Brass Threaded Inserts
from PennEngineering®
Knurls under the head of the insert increase spinout resistance. Works in any thickness over .062 ”/1.57 mm including blind applications. Minimal backside protrusion for restricted space applications. Additional thread sizes and grip ranges available. Not a typical stock item. Other materials... [See More]
- Material: Brass
- Base Materials: Metal
- Installation Method: Threaded Hole
-
Internal Thread Size: .76 mm - Over
from SPIROL
Series 14 Tapered Hole — Tapered design for tapered holes for ease of location and reduced installation time. [See More]
- Material: Brass
- Base Materials: Plastic; Thermoplastics
- Installation Method: Thermal; Ultrasonic
- Length: 0.1880 to 0.5620
from bisco industries
Threaded Inserts [See More]
- Material: Brass; BRASS
- Internal Thread Size: M2 x 0.4
- Installation Method: Threaded Hole
- Metric: M2
from RS Components, Ltd.
M3.5 BRASS HEAT INSTALL INSERT FLUSH [See More]
- Material: Brass
- Length: 0.2795
- Internal Thread Size: M3.5
- Units: Metric
from PennEngineering®
Designed for high load applications. Countersunk feature allow fastener to be installed flush with sheet surface. [See More]
- Material: Brass
- Base Materials: Metal
- Installation Method: Threaded Hole
-
Internal Thread Size: 8.60 - 11.10 mm
from SPIROL
Series 19 Straight Hole and Series 20 Flanged — Designed for straight holes to yield maximum performance with low radial stress. [See More]
- Material: Aluminum; Brass
- Base Materials: Plastic; Thermoplastics
- Installation Method: Thermal; Ultrasonic
- Length: 0.1570 to 0.5000
from RS Components, Ltd.
M3 BRASS HEAT INSTALL INSERT FLUSH [See More]
- Material: Brass
- Length: 0.2244
- Internal Thread Size: M3
- Units: Metric
from PennEngineering®
Designed for high load applications. Designed for high load applications. Available with rib, key or full hex features for high torque applications. [See More]
- Material: Brass
- Base Materials: Metal
- Installation Method: Threaded Hole
-
Internal Thread Size: 8.00 - 10.50 mm
from SPIROL
Series 19 Straight Hole and Series 20 Flanged — Designed for straight holes to yield maximum performance with low radial stress. [See More]
- Material: Aluminum; Brass
- Base Materials: Plastic; Thermoplastics
- Installation Method: Thermal; Ultrasonic
- External Thread Size: Headed Tapered Knurl and Groove
from RS Components, Ltd.
M4 BRASS HEAT INSTALL INSERT FLUSH [See More]
- Material: Brass
- Length: 0.3228
- Internal Thread Size: M4
- Units: Metric
from PennEngineering®
Designed for use in straight holes. Self-aligning lead-in of insert provides for accurate alignment prior to installation. [See More]
- Material: Brass
- Base Materials: Metal
- Installation Method: Threaded Hole
- Units: Metric
from SPIROL
Series 29 Standard and Series 30 Flanged — Symmetrical for ease of orientation and enhanced performance designed to maximize torque and pull out values. [See More]
- Material: Aluminum; Brass
- Base Materials: Plastic; Thermoplastics
- Installation Method: Thermal; Ultrasonic
- Length: 0.1570 to 0.5000
from RS Components, Ltd.
M5 BRASS HEAT INSTALL INSERT FLUSH [See More]
- Material: Brass
- Length: 0.3740
- Internal Thread Size: M5
- Units: Metric
from PennEngineering®
Designed for use in straight or tapered holes. Symmetrical design eliminates the need for orientation. [See More]
- Material: Brass
- Base Materials: Metal
- Installation Method: Threaded Hole
- Units: Metric
from SPIROL
Series 29 Standard and Series 30 Flanged — Symmetrical for ease of orientation and enhanced performance designed to maximize torque and pull out values. [See More]
- Material: Aluminum; Brass
- Base Materials: Plastic; Thermoplastics
- Installation Method: Thermal; Ultrasonic
- Length: 0.1570 to 0.5000
from RS Components, Ltd.
