Ball Plunger Ball and Spring Plungers
from RS Components, Ltd.
Ball spring plunger [See More]
- Plunger Type: Ball Plunger; Spring Plunger
- Body: Stainless Steel
- Thread Size: M8 x 1.25; Other Metric Thread; M8
from Imao-Fixtureworks
RoHS, SUS, Ball Plungers [See More]
- Plunger Type: Ball Plunger
- End Force: 1.12 to 53.95
- Stroke: 0.0197 to 0.1772
- Body: Steel
from Jergens, Inc.
Stainless Steel Ball Plungers - Fine Thread (UNF). Jergens Ball Plungers are made under extremely accurate machine controls and rigid inspection procedures. Accurate spring alignment is maintained by using a stainless rivet with a long shank on larger sizes of our Ball Plungers. This precisely... [See More]
- Plunger Type: Ball Plunger
- End Force: 0.5000
- Thread Size: #4-48
- Body: Stainless Steel; 303 Stainless Steel
from Vlier
Ball plungers can take the highest degree of side load and provide repeatable force time and time again. They offer maximum protection against rust and corrosion, and are ideal for food, medical and special environments. The stainless steel ball design can withstand high temperatures. Typical Uses. [See More]
- Plunger Type: Ball Plunger
- Stroke: 0.7480
- Thread Size: M10 x 1.5
- End Force: 7.87
from RS Components, Ltd.
Ball spring plunger [See More]
- Plunger Type: Ball Plunger; Spring Plunger
- Body: Stainless Steel
- Thread Size: M6 x 1.0; Other Metric Thread; M6
from Imao-Fixtureworks
RoHS, SUS, Ball Plungers [See More]
- Plunger Type: Ball Plunger
- End Force: 0.3372 to 53.95
- Stroke: 0.0197 to 0.1772
- Body: Stainless Steel
from Jergens, Inc.
Steel Ball Plungers - Fine Thread (UNF). Jergens Ball Plungers are made under extremely accurate machine controls and rigid inspection procedures. Accurate spring alignment is maintained by using a stainless rivet with a long shank on larger sizes of our Ball Plungers. This precisely positions the... [See More]
- Plunger Type: Ball Plunger (Locking)
- End Force: 4
- Thread Size: 1/4-28
- Body: Steel; Low Carbon Steel
from Vlier
Ball plungers can take the highest degree of side load and provide repeatable force time and time again. Typical Uses. Positioning. Indexing. Locating. Torque limiting. Gear shifters. Detents. Special Features. Smallest & lightest spring-loaded device. Side-load tolerant. Controlled end forces. [See More]
- Plunger Type: Ball Plunger
- Stroke: 0.1870
- Thread Size: #4-48
- End Force: 0.5000
from RS Components, Ltd.
Ball spring plunger [See More]
- Plunger Type: Ball Plunger; Spring Plunger
- Body: Stainless Steel
from Imao-Fixtureworks
Plastic Locking Element for Loose Prevention, RoHS, Ball Plungers [See More]
- Plunger Type: Ball Plunger (Thread Locking Element)
- End Force: 0.3372 to 40.46
- Stroke: 0.0197 to 0.1378
- Body: Steel
from Vlier
Delrin ® ball plungers with stainless steel or nylon plastic ball are ideal for applications where products or components are made mostly or entirely of plastic. Typical Uses. Lightweight applications. Special Features. Steel or stainless steel body with nylon ball. Electrical isolation. Highly... [See More]
- Plunger Type: Ball Plunger
- Stroke: 0.5310
- Thread Size: 1/4-20
- End Force: 5
from RS Components, Ltd.
Ball spring plunger [See More]
- Plunger Type: Ball Plunger; Spring Plunger
- Body: Stainless Steel
from Imao-Fixtureworks
Plastic Locking Element for Loose Prevention, RoHS, SUS, Ball Plungers [See More]
- Plunger Type: Ball Plunger (Thread Locking Element)
- End Force: 0.3372 to 40.46
- Stroke: 0.0197 to 0.1378
- Body: Stainless Steel
from Vlier
Expanded metric series plungers are designed for easy installation. They are ideal where a threaded plunger is impractical or when threaded adjustments are not required. Double Ended. Typical Uses. Indexing. Electrical contacts. Locating. Torque limiting. Positioning. Detents. Special Features. Easy... [See More]
- Plunger Type: Ball Plunger; Expanded Metric
- End Force: 5.01
- Stroke: 0.5315
from RS Components, Ltd.
Ball spring plunger [See More]
- Plunger Type: Ball Plunger; Spring Plunger
- Body: Stainless Steel
from Imao-Fixtureworks
RoHS, SUS, Ball Plungers with Ceramic Ball [See More]
- Plunger Type: Ball Plunger
- End Force: 1.35 to 28.1
- Stroke: 0.0315 to 0.0984
- Body: Stainless Steel
from Vlier
Our hex-head ball plungers are compact units suitable for applications with side loading requirements and are available in either steel or stainless steel design. Available in four of our most popular sizes, all have a unique hex-head with a screwdriver slot that provides two installation options. [See More]
- Plunger Type: Ball Plunger
- Stroke: 0.7200
- Thread Size: 1/4-20
- End Force: 7
from RS Components, Ltd.
