Strip Heater Electric Heaters
from WATTCO
Finned strip heaters, often considered component heaters, are an electric heating element that maximizes heat intensity and transfer effectively in an area. Steel fin strip heaters are an excellent industrial heating product that can be easily controlled by using a heating control panel, mechanical... [See More]
- Heater Type: Strip
- Heating Capacity: 0.10 to 4.15
- Maximum Operating (Sheath) Temperature: 1200
- Phase: Single Phase AC Voltage; Three Phase AC Voltage
from Backer Hotwatt Inc.
Applications: Air Heating, Air Ovens, Load Banks. Features: The Hotwatt Stainless Steel Strip Heater provides clean, dependable heat with sheath temperatures up to 1200 ºF (649 ºC) and watt densities up to 40 watts per square inch. Because of the seamless stainless steel sheath, Hotwatt... [See More]
- Heater Type: Strip
- Heating Capacity: 0.07 to 4.32
- Maximum Operating (Sheath) Temperature: 1200
- Phase: Single Phase AC Voltage
from Backer Marathon, Inc.
Backer Marathon ceramic strip heaters offer high temperature performance in a rugged, contamination resistant stainless steel sheath. They are bolt-in replacements for Chromalox, GE, Watlow, and other channel strip heaters. They are available with a stainless steel sheath (for temperatures up to... [See More]
- Heater Type: Strip
- AC Voltage Required: 120
- Heating Capacity: 0.15
- Sleeve (Sheath) Material: Stainless Steel
from Tempco Electric Heater Corporation
Type 304 Stainless Steel sheath provides physical strength and resistance to high temperatures of up to 1200 °F (650 °C) and chemical corrosion. Helically wound resistance wire coil made from nickel-chrome wire is evenly stretched and precisely strung through the ceramic insulator, providing... [See More]
- Heater Type: Strip
- Heating Capacity: 0.12 to 1.60
- Maximum Operating (Sheath) Temperature: 1200
- AC Voltage Required: 120 to 240
from RS Components, Ltd.
Cable,heating tape,20m 15W/m 12A [See More]
- Heater Type: Strip
- AC Voltage Required: 240
- Max Air Temperature: -76 to 392
- Sleeve (Sheath) Material: Silicone Rubber
from WATTCO
Strip heaters, often known as component heaters, are a simple way of using surface area to transfer heat effectively. Steel strip heaters are an excellent industrial heating product and can be easily controlled by using a temperature controller such as a mechanical thermostat or a cost effective... [See More]
- Heater Type: Strip
- Heating Capacity: 0.10 to 4.15
- Maximum Operating (Sheath) Temperature: 1200
- Phase: Single Phase AC Voltage; Three Phase AC Voltage
from Backer Hotwatt Inc.
Applications: Dies, Molds, Plastic Forming and Sealing. Tank and Kettle Heating. Features: The Hotwatt Stainless Steel Strip Heater provides clean, dependable heat with sheath temperatures up to 1200 ºF (649 ºC) and watt densities up to 40 watts per square inch. Because of the seamless... [See More]
- Heater Type: Strip
- Heating Capacity: 0.04 to 4.32
- Maximum Operating (Sheath) Temperature: 1200
- Phase: Single Phase AC Voltage
from Tempco Electric Heater Corporation
Type 304 Stainless Steel sheath provides physical strength and resistance to high temperatures of up to 1200 °F (650 °C) and chemical corrosion. Helically wound resistance wire coil made from nickel-chrome wire is evenly stretched and precisely strung through the ceramic insulator, providing... [See More]
- Heater Type: Strip
- Heating Capacity: 0.25 to 4.15
- Maximum Operating (Sheath) Temperature: 1200
- AC Voltage Required: 480
from RS Components, Ltd.
Raychem(R) hot water maintenance kit [See More]
- Heater Type: Strip
- AC Voltage Required: 230
- Max Air Temperature: 149
from Backer Hotwatt Inc.
Applications. Dies, cylinders, kettles, molds, process machines, platens, tanks, or other applications where controlled heating is needed. Features. Strip heaters may be used single or in groups to provide the required amount of heat. For maximum distribution, it is recommended that the strip... [See More]
- Heater Type: Strip
- Heating Capacity: 0.10 to 2.70
- Maximum Operating (Sheath) Temperature: 900
- Phase: Single Phase AC Voltage
from Tempco Electric Heater Corporation
Ruggedly constructed .315 diameter heating elements are the heat source for Maxistrip heaters, providing excellent life. Specially designed aluminum track houses the tubular heating element, providing an excellent heat sink for rapid heat transfer and good temperature uniformity. The surface contact... [See More]
- Heater Type: Strip
- Heating Capacity: 0.13 to 1.08
- Maximum Operating (Sheath) Temperature: 650
- AC Voltage Required: 120 to 240
from RS Components, Ltd.