M6 BRASS HEAT INSTALL INSERT FLUSH [See More]
- Material: Brass
- Length: 0.5000
- Internal Thread Size: M6
- Units: Metric
from PennEngineering®
Features: Blind-end protects the threads from plastic intrusion. Aluminum inserts ideal for light weight designs. Aluminum and stainless steel inserts offer lead-free alternative. [See More]
- Material: Aluminum; Brass; Stainless Steel
- Base Materials: Metal
- Installation Method: Molded-In; Threaded Hole
- Units: Inch
from SPIROL
Series 14 Tapered Hole — Tapered design for tapered holes for ease of location and reduced installation time. [See More]
- Material: Brass
- Base Materials: Plastic; Thermoplastics
- Installation Method: Thermal; Ultrasonic; Tapered Hole
- Length: 0.1150 to 0.3000
from RS Components, Ltd.
M3 BRASS HEAT INSTALL INSERT FLANGE [See More]
- Material: Brass
- Length: 0.2244
- Internal Thread Size: M3
- Units: Metric
from PennEngineering®
Blind-end protects the threads from plastic intrusion. [See More]
- Material: Brass
- Base Materials: Metal
- Installation Method: Molded-In
- Units: Metric
from SPIROL
Series 19 Straight Hole and Series 20 Flanged — Designed for straight holes to yield maximum performance with low radial stress. [See More]
- Material: Aluminum; Brass
- Base Materials: Plastic; Thermoplastics
- Installation Method: Thermal; Ultrasonic
- External Thread Size: Tapered Knurl and Groove
from RS Components, Ltd.
M4 BRASS HEAT INSTALL INSERT FLANGE [See More]
- Material: Brass
- Length: 0.3228
- Internal Thread Size: M4
- Units: Metric
from PennEngineering®
Pilot diameter and undercuts allow plastic to flow into grooves providing high pullout resistance. [See More]
- Material: Brass
- Base Materials: Metal
- Installation Method: Molded-In
- Units: Metric
from SPIROL
Series 19 Straight Hole and Series 20 Flanged — Designed for straight holes to yield maximum performance with low radial stress. [See More]
- Material: Aluminum; Brass
- Base Materials: Plastic; Thermoplastics
- Installation Method: Thermal; Ultrasonic
- Length: 0.1250 to 0.5000
from RS Components, Ltd.
M5 BRASS HEAT INSTALL INSERT FLANGE [See More]
- Material: Brass
- Length: 0.3740
- Internal Thread Size: M5
- Units: Metric
from PennEngineering®
Uniform knurl diameter reduces the risk of sink marks. Available in varying lengths for injection molding assemblies. [See More]
- Material: Brass
- Base Materials: Metal
- Installation Method: Molded-In
- Length: 0.3937
from SPIROL
Series 29 Standard and Series 30 Flanged — Symmetrical for ease of orientation and enhanced performance designed to maximize torque and pull out values. [See More]
- Material: Aluminum; Brass
- Base Materials: Plastic; Thermoplastics
- Installation Method: Thermal; Ultrasonic
- External Thread Size: Tapered Knurl and Groove
from RS Components, Ltd.
M6 BRASS HEAT INSTALL INSERT FLANGE [See More]
- Material: Brass
- Length: 0.5000
- Internal Thread Size: M6
- Units: Metric
from PennEngineering®
Features: Press-fit insert with strong, reusable threads. No heat or ultrasonics required. Flange-head eliminates direct contact of plastic with mating parts. Slotted insert compresses allowing easy access into the mounting hole. Aluminum inserts ideal for light weight designs. Aluminum inserts... [See More]
- Material: Aluminum; Brass
- Base Materials: Metal
- Installation Method: Pressed-In; Threaded Hole
- Units: Inch
from SPIROL
Series 29 Standard and Series 30 Flanged — Symmetrical for ease of orientation and enhanced performance designed to maximize torque and pull out values. [See More]
- Material: Aluminum; Brass
- Base Materials: Plastic; Thermoplastics
- Installation Method: Thermal; Ultrasonic
- External Thread Size: Headed Tapered Knurl and Groove
from RS Components, Ltd.
