Single-ended AC Motors
from ElectroCraft
These 3.03 inch diameter motors (3.11 inch diameter over weld seam) are the smallest ElectroCraft offers and are designed for continuous duty in a 40 °C ambient temperature. At nominal 1650 or 3450 rpm, ratings range from 1/150 to 1/10 HP. AC Type: Permanent Split Capacitor. Size: 3 inches. [See More]
- Shaft Orientation: In-line; Single-ended
- Output Power: 0.1000
- AC Voltage & Frequency: 220 Vac / 50 Hz; 120V/60Hz; International Voltages
- Continuous Current: 1
from Yaskawa America, Inc. - Drives Division
1/4 - 30 HP. BlackMAX inverter (Vector) duty motors offer 1000:1 constant torque (TENV). This three phase motor is designed for inverter or vector applications where up to 1000:1 constant torque speed range is required. Typical uses include: Material handling, machine tools, conveyors, crane and... [See More]
- Shaft Orientation: Single-ended
- Output Power: 30
- Phase: Three-phase
- Continuous Current: 40 to 80
from ElectroCraft
These 3.31 inch diameter motors (3.42 inch diameter over weld seam) are designed for continuous duty in a 40 °C ambient temperature. At nominal 1650 or 3450 rpm, ratings range from 1/60 to 1/4 HP. AC Type: Permanent Split Capacitor. Size: 3.3 inches. Power: to .25 HP [See More]
- Shaft Orientation: In-line; Single-ended
- Output Power: 1/4 HP
- AC Voltage & Frequency: 220 Vac / 50 Hz; 120V/60Hz; International Voltages
- Output Power: 0.2500
from Yaskawa America, Inc. - Drives Division
1-350 HP. The BlueMAX is a totally enclosed, three phase motor designed for inverter or vector applications where up to a 2000:1 constant torque speed range is required. Typical uses include: Material handling, machine tools, conveyors, crane and hoist, metal processing, test stands, pumps,... [See More]
- Shaft Orientation: Single-ended
- Output Power: 15
- Phase: Three-phase
- Continuous Current: 20.2 to 40.4
from ElectroCraft
These 3.74 inch diameter motors (3.86 inch diameter over weld seam) are designed for continuous duty in a 40 °C ambient temperature. At nominal 1650 or 3450 rpm, ratings range from 1/50 to 1/3 HP. AC Type: Permanent Split Capacitor. Size: 3.7 inches. Power: to .3 HP [See More]
- Shaft Orientation: In-line; Single-ended
- Output Power: 0.3300
- AC Voltage & Frequency: 220 Vac / 50 Hz; 120V/60Hz
- Continuous Current: 2.8
from Yaskawa America, Inc. - Drives Division
1/8 - 10 HP; 1800 RPM. MicroMAX inverter (Vector) duty motors offer 1000:1 constant torque (TENV), 20:1 constant torque (TEFC) in a totally enclosed design. This three phase motor is designed for direct replacement of PMDC or any other variable speed applications where up to 1000:1 constant torque... [See More]
- Shaft Orientation: Single-ended
- Output Power: 5 HP / 3.6 KW
- Phase: Three-phase
- Output Power: 5
from Yaskawa America, Inc. - Drives Division
1/2-30 HP, vector duty. The SyMAX ® motor is the next generation of technology in motor efficiency and performance. The SyMAX permanent magnet AC motors offer unique solutions for today ’s demanding applications. This product ’s unparalleled power density, unprecedented performance,... [See More]
- Shaft Orientation: Single-ended
- Output Power: 1/2 HP
- AC Voltage & Frequency: 230/460
- Continuous Current: 0.9300 to 1.86
from Wolong Electric Industrial Motors
Designed for use in blowers, fans, pumps, conveyors, material handling, compressors and other inverter duty applications. Features and Benefits. Standard features. Infinity: 1 CT speed range CH to 90 Hz. IGBT Compatible. N/C thermostat. Opposite DE mounting face and stub shaft for tach mounting. [See More]
- Shaft Orientation: In-line; Single-ended
- AC Motor Features: Multi-speed
- AC Voltage & Frequency: 208-230/240V 60Hz; 460/480V/60Hz; 575/600V/60Hz
- Output Power: 2 HP; 5 HP / 3.6 KW
from Citizen Chiba Precision Co., Ltd.
Use of Nd magnets allows excellent responsiveness and high output in a compact size. The rotor is evenly balanced to suppress mechanical vibrations. Uses slotless coils which prevent cogging and allow smooth revolutions, even at low speeds. Miniaturization and inclusion of a high pulse encoder means... [See More]
- Shaft Orientation: In-line; Single-ended
- Output Power: 0.0268
- Commutation: Brushless
- Continuous Torque: 1.0
from Sinotech
Insulation Resistance: 100M Ω at 500V between motor winding and shell. Insulation Voltage:1500V 50/60Hz @1min between motor winding and shell. Temperature Rise: Max 80oC. Insulation Class: Class B (130oC). Operating Temperature: -10oC to +40oC (Three phase -10oC to +50oC). Humidity: 85% max. [See More]
- Shaft Orientation: In-line; Single-ended
- AC Voltage & Frequency: 120V/60Hz; International Voltages
- AC Construction: Induction
- Phase: Single-phase
from Fasco
Fasco's 3.3" diameter PSC motors can be used in applications such as pumps, copy machines, medical and dental equipment, office machines, computer equipment and appliances. The 3.3" diameter specialty motors are used in portable heaters, therapeutic appliances, variables speed applications, and... [See More]
- Shaft Orientation: In-line; Single-ended
- Phase: Single-phase
- AC Voltage & Frequency: 120V/60Hz (optional feature); 208-230/240V 60Hz (optional feature); 460/480V/60Hz (optional feature)
- AC Motor Features: Multi-speed
from Industrial Indexing Systems, Inc.
The ESM series brushless servomotors are designed for industrial applications that require high performance and high accuracy at a very competitive price. The motors are made with the latest Neodymium Iron Boron high-energy magnets and low loss silicon steel. High accuracy encoder and connectors... [See More]
- Shaft Orientation: In-line; Single-ended
- Continuous Torque: 814.2
- Output Power: 24.53
- Rotor Inertia: 22.66
from OMEGA Engineering, Inc.
Omegamation ™ general purpose AC motors are made by one of the leading motor manufacturers for over 45 years, a world-class accredited supplier with a long history of quality testing procedures and standards performed by the finest independent testing laboratories in the world. Our motors are... [See More]
- Shaft Orientation: In-line; Single-ended
- Phase: Three-phase
- AC Voltage & Frequency: 208-230/460 Volt; 208-230/240V 60Hz; 460/480V/60Hz
- AC Motor Features: Reversible
from Demag Cranes & Components
Demag type D helical gear motors are available in 9 sizes, as foot and flange-mounted units. The gear ratio of the basic two-stage gearbox is already very high. It can also be significantly increased by means of a third stage. Sizes D11 to D41 feature a housing of high-quality pressure die-cast... [See More]
- Shaft Orientation: In-line; Single-ended
- AC Voltage & Frequency: 208-230/240V 60Hz; 460/480V/60Hz; 575/600V/60Hz (optional feature); International Voltages (optional feature)
- AC Construction: Induction
- Phase: Three-phase
from Groschopp, Inc.
