7/8" Nuts
from Jergens, Inc.
Where heavy clamping pressures and vibrations could cause trouble, the wide face surface of Jergens Flange Nuts holds through with greater friction. Features, Benefits, & Product Specifications: Material: Low Carbon Steel. Finish: Black Oxide. Heat Treat: Case Hardened. Thread: 2B-UNC [See More]
- Size: 7/8"; 7/8-9
- Material: Steel; Low Carbon Steel
- Type: Flange Nut
- Finish: Black Oxide; Black Oxide
from National Bolt & Nut Corporation
ALL METAL LOCK NUTS. Dimensions per IFI-100/107. Crowned top. Nylon inserts and Nuts with patches also available as an option on the Request for Information form. Other materials and finishes available. For further information, call or send an information request. In conjunction with our selection... [See More]
- Size: 1/4"; 5/16"; 3/8"; 7/16"; 1/2"; 5/8"; 3/4"; 7/8"; 1"; 1 1/8"; 1 1/4"; 1 3/8"; 1 1/2"; 1 3/4"; 2"
- Material: Steel
- Type: Hex Nut; Nylon Insert Nut (optional feature); Locknut; Other (optional feature); Optional Nylon Inserts and Patches
- Finish: Zinc Plated; Zinc Chromate; Cadmium & Wax
from RS Components, Ltd.
7/8-9 A194 Grade 2H Heavy Hex Nut Hot Di [See More]
- Size: 7/8"
- Material: Steel; Steel
- Type: Hex Nut
from Jergens, Inc.
Jergens Jam Nuts are used to tighten or "jam" against another nut to lock the two into place. This tightening resists loosening due to vibration. Features, Benefits, & Product Specifications: Material: C1018 Low Carbon Steel. Finish: Zinc [See More]
- Size: 7/8"; 7/8-14
- Material: Steel; C1018 Low Carbon Steel
- Type: Locknut; Jam Nut
- Finish: Zinc
from National Bolt & Nut Corporation
COUPLING NUTS. Regular width across flats. Commonly used with Threaded Rod. Nylon inserts and Nuts with patches also available as an option on the information request form. Other materials and finishes available. For further information, call or send an information request. In conjunction with our... [See More]
- Size: 1/4"; 5/16"; 3/8"; 7/16"; 1/2"; 5/8"; 3/4"; 7/8"; 1"; 1 1/4"; 1 1/2"
- Material: Steel
- Type: Coupling Nut; Nylon Insert Nut (optional feature); Locknut (optional feature); Other (optional feature); Optional Nylon Inserts and Patches
- Finish: Zinc Plated
from RS Components, Ltd.
7/8-9 Heavy Hex Nut Hot Dip Galvanized [See More]
- Size: 7/8"
- Material: Steel; Steel
- Type: Hex Nut
from Jergens, Inc.
Jergens T-Slot Nuts provides a safety-stop feature to prevent turning studs into tableways. Features, Benefits, & Product Specifications: Material: Available in C-1018 Low Carbon Steel and 303 Stainless Steel. Finish: Black Oxide (for Low Carbon Steel T-Slot Nuts). Threads: 2B-UNC (Inch); Class... [See More]
- Size: 7/8"; 7/8-9
- Finish: Black Oxide; Black Oxide (for Low Carbon Steel T-Slot Nuts)
- Material: Steel; Stainless Steel; Available in C-1018 Low Carbon Steel and 303 Stainless Steel
from National Bolt & Nut Corporation
HEAVY HEX JAM NUTS. Dimensions per ANSI B18.2.2. Nylon inserts and Nuts with patches also available as an option on the Request for Information form. Other materials and finishes available. For further information, call or send an information request. In conjunction with our selection of bolts and... [See More]
- Size: 1/4"; 5/16"; 3/8"; 7/16"; 1/2"; 5/8"; 3/4"; 7/8"; 1"; 1 1/8"; 1 1/4"; 1 3/8"; 1 1/2"; 1 3/4"; 2"; 2 1/4"; 2 1/2"; 2 3/4"; Size Range: 1/4" - 3-1/2", Fine and Course Threads
- Material: Steel
- Type: Hex Nut; Nylon Insert Nut (optional feature); Locknut; Jam Nut; Other (optional feature); Optional Nylon Inserts and Patches
- Finish: Pain
from RS Components, Ltd.
