Unfilled Plastic Plate, Rod, and Stock Shapes
from Duvelco Limited
Ducoya® G001 is a remarkable material with unparalleled physical strength, elongation and toughness. Ducoya G001 can also continuously operate over a wide temperature range from near absolute zero to greater than 400°C in a favorable chemical environment. Its excellent electrical and thermal... [See More]
- Filler: Unfilled
- Form / Shape: Rod or Round Stock (optional feature); Hollow or Tubular Stock (optional feature); Plate (optional feature)
- Chemical System: Thermoplastic; Polyimide or Bismaleimide (BMI)
- Industry: Aerospace; Semiconductors or IC Packaging
from Duvelco Limited
Ducoya® G001 UP is an ultra-pure polyimide for semiconductors. The material is intended for use in the latest semiconductor manufacturing operations where feature sizes can be found in the low nanometer range. [See More]
- Filler: Unfilled
- Form / Shape: Rod or Round Stock (optional feature); Hollow or Tubular Stock (optional feature); Plate (optional feature)
- Chemical System: Thermoplastic; Polyimide or Bismaleimide (BMI)
- Industry: Semiconductors or IC Packaging
from Nylacast LLC
Aquanyl is a copolymer of Nylon 6 and Nylon 12 produced via the anionic polymerization process using the monomer's Caprolactam and Laurinlactam. It has reduced water absorption, improved stability and impact strength. [See More]
- Filler: Unfilled
- Form / Shape: Rod or Round Stock; Hollow or Tubular Stock; Plate
- Chemical System: Thermoplastic; Polyamide
- CTE: 33 to 50
from Nytef Group
Unfilled Nylon 6 natural and black. 210 °F continuous use temperature. Nytef Plastics utilizes a proprietary nylon casting process to produce UNIPA M Nylon 6 stock shapes. This process allows Nylon rods, plates, and tubular bars with very thick cross sections to be economically produced with... [See More]
- Filler: Unfilled
- Form / Shape: Rod or Round Stock; Hollow or Tubular Stock; Plate
- Chemical System: Thermoplastic; Polyamide
- Thickness: 0.2500 to 4
from Ensinger, Inc.
This unreinforced material is Ensinger's basic type of PVDF offering. It combines high density, high strength, and high chemical resistance, with very low moisture absorption. It also exhibits resistance to UV radiation. Ensinger sells this material under the tradename TECAFLON PVDF natural. Facts. [See More]
- Filler: Unfilled
- Use Temperature: 300
- Chemical System: PVDF (Polyvinylidene fluoride)
- Deflection Temperature: 235 to 300
from Fluoro-Plastics, Inc.
PTFE can be etched with a sodium ammonia or sodium naphthalene etch so that its surface is chemically modified for adhesion to various substrates using ordinary commercial grade epoxies. When etched for bonding, PTFE can be used as chute liners, vessel linings, and glued to processing surfaces to... [See More]
- Filler: Unfilled
- Form / Shape: Plate
- Chemical System: Thermoplastic; Fluoropolymer
- Thickness: 0.0625 to 0.0938
from TriStar Plastics Corp.
