PC Board Stepper Motor Drives
from ElectroCraft
Capable of powering PMDC, brushless and stepper motors (both open and closed loop) the PRO Series is a full programmable motion controller with unprecedented flexibility in a compact footprint. Now available with EtherCAT ® network!. Technology: Brushless Digital Servo Drive. Quadrants: 4. [See More]
- Configuration: PC Board; Stand Alone
- DC Input: 90
- Axes: 1.0
- Power: 385
from FAULHABER MICROMO
Multiple inputs and outputs for encoder or external sensors. Built-in reference search modes. Minimal wiring requirements. Parametrization with “TMCL-IDE ” software and USB interface. Simple start-up [See More]
- Configuration: PC Board
- DC Input: 9 to 36
- Axes: 1.0
- Continuous Current: 1.1
from Sanyo Denki America, Inc.
5-Phase stepping driver, high speed type. [See More]
- Configuration: PC Board
- DC Input: 24
- Motor / System: Full-Step; Half-Step
- Operating Temperature: 0 to 50
from Simple Step LLC
Dual axis bipolar stepper controller for motors up to 1.5 amps per phase. (All products have no communications pre-installed and customers must now specify and purchase communications boards separately to make a complete system.). We Make Simple Motion Controllers. Over 15 years ago our founder had... [See More]
- Configuration: PC Board
- Axes: 2.0
- Resolution: 8
- Motor / System: Bipolar
from OMEGA Engineering, Inc.
The 1240i is a stand-alone programmable step motor driver suited for a wide range of motion control applications. It includes a sophisticated controller integrated with a 48-watt microstepping amplifier. The 1240i includes easy to use software for the rapid development of stand-alone motion control... [See More]
- Configuration: PC Board
- DC Input: 12 to 42
- Motor / System: Microstepping Motor
- Voltage: 5 to 24
from Critical Velocity Enterprises, LLC
The ST-1 Bipolar Stepper Motor Driver allows you to drive a bipolar or unipolar stepper motor of up to 2.5 Amps per phase in full, half, quarter or eighth step increments. The opto-isolated STEP and DIRECTION inputs allow simple interfacing to computers and microcontrollers. The motor current is... [See More]
- Configuration: PC Board
- DC Input: 8 to 26
- Motor / System: Bipolar; Microstepping Motor
- Power: 65
from Greenwich Instruments Ltd.
The GSM2 driver card is designed to drive a unipolar stepper motor (either with or without forcing resistors). Full, half or wave stepping modes are selectable, as is direction and speed can either be from an external or internal clock. An enable and disable input allow for a variety of start/stop... [See More]
- Configuration: PC Board
- Motor / System: Unipolar; Full-Step; Half-Step
- Axes: 1.0
- DC Input: 9 to 24
from Prior Scientific, Inc.
The Prior PCI II incorporates a 32 bit BUS that communicates at speeds of 133 MBps. This yields a communication response time of less than 250 nanoseconds - over 100 times faster than standard RS232 communications. The Prior PCI II controller is capable of driving the stage at step sizes as small as... [See More]
- Configuration: PC Board
- Resolution: 16
- Product: PC-Based
- PC-Based Bus: PCI
from Galil
The SDM-206x0 contains four microstepping drives for operating two-phase bipolar stepper motors. [See More]
- Configuration: PC Board; OEM; Stand Alone; Panel Mount; DIN Rail
- Axes: 2.0
- Product: Controller / Drive (optional feature)
- Motor / System: Unipolar; Bipolar; Permanent Magnet; Full-Step; Half-Step; Microstepping Motor
from Sanyo Denki America, Inc.
5-Phase stepping driver with micro-step function. [See More]
- Configuration: PC Board
- DC Input: 24
- Motor / System: Full-Step; Half-Step; Microstepping Motor
- Operating Temperature: 0 to 50
from Simple Step LLC
Dual axis bipolar stepper controller for motors up to 3.125 amps per phase. (All products have no communications or heat sinks pre-installed and customers must now specify and purchase communications boards and heat sinks separately to make a complete system. Heat sinks are not necessarily needed... [See More]
- Configuration: PC Board
- Axes: 2.0
- Resolution: 8
- Motor / System: Bipolar
from Critical Velocity Enterprises, LLC
This 3 Axis Stepper Driver Kit is designed for interfacing three bipolar stepper motors to a standard computer parallel port. This kit is compatible with Mach3 CNC control software. Kit includes three ST-1 Bipolar Stepper Motor Drivers, one Parallel Port Breakout Board, and one 24 VDC 6.5 Amp High... [See More]
- Configuration: PC Board
- DC Input: 8 to 26
- Motor / System: Microstepping Motor
- Power: 65