Threaded Air Cylinders
Description
Threaded air cylinders are pneumatic devices designed to convert compressed air into mechanical motion. They feature threaded connections that allow for secure attachment to various components within a system. These cylinders are typically used to provide linear motion, which can be utilized in a wide range of mechanical applications.
Working Principle
Threaded air cylinders operate by using compressed air to move a piston within a cylindrical chamber. When air is introduced into the cylinder, it creates pressure against the piston, causing it to move. This movement can be harnessed to perform work, such as pushing, pulling, or lifting loads. The threaded connections ensure that the cylinder is securely mounted and aligned with the system it is integrated into. Pneumatic cylinders are valued for their quick response times and ability to provide precise linear movements, making them useful in applications requiring high torque and speed .
Applications
Threaded air cylinders are commonly used in industrial automation and robotics systems, where they contribute to increased productivity and efficiency. They are also employed in material handling applications, such as moving parts along an assembly line, and in assembly processes where precise positioning is required .
Advantages over other Air Cylinders
One of the primary advantages of threaded air cylinders is their versatility and ease of integration into existing systems. The threaded connections allow for secure and adjustable mounting options, which can be beneficial in applications where precise alignment is critical. Additionally, pneumatic cylinders, in general, are known for their fast response times and ability to operate at high speeds, which can be advantageous in dynamic industrial environments .
Limitations
A notable limitation of pneumatic cylinders, including threaded air cylinders, is the potential for inefficiency due to the compressibility of air. This can result in less precise control compared to other types of actuators, such as hydraulic or electric systems. Additionally, the risk of air contamination from equipment lubricants can lead to increased wear and potential damage to the cylinder .
Considerations
When selecting threaded air cylinders, it is important to consider factors such as initial costs, operating expenses, and maintenance requirements. Pneumatic systems are generally low-cost and simple to maintain, but they may require more frequent maintenance due to potential air contamination and wear. Durability and accuracy should also be evaluated, as the compressibility of air can affect the precision of the cylinder's movements. Proper sizing and selection of the cylinder for the specific application are crucial to achieving optimal performance and efficiency .
from Compact Automation
The Compact ® Composite Cylinder is your complete motion control solution for medical and food grade applications, or wherever lightweight, washdown and corrosion resistance is required. Composite Cylinder ManufacturersWith a wide range of both imperial and metric sizes to choose from, we can... [See More]
- Mounting: Clevis; Double-end Mount; Rear; Threaded
- Operating Pressure: 125 to 150
- Stroke: 4
- Bore Size: 0.5000 to 2
from Compact Automation
Features: Compact envelope. Two external guide rods. Oil impregnated guide bushings. Two mounting surfaces and a large tooling plate. [See More]
- Mounting: Flange (optional feature); Threaded; Multi-Mount Bracket
- Operating Pressure: 250
- Stroke: 0.1250 to 3
- Bore Size: 0.5000 to 3
from Compact Automation
GC3000 features two long guide bushings in the head end. The guide rods do not extend beyond the back of the cylinder body, thus providing a short overall length and low unit weight. [See More]
- Mounting: Flange (optional feature); Threaded; Multi-Mount Bracket
- Bore Size: 0.4724 to 1.57
- Stroke: 0.3937 to 5.91
- Cylinder Configuration: Simple
from Compact Automation
GC4000 features four long guide bushings, two per end. The guide rods extend beyond the back of the cylinder body so when the cylinder extends, four point support reduces deflection and extends the life under full loads. [See More]
- Mounting: Flange (optional feature); Threaded; Multi-Mount Bracket
- Bore Size: 0.4724 to 1.57
- Stroke: 0.3937 to 5.91
- Cylinder Configuration: Simple
from Compact Automation
Turn-Act guided cylinders combine high strength, lightweight extruded bodies and the rigid support of composite or roller ball bearings with enersorb piston to provide an unparalleled guided cylinder product. Features: 4 Base Models. ½, 3/4, 1 ¼ and 2 ½ inch Bores. Lift forces... [See More]
- Mounting: Flange (optional feature); Threaded
- Bore Size: 0.5000 to 2.5
- Stroke: 2 to 8
