Chemical / Oil Resistant Floor Coatings
from FORREST Technical Coatings
A corrosion-resistant polyamide epoxy primer for use under high performance fast-dry topcoats. [See More]
- Features: Chemical Resistant; Corrosion Resistant; Protective; Touch-Up; Abrasion, Erosion or Wear Resistant
- Cure / Setting Technology: Film Drying; Multicomponent
- Type: Coating; Paint
- Substrate: Concrete; Metallic; Steel
from FORREST Technical Coatings
FORREST two-part epoxy coatings provide excellent solvent and corrosion resistance for industrial applications. Ideal for areas where a higher level of performance is required for chemical or solvent exposure. [See More]
- Features: Chemical Resistant; Corrosion Resistant; Protective; Touch-Up; Abrasion, Erosion or Wear Resistant
- Cure / Setting Technology: Film Drying; Multicomponent
- Type: Coating; Paint
- Substrate: Concrete; Metallic; Steel
from FORREST Technical Coatings
A high-performance, two-part polyamide epoxy system formulated to protect surfaces exposed to chemicals, solvents or abrasion. Suitable for application on new equipment, structural steel and concrete. Available in non-skid for floor applications. [See More]
- Features: Chemical Resistant; Corrosion Resistant; Protective; Touch-Up; Abrasion, Erosion or Wear Resistant
- Cure / Setting Technology: Film Drying; Multicomponent
- Type: Coating; Paint
- Substrate: Concrete; Metallic; Steel
from FORREST Technical Coatings
A two-component, specially-modified, polyamide-cured, high-build epoxy primer providing a very fast-dry topcoat and excellent resistance to corrosive and abrasive environments. Less than 2.8 lbs/gallon VOCs. [See More]
- Features: Chemical Resistant; Corrosion Resistant; Protective; Touch-Up; Abrasion, Erosion or Wear Resistant
- Cure / Setting Technology: Film Drying; Multicomponent
- Type: Coating; Paint
- Substrate: Concrete; Metallic; Steel
from FORREST Technical Coatings
A two-component, high-solids, chemical and corrosion resistant modified polyamidoamine epoxy formulated for excellent protection in severe environments. This product uses a special modified polyamidoamine curing agent that imparts the best properties of both amines and conventional polyamides. [See More]
- Features: Chemical Resistant; Corrosion Resistant; Protective; Touch-Up; Abrasion, Erosion or Wear Resistant
- Cure / Setting Technology: Film Drying; Multicomponent
- Type: Coating; Paint
- Substrate: Concrete; Metallic; Steel
from Rust-Oleum Corporation
Acrylic aliphatic urethane, high gloss, two component, gloss retention [See More]
- Features: Chemical Resistant; Corrosion Resistant
- Cure / Setting Technology: Multicomponent
- Type: Coating; Enamel; Base Coat
- Substrate: Aluminum; Concrete; Metallic; Steel
from Sauereisen, Inc.
Arctikure No. 230 is a three-component epoxy monolithic floor system that is used to protect concrete and other substrates. from chemical and physical abuse. No. 230 is designed for cold room applications and will cure at temperatures as low as 35oF. Arctikure has the durability to withstand the... [See More]
- Features: Chemical Resistant; Heat Resistant; Protective; Cold Room Applications, Skid Resistant
- Cure / Setting Technology: Film Drying; Multicomponent
- Type: Coating
- Substrate: Concrete
from Sherwin-Williams Protective & Marine Coatings
ArmorSeal ®1000 HS is a high solids, heavy duty, two-component, catalyzed, polyamide epoxy coating formulated for demanding marine and industrial requirements. This dries rapidly to a tough, high gloss finish with excellent resistance to alkalies, abrasion, corrosion, and chemical attack. [See More]
- Features: Chemical Resistant; Corrosion Resistant
- Cure / Setting Technology: Multicomponent
- Type: Coating
- Substrate: Concrete; Steel; Wood
from Rust-Oleum Corporation
Multi-purpose oil modified alkyd enamel, light abrasion resistance [See More]
- Features: Chemical Resistant; Abrasion, Erosion or Wear Resistant
- Cure / Setting Technology: Film Drying
- Type: Paint; Enamel; Base Coat
- Substrate: Steel
from Sherwin-Williams Protective & Marine Coatings
ArmorSeal ®1K Waterbased Urethane Floor Enamel is a gloss, high performance, one component polyester waterbased urethane, formulated specifically for industrial floor applications. Provides outstanding abrasion resistance, good chemical resistance, with excellent color and gloss retention. Fast... [See More]