7/8-14 Finished Hex Nut Zinc [See More]
- Size: 7/8"
- Material: Steel; Steel
- Type: Hex Nut
from National Bolt & Nut Corporation
HEAVY HEX NUTS. As part of our premium line of hex nut products, National Bolt & Nut offers a wide range of heavy hex nuts in various grades, finishes, threads, and sizes to meet your unique application requirements. Meeting ANSI B18.2.2 dimensional requirements, heavy hex nuts are popular for... [See More]
- Size: 1/4"; 5/16"; 3/8"; 7/16"; 1/2"; 5/8"; 3/4"; 7/8"; 1"; 1 1/8"; 1 1/4"; 1 3/8"; 1 1/2"; 1 3/4"; 2"; 2 1/4"; 2 1/2"; 2 3/4"; Size Range: 1/4" - 5", Fine and Course Threads
- Material: Steel
- Type: Hex Nut; Nylon Insert Nut (optional feature); Locknut (optional feature); Other (optional feature); Optional Nylon Inserts and Patches
- Finish: Zinc Plated; Plain
from RS Components, Ltd.
7/8-14 Finished Hex Nut Grade 5 Zinc [See More]
- Size: 7/8"
- Material: Steel; Steel
- Type: Hex Nut
from National Bolt & Nut Corporation
HEAVY HEX SLOTTED NUTS. Dimensions per ANSI B18.2.2. Nylon inserts and Nuts with patches also available as an option on the Request for Information form. Other materials and finishes available. For further information, call or send an information request. In conjunction with our selection of bolts... [See More]
- Size: 1/2"; 5/8"; 3/4"; 7/8"; 1"; 1 1/8"; 1 1/4"; 1 3/8"; 1 1/2"; 1 3/4"; 2"; 2 1/4"; 2 1/2"; 2 3/4"; Size Range: 1/4" - 5", Fine and Course Threads
- Material: Steel
- Type: Castle Nut; Hex Nut; Nylon Insert Nut (optional feature); Locknut; Other (optional feature); Optional Nylon Inserts and Patches
- Finish: Plain
from RS Components, Ltd.
7/8-14 Grade 8 Finished Hex Nut Zinc Yel [See More]
- Size: 7/8"
- Material: Steel; Steel
- Type: Hex Nut
from National Bolt & Nut Corporation
HEAVY SQUARE NUTS. Dimensions per ANSI B18.2.2. Nylon inserts and Nuts with patches also available as an option on the Request for Information form. Other materials and finishes available. For further information, call or send an information request. In conjunction with our selection of bolts and... [See More]
- Size: 1/4"; 5/16"; 3/8"; 1/2"; 5/8"; 3/4"; 7/8"; 1"; 1 1/8"; 1 1/4"
- Material: Steel
- Type: Nylon Insert Nut (optional feature); Square Nut; Locknut (optional feature); Other (optional feature); Optional Nylon Inserts and Patches
- Finish: Plain
from RS Components, Ltd.
