Process Waters Electric Heaters
from Thermon, Inc
Caloritech ™ CX Replacement Boiler Flange Heaters are registered Caloritech ™ quality replacements for boilers of the highest commercial grade available anywhere. Replacement boiler flange heaters are available in a range of sizes and styles to suit the requirements of different boiler... [See More]
- Applications: Process Waters
- Phase: Single Phase AC Voltage
- Heater Type: Water Heaters; Specialty Industrial Heaters; Boiler Flange Heaters
- AC Voltage Required: 208 to 600
from Gaumer Process
Indirect Electric Water Bath Heaters use process coils submerged in a "bath" of water or glycol water mixtures. The process fluid flow through the process coils and is heated indirectly by the bath fluid. Indirectly heating the fluid provides safe and consistent heat and eliminates overheating. [See More]
- Applications: Process Waters
- Maximum Operating (Sheath) Temperature: 1400
- Heater Type: Water Heaters
- Watt Density: 2 to 90
from WATTCO
Wattco offers a wide variety of process heating equipment to our customers. We manufacture boiler heaters that suit many different sizes and dimensions that customers need. If a boiler has a flanged heater that need to be replaced, Wattco can replicate the model you currently have from practically... [See More]
- Applications: Clean Water Heating; Process Waters; Lightweight Oils & Degreasing Solutions; Medium Weight Oils; Caustic Solutions
- Heating Capacity: 5.00 to 3000.00
- Heater Type: Immersion Heater
- Sleeve (Sheath) Material: Copper; Nickel Alloy; Stainless Steel; Steel
from Tempco Electric Heater Corporation
Vessel material is SA53B or SA106B steel. Good for up to 750 °F (399 °C) operating temperature. Optional Heating source —1-1/4" and 2-1/2" Screw Plug Heaters are used on smaller units. 3" to 14" size heaters use Flanged Immersion Heaters. The flanges are made from forged steel rated... [See More]
- Applications: Process Waters
- Maximum Operating (Sheath) Temperature: 750
- Heater Type: Water Heaters; Circulation Heater
- Heating Capacity: 0.50 to 375.00
from Backer Hotwatt Inc.
Features. The Hotwatt Immersion Heater may be supplied with various junction boxes for additional terminal or lead protection. For corrosive environments, units can be supplied in other special alloys best suited to the operating conditions. The lead end of the unit may be sealed for extreme... [See More]
- Applications: OEM / Custom; Process Waters; Severe Corrosive Solutions (optional feature)
- Heating Capacity: 0.12 to 21.00
- Heater Type: Immersion Heater; Cartridge Heater
- Phase: Single Phase AC Voltage; Three Phase AC Voltage (optional feature)
from Gaumer Process
Gaumer Process provides standard and custom engineered medium voltage (4KV) electric heaters and associated medium voltage control panels to meet high energy demand for various applications. For generations, US manufacturing has been powered, quite literally, by fossil fuel. Natural gas, oil, and... [See More]
- Applications: Gases/Vapors; Process Waters
- AC Voltage Required: 4160
- Heater Type: Water Heaters; Specialty Industrial Heaters; Producing Steam, and Vaporizing Liquid to Gas
- Watt Density: 800
from WATTCO
Circulation Heaters also known as "in line heaters" use steel, stainless steel, and titanium in many applications. Lube oil and waste oil applications often use steel for circulation heaters as it is fairly inexpensive compared to stainless steel counterpart. Water circulation heaters are made with... [See More]
- Applications: Clean Water Heating; Process Waters; Lightweight Oils & Degreasing Solutions; Medium Weight Oils; Heavy Weight Oils; Mild Corrosive Solutions; Severe Corrosive Solutions; Food Equipment, Soap and Detergent Solutions, Freeze Protection
- Phase: Single Phase AC Voltage; Three Phase AC Voltage
- Heater Type: Circulation Heater
- Watt Density: 6.5 to 65
from Tempco Electric Heater Corporation
Flanged Immersion Heaters are designed for use in tanks and pressurized vessels to heat both liquids and gases. They mate to a companion flange that is either welded to a tank wall or, for circulating type heaters, to a pipe. [See More]
- Applications: Clean Water Heating; Process Waters; Lightweight Oils & Degreasing Solutions; Liquid Paraffin
- Maximum Operating (Sheath) Temperature: 350 to 1200
- Heater Type: Immersion Heater; Water Heaters
- Heating Capacity: 1.50 to 375.00
from Backer Hotwatt Inc.
Features: Designed for direct immersion thru 2 ” bung opening in 55 gallon drums. Incoloy sheath for long life in most materials. 60-250 ̊F integral thermostat. Manual reset thermostat protects against overheating. Adjustable mounting bracket. Low watt density (1000w - 120w - 8w watts per... [See More]
- Applications: OEM / Custom; Clean Water Heating; Process Waters
- Maximum Operating (Sheath) Temperature: 60 to 250
- Heater Type: Immersion Heater; Over the Side Heater; Drum Heater
- Heating Capacity: 1.00 to 4.00
from WATTCO
Finned tubular heating elements from WATTCO ™ are the most versatile and dependable electric heating element available today. These industrial heating solutions are among the most common heaters and are best suited for a large number of applications such as conduction, convection, and... [See More]
- Applications: Gases/Vapors; Clean Water Heating; Process Waters; Lightweight Oils & Degreasing Solutions; Medium Weight Oils; Heavy Weight Oils; Mild Corrosive Solutions; Severe Corrosive Solutions
- Maximum Operating (Sheath) Temperature: 1200
- Heater Type: Tubular Heaters
- Heating Capacity: 0.50 to 7.10
from Tempco Electric Heater Corporation
Screw Plug Immersion Heaters consist of tubular elements welded or brazed into a threaded screw plug which can then be inserted into a threaded opening in a tank wall or through a mating full or half coupling.. [See More]
- Applications: Clean Water Heating; Process Waters; Lightweight Oils & Degreasing Solutions; Liquid Paraffin
- Maximum Operating (Sheath) Temperature: 350 to 1200
- Heater Type: Immersion Heater
- Heating Capacity: 0.25 to 20.00
from WATTCO
Flanged heaters are commonly used in many chemical, petroleum and water based applications. Consisting normally of an ANSI rated flange with several hairpin elements or bugle tubular elements extending from the face of the flange, this electric heater uses direct heat application to the liquid... [See More]
- Applications: Clean Water Heating; Process Waters; Lightweight Oils & Degreasing Solutions; Medium Weight Oils; Mild Corrosive Solutions; Severe Corrosive Solutions; Food Equipment, Soap and Detergent Solutions, Freeze Protection
- Phase: Single Phase AC Voltage; Three Phase AC Voltage
- Heater Type: Immersion Heater