FroStop(R) Blk 18W/m thermal control kit [See More]
- Heater Type: Strip
- AC Voltage Required: 230
- Max Air Temperature: 149
from Tempco Electric Heater Corporation
Specially treated rust-resistant steel sheath casing provides physical strength, high emissivity and good thermal conductivity for sheath temperatures up to 900 °F (480 °C). For corrosive atmospheres and/or sheath temperatures up to 1200 °F (650 °C), stainless steel sheath is... [See More]
- Heater Type: Strip
- Heating Capacity: 0.75 to 1.75
- Maximum Operating (Sheath) Temperature: 900 to 1200
- AC Voltage Required: 120 to 240
from RS Components, Ltd.
Anti-condensation heating tape,3m [See More]
- Heater Type: Strip
- AC Voltage Required: 240
- Max Air Temperature: -94 to 392
- Sleeve (Sheath) Material: Silicone Rubber
from RS Components, Ltd.
Anti-condensation heating tape,6m [See More]
- Heater Type: Strip
- AC Voltage Required: 240
- Max Air Temperature: -94 to 392
- Sleeve (Sheath) Material: Silicone Rubber
from RS Components, Ltd.
Parallel circuit heating tape,20m 20w/m [See More]
- Heater Type: Strip
- AC Voltage Required: 240
- Max Air Temperature: -76 to 392
- Sleeve (Sheath) Material: Silicone Rubber
from RS Components, Ltd.
Parallel circuit heating tape,20m 40w/m [See More]
- Heater Type: Strip
- AC Voltage Required: 240
- Max Air Temperature: -76 to 392
- Sleeve (Sheath) Material: Silicone Rubber
from RS Components, Ltd.
BTV hazardous area heating cable [See More]
- Heater Type: Strip
- AC Voltage Required: 230
- Max Air Temperature: -76 to 149
- Sleeve (Sheath) Material: Fluoropolymer
from RS Components, Ltd.
XTV hazardous area heating cable [See More]
- Heater Type: Strip
- AC Voltage Required: 230
- Max Air Temperature: 250
- Sleeve (Sheath) Material: Fluoropolymer
from RS Components, Ltd.
Cable, heating tape 15W/m 12A - 100m [See More]
- Heater Type: Strip
- AC Voltage Required: 240
- Max Air Temperature: -76 to 392
- Sleeve (Sheath) Material: Silicone Rubber
from RS Components, Ltd.
Cable, heating tape 15W/m 12A - 50m [See More]
- Heater Type: Strip
- AC Voltage Required: 240
- Max Air Temperature: -76 to 392
- Sleeve (Sheath) Material: Silicone Rubber
from Thermal Circuits, Inc.
Flexible Heaters from Thermal Circuits are light, bendable and can conform to irregular shapes, contours and 3-dimensional patterns. They are simple to apply, yet are capable of higher output than traditional metal-clad heaters.High-Temperature Mica Heaters. 600 Degrees Celsius (1112 º F)... [See More]
- Heater Type: Flexible Heater; Radiant Heater; Radiant Flat Panel Heater; Radiant Reflective Process Heater; Strip; Air Heater; Ceramic Fiber Heater
- Insulation Options: Ceramic
- Maximum Operating (Sheath) Temperature: 1112
from Vulcan Electric Co.
Finned Strip Heaters are manufactured with the same one-piece welded construction as our standard Strip Heaters except that heat-dissipating fins are added to the outer sheath. The fins are specially designed and mechanically attached to provide efficient heating in many air or gas process heating... [See More]
- Heater Type: Strip
- Sleeve (Sheath) Material: Stainless Steel
- Maximum Operating (Sheath) Temperature: ? to 1200
from OMEGA Engineering, Inc.
•. Excellent for Use in Air Heating, Air Ovens, and Load Banks. •. Seamless Stainless Steel Sheath. •. Post Terminals. •. Ceramic Element Support. •. Magnesium Oxide Packing [See More]
- Heater Type: Strip
- Phase: Single Phase AC Voltage
- Maximum Operating (Sheath) Temperature: 800
- AC Voltage Required: 120 to 240
from DBK USA, Inc.