- Features: Chemical Resistant; Heat Resistant; Resistant to "Hot Tire" Pick-Up
- Substrate: Concrete
- Type: Coating; Enamel
- Coating Material: Polyurethane; Resin; Water
from Rust-Oleum Corporation
Anti-slip floor coating, extra heavy vehicle grade, 100% solids, low odor [See More]
- Features: Chemical Resistant
- Cure / Setting Technology: Multicomponent
- Type: Coating; Paint
- Substrate: Concrete; Metallic
from Sherwin-Williams Protective & Marine Coatings
ArmorSeal ®33 EPOXY PRIMER/SEALER is a low viscosity, 100% solids, high build, fast cure, epoxy primer designed for use under ArmorSeal ®650 or where a high build primer is needed. This primer/sealer enhances adhesion by penetrating into the concrete substrate and helps reduce bubbling and... [See More]
- Features: Chemical Resistant; Heat Resistant; Fast Dry, Low Odor
- Cure / Setting Technology: Multicomponent
- Type: Coating; Primer; Sealer
- Substrate: Concrete; Wood
from Rust-Oleum Corporation
Three component, epoxy resin polymer, brightly colored quartz aggregate [See More]
- Features: Chemical Resistant; Flame Retardant / UL 94V-0 Rated
- Cure / Setting Technology: Multicomponent
- Type: Coating; Clear Coat
- Substrate: Concrete
from Sherwin-Williams Protective & Marine Coatings
ArmorSeal ®FLOOR-PLEX 7100 is a heavy duty, interior, VOC compliant, low odor, two component, catalyzed, water borne, polyamide epoxy floor coating. This dries rapidly to an extra tough, gloss finish which will withstand heavy industrial traffic, abrasion, and general chemical attack. Provides... [See More]
- Features: Chemical Resistant; Heat Resistant; Resists Yellowing, Low Odor
- Cure / Setting Technology: Multicomponent
- Type: Coating; Clear Coat
- Substrate: Concrete
from Rust-Oleum Corporation
Heavy duty static control floor topping, 3 component epoxy resin polymer [See More]
- Features: Anti-Static; Chemical Resistant; Flame Retardant / UL 94V-0 Rated
- Cure / Setting Technology: Multicomponent
- Type: Coating; Clear Coat; Sealer
- Substrate: Concrete
from Sherwin-Williams Protective & Marine Coatings
ArmorSeal ®HS POLYURETHANE FLOOR ENAMEL is a heavy duty, two component, exterior/interior, low VOC, high solids, polyester-aliphatic urethane industrial floor coating. Provides a high gloss, excellent chemical resistance, color retention, and chalk resistance. Outstanding resistance a wide... [See More]
- Features: Chemical Resistant; Heat Resistant; Humidity & Solvent Resistance
- Cure / Setting Technology: Multicomponent
- Type: Coating; Enamel
- Substrate: Concrete; Steel; Other; Iron
from Rust-Oleum Corporation
Two component, water based epoxy coating, low risk of flammability [See More]
- Features: Chemical Resistant; Abrasion, Erosion or Wear Resistant
- Cure / Setting Technology: Multicomponent
- Type: Coating
- Substrate: Concrete
from Sherwin-Williams Protective & Marine Coatings
ArmorSeal ®REXTHANE I FLOOR COATING is a high solids, single component, aliphatic, moisture cure urethane, VOC complying, moisture resistant industrial floor coating. This urethane coating cures to a high gloss and chemical resistant film equivalent to two-part urethane coatings. Impact and... [See More]
- Features: Chemical Resistant; Moisture & Yellowing Resistance
- Cure / Setting Technology: Film Drying; Reactive or Moisture Cured
- Type: Coating; Clear Coat
- Substrate: Concrete; Steel; Wood; Other; Metalizing, Steel with Zinc
from Rust-Oleum Corporation
Two component, low odor, low VOC, 100% solids epoxy floor coating [See More]
- Features: Chemical Resistant; Abrasion, Erosion or Wear Resistant
- Cure / Setting Technology: Multicomponent
- Type: Coating; Base Coat
- Substrate: Concrete
from Sherwin-Williams Protective & Marine Coatings
ArmorSeal ®TREAD-PLEX PRIMER is a general purpose, interior/exterior, VOC compliant, 100% acrylic, low odor, waterborne primer. One component. Water clean up. Fast dry. RECOMMENDED USAGE. For use over prepared concrete and wood floors, steps, stairwells, aisleways, or previously painted floor... [See More]
- Features: Chemical Resistant; Heat Resistant; HAPS Free, Fast Dry, Low Odor
- Substrate: Concrete; Wood
- Type: Coating; Primer
- Coating Material: Acrylic; Resin; Water
from Rust-Oleum Corporation
General purpose modified alkyd primer designed for interior or exterior use [See More]
- Features: Chemical Resistant; Abrasion, Erosion or Wear Resistant; Weather Resistant