- AC Voltage Required: 208 to 600
from WATTCO
Industrial immersion heaters are a fast and efficient way of heating up various liquid solutions in processing equipment, as well as in large tanks through the use of tank immersion heaters. Heating up liquids using direct heat transfer allows for the liquid medium to quickly reach the desired... [See More]
- Applications: Clean Water Heating; Process Waters; Lightweight Oils & Degreasing Solutions; Medium Weight Oils; Heavy Weight Oils; Caustic Solutions; Liquid Paraffin; Solvents, Salts, Freeze Protection
- Phase: Single Phase AC Voltage; Three Phase AC Voltage
- Heater Type: Immersion Heater
- Sleeve (Sheath) Material: Nickel Alloy; Stainless Steel; Steel
from WATTCO
In line heaters (a.k.a circulation heaters) are ideal for processing fluid, including hazardous liquids, that requires intermediate heating while maintaining a flow rate. Instead of stripping the heat from another source as it would for a heat exchanger, an In line heater simply transfers the heat... [See More]
- Applications: Clean Water Heating; Process Waters; Chemicals, Food Industry
- Phase: Single Phase AC Voltage; Three Phase AC Voltage
- Heater Type: Circulation Heater
- AC Voltage Required: 120 to 600
from WATTCO
Over the Side Heaters are a popular industrial heating product for economic and practical uses. Using a water-resistant terminal housing, these industrial heaters come in many shapes and sizes to fit within your tank dimensions and specifications. Wattco over the side immersion heaters are custom... [See More]
- Applications: Clean Water Heating; Process Waters; Lightweight Oils & Degreasing Solutions; Medium Weight Oils; Heavy Weight Oils; Caustic Solutions; Liquid Paraffin; Solvents, Salts, Freeze Protection
- Phase: Single Phase AC Voltage; Three Phase AC Voltage
- Heater Type: Immersion Heater; Over the Side Heater; Drum Heater
- AC Voltage Required: 208 to 600
from WATTCO
Screw Plug heaters from WATTCO ™ consist of hairpin tubular elements that are brazed or welded into a machined pipe thread fitting, (normally an NPT fitting for North American standards) which are then screwed directly through a threaded coupling in the tank wall or vessel, or installed in... [See More]
- Applications: Clean Water Heating; Process Waters; Lightweight Oils & Degreasing Solutions; Medium Weight Oils; Heavy Weight Oils; Mild Corrosive Solutions; Severe Corrosive Solutions; Food Equipment, Soap and Detergent Solutions, Freeze Protection
- Phase: Single Phase AC Voltage; Three Phase AC Voltage
- Heater Type: Immersion Heater
- AC Voltage Required: 120 to 600
from WATTCO
Tubular heating elements from WATTCO ™ are the most versatile and the best-suited industrial heating solution for a large number of applications. Tubular elements from WATTCO ™ are factory-configured to almost any shape or size. Custom bending diameters can be made upon request and we... [See More]
- Applications: Gases/Vapors; Clean Water Heating; Process Waters; Lightweight Oils & Degreasing Solutions; Medium Weight Oils; Heavy Weight Oils; Mild Corrosive Solutions; Severe Corrosive Solutions; Food Equipment, Soap and Detergent Solutions, Freeze Protection
- Heating Capacity: 0.60 to 18.00
- Heater Type: Tubular Heaters
- Phase: Single Phase AC Voltage
from Sanden International (USA), Inc.
The SanCO2 heat pump water heater system consists of two parts. The Outdoor Unit, where the hot water is produced, using the CO2 refrigerant to extract heat from the ambient air, and the 60- or 80-gallon Storage Tank, which is usually installed inside the home. [See More]
- Applications: Clean Water Heating; Process Waters
- Maximum Operating (Sheath) Temperature: -15 to 110
- Heater Type: Water Heaters
- Heating Capacity: 1.00
from Process Heating Company, Inc.
The "Problem Solver" for underground tanks. Having trouble solving your underground storage tank problems? PHCo Lo-Density Drop-In Heater Kits have been designed for the heating of underground tanks and other applications that cannot be cut or welded on. These heaters can be used in multiples if... [See More]
- Applications: Clean Water Heating; Process Waters; Lightweight Oils & Degreasing Solutions; Medium Weight Oils; Heavy Weight Oils; Mild Corrosive Solutions; Severe Corrosive Solutions; Caustic Solutions; Liquid Paraffin; Ink, Asphalt, Pulp, & Construction
- Maximum Operating (Sheath) Temperature: 750
- Heater Type: Explosion-proof Heater (optional feature); Immersion Heater
- Heating Capacity: 8.00
from Trebor International
The Trebor ® thin film on quartz electric resistive heating technology is ideal for ultra-high purity DI water heating applications when process control, cleanliness, and system uptime are of the utmost importance. This patent pending technology utilizes GE 214 semiconductor grade quartz tubes... [See More]
- Applications: Clean Water Heating; Process Waters; High Purity Waters
- Maximum Operating (Sheath) Temperature: 203
- Heater Type: Water Heaters; Circulation Heater
- Heating Capacity: 100.00
from Thermal Fluid Systems, Inc.
Thermal Fluid Systems, Inc. provides custom design and supply of electric heating systems, with customized, stand alone, or skid mounting options. Critical components include heater, specially designed isolation valves, pump, strainer, degasser, expansion tank, burner, safety controls, SCR and power... [See More]
- Applications: Clean Water Heating; Process Waters; Lightweight Oils & Degreasing Solutions
- Maximum Operating (Sheath) Temperature: 750
- Heater Type: Circulation Heater
- Heating Capacity: 10.00 to 5000.00
from Durex Industries
Flanged immersion heaters are constructed with formed tubular heating elements brazed or welded to a high pressure flange for direct immersion into tanks and pressure vessels. Flanged immersion heaters are capable of achieving higher wattage requirements than screw plug heaters due to the fact that... [See More]
- Applications: Process Waters
- Heating Capacity: 0.19
- Heater Type: Explosion-proof Heater (optional feature); Immersion Heater
- Phase: Three Phase AC Voltage
from Process Technology
Durable, efficient chemical heater. FEATURES. Heavy wall metal sheaths available in steel, 304 stainless steel, 316 stainless steel and titanium. Low watt densities of 18 watts/square inch (2.8 w/cm ²). Vapor resistant, flame retardant polypropylene terminal enclosure with 3 ft (.9m) flexible... [See More]
- Applications: Process Waters; Mild Corrosive Solutions; Severe Corrosive Solutions; Most Aqueous Alkaline Solutions, Plating And Phosphate Tanks
- Maximum Operating (Sheath) Temperature: 180
- Heater Type: Immersion Heater; Over the Side Heater
- Heating Capacity: 0.50 to 6.00
from Infinity Fluids Corp.