7/8-9 Finished Hex Nut Zinc [See More]
- Size: 7/8"
- Material: Steel; Steel
- Type: Hex Nut
from G.L. Huyett
Coupling nuts are sometimes known as extension nuts. These fully threaded nuts are used with threaded rod in a variety of applications; from leveling, to spacing, to joining two or more studs. [See More]
- Size: #4; #6; #8; #10; 1/4"; 5/16"; 3/8"; 7/16"; 1/2"; 5/8"; 3/4"; 7/8"; 1"; 1 1/8"; 1 1/4"; 1 3/8"; 1 1/2"; 1 3/4"; 2"; 2 1/4"; 2 1/2"; 2 3/4"; 9/16"
- Material: Bronze (optional feature); Stainless Steel (optional feature); Carbon Steel
- Type: Coupling Nut
- Finish: Zinc Clear
from Monroe Engineering
Hardened Black Oxide Finish [See More]
- Size: 7/8"
- Material: Hardened Steel
- Type: Hex Nut; Locknut; Jam Nut
- Finish: Black Oxide
from Stanley Engineered Fastening - Spiralock
Standard Spiralock nuts are SAE Grade 8 equivalent, and designed to mate with standard 2A and 3A class of fit bolts. Spiralock nuts dimensionally conform to IFI standards. Our standard plating is clear zinc chromate. Other nut styles, platings and materials are available upon request. [See More]
- Size: 7/8"
- Material: Steel; Stainless Steel (optional feature); Other Materials Available Upon Request
- Type: Flange Nut; Hex Nut
- Finish: Zinc Chromate; Other Plating Available Upon Request
from Te-Co, Inc.
Product Information. Black Oxide Finish. Case Hardened. 1117 Material. Coupling Nuts can be used to join two or more studs for a desired length. Many sizes conform to TCMAI standards. Standard package quantity 41501-41507: 25 pcs. [See More]
- Size: 7/8"
- Material: Hardened Steel
- Type: Coupling Nut
- Finish: Black Oxide
from Atkore International
JAM TYPE. 7/8 INCH NOMINAL DIAMETER. UNC-2 THREAD SERIES. 7/8 NOMINAL DIAMETER - FRACTIONAL. .875 NOMINAL DIAMETER - DECIMAL. POWER-STRUT[R] BRAND. FINISH/COATING ELECTROGALVANIZED. NOMINAL DIAMETER - DECIMAL - UOM IN. PS83 MODEL [See More]
- Size: 7/8"
- Finish: Galvanized
- Type: Hex Nut
from Bayou City Bolt & Supply Co., Inc.
A nut is a type of fastener with a threaded hole. Nuts are almost always used opposite a mating bolt to fasten parts together. The two components work together by a combination of friction between the threads, a slight stretch of the bolt, and compression of the mating parts. Nuts are graded with... [See More]
- Size: 1/4"; 5/16"; 3/8"; 7/16"; 1/2"; 5/8"; 3/4"; 7/8"; 1"; 1 1/8"; 1 1/4"; 1 3/8"; 1 1/2"; 1 3/4"; 2"; 2 1/4"; 2 1/2"; 2 3/4"
- Material: Steel (optional feature); Stainless Steel (optional feature); Plastic (optional feature); Nylon (optional feature); Alloy Steel
- Type: Hex Nut
- Standards: ASME/ANSI (optional feature); SAE (optional feature); ASTM
from Reid Supply
Reid has a large selection of industrial nuts for all of your fastening needs. Reid offers everything from tooling, allen, button thread, Jam, standard hex, thumb and flange nuts to industrial T-slot and machine screw nuts. Reid offers both imperial and metric nuts in a wide variety of materials... [See More]
- Size: 7/8"
- Material: Case Hardened Steel
- Type: Locknut; Jam Nut
from PHD Manufacturing, Inc.
WITHOUT SPRING TYPE. LOW CARBON STEEL MATERIAL. 7/8 INCH NOMINAL DIAMETER. 1/2 INCH THICKNESS. 7/8 NOMINAL DIAMETER - FRACTIONAL. .875 NOMINAL DIAMETER - DECIMAL. 1/2 THICKNESS - FRACTIONAL. .5 THICKNESS - DECIMAL. WEIGHT 0.13 LB. STANDARDS AND SPECIFICATIONS FINISH ASTM B633 SC1. FINISH/COATING... [See More]
- Size: 7/8"
- Material: Steel
- Type: Channel Nut
- Finish: Galvanized
from NBS Corp.
Adaptable and dependable, NBS ’ finished hex nuts can be used in thousands of different applications. Available from ¼ ” through 1 ” (inch) and M3 through M24 (metric) internal diameter, all finished hex nuts meet IFI specifications and are only sourced from ISO-9001... [See More]
- Size: 7/8"
- Material: Steel
- Type: Hex Nut
- Finish: Zinc Plated
from Fastener SuperStore, Inc.