High-temperature resistance. Chemical resistance. FDA compliance [See More]
- Filler: Unfilled
- Form / Shape: Bar Stock or Rod Stock; Rod or Round Stock; Sheet or Film
- Chemical System: Thermoplastic; Fluoropolymer; Vinyl / PVC
- Thickness: 0.0900 to 4
from Redwood Plastics
Redco ™ Ultra High Molecular Weight Polyethylene (UHMWPE), also known as high modulus polyethylene (HMPE) or high performance polyethylene (HPPE), is a thermoplastic. It has extremely long chains, with molecular weight numbering in the millions, usually between 3.1 and 5.67 million. This high... [See More]
- Filler: Unfilled
- Form / Shape: Profile or Structural Shape (optional feature)
- Chemical System: Thermoplastic; Polyethylene
- Industry: Sanitary; OEM or Industrial; Semiconductors or IC Packaging; Wood Processing, Agriculture, Material Handling, Pulp and Paper, Railroad, Mining, Waste Water Treatment, Oil Drilling & Exploration
from Nylacast LLC
We manufacturer a wide range of sizes in all our grades of material. Our rod casting facility produces rods from 10mm to 500mm outside diameter. The standard lengths we manufacture in the tube range is 3000mm, 2440mm, 2000mm, 1220mm, 1000mm and 500mm [See More]
- Filler: Unfilled
- Form / Shape: Rod or Round Stock
- Chemical System: Thermoplastic (optional feature); Moly PA 6 C, H.S. Blue, Nylube, Aquanyl; Polysulphide or Polyphenylene Sulphide (optional feature); Polypropylene (optional feature); Fluoropolymer (optional feature); PEEK (optional feature); Vinyl / PVC (optional feature); Polyethylene (optional feature); Acetal or Polyoxymethylene (POM) (optional feature)
- Width / O.D.: 0.3937
from Ensinger, Inc.
TECAFORM AH natural acetal is an unfilled porosity free POM-C with a unique balance of physical properties not available in most other thermoplastics. This copolymer acetal is an engineering plastic made for wide-ranging universal applications in many different industries. The key performance... [See More]
- Filler: Unfilled
- Use Temperature: 195 to 285
- Chemical System: Thermoplastic; POM-C (Polyacetal (Copolymer)); Acetal or Polyoxymethylene (POM)
- Deflection Temperature: 230 to 316
from Fluoro-Plastics, Inc.
Molded plate is available in thicknesses from 3/8ths of an inch up to four inches. Plate is inventoried in sizes from one-foot square to four feet square (sixteen square feet per sheet). Thickness tolerances range from plus .038" to minus .019" for 3/8th ” plate, up to plus .087", minus .043"... [See More]
- Filler: Unfilled
- Form / Shape: Plate
- Chemical System: Thermoplastic; Fluoropolymer
- Thickness: 0.3750 to 6
from Redwood Plastics
Redco ™ Ultra High Molecular Weight Polyethylene (UHMWPE), also known as high modulus polyethylene (HMPE) or high performance polyethylene (HPPE), is a thermoplastic. It has extremely long chains, with molecular weight numbering in the millions, usually between 3.1 and 5.67 million. This high... [See More]
- Filler: Unfilled
- Form / Shape: Profile or Structural Shape (optional feature)
- Chemical System: Thermoplastic; Polyethylene
- Industry: Sanitary; OEM or Industrial; Semiconductors or IC Packaging; Wood Processing, Agriculture, Material Handling, Pulp and Paper, Railroad, Mining, Waste Water Treatment, Oil Drilling & Exploration
from Ensinger, Inc.
Polyamide 66 has good rigidity, hardness, abrasion resistance and thermal dimensional stability. In addition, nylon 66 has outstanding wear resistance and low frictional properties. It also has very good temperature, chemical, and impact properties. Users should be aware of PA 66 propensity to... [See More]
- Filler: Unfilled
- Industry: Automotive; Electronics; Marine
- Chemical System: PA 66 (Polyamide 66); Polyamide
- Use Temperature: 185 to 300
from Redwood Plastics
Redco ™ Acrylic sheet products are of the highest quality with tight thickness tolerances. Redco Acrylic offers an economical and longer lasting alternative to glass with its high optical characteristics and low stress levels. Redco ™ Acrylic is a product with outstanding optical... [See More]
- Filler: Unfilled
- Form / Shape: Profile or Structural Shape (optional feature)
- Chemical System: Thermoplastic; Acrylic or Polyacrylate
- Thickness: 0.0312 to 5
from Ensinger, Inc.
