RS485 Stepper Motor Drives
from OMEGA Engineering, Inc.
The STAC6 represents the latest developments in stepper drive technology, incorporating advanced features that will derive the highest performance from today's stepper motors. Its Anti-Resonance and Waveform Damping control algorithms make it a clear market leader. The "-S" models are step and... [See More]
- Communication: RS232; RS485
- AC Input: 120
- Motor / System: Microstepping Motor
- Phase : Single Phase
from Sanyo Denki America, Inc.
5-Phase stepping driver conforming to RS-485 serial communication. [See More]
- Communication: RS485
- DC Input: 5 to 24
- Motor / System: Full-Step; Half-Step
- Servo Feedback: Incremental Encoder
from Parker Hannifin / Automation / Electromechanical Division - Europe
Up to 8 axes of servo or stepper control. 150 MFLOPS, 32-bit floating-point DSP. Advanced Multitasking of up to 24 simultaneous programs. Interpolation of 8 axes in any combination. Up to 10 encoder inputs at 20 MHz. 10/100 Base-T Ethernet. Supports EtherNet/IP protocol. USB2.0. Absolute Encoder... [See More]
- Communication: CANopen; Ethernet; RS232; RS485; USB
- Axes: 2.0 to 8.0
- Resolution: 32
- AC Input: 120 to 240
from Performance Motion Devices
The Juno ® Family of ICs provides advanced velocity and torque control for brushless DC, DC brush, and step motors. Available as a single, one-axis IC, Juno ICs provide full four-quadrant motion control, direct quadrature encoder input, profile generation, field-oriented control (FOC), and much... [See More]
- Communication: CANbus; RS232; RS485
- Setup: Computer
- DC Input: 12 to 56
- Configuration: PCB Mount
from OMEGA Engineering, Inc.
The STM is a drive + motor + control unit, fusing step motor, drive, and controller technologies into a single device, offering savings on space, wiring and cost over conventional motor and drive solutions. The "S" models offer control options such as step and direction, analog input, joystick... [See More]
- Communication: RS232; RS485
- Motor / System: Microstepping Motor
- Product: Controller / Drive
- DC Input: 12 to 70
from Parker Hannifin / Automation / Electromechanical Division - Europe
1-8 axes of stepper/servo control (any combination). Outputs standard +/- 10V or step & direction. Servo update rates of 62.5 axis. Motion Planner Software provided 10 Mbps twisted pair Ethernet. TCP/IP and UDP protocol. 4-8 digital outputs [See More]
- Communication: DeviceNet; Foundation Fieldbus; PROFIBUS; RS232; RS485
- Resolution: 12
- Product: Controller / Drive; PC-Based
- PC-Based Bus: Other; Ethernet
from Performance Motion Devices
A programmable version of the standard ION ® 500 Digital Drive, the ION/CME 500 allows designers to download and run motion programs directly onto the ION 500 Digital Drive itself. This feature off-loads the host and allows for greater design flexibility with the distribution of motion programs... [See More]
- Communication: CANbus; Ethernet; RS232; RS485
- DC Input: 12 to 56
- Axes: 1.0
- Continuous Current: 9.8