ULTRA CENTAX Process Heaters - Power, Form, Function and Economy. Infinity Fluids has produced and patented the first non-contact, rapid-response electric heater available. The new CENTAX heater combines power, economy and simplicity to make your most challenging applications or processes more... [See More]
- Applications: Gases/Vapors; Clean Water Heating; Process Waters; High Purity Waters
- Max Air Temperature: 1200
- Heater Type: Inline Heater; Tubular Heaters; Water Heaters; Air Heater; Circulation Heater
- Heating Capacity: 0.10 to 250.00
from Heat Exchange & Transfer, Inc.
Type CH circulation heaters and CHP circulation packages are compact, self contained units designed to heat flowing liquids and gases, including super heating steam. Circulation heaters can be installed vertically or horizontally for in-line heating, or mounted vertically to a tank as a side arm... [See More]
- Applications: Gases/Vapors; Clean Water Heating; Process Waters; High Purity Waters; Lightweight Oils & Degreasing Solutions; Medium Weight Oils; Heavy Weight Oils; Mild Corrosive Solutions
- Heating Capacity: 6.00
- Heater Type: Water Heaters; Air Heater; Circulation Heater
- Phase: Three Phase AC Voltage
from Chromalox
208, 240 and 480 Volt, Three Phase. Third-party certifications: UL Recognized, CSA. Applications. Hot Water Storage Tanks. Warming Equipment. Preheating All Grades of Oil. Food Processing Equipment. Cleaning and Rinsing Tanks. Heat Transfer Systems. Process Air Equipment. Boiler Equipment. Freeze... [See More]
- Applications: Clean Water Heating; Process Waters
- Heating Capacity: 12.00 to 22.50
- Heater Type: Immersion Heater; Water Heaters
- Phase: Three Phase AC Voltage
from Acrolab Ltd.
This style of heater can be manufactured to almost any custom shape you require. They are typically round in cross-section and can handle application temperatures of up to 1400 °F. Tubular heaters can operate in free air, inside a groove, mounting to a surface, or cast into metal. There are a... [See More]
- Applications: OEM / Custom; Clean Water Heating; Process Waters; Lightweight Oils & Degreasing Solutions; Medium Weight Oils; Heavy Weight Oils; Mild Corrosive Solutions; Severe Corrosive Solutions; Application Subject To Sheath Material
- Maximum Operating (Sheath) Temperature: 1400
- Heater Type: Tubular Heaters
- Sleeve (Sheath) Material: Copper (optional feature); Stainless Steel (optional feature); Steel (optional feature); Incoloy
from OMEGA Engineering, Inc.
•. Flange Sizes 3" to 5" of High Grade Steel. •. General Purpose, NEMA 1 Rated Enclosure or Moisture Resistant, Explosion Resistant † Enclosure Available. •. Sturdy 0.475"Diameter Copper Elements. •. 6 to 150 kW. •. 240 and 480 Vac Power, 1 and 3 Phase [See More]
- Applications: Clean Water Heating; Process Waters
- Heating Capacity: 6.00 to 150.00
- Heater Type: Explosion-proof Heater (optional feature); Immersion Heater
- Phase: Single Phase AC Voltage; Three Phase AC Voltage
from Process Heating Company, Inc.
Flanged Immersion Heaters for use in tanks, large vats and reservoirs. These heaters consist of a standard 150# or 300# flange for mounting and PHCos exclusive heating elements. The elements are "dry well" and "low density" design. The dry wells allow the elements to be serviced or replaced without... [See More]
- Applications: Clean Water Heating; Process Waters; Lightweight Oils & Degreasing Solutions; Medium Weight Oils; Heavy Weight Oils; Mild Corrosive Solutions; Severe Corrosive Solutions; Caustic Solutions; Liquid Paraffin; Ink, Asphalt, Pulp, & Construction
- Maximum Operating (Sheath) Temperature: 750
- Heater Type: Explosion-proof Heater (optional feature); Immersion Heater
- Heating Capacity: 10.00
from Durex Industries
Screw plug immersion heaters utilize an NPT screw plug for direct immersion into liquids, oils, or other heat transfer mediums. These heaters utilize a rugged tubular heating element with sheath materials of copper, stainless steel, or Incoloy. The elements are formed and welded or brazed into the... [See More]
- Applications: Process Waters
- Maximum Operating (Sheath) Temperature: 750
- Heater Type: Explosion-proof Heater (optional feature); Immersion Heater
- Heating Capacity: 0.50
from Process Technology
Customer designed specifically for phosphate coating applications. FEATURES. For use in iron, zinc and manganese phosphate tanks. Schedule 40, heavy wall, 316 stainless steel sheath withstands scaling better than traditional heaters. Low watt densities up to 23 watts/square inch (3.5 w/cm ²)... [See More]
- Applications: Process Waters; Mild Corrosive Solutions; Severe Corrosive Solutions; Iron, Zinc And Manganese Phosphate Tanks
- Maximum Operating (Sheath) Temperature: 230
- Heater Type: Immersion Heater; Over the Side Heater
- Heating Capacity: 1.00 to 10.00
from Infinity Fluids Corp.
Compact, rapid heating of liquids, steam and gases for the most demanding applications. Infinity has developed and patented the most efficient and rapid response heater for all precision control processes with negligible pressure drop. Applications that demand precise temperature control and the... [See More]
- Applications: Gases/Vapors; Clean Water Heating; Process Waters; High Purity Waters
- Max Air Temperature: 1200
- Heater Type: Inline Heater; Water Heaters; Air Heater; Circulation Heater
- Heating Capacity: 0.25 to 10.00
from Heat Exchange & Transfer, Inc.