Groschopp AC Motors are constructed with class "H" insulation components allowing for running temperatures up to 180 degrees C. Die-cast aluminum endbells. Ball-bearing construction. Tough, all-aluminum frame. Durable powder coating paint. Innovative cooling channels inside the frame to eliminate... [See More]
- Shaft Orientation: In-line; Single-ended
- Phase: Single-phase
- AC Voltage & Frequency: 120V/60Hz
- AC Motor Features: Reversible (optional feature)
from Pittman Motors
PITTMAN ® integrated brushless DC motor and controller packages are designed to simplify system integration, minimize interconnection cabling, and reduce or eliminate noise and motor / drive compatibility issues. [See More]
- Shaft Orientation: In-line; Single-ended
- AC Voltage & Frequency: 120V/60Hz
- Commutation: Brushless
- Output Power: 0.2252
from Autotrol Corporation
Permanent magnet synchronous motor used in applications requiring up to 125 ounce-inches (9,000 gm.-cm.) of dynamic torque. Cut metal or molded plastic gear trains, different output shafts and clutches offer flexibility to meet a variety of application requirements. Our newest gearmotor for timing... [See More]
- Shaft Orientation: In-line; Single-ended; Offset / Parallel
- AC Voltage & Frequency: 24 V; 120V/60Hz; 208-230/240V 60Hz
- AC Construction: Synchronous
- Phase: Single-phase
from item America, LLC
Precision from the first second! item servomotors with absolute encoder don ’t require a homing run each time the system is started up. A homing run is only carried out during initial set-up. The integrated capacitive multiturn absolute encoder helps the Controller keep track of how many... [See More]
- Shaft Orientation: In-line; Single-ended
- AC Voltage & Frequency: 320 V
- AC Construction: Synchronous
- Phase: Three-phase
from M.H. Rhodes/Cramer Company
The Cramer line of AC Permanent Magnet Motors offers application solutions requiring fast starts, fast stops where coasting of load is undesirable and low wattage operating power consumption. Valve drive assemblies. Automatic teller machines. POP displays. Timing control systems [See More]
- Shaft Orientation: In-line; Single-ended
- AC Voltage & Frequency: 24 VAC; 120V/60Hz; 208-230/240V 60Hz
- AC Construction: Synchronous
- Phase: Single-phase
from Anaheim Automation, Inc.
All motor bodies come with a round body and a square flange [See More]
- Shaft Orientation: In-line; Single-ended
- AC Voltage & Frequency: 120V/60Hz
- AC Construction: Synchronous
- Phase: Single-phase
from Genteq
Designed as a smart alternative to the X13, the new Endura Pro features a constant torque 48 frame ECM. When compared to the X13, Endura Pro delivers a series of on-going improvements in multiple areas, plus increased overall reliability. All applications featuring the X13 now use the Endura Pro... [See More]
- Shaft Orientation: In-line; Single-ended
- AC Voltage & Frequency: 277 V; 120V/60Hz; 208-230/240V 60Hz
- Commutation: Brushless
- Phase: Single-phase
from Hymark/Kentucky Gauge
AC induction motors offer a wide selection with reliable performance, uni-directional and continuous operation. Variable AC power input operations. Output 6W up to 90W. CE (EMC & LVD), UL, CCC certified. Wide ranges of model work with magnetic brake, control circuits and speed reducer (motor... [See More]
- Shaft Orientation: In-line; Single-ended
- AC Voltage & Frequency: 120V/60Hz; 208-230/240V 60Hz
- AC Construction: Induction
- Phase: Single-phase; Three-phase
from AMETEK Specialty Motors
AMETEK Prestolite Motors is recognized worldwide as a leader in high quality motors used in hydraulic pumps, winches, snowplows, scissor lifts, coffee grinders, pumps, mixers and many other industrial and commercial applications. It offers an extensive product line backed by outstanding customer... [See More]
- Shaft Orientation: In-line; Single-ended
- Motor Shape: Cylindrical Body
- AC Voltage & Frequency: 12 - 24
- Diameter / Width: 4.50 to 5.00
from GE Power Conversion
Setting the standard with powerful features. IEEE 841 X$D Ultra ® motors meet or exceed the IEEE 841-2009 standard. With an advanced bearing system and class H inverter duty insulation, a test report of each motor to ensure performance, five-year warranty, and all the advanced features that come... [See More]
- Shaft Orientation: In-line; Single-ended
- Output Power: 1 HP; 2 HP; 5 HP / 3.6 KW
- AC Voltage & Frequency: 200V - 690V; 208-230/240V 60Hz; 460/480V/60Hz; 575/600V/60Hz
- Output Power: 0.7371 to 295
from Kollmorgen Corporation
Our high pole count motors naturally turn at slower speeds (72 or 60 rpm). They only need a resistor-capacitor (RC) network to operate from single-phase AC utility power. These motors provide the highest torque in an AC synchronous motor for loads that operate at 72 rpm or slower. They are available... [See More]
- Shaft Orientation: In-line; Single-ended; Double-ended (optional feature)
- AC Construction: Synchronous
- Commutation: Brushless
- AC Voltage & Frequency: 120V/60Hz; 208-230/240V 60Hz
from Ziehl-Abegg Inc.
Specification: Ziehl-Abegg external rotor motors combine the advantages of compact and space saving construction with the proven drive concept of a wear-free squirrel cage motor. 9 frame sizes are available in an output range of 0.1 to 7 kW and 2 constructional designs for flange or axis fastening. [See More]
- Shaft Orientation: In-line; Single-ended
- Phase: Single-phase (optional feature); Three-phase (optional feature)
- AC Voltage & Frequency: 400 V; 208-230/240V 60Hz (optional feature); International Voltages (optional feature)
- Output Power: 1/4 HP; 300 W; 1/2 HP
from Wolong Electric Industrial Motors
GE has been manufacturing premium efficient motors since the late 1970s. The latest Energy Saver design meets EISAct (Energy Independence & Security Act 2007) efficiency levels (which are based on NEMA Premium ® MG1 table 12-12). Other standards and certifications include CSA-Motors and... [See More]
- Shaft Orientation: In-line; Single-ended
- Output Power: 1 HP; 2 HP; 5 HP / 3.6 KW
- AC Voltage & Frequency: 208-230/240V 60Hz; 460/480V/60Hz; 575/600V/60Hz; International Voltages (optional feature)
- Output Power: 1 to 250
from Citizen Chiba Precision Co., Ltd.
