Plastic Threaded Inserts
from RS Components, Ltd.
Thalassa PLS - insert expansible M5 pour [See More]
- Material: Plastic
from bisco industries
Panel Fasteners [See More]
- Material: Plastic; Polyester
from bisco industries
Panel Fasteners [See More]
- Material: Plastic; Nylon; Nylon
from bisco industries
Panel Fasteners [See More]
- Material: Plastic; Nylon; Nylon
from bisco industries
Panel Fasteners [See More]
- Material: Plastic; Nylon; Nylon
from bisco industries
Panel Fasteners [See More]
- Material: Plastic; Polyester
from E-Z LOK
E-Z Fin ™ Threaded Insert for Soft Wood or Plastic - Double fin - 1/4-20. E-Z Fin ™ (Finserts) provide strong, metal threads in soft woods, like pine, composition board, and MDF, and most plastics. Firm, permanent fastening is achieved by distributing stress over a greater surface area,... [See More]
- Material: Plastic; Soft Wood, Thermoset Plastic, Thermoplastic
- Base Materials: Metal; Brass
- Installation Method: Finsert
- Internal Thread Size: 1/4-20
from E-Z LOK
E-Z Fin ™ Threaded Insert for Soft Wood or Plastic - Single fin - 10-32. E-Z Fin ™ (Finserts) provide strong, metal threads in soft woods, like pine, composition board, and MDF, and most plastics. Firm, permanent fastening is achieved by distributing stress over a greater surface area,... [See More]
- Material: Plastic; Soft Wood, Thermoset Plastic, Thermoplastic
- Base Materials: Metal; Brass
- Installation Method: Finsert
- Internal Thread Size: 10-32
from E-Z LOK
E-Z Fin ™ Threaded Insert for Soft Wood or Plastic - Triple fin - 1/4-20. E-Z Fin ™ (Finserts) provide strong, metal threads in soft woods, like pine, composition board, and MDF, and most plastics. Firm, permanent fastening is achieved by distributing stress over a greater surface area,... [See More]
- Material: Plastic; Soft Wood, Thermoset Plastic, Thermoplastic
- Base Materials: Metal; Brass
- Installation Method: Finsert
- Internal Thread Size: 1/4-20
from E-Z LOK
E-Z Press ™ Threaded Insert for Plastic - Flanged - Stainless - 1/4-20. E-Z Press ™ inserts are threaded inserts designed for post-molding installation in either thermoset plastics or thermoplastics. A slotted design with diamond-knurled OD allows for “cold ” installation... [See More]
- Material: Plastic; Thermoset Plastic, Thermoplastic
- Base Materials: Metal; Steel - Stainless
- Installation Method: Pressed-In; Press-In
- Internal Thread Size: 1/4-20
from E-Z LOK
E-Z Press ™ Threaded Insert for Plastic - Flanged - Stainless - 10-32. E-Z Press ™ inserts are threaded inserts designed for post-molding installation in either thermoset plastics or thermoplastics. A slotted design with diamond-knurled OD allows for “cold ” installation with... [See More]
- Material: Plastic; Thermoset Plastic, Thermoplastic
- Base Materials: Metal; Steel - Stainless
- Installation Method: Pressed-In; Press-In
- Internal Thread Size: 10-32
from E-Z LOK
E-Z Press ™ Threaded Insert for Plastic - Flanged - Stainless - 2-56. E-Z Press ™ inserts are threaded inserts designed for post-molding installation in either thermoset plastics or thermoplastics. A slotted design with diamond-knurled OD allows for “cold ” installation with... [See More]
- Material: Plastic; Thermoset Plastic, Thermoplastic
- Base Materials: Metal; Steel - Stainless
- Installation Method: Pressed-In; Press-In
- Internal Thread Size: 2-56
from E-Z LOK
E-Z Press ™ Threaded Insert for Plastic - Flanged - Stainless - 4-40. E-Z Press ™ inserts are threaded inserts designed for post-molding installation in either thermoset plastics or thermoplastics. A slotted design with diamond-knurled OD allows for “cold ” installation with... [See More]
- Material: Plastic; Thermoset Plastic, Thermoplastic
- Base Materials: Metal; Steel - Stainless
- Installation Method: Pressed-In; Press-In
- Internal Thread Size: 4-40
from E-Z LOK
E-Z Press ™ Threaded Insert for Plastic - Flanged - Stainless - 6-32. E-Z Press ™ inserts are threaded inserts designed for post-molding installation in either thermoset plastics or thermoplastics. A slotted design with diamond-knurled OD allows for “cold ” installation with... [See More]