- Operating Temperature: -20 to 180
from Compact Automation
Multi Act ’s integrated multi position devices include multi position cylinders and multi position actuators, which feature an output shaft that produces both linear and rotary motions and may be operated independently and simultaneously. These devices offer many advantages over single... [See More]
- Mounting: Threaded
- Rated Load/Force: 100
- Stroke: 1 to 4
- Operating Pressure: 35 to 200
from ASCO
The A Series is an aluminum NFPA Interchangeable cylinder line that is designed and built to excel in the most demanding applications. The A Series encompasses many value-added features such as an extra long graphite filled cast iron rod bushing and a standard oversized wear band that is located on... [See More]
- Mounting: Threaded; NFPA
- Operating Pressure: 250
- Stroke: 0.0 to 99
- Bore Size: 1.5 to 6
from Airpot Corporation
Features Force Without Friction ® air bearing technology [See More]
- Mounting: Threaded
- Rated Load/Force: 128
- Stroke: 0.3937 to 11.81
- Operating Pressure: 5 to 100
from Milwaukee Cylinder
MILWAUKEE Series "A" pneumatic cylinders are built to perform on the toughest applications. Incorporating a variety of MILWAUKEE "Exclusive" advanced features, proven through the years, these cylinders will provide a long, maintenance-free service life. Advanced engineering combined with quality... [See More]
- Mounting: Threaded; NFPA; Tie-Rod
- Operating Pressure: 0.0 to 250
- Stroke: 0.0 to 240
- Bore Size: 5
from Parker Hannifin / Automation / Pneumatic - Europe
Dia 16mm to 100mm Bore sizes. Stroke up to 200mm. Flexible porting options. Magnetic pistons as standard. Wear compensating piston seals [See More]
- Mounting: Threaded
- Operating Pressure: 145
- Stroke: 0.3937
- Bore Size: 0.6299
from Cylinders & Valves, Inc.
CYLINDER FEATURES. Non-corrosive throughout. Heavy duty 1/8" brass tube. Extruded brass heads. Polished and ground #303. Stainless steel piston rods. Threaded rods standard. "T" ring piston seal on 2" bore. Adjustable cushions (front and rear) available. SOLENOID FEATURES. 1/8" Diameter Orifice. [See More]
- Mounting: Clevis; Threaded
- Bore Size: 2
- Stroke: 0.0625 to ?
- Shaft Diameter: 0.6250
from Reid Supply
Pneumatic Cylindrical Hold Down Clamps provide activating force for over-center toggle clamps, applying pressure from the top. These cylinders are built to perform repetitive production operations with a magnetic ring for sensing capability. . Brass Inline Connector [See More]
- Mounting: Threaded; Rear Pivot
- Operating Pressure: 250
- Stroke: 6
- Bore Size: 1.5
from PHD, Inc.
Series CTS Compact Guide Rod Cylinders excel in non-rotating cylinder applications where unit length is critical. They also perform as light duty slides where precise location is not required and side loading is limited. Optional shock pads extend cylinder life and minimize piston noise. The shock... [See More]
- Mounting: Foot; Threaded
- Operating Pressure: 20 to 150
- Stroke: 2.75 to 6
- Bore Size: 0.4724 to 2.48
from Eaton Hydraulics Group
T Series - Threaded. With their compact envelope size and robust capabilities, Eaton T-Series threaded cylinders fit many applications, from waste processing and material handling to machine tools and general machinery. Available in standard bore sizes from 20 mm (0.75 in) to 200 mm (8.0 in) and... [See More]
- Mounting: Threaded
- Operating Pressure: 250 to 1000
- Stroke: ? to 180
- Bore Size: 0.7500 to 8
from R&I Manufacturing Co.
DURA-SCAPE CC Series of Economy Non-Rotating Air Cylinders are designed as multi purpose units. The CC series is designed for applications where all the features of our SC series are not required, while still offering the time-tested quality construction and durability you ’ve come to expect. [See More]
- Mounting: Face; Threaded
- Operating Pressure: 40 to 100
- Stroke: 0.7500 to 1.25
- Bore Size: 0.6250
from ASCO
The In Force Cylinder Line is a heavy-duty , steel body cylinder line that is designed and built to exceed all your strenuous application requirements. The ASP Series is an NFPA Steel Body pneumatic cylinder line. The ASP Series encompasses many of the same proven design features as our original... [See More]
- Mounting: Threaded; NFPA
- Operating Pressure: 250
- Stroke: 0.0 to 99
- Bore Size: 1.5 to 6
from Milwaukee Cylinder
MILWAUKEE Series "A" pneumatic cylinders are built to perform on the toughest applications. Incorporating a variety of MILWAUKEE "Exclusive" advanced features, proven through the years, these cylinders will provide a long, maintenance-free service life. Advanced engineering combined with quality... [See More]
- Mounting: Threaded; NFPA; Tie-Rod
- Operating Pressure: 0.0 to 250
- Stroke: 0.0 to 240
- Bore Size: 2
from Cylinders & Valves, Inc.
