Plastic Threaded Inserts
from SPIROL
Series 14 Tapered Hole — Tapered design for tapered holes for ease of location and reduced installation time. [See More]
- Base Materials: Plastic; Thermoplastics
- Length: 0.1880 to 0.5620
- Installation Method: Thermal; Ultrasonic
- Hole: Tapered
from PennEngineering®
Creating reliable threaded connections in plastic components demands a fastener that delivers on both pullout strength and torque resistance without complex installation requirements. The new SI ® Solid Body Press-In Insert with Retention Fin Design provides exceptional performance where it... [See More]
- Base Materials: Plastic
- Hole: Straight
- Installation Method: Pressed-In
- Material: Aluminum; Brass; Stainless Steel
from SPIROL
Series 19 Straight Hole and Series 20 Flanged — Designed for straight holes to yield maximum performance with low radial stress. [See More]
- Base Materials: Plastic; Thermoplastics
- Length: 0.1570 to 0.5000
- Installation Method: Thermal; Ultrasonic
- Hole: Straight
from SPIROL
Series 19 Straight Hole and Series 20 Flanged — Designed for straight holes to yield maximum performance with low radial stress. [See More]
- Base Materials: Plastic; Thermoplastics
- External Thread Size: Headed Tapered Knurl and Groove
- Installation Method: Thermal; Ultrasonic
- Length: 0.1250 to 0.5000
from SPIROL
Series 29 Standard and Series 30 Flanged — Symmetrical for ease of orientation and enhanced performance designed to maximize torque and pull out values. [See More]
- Base Materials: Plastic; Thermoplastics
- Length: 0.1570 to 0.5000
- Installation Method: Thermal; Ultrasonic
- Hole: Straight
from SPIROL
Series 29 Standard and Series 30 Flanged — Symmetrical for ease of orientation and enhanced performance designed to maximize torque and pull out values. [See More]
- Base Materials: Plastic; Thermoplastics
- Length: 0.1570 to 0.5000
- Installation Method: Thermal; Ultrasonic
- Hole: Straight
from SPIROL
Series 14 Tapered Hole — Tapered design for tapered holes for ease of location and reduced installation time. [See More]
- Base Materials: Plastic; Thermoplastics
- Length: 0.1150 to 0.3000
- Installation Method: Thermal; Ultrasonic; Tapered Hole
- Hole: Tapered
from SPIROL
Series 19 Straight Hole and Series 20 Flanged — Designed for straight holes to yield maximum performance with low radial stress. [See More]
- Base Materials: Plastic; Thermoplastics
- External Thread Size: Tapered Knurl and Groove
- Installation Method: Thermal; Ultrasonic
- Length: 0.1250 to 0.5000
from SPIROL
Series 19 Straight Hole and Series 20 Flanged — Designed for straight holes to yield maximum performance with low radial stress. [See More]
- Base Materials: Plastic; Thermoplastics
- Length: 0.1250 to 0.5000
- Installation Method: Thermal; Ultrasonic
- Hole: Straight
from SPIROL
Series 29 Standard and Series 30 Flanged — Symmetrical for ease of orientation and enhanced performance designed to maximize torque and pull out values. [See More]
- Base Materials: Plastic; Thermoplastics
- External Thread Size: Tapered Knurl and Groove
- Installation Method: Thermal; Ultrasonic
- Length: 0.1250 to 0.5000
from SPIROL
Series 29 Standard and Series 30 Flanged — Symmetrical for ease of orientation and enhanced performance designed to maximize torque and pull out values. [See More]
- Base Materials: Plastic; Thermoplastics
- External Thread Size: Headed Tapered Knurl and Groove
- Installation Method: Thermal; Ultrasonic
- Length: 0.1250 to 0.5000
from SPIROL
Series 29 Standard and Series 30 Flanged — Symmetrical for ease of orientation and enhanced performance designed to maximize torque and pull out values. [See More]
- Base Materials: Plastic; Thermoplastics
- External Thread Size: Tapered Knurl and Groove
- Installation Method: Thermal; Ultrasonic
- Length: 0.1250 to 0.5000
from SPIROL
Series 29 Standard and Series 30 Flanged — Symmetrical for ease of orientation and enhanced performance designed to maximize torque and pull out values. [See More]
- Base Materials: Plastic; Thermoplastics
- External Thread Size: Headed Tapered Knurl and Groove
- Installation Method: Thermal; Ultrasonic
- Length: 0.1250 to 0.5000
from SPIROL
Brass threaded Inserts for Maximum Pull-Out and Torque Performance [See More]
- Base Materials: Plastic; Thermoplastics
