Steel Floor Coatings
from FORREST Technical Coatings
A corrosion-resistant polyamide epoxy primer for use under high performance fast-dry topcoats. [See More]
- Substrate: Concrete; Metallic; Steel
- Cure / Setting Technology: Film Drying; Multicomponent
- Type: Coating; Paint
- Coating Material: Epoxy; Resin; Solvent
from FORREST Technical Coatings
FirmFoot ® Slip Resistant EpoxyEpoxy Skid Resistant Floor Paint. Pre-mixed epoxy paint with grit to eliminate slippery spots on stairs, walkways, ramps, boat decks, diving boards and dozens of other common locations! Offers firm footing under wet conditions. Easy to use, no mixing. Meets VOC... [See More]
- Substrate: Aluminum; Concrete; Metallic; Plastic; Steel; Wood; Other; Fiberglass
- Cure / Setting Technology: Film Drying
- Type: Paint; Clear Coat; Traction Coating / Friction Modifier
- Coating Material: Epoxy; Resin
from FORREST Technical Coatings
FORREST two-part epoxy coatings provide excellent solvent and corrosion resistance for industrial applications. Ideal for areas where a higher level of performance is required for chemical or solvent exposure. [See More]
- Substrate: Concrete; Metallic; Steel
- Cure / Setting Technology: Film Drying; Multicomponent
- Type: Coating; Paint
- Coating Material: Epoxy; Resin; Solvent
from FORREST Technical Coatings
A high-performance, two-part polyamide epoxy system formulated to protect surfaces exposed to chemicals, solvents or abrasion. Suitable for application on new equipment, structural steel and concrete. Available in non-skid for floor applications. [See More]
- Substrate: Concrete; Metallic; Steel
- Cure / Setting Technology: Film Drying; Multicomponent
- Type: Coating; Paint
- Coating Material: Epoxy; Resin; Solvent
from FORREST Technical Coatings
A two-component, specially-modified, polyamide-cured, high-build epoxy primer providing a very fast-dry topcoat and excellent resistance to corrosive and abrasive environments. Less than 2.8 lbs/gallon VOCs. [See More]
- Substrate: Concrete; Metallic; Steel
- Cure / Setting Technology: Film Drying; Multicomponent
- Type: Coating; Paint
- Coating Material: Epoxy; Resin; Solvent
from FORREST Technical Coatings
A two-component, high-solids, chemical and corrosion resistant modified polyamidoamine epoxy formulated for excellent protection in severe environments. This product uses a special modified polyamidoamine curing agent that imparts the best properties of both amines and conventional polyamides. [See More]
- Substrate: Concrete; Metallic; Steel
- Cure / Setting Technology: Film Drying; Multicomponent
- Type: Coating; Paint
- Coating Material: Epoxy; Resin; Solvent
from Sauereisen, Inc.
ConoGlaze - General Purpose No. 201 is a chemically-resistant, 100% solids, epoxy coating system. It is used as a topcoat. for Sauereisen ConoCrete or FibreCrete systems or as a coating to protect concrete and steel from chemical attack. ConoGlaze may be used in many kinds of manufacturing,... [See More]
- Substrate: Concrete; Metallic; Steel
- Cure / Setting Technology: Film Drying; Multicomponent
- Type: Coating; Clear Coat
- Coating Material: Epoxy; Resin
from Sherwin-Williams Protective & Marine Coatings
ArmorSeal ®1000 HS is a high solids, heavy duty, two-component, catalyzed, polyamide epoxy coating formulated for demanding marine and industrial requirements. This dries rapidly to a tough, high gloss finish with excellent resistance to alkalies, abrasion, corrosion, and chemical attack. [See More]
- Substrate: Concrete; Steel; Wood
- Cure / Setting Technology: Multicomponent
- Type: Coating
- Coating Material: Epoxy; Resin; Polyamide
from Rust-Oleum Corporation
Acrylic aliphatic urethane, high gloss, two component, gloss retention [See More]
- Substrate: Aluminum; Concrete; Metallic; Steel
- Cure / Setting Technology: Multicomponent
- Type: Coating; Enamel; Base Coat
- Coating Material: Acrylic; Polyurethane; Resin
from All-Spec Industries
The All-Spec CP100G-1 is a conductive formulation that has a water based coating manufactured with high quality acrylic latex and waterborne urethane. Produced to meet or exceed the ASTM-D-25780 specifications for conductivity and static decay rates. Use on floors, bench tops, tote boxes, etc. [See More]
- Substrate: Aluminum; Anodized; Ceramic; Concrete; Metallic; Plastic; Steel; Wood
- Cure / Setting Technology: Film Drying
- Type: Paint; Base Coat
- Coating Material: Acrylic; Resin; Water
from Sherwin-Williams Protective & Marine Coatings
ArmorSeal ®650 SL/RC self-leveling, recoatable epoxy is a two-component, heavy duty floor system that provides a high gloss, seamless, hygienic surface that is extremely hard wearing and durable. The coating can also be applied to provide a nonslip texture. This product may be topcoated if... [See More]
- Substrate: Concrete; Steel; Other; Iron
- Cure / Setting Technology: Multicomponent; Thermoset
- Type: Coating; Clear Coat
- Coating Material: Epoxy; Resin; Self-Leveling
from Rust-Oleum Corporation
Multi-purpose oil modified alkyd enamel, light abrasion resistance [See More]
- Substrate: Steel
- Cure / Setting Technology: Film Drying
- Type: Paint; Enamel; Base Coat
- Coating Material: Alkyd; Resin
from Sherwin-Williams Protective & Marine Coatings