Ball spring plunger [See More]
- Plunger Type: Ball Plunger; Spring Plunger
- Body: Stainless Steel
- Thread Size: M4 x 0.7; Other Metric Thread; M4
from Imao-Fixtureworks
RoHS, Double Ball Plungers [See More]
- Plunger Type: Ball Plunger
- Stroke: 0.0256 to 0.1142
- Non-threaded: 0.0984 to 0.3937
- End Force: 0.3372 to 3.6
from Vlier
Knurled press-fit ball plungers are designed for easy installation into wood, soft plastic or aluminum. Nylon ball resists marring. These press-fit ball plungers are ideal where a threaded ball plunger is impractical or when threaded adjustments are not required. Knurled press-fit ball plungers in... [See More]
- Plunger Type: Ball Plunger; Press Fit Plunger; Knurled Head Plunger
- Body: Steel; Stainless Steel
from RS Components, Ltd.
Ball spring plunger [See More]
- Plunger Type: Ball Plunger; Spring Plunger
- Body: Steel
- Thread Size: M8 x 1.25; Other Metric Thread; M8
from Imao-Fixtureworks
RoHS, Hex Socket Ball Plungers [See More]
- Plunger Type: Ball Plunger
- End Force: 0.3372 to 60.7
- Stroke: 0.0197 to 0.2165
- Body: Steel
from Vlier
Nylon ball plungers in stainless steel provide resistance to repeated impacts, moisture, solvents and heat up to 190 ºF. The nylon ball nose provides electrical insulating properties. The stainless steel body affords maximum protection against rust and corrosion. Typical Uses. Positioning. [See More]
- Plunger Type: Ball Plunger
- Stroke: 0.7480
- Thread Size: M10 x 1.5
- End Force: 7.87
from RS Components, Ltd.
Model 10 IP 8.5mm (ball) 10mm x 13 [See More]
- Plunger Type: Ball Plunger
- Body: Plastic
from Imao-Fixtureworks
RoHS, SUS, Hex Socket Ball Plungers [See More]
- Plunger Type: Ball Plunger
- End Force: 0.3372 to 60.7
- Stroke: 0.0197 to 0.2165
- Body: Stainless Steel
from Vlier
Nylon ball plungers in steel provide resistance to repeated impacts, moisture, solvents and heat up to 190 ºF. The nylon ball nose provides electrical insulating properties. Typical Uses. Positioning. Locating. Indexing. Torque limiting. Gear shifters. Detents. Special Features. Steel body with... [See More]
- Plunger Type: Ball Plunger
- Stroke: 0.1870
- Thread Size: #4-48
- End Force: 0.5000
from RS Components, Ltd.
Model 10 IP 6.35mm (ball) 8mm x 9 [See More]
- Plunger Type: Ball Plunger
- Body: Plastic
from Imao-Fixtureworks
Plastic Locking Element for Loose Prevention, RoHS, Hex Socket Ball Plungers [See More]
- Plunger Type: Ball Plunger (Thread Locking Element)
- End Force: 0.3372 to 40.46
- Stroke: 0.0197 to 0.1378
- Body: Steel
from Vlier
The enhanced design of our Posi-HexTM ball plunger allows for easy installation, removal or change-outs using only a hex wrench. Designed to withstand maximum installation torque, Posi-HexTM works great when using our thread locking element. The stainless steel construction offers maximum protection... [See More]
- Plunger Type: Ball Plunger; Posi-Hex
- Stroke: 0.3500
- Thread Size: #6-40
- End Force: 1
from RS Components, Ltd.
Model 10 IP 5mm (ball) 6mm x 7 PL [See More]
- Plunger Type: Ball Plunger
- Body: Plastic
from Imao-Fixtureworks
Plastic Locking Element for Loose Prevention, RoHS, SUS, Hex Socket Ball Plungers [See More]
- Plunger Type: Ball Plunger (Thread Locking Element)
- End Force: 0.3372 to 40.46
- Stroke: 0.0197 to 0.1378
- Body: Stainless Steel
from Vlier
The enhanced design of our Posi-HexTM ball plungers allows for easy installation and removal using only a hex wrench. Designed to withstand maximum installation torque, Posi-HexTM works great when using our thread locking element. These compact spring plungers offer quick change-outs that save... [See More]
- Plunger Type: Ball Plunger; Posi-Hex
- Stroke: 0.3500
- Thread Size: #6-40
- End Force: 1
from RS Components, Ltd.
Model 10 IP 2.38mm (ball) 3mm x 4 [See More]
- Plunger Type: Ball Plunger
- Body: Plastic
from Imao-Fixtureworks
RoHS, SUS, Hex Socket-Head Ball Plungers [See More]
- Plunger Type: Ball Plunger
- End Force: 2.02 to 12.36
- Stroke: 0.0394 to 0.0984
- Body: Steel (optional feature); Stainless Steel
from Vlier
Push-fit ball plungers are designed for easy installation into wood, soft plastic or aluminum. Ideal where a threaded spring plunger is impractical or when threaded adjustments are not required. The stainless steel variety offers the added benefit of maximum protection against rust and corrosion. [See More]
- Plunger Type: Ball Plunger; Press Fit Plunger
- End Force: 2.5
- Stroke: 0.2520
- Body: Stainless Steel
from RS Components, Ltd.
Model 10 IP 4mm (ball) 5mm x 6 PLU [See More]
- Plunger Type: Ball Plunger
- Body: Plastic
from Imao-Fixtureworks
RoHS, SUS, Long Press-Fit Ball Plungers [See More]
- Plunger Type: Ball Plunger
- Stroke: 0.0315 to 0.1260
- Non-threaded: 0.1575 to 0.4724
- End Force: 2.7 to 27.43
from RS Components, Ltd.