7/8-9 Acorn Nuts / Low Crown / Closed End / Steel / Nickel. Steel: The low-crown cap nut is usually manufactured in two pieces, a hex nut and an acorn-shaped top, zinc die cast to form the finished part. Stainless: Similar in design to the steel nut but made from an austenitic stainless alloy. Nuts... [See More]
- Size: 7/8"
- Material: Steel
- Type: Acorn Nut
- Finish: Nickel Plated
from Ebinger Manufacturing Corp.
1-7/16 INCH WIDTH ACROSS FLAT. 7/8 INCH NOMINAL DIAMETER. 9 TPI. 55/64 INCH THICKNESS. 7/8 NOMINAL DIAMETER - FRACTIONAL. .875 NOMINAL DIAMETER - DECIMAL. 55/64 THICKNESS - FRACTIONAL. .8593 THICKNESS - DECIMAL. PACKAGING QUANTITY 25 PIECES PER PLASTIC BOX. FINISH/COATING ZINC PLATED. NOMINAL... [See More]
- Size: 7/8"
- Finish: Zinc Plated
- Type: Hex Nut
from Peco Fasteners, Inc.
STRAIGHT TYPE. 7/8 INCH NOMINAL DIAMETER. 9 TPI. 7/8 NOMINAL DIAMETER - FRACTIONAL. .875 NOMINAL DIAMETER - DECIMAL. PACKAGING QUANTITY 10 PIECES. FINISH/COATING ZINC PLATED. NOMINAL DIAMETER - DECIMAL - UOM IN [See More]
- Size: 7/8"
- Finish: Zinc Plated
- Type: Coupling Nut
from J.Lanfranco Fastener Systems Inc.
The ESL's two self-locking slots make it ideal in any application subjected to high vibration, shock, impact, heavy loads, and high temperatures. The ESL provides unparalleled locking ability without seizing up upon removal. [See More]
- Size: 7/8"
- Material: Bronze (optional feature); Brass (optional feature); Exotic Metals (optional feature); Steel (optional feature); Hardened Steel (optional feature); Stainless Steel (optional feature); Titanium (optional feature); Light Alloy
- Type: Hex Nut; Locknut; Other; Slotted Locknut
- Finish: Anti-Galling Coating (optional feature); Phosphate (optional feature); Galvanized (optional feature); Nickel Plated (optional feature); Zinc Plated (optional feature); Zinc Chromate (optional feature); Self-Color, Pass., Anti-Galling, Geomet
from G.L. Huyett
Hex nuts are six-sided, hexagon shaped metal fasteners that have a threaded hole in the center used to secure a bolt or machine screw. Available in a variety of grades and finishes, they are frequently used in construction and automotive applications. [See More]
- Size: #6; #8; #10; 1/4"; 5/16"; 3/8"; 7/16"; 1/2"; 5/8"; 3/4"; 7/8"; 1 1/8"; M4; M5; M6; M8; M10; M12
- Material: Stainless Steel (optional feature); Carbon Steel
- Type: Hex Nut
- Finish: Zinc Clear
from Monroe Engineering
Type NS nuts are used with bottom half of spherical washers. Hardened. Black Oxide finish [See More]
- Size: 7/8"
- Material: Hardened Steel
- Type: Hex Nut; Collar Nuts
- Finish: Black Oxide
from Te-Co, Inc.
Product Information. Black Oxide Finish. Case Hardened. High Grade Alloy Steel. Will outlast ordinary Hex Jam Nuts when used in repetitive operations. Standard package quantity: 25 pcs. [See More]
- Size: 7/8"
- Material: Hardened Steel
- Type: Hex Nut; Locknut; Jam Nut
- Finish: Black Oxide
from Reid Supply
Reid has a large selection of industrial nuts for all of your fastening needs. Reid offers everything from tooling, allen, button thread, Jam, standard hex, thumb and flange nuts to industrial T-slot and machine screw nuts. Reid offers both imperial and metric nuts in a wide variety of materials... [See More]
- Size: 7/8"
- Material: Steel; Case-Hardened Steel
- Type: Locknut; Jam Nut
from PHD Manufacturing, Inc.