Brass push in expansion insert,M3 flush [See More]
- Material: Brass
- Length: 0.1882
- Internal Thread Size: M3
- Units: Metric
from PennEngineering®
Press-fit insert with strong, reusable threads. No heat or ultrasonics required. Flange-head eliminates direct contact of plastic with mating parts. Slotted insert compresses allowing easy access into the mounting hole [See More]
- Material: Brass
- Base Materials: Metal
- Installation Method: Pressed-In
- Units: Metric
from SPIROL
Series 29 Standard and Series 30 Flanged — Symmetrical for ease of orientation and enhanced performance designed to maximize torque and pull out values. [See More]
- Material: Aluminum; Brass
- Base Materials: Plastic; Thermoplastics
- Installation Method: Thermal; Ultrasonic
- External Thread Size: Tapered Knurl and Groove
from RS Components, Ltd.
Brass push in expansion insert,M3.5flush [See More]
- Material: Brass
- Length: 0.2500
- Internal Thread Size: M3.5
- Units: Metric
from PennEngineering®
Press-fit insert with strong, reusable threads. No heat or ultrasonics required. Straight knurling at the top end of the insert offers higher torsional resistance. Slotted insert compresses allowing easy access into the mounting hole. [See More]
- Material: Brass
- Base Materials: Metal
- Installation Method: Pressed-In
- Units: Metric
from SPIROL
Series 29 Standard and Series 30 Flanged — Symmetrical for ease of orientation and enhanced performance designed to maximize torque and pull out values. [See More]
- Material: Aluminum; Brass
- Base Materials: Plastic; Thermoplastics
- Installation Method: Thermal; Ultrasonic
- External Thread Size: Headed Tapered Knurl and Groove
from RS Components, Ltd.
Brass push in expansion insert,M4 flush [See More]
- Material: Brass
- Length: 0.3130
- Internal Thread Size: M4
- Units: Metric
from PennEngineering®
Press-fit insert with strong, reusable threads. No heat or ultrasonics required. Slotted insert compresses allowing easy access into the mounting hole. [See More]
- Material: Brass
- Base Materials: Metal
- Installation Method: Pressed-In
- Units: Metric
from SPIROL
Brass threaded Inserts for Maximum Pull-Out and Torque Performance [See More]
- Material: Brass
- Base Materials: Plastic; Thermoplastics
- Installation Method: Molded-In
- Length: 0.3130 to 0.8130
from RS Components, Ltd.
Brass push in expansion insert,M5 flush [See More]
- Material: Brass
- Length: 0.3681
- Internal Thread Size: M5
- Units: Metric
from PennEngineering®
Features: Press-fit insert with strong, reusable threads. No heat or ultrasonics required. Straight knurling at the top end of the insert offers higher torsional resistance. Slotted insert compresses allowing easy access into the mounting hole. Aluminum inserts ideal for light weight designs. [See More]
- Material: Aluminum; Brass
- Base Materials: Metal
- Installation Method: Pressed-In; Threaded Hole
- Units: Inch
from SPIROL
Series 65 Blind End and Series 63 Through Hole - Molded-In Inserts are designed for maximum pull-out and torque performance, and are often the Insert of choice for thermosets and engineered plastics with a high percentage of filler. The minor thread diameter tolerance is controlled to ensure... [See More]
- Material: Brass
- Base Materials: Plastic
- Installation Method: Thermal; Ultrasonic; Molded-In; Pressed-In; Self-tapping
- Length: 0.3800 to 0.6970
from RS Components, Ltd.
Brass push in expansion insert,M6 flush [See More]
- Material: Brass
- Length: 0.5000
- Internal Thread Size: M6
- Units: Metric
from PennEngineering®
Creating reliable threaded connections in plastic components demands a fastener that delivers on both pullout strength and torque resistance without complex installation requirements. The new SI ® Solid Body Press-In Insert with Retention Fin Design provides exceptional performance where it... [See More]
- Material: Aluminum; Brass; Stainless Steel
- Base Materials: Plastic
- Installation Method: Pressed-In
- Hole: Straight
from SPIROL
Brass threaded Inserts for Maximum Pull-Out and Torque Performance [See More]
- Material: Brass
- Base Materials: Plastic; Thermoplastics
- Installation Method: Molded-In
- Length: 0.2190 to 0.5620
from RS Components, Ltd.
