English Gearmotors
from ElectroCraft
Exquisitely efficient small form factor BLDC motor that has peak operating efficiency at traditional RPM ranges, allowing custom integration with a planetary gearbox. High torque from a small form factor, with low power consumption and peak performance at lower RPM for quiet operation. Traditional... [See More]
- Units: English
- Commutation: Brushless
- Motor Type: DC Motor
- Standard DC Voltage: 12V; 24V; 48V
from DigiKey
GEARMOTOR 230 RPM 6VDC [See More]
- Units: English
- Commutation: Brush
- Motor Type: DC Motor
- DC Voltage Range: 6.0
from ElectroCraft
Exquisitely efficient small form factor BLDC motor that has peak operating efficiency at traditional RPM ranges, allowing custom integration with a planetary gearbox. High torque from a small form factor, with low power consumption and peak performance at lower RPM for quiet operation. Traditional... [See More]
- Units: English
- Commutation: Brushless
- Motor Type: DC Motor
- Standard DC Voltage: 12V; 24V; 48V
from DigiKey
DC GEAR MOTOR - 430RPM (3-6V) [See More]
- Units: English
- Commutation: Brush
- Motor Type: DC Motor
- DC Voltage Range: 3.0 to 6.0
from ElectroCraft
Exquisitely efficient small form factor BLDC motor that has peak operating efficiency at low RPM allowing custom integration with planetary gearbox. High torque from a small form factor, with low power consumption and peak performance at low RPM for quiet operation. Traditional BLDC motors have peak... [See More]
- Units: English
- Commutation: Brushless
- Motor Type: DC Motor
- Standard DC Voltage: 12V; 24V; 48V
from DigiKey
Brushed DC Motor Gearmotor 200 RPM 3 ~ 6VDC [See More]
- Units: English
- Commutation: Brush
- Motor Type: DC Motor
- DC Voltage Range: 3.0 to 6.0
from ElectroCraft
The Synchron model 148-5 is a permanent magnet DC motor mounted on our Synchron C mount gearbox. Hundreds of gear ratios are available ranging from 1.3:1 up to 6,000,000:1 with a maximum torque rating on most gearheads of 30 oz-in. For overload torque protection the gearheads may be selected with... [See More]
- Units: English
- Commutation: Brush
- Motor Type: DC Motor
- DC Construction: Permanent Magnet
from DigiKey
DC Motor Gearmotor 120 RPM 3 ~ 6VDC [See More]
- Units: English
- DC Voltage Range: 3.0 to 6.0
- Motor Type: DC Motor
- Gearbox Ratio: 90
from ElectroCraft
The Synchron model 148-6 is a permanent magnet DC motor mounted to our round Synchron gearbox. Dozens of gear ratios are available ranging from 1.3:1 up to 720:1 with a maximum torque rating on most gearheads of 30 oz-in. For overload torque protection the gearheads may be selected with two-way slip... [See More]
- Units: English
- Commutation: Brush
- Motor Type: DC Motor
- DC Construction: Permanent Magnet
from DigiKey
DC Motor Gearmotor 120 RPM 3 ~ 6VDC [See More]
- Units: English
- DC Voltage Range: 3.0 to 6.0
- Motor Type: DC Motor
- Gearbox Ratio: 90
from ElectroCraft
ElectroCraft's MP24 integrates a 4-pole Brushless DC motor with a 2-stage right-angle worm gearbox, designed for industrial applications, adding industrial grade cabling plus encoder feedback options to support positioning capability. The MP24 combines optimum performance with increased efficiency,... [See More]
- Units: English
- Commutation: Brushless
- Motor Type: DC Motor
- DC Construction: Permanent Magnet
from DigiKey
DC Motor Gearmotor 3 ~ 5VDC [See More]
- Units: English
- DC Voltage Range: 7.0
- Motor Type: DC Motor
- Gearbox Ratio: 20
from ElectroCraft
ElectroCraft's MP26 integrates a 4-pole PMDC brush motor with a 2-stage right-angle worm gearbox, designed for industrial applications, adding industrial grade cabling plus encoder feedback options to support positioning capability. ElectroCraft MobilePower ™ gearmotors feature an integrated... [See More]
- Units: English
- Commutation: Brush
- Motor Type: DC Motor
- DC Construction: Permanent Magnet
from DigiKey
DC Motor Gearmotor 33 RPM 6VDC [See More]
- Units: English
- DC Voltage Range: 6.0
- Motor Type: DC Motor
- Continuous Torque: 1.0
from ElectroCraft
The Hansen series 116-8 gear motor matches our 1.6" diameter DC brush motor with a metal planetary gearbox. This is an ideal motor for medical applications where strong, coordinated, accurate motion control is required. The planet gears share the load attached to the output shaft giving the... [See More]