- Cure / Setting Technology: Film Drying
- Type: Paint; Enamel; Base Coat
- Substrate: Aluminum; Metallic; Steel
from Sherwin-Williams Protective & Marine Coatings
ArmorSeal ®TREAD-PLEX is a general purpose, interior/ exterior, VOC compliant, 100% acrylic, low odor, waterborne floor coating. This dries rapidly to a tough, alkali resistant finish which will withstand hard wear, abrasion, grease, oils, and cleaning equipment. One component. Water clean up. [See More]
- Features: Chemical Resistant; Heat Resistant; Abrasion, Erosion or Wear Resistant; Humidity & Scrub Resistance
- Substrate: Concrete; Wood
- Type: Coating; Clear Coat
- Coating Material: Acrylic; Resin; Water
from Rust-Oleum Corporation
Industrial performance, zero VOC, zero HAP, odorless, two component [See More]
- Features: Chemical Resistant; Corrosion Resistant
- Cure / Setting Technology: Multicomponent
- Type: Coating; Paint; Enamel; Base Coat
- Substrate: Concrete
from Sherwin-Williams Protective & Marine Coatings
General Polymers AIRCRAFT HANGAR / INDUSTRIAL PLANT COATING is designed to provide a thin-mil, light reflective, and chemical resistant finish. Advantages. Excellent gloss retention. UV color stability. Chemical and stain resistant. Resists common acids, fuels grease, salt and Skydrol. Uses. [See More]
- Features: Chemical Resistant
- Cure / Setting Technology: Film Drying; Multicomponent
- Type: Coating
- Substrate: Concrete; Wood; Other; Quarry Tile
from Rust-Oleum Corporation
Industrial performance, zero VOC, zero HAP, odorless, two component [See More]
- Features: Chemical Resistant; Corrosion Resistant
- Cure / Setting Technology: Multicomponent
- Type: Coating; Paint; Enamel; Base Coat
- Substrate: Concrete
from Sherwin-Williams Protective & Marine Coatings
General Polymers AquArmor “C ” Coating Systems is a 2-3 coat flooring system using a revolutionary new water-based resin technology, AquArmor WBE. It is installed quickly, environmentally friendly and is resistant to problems associated with moisture from the concrete. Advantages. No... [See More]
- Features: Chemical Resistant
- Cure / Setting Technology: Film Drying; Multicomponent
- Type: Coating
- Substrate: Concrete; Wood; Other; Quarry Tile
from Sherwin-Williams Protective & Marine Coatings
General Polymers AquArmor Ceramic Carpet Decorative Flooring Systems combines the historical advantages of epoxy quartz flooring with integral protection against loss of bond due to moisture vapor issues for slabs on grade. Advantages. Withstands vapor emissons. Aesthetically pleasing appearance. [See More]
- Features: Chemical Resistant; Abrasion, Erosion or Wear Resistant
- Cure / Setting Technology: Film Drying; Multicomponent
- Type: Coating
- Substrate: Concrete; Wood; Other; Quarry Tile
from Sherwin-Williams Protective & Marine Coatings
General Polymers AquArmor MCS High Build Hangar Flooring System is designed to provide an 1/8" thick. high gloss, easy to maintain floor finish in a hangar or industrial environment. The unique AquArmor technology offers a fast, environmentally friendly installation that is not susceptible to... [See More]
- Features: Chemical Resistant
- Cure / Setting Technology: Film Drying; Multicomponent
- Type: Coating
- Substrate: Concrete; Wood; Other; Quarry Tile
from Sherwin-Williams Protective & Marine Coatings
General Polymers AquArmor S Slurry System represents a family of flooring systems all built using a single revolutionary new water-based resin technology, AquArmor WBE. System designs include a coating and a 1/16 ” to 1/8 ” slurry. All systems are installed quickly, environmentally... [See More]
- Features: Chemical Resistant
- Cure / Setting Technology: Film Drying; Multicomponent
- Type: Coating
- Substrate: Concrete; Wood; Other; Quarry Tile
from Sherwin-Williams Protective & Marine Coatings
General Polymers 4090TC FasTop Urethane Coating is a 3 part, low odor, matte finish, pigmented coating to be applied over the FasTop Urethane Systems. Coating may be applied using a hand trowel, flat squeegee or grout float to the desired thickness then back rolled with roller cover. Recommended... [See More]
- Features: Chemical Resistant; Abrasion, Erosion or Wear Resistant
- Cure / Setting Technology: Film Drying; Multicomponent
- Type: Coating
- Substrate: Concrete
from Sherwin-Williams Protective & Marine Coatings