CYLINDER FEATURES. Non-corrosive throughout. Heavy duty 1/8" brass tube. Extruded brass heads. Polished and ground #303. Stainless steel piston rods. Threaded rods standard. "T" ring piston seal on 2" bore. Adjustable cushions (front and rear) available. SOLENOID FEATURES. 1/8" Diameter Orifice. [See More]
- Mounting: Foot; Threaded
- Bore Size: 2
- Stroke: 0.0625 to ?
- Shaft Diameter: 0.6250
from Reid Supply
Pneumatic Cylindrical Hold Down Clamps provide activating force for over-center toggle clamps, applying pressure from the top. These cylinders are built to perform repetitive production operations with a magnetic ring for sensing capability. . Stud Mount Pneumatic Cylinder [See More]
- Mounting: Threaded; Stud Mount
- Operating Pressure: 250
- Stroke: 1
- Bore Size: 0.3130
from PHD, Inc.
PHDs Series CRS Cylinder features a self-lubricating nitrile piston seal to increase cylinder performance and provides the best unit life rating in its class of 70 million linear inches of travel. In addition, this compact cylinder now features a clear anodized extruded body with integral slots for... [See More]
- Mounting: Clevis (optional feature); Threaded
- Operating Pressure: 10 to 150
- Stroke: 3.25 to 7
- Bore Size: 0.4724 to 2.48
from R&I Manufacturing Co.
DURA-SCAPE SC Series of Non-Rotating Air Cylinders are designed as multi purpose units. These air-operated devices provide the functionality of an air cylinder with the durability and features you ’ve come to expect from R &I. SC units have a single, precision ground, non-rotating, square... [See More]
- Mounting: Face; Threaded
- Operating Pressure: 40 to 100
- Stroke: 0.5000 to 0.7500
- Bore Size: 0.5625 to 1.12
from ASCO
The C Series is a robust compact cylinder line that is designed to fit tight space requirements. The low profile design and variety of mounting options makes this cylinder line extremely popular. Furthermore, its unique style and diversity makes the C Series a one of a kind compact cylinder line. [See More]
- Mounting: Threaded
- Operating Pressure: 250
- Stroke: 0.0 to 20
- Bore Size: 0.7500 to 4
from Milwaukee Cylinder
MILWAUKEE Series "A" pneumatic cylinders are built to perform on the toughest applications. Incorporating a variety of MILWAUKEE "Exclusive" advanced features, proven through the years, these cylinders will provide a long, maintenance-free service life. Advanced engineering combined with quality... [See More]
- Mounting: Face; Rear; Threaded; NFPA; Flush Mount
- Operating Pressure: 0.0 to 250
- Stroke: 0.0 to 240
- Bore Size: 1.5
from Cylinders & Valves, Inc.
CYLINDER FEATURES. Non-corrosive throughout. Heavy duty 1/8" brass tube. Extruded brass heads. Polished and ground #303. Stainless steel piston rods. Threaded rods standard. "T" ring piston seal on 2" bore. Adjustable cushions (front and rear) available. SOLENOID FEATURES. 1/8" Diameter Orifice. [See More]
- Mounting: Threaded; Trunnion
- Bore Size: 2
- Stroke: 0.0625 to ?
- Shaft Diameter: 0.6250
from Reid Supply
Pneumatic Cylindrical Hold Down Clamps provide activating force for over-center toggle clamps, applying pressure from the top. These cylinders are built to perform repetitive production operations with a magnetic ring for sensing capability. . Stud Mount Pneumatic Cylinder [See More]
- Mounting: Threaded; Universal Mount
- Operating Pressure: 250
- Stroke: 0.5000
- Bore Size: 0.6250
from ASCO
The file hard (60RC) high strength aluminum alloy tube provides a smooth corrosion free sealing surface and excellent abrasion resistance. Head and cap are machined from (6061-T6) solid aluminum bar and anodized for corrosion resistance. A recess at the piston mating surface allows the air to work... [See More]
- Mounting: Clevis; Threaded
- Operating Pressure: 250
- Stroke: 0.0 to 99
- Bore Size: 1.25 to 8
from Milwaukee Cylinder
MILWAUKEE Series "MN" pneumatic cylinders are built to perform on the toughest applications. Incorporating a variety of MILWAUKEE "Exclusive" advanced features, proven through the years, these cylinders will provide a long, maintenance-free service life. Advanced engineering combined with quality... [See More]
- Mounting: Face; Threaded; NFPA; Tie-Rod
- Operating Pressure: 0.0 to 250
- Stroke: 0.0 to 240
- Bore Size: 1.5
from Cylinders & Valves, Inc.