Type CH circulation heaters and CHP circulation packages are compact, self contained units designed to heat flowing liquids and gases, including super heating steam. Circulation heaters can be installed vertically or horizontally for in-line heating, or mounted vertically to a tank as a side arm... [See More]
- Applications: Gases/Vapors; Clean Water Heating; Process Waters; High Purity Waters; Lightweight Oils & Degreasing Solutions; Medium Weight Oils; Heavy Weight Oils; Mild Corrosive Solutions
- Heating Capacity: 6.00
- Heater Type: Water Heaters; Air Heater; Circulation Heater
- Phase: Three Phase AC Voltage
from Chromalox
2" NPT Brass Screw Plug. INCOLOY ® Sheath Elements. 52 - 56 W/In ². 5 - 15 kW. Integral Thermostat and Cutout. 208, 240 and 480 Volt, Three Phase. Third-party certifications: UL Listed, CSA [See More]
- Applications: Process Waters
- Heating Capacity: 5.00 to 15.00
- Heater Type: Immersion Heater
- Phase: Single Phase AC Voltage; Three Phase AC Voltage
from Acrolab Ltd.
Cartridge heaters are round tubular heaters with electrical terminations on one side. These dependable heaters are made to withstand tough industrial usage. With a tolerance of ±0.002" on their outside diameter to secure a tight fit inside receptacle holes , and rock hard compaction of MgO... [See More]
- Applications: Melting; OEM / Custom; Gases/Vapors; Clean Water Heating; Process Waters; Heating Tanks, Packaging Equipment
- Maximum Operating (Sheath) Temperature: 1000 to 1500
- Heater Type: Cartridge Heater
- Heating Capacity: 1.20 to 5.30
from OMEGA Engineering, Inc.
• Long Life Heating Elements with Stainless Steel (8% Nickel) Sheath. • For Very Weak Solutions or Industrial Process Water. • Zinc Coated Steel Flange. • 6 to 72 kW. • 240 and 480 V, 1 and 3 Phase [See More]
- Applications: Process Waters
- Heating Capacity: 6.00 to 72.00
- Heater Type: Immersion Heater
- Phase: Single Phase AC Voltage; Three Phase AC Voltage
from Process Heating Company, Inc.
Heater elements are readily available in lengths from two feet to forty feet and can be custom sized to match both heating requirements and tank dimensions. Single and three-phase elements can be furnished. Elements are constructed of nickel chromium alloy coils that are supported by patented... [See More]
- Applications: Clean Water Heating; Process Waters; Lightweight Oils & Degreasing Solutions; Medium Weight Oils; Heavy Weight Oils; Mild Corrosive Solutions; Severe Corrosive Solutions; Caustic Solutions; Liquid Paraffin; Ink, Asphalt, Pulp, & Construction
- Phase: Single Phase AC Voltage (optional feature); Three Phase AC Voltage (optional feature)
- Heater Type: Immersion Heater
- AC Voltage Required: 200 to 600
from Process Technology
Durable, efficient chemical heater. FEATURES. 316 stainless steel or titanium elements for use in most aqueous alkaline solutions and rinse tanks. Watt densities of 45-55 watts/square inch for 316 stainless and <60 watts/square inch for titanium. Vapor resistant, flame retardant PVC terminal... [See More]
- Applications: Process Waters; Mild Corrosive Solutions; Severe Corrosive Solutions; Most Aqueous Alkaline Solutions And Rinse Tanks
- Heating Capacity: 4.50 to 18.00
- Heater Type: Immersion Heater
- Phase: Single Phase AC Voltage (optional feature); Three Phase AC Voltage
from Infinity Fluids Corp.
Compact, rapid heating of liquids, steam and gases for semi-con, power generation, food service, chemical, pharmaceutical and all industrial applications Infinity has developed and patented the most efficient and rapid response heater for all precision control processes with negligible pressure... [See More]
- Applications: Gases/Vapors; Clean Water Heating; Process Waters; High Purity Waters
- Max Air Temperature: 1200
- Heater Type: Explosion-proof Heater (optional feature); Inline Heater; Water Heaters; Air Heater; Circulation Heater
- Heating Capacity: 10.00 to 72.00
from Heat Exchange & Transfer, Inc.
Flanged immersion heaters consist of a number of “U ” bend tubular heating elements welded into a standard ANSI pipe flange. Elements are supported with TEMA style baffles. A thermowell is installed through the center of the flange for the over temperature sensor. A NEMA rated enclosure... [See More]
- Applications: Drying; Gases/Vapors; Clean Water Heating; Process Waters; High Purity Waters; Lightweight Oils & Degreasing Solutions; Medium Weight Oils; Heavy Weight Oils; Mild Corrosive Solutions
- Heating Capacity: 6.00
- Heater Type: Immersion Heater; Air Heater
- Phase: Three Phase AC Voltage
from Chromalox
2" NPT Stainless Steel Passivated Screw Plug. Stainless Steel Passivated Sheath Elements. High Watt Density (45 W/In ²). 3 - 18 kW. Intergrated Thermostat (DPST). 240 and 480 Volt, Three Phase. General Purpose, Moisture Resistant/Explosion Resistant Terminal Enclosure. Third-party... [See More]
- Applications: Process Waters
- Heating Capacity: 3.00 to 18.00
- Heater Type: Immersion Heater
- Phase: Three Phase AC Voltage
from Acrolab Ltd.
Tubular heaters are highly adaptable to most applications where electrical heating is required. They can be used in their straight form or bent into various shapes. Tubular heaters can be used in free air, clamped to a surface, placed inside a groove or cast into metal. These versatile heating... [See More]
- Applications: OEM / Custom; Clean Water Heating; Process Waters; Lightweight Oils & Degreasing Solutions; Medium Weight Oils; Heavy Weight Oils; Mild Corrosive Solutions; Severe Corrosive Solutions; Application Subject To Sheath Material
- Maximum Operating (Sheath) Temperature: 1400
- Heater Type: Tubular Heaters
- AC Voltage Required: 120 to 480
from OMEGA Engineering, Inc.
Type TTSF heaters are used in industrial water boilers and storage tanks. They feature high watt density for rapid heat transfer. The steam boiler heaters feature the highest quality, high nickel Incoloy sheath that provides the highest practical protection available against hard water containing... [See More]
- Applications: Process Waters
- Heating Capacity: 5.00 to 18.00
- Heater Type: Immersion Heater
- Phase: Single Phase AC Voltage
from Process Heating Company, Inc.