Model 10 IP 3mm (ball) 4mm x 5 PLU [See More]
- Plunger Type: Ball Plunger
- Body: Plastic
from Imao-Fixtureworks
RoHS, SUS, Plastic Ball Plungers [See More]
- Plunger Type: Ball Plunger
- End Force: 2.02 to 8.99
- Stroke: 0.0394 to 0.0787
- Body: Plastic
from RS Components, Ltd.
Model 10 IP 1.5mm (ball) 2mm x 3 P [See More]
- Plunger Type: Ball Plunger
- Body: Stainless Steel
from Imao-Fixtureworks
RoHS, SUS, Press-Fit Ball Plungers [See More]
- Plunger Type: Ball Plunger
- Stroke: 0.0276 to 0.1378
- Non-threaded: 0.1575 to 0.4724
- End Force: 0.6744 to 5.62
from RS Components, Ltd.
MODEL 10 IP 3MM (BALL) [See More]
- Plunger Type: Ball Plunger
- Body: Stainless Steel
- Thread Size: M10 x 1.5; Other Metric Thread; M10 x 1
from Imao-Fixtureworks
RoHS, SUS, Press-Fit Ball Plungers [See More]
- Plunger Type: Ball Plunger
- Stroke: 0.0256 to 0.1260
- Non-threaded: 0.1181 to 0.4724
- End Force: 0.3822 to 27.43
from RS Components, Ltd.
MODEL 10 IP 4MM (BALL) [See More]
- Plunger Type: Ball Plunger
- Body: Stainless Steel
- Thread Size: M10 x 1.5; Other Metric Thread; M10 x 1
from Imao-Fixtureworks
RoHS, SUS, Press-Fit Ball Plungers [See More]
- Plunger Type: Ball Plunger
- Stroke: 0.0315 to 0.1378
- Non-threaded: 0.1575 to 0.4724
- End Force: 0.6744 to 5.62
from RS Components, Ltd.
MODEL 10 IP 5MM (BALL) [See More]
- Plunger Type: Ball Plunger
- Body: Stainless Steel
- Thread Size: M10 x 1.5; Other Metric Thread; M10 x 1
from RS Components, Ltd.
MODEL 10 IP 10MM (BALL) 12MM X 16 [See More]
- Plunger Type: Ball Plunger
- Body: Stainless Steel
- Thread Size: M10 x 1.5; Other Metric Thread; M10 x 1
from RS Components, Ltd.
MODEL 10 IP 3MM (BALL) [See More]
- Plunger Type: Ball Plunger
- Body: Plastic
- Thread Size: M10 x 1.5; Other Metric Thread; M10 x 1
from RS Components, Ltd.
MODEL 10 IP 4MM (BALL) [See More]
- Plunger Type: Ball Plunger
- Body: Plastic
- Thread Size: M10 x 1.5; Other Metric Thread; M10 x 1
from RS Components, Ltd.
MODEL 10 IP 5MM (BALL) [See More]
- Plunger Type: Ball Plunger
- Body: Plastic
from RS Components, Ltd.
MODEL 10 IP 8.5MM (BALL [See More]
- Plunger Type: Ball Plunger
- Body: Plastic
- Thread Size: M10 x 1.5; Other Metric Thread; M10 x 1
from Te-Co, Inc.
Product Information. Material: Steel Body: 12L14Steel. Stainless Steel Body: 303 Stainless Steel. Ball: 440 Stainless Steel or Nylon. Smallest and lightest spring loaded device. Side-load tolerant. Controlled end forces. Screwdriver installation. Many sizes conform to TCMAI standards. Steel Bodies... [See More]
- Plunger Type: Ball Plunger (Thread Locking Element)
- Body: Stainless Steel
- Thread Size: 1/2-13
- Ball / Plunger: Plastic; Nylon Ball
from Reid Supply
Used for locating, positioning, indexing and securing. Our Index Plungers allow for rapid adjustments on a variety of platforms, fixtures and tables.Suitable for gym equipment, medical aids, catering equipment, conveyors etc.Comes with Threaded and No Thread Locking Element. . SLS-11 features a 1-8... [See More]
- Plunger Type: Ball Plunger
- End Force: 16
- Thread Size: 1-8; 1-8
- Body: Stainless Steel; Stainless Steel
from NBK America LLC
There is a spacer between the ball and spring (Except for M2 / M3). The ball rotates. Made of all stainless steel. It is highly corrosion-resistant and heat-resistant. We also produce products of special specifications, e.g. dimensions, load and materials. Plungers : Related Information. Load type... [See More]
- Plunger Type: Ball Plunger
- Stroke: 0.0472
- Thread Size: M10 x 1.5
- End Force: 4.27
from BNB INT. Co., Ltd.
A ball plunger helps determine the position so that a target arrives at the correct position.. This bolt type is easy to remove and use. [See More]
- Plunger Type: Ball Plunger
- Stroke: 0.0197 to 0.0984
- Thread Size: M4 x 0.7; M5 x 0.8; M6 x 1.0; M8 x 1.25; M10 x 1.5; M12 x 1.75; M16 x 2.0; Other Metric Thread; M3 x 0.5, M14 x 2.0
- End Force: 0.8820 to 22.05
from Carr Lane Manufacturing Co.
Self-contained ball-and-spring device available in many sizes and forces. Available in steel, stainless steel, or Delrin ®, all with a stainless steel ball. Locking element holds the unit securely in place after installation (steel and stainless only). Install and/or adjust from either end (when... [See More]
- Plunger Type: Ball Plunger
- Body: Delrin®
- Thread Size: 1/4-20; 5/16-18; 3/8-16
from Pivot Point, Inc.