Use of Nd magnets allows excellent responsiveness and high output in a compact size. The rotor is evenly balanced to suppress mechanical vibrations. Uses slotless coils which prevent cogging and allow smooth revolutions, even at low speeds. Miniaturization and inclusion of a high pulse encoder means... [See More]
- Shaft Orientation: In-line; Single-ended
- Output Power: 0.0040
- Commutation: Brushless
- Continuous Torque: 0.1
from Sinotech
Motors can be customized upon request. [See More]
- Shaft Orientation: In-line; Single-ended; Double-ended (optional feature)
- AC Voltage & Frequency: 380 VAC; International Voltages
- AC Construction: Induction
- Phase: Single-phase
from Fasco
The Fasco shaded pole and permanent split capacitors are offered in 1/20 to 1/4 HP. The 4.4" diameter motors are used in a variety of applications including compressors, room air conditioners, heating ventilating equipment and pumps. [See More]
- Shaft Orientation: In-line; Single-ended
- Phase: Single-phase
- AC Voltage & Frequency: 120V/60Hz (optional feature); 208-230/240V 60Hz (optional feature)
- Output Power: 1/4 HP
from OMEGA Engineering, Inc.
Omegamation ™ general purpose AC motors are made by one of the leading motor manufacturers for over 45 years, a world-class accredited supplier with a long history of quality testing procedures and standards performed by the finest independent testing laboratories in the world. Our motors are... [See More]
- Shaft Orientation: In-line; Single-ended
- Phase: Three-phase
- AC Voltage & Frequency: 203-230/460 Volt; 208-230/240V 60Hz; 460/480V/60Hz
- AC Motor Features: Reversible
from Demag Cranes & Components
The Demag KB conical-rotor brake motor provides you with a brake motor that utilizes a unique operating principle: The brake is not separately controlled, but firmly connected to the rotor, i.e. integrated. This means that motor start-up and brake release as well as motor switch-off and brake... [See More]
- Shaft Orientation: In-line; Single-ended
- AC Voltage & Frequency: 208-230/240V 60Hz; 460/480V/60Hz; 575/600V/60Hz (optional feature); International Voltages (optional feature)
- AC Construction: Induction
- Phase: Three-phase
from Groschopp, Inc.
Groschopp AC Motors are constructed with class "H" insulation components allowing for running temperatures up to 180 degrees C. Die-cast aluminum endbells. Ball-bearing construction. Tough, all-aluminum frame. Durable powder coating paint. Innovative cooling channels inside the frame to eliminate... [See More]
- Shaft Orientation: In-line; Single-ended
- Phase: Single-phase
- AC Voltage & Frequency: 120V/60Hz
- AC Motor Features: Reversible (optional feature)
from Autotrol Corporation
Permanent magnet synchronous motor used in applications requiring up to 125 ounce-inches (9,000 gm.-cm.) of dynamic torque. Cut metal or molded plastic gear trains, different output shafts and clutches offer flexibility to meet a variety of application requirements. Our most popular low cost... [See More]
- Shaft Orientation: In-line; Single-ended; Offset / Parallel
- AC Voltage & Frequency: 24 V; 120V/60Hz; 208-230/240V 60Hz
- AC Construction: Synchronous
- Phase: Single-phase
from M.H. Rhodes/Cramer Company
Cramer's AC Hysteresis Motor is a shaded pole, synchronous-type that provides smooth, quiet performance and allows operation to a stall condition without damage or increase in temperature rise. External rear bearing provides stability, strength and allows for a double-ended output shaft that can be... [See More]
- Shaft Orientation: In-line; Single-ended; Double-ended (optional feature)
- AC Voltage & Frequency: 24 VAC; 120V/60Hz; 208-230/240V 60Hz; International Voltages
- AC Construction: Synchronous
- Phase: Single-phase
from Genteq
The new Eon ™ motor is a drop-in upgrade for the original ECM 2.3 motor. The motor is commonly used in applications in residential HVAC furnaces and air handlers, commercial variable air volume systems and fan filter units. Eon is a lighter, more compact variable speed ECM that is backward... [See More]
- Shaft Orientation: In-line; Single-ended
- AC Voltage & Frequency: 277 V; 120V/60Hz; 208-230/240V 60Hz; International Voltages
- AC Construction: Induction
- Phase: Single-phase
from Hymark/Kentucky Gauge
AC induction motors offer a wide selection with reliable performance, uni-directional and continuous operation. Variable AC power input options. Output 6W up to 90W. CE (EMC & LVD), UL, CCC Certified. Wide ranges of model work with magnetic brake, control circuits and speed reducer (motor with... [See More]
- Shaft Orientation: In-line; Single-ended
- AC Voltage & Frequency: 380V; 120V/60Hz; 208-230/240V 60Hz
- AC Construction: Induction
- Phase: Single-phase; Three-phase
from AMETEK Specialty Motors
AMETEK Prestolite Motors is recognized worldwide as a leader in high quality motors used in hydraulic pumps, winches, snowplows, scissor lifts, coffee grinders, pumps, mixers and many other industrial and commercial applications. It offers an extensive product line backed by outstanding customer... [See More]
- Shaft Orientation: In-line; Single-ended
- Motor Shape: Cylindrical Body
- AC Voltage & Frequency: 12 - 24
- Diameter / Width: 3.30
from GE Power Conversion
Incorporating a long history of reliable motors with the latest technology. Our NEMA Premium TEFC Quantum motor was designed by a global engineering team and suited for worldwide applications. Quantum LMV uses an innovative D-duct heat transfer technology (patent pending). This unique internal... [See More]
- Shaft Orientation: In-line; Single-ended
- AC Voltage & Frequency: 460 - 6600V; 460/480V/60Hz
- AC Construction: Induction
- Phase: Three-phase
from Kollmorgen Corporation
ST and SN Series synchronous motors provide high performance in three frame sizes, NEMA 23, 34 and 42 (60, 90 and 110 mm). Resistor-capacitor kits are also available. These motors are driven economically from standard AC line voltage and the synchronous speed is related to the line frequency. [See More]
- Shaft Orientation: In-line; Single-ended
- AC Voltage & Frequency: 120V/60Hz
- AC Construction: Synchronous
- AC Motor Features: Reversible
from Wolong Electric Industrial Motors
GE has been manufacturing premium efficient motors since the late 1970s. The latest Energy Saver design meets EISAct (Energy Independence & Security Act 2007) efficiency levels (which are based on NEMA Premium ® MG1 table 12-12). Other standards and certifications include CSA-Motors and... [See More]
- Shaft Orientation: In-line; Single-ended
- Output Power: 1 HP; 2 HP; 5 HP / 3.6 KW
- AC Voltage & Frequency: 200; 208-230/240V 60Hz; 460/480V/60Hz; 575/600V/60Hz; International Voltages (optional feature)
- Output Power: 1 to 300
from Citizen Chiba Precision Co., Ltd.
Use of Nd magnets allows excellent responsiveness and high output in a compact size. The rotor is evenly balanced to suppress mechanical vibrations. Uses slotless coils which prevent cogging and allow smooth revolutions, even at low speeds. Miniaturization and inclusion of a high pulse encoder means... [See More]
- Shaft Orientation: In-line; Single-ended
- Output Power: 0.0080
- Commutation: Brushless
- Continuous Torque: 0.2
from Sinotech
Motors can be customized upon request. [See More]
- Shaft Orientation: In-line; Single-ended; Double-ended (optional feature)
- AC Voltage & Frequency: 208-230/240V 60Hz; International Voltages
- AC Construction: Induction
- Phase: Single-phase
from Fasco
Fasco offers a wide variety of 5.0" diameter motors from single-speed models all the way up to five-speed, covering a range of horsepower from 1/80 HP to 3/4 HP and everything in between. [See More]
- Shaft Orientation: In-line; Single-ended
- Phase: Single-phase
- AC Voltage & Frequency: 120V/60Hz (optional feature); 208-230/240V 60Hz (optional feature)
- AC Motor Features: Reversible (optional feature)
from OMEGA Engineering, Inc.