Brass push in expansion insert,M3 flange [See More]
- Material: Brass
- Length: 0.1882
- Internal Thread Size: M3
- Units: Metric
from PennEngineering®
Features and Benefits. Designed for use in straight holes. Self-aligning lead-in of insert provides for accurate alignment prior to installation. Aluminum inserts ideal for light weight designs. Aluminum and stainless steel inserts offer lead-free alternative. [See More]
- Material: Aluminum; Brass; Stainless Steel
- Base Materials: Metal
- Installation Method: Threaded Hole; Heat Staking
- Units: Inch
from SPIROL
Series 65 Blind End and Series 63 Through Hole - Molded-In Inserts are designed for maximum pull-out and torque performance, and are often the Insert of choice for thermosets and engineered plastics with a high percentage of filler. The minor thread diameter tolerance is controlled to ensure... [See More]
- Material: Brass
- Base Materials: Plastic
- Installation Method: Thermal; Ultrasonic; Molded-In; Pressed-In; Self-tapping
- Length: 0.2560 to 0.4630
from RS Components, Ltd.
Brass pushin expansion insert,M3.5flange [See More]
- Material: Brass
- Length: 0.2500
- Internal Thread Size: M3.5
- Units: Metric
from PennEngineering®
Features and Benefits. Designed for use in straight or tapered holes. Symmetrical design eliminates the need for orientation. Aluminum inserts ideal for light weight designs. Aluminum and stainless steel inserts offer lead-free alternative. [See More]
- Material: Aluminum; Brass; Stainless Steel
- Base Materials: Metal
- Installation Method: Threaded Hole; Heat Staking
- Units: Inch
from SPIROL
Series 50 Symmetrical and Series 51 Headed — Offered in aluminum and brass, Press-In Inserts are designed to be pressed into a plastic hole without melting the plastic prior to installation. They offer rapid installation with no specialized equipment and achieve good overall joint performance. [See More]
- Material: Aluminum; Brass
- Base Materials: Plastic; Thermoset / Thermoplastic
- Installation Method: Pressed-In
- External Thread Size: Helical Knurl
from RS Components, Ltd.
Brass push in expansion insert,M4 flange [See More]
- Material: Brass
- Length: 0.3130
- Internal Thread Size: M4
- Units: Metric
from PennEngineering®
Features and Benefits. Designed for use in tapered holes. Tapered mounting hole allows for rapid and accurate alignment prior to installation. Aluminum inserts ideal for light weight designs. Aluminum and stainless steel inserts offer lead-free alternative. [See More]
- Material: Aluminum; Brass; Stainless Steel
- Base Materials: Metal
- Installation Method: Ultrasonic
-
Internal Thread Size: .060 - .375 in
from SPIROL
Series 50 Symmetrical and Series 51 Headed — Offered in aluminum and brass, Press-In Inserts are designed to be pressed into a plastic hole without melting the plastic prior to installation. They offer rapid installation with no specialized equipment and achieve good overall joint performance. [See More]
- Material: Aluminum; Brass
- Base Materials: Plastic; Thermoset / Thermoplastic
- Installation Method: Pressed-In
- External Thread Size: Headed Helical Knurl
from RS Components, Ltd.
Brass push in expansion insert,M5 flange [See More]
- Material: Brass
- Length: 0.3752
- Internal Thread Size: M5
- Units: Metric
from PennEngineering®
Features: Pilot diameter and undercuts allow plastic to flow into grooves providing high pullout resistance. Aluminum inserts ideal for light weight designs. Aluminum and stainless steel inserts offer lead-free alternative. [See More]
- Material: Aluminum; Brass; Stainless Steel
- Base Materials: Metal
- Installation Method: Molded-In; Threaded Hole
- Units: Inch
from SPIROL
Thread Forming Self-Tapping Inserts. reduced thread profile and coarse pitch minimizes radial stress and potential hole wall damage. The course thread also maximizes the pull-out strength of these Self-Tapping Inserts. Self Tapping Inserts are versatile. They can be used in more plastics, including... [See More]
- Material: Brass
- Base Materials: Plastic; Thermoset / Thermoplastic
- Installation Method: Self-tapping
- External Thread Size: Self-Tapping Coarse Threads
from RS Components, Ltd.