WITH SPRING TYPE. LOW CARBON STEEL MATERIAL. 7/8 INCH NOMINAL DIAMETER. 1/2 INCH THICKNESS. 7/8 NOMINAL DIAMETER - FRACTIONAL. .875 NOMINAL DIAMETER - DECIMAL. 1/2 THICKNESS - FRACTIONAL. .5 THICKNESS - DECIMAL. WEIGHT 0.15 LB. STANDARDS AND SPECIFICATIONS FINISH ASTM B633 SC1. FINISH/COATING... [See More]
- Size: 7/8"
- Material: Steel
- Type: Channel Nut
- Finish: Galvanized
from NBS Corp.
Featuring a white nylon insert and available in both normal and thin pattern, NBS ’ nylon insert lock nuts are the ideal general purpose locking nut. Available from ¼ ” through 1 ” (inch) and M3 through M16 (metric) internal diameter, all nylon insert lock nuts meet IFI... [See More]
- Size: 7/8"
- Material: Steel
- Type: Locknut
- Finish: Zinc Plated
from Peco Fasteners, Inc.
7/8 INCH NOMINAL DIAMETER. 14 TPI. SAE APPLICABLE STANDARD. 7/8 NOMINAL DIAMETER - FRACTIONAL. .875 NOMINAL DIAMETER - DECIMAL. PACKAGING QUANTITY 25 PIECES. FINISH/COATING ZINC PLATED. NOMINAL DIAMETER - DECIMAL - UOM IN [See More]
- Size: 7/8"
- Finish: Zinc Plated
- Type: Hex Nut
from Te-Co, Inc.
Product Information. Black Oxide Finish. High Grade Alloy Steel. Will outlast ordinary Hex Nuts when used in repetitive operations. Standard package quantity: 25 pcs. [See More]
- Size: 7/8"
- Material: Steel
- Type: Hex Nut
- Finish: Black Oxide
from Reid Supply
Reid has a large selection of industrial nuts for all of your fastening needs. Reid offers everything from tooling, allen, button thread, Jam, standard hex, thumb and flange nuts to industrial T-slot and machine screw nuts. Reid offers both imperial and metric nuts in a wide variety of materials... [See More]
- Size: 7/8"
- Material: Case Hardened Steel
- Type: Locknut; Jam Nut
from PHD Manufacturing, Inc.
STRAIGHT TYPE. LOW CARBON STEEL MATERIAL. 1-1/4 INCH WIDTH ACROSS FLAT. 7/8 INCH NOMINAL DIAMETER. 7/8 NOMINAL DIAMETER - FRACTIONAL. .875 NOMINAL DIAMETER - DECIMAL. LOAD RATING 3770 LB. WEIGHT 0.55 LB. FINISH/COATING PLAIN/ELECTROGALVANIZED. NOMINAL DIAMETER - DECIMAL - UOM IN. THICKNESS 2-1/2... [See More]
- Size: 7/8"
- Material: Steel
- Type: Coupling Nut
- Finish: Galvanized; Plain
from Peco Fasteners, Inc.
7/8 INCH NOMINAL DIAMETER. 9 TPI. USS APPLICABLE STANDARD. 7/8 NOMINAL DIAMETER - FRACTIONAL. .875 NOMINAL DIAMETER - DECIMAL. PACKAGING QUANTITY 25 PIECES. FINISH/COATING ZINC PLATED. NOMINAL DIAMETER - DECIMAL - UOM IN [See More]
- Size: 7/8"
- Finish: Zinc Plated
- Type: Hex Nut
from Te-Co, Inc.