TECANAT black polycarbonate is a high impact resistant polymer for use when clarity is not important. The unmodified PC is characterized by high strength, rigidity and hardness, as well as good impact strength. However, as is the case with all amorphous thermoplastics, lower chemical resistance may... [See More]
- Filler: Unfilled
- Use Temperature: 250 to 275
- Chemical System: Thermoplastic; PC (Polycarbonate); Polycarbonate
- Deflection Temperature: 270
from Redwood Plastics
Lighter and longer lasting than plywood or steel, Redco ™ Outrigger Pads stand up to harsh weather and extreme environments to protect you and your equipment from costly accidents. [See More]
- Filler: Unfilled
- Form / Shape: Plate
- Chemical System: Thermoplastic; Polyethylene
- Thickness: 1 to 2
from Ensinger, Inc.
Due to its low level of crystallinity, Ensinger's polycarbonate, marketed as TECANAT natural, has a high level of transparency. The unmodified PC is characterized by high strength, rigidity and hardness, as well as good impact strength. However, as is the case with all amorphous thermoplastics,... [See More]
- Filler: Unfilled
- Use Temperature: 250 to 275
- Chemical System: Thermoplastic; PC (Polycarbonate); Polycarbonate
- Deflection Temperature: 270 to 280
from Redwood Plastics
Redco ™ Circular Saw Blades. Redco ™ Circular Saw Blade Carriers are constructed of long lasting Redco ™ HDPE and are ergonomically designed to prevent injuries to saw filers by allowing the saw blade to be carried safely and changed out from the saw without having to handle the... [See More]
- Filler: Unfilled
- Form / Shape: Profile or Structural Shape (optional feature)
- Chemical System: Thermoplastic; Polyethylene
- Industry: OEM or Industrial; Sawmills, Planer Mills
from Ensinger, Inc.
This compression molded material is an unfilled Victrex ® PEEK polymer available in rods, tubes and plates. Facts. Chemical designation: PEEK (Polyetheretherketone). Color: beige. Density: 1,33 g/cm3. Main Features. excellent strength. broad chemical compatibility. good dimensional stability. [See More]
- Filler: Unfilled
- Use Temperature: 500
- Chemical System: PEEK (Polyetheretherketone); PEEK
- Deflection Temperature: 300
from Redwood Plastics
Redco Sprockets were developed to increase the life of your equipment and decrease the noise in your facility. There are three standard types of sprockets available (below) but many custom sizes and configurations have been developed to suite a variety of applications. [See More]
- Filler: Unfilled
- Form / Shape: Profile or Structural Shape (optional feature)
- Chemical System: Thermally cured; Polyurethane
- Industry: OEM or Industrial; Transfers and Most Planer Applications
from Ensinger, Inc.
Medical PEEK natural is suitable for use in medical applications and combines the excellent property profile of standard PEEK with requirements for biocompatibility. Victrex ® PEEK polymer is used for these materials and processed in compliance with the relevant product quality requirements for... [See More]
- Filler: Unfilled
- Industry: Sanitary
- Chemical System: PEEK (Polyetheretherketone); PEEK
- Use Temperature: 480 to 572
from Redwood Plastics
Redwood Plastics can supply and fully finish a wide selection of products in rubber. Crowned, grooved and specialty profile finishes are available to suit the needs of your application. PRODUCTS AVAILABLE: Specialty Roller Covering. Sheet Rubber. Extruded Profiles. Rubber Lining Fabricated Parts. [See More]
- Filler: Unfilled
- Form / Shape: Profile or Structural Shape (optional feature); Sheet or Film (optional feature)
- Chemical System: Natural Rubber
- Thickness: 0.0312 to 1
from Ensinger, Inc.
