on earth. From hot-running automotive engines to harsh chemicals of semiconductor... [See More]
- Type: ExtrusionGrade; FilmGrade; MoldingCompound; Optical; Thermoplastic; Thermally cured
- Filler: Unfilled
- Chemical System: Polypropylene; Polyamide; Fluoropolymer
- Form / Shape: Liquid; Pellets
from MCG - Performance Polymers Division
VINIKA ™ is the brand name for vinyl compounds, including soft (PVC-P) and rigid (PVC-U) solutions. The flexible PVC-P range includes phthalate and phenol free solutions with low VOC (Volatile Organic Content) and the rigid PVC-U line is lead free formulated. ENHANCED SOLUTIONS FOR SPECIFIC... [See More]
- Type: ExtrusionGrade; MoldingCompound; Thermoplastic
- Industry: Automotive; Electronics; Electrical Power or High Voltage; Repair or Construction; OEM or Industrial
- Chemical System: Vinyl / PVC
- Features: Anti-static or ESD Control; Flame Retardant
from Performance Polymers Group
This biocompatible elastomer may be considered as a substitute for rubber, latex and silicone materials. Though soft and compliant, the ChronoPrene resins offer a high flexural modulus, as well as a superior combination of tensile strength and elongation. An easy molding, high-flow rubber,... [See More]
- Type: ExtrusionGrade; MoldingCompound; Thermoplastic
- Industry: Sanitary
- Form / Shape: Pellets
- Features: BioMedical
from Fluoro-Plastics, Inc.
Most widely used filler in various percentages (5%, 10%, 15% and 25%). Improves creep resistance, both at low and high temperatures. Chemically stable (except for strong alkalis and hydrofluoric acid (HF). Little effect on the electrical properties of PTFE, and improves wear and friction behavior. [See More]
- Type: ExtrusionGrade; Thermoplastic
- Filler: Glass or FRP
- Chemical System: Fluoropolymer
- Industry: Electronics; Sanitary; OEM or Industrial; Semiconductors or IC Packaging
from Teknor Apex Company
Material Status. Commercial: Active. Availability. Africa & Middle East. Asia Pacific. Europe. Latin America. North America. Uses. Medical/Healthcare Applications. Pharmaceuticals. Safety Equipment. Agency Ratings. ISO 10993 Part 5. Appearance. Clear/Transparent. Forms. Pellets. Processing Method. [See More]
- Type: ExtrusionGrade; Thermoplastic
- Industry: Sanitary; Medical/Healthcare Applications, Pharmaceuticals, Safety Equipment
- Form / Shape: Pellets
- Tensile (Break): 300
from Celanese Corporation
Assessment of mechanical values using an injection molding machine with dedicated screw. Impelementation: Feb. 2010. It is normally not necessary to dry CELSTRAN PP. However, should there be surface moisture (condensate) on the molding compound as a result of incorrect storage, drying is required. A... [See More]
- Type: ExtrusionGrade; MoldingCompound; Thermoplastic
- Use Temperature: 194 to 212
- Filler: Unfilled
- Elongation: 2.0
from MCG - Performance Polymers Division
TEFABLOC ™ incorporates several technologies including TPE-S, TPO, TPE-E, as well as the newly developed non-food bio based TPU. Its many possible properties can also be boosted in process by reactor or dynamic cross-linking. A well-matched combination of features will satisfy even your most... [See More]
- Type: ExtrusionGrade; MoldingCompound; Thermoplastic
- Features: Flame Retardant
- Industry: Automotive; Electronics; Electrical Power or High Voltage; Sanitary
from Fluoro-Plastics, Inc.
Molded plate is available in thicknesses from 3/8ths of an inch up to four inches. Plate is inventoried in sizes from one-foot square to four feet square (sixteen square feet per sheet). Thickness tolerances range from plus .038" to minus .019" for 3/8th ” plate, up to plus .087", minus .043"... [See More]
- Type: ExtrusionGrade; Thermoplastic
- Filler: Unfilled
- Chemical System: Fluoropolymer
- Industry: Electronics; Sanitary; OEM or Industrial; Semiconductors or IC Packaging
from Teknor Apex Company
Material Status. Commercial: Active. Availability. Asia Pacific. Uses. Closures. Consumer Applications. Gaskets. Handles. Kitchenware. Medical/Healthcare Applications. Packaging. Safety Equipment. Sporting Goods. Toothbrush Handles. Tubing. Writing Instruments. Appearance. Natural Color. Forms. [See More]
- Type: ExtrusionGrade; Thermoplastic
- Industry: Sanitary; Closures, Consumer, Gaskets, Handles, Kitchenware, Medical/Healthcare, Packaging, Safety Equipment, Sporting Goods, Toothbrush Handles, Tubing, Wri..
- Form / Shape: Pellets
- Tensile (Break): 1740
from Celanese Corporation
It is normally not necessary to dry CELSTRAN PP. However, should there be surface moisture (condensate) on the molding compound as a result of incorrect storage, drying is required. A circulating air drying cabinet can be used for this purpose if the gran [See More]
- Type: ExtrusionGrade; MoldingCompound; Thermoplastic
- Use Temperature: 194 to 212
- Filler: Unfilled
- Elongation: 2.5
from MCG - Performance Polymers Division
MCPP has been a leading supplier of high performance TPE (Thermal Plastic Elastomers) resins for the automotive industry for many years. Our THERMORUN ™ engineering grades have been an established and proven global leader in many key related automotive safety systems and applications for... [See More]
- Type: ExtrusionGrade; MoldingCompound; Thermoplastic
- Industry: Automotive
from Fluoro-Plastics, Inc.
