Self-Clinching Nut Nuts
from PennEngineering®
Tool only, flush mounted, no spring [See More]
- Type: Self-Clinching Nut
- Finish: Zinc Plated
- Size: M3
- Standards: ASME/ANSI
from bisco industries
Clinch Nuts [See More]
- Type: Self-Clinching Nut
- Size: #10; 0.190-24 (#10-24)
from PennEngineering®
Specifications -. Thread Size x Pitch - - M3 x 0.5. Type - - N10. Thread Code - - M3. Shank Code - - 1. A (Shank) Max. - - 0.97 mm. Min. Sheet Thickness - - 1 mm. Hole Size in Sheet + 0.08 - - 4.75 mm. C Max. - - 4.73 mm. E Nom. - - 7.11 mm. F ± 0.25 - - 3.30 mm. H Nom. - - 3.20 mm. T... [See More]
- Type: Self-Clinching Nut
- Finish: Zinc Plated
- Size: M3
- Standards: ASME/ANSI
from bisco industries
Clinch Nuts [See More]
- Type: Self-Clinching Nut
from PennEngineering®
Engineered to Eliminate Vibration Loosening. In high-vibration environments, traditional locking methods present compromises. Nylon inserts degrade, lock washers lose effectiveness, and thread adhesives need time-consuming application. As vibration cycles grow, these fastening solutions can... [See More]
- Type: Self-Clinching Nut; Locknut
- Material: Hardened Steel
- Size: #4; #6; #8; #10; 1/4"; 5/16"; M3; M4; M5; M6; M8
- Finish: Zinc Plated
from bisco industries
Clinch Nuts [See More]
- Type: Self-Clinching Nut
- Material: Steel
- Size: #10; 0.190-32 (#10-32)
from PennEngineering®
Features and Benefits: Ideal for flush applications where a thin stainless steel sheet requires load-bearing threads but still must remain smooth. Installs completely flush into thin stainless steel sheets up to HRB 88 / HB 183. Can be installed before bending sheet. [See More]
- Type: Self-Clinching Nut
- Material: Stainless Steel
- Size: #10
- Finish: Passivated and/or Tested per ASTM A380
from bisco industries
Clinch Nuts [See More]
- Type: Self-Clinching Nut
- Material: Steel
- Size: M3; M3 x 0.5
from PennEngineering®
Self-clinching nuts are installed by placing them in properly sized holes in sheets and applying a parallel squeezing force to the head of the nut. The sheet metal surrounding the head cold flows into an undercut thereby making the fastener an integral part of the sheet. A serrated clinching ring... [See More]
- Type: Self-Clinching Nut
- Material: Aluminum
- Size: M2
- Standards: ASME/ANSI
from bisco industries
Clinch Nuts [See More]
- Type: Self-Clinching Nut
- Material: Aluminum
- Size: #10; 0.190-24 (#10-24)
from PennEngineering®
Type SMPS self-clinching nuts are for installation into ultra-thin sheets. They feature a lower profile and can be mounted closer to the edge of a sheet than other self-clinching nuts. Installs into sheets as thin as 0.64 mm. Recommended for use in sheets HRB (Rockwell “B ” scale) 70 or... [See More]
- Type: Self-Clinching Nut
- Material: Stainless Steel
- Size: M2.5
from bisco industries
Clinch Nuts [See More]
- Type: Self-Clinching Nut
from bisco industries
Clinch Nuts [See More]
- Type: Self-Clinching Nut
- Size: #10; 0.190-32 (#10-32)
from bisco industries
Clinch Nuts [See More]
- Type: Self-Clinching Nut
from bisco industries
Clinch Nuts [See More]
- Type: Self-Clinching Nut
- Material: Stainless Steel
- Size: #10; 0.190-32 (#10-32)
from bisco industries
Clinch Nuts [See More]
- Type: Self-Clinching Nut
- Material: Steel
- Size: 3/8"; 0.375-16 (3/8-16)
from bisco industries
Clinch Nuts [See More]
- Type: Self-Clinching Nut
- Size: #10; 0.190-24 (#10-24)
from bisco industries
Clinch Nuts [See More]
- Type: Self-Clinching Nut
- Material: Steel
- Size: #10; 0.190-32 (#10-32)
from bisco industries
Clinch Nuts [See More]
- Type: Self-Clinching Nut
- Material: Steel
- Size: M20.5 x 0.45
from bisco industries
Clinch Nuts [See More]
- Type: Self-Clinching Nut
- Material: Steel
- Size: #10; 0.190-32 (#10-32)
from bisco industries
Clinch Nuts [See More]
- Type: Self-Clinching Nut
- Material: Aluminum
- Size: #4; #4-40
from bisco industries
Clinch Nuts [See More]
- Type: Self-Clinching Nut
- Material: Aluminum
- Size: M3; M3 x 0.5
from bisco industries
Clinch Nuts [See More]
- Type: Self-Clinching Nut
- Material: Steel
- Size: #4; 0.112-40 (#4-40)
from bisco industries
Clinch Nuts [See More]
- Type: Self-Clinching Nut
- Material: Steel
- Size: M3; M3 x 0.5
from bisco industries
Clinch Nuts [See More]
- Type: Self-Clinching Nut
- Material: Stainless Steel
- Size: #2; 0.086-56 (#2-56)
from bisco industries
Clinch Nuts [See More]
- Type: Self-Clinching Nut
- Material: Stainless Steel
- Size: #2; 0.086-56 (#2-56)
from MS Aerospace, Inc.
