RS232 Stepper Motor Drives
from ElectroCraft
Capable of powering PMDC, brushless and stepper motors (both open and closed loop) the PRO Series is a full programmable motion controller with unprecedented flexibility in a compact footprint. Now available with EtherCAT ® network!. Technology: Brushless Digital Servo Drive. Quadrants: 4. [See More]
- Communication: CANbus; RS232; EtherCAT
- DC Input: 90
- Axes: 1.0
- Power: 385
from PI (Physik Instrumente) L.P.
Integrated Driver for up to 2 Axes, EtherCAT Master for Synchronizing up to 4 Axes. ACS motion controller with integrated ACS driver module. Upgradable to up to 4 axes with the G-910.RC01 driver module. Directly compatible with positioners from PI. For AC servo motors / brushless DC motors, brushed... [See More]
- Communication: Ethernet; RS232
- Phase : Three Phase
- Axes: 2.0 to 4.0
- Power: 120 to 280
from Prior Scientific, Inc.
Controls as standard: - Stages: ES111 or ES107. - 2 Filter Wheels. - 3 Shutters. - 1 Focus Motor. Upgradeable for encoded focus. 2 x RS232 ports. High Speed USB connection with data transfer rates of up to 32 Kb/s. Smaller, space saving design with dimensions of 210mm x 85mm x 210mm deep. Upgraded... [See More]
- Communication: RS232; TTL; USB
- Setup: Computer
- Motor / System: Bipolar
- Configuration: Stand Alone
from Aerotech, Inc.
Design Features. Up to eight integrated drives in one stand-alone controller. Additional external drive axes can be added to provide up to ten axes of coordinated motion. Controller architecture capable of coordinating motion of up to five independent tasks. Capable of driving and controlling linear... [See More]
- Communication: Ethernet; RS232; USB
- Axes: 1.0 to 8.0
- Product: Controller / Drive
- Motor / System: Microstepping Motor
from Performance Motion Devices
The Juno ® Family of ICs provides advanced velocity and torque control for brushless DC, DC brush, and step motors. Available as a single, one-axis IC, Juno ICs provide full four-quadrant motion control, direct quadrature encoder input, profile generation, field-oriented control (FOC), and much... [See More]
- Communication: CANbus; RS232; RS485
- Setup: Computer
- DC Input: 12 to 56
- Configuration: PCB Mount
from Galil
The DMC-300xx Series is Galil's latest generation single-axis motion controller. It uses a 32-bit RISC processor to provide higher speed than older models. The DMC-300xx is available as a compact card-level or box-level unit and connects to a stepper or servo motor amplifier of any power range. Or,... [See More]
- Communication: Ethernet; RS232
- Axes: 1.0
- Resolution: 32
- Motor / System: Microstepping Motor
from OMEGA Engineering, Inc.
The STAC6 represents the latest developments in stepper drive technology, incorporating advanced features that will derive the highest performance from today's stepper motors. Its Anti-Resonance and Waveform Damping control algorithms make it a clear market leader. The "-S" models are step and... [See More]
- Communication: RS232; RS485
- AC Input: 120
- Motor / System: Microstepping Motor
- Phase : Single Phase
from Parker Hannifin / Automation / Electromechanical Division - Europe
ETHERNET Powerlink expands the ACR9000 family by adding real-time motion control over standard Ethernet. The high-speed digital communications network enhances machine performance and configuration possibilities while reducing set-up time and installation complexity. Control of 16 ETHERNET Powerlink... [See More]
- Communication: CANopen; Ethernet; RS232; RS485; USB
- Setup: Computer
- Axes: 8.0
- Operating Mode: Position
from Velmex, Inc.
The VXM is a high integration stepping motor controller for “plug and run ” with Velmex motor driven products. Reliable. performance is achieved with a powerful RISC Microcontroller that directly controls motor phase switching and all other. interface functions. The VXM uses an optimized... [See More]
- Communication: RS232; USB
- Axes: 1.0
- Product: Controller / Drive
- Motor / System: Unipolar; Hybrid; Half-Step
from Prior Scientific, Inc.
The ProScan ™ III Controller can control: - One ProScan stage and focus. - Four TTL input and outputs. - Supports Interactive Control Center (ICC). - 2 x RS232 ports. The compact and modular design of the ProScan ™ III system is capable of controlling up to 16 individual stepper motor... [See More]
- Communication: RS232; TTL; USB
- Motor / System: Bipolar
- Axes: 16.0
- Setup: Computer
from Aerotech, Inc.