- Length: 0.3130 to 0.8130
- Installation Method: Molded-In
- Hole: Straight
from SPIROL
Series 65 Blind End and Series 63 Through Hole - Molded-In Inserts are designed for maximum pull-out and torque performance, and are often the Insert of choice for thermosets and engineered plastics with a high percentage of filler. The minor thread diameter tolerance is controlled to ensure... [See More]
- Base Materials: Plastic
- Length: 0.3800 to 0.6970
- Installation Method: Thermal; Ultrasonic; Molded-In; Pressed-In; Self-tapping
- Hole: Straight
from SPIROL
Brass threaded Inserts for Maximum Pull-Out and Torque Performance [See More]
- Base Materials: Plastic; Thermoplastics
- Length: 0.2190 to 0.5620
- Installation Method: Molded-In
- Hole: Straight
from SPIROL
Series 65 Blind End and Series 63 Through Hole - Molded-In Inserts are designed for maximum pull-out and torque performance, and are often the Insert of choice for thermosets and engineered plastics with a high percentage of filler. The minor thread diameter tolerance is controlled to ensure... [See More]
- Base Materials: Plastic
- Length: 0.2560 to 0.4630
- Installation Method: Thermal; Ultrasonic; Molded-In; Pressed-In; Self-tapping
- Hole: Straight
from SPIROL
Series 50 Symmetrical and Series 51 Headed — Offered in aluminum and brass, Press-In Inserts are designed to be pressed into a plastic hole without melting the plastic prior to installation. They offer rapid installation with no specialized equipment and achieve good overall joint performance. [See More]
- Base Materials: Plastic; Thermoset / Thermoplastic
- External Thread Size: Helical Knurl
- Installation Method: Pressed-In
- Length: 0.1250 to 0.3750
from SPIROL
Series 50 Symmetrical and Series 51 Headed — Offered in aluminum and brass, Press-In Inserts are designed to be pressed into a plastic hole without melting the plastic prior to installation. They offer rapid installation with no specialized equipment and achieve good overall joint performance. [See More]
- Base Materials: Plastic; Thermoset / Thermoplastic
- External Thread Size: Headed Helical Knurl
- Installation Method: Pressed-In
- Length: 0.1250 to 0.3750
from SPIROL
Thread Forming Self-Tapping Inserts. reduced thread profile and coarse pitch minimizes radial stress and potential hole wall damage. The course thread also maximizes the pull-out strength of these Self-Tapping Inserts. Self Tapping Inserts are versatile. They can be used in more plastics, including... [See More]
- Base Materials: Plastic; Thermoset / Thermoplastic
- External Thread Size: Self-Tapping Coarse Threads
- Installation Method: Self-tapping
- Length: 0.2500 to 0.4280
from Stanley Engineered Fastening - Spiralock
These inserts are designed to have the plastic molded around them in the mold cavity. This process involves the placement of “core pins ” into the minor diameter of the inserts prior to molding the plastic. Once the molding operation is complete, the “core pins ” are removed,... [See More]
- Base Materials: Plastic
- Internal Thread Size: 2-56
- Installation Method: Molded-In
- External Thread Size: 0.156" Dia.
from Tri-Star Industries, Inc.
Our MB Series threaded insert is designed to be molded into the plastic component during the molding cycle. Typically, the insert is placed on a core pin in the mold during the molding cycle. The insert is designed with aggressive knurling and undercuts to resist rotational and tensile pull loads. [See More]
- Base Materials: Plastic
- Length: 0.1560 to 0.8900
- Installation Method: Molded-In
- Units: Inch; Metric
from Long-Lok Fasteners Corporation
T-Sert ® inserts require no locking rings or other separate locking devices. An integral, self-locking element extends longitudinally through the wall of the insert, and provides simultaneous locking action for both internal and external threads in accordance with MIL- I-45932. The torque... [See More]
- Base Materials: Plastic; Metal; Aluminum, Magnesium
- Length: 0.1900 to 0.7500
- Installation Method: Threaded Hole
- Units: Inch
from Yardley Inserts
Hex shape provides torque and pull-out resistance [See More]
- Base Materials: Plastic; Thermoset, Glass-filled Plastic
- Internal Thread Size: M3.0 x 0.5
- Installation Method: Molded-In
- Length: 0.3130
from Tri-Star Industries, Inc.
