Analog Current Dry Material (Powders) Level Sensors
from Locon Sensor Systems, Inc.
Capacitive sensing technology allows for detection of several different target materials from food substances to plastics, oil or glue to fine powders. We manufacture and sell proximity and level detection capacitive sensors that will easily integrate into your existing system, or can be designed... [See More]
- Output Options: AnalogCurrent
- Measuring Range: 0.0394 to 1.18
- Device Classification: Sensor Only
- Material Temperature Range: -22 to 158
from ABB Measurement & Analytics
LevelExpert concentrates 20 years of industrial level measurement experience into an intelligent instrument made to accurately detect levels, even in the most demanding conditions. Forget about baseline mapping and echo selection; LevelExpert knows how to find the right level through the clutter. [See More]
- Output Options: AnalogCurrent
- Level Measurement Type: Continuous Level
- Device Classification: Sensor System
- Measuring Range: 1.97 to 2362
from BinMaster, Inc.
In very large bins, tanks or silos, the BinMaster MVL 3D multiple-scanner system is the answer for precise inventory management. The MVL system integrates multiple-point measurement data from two or more 3D Level Scanners to cover a very wide surface area which makes it able to estimate inventory... [See More]
- Output Options: AnalogCurrent
- Level Measurement Type: Continuous Level
- Device Classification: Sensor System
- Measuring Range: ? to 2400
from Arjay Engineering
Reliable level alarm and control of liquids and solids. As a liquid or solid rises or lowers around the probe, the capacitance field changes. This is monitored and used to control the two on-board relays. Each relay includes full differential control to allow the relay to activate and de-activate... [See More]
- Output Options: AnalogCurrent
- Level Measurement Type: Single Point or Multi-Point Level
- Device Classification: Sensor Only; Sensor System
- Maximum Operating Pressure: 1500
from Locon Sensor Systems, Inc.
High-temperature tolerant capacitives are especially suitable for applications where the sensor head is exposed to extreme temperatures, or comes directly into contact with hot materials. These sensors are used as level detectors for liquids and bulk goods, or choose the cylindrical series for... [See More]
- Output Options: AnalogCurrent
- Material Temperature Range: -22 to 257
- Device Classification: Sensor Only
- Meter Technology Type: Capacitive/RF Admittance
from ABB Measurement & Analytics
The MT5000 Series Guided Wave Radar transmitters feature a graphic display incorporated into an all digital electronics module. Using this new format K-TEK has been able to add waveform screens to the modular electronics along with easy to follow multiple choice setup menus. These menus can be... [See More]
- Output Options: AnalogCurrent
- Measuring Range: 23.62 to 2604
- Device Classification: Sensor System
- Accuracy (Continuous Level): 0.1181
from BinMaster, Inc.
Highly reliable even in extreme dust, the BinMaster RL level sensor is a non-contact level sensor that works in powders and solid materials of all types--including very low dielectric materials. The BinMaster RL measures a single point in the bin using acoustics-based technology to provide... [See More]
- Output Options: AnalogCurrent
- Level Measurement Type: Continuous Level
- Device Classification: Sensor System
- Material Temperature Range: 185
from Arjay Engineering
Reliable monitoring of liquids and solids for a continuous level output. The probe continuously monitors product levels to provide a proportional level signal for pumps, alarms or control system interface. The 2880-LT sensing probe monitors the capacitance field around the active probe. As the... [See More]
- Output Options: AnalogCurrent
- Level Measurement Type: Continuous Level
- Device Classification: Sensor Only; Sensor System
- Maximum Operating Pressure: 1500
from ABB Measurement & Analytics
The MT5000 Series Guided Wave Radar transmitters feature a graphic display incorporated into an all digital electronics module. Using this new format K-TEK has been able to add waveform screens to the modular electronics along with easy to follow multiple choice setup menus. These menus can be... [See More]
- Output Options: AnalogCurrent
- Measuring Range: 23.62 to 2604
- Device Classification: Sensor System
- Accuracy (Continuous Level): 0.1181
from BinMaster, Inc.