Omegamation ™ general purpose AC motors are made by one of the leading motor manufacturers for over 45 years, a world-class accredited supplier with a long history of quality testing procedures and standards performed by the finest independent testing laboratories in the world. Our motors are... [See More]
- Shaft Orientation: In-line; Single-ended
- Phase: Single-phase
- AC Voltage & Frequency: 115/208-230 Volt; 120V/60Hz; 208-230/240V 60Hz
- AC Motor Features: Reversible
from Demag Cranes & Components
Demag type A offset gear motors are available in 9 sizes with shaft-mounted gearboxes and torque bracket and foot or flange-mounted configuration. They offer the optimum solution for space-saving drive requirements due to their compact design. Gearbox size A10 is a two-stage unit, all other units... [See More]
- Shaft Orientation: Single-ended; Hollow (optional feature); Offset / Parallel
- AC Voltage & Frequency: 208-230/240V 60Hz; 460/480V/60Hz; 575/600V/60Hz (optional feature); International Voltages (optional feature)
- AC Construction: Induction
- Phase: Three-phase
from Groschopp, Inc.
Low noise, long life. Groschopp AC Motors are constructed with class "H" insulation components allowing for running temperatures up to 180 degrees C. High-efficiency synthetic oil lubricant. Hardened output shaft. Ball and roller bearings. Multiple mounting positions. Rugged cast housing [See More]
- Shaft Orientation: Single-ended; Offset / Parallel
- Phase: Three-phase
- AC Voltage & Frequency: 208-230/240V 60Hz
- AC Motor Features: Reversible (optional feature)
from Autotrol Corporation
A powerful permanent magnet synchronous motor in a very compact package. Delivers 500 ounce-inches of torque at 1 RPM. Speeds available from 1/2 RPM to 240 RPM. Suitable for many instrument and industrial applications. AC Gear Motor - Model 500 Features. Compact package. High torque at low profile. [See More]
- Shaft Orientation: In-line; Single-ended; Offset / Parallel
- AC Voltage & Frequency: 24 V; 120V/60Hz; 208-230/240V 60Hz; International Voltages
- AC Construction: Synchronous
- Phase: Single-phase
from Genteq
Highly reliable. Highly efficient. And now, highly available. Genteq's Evergreen EM is designed by OEM motor experts to replace X13 motors quickly and easily. Evergreen EM is preprogrammed to provide the same comfort, low utility bills and air quality as the OEM X13 ECM motor with less hassle for... [See More]
- Shaft Orientation: In-line; Single-ended
- AC Voltage & Frequency: 120V/60Hz; 208-230/240V 60Hz; International Voltages
- Commutation: Brushless
- Phase: Single-phase
from Hymark/Kentucky Gauge
AC reversible motor offers a wide selection with reliable performance, forward or reverse operation. Variable AC power input options. Output 6W up to 90W. CE (EMC & LVD), UL, CCC Certified. Wide ranges of model work with magnetic brake, control circuits and speed reducer (motor with pinion... [See More]
- Shaft Orientation: In-line; Single-ended
- AC Voltage & Frequency: 120V/60Hz; 208-230/240V 60Hz
- AC Construction: Synchronous
- Phase: Single-phase
from AMETEK Specialty Motors
AMETEK Prestolite Motors is recognized worldwide as a leader in high quality motors used in hydraulic pumps, winches, snowplows, scissor lifts, coffee grinders, pumps, mixers and many other industrial and commercial applications. It offers an extensive product line backed by outstanding customer... [See More]
- Shaft Orientation: In-line; Single-ended
- Motor Shape: Cylindrical Body
- AC Voltage & Frequency: 12
- Diameter / Width: 4.50
from Kollmorgen Corporation
These synchronous motors are available in UL Listed versions suitable for use in Class I, Division 1, Group D hazardous locations. They provide torque up to 1,500 oz-in (1059 N-cm) and are available in NEMA 42 and 66 frame sizes (110 mm and 170 mm). Features. Motor torque up to 1,500 oz-in (1059... [See More]
- Shaft Orientation: In-line; Single-ended; Double-ended (optional feature)
- AC Construction: Synchronous
- Commutation: Brushless
- AC Voltage & Frequency: 120V/60Hz; 208-230/240V 60Hz
from Wolong Electric Industrial Motors
Above NEMA (2300/4000 Volts). 509-5011 Frames [See More]
- Shaft Orientation: In-line; Single-ended
- Output Power: 400 to 800
- AC Voltage & Frequency: 2300/4000
- Units: English
from Citizen Chiba Precision Co., Ltd.
Use of Nd magnets allows excellent responsiveness and high output in a compact size. The rotor is evenly balanced to suppress mechanical vibrations. Uses slotless coils which prevent cogging and allow smooth revolutions, even at low speeds. Miniaturization and inclusion of a high pulse encoder means... [See More]
- Shaft Orientation: In-line; Single-ended
- Output Power: 0.0134
- Commutation: Brushless
- Continuous Torque: 0.4
from Sinotech
Insulation Resistance: 100M Ω at 500V between motor winding and shell. Insulation Voltage:1500V 50/60Hz @1min between motor winding and shell. Temperature Rise: Max 80oC. Insulation Class: Class B (130oC). Operating Temperature: -10oC to +40oC (Three phase -10oC to +50oC). Humidity: 85% max. [See More]
- Shaft Orientation: In-line; Single-ended
- AC Voltage & Frequency: 120V/60Hz; International Voltages
- AC Construction: Induction
- Phase: Single-phase
from Fasco
The Fasco 5.6" diameter Permanent Split Capacitor (PSC) Motors are general replacement direct drive blower motors that feature an open ventilated design, thermal protection, shielded ball bearings, reversible rotation, and are UL recognized and CSA certified. [See More]
- Shaft Orientation: In-line; Single-ended
- Phase: Single-phase (optional feature); Three-phase (optional feature)
- AC Voltage & Frequency: 120V/60Hz (optional feature); 208-230/240V 60Hz (optional feature); 460/480V/60Hz (optional feature); 575/600V/60Hz (optional feature)
- AC Motor Features: Reversible (optional feature)
from OMEGA Engineering, Inc.
