Fluoropolymer Electric Heaters
from Thermon, Inc
High performance HTEK series resistance constant watt heating cables are used where circuit lengths exceed the limitations of parallel resistance heating cables and high maintain temperatures or high temperature exposure is required. Circuit lengths up to 3,658 m (12,000 feet) can be energized from... [See More]
- Sleeve (Sheath) Material: Teflon®
- Maximum Operating (Sheath) Temperature: -60 to 400
- Heater Type: Heating Cables
- Phase: Single Phase AC Voltage
from Tempco Electric Heater Corporation
Typical Applications. Compatible with most plating tank solutions; inert to acids, anodizing and pickling solutions up to 190 °F (88 °C). Replaces more expensive alumina or graphite heaters. T1 thermal fuse protection standard; T2 bi-metal switch optional. Grounded internal metal element for... [See More]
- Sleeve (Sheath) Material: Teflon®
- Maximum Operating (Sheath) Temperature: 190
- Heater Type: Immersion Heater; Over the Side Heater
- Heating Capacity: 0.50 to 6.00
from Thermon, Inc
Long Line Temperature Maintenance or Freeze Protection TEK series resistance constant watt heating cables are used where circuit lengths exceed the limitations of parallel resistance heating cables. Circuit lengths up to 12,000 feet (3,658 m) can be energized from a single power supply point. The... [See More]
- Sleeve (Sheath) Material: Teflon®
- Maximum Operating (Sheath) Temperature: -60 to 215
- Heater Type: Heating Cables
- Phase: Single Phase AC Voltage
from Tempco Electric Heater Corporation
Typical Applications. Compatible with most plating tank solutions; inert to acids, anodizing and pickling solutions up to 190 °F (88 °C). Replaces more expensive alumina or graphite heaters. T1 thermal fuse protection standard; T2 bi-metal switch optional. Grounded internal metal element for... [See More]
- Sleeve (Sheath) Material: Teflon®
- Maximum Operating (Sheath) Temperature: 190
- Heater Type: Immersion Heater; Over the Side Heater
- Heating Capacity: 0.50 to 6.00
from Thermon, Inc
Freeze Protection or Process Temperature Maintenance FP parallel resistance constant watt heating cables are designed to provide freeze protection or process temperature maintenance to piping, tanks and equipment. The parallel resistance configuration allows the cable to be cut to length and... [See More]
- Sleeve (Sheath) Material: Teflon®
- Maximum Operating (Sheath) Temperature: -76 to 150
- Heater Type: Heating Cables
- Phase: Single Phase AC Voltage
from Tempco Electric Heater Corporation
Typical Applications. Compatible with most plating tank solutions; inert to acids, anodizing and pickling solutions up to 190 °F (88 °C). Replaces more expensive alumina or graphite heaters. T1 thermal fuse protection standard; T2 bi-metal switch optional. Grounded internal metal element for... [See More]
- Sleeve (Sheath) Material: Teflon®
- Maximum Operating (Sheath) Temperature: 190
- Heater Type: Immersion Heater; Over the Side Heater
- Heating Capacity: 0.50 to 6.00
from Thermon, Inc
High performance HPT power-limiting heating cables are designed specifically for process temperature maintenance or freeze protection where high maintain temperatures or high temperature exposure is required. A coiled resistor alloy heating element provides the power-limiting feature of HPT. This... [See More]
- Sleeve (Sheath) Material: Teflon®
- Maximum Operating (Sheath) Temperature: -60 to 302
- Heater Type: Heating Cables
- Phase: Single Phase AC Voltage
from Tempco Electric Heater Corporation
Typical Applications. Compatible with most plating tank solutions; inert to acids, anodizing and pickling solutions up to 190 °F (88 °C). Replaces more expensive alumina or graphite heaters. T1 thermal fuse protection standard; T2 bi-metal switch optional. Grounded internal metal element for... [See More]