Design Features. Network drives through a high-speed serial interface to coordinate up to ten axes of motion. Coordinate motion using up to five independent tasks. Drive and control linear or rotary brushless, DC brush servo, and micro-stepping motors. Command various motion types including:... [See More]
- Communication: Ethernet; RS232; USB
- Axes: 1.0
- Product: Controller / Drive
- Motor / System: Permanent Magnet; Hybrid; Microstepping Motor
from Performance Motion Devices
A programmable version of the standard ION ® 500 Digital Drive, the ION/CME 500 allows designers to download and run motion programs directly onto the ION 500 Digital Drive itself. This feature off-loads the host and allows for greater design flexibility with the distribution of motion programs... [See More]
- Communication: CANbus; Ethernet; RS232; RS485
- DC Input: 12 to 56
- Axes: 1.0
- Continuous Current: 9.8
from Galil
The SDM-206x0 contains four microstepping drives for operating two-phase bipolar stepper motors. [See More]
- Communication: Ethernet; RS232; TTL
- Axes: 2.0
- Product: Controller / Drive (optional feature)
- Motor / System: Unipolar; Bipolar; Permanent Magnet; Full-Step; Half-Step; Microstepping Motor
from OMEGA Engineering, Inc.
The STM is a drive + motor + control unit, fusing step motor, drive, and controller technologies into a single device, offering savings on space, wiring and cost over conventional motor and drive solutions. The "S" models offer control options such as step and direction, analog input, joystick... [See More]
- Communication: RS232; RS485
- Motor / System: Microstepping Motor
- Product: Controller / Drive
- DC Input: 12 to 70
from Parker Hannifin / Automation / Electromechanical Division - Europe
Up to 8 axes of servo or stepper control. 150 MFLOPS, 32-bit floating-point DSP. Advanced Multitasking of up to 24 simultaneous programs. Interpolation of 8 axes in any combination. Up to 10 encoder inputs at 20 MHz. 10/100 Base-T Ethernet. Supports EtherNet/IP protocol. USB2.0. Absolute Encoder... [See More]
- Communication: CANopen; Ethernet; RS232; RS485; USB
- Axes: 2.0 to 8.0
- Resolution: 32
- AC Input: 120 to 240
from Aerotech, Inc.
Design Features. Networkable with any Ensemble drive to control up to ten axes of piezo and/or servomotor stages. Multi-axis Position Synchronized Output (PSO) for real-time triggering of events. High-precision 20-bit sensor resolution for capacitive sensor feedback. Thermally-stable feedback... [See More]
- Communication: Ethernet; RS232; USB
- Resolution: 20
- Product: Controller / Drive
- Axes: 10.0
from Performance Motion Devices
ION ® 500 & ION 3000 Digital Drives are compact, fully enclosed modules that provide high-performance motion control, network connectivity and power amplification for Brushless DC, DC Brush, and step motors. Two power output levels are available, the ION 500 is rated at 500 Watts and the ION... [See More]
- Communication: CANbus; Ethernet; RS232; RS485
- DC Input: 20 to 195
- Axes: 1.0
- Continuous Current: 9.8
from OMEGA Engineering, Inc.
The ST-series performance stepper drives incorporate advanced features that will derive the highest performance from today's stepper motors. The Anti-Resonance and Waveform Damping control algorithms make this drive a clear market leader. The "-S" models are step and direction drives, compatible... [See More]
- Communication: RS232; RS485
- DC Input: 24 to 80
- Motor / System: Microstepping Motor
- Power: 50
from Parker Hannifin / Automation / Electromechanical Division - Europe
1-8 axes of stepper/servo control (any combination). Outputs standard +/- 10V or step & direction. Servo update rates of 62.5 axis. Motion Planner Software provided 10 Mbps twisted pair Ethernet. TCP/IP and UDP protocol. 4-8 digital outputs [See More]
- Communication: DeviceNet; Foundation Fieldbus; PROFIBUS; RS232; RS485
- Resolution: 12
- Product: Controller / Drive; PC-Based
- PC-Based Bus: Other; Ethernet
from Aerotech, Inc.
Design Features. Single-axis digital servo controller with integral power supply and amplifier. Advanced software architecture shortens customer development time; use C#, VB.Net, C, and LabVIEW?? combined with our full IDE and multitasking operating system. Host-mode operation allows you to send... [See More]
- Communication: Ethernet; RS232; USB
- Axes: 1.0
- Product: Controller / Drive
- Motor / System: Permanent Magnet; Hybrid; Microstepping Motor
from OMEGA Engineering, Inc.
The 1240i is a stand-alone programmable step motor driver suited for a wide range of motion control applications. It includes a sophisticated controller integrated with a 48-watt microstepping amplifier. The 1240i includes easy to use software for the rapid development of stand-alone motion control... [See More]
- Communication: RS232
- DC Input: 12 to 42
- Motor / System: Microstepping Motor
- Voltage: 5 to 24
from OMEGA Engineering, Inc.
The 3540i is a programmable step motor driver suitable for a wide range of motion control applications. It includes a sophisticated controller integrated with a 140 watt microstepping amplifier. The 3540i includes Applied Motion's easy to use Si Programmer ™ Windows software for the rapid... [See More]
- Communication: RS232
- DC Input: 12 to 42
- Motor / System: Microstepping Motor
- Voltage: 24