Tee Nut Nuts
from Magnus Mobility Systems, Inc.
If there's a device that needs to move, chances are Magnus can spec a solution to satisfy the need. If your primary concern is weight capacity, resistance to extreme conditions, durability, aesthetics, or any combination of these, Magnus offers a huge selection of existing models to meet that need. [See More]
- Type: Tee Nut
- Material: Steel
- Size: M8
- Finish: Zinc Plated
from TFC Ltd.
Material: Steel. Finish: Self Colour / Zinc & Clear. Dimensions: mm [See More]
- Type: Tee Nut
- Finish: Self Colour / Zinc & Clear
- Material: Steel
from Carr Lane Manufacturing Co.
Rotary T Nuts can be inserted from the top of a T slot, unlike normal T Nuts, which must be inserted from the end of the slot. This allows adding T Nuts and studs anywhere on the table without tearing down any existing setups. Made of alloy steel to provide maximum strength. [See More]
- Type: Tee Nut
- Material: Steel
- Size: 3/8" (optional feature); 1/2" (optional feature); 5/8" (optional feature); 3/4" (optional feature); M10 (optional feature); M12 (optional feature); M16 (optional feature)
- Finish: Black Oxide
from NBS Corp.
Featuring either 3 or 4 prongs, NBS ’ tee nuts all meet IFI specifications and are sourced only from ISO-9001 accredited manufacturers. Available from #6 through 3/8 ” diameter for both 3 and 4 prongs, all tee nuts come with zinc finish. [See More]
- Type: Tee Nut
- Finish: Zinc Plated
- Size: #10
from MS Aerospace, Inc.
M.S. Aerospace, proud to be the largest independent manufacturer of aerospace fasteners in the world. Since 1992, the mission of M.S. Aerospace has been very simple: To produce the finest high-strength, close tolerance, high-temperature aerospace bolts, studs, pins, screws and nuts while offering... [See More]
- Type: Tee Nut
from Te-Co, Inc.
Product Information. Black Oxide Finish. Case Hardened. 1018 Material. The last thread is incomplete on T-Slot Nuts to prevent the stud from turning through the bottom of the nut. Many sizes conform to TCMAI standards. Special sizes quoted upon request. Standard package quantity: 41401- 41419: 25... [See More]
- Type: Tee Nut; T-Slot Nut
- Material: Hardened Steel
- Size: M10
- Finish: Black Oxide
from Monroe Engineering
Hardened. Black Oxide finish. T nuts with suffix "N" conform to National Jig and Fixture Institute standards [See More]
- Type: Tee Nut
- Material: Hardened Steel
- Size: 5/16"
- Finish: Black Oxide
from Magnus Mobility Systems, Inc.
If there's a device that needs to move, chances are Magnus can spec a solution to satisfy the need. If your primary concern is weight capacity, resistance to extreme conditions, durability, aesthetics, or any combination of these, Magnus offers a huge selection of existing models to meet that need. [See More]
- Type: Tee Nut
- Material: Steel
- Size: M6
- Finish: Zinc Plated
from Carr Lane Manufacturing Co.
T Nuts are high-strength hardened nuts, fully machined to fit exactly in a specific machine-table T slot. Available in sizes for virtually any USA or metric machine-table slot, each with a choice of thread sizes. Also available in stainless steel. [See More]
- Type: Tee Nut
- Material: Steel (optional feature); Stainless Steel (optional feature)
- Size: 1/4" (optional feature); 5/16" (optional feature); 3/8" (optional feature); 1/2" (optional feature); 5/8" (optional feature); 3/4" (optional feature); 7/8" (optional feature); 1" (optional feature); M8 (optional feature); M10 (optional feature); M12 (optional feature); M16 (optional feature); M20 (optional feature)
- Finish: Black Oxide (optional feature)
from NBS Corp.
Featuring either 3 or 4 prongs, NBS ’ tee nuts all meet IFI specifications and are sourced only from ISO-9001 accredited manufacturers. Available from #6 through 3/8 ” diameter for both 3 and 4 prongs, all tee nuts come with zinc finish. [See More]
- Type: Tee Nut
- Finish: Zinc Plated
- Size: #10
from Te-Co, Inc.
Product Information. Sintered Metal. The last thread is incomplete on T-Slot Nuts to prevent the stud from turning through the bottom of the nut. Special sizes quoted upon request. *Quarter Turn T-Slot Nuts are undersized to fit machine table slot. [See More]
- Type: Tee Nut; T-Slot Nut
- Material: Sintered Metal
- Size: 1/2"
from Te-Co, Inc.
Product Information. 304 Stainless Steel. The last thread is incomplete on Stainless Steel T-Slot Nuts to prevent the stud from turning through the bottom of the nut. *Stainless Steel T-Slot Nuts are undersized to fit machine table slot. [See More]
- Type: Tee Nut
- Material: Stainless Steel
- Size: 1/2"