CYLINDER FEATURES. Non-corrosive throughout. Heavy duty 1/8" brass tube. Extruded brass heads. Polished and ground #303. Stainless steel piston rods. Threaded rods standard. "T" ring piston seal on 2" bore. Adjustable cushions (front and rear) available. SOLENOID FEATURES. 1/8" Diameter Orifice. [See More]
- Mounting: Double-end Mount; Threaded
- Bore Size: 2
- Stroke: 0.0625 to ?
- Shaft Diameter: 0.6250
from Reid Supply
Pneumatic Cylindrical Hold Down Clamps provide activating force for over-center toggle clamps, applying pressure from the top. These cylinders are built to perform repetitive production operations with a magnetic ring for sensing capability. . Stud Mount Pneumatic Cylinder [See More]
- Mounting: Threaded; Stud Mount
- Operating Pressure: 250
- Stroke: 1
- Bore Size: 1.06
from ASCO
The EQ Series combines cost-effectiveness with proven dependability. It is a repairable OEM NFPA Interchangeable cylinder line that is specifically designed to give our customers an economical alternative. This Non-Lube air cylinder offers elasticity to to tight budgets without sacrificing quality. [See More]
- Mounting: Threaded; NFPA
- Operating Pressure: 250
- Stroke: 0.0 to 48
- Bore Size: 1.5 to 4
from Milwaukee Cylinder
MILWAUKEE Series "MN" pneumatic cylinders are built to perform on the toughest applications. Incorporating a variety of MILWAUKEE "Exclusive" advanced features, proven through the years, these cylinders will provide a long, maintenance-free service life. Advanced engineering combined with quality... [See More]
- Mounting: Rear; Threaded; NFPA; Tie-Rod
- Operating Pressure: 0.0 to 250
- Stroke: 0.0 to 240
- Bore Size: 5
from Cylinders & Valves, Inc.
0-500 PSI, Standard and Heavy Duty Piston Rods. Available in 3/8", 1/2", 3/4", 1-1/8", 1-1/2" And 2" Bores Check Standard Cylinders for Dimension on Tube and Rod End, 3/4" Extension on all Models. All heavy wall 1/8" brass cylinder tubes. Polished and ground #303 stainless steel piston rods. [See More]
- Mounting: Threaded
- Bore Size: 0.3750
- Stroke: 0.0625 to ?
- Cylinder Configuration: Simple
from Reid Supply
Pneumatic Cylindrical Hold Down Clamps provide activating force for over-center toggle clamps, applying pressure from the top. These cylinders are built to perform repetitive production operations with a magnetic ring for sensing capability. . Stud Mount Pneumatic Cylinder [See More]
- Mounting: Threaded; Universal Mount
- Operating Pressure: 250
- Stroke: 1
- Bore Size: 1.06
from ASCO
The F Series is a Non-Rotating NFPA Interchangeable pneumatic cylinder line that provides the solution to specific applications where piston rotation is not acceptable. Our innovative dual rod design provides precision positioning and linear movement. This makes the F Series ideal for a multitude of... [See More]
- Mounting: Threaded; NFPA
- Operating Pressure: 250
- Stroke: 0.0 to 20
- Bore Size: 1.5 to 4
from Cylinders & Valves, Inc.
0-500 PSI, Standard and Heavy Duty Piston Rods. Available in 3/8", 1/2", 3/4", 1-1/8", 1-1/2" And 2" Bores Check Standard Cylinders for Dimension on Tube and Rod End, 3/4" Extension on all Models. All heavy wall 1/8" brass cylinder tubes. Polished and ground #303 stainless steel piston rods. [See More]
- Mounting: Threaded
- Bore Size: 0.3750
- Stroke: 0.0625 to ?
- Cylinder Configuration: Simple
from Reid Supply
Pneumatic Cylindrical Hold Down Clamps provide activating force for over-center toggle clamps, applying pressure from the top. These cylinders are built to perform repetitive production operations with a magnetic ring for sensing capability. . Stud Mount Pneumatic Cylinder [See More]
- Mounting: Threaded; Stud Mount
- Operating Pressure: 250
- Stroke: 1
- Bore Size: 1.25
from ASCO
Head and cap are machined from (6061-T6) solid aluminum bar and anodized for corrosion resistance. A recess at the piston mating surface allows the air to work on a larger effective piston area for faster breakaway. The longer bronze rod bushing provides a maximum load bearing support. The material... [See More]
- Mounting: Threaded; NFPA
- Operating Pressure: 250
- Stroke: 0.0 to 99
- Bore Size: 8 to 14
from Cylinders & Valves, Inc.
