Mica Insulation Electric Heaters
from Backer Hotwatt Inc.
Features. The Hotwatt Immersion Heater may be supplied with various junction boxes for additional terminal or lead protection. For corrosive environments, units can be supplied in other special alloys best suited to the operating conditions. The lead end of the unit may be sealed for extreme... [See More]
- Insulation Options: Ceramic; Magnesium Oxide Insulation; Mica
- Heating Capacity: 0.12 to 21.00
- Heater Type: Immersion Heater; Cartridge Heater
- Phase: Single Phase AC Voltage; Three Phase AC Voltage (optional feature)
from Tempco Electric Heater Corporation
We are at the forefront of the industry, addressing the challenges of stringent operating parameters and high quality requirements faced by original equipment manufacturers specializing in the semiconductor, wave solder and reflow surface mount processes. By employing state-of-the-art technologies... [See More]
- Insulation Options: Ceramic; Mica
- Sleeve (Sheath) Material: Aluminum; Brass; Bronze
- Heater Type: Water Heaters; Cast-In Heater
from WATTCO
Tanks requiring industrial tank heaters can utilize indirect heating with band heaters or, they can use direct heating that typically uses some form of immersion heating. Indirect Heating. WATTCO Band heaters can be found in several types of dimension, wattage, voltages and material. Mica band... [See More]
- Insulation Options: Ceramic; Mica
- Watt Density: 45
- Heater Type: Band Heater
- Applications: Molding, Extrusion, Container/tank/pipe Heating, Pharmaceutical/Food Industry
from Backer Hotwatt Inc.
Features. Hotwatt Precision Cartridge Heaters provide localized heat to restricted work areas requiring close thermal control. Dies, Platens, and a variety of other types of processing equipment are efficiently heated. Closely controlled work temperatures up to 1250F are obtained by a combination of... [See More]
- Insulation Options: Ceramic; Magnesium Oxide Insulation; Mica
- Maximum Operating (Sheath) Temperature: 1250
- Heater Type: Cartridge Heater
- Heating Capacity: 0.01 to 15.50
from WATTCO
Finned strip heaters, often considered component heaters, are an electric heating element that maximizes heat intensity and transfer effectively in an area. Steel fin strip heaters are an excellent industrial heating product that can be easily controlled by using a heating control panel, mechanical... [See More]
- Insulation Options: Magnesium Oxide Insulation; Mica; Fiberglass
- Maximum Operating (Sheath) Temperature: 1200
- Heater Type: Strip
- Heating Capacity: 0.10 to 4.15
from Backer Hotwatt Inc.
Features. The Hotwatt Square and Rectangular Cartridge Heater is designed to distribute maximum heat within a desired area. Because they are completely enclosed, square units will furnish more usable heat for a given wattage than a comparable strip heater attached to the exterior of a mod, platen,... [See More]
- Insulation Options: Ceramic; Magnesium Oxide Insulation; Mica; Fiberglass
- Maximum Operating (Sheath) Temperature: 1200
- Heater Type: Cartridge Heater
- Heating Capacity: 0.01 to 2.40
from WATTCO
Strip heaters, often known as component heaters, are a simple way of using surface area to transfer heat effectively. Steel strip heaters are an excellent industrial heating product and can be easily controlled by using a temperature controller such as a mechanical thermostat or a cost effective... [See More]
- Insulation Options: Magnesium Oxide Insulation; Mica; Fiberglass
- Maximum Operating (Sheath) Temperature: 1200
- Heater Type: Strip
- Heating Capacity: 0.10 to 4.15
from Backer Hotwatt Inc.
Applications. Dies, cylinders, kettles, molds, process machines, platens, tanks, or other applications where controlled heating is needed. Features. Strip heaters may be used single or in groups to provide the required amount of heat. For maximum distribution, it is recommended that the strip... [See More]
- Insulation Options: Mica
- Maximum Operating (Sheath) Temperature: 900
- Heater Type: Strip
- Heating Capacity: 0.10 to 2.70
from Backer Hotwatt Inc.
Features. The Backer Hotwatt Standard Band Heaters are manufactured in one or two piece constructions with maximum inside diameters ranging from 11-1/2" to 22-1/2", respectively. Three or more sections are employed when heaters of larger diameters are needed (as for blown film extrusion dies). Holes... [See More]
- Insulation Options: Mica
- Maximum Operating (Sheath) Temperature: 900
- Heater Type: Band Heater
- Heating Capacity: 0.04 to 0.90
from Backer Hotwatt Inc.
Features. The Backer Hotwatt Standard Band Heaters are manufactured in one or two piece constructions with maximum inside diameters of 11 1/2" and 22 1/2" respectively. Three or more sections are employed when heaters of larger diameters are needed (as for blown film extrusion dies). Holes and... [See More]
- Insulation Options: Mica
- Maximum Operating (Sheath) Temperature: 900
- Heater Type: Band Heater
- Heating Capacity: 0.55 to 1.65
from OMEGA Engineering, Inc.
