Cartridge Heater Electric Heaters
from STEGO
The RCE 016 small heaters have been designed to prevent condensation and to ensure a minimum operating temperature in small enclosures. Technical Data. Operating voltage. see table below. Heating element. PTC resistor - temperature limiting. Heater body. aluminum, anodized. Insulation. PTFE /... [See More]
- Heater Type: Air Heater; Cartridge Heater; EnclosureHeater
- Heating Capacity: 0.01
- Maximum Operating (Sheath) Temperature: 329
- Phase: Single Phase AC Voltage
from RS Components, Ltd.
Heating cartridge [See More]
- Heater Type: Cartridge Heater
- AC Voltage Required: 230
- Heating Capacity: 0.20
from Backer Marathon, Inc.
The engineers at Backer Marathon have developed a swaged cartridge heater that exceeds the performance and durability of others in the industry. Through refinements in the swaging process, specially designed cores, careful selection of magnesium oxide fill, nickel chromium resistance wire, stainless... [See More]
- Heater Type: Cartridge Heater
- AC Voltage Required: 240
- Heating Capacity: 0.60
from Tempco Electric Heater Corporation
Bolt heaters are Hi-Density cartridge heaters with a wooden handle attached to a terminal conduit box for easy insertion and removal. [See More]
- Heater Type: Cartridge Heater
- Watt Density: 45 to 101
- AC Voltage Required: 240
from Heatron, Inc.
High altitude. High stress. High performance. The seamless metal jacket on this specialized cartridge heater is formed from a single sheet of metal, resulting in superior sheath integrity for high altitude and high stress applications. Deep drawn eliminates risk of weld failure when equipment... [See More]
- Heater Type: Cartridge Heater
- Insulation Options: Ceramic (optional feature); Mica (optional feature); silicone, Teflon®, epoxy
- Sleeve (Sheath) Material: Stainless Steel; Incoloy®
from Backer Hotwatt Inc.
Features. The Hotwatt Immersion Heater may be supplied with various junction boxes for additional terminal or lead protection. For corrosive environments, units can be supplied in other special alloys best suited to the operating conditions. The lead end of the unit may be sealed for extreme... [See More]
- Heater Type: Immersion Heater; Cartridge Heater
- Phase: Single Phase AC Voltage; Three Phase AC Voltage (optional feature)
- Heating Capacity: 0.12 to 21.00
- AC Voltage Required: 120 to 240
from RS Components, Ltd.
Heating cartridge [See More]
- Heater Type: Cartridge Heater
- AC Voltage Required: 230
- Heating Capacity: 0.20
from Tempco Electric Heater Corporation
Standard sheath material is 304 Stainless Steel which provides good thermal conductivity, and resistance to corrosion and scaling. Welded end disc made from the same material as the sheath provides a positive seal against moisture and other contaminants. Grade “A ” Nickel-Chrome... [See More]
- Heater Type: Cartridge Heater
from Heatron, Inc.
Quickly and safely transfers heated liquids, gases and oils. Heatron's heat exchanger consists of a high-density cartridge heater encased in a metal jacket with ports for transfer of medium to be heated. The compact design provides higher watt density and dielectric strength compared with tubular... [See More]
- Heater Type: Cartridge Heater
- Insulation Options: Ceramic (optional feature); Mica (optional feature); silicone, Teflon®, epoxy
- Sleeve (Sheath) Material: Stainless Steel; Incoloy®
from Backer Hotwatt Inc.
Features. Hotwatt Precision Cartridge Heaters provide localized heat to restricted work areas requiring close thermal control. Dies, Platens, and a variety of other types of processing equipment are efficiently heated. Closely controlled work temperatures up to 1250F are obtained by a combination of... [See More]
- Heater Type: Cartridge Heater
- Heating Capacity: 0.01 to 15.50
- Maximum Operating (Sheath) Temperature: 1250
- Phase: Single Phase AC Voltage
from RS Components, Ltd.
Cartridge Heater, 1/2" x 6", 600W [See More]
- Heater Type: Cartridge Heater
- AC Voltage Required: 230
- Heating Capacity: 0.60
from Tempco Electric Heater Corporation
Standard sheath material is 321 Stainless Steel which provides good thermal conductivity, and resistance to corrosion and scaling. Welded end disc made from the same material as the sheath provides a positive seal against moisture and other contaminants. Grade “A ” Nickel-Chrome... [See More]
- Heater Type: Cartridge Heater
- Watt Density: 100 to 300
- Maximum Operating (Sheath) Temperature: 1400
from Heatron, Inc.