- Material: Plastic; Thermoset Plastic, Thermoplastic
- Base Materials: Metal; Steel - Stainless
- Installation Method: Pressed-In; Press-In
- Internal Thread Size: 6-32
from E-Z LOK
E-Z Press ™ Threaded Insert for Plastic - Flanged - Stainless - 8-32. E-Z Press ™ inserts are threaded inserts designed for post-molding installation in either thermoset plastics or thermoplastics. A slotted design with diamond-knurled OD allows for “cold ” installation with... [See More]
- Material: Plastic; Thermoset Plastic, Thermoplastic
- Base Materials: Metal; Steel - Stainless
- Installation Method: Pressed-In; Press-In
- Internal Thread Size: 8-32
from E-Z LOK
E-Z Press ™ Threaded Insert for Plastic - Flanged - Stainless - M4-0.7. E-Z Press ™ inserts are threaded inserts designed for post-molding installation in either thermoset plastics or thermoplastics. A slotted design with diamond-knurled OD allows for “cold ” installation... [See More]
- Material: Plastic
from E-Z LOK
E-Z Press ™ Threaded Insert - Flanged- Aluminum - 10-24. E-Z Press ™ inserts are threaded inserts designed for post-molding installation in either thermoset plastics or thermoplastics. A slotted design with diamond-knurled OD allows for “cold ” installation with optimum... [See More]
- Material: Plastic; Thermoset Plastic, Thermoplastic
- Base Materials: Metal; Aluminum
- Installation Method: Pressed-In; Press-In
- Internal Thread Size: 10-24
from E-Z LOK
E-Z Press ™ Threaded Insert for Plastic - Flanged - Brass - 1/4-20. E-Z Press ™ inserts are threaded inserts designed for post-molding installation in either thermoset plastics or thermoplastics. A slotted design with diamond-knurled OD allows for “cold ” installation with... [See More]
- Material: Plastic; Thermoset Plastic, Thermoplastic
- Base Materials: Metal; Brass
- Installation Method: Pressed-In; Press-In
- Internal Thread Size: 1/4-20
from E-Z LOK
E-Z Press ™ Threaded Insert for Plastic - Flanged - Brass - 10-32. E-Z Press ™ inserts are threaded inserts designed for post-molding installation in either thermoset plastics or thermoplastics. A slotted design with diamond-knurled OD allows for “cold ” installation with... [See More]
- Material: Plastic; Thermoset Plastic, Thermoplastic
- Base Materials: Metal; Brass
- Installation Method: Pressed-In; Press-In
- Internal Thread Size: 10-32
from E-Z LOK
E-Z Press ™ Threaded Insert for Plastic - Flanged - Brass - 2-56. E-Z Press ™ inserts are threaded inserts designed for post-molding installation in either thermoset plastics or thermoplastics. A slotted design with diamond-knurled OD allows for “cold ” installation with... [See More]
- Material: Plastic; Thermoset Plastic, Thermoplastic
- Base Materials: Metal; Brass
- Installation Method: Pressed-In; Press-In
- Internal Thread Size: 2-56
from E-Z LOK
E-Z Press ™ Threaded Insert for Plastic - Flanged - Brass - 3/8-16. E-Z Press ™ inserts are threaded inserts designed for post-molding installation in either thermoset plastics or thermoplastics. A slotted design with diamond-knurled OD allows for “cold ” installation with... [See More]
- Material: Plastic; Thermoset Plastic, Thermoplastic
- Base Materials: Metal; Brass
- Installation Method: Pressed-In; Press-In
- Internal Thread Size: 3/8-16
from E-Z LOK
E-Z Press ™ Threaded Insert for Plastic - Flanged - Brass - 4-40. E-Z Press ™ inserts are threaded inserts designed for post-molding installation in either thermoset plastics or thermoplastics. A slotted design with diamond-knurled OD allows for “cold ” installation with... [See More]
- Material: Plastic; Thermoset Plastic, Thermoplastic
- Base Materials: Metal; Brass
- Installation Method: Pressed-In; Press-In
- Internal Thread Size: 4-40
from E-Z LOK
E-Z Press ™ Threaded Insert for Plastic - Flanged - Brass - 5/16-18. E-Z Press ™ inserts are threaded inserts designed for post-molding installation in either thermoset plastics or thermoplastics. A slotted design with diamond-knurled OD allows for “cold ” installation with... [See More]