Efficient Heat Transfer is provided by high quality nickel chromium resistor wire wound on a select mica strip and enclosed in a die-formed aluminum coated steel sheath. Long-Term Durability is assured by non-hygroscopic mica insulation. Uniform Fit to ±1/16". Type A Extra Flexible Stranded... [See More]
- Insulation Options: Mica
- Maximum Operating (Sheath) Temperature: 900
- Heater Type: Band Heater
- Heating Capacity: 0.10 to 1.00
from Leister USA
Weighing just seven pounds with its detachable handle, HOTWIND can be used both as an integrated or bench-top device. This enormous flexibility combined with the high maximum temperature of up to 800 °C and the wide range of accessories means that the HOTWIND can be used in a variety of... [See More]
- Insulation Options: Ceramic; Mica
- Maximum Operating (Sheath) Temperature: 1202
- Heater Type: ForcedAir; Air Heater
- Max Air Temperature: 1202
from Chromalox
1 - 6-1/8" Nozzle Dia. 100 - 300 Watts (MB-1). 120 and 240 Volt. Up to 800 °F Max. Sheath Temp. Up to 600 °F Max. Barrel Temp. Heavy Duty Anti-torque Post Terminal (type P). Type A Leads [See More]
- Insulation Options: Mica
- Maximum Operating (Sheath) Temperature: 800
- Heater Type: Band Heater
- Heating Capacity: 0.10 to 0.30
from OMEGA Engineering, Inc.
FEATURES. Efficient Heat Transfer is provided by high quality nickel chromium resistor wire wound on a selected mica strip and enclosed in a die-formed aluminum coated steel sheath. Long-Term Durability is assured by non-hygroscopic mica insulation. Uniform Fit to ± 1/16" because of low... [See More]
- Insulation Options: Mica
- Maximum Operating (Sheath) Temperature: 900
- Heater Type: Band Heater
- Heating Capacity: 0.50 to 2.00
from Leister USA
Features a thermoswitch for device protection, ability to control temperatures via Leister's KSR digital temperature controller, and integrated heating element protection [See More]
- Insulation Options: Ceramic; Mica
- Maximum Operating (Sheath) Temperature: 1202
- Heater Type: ForcedAir; Air Heater
- Phase: Three Phase AC Voltage
from Chromalox
3-1/2" - 10-1/2" Barrel Dia. 500 - 2,000 Watts. 240 - 480 Volt. 21 - 40 W/In ². Up to 800 °F Max. Sheath Temp. Up to 650 °F Max Barrel Temp. Heavy Duty Anti-torque Post Terminals (type P) [See More]
- Insulation Options: Mica
- Maximum Operating (Sheath) Temperature: 800
- Heater Type: Band Heater
- Heating Capacity: 0.50 to 2.00
from OMEGA Engineering, Inc.
Omegalux ® MBH series mica insulated band heaters are available in one or two piece construction and a variety of diameters and widths. One piece band heaters are manufactured with inside diameters from 1 to 31/2 inches. Two piece band heaters are available in diameters from 4 to 111/2 inches. [See More]
- Insulation Options: Mica
- Maximum Operating (Sheath) Temperature: 900
- Heater Type: Band Heater
- Heating Capacity: 0.09 to 1.65
from Leister USA
Integrates into existing, or newly designed, air systems, suitable for recycling air applications, no integrated power electronics [See More]
- Insulation Options: Ceramic; Mica
- Maximum Operating (Sheath) Temperature: 1202
- Heater Type: ForcedAir; Air Heater; Duct Heater
- Max Air Temperature: 1292
from Leister USA
Suitable for temperatures up to 1650 F and can be controlled via a three phase controller and regulated with a digital controller [See More]
- Insulation Options: Ceramic; Mica
- Maximum Operating (Sheath) Temperature: 1652
- Heater Type: ForcedAir; Air Heater
- Max Air Temperature: 1292
from Leister USA
Features a thermoswitch for device protection, ability to adjust heating power with a potentiometer, and integrated heating element protection [See More]
- Insulation Options: Ceramic; Mica
- Maximum Operating (Sheath) Temperature: 1202
- Heater Type: ForcedAir; Air Heater
- Phase: Single Phase AC Voltage
from Leister USA
Features a thermoswitch for device protection, ability to adjust heating power with a potentiometer, and integrated heating element protection [See More]
- Insulation Options: Ceramic; Mica
- Maximum Operating (Sheath) Temperature: 1202
- Heater Type: ForcedAir; Air Heater
- Phase: Three Phase AC Voltage
from Leister USA
With up to 39 kW our most powerful device. It is deployed where a large air flow is required at a high temperature.The air heater 40 000 is available in diverse versions, with or without power electronics. The optional KSR DIGITALregulator allows the air temperature to be regulated. [See More]
- Insulation Options: Ceramic; Mica
- Maximum Operating (Sheath) Temperature: 1202
- Heater Type: ForcedAir; Air Heater
- Max Air Temperature: 1292