No tanks to drain. Easily installed the heavy-duty assemblies weld directly into storage tanks to deliver long term and economical performance. Once installed, the flexible heater elements are removable from heater tubes without the need to drain the tank or disconnect fluid lines. LO-DENSITY IS A... [See More]
- Applications: Clean Water Heating; Process Waters; Lightweight Oils & Degreasing Solutions; Medium Weight Oils; Heavy Weight Oils; Mild Corrosive Solutions; Severe Corrosive Solutions; Caustic Solutions; Liquid Paraffin; Ink, Asphalt, Pulp, & Construction
- Maximum Operating (Sheath) Temperature: 750
- Heater Type: Explosion-proof Heater (optional feature); Immersion Heater
- Heating Capacity: 8.00
from Process Technology
Durable, efficient chemical heater. FEATURES. 316 stainless steel or titanium elements for use in most aqueous alkaline solutions and rinse tanks. Watt densities of 45-55 watts/square inch for 316 stainless and <60 watts/square inch for titanium. Vapor resistant, flame retardant PVC terminal... [See More]
- Applications: Process Waters; Mild Corrosive Solutions; Severe Corrosive Solutions; Most Aqueous Alkaline Solutions And Rinse Tanks
- Heating Capacity: 2.00 to 18.00
- Heater Type: Immersion Heater
- Phase: Single Phase AC Voltage (optional feature); Three Phase AC Voltage
from Infinity Fluids Corp.
Heating Nitrogen is a critical process, which requires a heater of minimal Watt Density (WSI), less than 25 watts/square inch is required to heat Nitrogen safely. All Infinity CRES-SFC Heaters provide the necessary WSI to safely heat all forms of gases. Units which use WSI higher than 25 run the... [See More]
- Applications: Drying; Gases/Vapors; Clean Water Heating; Process Waters; High Purity Waters
- Heating Capacity: 0.25 to 10.00
- Heater Type: Explosion-proof Heater (optional feature); Inline Heater; Water Heaters; Air Heater; Circulation Heater
- Phase: Single Phase AC Voltage; Three Phase AC Voltage (optional feature)
from Heat Exchange & Transfer, Inc.
The OCH (open coil heater) series of elements consists of helical wound nickel chromium resistance wires supported by interlocking ceramic insulators. The ceramic insulators are mounted on a flexible stainless steel strap which allows the element to be bent to an 18 ” radius. These flexible... [See More]
- Applications: Melting; Process Waters; Lightweight Oils & Degreasing Solutions; Asphalt
- Phase: Single Phase AC Voltage (optional feature); Three Phase AC Voltage (optional feature)
- Heater Type: Explosion-proof Heater (optional feature); Immersion Heater; Cable or Coil Heater
- AC Voltage Required: 120 to 600
from Chromalox
1" NPT stainless Steel Passivated Screw Plug. Stainless Steel Passivated Element. High Watt Density (64 - 86 W/In ²). 0.75 - 3 kW. Intergral Thermostat (SPST). 120 and 240 Volt, Single Phase. General Purpose, Moisture Resistant/Explosion Resistant Terminal Enclosure or Moisture Resistant. [See More]
- Applications: Process Waters
- Heating Capacity: 0.75 to 3.00
- Heater Type: Immersion Heater
- Phase: Single Phase AC Voltage
from OMEGA Engineering, Inc.
The OMEGALUX ® MTS -2 Series process water immersion heater is available for applications with mild acid or alkaline conditions. The passivated stainless steel construction allows complete compatibility. [See More]
- Applications: Process Waters
- Heating Capacity: 1.50 to 15.00
- Heater Type: Explosion-proof Heater (optional feature); Immersion Heater
- Phase: Single Phase AC Voltage
from Process Heating Company, Inc.
Rigid Tubular Drywell Heaters solve the problem of heating viscous products without damage to the product being heated. The Rigid Heaters can be installed as new or as replacement equipment for existing metal sheathed style tubular units that have higher watt density. Process Heatings Rigid Heaters... [See More]
- Applications: Clean Water Heating; Process Waters; Lightweight Oils & Degreasing Solutions; Medium Weight Oils; Heavy Weight Oils; Mild Corrosive Solutions; Severe Corrosive Solutions; Caustic Solutions; Liquid Paraffin; Ink, Asphalt, Pulp, & Construction
- Maximum Operating (Sheath) Temperature: 750
- Heater Type: Explosion-proof Heater (optional feature); Immersion Heater
- Heating Capacity: 0.05
from Process Technology
Durable, efficient chemical heater. FEATURES. 304 stainless, 316 stainless steel or titanium elements for use in most aqueous alkaline solutions and plating and phosphate tanks. Watt densities up to 35 watts/square inch (5.4 w/cm ²). Vapor resistant, flame retardant PVC terminal enclosure with... [See More]
- Applications: Process Waters; Mild Corrosive Solutions; Severe Corrosive Solutions; Most Aqueous Alkaline Solutions, Plating And Phosphate Tanks
- Heating Capacity: 1.00 to 12.00
- Heater Type: Immersion Heater
- Phase: Single Phase AC Voltage; Three Phase AC Voltage (optional feature)
from Heat Exchange & Transfer, Inc.
The UST (Unitary Storage Tank) heater is a completely packaged tank heating unit. The UST utilizes a flexible open coil heating element. The open coil heater consists of nickel chromium resistance coils supported in high temperature ceramic insulators on a flexible stainless steel strap. Each... [See More]
- Applications: Melting; Clean Water Heating; Process Waters; High Purity Waters; Lightweight Oils & Degreasing Solutions; Medium Weight Oils; Heavy Weight Oils; Mild Corrosive Solutions; Caustic Solutions; Liquid Paraffin; Asphalt, Wax, Pitch, Creosote
- Heating Capacity: 10.00
- Heater Type: Explosion-proof Heater (optional feature); Immersion Heater
- Phase: Three Phase AC Voltage
from Chromalox
1-1/4" NPT Stainless Steel Passivated Screw Plug. Stainless Steel Passivated Element. High Watt Density (43 - 86 W/In ²). 1 - 2 kW. Integral Thermostat (SPST). 120 and 240 Volt, Single Phase. General Purpose or Moisture Resistant/Explosion Resistant Terminal Enclosure. Third-party... [See More]
- Applications: Process Waters
- Heating Capacity: 1.00 to 2.00
- Heater Type: Immersion Heater
- Phase: Single Phase AC Voltage
from OMEGA Engineering, Inc.
OMEGA ® flow through heaters are designed primarily for providing heat that regulates liquid temperature from 32 to 88 °C (90 to 190 °F). The heaters have a titanium element that resists corrosion. The flow through tube is 381 mm (15") long and has 1 NPT female pipe connections and is... [See More]
- Applications: Process Waters
- Maximum Operating (Sheath) Temperature: 210
- Heater Type: Water Heaters; Cast-In Heater
- Phase: Single Phase AC Voltage
from Process Heating Company, Inc.