SPECIAL FEATURES. 1", 1-1/8", 1-1/2" and 2" bore sizes available from stock. Non-corrosive throughout. Heavy wall tube (1/8" thick brass, pump cylinder finish]. Polished and ground stainless steel piston rods. Threaded rods standard. Aircraft type "O" ring seals (Buna "N" standard compound). 0-150... [See More]
- Mounting: Threaded
- Operating Pressure: 0.0 to 150
- Stroke: 0.0625 to ?
- Bore Size: 1
from Reid Supply
Pneumatic Cylindrical Hold Down Clamps provide activating force for over-center toggle clamps, applying pressure from the top. These cylinders are built to perform repetitive production operations with a magnetic ring for sensing capability. . Stud Mount Pneumatic Cylinder [See More]
- Mounting: Threaded; Universal Mount
- Operating Pressure: 250
- Stroke: 1
- Bore Size: 1.25
from ASCO
The S Series is a stainless steel NFPA Interchangeable pneumatic cylinder line. It is designed and built to perform in the toughest "wash down" applications. The stainless steel construction provides outstanding corrosion resistance while including a multitude of favorable design features. The S... [See More]
- Mounting: Threaded; NFPA
- Operating Pressure: 150
- Stroke: 0.0 to 99
- Bore Size: 1.5 to 8
from Cylinders & Valves, Inc.
SPECIAL FEATURES. 1", 1-1/8", 1-1/2" and 2" bore sizes available from stock. Non-corrosive throughout. Heavy wall tube (1/8" thick brass, pump cylinder finish]. Polished and ground stainless steel piston rods. Threaded rods standard. Aircraft type "O" ring seals (Buna "N" standard compound). 0-150... [See More]
- Mounting: Threaded
- Operating Pressure: 0.0 to 150
- Stroke: 0.0625 to ?
- Bore Size: 1
from Reid Supply
Pneumatic Cylindrical Hold Down Clamps provide activating force for over-center toggle clamps, applying pressure from the top. These cylinders are built to perform repetitive production operations with a magnetic ring for sensing capability. . Stud Mount Pneumatic Cylinder [See More]
- Mounting: Threaded; Stud Mount
- Operating Pressure: 250
- Stroke: 0.5000
- Bore Size: 0.5000
from ASCO
The quad ring rod seal and teflon wiper design provides proper sealing and long life. Tube end seals are compression type and reusable. The high strength profile design aluminum tube is hard coat anodized on the inner diameter. This provides a smooth corrosion free sealing surface and excellent... [See More]
- Mounting: Threaded
- Rated Load/Force: 149
- Stroke: 0.0 to 10
- Operating Pressure: 150
from Cylinders & Valves, Inc.
SPECIAL FEATURES. 1/2", 3/4", 1-1/8", 1-1/2" and 2" bore sizes available from stock. Non-corrosive throughout. Heavy wall tube (1/8" thick brass, pump cylinder finish]. Polished and ground stainless steel piston rods. Threaded rods standard. Aircraft type "O" ring seals (Buna "N" standard compound). [See More]
- Mounting: Threaded
- Operating Pressure: 0.0 to 150
- Stroke: 0.0625 to ?
- Bore Size: 0.5000
from Reid Supply
Pneumatic Cylindrical Hold Down Clamps provide activating force for over-center toggle clamps, applying pressure from the top. These cylinders are built to perform repetitive production operations with a magnetic ring for sensing capability. . Stud Mount Pneumatic Cylinder [See More]
- Mounting: Threaded; Stud Mount
- Operating Pressure: 250
- Stroke: 1
- Bore Size: 1.5
from Cylinders & Valves, Inc.
SPECIAL FEATURES. 1", 1-1/8", 1-1/2" and 2" bore sizes available from stock. Non-corrosive throughout. Heavy wall tube (1/8" thick brass, pump cylinder finish]. Polished and ground stainless steel piston rods. Threaded rods standard. Aircraft type "O" ring seals (Buna "N" standard compound). 0-150... [See More]
- Mounting: Threaded
- Operating Pressure: 0.0 to 150
- Stroke: 0.0625 to ?