Heatron high density cartridge heating elements excel in performance and durability. Using value-added controls, specialized coatings and finishes, and optimized design, Heatron creates the right balance of performance and features to meet your specification and budget requirements. Contact Heatron... [See More]
- Heater Type: Cartridge Heater
- Insulation Options: Ceramic (optional feature); Mica (optional feature); silicone, Teflon®, epoxy
- Sleeve (Sheath) Material: Stainless Steel; Incoloy®
from Backer Hotwatt Inc.
Features. The Hotwatt Square and Rectangular Cartridge Heater is designed to distribute maximum heat within a desired area. Because they are completely enclosed, square units will furnish more usable heat for a given wattage than a comparable strip heater attached to the exterior of a mod, platen,... [See More]
- Heater Type: Cartridge Heater
- Heating Capacity: 0.01 to 2.40
- Maximum Operating (Sheath) Temperature: 1200
- Phase: Single Phase AC Voltage
from RS Components, Ltd.
Cartridge Heater, 1/4" x 1 1/2", 175W [See More]
- Heater Type: Cartridge Heater
- AC Voltage Required: 230
- Heating Capacity: 0.17
from Tempco Electric Heater Corporation
Standard sheath material is 321 Stainless Steel which provides good thermal conductivity, and resistance to corrosion and scaling. Welded end disc made from the same material as the sheath provides a positive seal against moisture and other contaminants. Grade “A ” Nickel-Chrome... [See More]
- Heater Type: Cartridge Heater
- Watt Density: 4 to 32
- AC Voltage Required: 220 to 480
from Heatron, Inc.
Water, water-soluble and low viscosity fluid heater. Compact immersion cartridge heaters are designed for minimal assembly and ease of service in the field. With smaller fittings than tubular versions, tight spaces won't pose a problem for these high performance immersion cartridge heaters. Contact... [See More]
- Heater Type: Immersion Heater; Cartridge Heater
- Insulation Options: Ceramic (optional feature); Mica (optional feature); silicone, Teflon®, epoxy
- Sleeve (Sheath) Material: Stainless Steel; Incoloy®
- Applications: Clean Water Heating; Water-soluble And Low Viscosity Fluid
from Backer Hotwatt Inc.
Features. Both Standard (MS) and Superwatt (MH) constructions are available. Wattages other than those listed are available. Made in U.S.A. [See More]
- Heater Type: Cartridge Heater
- Heating Capacity: 0.01 to 0.90
- Maximum Operating (Sheath) Temperature: 1250
- Phase: Single Phase AC Voltage
from RS Components, Ltd.
Cartridge Heater, 1/4" x 2", 175W [See More]
- Heater Type: Cartridge Heater
- AC Voltage Required: 230
- Heating Capacity: 0.17
from Tempco Electric Heater Corporation
These heaters are constructed with the following Design Features: Passivated Incoloy Sheath. 10" long Teflon ® Insulated lead wires. Brass Fitting. Epoxy Seal at Lead End, 266 °F (130 °C) Standard, 194 °F (90 °C) UL Rating [See More]
- Heater Type: Immersion Heater; Water Heaters; Cartridge Heater
- Watt Density: 29 to 223
- AC Voltage Required: 120 to 480
- Sleeve (Sheath) Material: Incoloy®
from Heatron, Inc.
Integrated heat sink for fast heat dispersion and longer life. Quickly diffuse heat while maintaining a lower sheath temperature in closed environments by maximizing the heater's surface area in contact with the air. Heatron's hybrid heater is ideal for fast heat dispersion using forced convection. [See More]
- Heater Type: Air Heater; Cartridge Heater
- Insulation Options: Ceramic (optional feature); Mica (optional feature); silicone, Teflon®, epoxy
- Sleeve (Sheath) Material: Stainless Steel; Incoloy®
from Backer Hotwatt Inc.
Features: The Miniature Circulation Heater is a packaged heater for heating small volumes of liquids as in photographic developer solutions, chemicals, dyes and inks. Constructed of 316 series stainless steel. Pressures to 100 psig. [See More]
- Heater Type: Immersion Heater; Cartridge Heater
- Phase: Single Phase AC Voltage
- Heating Capacity: 100.00 to 1200.00
- AC Voltage Required: 120 to 240
from RS Components, Ltd.