Brass push in expansion insert,M6 flange [See More]
- Material: Brass
- Length: 0.5000
- Internal Thread Size: M6
- Units: Metric
from PennEngineering®
Features: Press-fit insert with strong, reusable threads. No heat or ultrasonics required. Slotted insert compresses allowing easy access into the mounting hole. Aluminum inserts ideal for light weight designs. Aluminum inserts offer lead-free alternative. [See More]
- Material: Aluminum; Brass
- Base Materials: Metal
- Installation Method: Pressed-In; Threaded Hole
- Units: Inch
from Stanley Engineered Fastening - Spiralock
This versatile and economical insert offers a variety of installation methods – thermal, ultrasonic or pressed – for applications in wood, particle board, plastic and most soft materials. Slightly curved hooks lock into material, providing exceptional resistance to pull-out. These... [See More]
- Material: Brass
- Base Materials: Plastic; Wood; Particle Board, Most Soft Materials
- Installation Method: Thermal; Ultrasonic; Pressed-In
- Internal Thread Size: 2-56, Metric Also Available
from Reid Supply
Knife Thread inserts for hard wood significantly reduce the possibility of stripping when using a threaded fasteners in materials such as oak, cherry, and maple. Ideal for applications ranging from furniture to cabinetry to storm shutters. . This Brass goes into a .375 in diameter hole. It has a N/A... [See More]
- Material: Brass; Brass
- Internal Thread Size: #10-32
- Installation Method: Threaded Hole
- Length: 0.5000
from Sherex Fastening Solutions
Designed for SMC, Thermoset, and other brittle plastics. No flange allows for flush installation. Installed with a tap wrench or drill press with tapping head. Class 2B per ANSI/ASME B1.1. Installation Methods: Thread In - this method is reserved for the B1T and B2T insert styles. A tool will thread... [See More]
- Material: Brass
- Base Materials: Metal
- Installation Method: Thread In
- Internal Thread Size: #8-32 UNC
from Tri-Star Industries, Inc.
Our MB Series threaded insert is designed to be molded into the plastic component during the molding cycle. Typically, the insert is placed on a core pin in the mold during the molding cycle. The insert is designed with aggressive knurling and undercuts to resist rotational and tensile pull loads. [See More]
- Material: Aluminum (optional feature); Brass; Steel (optional feature); Stainless Steel (optional feature)
- Base Materials: Plastic
- Installation Method: Molded-In
- Length: 0.1560 to 0.8900
from TFC Ltd.
Provides a strong, wear-resistant and vibration-proof fastening in soft plastics, wood/fibre materials and composite materials. Material: Brass. To specify: Use Part No as stated e.g. S822-0040-80 [See More]
- Material: Brass
- Base Materials: Metal
from Yardley Inserts
Hex shape provides torque and pull-out resistance [See More]
- Material: Brass
- Base Materials: Plastic; Thermoset, Glass-filled Plastic
- Installation Method: Molded-In
- Internal Thread Size: M3.0 x 0.5
from Reid Supply
Press fit thread inserts are used for cored or drilled holes in plastics. They are designed to replace molded-in inserts or threads in plastic castings. Provides clean threads and screw locking action not obtainable in molded-in inserts. Available in brass or stainless steel. . This brass finserts... [See More]
- Material: Brass; Brass
- Internal Thread Size: #6-32
- Installation Method: Pressed-In; Threaded Hole
- Length: 0.1880
from Sherex Fastening Solutions
Designed for SMC, Thermoset, and other brittle plastics. Flange provides larger bearing surface. Installed with a tap wrench or drill press with tapping head. 6H ISO METRIC. Installation Methods: Thread In - this method is reserved for the B1T and B2T insert styles. A tool will thread the inserts... [See More]
- Material: Brass
- Base Materials: Metal
- Installation Method: Thread In
- Internal Thread Size: M4X0.7 ISO
from Tri-Star Industries, Inc.
Our MC-Series insert is designed to be molded into Plastics, Rubber & Ceramics. The insert is designed with aggressive diamond knurling that provides high resistance to tensile pull and rotational torque loads. It has a closed bottom and a controlled minor diameter which provides for accurate... [See More]
- Material: Brass
- Base Materials: Plastic; Rubber; Ceramic
- Installation Method: Molded-In
- Length: 0.1870 to 0.9370
from TFC Ltd.
For use in most plastics including thermosetting, providing high and consistent pull-out strength. Material: Brass. Finish: Self-colour [See More]
- Material: Brass
- Base Materials: Metal
from Reid Supply
Press fit thread inserts are used for cored or drilled holes in plastics. They are designed to replace molded-in inserts or threads in plastic castings. Provides clean threads and screw locking action not obtainable in molded-in inserts. Available in brass or stainless steel. . This Brass press... [See More]
- Material: Brass; Brass
- Internal Thread Size: #4-40
- Installation Method: Pressed-In; Threaded Hole
- Length: 0.1880
from Tri-Star Industries, Inc.