Our MC-Series insert is designed to be molded into Plastics, Rubber & Ceramics. The insert is designed with aggressive diamond knurling that provides high resistance to tensile pull and rotational torque loads. It has a closed bottom and a controlled minor diameter which provides for accurate... [See More]
- Base Materials: Plastic; Rubber; Ceramic
- Length: 0.1870 to 0.9370
- Installation Method: Molded-In
- Units: Inch; Metric
from Tri-Star Industries, Inc.
Some thermoplastics, like polycarbonates and structural foams, are brittle – especially in thin-wall applications. Designed for straight holes using ultrasonic or thermal processes, our chevron threaded inserts for plastic add considerable strength. They are our most popular brass inserts,... [See More]
- Base Materials: Plastic; Structural Foam
- Internal Thread Size: 1/8 NPT
- Installation Method: Thermal; Ultrasonic
- Length: 0.1000 to 0.6250
from Tri-Star Industries, Inc.
Our business philosophy encourages success through the teamwork concept. Included in this philosophy is the relationship created between Tri-Star and you, the customer. Design Engineering starts the process of building this partnership. We take pride in our ability to design custom inserts... [See More]
- Base Materials: Plastic; Rubber; Ceramic
- Units: Inch; Metric
- Installation Method: Thermal; Ultrasonic; Molded-In; Pressed-In
- Material: Aluminum (optional feature); Brass; Steel (optional feature); Stainless Steel (optional feature)
from Tri-Star Industries, Inc.
Our HC Series headed chevron threaded inserts offer the same benefits as the C Series, plus a flanged head for a greater load-bearing surface in weaker plastics. This headed insert offers a large contact area for electrical connections and greater pull-out strengths for reverse entry applications. [See More]
- Base Materials: Plastic; Structural Foam
- Length: 0.1570 to 0.5000
- Installation Method: Thermal; Ultrasonic
- Hole: Straight
from Tri-Star Industries, Inc.
Our MT-Series insert is designed to be molded into Plastics, Rubber & Ceramics. The insert is designed with aggressive diamond knurling that provides high resistance to tensile pull and rotational torque loads. It also has a controlled minor diameter which provides for accurate positioning on... [See More]
- Base Materials: Plastic; Rubber; Ceramic
- Length: 0.1560 to 0.8750
- Installation Method: Molded-In
- Units: Inch; Metric
from Tri-Star Industries, Inc.
P & HP Series press-in threaded inserts for plastics provide adequate holding strengths without the use of ultrasonic or heat equipment. These straight-hole threaded inserts are most commonly used in thermoset or other hard plastics. The pilot end provides for fast alignment. The insert is... [See More]
- Base Materials: Plastic
- Length: 0.1570 to 0.3640
- Installation Method: Pressed-In
- Hole: Straight
from Tri-Star Industries, Inc.
Say goodbye to expensive part orientation high-volume feeding mechanisms. Our symmetrical threaded inserts for plastic can be installed either end first for faster installation (using ultrasonic or thermal equipment) and lower costs. By decreasing outward hoop stress, symmetrical threaded inserts... [See More]
- Base Materials: Plastic
- Length: 0.1150 to 0.5000
- Installation Method: Thermal; Ultrasonic
- Hole: Straight
from Tri-Star Industries, Inc.
H Series tapered threaded inserts for plastics outperform all competitive inserts for ultrasonic and thermal installation into thermoplastic or structural foam. Our customers confirm it. We ’ve eliminated the outward stress that occurs with other insert designs during the installation process. [See More]
- Base Materials: Plastic; Structural Foam
- Length: 0.1880 to 0.6250
- Installation Method: Thermal; Ultrasonic
- Hole: Tapered