Cartridge Heater, 1/4" x 4", 250W [See More]
- Heater Type: Cartridge Heater
- AC Voltage Required: 230
- Heating Capacity: 0.25
from Tempco Electric Heater Corporation
There are two types of InLine Forced Air Heaters: LDA – outlet temperature of 1000 °F (538 °C) and Inlet air or gas temperature up to 250 °F (121 °C). HAC – Exit air or gas temperature up to 1400 °F (760 °C) and Inlet air or gas temperature up to 250 °F (121... [See More]
- Heater Type: Inline Heater; Cartridge Heater
- Sleeve (Sheath) Material: Stainless Steel
- Maximum Operating (Sheath) Temperature: 1000
- Applications: Drying
from RS Components, Ltd.
Cartridge Heater, 10mm x 100mm, 350W [See More]
- Heater Type: Cartridge Heater
- AC Voltage Required: 230
- Heating Capacity: 0.35
from Tempco Electric Heater Corporation
Sheath material is 304 Stainless Steel which provides high temperature strength, good thermal conductivity and resistance to oxidation. Sheath is roll crimped over a 304 Stainless Steel end disc. This style end seal is not moisture proof. Helically wound Nickel-Chrome resistance wire is evenly... [See More]
- Heater Type: Cartridge Heater
- Watt Density: 20 to 45
- Maximum Operating (Sheath) Temperature: 1200
- Sleeve (Sheath) Material: Stainless Steel
from RS Components, Ltd.
Cartridge Heater, 10mm x 100mm, 500W [See More]
- Heater Type: Cartridge Heater
- AC Voltage Required: 230
- Heating Capacity: 0.50
from Tempco Electric Heater Corporation
These heaters are configured for specific tasks in the plastic injection molding environment with extra long leads, Teflon ® or fiberglass insulation, optional thermocouples and grounded sensor options at the end or middle of the heater. Design Features include: Hi-Density Swaged Construction. [See More]
- Heater Type: Cartridge Heater
- Watt Density: 71 to 255
- AC Voltage Required: 120 to 240
from RS Components, Ltd.
Cartridge Heater, 10mm x 160mm, 400W [See More]
- Heater Type: Cartridge Heater
- AC Voltage Required: 230
- Heating Capacity: 0.40
from Tempco Electric Heater Corporation
Like most Tempco Products, our highly engineered custom manufactured Cartridge Heaters are made to customer specifications. Below is a small sampling of the specialty Cartridge Heaters that Tempco has designed. [See More]
- Heater Type: Cartridge Heater
from RS Components, Ltd.
Cartridge Heater, 10mm x 40mm, 250W [See More]
- Heater Type: Cartridge Heater
- AC Voltage Required: 230
- Heating Capacity: 0.25
from Tempco Electric Heater Corporation
These heaters are constructed with the following Design Features: Hi-Density Swaged Construction with Single-End, Right-Angle Termination Location. 44" mica insulated 842 °F (450 °C) Lead Wires. 1" Diameter Heater Sheath. Incoloy Sheath Standard, SS Optional. 16 Gauge Stainless Steel... [See More]
- Heater Type: Water Heaters; Cartridge Heater
- Sleeve (Sheath) Material: Stainless Steel (optional feature); Incoloy®
from RS Components, Ltd.
Cartridge Heater, 10mm x 80mm, 300W [See More]
- Heater Type: Cartridge Heater
- AC Voltage Required: 230
- Heating Capacity: 0.30
from RS Components, Ltd.
Cartridge Heater, 12.5mm x 100mm, 400W [See More]
- Heater Type: Cartridge Heater
- AC Voltage Required: 230
- Heating Capacity: 0.40
from RS Components, Ltd.
Cartridge Heater, 12.5mm x 130mm, 600W [See More]
- Heater Type: Cartridge Heater
- AC Voltage Required: 230
- Heating Capacity: 0.60
from RS Components, Ltd.
Cartridge Heater, 12.5mm x 200mm, 800W [See More]
- Heater Type: Cartridge Heater
- AC Voltage Required: 230
- Heating Capacity: 0.80
from RS Components, Ltd.
Cartridge Heater, 12.5mm x 40mm, 250W [See More]
- Heater Type: Cartridge Heater
- AC Voltage Required: 230
- Heating Capacity: 0.25
from RS Components, Ltd.