High-quality compact heating element in round shape with central mounting hole. The concave pre-stressed contact surface ensures form-fit contact and thus optimum heat transfer. Equipped with flat terminals for electrical connection. Type HS05 is a special version of the HT series and comes with... [See More]
- Heater Type: Strip; Specialty Industrial Heaters; Surface Spot Heater
- Heating Capacity: 0.15 to 0.20
- Maximum Operating (Sheath) Temperature: 266 to 572
- AC Voltage Required: 110 to 600
from Chromalox
Two Terminals, One End. 8 - 53-7/8" Lengths. 250 - 1,500 Watts. 120 and 240 Volt. 7 - 24 W/In ². Third-party certifications: UL Recognized, CSA, CE, VDE [See More]
- Heater Type: Strip
- AC Voltage Required: 120 to 240
- Heating Capacity: 0.25 to 1.50
- Watt Density: 7 to 24
from Benchmark Thermal Corp.
Flexible Heaters. Flexible heaters can supply heat to a wide variety of applications. They can be custom designed to accommodate contours, holes, and geometric shapes, and will deliver uniform temperature. These heaters are ideal for large and small contact areas requiring controlled and even... [See More]
- Heater Type: Flexible Heater; Strip
- Heating Capacity: 0.01 to 0.12
- Maximum Operating (Sheath) Temperature: 475
- AC Voltage Required: 115
from Acrolab Ltd.
A Ceramic Strip Heater provides the ability to withstand higher temperatures (typically limited to 40 to 45 watts per square inch, depending on the application). The heater consists of a stainless steel sheath containing a high-temperature ceramic insulating a nickel chrome wire coil. Warranty... [See More]
- Heater Type: Strip
- AC Voltage Required: 480
from Thermal Circuits, Inc.
Silicone Rubber is the most versatile rubber based dielectric used to produce flexible surface heaters. Both etched foil and wire wound element designs are offered. The application determines the choice. Fiberglass reinforced Silicone Rubber Heaters are thin and flexible, durable and have a long... [See More]
- Heater Type: Flexible Heater; Radiant Heater; Radiant Flat Panel Heater; Radiant Reflective Process Heater; Strip; Air Heater
- Sleeve (Sheath) Material: SynRubber; EPDM
- Maximum Operating (Sheath) Temperature: 347
from Vulcan Electric Co.
Strip Heaters offer a rugged one-piece welded construction available in stainless steel. These Strip Heaters are an excellent choice for surface contact heating where even heat over broad surface area is desired. Lengths are available up to 10 feet. Construction is Underwriters Labs Recognized, and... [See More]
- Heater Type: Strip
- Sleeve (Sheath) Material: Stainless Steel
- Maximum Operating (Sheath) Temperature: ? to 1200
from OMEGA Engineering, Inc.
FEATURES. The HCS Series stainless steel strip heaters provide clean, dependable heat with sheath temperatures up to 649 °C (1200 °F) and watt densities up to 40 W per square inch. Because of the seamless stainless steel sheath, these ceramic-insulated strip heaters are dimensionally stable... [See More]
- Heater Type: Strip
- Phase: Single Phase AC Voltage
- Maximum Operating (Sheath) Temperature: 1200
- AC Voltage Required: 120 to 240
from DBK USA, Inc.
The HP Series features a compact design and high power density. The flat aluminium housing can be easily installed and ensures optimum heat transfer. The ready-to-use heating element can be fixed in any place by corresponding fixing holes on the profiles (e.g. drilled or punched mounting holes). [See More]
- Heater Type: Strip; Specialty Industrial Heaters; Surface Spot Heater
- Heating Capacity: 0.06 to 0.20
- Maximum Operating (Sheath) Temperature: 464
- AC Voltage Required: 110 to 600
from Chromalox
3 Terminals, Centered. 10-1/2 - 23-3/4" Lengths. 400 - 3,000 Watts. 120 and 240 Volt. 10 - 20 W/In ². Third-party certifications: UL Recognized, CSA, CE, VDE [See More]
- Heater Type: Strip
- AC Voltage Required: 120 to 240
- Heating Capacity: 0.40 to 3.00
- Watt Density: 10 to 20
from Acrolab Ltd.
Acrolab mica insulated strip heaters are economical heat sources, suitable for providing heat to flat surfaces. The sheath temperature limitation is 900 ° F. These heaters can be made to include pressure plates that improve uniformity and heat transfer. Mica insulated heaters are available in... [See More]
- Heater Type: Strip
- Sleeve (Sheath) Material: Stainless Steel
- AC Voltage Required: 120 to 480
- Applications: OEM / Custom
from Thermal Circuits, Inc.