ArmorSeal ®HS POLYURETHANE FLOOR ENAMEL is a heavy duty, two component, exterior/interior, low VOC, high solids, polyester-aliphatic urethane industrial floor coating. Provides a high gloss, excellent chemical resistance, color retention, and chalk resistance. Outstanding resistance a wide... [See More]
- Substrate: Concrete; Steel; Other; Iron
- Cure / Setting Technology: Multicomponent
- Type: Coating; Enamel
- Coating Material: Polyurethane; Resin
from Rust-Oleum Corporation
General purpose modified alkyd primer designed for interior or exterior use [See More]
- Substrate: Aluminum; Metallic; Steel
- Cure / Setting Technology: Film Drying
- Type: Paint; Enamel; Base Coat
- Coating Material: Alkyd; Resin
from Sherwin-Williams Protective & Marine Coatings
ArmorSeal ®REXTHANE I FLOOR COATING is a high solids, single component, aliphatic, moisture cure urethane, VOC complying, moisture resistant industrial floor coating. This urethane coating cures to a high gloss and chemical resistant film equivalent to two-part urethane coatings. Impact and... [See More]
- Substrate: Concrete; Steel; Wood; Other; Metalizing, Steel with Zinc
- Cure / Setting Technology: Film Drying; Reactive or Moisture Cured
- Type: Coating; Clear Coat
- Coating Material: Polyurethane; Resin; Aliphatic
from Rust-Oleum Corporation
Industrial food and beverage coating, prevents mold & mildew growth [See More]
- Substrate: Metallic; Steel
- Cure / Setting Technology: Film Drying
- Type: Coating; Paint
- Coating Material: Alkyd; Resin
from Sherwin-Williams Protective & Marine Coatings
General Polymers FasTop S URETHANE SLURRY SYSTEM is a self-leveling slurry to be applied at 3/16 ” thickness and broadcast to yield a 1/4 ” - 3/8 ” finished system. FasTop S can be applied with a pin rake, screed rake or flat trowel. It is designed to protect concrete, wood and... [See More]
- Substrate: Concrete; Steel; Wood; Other; Quarry Tile
- Cure / Setting Technology: Film Drying; Multicomponent
- Type: Coating
- Thickness: 1.88E-4
from Sherwin-Williams Protective & Marine Coatings
Sherwin-Williams Flexible Basecoat Laminate Systems are generally 45 to 65 mil dft systems (prior to the application of a chemical resistant epoxy topping system), designed for crack bridging capability in atmospheric exposure on concrete when used with Sherwin-Williams Mortar, Self Leveling, and... [See More]
- Substrate: Concrete; Steel
- Thickness: 0.0450 to 0.0650
- Type: Coating; Base Coat
- Industry: OEM / Industrial
from Sherwin-Williams Protective & Marine Coatings
INDUSTRIAL ENAMEL VOC COMPLYING is a medium oil, alkyd, interior/exterior, all-purpose enamel. Designed for new construction and maintenance application uses. Dries fast and allows equipment to be placed back in service quickly. Chip and flake resistant. High gloss/dirt resistant. Apply down to 40... [See More]
- Substrate: Aluminum; Concrete; Metallic; Steel; Wood; Other; Iron, Galvanizing
- Cure / Setting Technology: Film Drying
- Type: Coating; Enamel
- Coating Material: Alkyd; Resin
from Sherwin-Williams Protective & Marine Coatings
Industrial Urethane Alkyd Enamel is a high solids, high gloss, 2.8 lb/gal VOC compliant coating intended for interior/exterior use in industrial environments. It is easy to brush, roll or spray. Provides performance comparable to Silicone Alkyds. Modified with urethane resin for increased durability... [See More]
- Substrate: Aluminum; Concrete; Metallic; Steel; Wood; Other; Iron, Galvanizing
- Cure / Setting Technology: Film Drying
- Type: Coating; Enamel
- Coating Material: Alkyd; Polyurethane; Resin
from Sherwin-Williams Protective & Marine Coatings
Corothane ® I ALIPHATIC FINISH COAT is a single component, VOC compliant, moisture curing urethane designed for low temperature or high humidity applications while providing UV resistance and chemical resistance equivalent to two part urethane coatings. Low temperature application - down to 20... [See More]
- Substrate: Concrete; Metallic; Steel; Other; Iron
- Cure / Setting Technology: Reactive or Moisture Cured; Thermoset
- Type: Coating; Clear Coat
- Coating Material: Polyurethane; Resin
from Sherwin-Williams Protective & Marine Coatings
ARMORSEAL HS POLYURETHANE FLOOR ENAMEL is a heavy duty, two component, exterior/interior, low VOC, high solids, polyester-aliphatic urethane industrial floor coating. Provides a high gloss, excellent chemical resistance, color retention, and chalk resistance. Outstanding resistance a wide range of... [See More]
- Substrate: Concrete; Steel
- Cure / Setting Technology: Film Drying; Multicomponent
- Type: Coating
- Coating Material: Polyester-aliphatic Urethane
from Sherwin-Williams Protective & Marine Coatings
Tile-Clad ® HIGH SOLIDS is a VOC compliant, two-package, epoxy-polyamide coating for use in industrial maintenance environments and high performance architectural applications. Chemical resistant. Dry film resists bacterial attack. Abrasion resistant. Low VOC. Mildew Resistant Hardener... [See More]
- Substrate: Aluminum; Concrete; Metallic; Steel; Wood; Other; Iron, Galvanizing
- Cure / Setting Technology: Multicomponent; Thermoset
- Type: Coating
- Coating Material: Epoxy; Resin; Polyamide