The WSS Series stainless steel motors are 3-phase industrial grade washdown duty motors made with 300 grade stainless steel housing. These fractional HP motors come in sizes from 1/3 to 2 H.P. and are available with a double reinforced welded 56H base or without a base in the round body style. [See More]
- Shaft Orientation: In-line; Single-ended
- Phase: Three-phase
- AC Voltage & Frequency: 208-230/240V 60Hz; 460/480V/60Hz; International Voltages
- Output Power: 300 W; 1/2 HP; 1 HP; 2 HP
from Demag Cranes & Components
Demag type W right angle gear motors are available in 10 sizes. They are fitted with output flanges, foot rails or torque brackets to meet your requirements. Right angle gearbox sizes W10 to W50 feature a hypoid wheel pair, offering good efficiency in the lower power range for quiet running... [See More]
- Shaft Orientation: Right Angle; Single-ended; Hollow (optional feature)
- AC Voltage & Frequency: 208-230/240V 60Hz; 460/480V/60Hz; 575/600V/60Hz (optional feature); International Voltages (optional feature)
- AC Construction: Induction
- Phase: Three-phase
from Groschopp, Inc.
Low noise, long life. Groschopp AC Motors are constructed with class "H" insulation components allowing for running temperatures up to 180 degrees C. High-efficiency synthetic oil lubricant. Hardened output shaft. Ball and roller bearings. Multiple mounting positions. Rugged cast housing [See More]
- Shaft Orientation: Single-ended; Offset / Parallel
- Phase: Three-phase
- AC Voltage & Frequency: 208-230/240V 60Hz
- AC Motor Features: Reversible (optional feature)
from Autotrol Corporation
Autotrol ’s New High Performance Gear Motor. Permanent magnet synchronous gear motor used in applications requiring up to 525 ounce inches of dynamic torque. It is available with either molded plastic gearing or powdered metal and heat treated gears. There are four standard output shaft... [See More]
- Shaft Orientation: In-line; Single-ended; Offset / Parallel
- AC Voltage & Frequency: 24 V; 120V/60Hz; 208-230/240V 60Hz
- AC Construction: Synchronous
- Phase: Single-phase
from Genteq
Evergreen IM is high-efficiency ECM replacement motor that is designed to replace factory PSC blower motors in HVAC systems. That means you can now offer your customers the comfort and efficiency of ECM in an easy-to-install replacement motor. Built from the same trusted, field-proven ECM technology... [See More]
- Shaft Orientation: In-line; Single-ended
- AC Voltage & Frequency: 120V/60Hz; 208-230/240V 60Hz; International Voltages
- Commutation: Brushless
- Output Power: 1/2 HP; 1 HP
from Hymark/Kentucky Gauge
AC reversible motor offer a wide selection with reliable performance, forward or reverse operation. Variable AC power input options. Output 6W up to 90W. CE (EMC & LVD), UL, CCC Certified. Wide ranges of model work with magnetic brake, control circuits and speed reducer (motor with pinion shaft,... [See More]
- Shaft Orientation: In-line; Single-ended
- AC Voltage & Frequency: 120V/60Hz; 208-230/240V 60Hz
- AC Construction: Synchronous
- Phase: Single-phase
from AMETEK Specialty Motors
AMETEK Prestolite Motors is recognized worldwide as a leader in high quality motors used in treadmills, coffee grinders, electric lawn mowers, scissor lifts, coffee grinders, pumps, mixers and many other industrial and commercial applications. It offers an extensive product line backed by... [See More]
- Shaft Orientation: In-line; Single-ended
- Motor Shape: Cylindrical Body
from Wolong Electric Industrial Motors
GE is proud to introduce its new line of medium and high voltage horizontal induction motors called Pegasus MHV. The design is a result of much hard work and investment in research, design and equipment. According to our latest market observations, this is truly a best-in-class product. Pegasus MHV... [See More]
- Shaft Orientation: In-line; Single-ended
- Output Power: 500 to 3000
- AC Voltage & Frequency: 2300/4000
- Units: English
from Citizen Chiba Precision Co., Ltd.
Use of Nd magnets allows excellent responsiveness and high output in a compact size. The rotor is evenly balanced to suppress mechanical vibrations. Uses slotless coils which prevent cogging and allow smooth revolutions, even at low speeds. Miniaturization and inclusion of a high pulse encoder means... [See More]
- Shaft Orientation: In-line; Single-ended
- Output Power: 0.0161
- Commutation: Brushless
- Continuous Torque: 0.5
from Sinotech
Insulation Resistance: 100M Ω at 500V between motor winding and shell. Insulation Voltage:1500V 50/60Hz @1min between motor winding and shell. Temperature Rise: Max 80oC. Insulation Class: Class B (130oC). Operating Temperature: -10oC to +40oC (Three phase -10oC to +50oC). Humidity: 85% max. [See More]
- Shaft Orientation: In-line; Single-ended
- AC Voltage & Frequency: 120V/60Hz; International Voltages
- AC Construction: Induction
- Phase: Single-phase
from Fasco
Fasco provides a wide variety of C-Frame general replacement motors that feature an open enclosure, thermal protection, and are UL recognized and CSA certified. [See More]
- Shaft Orientation: In-line; Single-ended
- Phase: Single-phase
- AC Voltage & Frequency: 120V/60Hz (optional feature); 208-230/240V 60Hz (optional feature)
- Output Power: 0.0020 to 0.0500
from Demag Cranes & Components
Our Z cylindrical-rotor motors perform a wide variety of industrial drive tasks – reliably and effectively. They are suitable for a broad range of applications, offering outstanding performance: motor output up to 72 HP (45 kW). inverter-fed drives for travel applications, line-fed travel and... [See More]
- Shaft Orientation: In-line; Single-ended
- AC Voltage & Frequency: 208-230/240V 60Hz; 460/480V/60Hz; 575/600V/60Hz (optional feature); International Voltages (optional feature)
- AC Construction: Induction
- Phase: Three-phase
from Groschopp, Inc.