Cartridge Heater, 16mm x 100mm, 500W [See More]
- Heater Type: Cartridge Heater
- AC Voltage Required: 230
- Heating Capacity: 0.50
from RS Components, Ltd.
Cartridge Heater, 16mm x 100mm, 800W [See More]
- Heater Type: Cartridge Heater
- AC Voltage Required: 230
- Heating Capacity: 0.80
from RS Components, Ltd.
Cartridge Heater, 16mm x 160mm, 1000W [See More]
- Heater Type: Cartridge Heater
- AC Voltage Required: 230
- Heating Capacity: 1.00
from RS Components, Ltd.
Cartridge Heater, 16mm x 160mm, 600W [See More]
- Heater Type: Cartridge Heater
- AC Voltage Required: 230
- Heating Capacity: 0.60
from RS Components, Ltd.
Cartridge Heater, 16mm x 160mm, 900W [See More]
- Heater Type: Cartridge Heater
- AC Voltage Required: 230
- Heating Capacity: 0.90
from RS Components, Ltd.
Cartridge Heater, 16mm x 200mm, 1250W [See More]
- Heater Type: Cartridge Heater
- AC Voltage Required: 230
- Heating Capacity: 1.25
from RS Components, Ltd.
Cartridge Heater, 16mm x 200mm, 800W [See More]
- Heater Type: Cartridge Heater
- AC Voltage Required: 230
- Heating Capacity: 0.80
from RS Components, Ltd.
Cartridge Heater, 16mm x 80mm, 300W [See More]
- Heater Type: Cartridge Heater
- AC Voltage Required: 230
- Heating Capacity: 0.30
from RS Components, Ltd.
Cartridge Heater, 3/8" x 2", 400W [See More]
- Heater Type: Cartridge Heater
- AC Voltage Required: 230
- Heating Capacity: 0.40
from RS Components, Ltd.
Cartridge Heater, 3/8" x 3 1/2", 400W [See More]
- Heater Type: Cartridge Heater
- AC Voltage Required: 230
- Heating Capacity: 0.40
from Vulcan Electric Co.
Vulcan Bolt Heaters are used in assembling large equipment and securing heavy apparatus to foundations. These units employ the principles of thermal expansion and contraction to expand large, hollowed-out studs and holding bolts. Available in a wide range of diameters, lengths, and wattages for many... [See More]
- Heater Type: Specialty Industrial Heaters; Bolt Hole Heater; Cartridge Heater
from DBK USA, Inc.
Cylindrical heating element for applications where there is no need for sheathing or this is a part of the machine, e.g. press. Functional characteristics. Defined heating capacity through resistance wire technology. Heating wire, threaded in heater former, and head made of ceramic 511. Heat... [See More]
- Heater Type: Cartridge Heater
- Sleeve (Sheath) Material: Glass Fibre Yarn
- Maximum Operating (Sheath) Temperature: 482
- Applications: Presses, Hot Plates
from Birk Manufacturing, Inc.
Birk Manufacturing is a leading thermal partner throughout the heat processing industry. Birk ’s cartridge heaters are known for their extremely high surface loading that allows large power to be delivered where space is extremely limited. A cartridge heater is a tube-shaped heating element... [See More]
- Heater Type: Flexible Heater; Tubular Heaters; Cartridge Heater
- Maximum Operating (Sheath) Temperature: 1112
from OMEGA Engineering, Inc.
•. Non-Metallic (CPVC) Pipe Body. •. 1.5 - 3 kW. •. 120 and 240V, Single Phase. •. General Purpose Terminal Enclosure. •. INCOLOY Sheath Elements (75 W/In 2 ). •. Integral Thermostat (60 - 190 °F). •. Integral Automatic Cutout (Set at 195 °F) [See More]
- Heater Type: Water Heaters; Cartridge Heater
- Heating Capacity: 1.50 to 3.00
- Maximum Operating (Sheath) Temperature: 195
- Phase: Single Phase AC Voltage
from Benchmark Thermal Corp.
