Niobium / Niobium Alloy Refractory and Reactive Metals
from Ed Fagan, Inc.
Niobium, also termed Columbium, is a shiny grey metal that takes on a bluish tinge when exposed to air at room temperature. Due to its low capture cross section for thermal neutrons, Niobium has application in the nuclear industry. Niobium can be electrically heated and anodized to a wide variety of... [See More]
- Metal / Alloy Type: Niobium / Niobium Alloy; Alloy
- Shape / Form: Semi-finished, Mill Stock or Near Net Shapes; Coil Stock (optional feature); Foil (optional feature)
- Specifications: ASTM / ASME; AMS 7850
- Thickness: 0.0050 to 0.0100
from Plansee SE
In high-pressure sodium vapor lamps and ceramic metal halide lamps, the electrical discharge takes place in ceramic vessels - the so-called burners. Niobium pins are a key component that ensures the flow of electricity in these lamps. Niobium has approximately the same thermal expansion as the... [See More]
- Metal / Alloy Type: Niobium / Niobium Alloy
- Shape / Form: Pins
from Ulbrich Stainless Steels & Special Metals, Inc.
Strip, Coil, Foil, Wire, ASTM B393. NIOB1 (TYPE 1 REACTOR GRADE UNALLOYED) NIOB2 (TYPE 2 COMMERCIAL GRADE UNALLOYED). APPLICATIONS. Type 1 and Type 2: Used in jewelry, super-abrasives, thin film deposition (glass), high-energy physics, springs and superconducting magnets for aerospace, consumer... [See More]
- Metal / Alloy Type: Niobium / Niobium Alloy; Pure or Very Low Alloy
- Specifications: UNS; ASTM / ASME
- UNS R Number: 4210
- Shape / Form: Semi-finished, Mill Stock or Near Net Shapes; Coil Stock; Foil; Wire; Coil - Strip, Foil, Ribbon; Wire - Profile, Round, Flat, Square; Strip
from Leading Edge Metals & Alloys, Inc.
Niobium (also known as columbium) is a shiny, ductile metal primarily used in alloys. It improves the properties of steel and is often used in gas pipelines, jet engines and structural applications. Because of its corrosion resistance and ability to perform at high temperatures, niobium metal... [See More]
- Metal / Alloy Type: Niobium / Niobium Alloy; Alloy
- Thickness: 1.00E-3 to 2
- Shape / Form: Semi-finished, Mill Stock or Near Net Shapes (optional feature); Bar Stock (optional feature); Plate (optional feature); Wire (optional feature); Sheet (optional feature)
- Width / OD: 12 to 24
from Plansee SE
PLANSEE offers a wide range of ribbons made of refractory metals and their alloys made of highly pure raw materials. Ribbons are available in thicknesses between 15 µm and 0.76 mm and widths between 1 mm and 360 mm. Ribbons made of tungsten and tantalum are availble directly from the... [See More]
- Metal / Alloy Type: Niobium / Niobium Alloy
- Shape / Form: Semi-finished, Mill Stock or Near Net Shapes; Strip