Non-threaded Ball Plunger design push-fits into hole. Spring loaded ball detent forms a bearing surface which retracts and then snaps into opposing hole or groove. Push fit Ball Plungers are used for locating or positioning in drawers, doors, dies and other fixtures. Also known as Ball Detents,... [See More]
- Plunger Type: Ball Plunger
- Non-threaded: 0.2500
- Thread Size: 1/4-20; 1/4-28
- Stroke: 0.4710
from Te-Co, Inc.
Product Information. Material: Steel Body: 12L14Steel. Stainless Steel Body: 303 Stainless Steel. Ball: 440 Stainless Steel or Nylon. Smallest and lightest spring loaded device. Side-load tolerant. Controlled end forces. Screwdriver installation. Many sizes conform to TCMAI standards. Steel Bodies... [See More]
- Plunger Type: Ball Plunger (Thread Locking Element)
- Body: Stainless Steel
- Thread Size: 1/2-13
- Ball / Plunger: Stainless Steel
from Reid Supply
Used for locating, positioning, indexing and securing. Our Index Plungers allow for rapid adjustments on a variety of platforms, fixtures and tables.Suitable for gym equipment, medical aids, catering equipment, conveyors etc.Comes with Threaded and No Thread Locking Element. . SL-11N features a 1-8... [See More]
- Plunger Type: Ball Plunger
- End Force: 16
- Thread Size: 1-8; 1-8
- Body: Steel
from NBK America LLC
Cost-effective ball plunger. Light load, heavy load and super heavy load types with and without vibration resistant treatment are available. The main body, ball and spring are made of stainless steel. We also produce products of special specifications, e.g. dimensions, load and materials.Plungers :... [See More]
- Plunger Type: Ball Plunger
- Stroke: 0.0472
- Thread Size: M10 x 1.5
- End Force: 5.28
from BNB INT. Co., Ltd.
It is generally used with a control lever to determine a certain position, absorb the vibration of an object, or. reduce vibration and noise. It is widely applied to different devices. [See More]
- Plunger Type: Ball Plunger
- Stroke: 0.0315 to 0.0945
- Non-threaded: 0.1811 to 0.4173
- End Force: 1.54 to 220
from Carr Lane Manufacturing Co.
Self-contained ball-and-spring device available in many sizes and forces. Available in stainless steel or Delrin ®, both with a Delrin ® ball. Locking element (steel and stainless only) holds the unit securely in place after installation. Install and/or adjust from either end (when using the... [See More]
- Plunger Type: Ball Plunger
- Body: Delrin®
- Thread Size: 1/4-20; 5/16-18; 3/8-16
- Ball / Plunger: Delrin®
from Te-Co, Inc.
Product Information. Material: Steel Body: 12L14Steel. Stainless Steel Body: 303 Stainless Steel. Ball: 440 Stainless Steel or Nylon. Smallest and lightest spring loaded device. Side-load tolerant. Controlled end forces. Screwdriver installation. Many sizes conform to TCMAI standards. Steel Bodies... [See More]
- Plunger Type: Ball Plunger (Thread Locking Element)
- Body: Steel
- Thread Size: 1/2-13
- Ball / Plunger: Plastic; Nylon Ball
from Reid Supply
Used for locating, positioning, indexing and securing. Our Index Plungers allow for rapid adjustments on a variety of platforms, fixtures and tables.Suitable for gym equipment, medical aids, catering equipment, conveyors etc.Comes with Threaded and No Thread Locking Element. . LTP-1-45 features a... [See More]
- Plunger Type: Ball Plunger
- End Force: 16
- Thread Size: 1-8; 1-8
- Body: Steel
from NBK America LLC
Insert a spacer between the ball and spring (Except for M2 / M3). The ball rotates. With nylon lock for vibration resistant treatment (Except for M2/ M3 / M4). We also produce products of special specifications, e.g. dimensions, load and materials. Plungers : Related Information. Main body materials... [See More]
- Plunger Type: Ball Plunger (Thread Locking Element)
- Stroke: 0.0472
- Thread Size: M10 x 1.5
- End Force: 1.98
from BNB INT. Co., Ltd.
Customizable Design and Production. Ball plungers are widely used on industrial sites. Customizable products are ready for different environments, such as high working temperature, corrosion resistance,. high vibration, protection for mating parts, and adjustable material and spring pressure. [See More]
- Plunger Type: Ball Plunger
from Carr Lane Manufacturing Co.
Simple, economical ball plunger ideal for installation in softer materials, such as aluminum, wood, or plastic. Use when a threaded hole would be impractical or when adjustment is not required. Sturdy shoulder provides a fixed seating position and positively resists detent force. Installation hole... [See More]
- Plunger Type: Ball Plunger
- Body: Stainless Steel
- Non-threaded: 0.1250 to 0.5000
- Ball / Plunger: Stainless Steel
from Te-Co, Inc.