Low noise, long life. Groschopp AC Motors are constructed with class "H" insulation components allowing for running temperatures up to 180 degrees C. High-efficiency synthetic oil lubricant. Hardened output shaft. Ball and roller bearings. Multiple mounting positions. Rugged cast housing [See More]
- Shaft Orientation: In-line; Single-ended
- Phase: Three-phase
- AC Voltage & Frequency: 208-230/240V 60Hz
- AC Motor Features: Reversible (optional feature)
from Autotrol Corporation
Instrument grade permanent magnet synchronous motor is electrically reversible and is precision built for long life applications. Available in speeds from 1 RPM to 240 RPM. Also available without gearhead as direct drive motor...consult factory. AC Gear Motor - Model 550 Features. Electrically... [See More]
- Shaft Orientation: In-line; Single-ended; Offset / Parallel
- AC Voltage & Frequency: 24 V; 120V/60Hz; 208-230/240V 60Hz; International Voltages
- AC Construction: Synchronous
- Phase: Single-phase
from Genteq
ECM 142R is the next generation of high-efficiency, fractional-horsepower outdoor motors. 142R is ideally suited to outdoor applications such as split system outdoor units, package units, or any other prop fan air-moving that requires a 1/5, 1/3, 1/2 or 3/4 horsepower, 300-1200 RPM motor. [See More]
- Shaft Orientation: In-line; Single-ended
- Output Power: 1/4 HP; 300 W; 1/2 HP
- Commutation: Brushless
- Output Power: 0.2000 to 0.7500
from Hymark/Kentucky Gauge
Suitable for highly frequent start/stop operation. Using high precision, highly responsive clutch and brake, most suitable for frequent start/stop construction. Precise Positioning. When the brake is in use, the clutch will separate the link from the brake, so there are no overruns, making... [See More]
- Shaft Orientation: Single-ended
- Motor Shape: Cylindrical Body; Square Body
from AMETEK Specialty Motors
AMETEK Floorecare & Specialty Motors manufactures a line of commercial series universal wound drive motors for use in coffee grinder, leaf blowers, electric chainsaws, blenders, and many other applications. Floorcare & Specialty motors provides customization for the manufacturer. [See More]
- Shaft Orientation: In-line; Single-ended
- Motor Shape: Cylindrical Body
from Wolong Electric Industrial Motors
GE is proud to introduce its new line of medium voltage totally enclosed fan-cooled (TEFC) induction motors called Quantum LMV. This motor was designed by a global engineering team and suited for worldwide applications. Quantum LMV uses an innovative D-duct heat transfer technology (patent pending). [See More]
- Shaft Orientation: In-line; Single-ended
- AC Voltage & Frequency: 2300/4000
- AC Construction: Induction
- Output Power: 900 to 2000
from Sinotech
Insulation Resistance: 100M Ω at 500V between motor winding and shell. Insulation Voltage:1500V 50/60Hz @1min between motor winding and shell. Temperature Rise: Max 80oC. Insulation Class: Class B (130oC). Operating Temperature: -10oC to +40oC (Three phase -10oC to +50oC). Humidity: 85% max. [See More]
- Shaft Orientation: In-line; Single-ended
- AC Voltage & Frequency: 120V/60Hz; 208-230/240V 60Hz; International Voltages
- AC Construction: Induction
- Phase: Single-phase
from Fasco
Fasco's PSC internal capacitor unit bearing motors are primarily used in commercial refrigeration applications, but can be used in any application demanding dependability with output ratings between 1 - 9 watts. Mechanical Features: Type: 3.3 ” PSC aluminum or cast iron frame unit bearing. [See More]
- Shaft Orientation: In-line; Single-ended
- Phase: Single-phase
- AC Voltage & Frequency: 120V/60Hz (optional feature); 208-230/240V 60Hz (optional feature)
- AC Motor Features: Reversible (optional feature)
from Groschopp, Inc.
Low noise, long life. Groschopp AC Motors are constructed with class "H" insulation components allowing for running temperatures up to 180 degrees C. High-efficiency synthetic oil lubricant. Hardened output shaft. Ball and roller bearings. Multiple mounting positions. Rugged cast housing [See More]
- Shaft Orientation: In-line; Single-ended
- Phase: Three-phase
- AC Voltage & Frequency: 208-230/240V 60Hz
- AC Motor Features: Reversible (optional feature)
from Genteq
The sixth generation of premium ECM motors, ThinkTank 3.0 features built-in BlaKBox Technology and the AirKom ™ operating system, which lets equipment manufacturers create forced-air systems that are more advanced, more reliable, and easier to service. Systems that utilize the ThinkTank 3.0... [See More]
- Shaft Orientation: In-line; Single-ended
- AC Voltage & Frequency: 120V/60Hz; 208-230/240V 60Hz; International Voltages
- Commutation: Brushless
- Output Power: 300 W; 1/2 HP; 1 HP
from Hymark/Kentucky Gauge
Operating Frequency and Limitation. Electronic Instant Brake, could be used for inch movement, a rise temperature would result from frequent start-stop action of the motor. Please suspend operation temporally if the surface temperature of the motor exceeds 90 deg C. Braking Principles. Electronic... [See More]
- Shaft Orientation: Single-ended
- Motor Shape: Cylindrical Body
from Wolong Electric Industrial Motors
GE ValueLine vertical hollow shaft (VHS) WPI product line is a high thrust design intended for deep-well pump applications. The ValueLine product offering ranges from 5-300 HP and is compatible with a variable speed drive. ValueLine ODP Features. Motor type: Three phase induction. Cast Iron frame... [See More]
- Shaft Orientation: In-line; Single-ended
- AC Voltage & Frequency: 208-230/240V 60Hz; 460/480V/60Hz; International Voltages (optional feature)
- AC Construction: Induction
- Phase: Three-phase
from Sinotech
Insulation Resistance: 100M Ω at 500V between motor winding and shell. Insulation Voltage:1500V 50/60Hz @1min between motor winding and shell. Temperature Rise: Max 80oC. Insulation Class: Class B (130oC). Operating Temperature: -10oC to +40oC (Three phase -10oC to +50oC). Humidity: 85% max. [See More]
- Shaft Orientation: In-line; Single-ended
- AC Voltage & Frequency: 120V/60Hz; International Voltages
- AC Construction: Induction
- Phase: Single-phase
from Fasco
Fasco's shaded pole aluminum frame unit bearing motors are primarily used in commercial refrigeration applications, but can be used in any application demanding dependability with output ratings between 2 - 14 watts. Mechanical Features: Type: 3.3 ” shaded pole aluminum frame unit bearing. [See More]
- Shaft Orientation: In-line; Single-ended
- Phase: Single-phase
- AC Voltage & Frequency: 120V/60Hz (optional feature); 208-230/240V 60Hz (optional feature)
- AC Motor Features: Multi-speed (optional feature)
from Groschopp, Inc.
Low noise, long life. Groschopp AC Motors are constructed with class "H" insulation components allowing for running temperatures up to 180 degrees C. High-efficiency synthetic oil lubricant. Hardened output shaft. Ball and roller bearings. Multiple mounting positions. Rugged cast housing [See More]
- Shaft Orientation: In-line; Single-ended
- Phase: Three-phase
- AC Voltage & Frequency: 208-230/240V 60Hz
- AC Motor Features: Reversible (optional feature)
from Hymark/Kentucky Gauge
High Braking & Holding Force. Built-in excitation brake, as the power is shut off, it can stop the motor instantly and accurately holds the load, making it most suitable for emergency braking. Brake Precision. Regardless of rpm, the magnetic brake can control the overturns within 2 to 3 turns,... [See More]
- Shaft Orientation: Single-ended
- Motor Shape: Cylindrical Body
from Wolong Electric Industrial Motors
The ValueLine product offering ranges from 5-300 HP and is compatible with a variable speed drive. [See More]
- Shaft Orientation: In-line; Single-ended
- Phase: Three-phase
- AC Voltage & Frequency: 208-230/240V 60Hz; 460/480V/60Hz
- Output Power: 5 HP / 3.6 KW
from Sinotech
Insulation Resistance: 100M Ω at 500V between motor winding and shell. Insulation Voltage:1500V 50/60Hz @1min between motor winding and shell. Temperature Rise: Max 80oC. Insulation Class: Class B (130oC). Operating Temperature: -10oC to +40oC (Three phase -10oC to +50oC). Humidity: 85% max. [See More]
- Shaft Orientation: In-line; Single-ended
- AC Voltage & Frequency: 120V/60Hz; International Voltages
- AC Construction: Induction
- Phase: Single-phase
from Fasco
Fasco's PSC unit bearing motors are primarily used in commercial refrigeration applications, both evaporator and condenser, but can be used in any application demanding dependability with output ratings between 1 - 9 watts. [See More]
- Shaft Orientation: In-line; Single-ended
- Phase: Single-phase
- AC Voltage & Frequency: 120V/60Hz (optional feature); 208-230/240V 60Hz (optional feature)
- Output Power: 0.0027 to 0.0670
from Groschopp, Inc.