Unitized Heaters remain Process Heating Company's best selling product line. Its popularity continues due to the ease of installation into any tank or vat; its 100% efficiency; its ease of automation; its lack of maintenance and remarkable reliability. The Lo-Density Unitized Heater dissipates as... [See More]
- Applications: Clean Water Heating; Process Waters; Lightweight Oils & Degreasing Solutions; Medium Weight Oils; Heavy Weight Oils; Mild Corrosive Solutions; Severe Corrosive Solutions; Caustic Solutions; Liquid Paraffin; Ink, Asphalt, Pulp, & Construction
- Maximum Operating (Sheath) Temperature: 750
- Heater Type: Explosion-proof Heater (optional feature); Immersion Heater
- Heating Capacity: 8.00
from Process Technology
Durable, efficient chemical heater. FEATURES. Heavy wall metal sheaths available in steel, 304 stainless steel, 316 stainless steel and titanium. Watt densities up to 40 watts/square inch (6.2 w/cm ²). Vapor resistant, flame retardant polypropylene terminal enclosure with 3 ft (.9m) flexible... [See More]
- Applications: Process Waters; Mild Corrosive Solutions; Severe Corrosive Solutions; Most Aqueous Alkaline Solutions And Rinse Tanks
- Maximum Operating (Sheath) Temperature: 180
- Heater Type: Immersion Heater; Over the Side Heater
- Heating Capacity: 3.00 to 10.50
from Chromalox
2" NPT Stainless Steel Passivated Screw Plug. Stainless Steel Passivated Sheath Elements. High Watt Density (43 - 51 W/In ²). 2 - 15 kW. Integral Thermostat (DPST). 208, 240 and 480 Volt, Single Phase. General Purpose Terminal Enclosure. Third-party certifications: UL Listed, CSA, cCSAus [See More]
- Applications: Process Waters
- Heating Capacity: 2.00 to 15.00
- Heater Type: Immersion Heater
- Phase: Single Phase AC Voltage
from OMEGA Engineering, Inc.
bull;. Compact .475" Diameter Electropolished Stainless Steel Sheath; 3 Element Design. •. General Purpose; NEMA-1 Rated Enclosure or Explosion Resistant Enclosure Available. •. 2" NPT Electropolished Stainless Steel Screw Plug. •. 3 to 18 kW. •. Rugged, Reliable, Premium... [See More]
- Applications: Process Waters
- Heating Capacity: 3.00 to 18.00
- Heater Type: Immersion Heater
- Phase: Single Phase AC Voltage (optional feature); Three Phase AC Voltage (optional feature)
from Process Technology
Durable, efficient chemical heater. FEATURES. Heavy wall metal sheaths available in 316 stainless steel. Watt densities up to 40 watts/square inch (6.2 w/cm ²). Vapor resistant, flame retardant polypropylene terminal enclosure with 3 ft (.9m) flexible PVC liquid tight conduit. Grounded... [See More]
- Applications: Process Waters; Mild Corrosive Solutions; Severe Corrosive Solutions; Most Aqueous Alkaline Solutions And Rinse Tanks
- Maximum Operating (Sheath) Temperature: 180
- Heater Type: Immersion Heater
- Heating Capacity: 9.00 to 31.50
from Chromalox
2-1/2" NPT Stainless Steel Passivated Screw Plug. Moisture Resistant/Explosion Resistant Terminal Enclosure. Stainless Steel Passivated Sheath Elements. High Watt Density (46 - 53 W/In ²). 3 - 18 kW. Integral Thermostat (DPST). 208, 240 and 480 Volt, Single Phase. Third-party certifications: UL... [See More]
- Applications: Process Waters
- Heating Capacity: 3.00 to 18.00
- Heater Type: Immersion Heater
- Phase: Three Phase AC Voltage
from OMEGA Engineering, Inc.
•. Stainless Steel Wetted Construction. •. 120, 208, 240, 480V 1 and 3 Phase Power. •. Reliable Heater Design. •. General Purpose Enclosure, NEMA-1 Rated and UL Listed [See More]
- Applications: Process Waters
- Heating Capacity: 3.00 to 18.00
- Heater Type: Explosion-proof Heater (optional feature); Immersion Heater
- Phase: Single Phase AC Voltage (optional feature); Three Phase AC Voltage (optional feature)
from Process Technology
Durable, efficient chemical heater. FEATURES. Heavy wall metal sheaths available in steel, 304 stainless steel, 316 stainless steel and titanium. Watt densities up to 35 watts/square inch (5.4 w/cm ²). Vapor resistant, flame retardant polypropylene terminal enclosure with 3 ft (.9m) flexible... [See More]
- Applications: Process Waters; Mild Corrosive Solutions; Severe Corrosive Solutions; Most Aqueous Alkaline Solutions And Rinse Tanks
- Maximum Operating (Sheath) Temperature: 180
- Heater Type: Immersion Heater; Over the Side Heater
- Heating Capacity: 18.00 to 54.00
from Chromalox
2" NPT Stainless Steel Passivated Screw Plug. Stainless Steel Passivated Sheath Elements. 3 - 18 kW. 208, 240 and 480 Volt, 1 and 3 Phase. High Watt Density (38 - 47 W/In ²). Without Thermostat. General Purpose, Moisture Resistant/Explosion Resistant Terminal Enclosure or Moisture Resistant. [See More]
- Applications: Process Waters
- Heating Capacity: 3.00 to 18.00
- Heater Type: Immersion Heater
- Phase: Single Phase AC Voltage; Three Phase AC Voltage
from OMEGA Engineering, Inc.