Flexible Heaters from Thermal Circuits are light, bendable and can conform to irregular shapes, contours and 3-dimensional patterns. They are simple to apply, yet are capable of higher output than traditional metal-clad heaters.High-Temperature Mica Heaters. 500 Degrees Celsius (932 °F) Maximum. [See More]
- Heater Type: Flexible Heater; Radiant Heater; Radiant Flat Panel Heater; Radiant Reflective Process Heater; Strip; Air Heater
- Sleeve (Sheath) Material: Fiberglass Cloth
- Maximum Operating (Sheath) Temperature: 932
from OMEGA Engineering, Inc.
bull;. Rugged, Reliable Premium Quality. •. 250 to 4150 Watts. •. 120, 240 Volt Single Phase. •. 3.8 cm (1 1/2") Strip with 5 cm (2") Wide Fins. •. Maximum Work Temperatures from 107 to 295 °C (225 to 565 °F). •. Available with Rust- Resistant Iron or Chrome-Steel... [See More]
- Heater Type: Strip
- Heating Capacity: 0.25 to 4.15
- Maximum Operating (Sheath) Temperature: 750
- Phase: Single Phase AC Voltage
from Chromalox
One Terminal, Each End. 8 - 71-7/8" Lengths. 150 - 3,000 Watts. 120 and 240 Volt. 6 - 21 W/In ². Third-party certifications: UL Recognized, CSA, CE, VDE [See More]
- Heater Type: Strip
- AC Voltage Required: 120 to 240
- Heating Capacity: 0.15 to 3.00
- Watt Density: 6 to 21
from Acrolab Ltd.
Mineral Strips are designed to provide longer life at higher watt densities and operating temperatures than the standard Mica Strip Heater. Its ceramic insulation provides for minimal air gaps and superior heat transfer efficiency. Mineral strips can withstand sheath temperatures of up to 1400 °... [See More]
- Heater Type: Strip
- Sleeve (Sheath) Material: Stainless Steel
- AC Voltage Required: 120 to 480
- Insulation Options: Mineral
from Thermal Circuits, Inc.
Flexible Heaters from Thermal Circuits are light, bendable and can conform to irregular shapes, contours and 3-dimensional patterns. They are simple to apply, yet are capable of higher output than traditional metal-clad heaters.High-Temperature Mica Heaters. 600 Degrees Celsius (1112 º F)... [See More]
- Heater Type: Flexible Heater; Radiant Heater; Radiant Flat Panel Heater; Radiant Reflective Process Heater; Strip; Air Heater
- Sleeve (Sheath) Material: Mica
- Maximum Operating (Sheath) Temperature: 1112
from OMEGA Engineering, Inc.
The NSA series high temperature strip heater features a slim ½" (1.27 cm) width design, ideal for heat applications where space is restricted. The maximum temperature rating is 1500 °F with Incoloy sheath material. Applications include heating of large tanks, vats and heating ducts while... [See More]
- Heater Type: Strip
- Heating Capacity: 0.12 to 0.40
- Maximum Operating (Sheath) Temperature: 1500
- Phase: Single Phase AC Voltage
from Chromalox
Two Terminals, One End. 8 - 71-7/8" Lengths. 150 - 3,000 Watts. 120 and 240 Volt. 6 - 21 W/In ². Third-party certifications: UL Recognized, CSA, CE, VDE [See More]
- Heater Type: Strip
- AC Voltage Required: 120 to 240
- Heating Capacity: 0.15 to 3.00
- Watt Density: 6 to 21
from Thermal Circuits, Inc.
Flexible Heaters from Thermal Circuits are light, bendable and can conform to irregular shapes, contours and 3-dimensional patterns. They are simple to apply, yet are capable of higher output than traditional metal-clad heaters.High-Temperature Mica Heaters. 600 Degrees Celsius (1112 º F)... [See More]
- Heater Type: Flexible Heater; Radiant Heater; Radiant Flat Panel Heater; Radiant Reflective Process Heater; Strip; Air Heater
- Maximum Operating (Sheath) Temperature: 1112
from OMEGA Engineering, Inc.