Product Information. Material: Steel Body: 12L14Steel. Stainless Steel Body: 303 Stainless Steel. Ball: 440 Stainless Steel or Nylon. Smallest and lightest spring loaded device. Side-load tolerant. Controlled end forces. Screwdriver installation. Many sizes conform to TCMAI standards. Steel Bodies... [See More]
- Plunger Type: Ball Plunger (Thread Locking Element)
- Body: Steel
- Thread Size: 1/2-13
- Ball / Plunger: Stainless Steel
from Reid Supply
Used for locating, positioning, indexing and securing. Our Index Plungers allow for rapid adjustments on a variety of platforms, fixtures and tables.Suitable for gym equipment, medical aids, catering equipment, conveyors etc.Comes with Threaded and No Thread Locking Element. . DN-6N features a... [See More]
- Plunger Type: Ball Plunger
- End Force: 6.6
- Thread Size: 1/2-13; 1/2-13
- Body: Steel
from NBK America LLC
Insert a spacer between the ball and spring (Except for M2 / M3). The ball rotates. With nylon lock for vibration resistant treatment (Except for M2/ M3 / M4). We also produce products of special specifications, e.g. dimensions, load and materials. Plungers : Related Information. Main body materials... [See More]
- Plunger Type: Ball Plunger (Thread Locking Element)
- Stroke: 0.0472
- Thread Size: M10 x 1.5
- End Force: 4.27
from Carr Lane Manufacturing Co.
Simple, economical ball plunger ideal for installation in softer materials, such as aluminum, wood, or plastic. Use when a threaded hole would be impractical or when adjustment is not required. Sturdy shoulder provides a fixed seating position and positively resists detent force. Installation hole... [See More]
- Plunger Type: Ball Plunger
- Body: Steel
- Non-threaded: 0.1250 to 0.5000
- Ball / Plunger: Steel
from Te-Co, Inc.
Product Information. Material: Body: Stainless Steel. Plunger: Stainless Steel. Knob: Delrin. Contoured knob. Unified ANSI & metric threads. *No thread relief in 1/4-20 thread size. *No thread relief in M6 thread size. Initial End Forces = +/-50% Final End Forces = +/-25% [See More]
- Plunger Type: Ball Plunger (Retractable, Thread Locking Element)
- Body: Stainless Steel
- Thread Size: 1/2-13
from Reid Supply
Used for locating, positioning, indexing and securing. Our Index Plungers allow for rapid adjustments on a variety of platforms, fixtures and tables.Suitable for gym equipment, medical aids, catering equipment, conveyors etc.Comes with Threaded and No Thread Locking Element. . LDN-6N features a... [See More]
- Plunger Type: Ball Plunger
- End Force: 2.7
- Thread Size: 1/2-13; 1/2-13
- Body: Steel
from NBK America LLC
Cost-effective ball plunger. Light load, heavy load and super heavy load types with and without vibration resistant treatment are available. We also produce products of special specifications, e.g. dimensions, load and materials.Plungers : Related Information. Load types and with / without vibration... [See More]
- Plunger Type: Ball Plunger
- Stroke: 0.0472
- Thread Size: M10 x 1.5
- End Force: 5.28
from Carr Lane Manufacturing Co.
Simple, economical ball plunger ideal for installation in softer materials, such as aluminum, wood, or plastic. Use when a threaded hole would be impractical or when adjustment is not required. Sturdy shoulder provides a fixed seating position and positively resists detent force. Installation hole... [See More]
- Plunger Type: Ball Plunger
- Body: Stainless Steel
- Non-threaded: 0.1250 to 0.5000
- Ball / Plunger: Delrin®
from Te-Co, Inc.
Product Information. Material: Body: Stainless Steel. Plunger: Stainless Steel. Knob: Delrin. Contoured knob. Unified ANSI & metric threads. Ideal for food and medical applications. *No thread relief in 1/4-20 thread size. *No thread relief in M6 thread size. Initial End Forces = +/-50% Final End... [See More]
- Plunger Type: Ball Plunger (Retractable, Thread Locking Element)
- Body: Stainless Steel
- Thread Size: 1/2-13
from Reid Supply
Used for locating, positioning, indexing and securing. Our Index Plungers allow for rapid adjustments on a variety of platforms, fixtures and tables.Suitable for gym equipment, medical aids, catering equipment, conveyors etc.Comes with Threaded and No Thread Locking Element. . LNK6-N features a... [See More]
- Plunger Type: Ball Plunger
- End Force: 1.75
- Thread Size: 1/2-13; 1/2-13
- Body: Steel
from Carr Lane Manufacturing Co.
Simple, economical ball plunger ideal for installation in softer materials, such as aluminum, wood, or plastic. Use when a threaded hole would be impractical or when adjustment is not required. Sturdy shoulder provides a fixed seating position and positively resists detent force. Installation hole... [See More]
- Plunger Type: Ball Plunger
- Body: Steel
- Non-threaded: 0.1250 to 0.5000
- Ball / Plunger: Delrin®
from Te-Co, Inc.
Product Information. Material: Steel, Black Oxide Finish. Ideal for tough, high-speed, long-life product applications. Flat, hexagonal nose design. Easy access and adjustment. Long spring life [See More]
- Plunger Type: Ball Plunger (Thread Locking Element)
- Thread Size: 1/2-13
from Reid Supply
Used for locating, positioning, indexing and securing. Our Index Plungers allow for rapid adjustments on a variety of platforms, fixtures and tables.Suitable for gym equipment, medical aids, catering equipment, conveyors etc.Comes with Threaded and No Thread Locking Element. . NSP-30N features a... [See More]
- Plunger Type: Ball Plunger
- End Force: 3.5
- Thread Size: 1/2-13; 1/2-13
- Body: Stainless Steel; Stainless Steel
from Carr Lane Manufacturing Co.