- Sleeve (Sheath) Material: Teflon®
- Maximum Operating (Sheath) Temperature: 190
- Heater Type: Immersion Heater; Over the Side Heater
- Heating Capacity: 0.50 to 6.00
from Thermon, Inc
HTSX self-regulating trace heaters are designed specifically for process temperature maintenance or freeze protection where high temperature exposure capability is required. HTSX withstands the temperature exposures associated with steam purging. Constructed using Thermon's unique and proven... [See More]
- Sleeve (Sheath) Material: Teflon®
- Maximum Operating (Sheath) Temperature: -60 to 302
- Heater Type: Heating Cables
- Phase: Single Phase AC Voltage
from Tempco Electric Heater Corporation
Typical Applications. Compatible with most plating tank solutions; inert to acids, anodizing and pickling solutions up to 190 °F (88 °C). Replaces more expensive alumina or graphite heaters. T1 thermal fuse protection standard; T2 bi-metal switch optional. Grounded internal metal element for... [See More]
- Sleeve (Sheath) Material: Teflon®
- Maximum Operating (Sheath) Temperature: 190
- Heater Type: Immersion Heater; Over the Side Heater
- Heating Capacity: 3.00 to 18.00
from Thermon, Inc
USX self-regulating heat tracing is specifically engineered for critical process maintenance and freeze protection applications where ultra-high temperature ratings are required. USX enables the use of ambient sensing controls for applications with continuous exposure temperatures up to 240°C... [See More]
- Sleeve (Sheath) Material: Teflon®
- Maximum Operating (Sheath) Temperature: -60 to 464
- Heater Type: Heating Cables
- Phase: Single Phase AC Voltage
from Tempco Electric Heater Corporation
Typical Applications. Compatible with most plating tank solutions; inert to acids, anodizing and pickling solutions up to 190 °F (88 °C). Replaces more expensive alumina or graphite heaters. T1 thermal fuse protection standard; T2 bi-metal switch optional. Grounded internal metal element for... [See More]
- Sleeve (Sheath) Material: Teflon®
- Maximum Operating (Sheath) Temperature: 190
- Heater Type: Immersion Heater; Over the Side Heater
- Heating Capacity: 1.00 to 6.00
from Thermon, Inc
High performance VSX-HT self-regulating heating cables are designed specifically for process temperature maintenance or freeze protection applications where high maintain temperatures or high temperature exposures are required. The heat output of VSX-HT cable varies in response to the surrounding... [See More]
- Sleeve (Sheath) Material: Teflon®
- Maximum Operating (Sheath) Temperature: -60 to 392
- Heater Type: Heating Cables
- Phase: Single Phase AC Voltage
from Tempco Electric Heater Corporation
Typical Applications. Compatible with most plating tank solutions; inert to acids, anodizing and pickling solutions up to 190 °F (88 °C). Replaces more expensive alumina or graphite heaters. T1 thermal fuse protection standard; T2 bi-metal switch optional. Grounded internal metal element for... [See More]
- Sleeve (Sheath) Material: Teflon®
- Maximum Operating (Sheath) Temperature: 190
- Heater Type: Immersion Heater; Over the Side Heater
- Heating Capacity: 2.00 to 12.00
from Thermon, Inc
KSR self-regulating heating cables are an integral part of Thermon's SnoTrace ™ snow and ice melting systems. Designed and approved specifically for direct burial, KSR cable withstands the abuse encountered during concrete placement. The self-regulating heat output of KSR cable varies in... [See More]
- Sleeve (Sheath) Material: Teflon®
- Phase: Single Phase AC Voltage
- Heater Type: Heating Cables
- AC Voltage Required: 208 to 277
from Tempco Electric Heater Corporation