Polyetheretherketone (PEEK) - TECAPEEK natural is a high performance, high temperature, semi crystalline thermoplastic manufactured by Ensinger and may use Victrex ® PEEK 450G or Solvay Ketaspire ® KT-820 polymer. The most well known and important member of the polyaryletherketone group... [See More]
- Filler: Unfilled
- Use Temperature: 480 to 572
- Chemical System: Thermoplastic; PEEK (Polyetheretherketone); PEEK
- Deflection Temperature: 320
from Redwood Plastics
Redco ™ Nylon Crane Float Pads can withstand high loads (up to 250 tons per pad) and function within safety limits at high and low temperatures. They are wear resistant, light weight and will not crack or shatter under load or uneven ground. Use in combination with Redco UHMW or Urethane... [See More]
- Filler: Unfilled
- Form / Shape: Profile or Structural Shape (optional feature)
- Chemical System: Thermoplastic; Polyamide
- Industry: Repair or Construction
from Ensinger, Inc.
TECAPEI natural (PEI) is an unreinforced polyetherimide, suitable for contact with foods, that exhibits high mechanical strength and rigidity. The characteristic profile includes very good hydrolysis resistance, and dimensional stability, combined with a relatively high long term service... [See More]
- Filler: Unfilled
- Features: Electrical Insulation
- Chemical System: PEI (Polyetherimide); Polyetherimide
- Use Temperature: 338 to 392
from Redwood Plastics
Lighter and longer lasting than plywood or steel, Redco ™ Outrigger Pads stand up to harsh weather and extreme environments to protect you and your equipment from costly accidents. [See More]
- Filler: Unfilled
- Form / Shape: Plate
- Chemical System: Thermoplastic; Polyamide
- Thickness: 1 to 2
from Ensinger, Inc.
TECASINT 1011 is an unfilled polyimide natural grade. This material particularly stands out in the TECASINT 1000 product family for very high strength and elongation. It is characterised by properties such as a very high modulus of elasticity, high rigidity, high degree of hardness and low thermal... [See More]
- Filler: Unfilled
- Thermal Conductivity: 0.2200
- Chemical System: PI (Polyimide); Polyimide or Bismaleimide (BMI)
- Tensile (Break): 16824
from Redwood Plastics
Redco ™ PEEK is high temperature resistant with excellent chemical and fatigue resistance as well as thermal stability. It exhibits superior mechanical and electrical properties, with a maximum continuous working temperature of 480 °F. Redco ™ PEEK has excellent retention of... [See More]
- Filler: Unfilled
- Form / Shape: Profile or Structural Shape (optional feature)
- Chemical System: Thermoplastic; PEEK
- Industry: Aerospace; Automotive; OEM or Industrial; Semiconductors or IC Packaging; Earth Moving Equipment, Wire and Cable Coating
from Ensinger, Inc.
TECASINT 2011 is one of the unfilled natural grades. It has a very high modulus of elasticity, high rigidity and hardness. Compared with TECASINT 1011 it has significantly reduced moisture absorption, higher toughness and better machining properties. Within the TECASINT 2000 series the material has... [See More]
- Filler: Unfilled
- Use Temperature: 536 to 626
- Chemical System: PI (Polyimide); Polyimide or Bismaleimide (BMI)
- Deflection Temperature: 600
from Redwood Plastics
Redco ™ Polycarbonate is easily worked, molded, and thermoformed; as such, polycarbonate is very widely used in modern manufacturing. Features such as temperature resistance, impact resistance and optical properties make Redco ™ Polycarbonate the perfect choice for industrial and... [See More]
- Filler: Unfilled
- Form / Shape: Profile or Structural Shape (optional feature); Sheet or Film
- Chemical System: Thermoplastic; Polycarbonate
- Thickness: 0.0200 to 0.5000
from Ensinger, Inc.