Low noise, long life. Groschopp AC Motors are constructed with class "H" insulation components allowing for running temperatures up to 180 degrees C. High-efficiency synthetic oil lubricant. Hardened output shaft. Ball and roller bearings. Multiple mounting positions. Rugged cast housing [See More]
- Shaft Orientation: In-line; Single-ended
- Phase: Three-phase
- AC Voltage & Frequency: 208-230/240V 60Hz
- AC Motor Features: Reversible (optional feature)
from Hymark/Kentucky Gauge
Easy wiring and speed control. Induction and reversible motor equipped with generator, various wiring methods and control types available. Built-in electronic brake circuits for instant braking. Wide range of variable speed. Output 6W-90W. To work with speed reducer is available (motor with pinion... [See More]
- Shaft Orientation: Single-ended; Offset / Parallel
- AC Voltage & Frequency: 120V/60Hz; 208-230/240V 60Hz
- AC Construction: Induction
- Phase: Single-phase
from Wolong Electric Industrial Motors
The XSD Ultra ® family of products ranges from 1-300 HP and is built to the highest standards to maximize your return on investment. XSD Ultra is a complete cast iron motor exceeding NEMA Premium ® Efficiency standards. The Six Star Bearing System ™ ensures long bearing life and is... [See More]
- Shaft Orientation: In-line; Single-ended
- Phase: Three-phase
- AC Voltage & Frequency: 208-230/240V 60Hz; 460/480V/60Hz; 575/600V/60Hz; International Voltages
- AC Motor Features: Reversible (optional feature)
from Sinotech
Insulation Resistance: 100M Ω at 500V between motor winding and shell. Insulation Voltage:1500V 50/60Hz @1min between motor winding and shell. Temperature Rise: Max 80oC. Insulation Class: Class B (130oC). Operating Temperature: -10oC to +40oC (Three phase -10oC to +50oC). Humidity: 85% max. [See More]
- Shaft Orientation: In-line; Single-ended
- AC Voltage & Frequency: 120V/60Hz; International Voltages
- AC Construction: Induction
- Phase: Single-phase
from Groschopp, Inc.
Low noise, long life. Groschopp AC Motors are constructed with class "H" insulation components allowing for running temperatures up to 180 degrees C. High-efficiency synthetic oil lubricant. Hardened output shaft. Ball and roller bearings. Multiple mounting positions. Rugged cast housing [See More]
- Shaft Orientation: In-line; Single-ended
- Phase: Three-phase
- AC Voltage & Frequency: 208-230/240V 60Hz
- AC Motor Features: Reversible (optional feature)
from Hymark/Kentucky Gauge
Easy wiring and speed control. Circuits, capacitor and variable resistor are assembled in controller, which is attached to motor via extended cable. Ready-to-use once power is supplied. Output 6W-90W. To work with speed reducer is available (motor with pinion shaft, GN or GX model) [See More]
- Shaft Orientation: Single-ended; Offset / Parallel
- AC Voltage & Frequency: 120V/60Hz; 208-230/240V 60Hz
- AC Construction: Induction
- Phase: Single-phase
from Wolong Electric Industrial Motors
The XSD Ultra ® family of products ranges from 1-300 HP and is built to the highest standards to maximize your return on investment. XSD Ultra is a complete cast iron motor exceeding NEMA Premium ® Efficiency standards. The Six Star Bearing System ™ ensures long bearing life and is... [See More]
- Shaft Orientation: In-line; Single-ended
- Phase: Three-phase
- AC Voltage & Frequency: 208-230/240V 60Hz; 460/480V/60Hz; 575/600V/60Hz; International Voltages
- Output Power: 1 HP; 2 HP; 5 HP / 3.6 KW
from Sinotech
Insulation Resistance: 100M Ω at 500V between motor winding and shell. Insulation Voltage:1500V 50/60Hz @1min between motor winding and shell. Temperature Rise: Max 80oC. Insulation Class: Class B (130oC). Operating Temperature: -10oC to +40oC (Three phase -10oC to +50oC). Humidity: 85% max. [See More]
- Shaft Orientation: In-line; Single-ended
- AC Voltage & Frequency: 120V/60Hz; International Voltages
- AC Construction: Induction
- Phase: Single-phase
from Groschopp, Inc.
Low noise, long life. Groschopp BLDC Motors are rated for 130 degrees C continuous internal temperature. High-efficiency synthetic oil lubricant. Turned, heat-treated and ground shaft. Ball bearings. Multiple mounting positions. Rugged cast housing [See More]
- Shaft Orientation: In-line; Single-ended
- Output Power: 0.0483
- AC Motor Features: Reversible (optional feature)
- Continuous Current: 0.6500
from Hymark/Kentucky Gauge
A torque motor possesses strong starting torque and falling characteristics. Under low speed and constraint, it can rotate steadily. The rotational torque is proportional to the motor voltage. A change in supply voltage could alter the speed. [See More]
- Shaft Orientation: Single-ended
- Motor Shape: Cylindrical Body
from Wolong Electric Industrial Motors
The XSD Ultra ® family of products ranges from 1-300 HP and is built to the highest standards to maximize your return on investment. XSD Ultra is a complete cast iron motor exceeding NEMA Premium ® Efficiency standards. The Six Star Bearing System ™ ensures long bearing life and is... [See More]
- Shaft Orientation: In-line; Single-ended
- Phase: Three-phase
- AC Voltage & Frequency: 208-230/240V 60Hz; 460/480V/60Hz; 575/600V/60Hz
- Output Power: 5 HP / 3.6 KW
from Sinotech
Insulation Resistance: 100M Ω at 500V between motor winding and shell. Insulation Voltage:1500V 50/60Hz @1min between motor winding and shell. Temperature Rise: Max 80oC. Insulation Class: Class B (130oC). Operating Temperature: -10oC to +40oC (Three phase -10oC to +50oC). Humidity: 85% max. [See More]
- Shaft Orientation: In-line; Single-ended
- AC Voltage & Frequency: 120V/60Hz; International Voltages
- AC Construction: Induction
- Phase: Single-phase
from Groschopp, Inc.
Low noise, long life. Groschopp AC Motors are constructed with class "H" insulation components allowing for running temperatures up to 180 degrees C. High-efficiency synthetic oil lubricant. Hardened output shaft. Ball and roller bearings. Multiple mounting positions. Rugged cast housing [See More]
- Shaft Orientation: Right Angle; Single-ended; Double-ended (optional feature)
- Phase: Three-phase
- AC Voltage & Frequency: 208-230/240V 60Hz
- AC Motor Features: Reversible (optional feature)
from Sinotech
Insulation Resistance: 100M Ω at 500V between motor winding and shell. Insulation Voltage:1500V 50/60Hz @1min between motor winding and shell. Temperature Rise: Max 80oC. Insulation Class: Class B (130oC). Operating Temperature: -10oC to +40oC (Three phase -10oC to +50oC). Humidity: 85% max. [See More]
- Shaft Orientation: In-line; Single-ended
- AC Voltage & Frequency: 120V/60Hz; International Voltages
- AC Construction: Induction
- Phase: Single-phase
from Groschopp, Inc.