Typical Applications. Compatible with most plating tank solutions; inert to acids, anodizing and pickling solutions up to 190 °F (88 °C). Replaces more expensive alumina or graphite heaters. T1 thermal fuse protection standard; T2 bi-metal switch optional. Grounded internal metal element for... [See More]
- Sleeve (Sheath) Material: Teflon®
- Maximum Operating (Sheath) Temperature: 190
- Heater Type: Immersion Heater; Over the Side Heater
- Heating Capacity: 3.00 to 18.00
from Thermon, Inc
High performance KSX self-regulating heating cables are designed specifically for high heat loss freeze protection applications or process temperature maintenance where steam cleaning is not required. The heat output of KSX cable varies in response to the surrounding temperature by reducing its... [See More]
- Sleeve (Sheath) Material: Teflon®
- Maximum Operating (Sheath) Temperature: -76 to 250
- Heater Type: Heating Cables
- Phase: Single Phase AC Voltage
from Thermon, Inc
A ThermTrac system provides a cost-effective alternative to conventional resistance heat tracing on long pipelines by eliminating the need for an extensive power distribution system. A pipeline up to 25 kilometers (15 miles) long can be traced from a single power point. The versatility of the system... [See More]
- Sleeve (Sheath) Material: Teflon®
- Phase: Single Phase AC Voltage
- Heater Type: Heating Cables
- AC Voltage Required: ? to 277
from Process Technology
Compatible with many aggressive chemistries. FEATURES. Heavy wall fluoropolymer sheath (PTFE) covered stainless steel element reduces permeation. Low watt densities of 10 watts/square inch (1.5 w/cm ²). Vapor resistant, flame retardant polypropylene terminal enclosure with 3 ft (.9m) flexible... [See More]
- Sleeve (Sheath) Material: Teflon®; Stainless Steel
- Heating Capacity: 1.00 to 6.00
- Heater Type: Immersion Heater
- Phase: Single Phase AC Voltage
from Trebor International
The Trebor ® thin film on quartz electric resistive heating technology is ideal for ultra-high purity DI water heating applications when process control, cleanliness, and system uptime are of the utmost importance. This patent pending technology utilizes GE 214 semiconductor grade quartz tubes... [See More]
- Sleeve (Sheath) Material: Teflon®
- Maximum Operating (Sheath) Temperature: 203
- Heater Type: Water Heaters; Circulation Heater
- Heating Capacity: 100.00
from Thermal Circuits, Inc.
Flexible Heaters from Thermal Circuits are light, bendable and can conform to irregular shapes, contours and 3-dimensional patterns. They are simple to apply, yet are capable of higher output than traditional metal-clad heaters.High-Temperature Mica Heaters. 175 Degrees Celsius (342 º F)... [See More]
- Sleeve (Sheath) Material: Teflon®
- Maximum Operating (Sheath) Temperature: 342
- Heater Type: Flexible Heater; Radiant Heater; Radiant Flat Panel Heater; Radiant Reflective Process Heater; Strip; Air Heater
from Process Technology
Excellent chemical resistance to aggressive acids. FEATURES. PTFE sleeved 304 stainless elements inert to most solutions up to 212 °F (100 °C). Low watt density design 10 watts/square inch (1.5w/cm ²). Vapor resistant, flame retardant polypropylene terminal enclosure with 3 ft (.9m)... [See More]
- Sleeve (Sheath) Material: Teflon®
- Maximum Operating (Sheath) Temperature: 212
- Heater Type: Immersion Heater
- Heating Capacity: 3.00 to 18.00
from Trebor International
The Trebor ® IQ in-line quartz chemical heater provides the ultra-high purity you demand, with the reliability you expect. The IQ's smooth flow path is free of particle traps and constructed entirely of GE 214 quartz and PFA, making it compatible with all acids, except HF and KOH. The PFA... [See More]
- Sleeve (Sheath) Material: Teflon®
- Maximum Operating (Sheath) Temperature: 212
- Heater Type: Inline Heater
- Heating Capacity: 3.00 to 6.00
from Thermal Circuits, Inc.