Some thermoplastics, like polycarbonates and structural foams, are brittle – especially in thin-wall applications. Designed for straight holes using ultrasonic or thermal processes, our chevron threaded inserts for plastic add considerable strength. They are our most popular brass inserts,... [See More]
- Material: Brass; Stainless Steel (optional feature)
- Base Materials: Plastic; Structural Foam
- Installation Method: Thermal; Ultrasonic
- Internal Thread Size: 1/8 NPT
from TFC Ltd.
For post-mounting into thermoplastic materials via heat transfer or cold press-in. Material: Brass. To specify: Type followed by thread size. e.g. SINS19-M3L [See More]
- Material: Brass
- Base Materials: Metal
from Reid Supply
Press fit thread inserts are used for cored or drilled holes in plastics. They are designed to replace molded-in inserts or threads in plastic castings. Provides clean threads and screw locking action not obtainable in molded-in inserts. Available in brass or stainless steel. . This brass finserts... [See More]
- Material: Brass; Brass
- Internal Thread Size: 1/4-20
- Installation Method: Pressed-In; Threaded Hole
- Length: 0.3750
from Tri-Star Industries, Inc.
Our business philosophy encourages success through the teamwork concept. Included in this philosophy is the relationship created between Tri-Star and you, the customer. Design Engineering starts the process of building this partnership. We take pride in our ability to design custom inserts... [See More]
- Material: Aluminum (optional feature); Brass; Steel (optional feature); Stainless Steel (optional feature)
- Base Materials: Plastic; Rubber; Ceramic
- Installation Method: Thermal; Ultrasonic; Molded-In; Pressed-In
- Units: Inch; Metric
from TFC Ltd.
For post-mounting into thermoplastic materials via heat transfer or cold press-in. Material: Brass. To specify: Type followed by thread size. e.g. SINS19-M3S [See More]
- Material: Brass
- Base Materials: Metal
from Reid Supply
Press fit thread inserts are used for cored or drilled holes in plastics. They are designed to replace molded-in inserts or threads in plastic castings. Provides clean threads and screw locking action not obtainable in molded-in inserts. Available in brass or stainless steel. . This brass finserts... [See More]
- Material: Brass; Brass
- Internal Thread Size: #10-32
- Installation Method: Pressed-In; Threaded Hole
- Length: 0.5630
from Tri-Star Industries, Inc.
Our HC Series headed chevron threaded inserts offer the same benefits as the C Series, plus a flanged head for a greater load-bearing surface in weaker plastics. This headed insert offers a large contact area for electrical connections and greater pull-out strengths for reverse entry applications. [See More]
- Material: Brass; Stainless Steel (optional feature)
- Base Materials: Plastic; Structural Foam
- Installation Method: Thermal; Ultrasonic
- Length: 0.1570 to 0.5000
from TFC Ltd.
A hexagonal grooved insert offering an economic alternative to the more traditional round knurled insert. The hexagon size is typically 2mm larger than the thread size. Available in both blind and thru' styles. Material: Brass. To specify: Type followed by size. e.g. M6 x 10mm length - STQ-M6-10. [See More]
- Material: Brass
- Base Materials: Metal
from Reid Supply
Press fit thread inserts are used for cored or drilled holes in plastics. They are designed to replace molded-in inserts or threads in plastic castings. Provides clean threads and screw locking action not obtainable in molded-in inserts. Available in brass or stainless steel. . This Brass press... [See More]
- Material: Brass; Brass
- Internal Thread Size: #2-56
- Installation Method: Pressed-In; Threaded Hole
- Length: 0.1560
from Tri-Star Industries, Inc.
Our MT-Series insert is designed to be molded into Plastics, Rubber & Ceramics. The insert is designed with aggressive diamond knurling that provides high resistance to tensile pull and rotational torque loads. It also has a controlled minor diameter which provides for accurate positioning on... [See More]
- Material: Brass
- Base Materials: Plastic; Rubber; Ceramic
- Installation Method: Molded-In
- Length: 0.1560 to 0.8750
from TFC Ltd.