Cartridge Heaters. Yield the highest possible watt density for those applications that require intense heat in a relatively small package. They have the virtue of parallel power leads feeding one end of the element, rather than a circuit requiring configuration for access to both ends. BENCHMARK... [See More]
- Heater Type: Cartridge Heater
- AC Voltage Required: 120 to 480
- Heating Capacity: 0.48 to 10.00
- Sleeve (Sheath) Material: Nickel Alloy; Ni-Cr wire around Mg-oxide cores
from Durex Industries
Magnum cartridge heaters from Durex are simply the benchmark of Industry. Packaging, Plastics Processing, Foodservice, and Process Industries alike look to our cartridge heaters as a reliable, effi cient, and cost effective heat source. Swaged-in designs are made for use in applications where high... [See More]
- Heater Type: Cartridge Heater
- Heating Capacity: 0.25
- Maximum Operating (Sheath) Temperature: 1500
- AC Voltage Required: 240
from Acrolab Ltd.
Cartridge heaters are round tubular heaters with electrical terminations on one side. These dependable heaters are made to withstand tough industrial usage. With a tolerance of ±0.002" on their outside diameter to secure a tight fit inside receptacle holes , and rock hard compaction of MgO... [See More]
- Heater Type: Cartridge Heater
- Heating Capacity: 1.20 to 5.30
- Maximum Operating (Sheath) Temperature: 1000 to 1500
- Phase: Single Phase AC Voltage; Three Phase AC Voltage
from Dalton Electric Heating Co., Inc.
Watt-Flex cartridge heaters are built-to-order to meet your electric process heating application. A variety of heater modifications and accessories are available for: Lead Modifications, Lead Wire Protection and High Temperature and mounting Modifications. For nearly 100 years, Dalton Electric... [See More]
- Heater Type: Immersion Heater; Cartridge Heater
- AC Voltage Required: 0.0 to 480
- Maximum Operating (Sheath) Temperature: 1850
- Sleeve (Sheath) Material: Stainless Steel; Incoloy
from Chromalox
Seamless Sheath - No Welded End Disk. 304 or 316 Stainless Steel Sheath. Electropolished (Option). Diameters Available: 1/8", 3/8", 1/2", 5/8", 3/4" (.3175, .635, .9525, 1.27, 1.5875, 1.905 cm). Lengths Up to 10" (25.4 cm). See Chart. High Watt Densities Available [See More]
- Heater Type: Cartridge Heater
- Sleeve (Sheath) Material: Stainless Steel
- AC Voltage Required: 240 to 480
- Applications: Dialysis, Nebulizers, Hydrotherapy, Pathology Analysis, Chromatographs, Water Baths, Cleaners/Washers, Potable Water Heater, Galley Equipment
from Vulcan Electric Co.
Cartridge Heaters are designed for use in close tolerance holes for application of a high concentration of heat. These heaters are ideal for heating solids in a limited amount of space. Units are available in diameter from 3/16" to 1 1/4" depending on type. Product is Underwriters Labs Recognized,... [See More]
- Heater Type: Cartridge Heater
from DBK USA, Inc.
Cylindrical heating elements with broad application range. They are used as: Radiation heating element. Contact heating element. Heating element for direct and indirect heating of liquids. Soldered into a screw head, one has a complete heating unit which can be completed with hood and controller... [See More]
- Heater Type: Cartridge Heater
- Sleeve (Sheath) Material: Glass Fibre Yarn
- Maximum Operating (Sheath) Temperature: 482 to 1112
- Applications: Baking Ovens, Heating of Oil, Water, Lye, Etc., Tools, Hot Plates, Moulds, Welding Tools
from OMEGA Engineering, Inc.
Adjustable range from -73 to 316 °C (-100 to 600 °F) offers wide field of application . Resolution sensitivity of -17.7 °C (0.1 °F) offers close control of process. Compact size; lengths under 127 mm (5") and diameters less than 20.6 mm (13.16") fit almost any application. Fast... [See More]
- Heater Type: Immersion Heater; Cartridge Heater
- Phase: Single Phase AC Voltage
- Maximum Operating (Sheath) Temperature: 600
- AC Voltage Required: 120 to 240
from Durex Industries
The standard cast-in pedestal heater manufactured by Durex for semicondcutor processing is designed to provide a quick solution for wafer processing applications. These cast-in heaters are designed specifically for 200mm and 300mm wafers. The standard design eliminates the need for costly tooling... [See More]
- Heater Type: Specialty Industrial Heaters; Pedestal Heater; Cartridge Heater
- Heating Capacity: 1.25
- Maximum Operating (Sheath) Temperature: 752
- AC Voltage Required: 208
from Acrolab Ltd.