Flexible Heaters from Thermal Circuits are light, bendable and can conform to irregular shapes, contours and 3-dimensional patterns. They are simple to apply, yet are capable of higher output than traditional metal-clad heaters.High-Temperature Mica Heaters. 300 Degrees Celsius (572 º F)... [See More]
- Sleeve (Sheath) Material: Teflon®
- Maximum Operating (Sheath) Temperature: 572
- Heater Type: Flexible Heater; Radiant Heater; Radiant Flat Panel Heater; Radiant Reflective Process Heater; Strip; Air Heater
from Process Technology
Excellent chemical resistance to aggressive acids. FEATURES. PTFE sleeved 304 stainless elements inert to most solutions up to 212 °F (100 °C). Low watt density design 10 watts/square inch (1.5w/cm ²). Vapor resistant, flame retardant polypropylene terminal enclosure with 3 ft (.9m)... [See More]
- Sleeve (Sheath) Material: Teflon®
- Maximum Operating (Sheath) Temperature: 212
- Heater Type: Immersion Heater; Over the Side Heater
- Heating Capacity: 1.00 to 6.00
from Process Technology
Excellent chemical resistance to aggressive acids. FEATURES. PTFE sleeved 304 stainless elements inert to most solutions up to 212 °F (100 °C). Low watt density design 10 watts/square inch (1.5w/cm ²). Vapor resistant, flame retardant polypropylene terminal enclosure with 3 ft (.9m)... [See More]
- Sleeve (Sheath) Material: Teflon®
- Maximum Operating (Sheath) Temperature: 212
- Heater Type: Immersion Heater; Over the Side Heater
- Heating Capacity: 2.00 to 12.00
from Process Technology
Excellent chemical resistance to aggressive acids. FEATURES. PTFE sleeved 304 stainless elements inert to most solutions up to 212 °F (100 °C). Low watt density design 10 watts/square inch (1.5w/cm ²). Vapor resistant, flame retardant polypropylene terminal enclosure with 3 ft (.9m)... [See More]
- Sleeve (Sheath) Material: Teflon®
- Maximum Operating (Sheath) Temperature: 212
- Heater Type: Immersion Heater; Over the Side Heater
- Heating Capacity: 3.00 to 18.00
from Process Technology
Durable, efficient chemical heater. FEATURES. Heavy wall fluoropolymer sheath (PTFE) covered stainless steel element reduces permeation. Low watt density design 10 watts/square inch (1.5 w/cm ²). Vapor resistant, flame retardant polypropylene terminal enclosure with 3 ft (.9m) flexible PVC... [See More]
- Sleeve (Sheath) Material: Teflon®
- Maximum Operating (Sheath) Temperature: 212
- Heater Type: Immersion Heater
- Heating Capacity: 1.00 to 18.00
from Process Technology
Excellent chemical resistance to aggressive acids. FEATURES. PTFE sleeved 304 stainless elements inert to most solutions up to 212 °F (100 °C). Low watt density design 10 watts/square inch (1.5w/cm ²). 4 foot (1.2m) continuous fluoropolymer (PTFE) cable leading to a vapor resistant... [See More]
- Sleeve (Sheath) Material: Teflon®
- Maximum Operating (Sheath) Temperature: 212
- Heater Type: Immersion Heater
- Heating Capacity: 1.00 to 6.00
from Process Technology
Excellent chemical resistance to aggressive acids. FEATURES. PTFE sleeved 304 stainless elements inert to most solutions up to 212 °F (100 °C). Low watt density design 10 watts/square inch (1.5w/cm ²). 4 foot (1.2m) continuous fluoropolymer (PTFE) cable leading to a vapor resistant... [See More]
- Sleeve (Sheath) Material: Teflon®
- Maximum Operating (Sheath) Temperature: 212
- Heater Type: Immersion Heater
- Heating Capacity: 1.00 to 6.00
from Process Technology
Designed for the most demanding chemical applications and to provide years of trouble-free performance. FEATURES. Constructed with our exclusive patented N2 “purged ” elements for extended service life. High efficiency in a compact design, and an excellent alternative for replacing strip... [See More]
- Sleeve (Sheath) Material: Teflon®
- Maximum Operating (Sheath) Temperature: 266
- Heater Type: Immersion Heater
- Heating Capacity: 0.50 to 12.00
from Process Technology
Excellent chemical resistance to aggressive acids. FEATURES. PTFE sleeved 304 stainless elements inert to most solutions up to 212 °F (100 °C). Low watt density design 10 watts/square inch (1.5w/cm ²). Vapor resistant, flame retardant polypropylene terminal enclosure with 3 ft (.9m)... [See More]
- Sleeve (Sheath) Material: Teflon®
- Maximum Operating (Sheath) Temperature: 212
- Heater Type: Immersion Heater
- Heating Capacity: 1.50 to 18.00