Compared with the other TECASINT materials the TECASINT 4000 series exhibits very low moisture absorption and high oxidative stability along with improved chemical resistance. Despite its high strength, TECASINT 4011 has high elongation at break and toughness. Rigidity and modulus are significantly... [See More]
- Filler: Unfilled
- Thermal Conductivity: 0.4000
- Chemical System: PI (Polyimide); Polyimide or Bismaleimide (BMI)
- Tensile (Break): 18855
from Redwood Plastics
Redco ™ Polyvinyl-chloride (PVC) has good heat and chemical resistance. Excellent for outdoor applications. Redco ™ Polyvinyl-chloride (PVC) is paintable and weather resistant with a high tensile, compressive, and flexural strength. Redco ™ Polyvinyl Chloride (PVC) is available in... [See More]
- Filler: Unfilled
- Form / Shape: Profile or Structural Shape (optional feature)
- Chemical System: Thermoplastic; Vinyl / PVC
- Thickness: 0.0625 to 4
from Ensinger, Inc.
TECASON S - PSU - is a transparent engineering plastic known for its chemical resistance, rigidity, and high-temperature performance. The polysulfone material's ability to operate in an autoclave environment while maintaining its excellent mechanical properties over a wide range of temperatures is... [See More]
- Filler: Unfilled
- Use Temperature: 285 to 340
- Chemical System: PSU (Polysulfone); Polysulphone
- Deflection Temperature: 345 to 358
from Redwood Plastics
Redco ™ PVC Strip Door brings solutions to a variety of installations. Heated or cooled air becomes contained resulting in energy savings lost from unprotected openings. Dust, dirt and other contaminants remain contained to reduce overall clean up costs. As well, Redco ™ PVC Strip Door... [See More]
- Filler: Unfilled
- Form / Shape: Profile or Structural Shape (optional feature)
- Chemical System: Thermoplastic; Vinyl / PVC
- Thickness: 0.0625 to 4
from Ensinger, Inc.
Polyphenylenesulphide (PPS) - TECATRON - is a semi crystalline, high temperature thermoplastic. Due to its chemical structure, PPS is a very resistant polymer with high mechanical strength and rigidity, even at temperatures above 392 °F. In addition to the low water absorption, PPS also shows... [See More]
- Filler: Unfilled
- Use Temperature: 338 to 500
- Chemical System: Thermoplastic; PPS (Polyphenylensulfide); Polysulphide or Polyphenylene Sulphide; Polyphenylene Oxide
- Deflection Temperature: 220 to 400
from Redwood Plastics
Redco ™ PTFE (TEFLON ®) offers outstanding properties making it the ultimate choice due a multitude of applications. Redco PTFE has the lowest coefficient of friction, no water absorption, is self lubricating, has excellent chemical resistance and a high temperature tolerance (+500F). [See More]
- Filler: Unfilled
- Form / Shape: Profile or Structural Shape (optional feature); Sheet or Film (optional feature)
- Chemical System: Thermoplastic; Fluoropolymer
- Industry: OEM or Industrial; Solid Pipe and Fittings, Steel Pipe Liner and Fittings, Valve Components, Expansion Bellows, Shaft Packing and Tubing, Seals, Piston Rings
from Redwood Plastics
Redco Sprockets were developed to increase the life of your equipment and decrease the noise in your facility. There are three standard types of sprockets available (below) but many custom sizes and configurations have been developed to suite a variety of applications. [See More]
- Filler: Unfilled
- Form / Shape: Profile or Structural Shape (optional feature)
- Chemical System: Thermally cured; Polyurethane
- Industry: OEM or Industrial
from Redwood Plastics
Lighter and longer lasting than plywood or steel, Redco ™ Outrigger Pads stand up to harsh weather and extreme environments to protect you and your equipment from costly accidents. [See More]
- Filler: Unfilled
- Form / Shape: Plate
- Chemical System: Thermoplastic; Polyethylene
- Thickness: 1 to 2
from Redwood Plastics