A round, knurled and grooved insert, suitable for most applications and processes, giving an excellent uniform grip. Available in both blind and thru' styles. Material: Brass. To specify: Type followed by size. e.g. M6 x 10mm length - SUG-M6-10. Add 'B' for blind end e.g. SUG-M6-10-B [See More]
- Material: Brass
- Base Materials: Metal
from Reid Supply
Self tapping thread inserts are screwed into preformed or predrilled holes and cut their own threads into the wall for permanent installation. Eliminates the time and expense of tapping Our assortment of self tapping thread inserts are suitable for plastics, wood, and light metal alloys. . This self... [See More]
- Material: Brass; Brass
- Internal Thread Size: #6-32
- Installation Method: Threaded Hole; Self-tapping
- Length: 0.3150
from Tri-Star Industries, Inc.
P & HP Series press-in threaded inserts for plastics provide adequate holding strengths without the use of ultrasonic or heat equipment. These straight-hole threaded inserts are most commonly used in thermoset or other hard plastics. The pilot end provides for fast alignment. The insert is... [See More]
- Material: Brass
- Base Materials: Plastic
- Installation Method: Pressed-In
- Length: 0.1570 to 0.3640
from TFC Ltd.
A symmetrical insert, quick to install either cold, or by heat transfer. Material: Brass (-80). Finish: Self-colour. To specify: Type - bolt size - length. e.g. SAS - M3 [See More]
- Material: Brass
- Base Materials: Metal
from Tri-Star Industries, Inc.
Say goodbye to expensive part orientation high-volume feeding mechanisms. Our symmetrical threaded inserts for plastic can be installed either end first for faster installation (using ultrasonic or thermal equipment) and lower costs. By decreasing outward hoop stress, symmetrical threaded inserts... [See More]
- Material: Brass; Stainless Steel (optional feature)
- Base Materials: Plastic
- Installation Method: Thermal; Ultrasonic
- Length: 0.1150 to 0.5000
from TFC Ltd.
For use in thermosetting plastics providing strong, wear-resistant threads. Installation is by simple press-in method. Material: Brass (-80). Finish: Self-colour. To specify: Type - Thread size - Material. e.g. S850-0030-80 [See More]
- Material: Brass
- Base Materials: Metal
from Tri-Star Industries, Inc.
H Series tapered threaded inserts for plastics outperform all competitive inserts for ultrasonic and thermal installation into thermoplastic or structural foam. Our customers confirm it. We ’ve eliminated the outward stress that occurs with other insert designs during the installation process. [See More]
- Material: Brass; Stainless Steel (optional feature)
- Base Materials: Plastic; Structural Foam
- Installation Method: Thermal; Ultrasonic
- Length: 0.1880 to 0.6250
from TFC Ltd.
Type SINS10 - Thread-forming insert for ductile materials. Type SINS13 - Thread-cutting insert for brittle materials. Material: Brass. To specify: Type followed by thread size, e.g. SINS13 M4 [See More]
- Material: Brass
- Base Materials: Metal
from TFC Ltd.
Solid compression limiters provide a strong and reliable defence against the stresses caused by fastener torque. Installed by heat transfer or simple press-in. Material: Brass. Finish: Self-colour. Length & wall thickness: To suit any application. To specify: Type - Bolt size - Length e.g. SCLB - M6... [See More]
- Material: Brass
- Base Materials: Metal
from TFC Ltd.
Heat-installed inserts for use in stress-sensitive materials. Material: Brass (-80). To specify: Type - Thread size - Material. e.g. M4 Brass - S863-0040-80. Note: Headed version available to special order only - Type S863H [See More]
- Material: Brass
- Base Materials: Metal
from TFC Ltd.
For post moulding into thermoplastic materials, where a symmetrical insert is required. Material: Brass. To specify: Type followed by thread size. e.g. SINS 29L M3.0 [See More]
- Material: Brass
- Base Materials: Metal
from TFC Ltd.
For post moulding into thermoplastic materials these ultrasonic inserts provide strong wear-resistant threads. Can also be installed by heat transfer. Material: Brass (-80). Stainless steel (-50). To specify: Type - Thread size - Material. e.g. Headed M3 Brass - S862-0030-80. Note: Stainless steel... [See More]
- Material: Brass; Stainless Steel
- Base Materials: Metal
from TFC Ltd.
For use in most plastics including thermosetting, providing high and consistent pull-out strength. Material: Brass. Finish: Self-colour [See More]
- Material: Brass
- Base Materials: Metal