OMEGALUX ® strip heaters are used principally for convection-type air heating and clamp-on installations. When selecting strip heaters for either, two important factors must be considered: 1. The proper sheath material for resisting any rusting and oxidizing inherent in the process or... [See More]
- Heater Type: Strip
- Heating Capacity: 0.20 to 2.25
- Maximum Operating (Sheath) Temperature: 750
- Phase: Single Phase AC Voltage
from Chromalox
Two Terminals, Centered. 10-1/2" - 23-3/4" Lengths. 350 - 1,000 Watts. 120 and 240 Volt. 12 - 27 W/In ². Third-party certifications: UL Recognized, CSA, VDE, CE [See More]
- Heater Type: Strip
- AC Voltage Required: 120 to 240
- Heating Capacity: 0.12 to 0.24
- Watt Density: 12 to 27
from Thermal Circuits, Inc.
Flexible Heaters from Thermal Circuits are light, bendable and can conform to irregular shapes, contours and 3-dimensional patterns. They are simple to apply, yet are capable of higher output than traditional metal-clad heaters.High-Temperature Mica Heaters. UL & CSA Recognized. 300 Degrees... [See More]
- Heater Type: Flexible Heater; Radiant Heater; Radiant Flat Panel Heater; Radiant Reflective Process Heater; Strip; Air Heater
- Sleeve (Sheath) Material: Polyimide
- Maximum Operating (Sheath) Temperature: 572
from OMEGA Engineering, Inc.
•. 3 /4" (1.9 cm) and 1" (2.54) Wide. •. Rugged, Reliable Premium Quality. •. 100 to 1500 Watts. •. 2 Terminals at One End. •. C.S.A. Certified. •. SN Series- 3 /4" Width SNH Series-1"Width [See More]
- Heater Type: Strip
- Heating Capacity: 0.10 to 1.50
- Maximum Operating (Sheath) Temperature: 1200
- Phase: Single Phase AC Voltage
from Chromalox
8-1/8 -72" Lengths. 200 - 2,550 Watts. 120 and 240 Volt. 10 - 13 W/In ². Optional Mounting Tabs. Rust Resisting One-Piece Iron Sheath. 750 °F Max. Sheath Temp. CSA (SSE Only) [See More]
- Heater Type: Strip
- Heating Capacity: 0.20 to 2.55
- Maximum Operating (Sheath) Temperature: 750
- AC Voltage Required: 120 to 240
from Thermal Circuits, Inc.
Flexible Heaters from Thermal Circuits are light, bendable and can conform to irregular shapes, contours and 3-dimensional patterns. They are simple to apply, yet are capable of higher output than traditional metal-clad heaters.High-Temperature Mica Heaters. UL & CSA Recognized. 105 Degrees... [See More]
- Heater Type: Flexible Heater; Radiant Heater; Radiant Flat Panel Heater; Radiant Reflective Process Heater; Strip; Air Heater
- Sleeve (Sheath) Material: Mylar®
- Maximum Operating (Sheath) Temperature: 221
from OMEGA Engineering, Inc.
Strip-heater advantages for highertemperature applications are offered by NS series. The heater design, materials and construction give long life for given power densities. The Incoloy sheath encloses nickelchromium resistance wire embedded in a densely compacted refractory material selected for... [See More]
- Heater Type: Strip
- Heating Capacity: 0.50 to 3.00
- Maximum Operating (Sheath) Temperature: 1200
- Phase: Single Phase AC Voltage
from Chromalox
8-1/8 -72" Lengths. 200 - 2,550 Watts. 120 and 240 Volt. 10 - 13 W/In ². Monel One-Piece Sheath. 900 °F Max. Sheath Temp. CSA (SSE Only) [See More]
- Heater Type: Strip
- Heating Capacity: 0.20 to 2.55
- Maximum Operating (Sheath) Temperature: 900
- AC Voltage Required: 120 to 240
from Thermal Circuits, Inc.
Flexible Heaters from Thermal Circuits are light, bendable and can conform to irregular shapes, contours and 3-dimensional patterns. They are simple to apply, yet are capable of higher output than traditional metal-clad heaters.High-Temperature Mica Heaters. 175 Degrees Celsius (342 º F)... [See More]
- Heater Type: Flexible Heater; Radiant Heater; Radiant Flat Panel Heater; Radiant Reflective Process Heater; Strip; Air Heater
- Sleeve (Sheath) Material: Teflon®
- Maximum Operating (Sheath) Temperature: 342
from OMEGA Engineering, Inc.