from Leister USA
Features a thermoswitch for device protection [See More]
- Insulation Options: Ceramic; Mica
- Maximum Operating (Sheath) Temperature: 1292
- Heater Type: ForcedAir; Air Heater
- Phase: Three Phase AC Voltage
from Leister USA
Integrates into existing, or newly designed, air systems, suitable for recycling air applications, no integrated power electronics [See More]
- Insulation Options: Ceramic; Mica
- Maximum Operating (Sheath) Temperature: 1292
- Heater Type: ForcedAir; Air Heater; Duct Heater
- Max Air Temperature: 1292
from Leister USA
Features a thermoswitch for device protection, ability to control temperatures via Leister's KSR digital temperature controller, and integrated heating element protection [See More]
- Insulation Options: Ceramic; Mica
- Maximum Operating (Sheath) Temperature: 1112
- Heater Type: ForcedAir; Air Heater
- Max Air Temperature: 1112
from Leister USA
Features thermoswitch for device protection and pressure reduction valve [See More]
- Insulation Options: Ceramic; Mica
- Maximum Operating (Sheath) Temperature: 1112
- Heater Type: ForcedAir; Air Heater
- Max Air Temperature: 1382
from Leister USA
used for permanent full heat capacity or for installation of an individual, external power control. Passive overheat protection [See More]
- Insulation Options: Ceramic; Mica
- Maximum Operating (Sheath) Temperature: 1202
- Heater Type: ForcedAir; Air Heater
- Max Air Temperature: 1202
from Leister USA
used for permanent full heat capacity or for installation of an individual, external power control. Passive overheat protection [See More]
- Insulation Options: Ceramic; Mica
- Maximum Operating (Sheath) Temperature: 1202
- Heater Type: ForcedAir; Air Heater
- Max Air Temperature: 1202
from Leister USA
The medium size LHS 41 series air heaters cover an extremely wide application range. The small footprint enables easy integration in machines. The heater tube diameter of 50 mm allows passing sufficient air flow, also for high performance applications. [See More]
- Insulation Options: Ceramic; Mica
- Maximum Operating (Sheath) Temperature: 1112
- Heater Type: ForcedAir; Air Heater
- Max Air Temperature: 1112
from Leister USA
The LHS 61 series is your choice for high performance applications. The outlet diameter of 62 mm for LHS 61S versions and 92 mm for LHS 61L versions allow high air flows with up to 16 kW heating power. [See More]
- Insulation Options: Ceramic; Mica
- Maximum Operating (Sheath) Temperature: 1112
- Heater Type: ForcedAir; Air Heater
- Max Air Temperature: 1112
from Leister USA
Leister's most powerful device. With 32 kW, the LHS 91 BASIC and SYSTEM are the perfect tools for even the most demanding of heating applications. The LHS 91 is capable of replacing many gas-fired heaters. [See More]
- Insulation Options: Ceramic; Mica
- Maximum Operating (Sheath) Temperature: 0.0 to 1202
- Heater Type: ForcedAir; Air Heater
- Max Air Temperature: ? to 1202
from Leister USA
mini hot air heater and blower in one unit. Great for tight spaces, hand held applications, or assembly lines that run for several hours a day. Features a brushless, maintenance free, motor and is excellent for use in harsh environments as well [See More]
- Insulation Options: Ceramic; Mica
- Maximum Operating (Sheath) Temperature: 1202
- Heater Type: ForcedAir; Air Heater
- Maximum Air Flow: ? to 12.3
from Leister USA
The demand for controllable and adjustable industrial hot air systems is constantly growing. That is why we have equipped our MISTRAL System with control and adjustment technology. With the MISTRAL System the heating performance can precisely be controlled via the normal industry standard control... [See More]
- Insulation Options: Ceramic; Mica
- Maximum Operating (Sheath) Temperature: 1202
- Heater Type: ForcedAir; Air Heater
- Max Air Temperature: 1202
from Leister USA
hot air heater and blower in one unit. Compact and very robust with excellent air flow characteristics. Features a brushles, maintenance free, motor. [See More]
- Insulation Options: Ceramic; Mica
- Maximum Operating (Sheath) Temperature: 1202
- Heater Type: ForcedAir; Air Heater
- Maximum Air Flow: ? to 60
from Leister USA
The muscle man among the hot air blowers leaves no doubts about its performance. It is compactly built and easy to integrate into industrial processes. Just as Leister ’s smaller hot air blowers VULCAN SYSTEM can be remote controlled through a standard analog interface. [See More]
- Insulation Options: Ceramic; Mica
- Maximum Operating (Sheath) Temperature: 1202
- Heater Type: ForcedAir; Air Heater
- Max Air Temperature: 1202