Wear Resistant (Abrasion / Erosion) Floor Coatings
from FORREST Technical Coatings
A corrosion-resistant polyamide epoxy primer for use under high performance fast-dry topcoats. [See More]
- Features: Chemical Resistant; Corrosion Resistant; Protective; Touch-Up; Abrasion, Erosion or Wear Resistant
- Cure / Setting Technology: Film Drying; Multicomponent
- Type: Coating; Paint
- Substrate: Concrete; Metallic; Steel
from FORREST Technical Coatings
FORREST two-part epoxy coatings provide excellent solvent and corrosion resistance for industrial applications. Ideal for areas where a higher level of performance is required for chemical or solvent exposure. [See More]
- Features: Chemical Resistant; Corrosion Resistant; Protective; Touch-Up; Abrasion, Erosion or Wear Resistant
- Cure / Setting Technology: Film Drying; Multicomponent
- Type: Coating; Paint
- Substrate: Concrete; Metallic; Steel
from FORREST Technical Coatings
A high-performance, two-part polyamide epoxy system formulated to protect surfaces exposed to chemicals, solvents or abrasion. Suitable for application on new equipment, structural steel and concrete. Available in non-skid for floor applications. [See More]
- Features: Chemical Resistant; Corrosion Resistant; Protective; Touch-Up; Abrasion, Erosion or Wear Resistant
- Cure / Setting Technology: Film Drying; Multicomponent
- Type: Coating; Paint
- Substrate: Concrete; Metallic; Steel
from FORREST Technical Coatings
A two-component, specially-modified, polyamide-cured, high-build epoxy primer providing a very fast-dry topcoat and excellent resistance to corrosive and abrasive environments. Less than 2.8 lbs/gallon VOCs. [See More]
- Features: Chemical Resistant; Corrosion Resistant; Protective; Touch-Up; Abrasion, Erosion or Wear Resistant
- Cure / Setting Technology: Film Drying; Multicomponent
- Type: Coating; Paint
- Substrate: Concrete; Metallic; Steel
from FORREST Technical Coatings
A two-component, high-solids, chemical and corrosion resistant modified polyamidoamine epoxy formulated for excellent protection in severe environments. This product uses a special modified polyamidoamine curing agent that imparts the best properties of both amines and conventional polyamides. [See More]
- Features: Chemical Resistant; Corrosion Resistant; Protective; Touch-Up; Abrasion, Erosion or Wear Resistant
- Cure / Setting Technology: Film Drying; Multicomponent
- Type: Coating; Paint
- Substrate: Concrete; Metallic; Steel
from Sauereisen, Inc.
The Sauereisen Hot-Applied Membrane System includes Primer No. 47 and Asphaltic Membrane No. 85. These products are installed as a system to form a flexible acid- alkali-, and water-resistant barrier between acid brick or monolithic sheathing and concrete substrates. Benefits of the Asphaltic... [See More]
- Features: Chemical Resistant; Protective; Abrasion, Erosion or Wear Resistant
- Substrate: Concrete
- Type: Coating
- Coating Material: Asphalt
from Sherwin-Williams Protective & Marine Coatings
ArmorSeal ®650 SL/RC self-leveling, recoatable epoxy is a two-component, heavy duty floor system that provides a high gloss, seamless, hygienic surface that is extremely hard wearing and durable. The coating can also be applied to provide a nonslip texture. This product may be topcoated if... [See More]
- Features: Chemical Resistant; Heat Resistant; Abrasion, Erosion or Wear Resistant; Solvent Resistant
- Cure / Setting Technology: Multicomponent; Thermoset
- Type: Coating; Clear Coat
- Substrate: Concrete; Steel; Other; Iron
from Rust-Oleum Corporation
Multi-purpose oil modified alkyd enamel, light abrasion resistance [See More]
- Features: Chemical Resistant; Abrasion, Erosion or Wear Resistant
- Cure / Setting Technology: Film Drying
- Type: Paint; Enamel; Base Coat
- Substrate: Steel
from All-Spec Industries
The All-Spec CP100G-1 is a conductive formulation that has a water based coating manufactured with high quality acrylic latex and waterborne urethane. Produced to meet or exceed the ASTM-D-25780 specifications for conductivity and static decay rates. Use on floors, bench tops, tote boxes, etc. [See More]
- Features: Anti-Static; Conductive; Abrasion, Erosion or Wear Resistant
- Cure / Setting Technology: Film Drying
- Type: Paint; Base Coat
- Substrate: Aluminum; Anodized; Ceramic; Concrete; Metallic; Plastic; Steel; Wood
from Sherwin-Williams Protective & Marine Coatings
ArmorSeal ®TREAD-PLEX is a general purpose, interior/ exterior, VOC compliant, 100% acrylic, low odor, waterborne floor coating. This dries rapidly to a tough, alkali resistant finish which will withstand hard wear, abrasion, grease, oils, and cleaning equipment. One component. Water clean up. [See More]
- Features: Chemical Resistant; Heat Resistant; Abrasion, Erosion or Wear Resistant; Humidity & Scrub Resistance
- Substrate: Concrete; Wood
- Type: Coating; Clear Coat
- Coating Material: Acrylic; Resin; Water
from Rust-Oleum Corporation
Two component, water based epoxy coating, low risk of flammability [See More]
- Features: Chemical Resistant; Abrasion, Erosion or Wear Resistant
- Cure / Setting Technology: Multicomponent
- Type: Coating
- Substrate: Concrete
from Sherwin-Williams Protective & Marine Coatings