Redco ™ HDPE is defined by a density of greater or equal to 0.941 g/cc. Redco ™ HDPE has a low degree of branching and thus stronger intermolecular forces and tensile strength. Redco ™ HDPE used in products and packaging such as milk jugs, detergent bottles, margarine tubs, and... [See More]
- Filler: Unfilled
- Form / Shape: Profile or Structural Shape (optional feature); Sheet or Film (optional feature)
- Chemical System: Thermoplastic; Polyethylene
- Industry: Marine; Sanitary; Repair or Construction; OEM or Industrial
from Redwood Plastics
Redco ™ 430 offers high abrasion resistance with superior impingement resistance. Durometer Hardness: 43D, 90A. Standard Color: Yellow [See More]
- Filler: Unfilled
- Form / Shape: Profile or Structural Shape (optional feature)
- Chemical System: Thermally cured; Polyurethane
- Industry: OEM or Industrial
from Redwood Plastics
Redco 500 is an excellent shock absorber. Combines the qualities of hard and softer urethanes. Abrasion & impact resistance. Durometer Hardness: 50D, 95A. Standard Color: Dark Blue [See More]
- Filler: Unfilled
- Form / Shape: Profile or Structural Shape (optional feature)
- Chemical System: Thermally cured; Polyurethane
- Industry: OEM or Industrial
from Redwood Plastics
Redco 54A is a softer, pliable urethane that combines excellent memory and gripping characteristics with superior resilience to abrasion and tearing. Durometer Hardness: 54A. Standard Color: Maroon [See More]
- Filler: Unfilled
- Form / Shape: Profile or Structural Shape (optional feature)
- Chemical System: Thermally cured; Polyurethane
- Industry: OEM or Industrial; Dolly Wheel Tires, Carryover Tires, Feed Wheels, Roll Coverings, Shock and Vibration Pads
from Redwood Plastics
Redco ™ 60D was developed for applications where little or no deformation is desired. Durometer Hardness: 60D, 60R. Standard Color: Orange [See More]
- Filler: Unfilled
- Form / Shape: Profile or Structural Shape (optional feature)
- Chemical System: Thermally cured; Polyurethane
- Industry: OEM or Industrial
from Redwood Plastics
Redco ™ 6060 is a unique formulation designed to withstand abrasion and deterioration in an impingement type of application. Durometer Hardness: 62A. Standard Color: Dark Green [See More]
- Filler: Unfilled
- Form / Shape: Profile or Structural Shape (optional feature)
- Chemical System: Thermally cured; Polyurethane
- Industry: OEM or Industrial; Impact Wear Liners, Wear Liners
from Redwood Plastics
Redco ™ Nylon Natural offers the excellent abrasion resistance, and dimensionally stable qualities inherent of all cast nylon grades. In addition, Redco ™ Natural conforms to US F.D.A 21CFR177.1500 making it ideal for components in the Food Processing Industry. Standard Color: Natural... [See More]
- Filler: Unfilled
- Form / Shape: Profile or Structural Shape (optional feature); Sheet or Film (optional feature)
- Chemical System: Thermoplastic; Polyamide
- Thickness: 0.2500 to 3
from Redwood Plastics
Phenolic resin, when combined with cotton fabric, offers excellent strength and rigidity, good insulative qualities, and optimum machinability. These qualities make our standard “NEMA CE ” grade ideally suited for high load and high impact applications.For applications that require a... [See More]
- Filler: Unfilled
- Form / Shape: Rod or Round Stock (optional feature); Hollow or Tubular Stock (optional feature); Sheet or Film (optional feature)
- Chemical System: Thermally cured; Phenolics or Formaldehyde Resins
- Industry: Electronics; Military (optional feature); OEM or Industrial
from Redwood Plastics
Unfilled or natural grade of Tuffkast – yellow in color. High impact resistance with tensile properties and bearing compressive properties. Recommended for applications where factors such as shock, abrasion, vibration, impact, load, and a harsh environment limit the suitability of traditional... [See More]
- Filler: Unfilled
- Form / Shape: Profile or Structural Shape (optional feature)
- Chemical System: Thermoplastic; Polyamide
- Thickness: 0.2500 to 3