BinMaster's 3D Level Scanner is the only level sensor that measures multiple points on a material's surface, providing continuous, non-contact inventory volume measurement that accounts for irregular material topography. This advanced acoustics-based technology is proven to perform in powders and... [See More]
- Output Options: AnalogCurrent
- Level Measurement Type: Continuous Level
- Device Classification: Sensor System
- Measuring Range: ? to 2400
from Arjay Engineering
Non-intrusive monitoring of chutes and hoppers for bulk material detection. Combining the technology of capacitance with unique sensor designs provide non-intrusive monitors for bulk solids handling systems. The result is a low cost and low maintenance system to determine the presence or absence of... [See More]
- Output Options: AnalogCurrent
- Level Measurement Type: Continuous Level
- Device Classification: Sensor Only; Sensor System
- Material Temperature Range: -76 to 131
from ABB Measurement & Analytics
The measuring laser uses invisible, infrared light. There is a second, visible aiming laser to help with the alignment of the measuring laser. The laser beams have very little divergence so that accurate targeting is easy even in silos or vessels that have internal structures. FEATURES: ·... [See More]
- Output Options: AnalogCurrent
- Measuring Range: 4800
- Level Measurement Type: Continuous Level
- Communication Interface Options: Digital Serial
from BinMaster, Inc.
BinMaster ’s GWR-2000 utilizes time domain reflectometry (TDR) to continuously measure the distance, level, and volume of powders or solids in bins, tanks, and silos. This sensor features hazardous location approvals, a very small upper dead zone, and assures highly accurate level measurement... [See More]
- Output Options: AnalogCurrent
- Level Measurement Type: Continuous Level
- Device Classification: Sensor System
- Measuring Range: ? to 1200
from ABB Measurement & Analytics
Based on pulsed laser technology, the LM80 embodies speed and accuracy in a single, easy to use and install product. Whether measuring a few meters into the confined space of a crusher, or to the bottom of the tallest silo, the LM80 with its laser pointer and long range is the plug-and-play solution... [See More]
- Output Options: AnalogCurrent
- Measuring Range: 6000
- Level Measurement Type: Continuous Level
- Accuracy (Continuous Level): 1.2
from BinMaster, Inc.
The SmartBob II Remote is a proven, reliable level measurement system using cable-based sensoring technology. Combined with the powerful eBob software and remote control consoles, SmartBob II offers the strongest and smartest cable-based inventory measurement system on the market today –with... [See More]
- Output Options: AnalogCurrent
- Level Measurement Type: Continuous Level
- Device Classification: Sensor System
- Measuring Range: ? to 1800
from FineTek
The EB5 Series is an RF admittance level transmitter that continuously measures the changing level of a powder, granular or liquid material within a containment vessel. The RF admittance level transmitter measures the changing capacitance between the sensing probe and the reference ground (reference... [See More]
- Output Options: AnalogCurrent
- Meter Technology Type: Capacitive/RF Admittance
- Level Measurement Type: Continuous Level
- Features: Can handle liquids with suspended solids (slurries)
from Automation24, Inc.
The Minicap FTC260-JB2H1 capacitance point level detector from Endress+Hauser with a probe length of 5.5" (140 mm) is a simple cable probe for point level detection in bulk solids, which is particularly suitable for applications with aggressive media and heavy accumulation. The PNP-switching point... [See More]
- Output Options: AnalogCurrent
- Level Measurement Type: Single Point or Multi-Point Level
- Device Classification: Sensor System
- Measuring Range: 5.51
from VEGA Americas, Inc.
Application area. 4 ... 20 mA output, measuring range up to 8 m, accuracy ±5 mm. VEGAPULS 11 is the ideal sensor for non-contact level measurement of liquids and bulk solids in simple applications. It is particularly suitable for use in water treatment, storage tanks with acids, lyes and... [See More]
- Output Options: AnalogCurrent
- Meter Technology Type: Radar/Microwave
- Device Classification: Sensor Only
- Operating Temp: -40 to 140
from KOBOLD Instruments, Inc.