Product Information. Assemblies consist of Flange Nuts (Part No.'s 41801-41811) and Spherical Washers (Part No.'s 42741-42750). For material information, see individual components [See More]
- Size: 7/8"
- Material: Hardened Steel
- Type: Flange Nut
- Finish: Black Oxide
from Reid Supply
These check nuts are made of 303 stainless steel or low carbon steel, soft, with a black oxide finish. They can be used in conjunction with many other components such as knurled head screws, torque thumb screws, hand knob assemblies, toggle show clamp assemblies and many other tooling applications. [See More]
- Size: 7/8"
- Material: Steel; Cold-Finished/Case-Hardened Steel
- Type: Coupling Nut
- Finish: Black Oxide; Black Oxide
from PHD Manufacturing, Inc.
LOW CARBON STEEL MATERIAL. 7/8 INCH NOMINAL DIAMETER. 7/8 NOMINAL DIAMETER - FRACTIONAL. .875 NOMINAL DIAMETER - DECIMAL. STANDARD NUT. WEIGHT 0.19 LB. FINISH/COATING PLAIN. NOMINAL DIAMETER - DECIMAL - UOM IN. 110 MODEL [See More]
- Size: 7/8"
- Material: Steel
- Type: Hex Nut
- Finish: Plain
from Peco Fasteners, Inc.
7/8 INCH NOMINAL DIAMETER. 9 TPI. 7/8 NOMINAL DIAMETER - FRACTIONAL. .875 NOMINAL DIAMETER - DECIMAL. PACKAGING QUANTITY 25 PIECES. FINISH/COATING ZINC PLATED. NOMINAL DIAMETER - DECIMAL - UOM IN [See More]
- Size: 7/8"
- Finish: Zinc Plated
- Type: Hex Nut
from Te-Co, Inc.
Product Information. Black Oxide Finish. Case Hardened. 12L14 Material. Many sizes conform to TCMAI standards. When used with Spherical Washers, Flange Nuts will equalize thread loads. Standard package quantity: 41801-41807: 25 pcs. [See More]
- Size: 7/8"
- Material: Hardened Steel
- Type: Flange Nut
- Finish: Black Oxide
from Reid Supply
Reid has a large selection of industrial nuts for all of your fastening needs. Reid offers everything from tooling, allen, button thread, Jam, standard hex, thumb and flange nuts to industrial T-slot and machine screw nuts. Reid offers both imperial and metric nuts in a wide variety of materials... [See More]
- Size: 7/8"
- Material: Steel; Steel
- Type: Hex Nut
from Peco Fasteners, Inc.
JAM TYPE. 7/8 INCH NOMINAL DIAMETER. SAE APPLICABLE STANDARD. 7/8 NOMINAL DIAMETER - FRACTIONAL. .875 NOMINAL DIAMETER - DECIMAL. PACKAGING QUANTITY 25 PIECES. FINISH/COATING ZINC PLATED. NOMINAL DIAMETER - DECIMAL - UOM IN [See More]
- Size: 7/8"
- Finish: Zinc Plated
- Type: Hex Nut
from Te-Co, Inc.
Product Information. 303 Stainless Steel. Special sizes quoted upon request [See More]
- Size: 7/8"
- Material: Stainless Steel
- Type: Flange Nut
from Reid Supply
These check nuts are made of 303 stainless steel or low carbon steel, soft, with a black oxide finish. They can be used in conjunction with many other components such as knurled head screws, torque thumb screws, hand knob assemblies, toggle show clamp assemblies and many other tooling applications. [See More]
- Size: 7/8"
- Finish: Black Oxide; Black Oxide
- Material: Steel; Cold-Finished/Case-Hardened Steel
from Peco Fasteners, Inc.
JAM TYPE. 7/8 INCH NOMINAL DIAMETER. USS APPLICABLE STANDARD. 7/8 NOMINAL DIAMETER - FRACTIONAL. .875 NOMINAL DIAMETER - DECIMAL. PACKAGING QUANTITY 25 PIECES. FINISH/COATING ZINC PLATED. NOMINAL DIAMETER - DECIMAL - UOM IN [See More]
- Size: 7/8"
- Finish: Zinc Plated
- Type: Hex Nut