Self-contained ball-and-spring device available in many sizes and forces. Available in steel, stainless steel, or Delrin ®, all with a stainless steel ball. Locking element holds the unit securely in place after installation (steel and stainless only). Install and/or adjust from either end (when... [See More]
- Plunger Type: Ball Plunger (Thread Locking Element)
- Body: Stainless Steel
- Thread Size: #4-48; #6-40; #8-32; #8-36; #10-32; 1/4-20; 5/16-18; 3/8-16; 1/2-13; 5/8-11; Other English Thread; M4 x 0.7; M5 x 0.8; M6 x 1.0; M8 x 1.25; M10 x 1.5; M12 x 1.75; M16 x 2.0; Other Metric Thread; M3
- Ball / Plunger: Stainless Steel
from Te-Co, Inc.
Product Information. Material: Steel, Black Oxide Finish. Case hardened plunger. Black Oxide Finish. Hexagonal nose design allows for easy installation/removal with socket wrench [See More]
- Plunger Type: Ball Plunger (Thread Locking Element)
- Thread Size: 1-8
from Reid Supply
Used for locating, positioning, indexing and securing. Our Index Plungers allow for rapid adjustments on a variety of platforms, fixtures and tables.Suitable for gym equipment, medical aids, catering equipment, conveyors etc.Comes with Threaded and No Thread Locking Element. . SDH-8N features a... [See More]
- Plunger Type: Ball Plunger
- End Force: 6.6
- Thread Size: 1/2-13; 1/2-13
- Body: Stainless Steel; Stainless Steel
from Carr Lane Manufacturing Co.
Self-contained ball-and-spring device available in many sizes and forces. Available in stainless steel or Delrin ®, both with a Delrin ® ball. Locking element (steel and stainless only) holds the unit securely in place after installation. Install and/or adjust from either end (when using the... [See More]
- Plunger Type: Ball Plunger (Thread Locking Element)
- Body: Stainless Steel
- Thread Size: #4-48; #6-40; #8-32; #8-36; #10-32; 1/4-20; 5/16-18; 3/8-16; 1/2-13; 5/8-11; Other English Thread; M4 x 0.7; M5 x 0.8; M6 x 1.0; M8 x 1.25; M10 x 1.5; M12 x 1.75; M16 x 2.0; Other Metric Thread; M3
- Ball / Plunger: Delrin®
from Te-Co, Inc.
Product Information. Material: Steel. Ideal for high-speed, long-life applications. Hexagonal nose design. Easy insertion, adjustment or removal [See More]
- Plunger Type: Ball Plunger (Thread Locking Element)
- Thread Size: 1-8
from Reid Supply
Used for locating, positioning, indexing and securing. Our Index Plungers allow for rapid adjustments on a variety of platforms, fixtures and tables.Suitable for gym equipment, medical aids, catering equipment, conveyors etc.Comes with Threaded and No Thread Locking Element. . DN-6 features a 1/2-13... [See More]
- Plunger Type: Ball Plunger
- End Force: 6.6
- Thread Size: 1/2-13; 1/2-13
- Body: Steel
from Carr Lane Manufacturing Co.
Self-contained ball-and-spring device available in many sizes and forces. Available in steel, stainless steel, or Delrin ®, all with a stainless steel ball. Locking element holds the unit securely in place after installation (steel and stainless only). Install and/or adjust from either end (when... [See More]
- Plunger Type: Ball Plunger (Thread Locking Element)
- Body: Steel
- Thread Size: #4-48; #6-40; #8-32; #8-36; #10-32; 1/4-20; 5/16-18; 3/8-16; 1/2-13; 5/8-11; Other English Thread; M4 x 0.7; M5 x 0.8; M6 x 1.0; M8 x 1.25; M10 x 1.5; M12 x 1.75; M16 x 2.0; Other Metric Thread; M3
- Ball / Plunger: Steel
from Te-Co, Inc.
Product Information. Material: Steel Body: 12L14Steel. Stainless Steel Body: 303 Stainless Steel. Ball: 440 Stainless Steel or Nylon. Smallest and lightest spring loaded device. Side-load tolerant. Controlled end forces. Screwdriver installation. Many sizes conform to TCMAI standards. Steel Bodies... [See More]
- Plunger Type: Ball Plunger (Thread Locking Element)
- Body: Steel
- Thread Size: M10 x 1.5
- Ball / Plunger: Plastic; Nylon Ball
from Reid Supply
Used for locating, positioning, indexing and securing. Our Index Plungers allow for rapid adjustments on a variety of platforms, fixtures and tables.Suitable for gym equipment, medical aids, catering equipment, conveyors etc.Comes with Threaded and No Thread Locking Element. . LDN-6 features a... [See More]
- Plunger Type: Ball Plunger
- End Force: 2.7
- Thread Size: 1/2-13; 1/2-13
- Body: Steel
from Te-Co, Inc.
Product Information. Material: Steel Body: 12L14Steel. Stainless Steel Body: 303 Stainless Steel. Ball: 440 Stainless Steel or Nylon. Smallest and lightest spring loaded device. Side-load tolerant. Controlled end forces. Screwdriver installation. Many sizes conform to TCMAI standards. Steel Bodies... [See More]
- Plunger Type: Ball Plunger (Thread Locking Element)
- Body: Steel
- Thread Size: M10 x 1.5
- Ball / Plunger: Stainless Steel
from Reid Supply
Used for locating, positioning, indexing and securing. Our Index Plungers allow for rapid adjustments on a variety of platforms, fixtures and tables.Suitable for gym equipment, medical aids, catering equipment, conveyors etc.Comes with Threaded and No Thread Locking Element. . LNK-6 features a... [See More]
- Plunger Type: Ball Plunger
- End Force: 1.75
- Thread Size: 1/2-13; 1/2-13
- Body: Steel
from Te-Co, Inc.