- Material: Plastic; Thermoset Plastic, Thermoplastic
- Base Materials: Metal; Brass
- Installation Method: Pressed-In; Press-In
- Internal Thread Size: 5/16-18
from E-Z LOK
E-Z Press ™ Threaded Insert for Plastic - Flanged - Brass - 8-32. E-Z Press ™ inserts are threaded inserts designed for post-molding installation in either thermoset plastics or thermoplastics. A slotted design with diamond-knurled OD allows for “cold ” installation with... [See More]
- Material: Plastic; Thermoset Plastic, Thermoplastic
- Base Materials: Metal; Brass
- Installation Method: Pressed-In; Press-In
- Internal Thread Size: 8-32
from E-Z LOK
E-Z Press ™ Threaded Insert for Plastic - Flush - Stainless - 1/4-20. E-Z Press ™ inserts are threaded inserts designed for post-molding installation in either thermoset plastics or thermoplastics. A slotted design with diamond-knurled OD allows for “cold ” installation with... [See More]
- Material: Plastic; Thermoset Plastic, Thermoplastic
- Base Materials: Metal; Steel - Stainless
- Installation Method: Pressed-In; Press-In
- Internal Thread Size: 1/4-20
from E-Z LOK
E-Z Press ™ Threaded Insert for Plastic - Flush - Stainless - 10-32. E-Z Press ™ inserts are threaded inserts designed for post-molding installation in either thermoset plastics or thermoplastics. A slotted design with diamond-knurled OD allows for “cold ” installation with... [See More]
- Material: Plastic; Thermoset Plastic, Thermoplastic
- Base Materials: Metal; Steel - Stainless
- Installation Method: Pressed-In; Press-In
- Internal Thread Size: 10-32
from E-Z LOK
E-Z Press ™ Threaded Insert for Plastic - Flush - Stainless - 2-56. E-Z Press ™ inserts are threaded inserts designed for post-molding installation in either thermoset plastics or thermoplastics. A slotted design with diamond-knurled OD allows for “cold ” installation with... [See More]
- Material: Plastic; Thermoset Plastic, Thermoplastic
- Base Materials: Metal; Steel - Stainless
- Installation Method: Pressed-In; Press-In
- Internal Thread Size: 2-56
from E-Z LOK
E-Z Press ™ Threaded Insert for Plastic - Flush - Stainless - 3/8-16. E-Z Press ™ inserts are threaded inserts designed for post-molding installation in either thermoset plastics or thermoplastics. A slotted design with diamond-knurled OD allows for “cold ” installation with... [See More]
- Material: Plastic; Thermoset Plastic, Thermoplastic
- Base Materials: Metal; Steel - Stainless
- Installation Method: Pressed-In; Press-In
- Internal Thread Size: 3/8-16
from E-Z LOK
E-Z Press ™ Threaded Insert for Plastic - Flush - Stainless - 4-40. E-Z Press ™ inserts are threaded inserts designed for post-molding installation in either thermoset plastics or thermoplastics. A slotted design with diamond-knurled OD allows for “cold ” installation with... [See More]
- Material: Plastic; Thermoset Plastic, Thermoplastic
- Base Materials: Metal; Steel - Stainless
- Installation Method: Pressed-In; Press-In
- Internal Thread Size: 4-40
from E-Z LOK
E-Z Press ™ Threaded Insert for Plastic - Flush - Stainless - 6-32. E-Z Press ™ inserts are threaded inserts designed for post-molding installation in either thermoset plastics or thermoplastics. A slotted design with diamond-knurled OD allows for “cold ” installation with... [See More]
- Material: Plastic; Thermoset Plastic, Thermoplastic
- Base Materials: Metal; Steel - Stainless
- Installation Method: Pressed-In; Press-In
- Internal Thread Size: 6-32
from E-Z LOK
E-Z Press ™ Threaded Insert for Plastic - Flush - Brass - 0-80. E-Z Press ™ inserts are threaded inserts designed for post-molding installation in either thermoset plastics or thermoplastics. A slotted design with diamond-knurled OD allows for “cold ” installation with... [See More]
- Material: Plastic; Thermoset Plastic, Thermoplastic
- Base Materials: Metal; Brass
- Installation Method: Pressed-In; Press-In
- Internal Thread Size: 0-80