General Polymers AquArmor Ceramic Carpet Decorative Flooring Systems combines the historical advantages of epoxy quartz flooring with integral protection against loss of bond due to moisture vapor issues for slabs on grade. Advantages. Withstands vapor emissons. Aesthetically pleasing appearance. [See More]
- Features: Chemical Resistant; Abrasion, Erosion or Wear Resistant
- Cure / Setting Technology: Film Drying; Multicomponent
- Type: Coating
- Substrate: Concrete; Wood; Other; Quarry Tile
from Rust-Oleum Corporation
Two component, low odor, low VOC, 100% solids epoxy floor coating [See More]
- Features: Chemical Resistant; Abrasion, Erosion or Wear Resistant
- Cure / Setting Technology: Multicomponent
- Type: Coating; Base Coat
- Substrate: Concrete
from Sherwin-Williams Protective & Marine Coatings
General Polymers 4090TC FasTop Urethane Coating is a 3 part, low odor, matte finish, pigmented coating to be applied over the FasTop Urethane Systems. Coating may be applied using a hand trowel, flat squeegee or grout float to the desired thickness then back rolled with roller cover. Recommended... [See More]
- Features: Chemical Resistant; Abrasion, Erosion or Wear Resistant
- Cure / Setting Technology: Film Drying; Multicomponent
- Type: Coating
- Substrate: Concrete
from Rust-Oleum Corporation
General purpose modified alkyd primer designed for interior or exterior use [See More]
- Features: Chemical Resistant; Abrasion, Erosion or Wear Resistant; Weather Resistant
- Cure / Setting Technology: Film Drying
- Type: Paint; Enamel; Base Coat
- Substrate: Aluminum; Metallic; Steel
from Sherwin-Williams Protective & Marine Coatings
General Polymers CERAMIC CARPET #400 is an 1/8 ” system which incorporates decorative colored quartz aggregates with high solids epoxy resins and chemical resistant grout and topycoats to form a protective surfacing system which is aesthetically pleasing, slip resistant, durable and resistant... [See More]
- Features: Chemical Resistant; Protective; Abrasion, Erosion or Wear Resistant
- Cure / Setting Technology: Film Drying; Multicomponent
- Type: Coating; Ceramic
- Substrate: Concrete; Wood; Other; Quarry Tile
from Sherwin-Williams Protective & Marine Coatings
General Polymers TPM #115-U1 DECORATIVE TROWELED SYSTEM is a 3/16 ” protective resurfacing systems utilizing an epoxy and silica aggregates mortar, high build grout and seal coats and selected decorative aggregates where a heavy duty decorative flooring system is required. Advantages. Low VOC... [See More]
- Features: Chemical Resistant; Protective; Abrasion, Erosion or Wear Resistant
- Cure / Setting Technology: Film Drying; Multicomponent
- Type: Coating
- Substrate: Concrete; Wood; Other; Quarry Tile
from Sherwin-Williams Protective & Marine Coatings
FasTop CERAMIC CARPET SYSTEM is a decorative color quartz, low odor, self-leveling slurry with quartz broadcast to yield an 3/16 ” finished system. FasTop CERAMIC CARPET can be applied with a pin rake, screed rake or flat trowel. It is designed to provide a durable, yet, decorative seamless... [See More]
- Features: Chemical Resistant; Abrasion, Erosion or Wear Resistant
- Cure / Setting Technology: Film Drying; Multicomponent
- Type: Coating
- Substrate: Concrete; Wood; Other; Quarry Tile
from Sherwin-Williams Protective & Marine Coatings
General Polymers FasTop S URETHANE SLURRY SYSTEM is a self-leveling slurry to be applied at 3/16 ” thickness and broadcast to yield a 1/4 ” - 3/8 ” finished system. FasTop S can be applied with a pin rake, screed rake or flat trowel. It is designed to protect concrete, wood and... [See More]
- Features: Chemical Resistant; Corrosion Resistant; Protective; Abrasion, Erosion or Wear Resistant
- Cure / Setting Technology: Film Drying; Multicomponent
- Type: Coating
- Substrate: Concrete; Steel; Wood; Other; Quarry Tile
from Sherwin-Williams Protective & Marine Coatings
KEM ® Cati-Coat ® HS EPOXY FILLER/SEALER is a high performance, interior/exterior, VOC compliant, epoxy block filler. Designed for tenacious adhesion to masonry substrates while filling voids and crevices to smooth the surface. Excellent resistance to moisture, humidity, impact, and... [See More]
- Features: Chemical Resistant; Touch-Up; Abrasion, Erosion or Wear Resistant; Impact Resistance
- Cure / Setting Technology: Film Drying
- Type: Sealer
- Substrate: Concrete
from Sherwin-Williams Protective & Marine Coatings
General Polymers EPO-FLEX MER I (MECHANICAL EQUIPMENT ROOM) SYSTEM combines EPO-FLEX crack bridging and waterproofing capabilities with a chemically resistant topcoat and an optional wearcourse of EPO-FLEX broad- cast to excess with hard aggregate would provide increased wear, impact, and abrasion... [See More]
- Features: Chemical Resistant; Abrasion, Erosion or Wear Resistant
- Cure / Setting Technology: Film Drying; Multicomponent
- Type: Coating
- Substrate: Concrete; Wood; Other; Quarry Tile
from Sherwin-Williams Protective & Marine Coatings
SETFAST ® Acrylic Zone Marking Paint is a conventional dry (non-heat applied) solvent based paint. It offers the following outstanding properties: Fast dry and hardness development. Excellent dirt pick-up resistance. High durability on concrete and asphalt surfaces. RECOMMENDED USAGE. SETFAST... [See More]
- Features: Abrasion, Erosion or Wear Resistant; Fast Dry, Dry-No-Pickup
- Cure / Setting Technology: Film Drying
- Type: Coating; Paint; Marking Material
- Substrate: Asphalt; Concrete