Product Information. Designed to eliminate excessive spring compression during installation and removal of spring and ball plungers [See More]
- Plunger Type: Ball Plunger
- Thread Size: 1-8
from Reid Supply
Used for locating, positioning, indexing and securing. Our Index Plungers allow for rapid adjustments on a variety of platforms, fixtures and tables.Suitable for gym equipment, medical aids, catering equipment, conveyors etc.Comes with Threaded and No Thread Locking Element. . SDH-8 features a... [See More]
- Plunger Type: Ball Plunger
- End Force: 6.6
- Thread Size: 1/2-13; 1/2-13
- Body: Stainless Steel; Stainless Steel
from Te-Co, Inc.
Product Information. Material: Steel Body: 12L14 Steel. Stainless Steel Body: 303 Stainless Steel. Steel Plunger: 12L14 Steel, Case Hardened. Stainless Steel Plunger: 303 Stainless Steel. Black Oxide Finish. Easy installation and removal. Withstands high torque. One-piece body - no set screw in... [See More]
- Plunger Type: Ball Plunger; Spring Plunger (Thread Locking Element)
- Body: Stainless Steel
- Thread Size: 1/4-20
from Reid Supply
Used for locating, positioning, indexing and securing. Our Index Plungers allow for rapid adjustments on a variety of platforms, fixtures and tables.Suitable for gym equipment, medical aids, catering equipment, conveyors etc.Comes with Threaded and No Thread Locking Element. . W-74N features a... [See More]
- Plunger Type: Ball Plunger
- End Force: 3
- Thread Size: 1/2-13; 1/2-13
- Body: Steel
from Te-Co, Inc.
Product Information. Material: Steel Body: 12L14 Steel. Stainless Steel Body: 303 Stainless Steel. Ball:440 Stainless Steel. Black Oxide Finish - Steel Only. Ideal for installation in softer materials, such as aluminum, wood or plastic. Sturdy shoulder provides a fixed seating position and... [See More]
- Plunger Type: Ball Plunger; Press Fit Plunger
- Ball / Plunger: Plastic; Nylon Ball
- Body: Stainless Steel
from Reid Supply
Used for locating, positioning, indexing and securing. Our Index Plungers allow for rapid adjustments on a variety of platforms, fixtures and tables.Suitable for gym equipment, medical aids, catering equipment, conveyors etc.Comes with Threaded and No Thread Locking Element. . W-76N features a... [See More]
- Plunger Type: Ball Plunger
- End Force: 6
- Thread Size: 1/2-13; 1/2-13
- Body: Steel
from Te-Co, Inc.
Product Information. Material: Steel Body: 12L14 Steel. Stainless Steel Body: 303 Stainless Steel. Ball:440 Stainless Steel. Black Oxide Finish - Steel Only. Ideal for installation in softer materials, such as aluminum, wood or plastic. Sturdy shoulder provides a fixed seating position and... [See More]
- Plunger Type: Ball Plunger; Press Fit Plunger
- Ball / Plunger: Stainless Steel
- Body: Stainless Steel
from Reid Supply
Used for locating, positioning, indexing and securing. Our Index Plungers allow for rapid adjustments on a variety of platforms, fixtures and tables.Suitable for gym equipment, medical aids, catering equipment, conveyors etc.Comes with Threaded and No Thread Locking Element. . W-78N features a... [See More]
- Plunger Type: Ball Plunger
- End Force: 6
- Thread Size: 1/2-13; 1/2-13
- Body: Steel
from Te-Co, Inc.
Product Information. Material: Steel Body: 12L14 Steel. Stainless Steel Body: 303 Stainless Steel. Ball:440 Stainless Steel. Black Oxide Finish - Steel Only. Ideal for installation in softer materials, such as aluminum, wood or plastic. Sturdy shoulder provides a fixed seating position and... [See More]
- Plunger Type: Ball Plunger; Press Fit Plunger
- Ball / Plunger: Plastic; Nylon Ball
- Body: Steel
from Reid Supply
Used for locating, positioning, indexing and securing. Our Index Plungers allow for rapid adjustments on a variety of platforms, fixtures and tables.Suitable for gym equipment, medical aids, catering equipment, conveyors etc.Comes with Threaded and No Thread Locking Element. . Y-20N features a... [See More]
- Plunger Type: Ball Plunger
- End Force: 6
- Thread Size: 1/2-13; 1/2-13
- Body: Stainless Steel; Stainless Steel
from Te-Co, Inc.
Product Information. Designed for applications where space is limited. Plunger can be completely withdrawn into the body and locked into a retracted position. Chamfered plunger for easy alignment. *Black Oxide. **Zinc Plated Clear Chromate Finish [See More]
- Plunger Type: Pull Ring Plunger; Ball Plunger (Retractable, Thread Locking Element)
- Thread Size: 1/2-13
from Reid Supply
Used for locating, positioning, indexing and securing. Our Index Plungers allow for rapid adjustments on a variety of platforms, fixtures and tables.Suitable for gym equipment, medical aids, catering equipment, conveyors etc.Comes with Threaded and No Thread Locking Element. . W-76 features a 1/2-13... [See More]
- Plunger Type: Ball Plunger
- End Force: 6
- Thread Size: 1/2-13; 1/2-13
- Body: Steel
from Te-Co, Inc.