Seamless strip elements are supplied without mounting tabs as standard. Overall length (dimension A) is with mounting tab; dimension D is length without mounting tabs [See More]
- Heater Type: Strip
- Heating Capacity: 0.20 to 0.80
- Maximum Operating (Sheath) Temperature: 950
- Phase: Single Phase AC Voltage
from Chromalox
6-1/2 - 25-1/2" Lengths. 400 - 1,500 Watts. 120 and 240 Volt. 8 - 25 W/In ². Third-party certifications: UL Recognized, CSA, CE, VDE [See More]
- Heater Type: Strip
- AC Voltage Required: 120 to 240
- Heating Capacity: 0.40 to 1.50
- Watt Density: 8 to 25
from Thermal Circuits, Inc.
Flexible Heaters from Thermal Circuits are light, bendable and can conform to irregular shapes, contours and 3-dimensional patterns. They are simple to apply, yet are capable of higher output than traditional metal-clad heaters.High-Temperature Mica Heaters. UL & CSA Recognized. 220 Degrees... [See More]
- Heater Type: Flexible Heater; Radiant Heater; Radiant Flat Panel Heater; Radiant Reflective Process Heater; Strip; Air Heater
- Sleeve (Sheath) Material: Nomex®
- Maximum Operating (Sheath) Temperature: 428
from OMEGA Engineering, Inc.
OMEGALUX ® "S" series strip heaters are supplied with either a rust-resisting iron or chrome steel sheath to a width of 1 ½". Selecting the sheath material depends upon the process and environment that the heaters would be exposed to. The "S" series features one terminal on each end... [See More]
- Heater Type: Strip
- Heating Capacity: 0.15 to 2.25
- Maximum Operating (Sheath) Temperature: 1200
- Phase: Single Phase AC Voltage
from Chromalox
9-1/2 - 35-3/4" Lengths. 100 - 600 Watts. 120 and 240 Volt. 7 - 11 W/In ². Third-party certifications: UL Recognized, CSA, CE, VDE [See More]
- Heater Type: Strip
- AC Voltage Required: 120 to 240
- Heating Capacity: 0.10 to 0.60
- Watt Density: 7 to 11
from Thermal Circuits, Inc.
Flexible Heaters from Thermal Circuits are light, bendable and can conform to irregular shapes, contours and 3-dimensional patterns. They are simple to apply, yet are capable of higher output than traditional metal-clad heaters.High-Temperature Mica Heaters. UL & CSA Recognized. 105 Degrees... [See More]
- Heater Type: Flexible Heater; Radiant Heater; Radiant Flat Panel Heater; Radiant Reflective Process Heater; Strip; Air Heater
- Sleeve (Sheath) Material: Polyester
- Maximum Operating (Sheath) Temperature: 221
from OMEGA Engineering, Inc.
The OMEGALUX WS series strip heater features 2 terminals placed at a right angle on one end. A standard width of 2 ½ inches makes them ideal for most strip heater applications. [See More]
- Heater Type: Strip
- Phase: Single Phase AC Voltage
- Heating Capacity: 0.40 to 1.50
- AC Voltage Required: 120 to 240
from Chromalox
8-1/8 - 27-5/8" Lengths (with Optional Tabs). 200 - 800 Watts. 120 and 240 Volt. One-Piece Monel Sheath. 900 °F Max. Sheath Temp. 13 - 19 W/In ². CSA [See More]
- Heater Type: Strip
- Heating Capacity: 0.20 to 0.80
- Maximum Operating (Sheath) Temperature: 900
- AC Voltage Required: 120 to 240
from Thermal Circuits, Inc.
Flexible Heaters from Thermal Circuits are light, bendable and can conform to irregular shapes, contours and 3-dimensional patterns. They are simple to apply, yet are capable of higher output than traditional metal-clad heaters.High-Temperature Mica Heaters. UL & CSA Recognized. 300 Degrees... [See More]
- Heater Type: Flexible Heater; Radiant Heater; Radiant Flat Panel Heater; Radiant Reflective Process Heater; Strip; Air Heater
- Sleeve (Sheath) Material: Polyimide
- Maximum Operating (Sheath) Temperature: 572
from Chromalox
Mighty-Tuff Strip Heaters provide high temperature, extreme watt densities, and quick response in applications where previously, any other type of strip heater could not be considered. The thin but robust design can produce 1200 °F (650 °C) sheath temperatures and long life because of the... [See More]
- Heater Type: Strip
- Heating Capacity: 0.20 to 3.05
- Maximum Operating (Sheath) Temperature: 1200
- Phase: Single Phase AC Voltage