- Bore Size: 0.5000
from Reid Supply
Pneumatic Cylindrical Hold Down Clamps provide activating force for over-center toggle clamps, applying pressure from the top. These cylinders are built to perform repetitive production operations with a magnetic ring for sensing capability. . Stud Mount Pneumatic Cylinder [See More]
- Mounting: Threaded; Stud Mount
- Operating Pressure: 250
- Stroke: 1
- Bore Size: 1.5
from Reid Supply
Pneumatic Cylindrical Hold Down Clamps provide activating force for over-center toggle clamps, applying pressure from the top. These cylinders are built to perform repetitive production operations with a magnetic ring for sensing capability. . Stud Mount Pneumatic Cylinder [See More]
- Mounting: Threaded; Stud Mount
- Operating Pressure: 250
- Stroke: 1
- Bore Size: 0.5000
from Reid Supply
Pneumatic Cylindrical Hold Down Clamps provide activating force for over-center toggle clamps, applying pressure from the top. These cylinders are built to perform repetitive production operations with a magnetic ring for sensing capability. . Stud Mount Pneumatic Cylinder [See More]
- Mounting: Threaded; Stud Mount
- Operating Pressure: 250
- Stroke: 2
- Bore Size: 1.75
from Reid Supply
Pneumatic Cylindrical Hold Down Clamps provide activating force for over-center toggle clamps, applying pressure from the top. These cylinders are built to perform repetitive production operations with a magnetic ring for sensing capability. . Stud Mount Pneumatic Cylinder [See More]
- Mounting: Threaded; Stud Mount
- Operating Pressure: 250
- Stroke: 2
- Bore Size: 2
from Reid Supply
Pneumatic Cylindrical Hold Down Clamps provide activating force for over-center toggle clamps, applying pressure from the top. These cylinders are built to perform repetitive production operations with a magnetic ring for sensing capability. . Stud Mount Pneumatic Cylinder [See More]
- Mounting: Threaded; Universal Mount
- Operating Pressure: 250
- Stroke: 1
- Bore Size: 2
from Reid Supply
Pneumatic Cylindrical Hold Down Clamps provide activating force for over-center toggle clamps, applying pressure from the top. These cylinders are built to perform repetitive production operations with a magnetic ring for sensing capability. . Stud Mount Pneumatic Cylinder [See More]
- Mounting: Threaded; Universal Mount
- Operating Pressure: 250
- Stroke: 1
- Bore Size: 0.5000
from Reid Supply
Pneumatic Cylindrical Hold Down Clamps provide activating force for over-center toggle clamps, applying pressure from the top. These cylinders are built to perform repetitive production operations with a magnetic ring for sensing capability. . Stud Mount Pneumatic Cylinder [See More]
- Mounting: Threaded; Stud Mount
- Operating Pressure: 250
- Stroke: 0.5000
- Bore Size: 0.6250
from Reid Supply
Pneumatic Cylindrical Hold Down Clamps provide activating force for over-center toggle clamps, applying pressure from the top. These cylinders are built to perform repetitive production operations with a magnetic ring for sensing capability. . Double End Pneumatic Cylinder [See More]
- Mounting: Nose Mount; Threaded; Front Nose
- Operating Pressure: 250
- Stroke: 1
- Bore Size: 0.7500
from Reid Supply
Pneumatic Cylindrical Hold Down Clamps provide activating force for over-center toggle clamps, applying pressure from the top. These cylinders are built to perform repetitive production operations with a magnetic ring for sensing capability. . Double End Pneumatic Cylinder [See More]
- Mounting: Nose Mount; Threaded; Front Nose
- Operating Pressure: 250
- Stroke: 2
- Bore Size: 0.8750
from Reid Supply
Pneumatic Cylindrical Hold Down Clamps provide activating force for over-center toggle clamps, applying pressure from the top. These cylinders are built to perform repetitive production operations with a magnetic ring for sensing capability. . Double End Pneumatic Cylinder [See More]
- Mounting: Threaded; Rear Pivot
- Operating Pressure: 250
- Stroke: 1
- Bore Size: 0.8750
from Reid Supply
Pneumatic Cylindrical Hold Down Clamps provide activating force for over-center toggle clamps, applying pressure from the top. These cylinders are built to perform repetitive production operations with a magnetic ring for sensing capability. . Double End Pneumatic Cylinder [See More]
- Mounting: Threaded; Rear Pivot
- Operating Pressure: 250
- Stroke: 2
- Bore Size: 1.5