The KOBOLD NGM Series guided wave radar level transmitter uses time domain reflectometry (TDR) technology, also known as “guided microwave ” or “guided wave radar. ” This means that low-energy and high-frequency electromagnetic impulses, generated by the sensor ’s... [See More]
- Output Options: AnalogCurrent
- Level Measurement Type: Continuous Level
- Device Classification: Sensor Only
- Measuring Range: 787
from KROHNE Messtechnik
Radar (FMCW) level transmitter for solids from granulates to rocks. The OPTIWAVE 6400 is a 2-wire 24 GHz radar (FMCW) level transmitter for basic applications with solids. This radar is designed for continuous, non-contact level measurement of stones, plastic granulates, coffee beans and other... [See More]
- Output Options: AnalogCurrent
- Measuring Range: 0.0 to 3937
- Level Measurement Type: Continuous Level
- Repeatability (Point Level): 0.0400
from Sitron
The SC404 is a capacitance continuous level transmitter with an integrated electronics module mounted within the nylon or aluminum housing. This 2 wire loop powered unit provides a 4-20mA output with set up and calibration achieved with a zero and span adjustment. This flexible level measurement... [See More]
- Output Options: AnalogCurrent
- Maximum Operating Pressure: 290
- Level Measurement Type: Single Point or Multi-Point Level
- Meter Technology Type: Capacitive/RF Admittance
from Malema Sensors
LU90 series transmitter is an advanced level instrument based on the transmission of ultrasonic waves to measure the level of liquid or solid in a vessel. Its non contact measurement makes it suitable for highly corrosive liquids. User friendly programming keys and local read out helps setting up... [See More]
- Output Options: AnalogCurrent
- Measuring Range: 11.81 to 276
- Level Measurement Type: Continuous Level
- Accuracy (Continuous Level): 0.0787
from Massa Products Corporation
The MassaSonic ® FlatPack ® Sensors are low profile designed ultrasonic transmitter modules. They are optimized to provide continuous non-contact distance measurement of fluids, pastes, or uneven solid bulk materials in constrained working zones for application ranges from 1 inch (25 mm)... [See More]
- Output Options: AnalogVoltage; AnalogCurrent
- Measuring Range: 4 to 156
- Level Measurement Type: Continuous Level
- Meter Technology Type: Ultrasonic/Sonic
from Burkert Fluid Control Systems
The type 8177 is a non-contact ultrasonic level measuring device, designed for continuous level measurement in open or closed vessels. The unit is suitable for liquids, but also for solids, in virtually all industries, particularly in water and waste water management. [See More]
- Output Options: AnalogCurrent
- Measuring Range: 315
- Level Measurement Type: Continuous Level
- Maximum Operating Pressure: 29.01
from Monitor Technologies LLC
Electrical isolation for reliable operation, sensor electronics meet CE1010 [See More]
- Output Options: AnalogVoltage; AnalogCurrent
- Level Measurement Type: Continuous Level; Single Point or Multi-Point Level
- Device Classification: Sensor System
- Measuring Range: ? to 1800
from Siemens Process Instrumentation
Four models make up the series of Siemens guided wave radar for measuring interface or level. Quick and easy setup with local four-button programming and menu-driven quick start wizard gets you operational in minutes, saving you time and money. Plus, the unit comes pre-configured to fit your... [See More]
- Output Options: AnalogCurrent
- Level Measurement Type: Continuous Level
- Device Classification: Sensor System
- Measuring Range: 11.81 to 2953
from FineTek
The EE300 Series is an electromechanical inventory level measuring system which uses state-of-the-art third generation weight & cable technology to periodically measure the level of liquid and bulk solid materials held in storage. The EE300 series level measuring system includes the EE300 sensor... [See More]
- Output Options: AnalogCurrent
- Measuring Range: 1176
- Device Classification: Sensor System
- Communication Interface Options: Digital Serial
from Automation24, Inc.
The Minicap FTC260-UB2B1 capacitance point level detector from Endress+Hauser with a probe length of 5.5" (140 mm) is a simple cable probe for point level detection in bulk solids, which is particularly suitable for applications with aggressive media and heavy accumulation. The PNP-switching point... [See More]
- Output Options: AnalogCurrent
- Level Measurement Type: Single Point or Multi-Point Level
- Device Classification: Sensor System
- Measuring Range: 5.51
from VEGA Americas, Inc.
Application area. 4 ... 20 mA/HART output, measuring range up to 15 m, accuracy ±2 mm, Ex approval, on-site display and 3-button operation. VEGAPULS 31 is the ideal sensor for non-contact level measurement of liquids and bulk solids in simple applications. It is particularly suitable for use in... [See More]
- Output Options: AnalogCurrent
- Meter Technology Type: Radar/Microwave
- Device Classification: Sensor Only
- Operating Temp: -40 to 158
from Sitron
The SC404 is a capacitance continuous level transmitter with an integrated Galvanic Isolator and electronics module mounted within the Large aluminum housing. This 2 wire loop powered unit provides a 4-20mA output with set up and calibration achieved with a zero and span adjustment. This flexible... [See More]
- Output Options: AnalogCurrent
- Maximum Operating Pressure: 290
- Level Measurement Type: Single Point or Multi-Point Level
- Meter Technology Type: Capacitive/RF Admittance
from Massa Products Corporation
MassaSonic ® PulStar ® Series Ultrasonic Sensors are ruggedly designed transmitting modules that provide reliable continuous level or distance measurement of fluids, pastes, or solid bulk materials. PulStar Sensors accurately operate at application ranges from 4 inches (100 mm) to 20 feet (6... [See More]
- Output Options: AnalogVoltage; AnalogCurrent
- Measuring Range: 8 to 240
- Level Measurement Type: Continuous Level
- Meter Technology Type: Ultrasonic/Sonic
from Siemens Process Instrumentation
SITRANS LR100 series are 80 GHz compact radar transmitters with Bluetooth wireless technology. Featuring a narrow beam for flexible installations in existing vessel openings – or non-intrusively through plastic vessels. The series consists of five transmitters: SITRANS LR100 - for basic... [See More]
- Output Options: AnalogCurrent
- Level Measurement Type: Continuous Level
- Device Classification: Sensor Only
- Measuring Range: 312
from FineTek
The JFR Series is a open-air radar level transmitter designed for measuring the changing level of liquids, slurries and bulk solids in tanks, bins and silos. Operating at either 10GHz or 26GHz the JRF series radar level transmitter products will provide non-contact continuous level measurement with... [See More]
- Output Options: AnalogCurrent
- Measuring Range: 1560
- Level Measurement Type: Continuous Level
- Features: Can handle liquids with suspended solids (slurries)
from Automation24, Inc.