Rod is available in both virgin grades and reprocessed (mechanical) for less demanding applications. Surf Technologies extrudes rod in all standard sizes from 1/8th inch diameter up to 4 inches in diameter. Rod is inventoried in twelve foot lengths so it can be cut into six foot lengths (UPS... [See More]
- Type: ExtrusionGrade; Thermoplastic
- Filler: Unfilled
- Chemical System: Fluoropolymer
- Industry: Electronics; Sanitary; OEM or Industrial; Semiconductors or IC Packaging
from Teknor Apex Company
Material Status. Commercial: Active. Availability. Africa & Middle East. Asia Pacific. Europe. Latin America. North America. Uses. Automotive Exterior Trim. Automotive Specifications. GM ITTA 8509. Appearance. Opaque. Forms. Pellets. Processing Method. Extrusion [See More]
- Type: ExtrusionGrade; Thermoplastic
- Industry: Automotive; Automotive Exterior Trim
- Form / Shape: Pellets
- Tensile (Break): 800
from Celanese Corporation
FORTRON should in principle be predried. Because of the necessary low maximum residual moisture content the use of dry air dryers is recommended. The dew point should be = < - 30 ° C. The time between drying and processing should be as short as possible. [See More]
- Type: ExtrusionGrade; MoldingCompound; Thermoplastic
- Use Temperature: 590
- Filler: Unfilled
- Deflection Temperature: 220
from MCG - Performance Polymers Division
PRODUCT FEATURES. 100% Recyclable. Excellent Chemical Resistance. Easy Thermoplastic Processing. Superior Compression Set/Elastic Recovery at elevated temperatures. OEM SPECIFICATIONS TO CUSTOMIZED FORMULATIONS. Grades available in pre-colored, natural or standard black. Highly UV resistant... [See More]
- Type: ExtrusionGrade; MoldingCompound; Thermoplastic
- Industry: Automotive
- Chemical System: Polypropylene
from Fluoro-Plastics, Inc.
Skived sheet can be made in any thickness from 15 mils up to .250 inches. Fluoro-Plastics technology makes it possible to make in-between sizes. Thickness tolerances range from .0005 for sizes from .002" thick to .005" thick up to .003" tolerance for material that is over .060" thick. Skived sheet... [See More]
- Type: ExtrusionGrade; Thermoplastic
- Filler: Unfilled
- Chemical System: Fluoropolymer
- Industry: Electronics; Sanitary; OEM or Industrial; Semiconductors or IC Packaging
from Teknor Apex Company
Material Status. Commercial: Active. Availability. Africa & Middle East. Asia Pacific. Europe. Latin America. North America. Uses. Appliance Wire Insulation. Cable Jacketing. Flexible Cord Insulation. Wire & Cable Applications. Wire Jacketing. Agency Ratings. UL 1581. UL File Number. QMFZ2.E54709. [See More]
- Type: ExtrusionGrade; Thermoplastic
- Form / Shape: Pellets
- Chemical System: Styrene Copolymer
- Industry: Appliance Wire Insulation, Cable Jacketing, Flexible Cord Insulation, Wire & Cable Applications, Wire Jacketing
from Celanese Corporation
Not for Injection Molding. For Compression Molding only. See Ticona for processing.. Not for Injection Molding. For Compression Molding only. See Ticona for processing. [See More]
- Type: ExtrusionGrade; MoldingCompound; Thermoplastic
- Filler: Unfilled
- Chemical System: Polyethylene
- Form / Shape: Pellets
from MCG - Performance Polymers Division
TECHNOLOGIES. ZELAS ™ polymers product range is comprised of 4 groups covering a wide range of properties, designed for film, tube and injected components for medical applications: R-TPO: Reactor TPO for film manufacturing or injection molding. TPE: Modified elastomer with rubber/PVC like... [See More]
- Type: ExtrusionGrade; FilmGrade; MoldingCompound; Thermoplastic
- Industry: Sanitary
from Celanese Corporation
It is normally not necessary to dry HOSTAFORM. However, should there be surface moisture (condensate) on the molding compound as a result of incorrect storage, drying is required. A circulating air drying cabinet can be used for this purpose if the granul [See More]
- Type: ExtrusionGrade; MoldingCompound; Thermoplastic
- Features: UL
- Filler: Unfilled
- Use Temperature: 248 to 284
from MCG - Performance Polymers Division
G-Polymer ™, which can be used to freely control crystallinity and the cohesive power of the noncrystalline part, is the next generation of vinyl alcohol resins. KEY FEATURES. OUTSTANDING TRANSPARENCY AND SOLVENT RESISTANCE. In addition to outstanding transparency and solvent resistance,... [See More]
- Type: ExtrusionGrade; FilmGrade; Thermoplastic
- Industry: Electronics; Sanitary
- Chemical System: Vinyl / PVC
from Celanese Corporation
It is normally not necessary to dry HOSTAFORM. However, should there be surface moisture (condensate) on the molding compound as a result of incorrect storage, drying is required. A circulating air drying cabinet can be used for this purpose if the granul [See More]
- Type: ExtrusionGrade; MoldingCompound; Thermoplastic
- Filler: Unfilled
- Chemical System: Acetal or Polyoxymethylene (POM)
- Features: UL