Product Information. Material: Body: Aluminum. Nose: Steel. Part Nos. 53100 and 53103 have triangular bodies. Part Nos. 53101, 53102, 53104 and 53105 have squared bodies as denoted by phantom line drawing. Two nose styles available: 53100-53102: Square Nose. 53103-53105: Round Button Nose. Ideal for... [See More]
- Plunger Type: Ball Plunger
from Reid Supply
Used for locating, positioning, indexing and securing. Our Index Plungers allow for rapid adjustments on a variety of platforms, fixtures and tables.Suitable for gym equipment, medical aids, catering equipment, conveyors etc.Comes with Threaded and No Thread Locking Element. . KBP-414 features a... [See More]
- Plunger Type: Ball Plunger
- End Force: 2.25
- Thread Size: 1/2-13; 1/2-13
- Body: Steel
from Te-Co, Inc.
Product Information. The ideal mating detent for ball plungers or other similar applications. Hardened and ground - 440C stainless steel. [See More]
- Plunger Type: Ball Plunger
- Ball / Plunger: Stainless Steel
from Reid Supply
Used for locating, positioning, indexing and securing. Our Index Plungers allow for rapid adjustments on a variety of platforms, fixtures and tables.Suitable for gym equipment, medical aids, catering equipment, conveyors etc.Comes with Threaded and No Thread Locking Element. . KBP-51 features a... [See More]
- Plunger Type: Ball Plunger
- End Force: 2.25
- Thread Size: 1/2-13; 1/2-13
- Body: Stainless Steel; Stainless Steel
from Te-Co, Inc.
Product Information. Designed for applications where space is limited. Fully retractable plunger. Chamfered plunger for easy alignment. Zinc Plated Clear Chromate finish. *No thread relief in 1/4-20 thread size [See More]
- Plunger Type: Ball Plunger (Retractable, Thread Locking Element)
- Thread Size: 1/2-13
from Reid Supply
Used for locating, positioning, indexing and securing. Our Index Plungers allow for rapid adjustments on a variety of platforms, fixtures and tables.Suitable for gym equipment, medical aids, catering equipment, conveyors etc.Comes with Threaded and No Thread Locking Element. . KBP-77 features a... [See More]
- Plunger Type: Ball Plunger
- End Force: 1.12
- Thread Size: 1/2-13; 1/2-13
- Body: Steel
from Te-Co, Inc.
Product Information. Designed for applications where space is limited. Fully retractable plunger. Chamfered plunger for easy alignment. Zinc Plated Clear Chromate finish. *No thread relief in 1/4-20 thread size [See More]
- Plunger Type: Ball Plunger (Retractable, Thread Locking Element)
- Thread Size: 1/2-13
from Reid Supply
Used for locating, positioning, indexing and securing. Our Index Plungers allow for rapid adjustments on a variety of platforms, fixtures and tables.Suitable for gym equipment, medical aids, catering equipment, conveyors etc.Comes with Threaded and No Thread Locking Element. . LPN-6N features a... [See More]
- Plunger Type: Ball Plunger
- End Force: 6.6
- Thread Size: 1/2-13; 1/2-13
- Body: Steel
from Te-Co, Inc.
Product Information. Designed for applications where space is limited. Chamfered plunger for easy alignment. Withstands side loading. *No thread relief. **Zinc Plated Clear Chromate Finish [See More]
- Plunger Type: Pull Ring Plunger; Ball Plunger (Retractable, Thread Locking Element)
- Body: Stainless Steel
- Thread Size: 1/2-13
from Reid Supply
Used for locating, positioning, indexing and securing. Our Index Plungers allow for rapid adjustments on a variety of platforms, fixtures and tables.Suitable for gym equipment, medical aids, catering equipment, conveyors etc.Comes with Threaded and No Thread Locking Element. . PN-6 features a 1/2-13... [See More]
- Plunger Type: Ball Plunger
- End Force: 6.6
- Thread Size: 1/2-13; 1/2-13
- Body: Steel
from Reid Supply
Used for locating, positioning, indexing and securing. Our Index Plungers allow for rapid adjustments on a variety of platforms, fixtures and tables.Suitable for gym equipment, medical aids, catering equipment, conveyors etc.Comes with Threaded and No Thread Locking Element. . K6-SN features a... [See More]
- Plunger Type: Ball Plunger
- End Force: 5
- Thread Size: 1/2-13; 1/2-13
- Body: Stainless Steel; Stainless Steel
from Reid Supply
Used for locating, positioning, indexing and securing. Our Index Plungers allow for rapid adjustments on a variety of platforms, fixtures and tables.Suitable for gym equipment, medical aids, catering equipment, conveyors etc.Comes with Threaded and No Thread Locking Element. . KBP-109 features a... [See More]
- Plunger Type: Ball Plunger
- End Force: 6.74
- Thread Size: 1/2-13; 1/2-13
- Body: Stainless Steel; Stainless Steel
from Reid Supply
Used for locating, positioning, indexing and securing. Our Index Plungers allow for rapid adjustments on a variety of platforms, fixtures and tables.Suitable for gym equipment, medical aids, catering equipment, conveyors etc.Comes with Threaded and No Thread Locking Element. . KBP-141 features a... [See More]
- Plunger Type: Ball Plunger
- End Force: 1.12
- Thread Size: 1/2-13; 1/2-13
- Body: Stainless Steel; Stainless Steel