The Minicap FTC262-SB34H1 capacitance point level detector from Endress+Hauser with a probe length of 59" (1,500 mm) and relay output is a simple cable probe for point level detection in bulk solids, which is particularly suitable for applications with aggressive media and heavy accumulation. The... [See More]
- Output Options: AnalogCurrent
- Level Measurement Type: Single Point or Multi-Point Level
- Device Classification: Sensor System
- Measuring Range: 59.06
from VEGA Americas, Inc.
Application area. From ¾ thread", universal connection G1" for hygiene adapter, three-wire: IO-Link, PNP/NPN, 4 ... 20 mA (active), hygiene approval, coloured 360 ° status display. VEGAPULS 42 is the ideal sensor for non-contact level measurement of liquids and bulk solids in simple to... [See More]
- Output Options: AnalogCurrent
- Level Measurement Type: Continuous Level
- Device Classification: Sensor Only
- Meter Technology Type: Radar/Microwave
from Siemens Process Instrumentation
The capacitive level switches of the Pointek CLS series ensure excellent measurement performance, even under the harsh conditions of high-pressure and high-temperature applications. SITRANS LCS100 - Versatile liquids and solids point level or interface detection with IO-Link. Active shield... [See More]
- Output Options: AnalogCurrent
- Level Measurement Type: Single Point or Multi-Point Level
- Device Classification: Sensor Only
- Measuring Range: 3.6 to 787
from Automation24, Inc.
The PNP-switching capacitance point level detector Minicap Nivector FTI26-CA4VWDG from Endress+Hauser with a process pressure range of -1 –6 bar is used for the collection of fine-grained and powdery solids, especially in the food industry. The capacitance point level detector Nivector... [See More]
- Output Options: AnalogCurrent
- Level Measurement Type: Single Point or Multi-Point Level
- Device Classification: Sensor System
- Maximum Operating Pressure: 87
from VEGA Americas, Inc.
Application area. Axial cable outlet, 4 ... 20 mA output, measuring range up to 8 m, accuracy ±5 mm, PVC cable with 10 m length. VEGAPULS C 11 is the ideal sensor for non-contact level measurement in simple applications where a high degree of protection is required. It is particularly suitable... [See More]
- Output Options: AnalogCurrent
- Meter Technology Type: Radar/Microwave
- Device Classification: Sensor Only
- Operating Temp: -40 to 140
from Siemens Process Instrumentation
Siemens vibrating level switches detect high, low, and demand levels for liquids and solids. They perform in extreme conditions and benefit many industries. SITRANS LVL100: detects liquid and slurry levels in confined spaces. SITRANS LVL200: detects liquid and slurry levels while monitoring for... [See More]
- Output Options: AnalogCurrent
- Measuring Range: 1.57 to 157
- Level Measurement Type: Single Point or Multi-Point Level
- Maximum Operating Pressure: 2320
from Automation24, Inc.
The PNP-switching capacitance point level detector Minicap Nivector FTI26-CO4NWDJ from Endress+Hauser with a process pressure range of -1 –6 bar is used for the collection of fine-grained and powdery solids, especially in the food industry. It has ATEX approval and can therefore also be used... [See More]
- Output Options: AnalogCurrent
- Level Measurement Type: Single Point or Multi-Point Level
- Device Classification: Sensor System
- Maximum Operating Pressure: 87
from VEGA Americas, Inc.
Application area. Lateral cable outlet, measuring range up to 15 m, accuracy ±2 mm, 4 ... 20 mA, HART, SDI-12 or Modbus output, Ex approval. VEGAPULS C 22 is the ideal sensor for non-contact level measurement in simple applications where a high degree of protection is required. It is... [See More]
- Output Options: AnalogCurrent
- Meter Technology Type: Radar/Microwave
- Device Classification: Sensor Only
- Operating Temp: -40 to 176