M.S. Aerospace, proud to be the largest independent manufacturer of aerospace fasteners in the world. Since 1992, the mission of M.S. Aerospace has been very simple: To produce the finest high-strength, close tolerance, high-temperature aerospace bolts, studs, pins, screws and nuts while offering... [See More]
- Type: Self-Clinching Nut; Locknut; Distorted-Thread Locknut; Interfering Threadnuts
from Stanley Engineered Fastening - Spiralock
These standoffs are flare-mounted for applications requiring greater pullout performance. They satisfy component-to-board, board-to-board and board-to-chassis production fastening needs and can be used with all types of printed circuit boards, as well as acrylic, polycarbonate and aluminum panels. [See More]
- Type: Self-Clinching Nut; Standoff
- Material: Aluminum (optional feature); Steel (optional feature); Stainless Steel (optional feature)
- Size: #4
- Thread Direction: Right Hand
from TFC Ltd.
SCFB & SCFBS blind, sealed-thread, press nuts are designed to provide extended thread lengths in thin sheet metal. Blind nuts also provide a seal against the intrusion of dirts, oils, moisture and corrosive environments. Materials: SCFB - Heat-treated Carbon Steel. SCFBS - 300 Series Stainless... [See More]
- Type: Self-Clinching Nut
- Finish: Zinc Plated
- Material: Steel
from PENCOM
Custom sizes available [See More]
- Type: Round Nut; Self-Clinching Nut
- Material: Steel (optional feature); Stainless Steel (optional feature)
- Size: #2
- Finish: Zinc Plated (optional feature); Passivate
from J.Lanfranco Fastener Systems Inc.
All metal self-locking riveting nut, with locking slot. [See More]
- Type: Self-Clinching Nut; Locknut; Other; Slotted Locknut
- Material: Stainless Steel
- Size: M4
- Finish: Anti-Galling Coating; Self-Color, Pass., Anti-Galling, Geomet
from TFC Ltd.
SCFL Self-clinching Nuts provide strong load-bearing threads whilst fitting flush into the material. Material: 300 Series Stainless Steel. Finish: Passivated (ASTM A380). Thread: 6H ISO Metric IMperial Class 2B, MIL-S-7742. Use in: Materials with Rockwell Hardness B-70 or less [See More]
- Type: Self-Clinching Nut
- Finish: Passivated (ASTM A380)
- Material: Stainless Steel
from TFC Ltd.
SCFAS & SCFAC floating clinch nuts provide a Self-clinching fastener with a floating nut that compensates for mating misalignments up to 0.8mm (.030in.). Material: SCFAS - Carbon steel, heat treated. SCFAC - 300 Series Stainless steel. Finish: SCFAS - Zinc (ASTM B633-85) Clear. SCFAC - Passivated... [See More]
- Type: Self-Clinching Nut
- Finish: Zinc Plated
- Material: Steel; Stainless Steel
from TFC Ltd.
Type SC & SCS nuts provide strong load-bearing threads in sheet metal and other thin section assemblies. Material: SC - Carbon steel, heat-treated. SCS - 300 Series Stainless Steel. Finish: SC - Zinc, spec. ASTMB 633-85. SCS - Passivated (QQ-P-35). Thread: Imperial Class 2B-MIL-S-7742. Use in: SC -... [See More]
- Type: Self-Clinching Nut
- Finish: Zinc Plated
- Material: Steel; Stainless Steel
from TFC Ltd.
Type SC & SCS nuts provide strong load-bearing threads in sheet metal and other thin section assemblies. Material: SC - Carbon steel, Heat-treated. SCS - 300 Series Stainless Steel. Finish: SC - Materials of Rockwell Hardness B-80 maximum. Thread: 6H ISO Metric. Use in: SC - Materials of Rockwell... [See More]
- Type: Self-Clinching Nut
- Finish: SC - Materials of Rockwell Hardness B-80 maximum
- Material: Steel; Stainless Steel
from TFC Ltd.
Type SCA nuts provide strong load-bearing threads in sheet metal and other thin section assemblies. Material: 2024 - T4 Aluminium. Finish: 6H ISO metric Imperial Class 2B-MIL-S-7742. Use in: Materials of Rockwell Hardness B-50 or less [See More]
- Type: Self-Clinching Nut
- Finish: 6H ISO metric Imperial Class 2B-MIL-S-7742
- Material: Aluminum
from TFC Ltd.
SCFSP Self-clinching Nuts specifically designed for use in stainless steel sheets as thin as 0.8mm (.030in.). Material: Precipitation-hardened Stainless steel. Finish: Passivated ASTM A380. Thread: 6H ISO metric Imperial Class 2B, MIL-S-7742. Use in: Materials with Rockwell Hardness B-88 or less [See More]
- Type: Self-Clinching Nut
- Finish: Passivated ASTM A380
- Material: Stainless Steel