•. 2 NPT Stainless Steel Screw Plug. •. IncoloySheath Elements. •. High Watt Density (45 W/in2). •. 3 to 18 kW. •. Without Thermostat. •. 240 and 480 Volt, Three Phase. •. General Purpose or Moisture-Resistant/ Explosion-Resistant Terminal Enclosure [See More]
- Applications: Process Waters
- Heating Capacity: 3.00 to 18.00
- Heater Type: Immersion Heater
- Phase: Three Phase AC Voltage
from Process Technology
Durable, efficient chemical heater. FEATURES. Heavy wall metal sheaths available in steel, 304 stainless steel, 316 stainless steel and titanium. Watt densities up to 40 watts/square inch (6.2 w/cm ²). Vapor resistant, flame retardant polypropylene terminal enclosure with 3 ft (.9m) flexible... [See More]
- Applications: Process Waters; Mild Corrosive Solutions; Severe Corrosive Solutions; Most Aqueous Alkaline Solutions, Electroplating And Rinse Tanks
- Maximum Operating (Sheath) Temperature: 180
- Heater Type: Immersion Heater
- Heating Capacity: 3.00 to 72.00
from Chromalox
1-1/4" NPT Stainless Steel Passivated Screw Plug. Stainless Steel Passivated Elements. High Watt Density (43 - 86 W/In ²). 1 - 2 kW. Without Thermostat. 120 and 240 Volt, Single Phase. General Purpose, Moisture Resistant/Explosion Resistant Terminal Enclosure or Moisture Resistant. Third-party... [See More]
- Applications: Process Waters
- Heating Capacity: 1.00 to 2.00
- Heater Type: Immersion Heater
- Phase: Single Phase AC Voltage
from OMEGA Engineering, Inc.
bull;. 1" NPT Stainless Steel Passivated Screw Plug. •. Stainless Steel Passivated Elements. •. High Watt Density (64 to 86 W/in2). •. 0.75 to 3 kW. •. Without Thermostat. •. 120 and 240 Volt, Single Phase. •. General Purpose or Moisture-Resistant/ Explosion-Resistant... [See More]
- Applications: Process Waters
- Heating Capacity: 0.75 to 3.00
- Heater Type: Explosion-proof Heater (optional feature); Immersion Heater
- Phase: Single Phase AC Voltage
from Process Technology
Durable, efficient chemical heater. FEATURES. Heavy wall metal sheaths available in 316 stainless steel. Watt densities up to 40 watts/square inch (6.2 w/cm ²). Vapor resistant, flame retardant polypropylene terminal enclosure with 3 ft (.9m) flexible PVC liquid tight conduit. Grounded... [See More]
- Applications: Process Waters; Mild Corrosive Solutions; Severe Corrosive Solutions; Most Aqueous Alkaline Solutions And Rinse Tanks
- Maximum Operating (Sheath) Temperature: 180
- Heater Type: Immersion Heater; Over the Side Heater
- Heating Capacity: 6.00 to 21.00
from Chromalox
2" NPT Stainless Steel Passivated Screw Plug. Stainless Steel Passivated Sheath Elements. High Watt Density (43 - 51 W/In ²). 1.5 - 15 kW. Without Thermostat. 120, 208, 240 and 480 Volt, Single Phase. Third-party certifications: UL Listed, CSA, cCSAus [See More]
- Applications: Process Waters
- Heating Capacity: 1.50 to 15.00
- Heater Type: Immersion Heater
- Phase: Single Phase AC Voltage
from OMEGA Engineering, Inc.
bull;. 1 ¼" NPT Stainless Steel Passivated Screw Plug. •. Stainless Steel Passivated Elements. •. High Watt Density (43 to 86 W/in2). •. 1 to 2 kW. •. Without Thermostat. •. 120 and 240 Volt, Single Phase. •. General Purpose or Moisture-Resistant/... [See More]
- Applications: Process Waters
- Heating Capacity: 1.00 to 2.00
- Heater Type: Explosion-proof Heater (optional feature); Immersion Heater
- Phase: Single Phase AC Voltage
from Process Technology
Durable, efficient chemical heater. FEATURES. Heavy wall metal sheaths available in steel, 304 stainless steel, 316 stainless steel and titanium. Low watt densities of 18 watts/square inch (2.8 w/cm ²). Vapor resistant, flame retardant polypropylene terminal enclosure with 3 ft (.9m) flexible... [See More]
- Applications: Process Waters; Mild Corrosive Solutions; Severe Corrosive Solutions; Most Aqueous Alkaline Solutions, Plating And Phosphate Tanks
- Maximum Operating (Sheath) Temperature: 180
- Heater Type: Immersion Heater; Over the Side Heater
- Heating Capacity: 0.50 to 6.00
from Chromalox
2-1/2" NPT Stainless Steel Passivated Screw Plug. Stainless Steel Passivated Sheath Elements. High Watt Density (46 - 53 W/In ²). 3 - 18 kW. Without Thermostat. 120, 208, 240 and 480 Volt, 1 & 3 Phase. General Purpose, Moisture Resistant/Explosion Resistant Terminal Enclosure or Moisture... [See More]
- Applications: Process Waters
- Heating Capacity: 3.00 to 18.00
- Heater Type: Immersion Heater
- Phase: Single Phase AC Voltage; Three Phase AC Voltage
from OMEGA Engineering, Inc.
These screw plug immersion heaters feature a dead front nylon twist-lock grounded plug with receptacle. Cord is supplied by the user. The cartridge element is brazed to a standard 1/2" or 3/4" screw plug. [See More]
- Applications: Process Waters
- Heating Capacity: 0.25 to 0.75
- Heater Type: Immersion Heater
- Phase: Single Phase AC Voltage
from Process Technology
Durable, efficient chemical heater. FEATURES. Heavy wall metal sheaths available in steel, 304 stainless steel, 316 stainless steel and titanium. Low watt densities of 18 watts/square inch (2.8 w/cm ²). Vapor resistant, flame retardant polypropylene terminal enclosure with 3 ft (.9m) flexible... [See More]
- Applications: Process Waters; Mild Corrosive Solutions; Severe Corrosive Solutions; Most Aqueous Alkaline Solutions, Plating And Phosphate Tanks
- Maximum Operating (Sheath) Temperature: 180
- Heater Type: Immersion Heater; Over the Side Heater
- Heating Capacity: 1.50 to 18.00
from Chromalox
2-1/2 x 2-1/2" Square Brass Flange. Copper Sheath Elements. High Watt Densities (See Catalog Page for Table). 13.5 - 18 kW. 208 and 480 Volt, Three Phase. Third-party certifications: UL Recognized, CSA [See More]
- Applications: Clean Water Heating; Process Waters
- Heating Capacity: 5.00 to 18.00
- Heater Type: Immersion Heater
- Phase: Three Phase AC Voltage
from OMEGA Engineering, Inc.