Low noise, long life. Groschopp AC Motors are constructed with class "H" insulation components allowing for running temperatures up to 180 degrees C. High-efficiency synthetic oil lubricant. Hardened output shaft. Ball and roller bearings. Multiple mounting positions. Rugged cast housing [See More]
- Shaft Orientation: Right Angle; Single-ended; Double-ended (optional feature)
- Phase: Three-phase
- AC Voltage & Frequency: 208-230/240V 60Hz
- AC Motor Features: Reversible (optional feature)
from Sinotech
Insulation Resistance: 100M Ω at 500V between motor winding and shell. Insulation Voltage:1500V 50/60Hz @1min between motor winding and shell. Temperature Rise: Max 80oC. Insulation Class: Class B (130oC). Operating Temperature: -10oC to +40oC (Three phase -10oC to +50oC). Humidity: 85% max. [See More]
- Shaft Orientation: In-line; Single-ended
- AC Voltage & Frequency: 120V/60Hz; International Voltages
- AC Construction: Induction
- Phase: Single-phase
from Groschopp, Inc.
Low noise, long life. Groschopp AC Motors are constructed with class "H" insulation components allowing for running temperatures up to 180 degrees C. High-efficiency synthetic oil lubricant. Hardened output shaft. Ball and roller bearings. Multiple mounting positions. Rugged cast housing [See More]
- Shaft Orientation: Right Angle; Single-ended
- Phase: Three-phase
- AC Voltage & Frequency: 208-230/240V 60Hz
- AC Motor Features: Reversible (optional feature)
from Sinotech
Insulation Resistance: 100M Ω at 500V between motor winding and shell. Insulation Voltage:1500V 50/60Hz @1min between motor winding and shell. Temperature Rise: Max 80oC. Insulation Class: Class B (130oC). Operating Temperature: -10oC to +40oC (Three phase -10oC to +50oC). Humidity: 85% max. [See More]
- Shaft Orientation: In-line; Single-ended
- AC Voltage & Frequency: 120V/60Hz; International Voltages
- AC Construction: Induction
- Phase: Single-phase
from Groschopp, Inc.
Low noise, long life. Groschopp AC Motors are constructed with class "H" insulation components allowing for running temperatures up to 180 degrees C. High-efficiency synthetic oil lubricant. Hardened output shaft. Ball and roller bearings. Multiple mounting positions. Rugged cast housing [See More]
- Shaft Orientation: Right Angle; Single-ended
- Phase: Three-phase
- AC Voltage & Frequency: 208-230/240V 60Hz
- AC Motor Features: Reversible (optional feature)
from Sinotech
Insulation Resistance: 100M Ω at 500V between motor winding and shell. Insulation Voltage:1500V 50/60Hz @1min between motor winding and shell. Temperature Rise: Max 80oC. Insulation Class: Class B (130oC). Operating Temperature: -10oC to +40oC (Three phase -10oC to +50oC). Humidity: 85% max. [See More]
- Shaft Orientation: In-line; Single-ended
- AC Voltage & Frequency: 120V/60Hz; International Voltages
- AC Construction: Induction
- Phase: Single-phase
from Sinotech
Insulation Resistance: 100M Ω at 500V between motor winding and shell. Insulation Voltage:1500V 50/60Hz @1min between motor winding and shell. Temperature Rise: Max 80oC. Insulation Class: Class B (130oC). Operating Temperature: -10oC to +40oC (Three phase -10oC to +50oC). Humidity: 85% max. [See More]
- Shaft Orientation: In-line; Single-ended
- AC Voltage & Frequency: 120V/60Hz; International Voltages
- AC Construction: Induction
- Phase: Single-phase
from Sinotech
Insulation Resistance: 100M Ω at 500V between motor winding and shell. Insulation Voltage:1500V 50/60Hz @1min between motor winding and shell. Temperature Rise: Max 80oC. Insulation Class: Class B (130oC). Operating Temperature: -10oC to +40oC (Three phase -10oC to +50oC). Humidity: 85% max. [See More]
- Shaft Orientation: In-line; Single-ended
- AC Voltage & Frequency: 120V/60Hz; International Voltages
- AC Construction: Induction
- Phase: Single-phase
from Sinotech
Insulation Resistance: 100M Ω at 500V between motor winding and shell. Insulation Voltage:1500V 50/60Hz @1min between motor winding and shell. Temperature Rise: Max 80oC. Insulation Class: Class B (130oC). Operating Temperature: -10oC to +40oC (Three phase -10oC to +50oC). Humidity: 85% max. [See More]
- Shaft Orientation: In-line; Single-ended
- AC Voltage & Frequency: 120V/60Hz; International Voltages
- AC Construction: Induction
- Phase: Single-phase
from Sinotech
Insulation Resistance: 100M Ω at 500V between motor winding and shell. Insulation Voltage:1500V 50/60Hz @1min between motor winding and shell. Temperature Rise: Max 80oC. Insulation Class: Class B (130oC). Operating Temperature: -10oC to +40oC (Three phase -10oC to +50oC). Humidity: 85% max. [See More]
- Shaft Orientation: In-line; Single-ended
- AC Voltage & Frequency: 120V/60Hz; International Voltages
- AC Construction: Induction
- Phase: Single-phase
from Sinotech
Insulation Resistance: 100M Ω at 500V between motor winding and shell. Insulation Voltage:1500V 50/60Hz @1min between motor winding and shell. Temperature Rise: Max 80oC. Insulation Class: Class B (130oC). Operating Temperature: -10oC to +40oC (Three phase -10oC to +50oC). Humidity: 85% max. [See More]
- Shaft Orientation: In-line; Single-ended
- AC Voltage & Frequency: 120V/60Hz; International Voltages
- AC Construction: Induction
- Phase: Single-phase
from Sinotech
Insulation Resistance: 100M Ω at 500V between motor winding and shell. Insulation Voltage:1500V 50/60Hz @1min between motor winding and shell. Temperature Rise: Max 80oC. Insulation Class: Class B (130oC). Operating Temperature: -10oC to +40oC (Three phase -10oC to +50oC). Humidity: 85% max. [See More]
- Shaft Orientation: In-line; Single-ended
- AC Voltage & Frequency: 120V/60Hz; International Voltages
- AC Construction: Induction
- Phase: Single-phase
from Sinotech
Insulation Resistance: 100M Ω at 500V between motor winding and shell. Insulation Voltage:1500V 50/60Hz @1min between motor winding and shell. Temperature Rise: Max 80oC. Insulation Class: Class B (130oC). Operating Temperature: -10oC to +40oC (Three phase -10oC to +50oC). Humidity: 85% max. [See More]
- Shaft Orientation: In-line; Single-ended
- AC Voltage & Frequency: 120V/60Hz; International Voltages
- AC Construction: Induction
- Phase: Single-phase