General Polymers CERAMIC CARPET #400 is an 1/8 ” system which incorporates decorative colored quartz aggregates with high solids epoxy resins and chemical resistant grout and topycoats to form a protective surfacing system which is aesthetically pleasing, slip resistant, durable and resistant... [See More]
- Features: Chemical Resistant; Protective; Abrasion, Erosion or Wear Resistant
- Cure / Setting Technology: Film Drying; Multicomponent
- Type: Coating; Ceramic
- Substrate: Concrete; Wood; Other; Quarry Tile
from Sherwin-Williams Protective & Marine Coatings
General Polymers DECORATIVE MOSAIC WB COATING SYSTEM is a mosaic pattern floor covering. These vinyl chips are incorporated in a water-based epoxy and sealed with a clear coat of an abrasion resistant, water-based polyurethane that is available in a high gloss or satin finish. Its innovation base... [See More]
- Features: Chemical Resistant; Protective
- Cure / Setting Technology: Film Drying; Multicomponent
- Type: Coating
- Substrate: Concrete; Wood; Other; Quarry Tile
from Sherwin-Williams Protective & Marine Coatings
General Polymers TPM #115-U1 DECORATIVE TROWELED SYSTEM is a 3/16 ” protective resurfacing systems utilizing an epoxy and silica aggregates mortar, high build grout and seal coats and selected decorative aggregates where a heavy duty decorative flooring system is required. Advantages. Low VOC... [See More]
- Features: Chemical Resistant; Protective; Abrasion, Erosion or Wear Resistant
- Cure / Setting Technology: Film Drying; Multicomponent
- Type: Coating
- Substrate: Concrete; Wood; Other; Quarry Tile
from Sherwin-Williams Protective & Marine Coatings
FasTop CERAMIC CARPET SYSTEM is a decorative color quartz, low odor, self-leveling slurry with quartz broadcast to yield an 3/16 ” finished system. FasTop CERAMIC CARPET can be applied with a pin rake, screed rake or flat trowel. It is designed to provide a durable, yet, decorative seamless... [See More]
- Features: Chemical Resistant; Abrasion, Erosion or Wear Resistant
- Cure / Setting Technology: Film Drying; Multicomponent
- Type: Coating
- Substrate: Concrete; Wood; Other; Quarry Tile
from Sherwin-Williams Protective & Marine Coatings
General Polymers FasTop S URETHANE SLURRY SYSTEM is a self-leveling slurry to be applied at 3/16 ” thickness and broadcast to yield a 1/4 ” - 3/8 ” finished system. FasTop S can be applied with a pin rake, screed rake or flat trowel. It is designed to protect concrete, wood and... [See More]
- Features: Chemical Resistant; Corrosion Resistant; Protective; Abrasion, Erosion or Wear Resistant
- Cure / Setting Technology: Film Drying; Multicomponent
- Type: Coating
- Substrate: Concrete; Steel; Wood; Other; Quarry Tile
from Sherwin-Williams Protective & Marine Coatings
KEM ® Cati-Coat ® HS EPOXY FILLER/SEALER is a high performance, interior/exterior, VOC compliant, epoxy block filler. Designed for tenacious adhesion to masonry substrates while filling voids and crevices to smooth the surface. Excellent resistance to moisture, humidity, impact, and... [See More]
- Features: Chemical Resistant; Touch-Up; Abrasion, Erosion or Wear Resistant; Impact Resistance
- Cure / Setting Technology: Film Drying
- Type: Sealer
- Substrate: Concrete
from Sherwin-Williams Protective & Marine Coatings
General Polymers EPO-FLEX MER I (MECHANICAL EQUIPMENT ROOM) SYSTEM combines EPO-FLEX crack bridging and waterproofing capabilities with a chemically resistant topcoat and an optional wearcourse of EPO-FLEX broad- cast to excess with hard aggregate would provide increased wear, impact, and abrasion... [See More]
- Features: Chemical Resistant; Abrasion, Erosion or Wear Resistant
- Cure / Setting Technology: Film Drying; Multicomponent
- Type: Coating
- Substrate: Concrete; Wood; Other; Quarry Tile
from Sherwin-Williams Protective & Marine Coatings
Corothane ® I ALIPHATIC FINISH COAT is a single component, VOC compliant, moisture curing urethane designed for low temperature or high humidity applications while providing UV resistance and chemical resistance equivalent to two part urethane coatings. Low temperature application - down to 20... [See More]
- Features: Chemical Resistant; Corrosion Resistant; Heat Resistant; Protective; Weather Resistant; Excellent Resistance to Yellowing
- Cure / Setting Technology: Reactive or Moisture Cured; Thermoset
- Type: Coating; Clear Coat
- Substrate: Concrete; Metallic; Steel; Other; Iron