These screw plug immersion heaters feature dual pipe thread construction which allows easy installation into your process and quick connection of electrical conduit. [See More]
- Applications: Process Waters
- Heating Capacity: 0.10 to 1.00
- Heater Type: Immersion Heater
- Phase: Single Phase AC Voltage
from Process Technology
Excellent for laboratory and small tank applications. FEATURES. 304 stainless steel, 316 stainless steel or titanium provide protection from most chemistries. Low watt densities up to 40 watts/square inch (6.5 w/cm ²). Vapor resistant, flame retardant polypropylene terminal enclosure with 3 ft... [See More]
- Applications: Process Waters; Mild Corrosive Solutions; Severe Corrosive Solutions; Most Aqueous Alkaline Solutions, Plating And Phosphate Tanks
- Heating Capacity: 0.50 to 2.00
- Heater Type: Immersion Heater; Specialty Industrial Heaters; Tank Heater
- Phase: Single Phase AC Voltage; Three Phase AC Voltage
from Chromalox
LTFX units provide low watt density heating over a large surface area, while providing precise temperature control for such materials as fire water storage, asphalt, diesel, lube oils, ethanol, bio-diesel, glycerin, animal fats, vegetable oils, fuel oils, or similar types of liquids. 4 - 240 kW Unit... [See More]
- Applications: Clean Water Heating; Process Waters; Lightweight Oils & Degreasing Solutions; Medium Weight Oils; Heavy Weight Oils; Mild Corrosive Solutions; Severe Corrosive Solutions; Liquid Paraffin
- Heating Capacity: 4.00 to 240.00
- Heater Type: Explosion-proof Heater; Immersion Heater
- Phase: Three Phase AC Voltage
from Process Technology
Heater cannot ignite plastic even if operated in air. FEATURES. Safety is built in, not added on. Heater self limits its maximum operating temperature to 482 °F (250 °C). This is lower than the ignition point of most plastics. Watt densities up to 26 watts/square inch (4 w/cm ²). Vapor... [See More]
- Applications: Process Waters; Mild Corrosive Solutions; Severe Corrosive Solutions; Most Aqueous Alkaline Solutions And Rinse Tanks
- Maximum Operating (Sheath) Temperature: 482
- Heater Type: Immersion Heater
- Heating Capacity: 1.00 to 6.00
from Chromalox
STFX units provide replaceable-element design in a compact setting, while providing precise temperature control. Units comply with API- 614 and can be used for such materials as lube oil, fire water storage, water solutions, asphalt, water/glycol, diesel, acidic solutions, ethanol, bio-diesel... [See More]
- Applications: Clean Water Heating; Process Waters; Lightweight Oils & Degreasing Solutions; Medium Weight Oils; Heavy Weight Oils; Mild Corrosive Solutions; Severe Corrosive Solutions; Liquid Paraffin
- Heating Capacity: 1.00 to 25.00
- Heater Type: Immersion Heater
- Phase: Three Phase AC Voltage
from Process Technology
Heater cannot ignite plastic even if operated in air. FEATURES. Safety is built in, not added on. Heater self limits its maximum operating temperature to 482 °F (250 °C). This is lower than the ignition point of most plastics. Watt densities up to 26 watts/square inch (4 w/cm ²). Vapor... [See More]
- Applications: Process Waters; Mild Corrosive Solutions; Severe Corrosive Solutions; Most Aqueous Alkaline Solutions, Electroplating And Rinse Tanks
- Maximum Operating (Sheath) Temperature: 482
- Heater Type: Immersion Heater
- Heating Capacity: 1.00 to 6.00
from Process Technology
Heater cannot ignite plastic even if operated in air. FEATURES. Safety is built in, not added on. Heater self limits its maximum operating temperature to 482 °F (250 °C). This is lower than the ignition point of most plastics. Watt densities up to 26 watts/square inch (4 w/cm ²). Vapor... [See More]
- Applications: Process Waters; Mild Corrosive Solutions; Severe Corrosive Solutions; Most Aqueous Alkaline Solutions And Rinse Tanks
- Maximum Operating (Sheath) Temperature: 482
- Heater Type: Immersion Heater; Over the Side Heater
- Heating Capacity: 1.00 to 5.60
from Process Technology
Heater cannot ignite plastic even if operated in air. FEATURES. Safety is built in, not added on. Heater self limits its maximum operating temperature to 482 °F (250 °C). This is lower than the ignition point of most plastics. Watt densities up to 26 watts/square inch (4 w/cm ²). Vapor... [See More]
- Applications: Process Waters; Mild Corrosive Solutions; Severe Corrosive Solutions; Most Aqueous Alkaline Solutions, Electroplating And Rinse Tanks
- Maximum Operating (Sheath) Temperature: 482
- Heater Type: Immersion Heater
- Heating Capacity: 2.40 to 18.00
from Process Technology
Heater cannot ignite plastic even if operated in air. FEATURES. Safety is built in, not added on. Heater self limits its maximum operating temperature to 482 °F (250 °C). This is lower than the ignition point of most plastics. Watt densities up to 26 watts/square inch (4 w/cm ²). Vapor... [See More]
- Applications: Process Waters; Mild Corrosive Solutions; Severe Corrosive Solutions; Most Aqueous Alkaline Solutions And Rinse Tanks
- Maximum Operating (Sheath) Temperature: 482
- Heater Type: Immersion Heater; Over the Side Heater
- Heating Capacity: 3.00 to 18.00
from Process Technology
Durable, efficient chemical heater. FEATURES. Heavy wall metal sheaths available in steel, 304 stainless steel, 316 stainless steel and titanium. Low watt densities of 18 watts/square inch (2.8 w/cm ²). Vapor resistant, flame retardant polypropylene terminal enclosure with 3 ft (.9m) flexible... [See More]
- Applications: Process Waters; Mild Corrosive Solutions; Severe Corrosive Solutions; Most Aqueous Alkaline Solutions, Plating And Phosphate Tanks
- Maximum Operating (Sheath) Temperature: 180
- Heater Type: Immersion Heater; Over the Side Heater
- Heating Capacity: 1.50 to 18.00
from Process Technology
Durable, efficient chemical heater. FEATURES. Heavy wall metal sheaths available in steel, 304 stainless steel, 316 stainless steel and titanium. Watt densities up to 35 watts/square inch (5.4 w/cm ²). Vapor resistant, flame retardant polypropylene terminal enclosure with 3 ft (.9m) flexible... [See More]
- Applications: Process Waters; Mild Corrosive Solutions; Severe Corrosive Solutions; Most Aqueous Alkaline Solutions, Plating And Phosphate Tanks
- Maximum Operating (Sheath) Temperature: 180
- Heater Type: Immersion Heater; Over the Side Heater
- Heating Capacity: 3.00 to 36.00