Split Heaters can operate at temperatures over 1600 °F. This style of heater is best utilized in high temperature applications where a standard cartridge heater cannot operate properly. The unique split design allows a user to remove the heater with ease. Split Heaters can be manufactured with... [See More]
- Heater Type: Cartridge Heater
- AC Voltage Required: 120 to 480
- Maximum Operating (Sheath) Temperature: 932
from Dalton Electric Heating Co., Inc.
All Watt-Flex cartridge heaters are built-to-order to match your heating and size requirements. Available sizes for cartridges heaters are listed below. Watt-Flex cartridge heaters eliminate the need for a tight fit. When selecting the right diameter for the bore in your application, keep in mind... [See More]
- Heater Type: Cartridge Heater
- AC Voltage Required: 0.0 to 480
- Maximum Operating (Sheath) Temperature: 1850
- Sleeve (Sheath) Material: Stainless Steel (optional feature); Incoloy
from Chromalox
Edison Screw Base. 50 - 200 Watts. 120 and 240 Volt. Brass Sheath. Third-party certifications: UL Recognized (120V only), CSA (120V only) [See More]
- Heater Type: Cartridge Heater
- AC Voltage Required: 120 to 240
- Heating Capacity: 0.05 to 0.20
- Sleeve (Sheath) Material: Brass
from DBK USA, Inc.
Self-regulating heating element in an aluminium profile in flat design. Features: Compact and flat shape. Easy installation through the external profile lugs (e.g. screwing, riveting, etc.). Optimum heat conduction through the profile. Available in different power ranges [See More]
- Heater Type: Cartridge Heater
from OMEGA Engineering, Inc.
OMEGALUX ® CIR series high Watt density cartridge heaters are especially well suited for use in applications involving molds, dies, platens, hot plates, and sealing operations. They are available in lengths from 21/4" to 48". [See More]
- Heater Type: Cartridge Heater
- AC Voltage Required: 120 to 240
- Maximum Operating (Sheath) Temperature: 1500
- Watt Density: 21 to 148
from Acrolab Ltd.
These type of heaters are typically used for heated tooling or augmenting heat in molds. Cartridge heaters can withstand sheath temperatures of up to 1500 °F. There are a variety of builds and styles available from 90 ° exits, distributed wattage, cold zones, to multi-zone control. Check... [See More]
- Heater Type: Cartridge Heater
- AC Voltage Required: 120 to 480
- Maximum Operating (Sheath) Temperature: 932
from Chromalox
1,150 - 8,000 Watts. 120 and 240 Volt. 18 - 60" Lengths [See More]
- Heater Type: Cartridge Heater
- AC Voltage Required: 120 to 240
- Heating Capacity: 1.15 to 8.00
from DBK USA, Inc.
Self-regulating heating element in an aluminium profile in flat design. Features: Easy installation through the external profile lugs (e.g. screwing, riveting, etc.) Optimum heat conduction through the profile. Available in different power ranges [See More]
- Heater Type: Cartridge Heater
- Heating Capacity: 0.10
- Maximum Operating (Sheath) Temperature: 464
- AC Voltage Required: 110 to 240
from OMEGA Engineering, Inc.
OMEGALUX ® CIR series high watt density cartridge heaters are especially well suited for use in applications involving molds, dies, platens, hot plates, and sealing operations. They are available in lengths from 1" to 24". [See More]
- Heater Type: Cartridge Heater
- AC Voltage Required: 120 to 240
- Maximum Operating (Sheath) Temperature: 1500
- Watt Density: 29 to 262
from Chromalox
1 and 1-19/64" Dia. 140 - 1,780 Watts. 120 and 240 Volt. 11 - 50 W/In ². Brass Sheath. Two Bolt Terminals, One End. Up to 600 °F Max. Working Temp. CSA [See More]
- Heater Type: Cartridge Heater
- Heating Capacity: 0.14 to 1.78
- Maximum Operating (Sheath) Temperature: 600
- AC Voltage Required: 120 to 240
from DBK USA, Inc.
Self-regulating heating element of round shape with aluminium casing. The PAR-series consists of an aluminium tube, the PSA-series. Respectively, of an aluminium cup. Features: Compact heating element. Simple mounting. Optimum heat transfer through the aluminium casing. Various performance ranges... [See More]
- Heater Type: Cartridge Heater
- Heating Capacity: 0.15
- Maximum Operating (Sheath) Temperature: 464
- AC Voltage Required: 110 to 240
from OMEGA Engineering, Inc.
OMEGALUX ® CIR series high watt density cartridge heaters are manufactured to the highest industry standards using only premium materials. They have been designed to last longer and outperform any other brand cartridge heater in both laboratory and industrial applications. Their heavy duty... [See More]
- Heater Type: Cartridge Heater
- Watt Density: 64 to 388
- AC Voltage Required: 120 to 240
- Sleeve (Sheath) Material: Nickel Alloy
from Chromalox
0.553 and 0.66" Dia. 1,670 - 5,130 Watts. 120, 208, 240 and 480 Volt. 50 and 55 W/In ². 304 Stainless Steel Sheath [See More]
- Heater Type: Cartridge Heater
- Heating Capacity: 1.67 to 5.13
- Maximum Operating (Sheath) Temperature: 800
- AC Voltage Required: 120 to 480
from DBK USA, Inc.
Self-regulating heating element of rectangular shape with aluminium casing. Features: Compact heating element. Simple mounting. High thermal efficiency. Various performance ranges available [See More]
- Heater Type: Cartridge Heater
- Heating Capacity: 0.20
- Maximum Operating (Sheath) Temperature: 464
- AC Voltage Required: 110 to 240
from OMEGA Engineering, Inc.
OMEGALUX ® C Series heavy duty cartridge heaters are especially suited for use in applications involving hot plates, molds, dies, platens and container heating. Type CTRH is an extra high-quality cartridge heater. It is available in 0.553 and 0.663" diameter, sheath lengths up to 41/2 feet, and... [See More]
- Heater Type: Cartridge Heater
- AC Voltage Required: 120 to 240
- Maximum Operating (Sheath) Temperature: 600
- Watt Density: 18 to 33
from Chromalox
Maxi-Zone Heaters are the most rugged of our cartridge style heaters. These heaters can achieve continuous sheath temperatures up to 2000 °F (1095 °C). The INCONEL 600 sheath allows efficient operation at extreme temperatures. A unique feature is to provide two to three independently... [See More]
- Heater Type: Cartridge Heater
- Phase: Single Phase AC Voltage; Three Phase AC Voltage
- Maximum Operating (Sheath) Temperature: 2000
- AC Voltage Required: 110 to 480
from DBK USA, Inc.
Self-regulating heating element of rectangular shape with silicone casing. Features: Compact heating element. Simple mounting. Good heat transfer as silicone casing expands when heated. Various performance ranges available [See More]
- Heater Type: Cartridge Heater
- Heating Capacity: 0.10
- Maximum Operating (Sheath) Temperature: 392
- AC Voltage Required: 110 to 240
from OMEGA Engineering, Inc.
bull;. Premium Quality. •. Rugged Construction. •. 120V & 240V Models Available. •. Lengths from 11/4" (3cm) to 18" (46cm). •. Reliable, Premium Quality. •. Rugged, Shock and Vibration Resistant. •. U.L. Component Recognized. •. CSA Certified. •. Lengths... [See More]
- Heater Type: Cartridge Heater
- AC Voltage Required: 120 to 240
- Maximum Operating (Sheath) Temperature: 1500
- Watt Density: 29 to 171
from DBK USA, Inc.
Self-regulating heating element of round shape with silicone casing. Feature: Compact heating element. Simple mounting. Good heat transfer as silicone casing expands when heated. Various performance ranges available [See More]
- Heater Type: Cartridge Heater
- Heating Capacity: 0.10
- Maximum Operating (Sheath) Temperature: 392
- AC Voltage Required: 110 to 240
from OMEGA Engineering, Inc.
OMEGALUX ® CS series cartridge heaters provide high wattage in limited spaces. They are manufactured with 300 series stainless steel sheaths to precise dimensions and tolerances to ensure maximum heat transfer for minimum core temperature and faster heating. The CSS series cartridge heaters... [See More]
- Heater Type: Cartridge Heater
- Phase: Single Phase AC Voltage
- Maximum Operating (Sheath) Temperature: 1250
- AC Voltage Required: 120 to 240
from DBK USA, Inc.
Self-regulating Screw-in heating element with stainless steel case. Round design with G1/2 thread and hexagon. Optional with cable gland IP68. Features. Wide variety of applications. Compact design. Exceptionally resistant stainless steel casing. Robust construction. Optimal heat transfer. Multiple... [See More]
- Heater Type: Cartridge Heater
- AC Voltage Required: 12 to 240
- Maximum Operating (Sheath) Temperature: 158 to 428