- Units: English
- Commutation: Brush
- Motor Type: DC Motor
- DC Construction: Permanent Magnet
from DigiKey
Brushed DC Motor Gearmotor Incremental 3VDC [See More]
- Units: English
- Commutation: Brush
- Motor Type: DC Motor
- DC Voltage Range: 3.0
from ElectroCraft
The Hansen series 116-9 gear motor matches our 1.6" diameter DC brush motor with a plastic planetary gearbox. The motor is ideal for medical applications where strong, coordinated, accurate motion control is required. The planet gears share the load attached to the output shaft giving the planetary... [See More]
- Units: English
- Commutation: Brush
- Motor Type: DC Motor
- DC Construction: Permanent Magnet
from DigiKey
DC Motor Gearmotor 270 RPM 12VDC [See More]
- Units: English
- Standard DC Voltage: 12V
- Motor Type: DC Motor
- DC Voltage Range: 12.0
from ElectroCraft
The Hansen series 121-8 gear motor matches our 2.1" diameter DC brush motor with a 2" diameter metal planetary gearbox. The planet gears share the load attached to the output shaft giving the planetary arrangement a higher torque to volume ratio with low backlash compared to a spur gear arrangement. [See More]
- Units: English
- Commutation: Brush
- Motor Type: DC Motor
- DC Construction: Permanent Magnet
from DigiKey
DC Motor Gearmotor 110 RPM 12VDC [See More]
- Units: English
- Standard DC Voltage: 12V
- Motor Type: DC Motor
- DC Voltage Range: 12.0
from ElectroCraft
The Hansen series 121-9 gear motor matches our 2.1" diameter DC brush motor with a 2" diameter plastic planetary gearbox. The planet gears share the load attached to the output shaft giving the planetary arrangement a higher torque to volume ratio with low backlash compared to a spur gear... [See More]
- Units: English
- Commutation: Brush
- Motor Type: DC Motor
- DC Construction: Permanent Magnet
from DigiKey
DC Motor Gearmotor 6 RPM 12VDC [See More]
- Units: English
- Standard DC Voltage: 12V
- Motor Type: DC Motor
- DC Voltage Range: 12.0
from ElectroCraft
ElectroCraft's MPP24 integrates a 4-pole Brushless DC motor with a very robust 2-stage right-angle worm gearbox, designed for industrial applications, adding industrial grade cabling plus encoder feedback options to support positioning capability. The MPP24 combines optimum performance with... [See More]
- Units: English
- Commutation: Brushless
- Motor Type: DC Motor
- Standard DC Voltage: 48V
from DigiKey
DC Motor Gearmotor 175 RPM 12VDC [See More]
- Units: English
- Standard DC Voltage: 12V
- Motor Type: DC Motor
- DC Voltage Range: 12.0
from ElectroCraft
ElectroCraft's MPP26 integrates a 4-pole PMDC brush motor with a very robust 2-stage right-angle worm gearbox, designed for industrial applications, adding industrial grade cabling plus encoder feedback options to support positioning capability. ElectroCraft MobilePower ™ gearmotors feature an... [See More]
- Units: English
- Commutation: Brush
- Motor Type: DC Motor
- DC Construction: Permanent Magnet
from DigiKey
DC Motor Gearmotor 1 RPM 12VDC [See More]
- Units: English
- Standard DC Voltage: 12V
- Motor Type: DC Motor
- DC Voltage Range: 12.0
from ElectroCraft
Hansen offers an inexpensive, 1.4" diameter DC brush motor on our 2" diameter spur gearbox. This motor is offered in voltages up to 24 volts DC along with several optional features. 4 ratios are offered, 12:1, 48:1, 192:1 and 768:1. The 2" gearbox motor life is rated at 1000 hours continuous duty... [See More]
- Units: English
- Commutation: Brush
- Motor Type: DC Motor
- DC Construction: Permanent Magnet
from DigiKey
DC Motor Gearmotor 130 RPM 12VDC [See More]
- Units: English
- Standard DC Voltage: 12V
- Motor Type: DC Motor
- DC Voltage Range: 12.0
from ElectroCraft
Hansen offers our 1.6" diameter DC brush motor on a 2" diameter spur gearbox. This motor is offered in a wide range of operating voltages along with several optional features. Optional features offered include encoders, voltages, noise suppressors, custom shafting, custom leads and terminations,... [See More]
- Units: English
- Commutation: Brush
- Motor Type: DC Motor
- DC Construction: Permanent Magnet
from DigiKey
DC Motor Gearmotor 90 RPM 12VDC [See More]
- Units: English
- Standard DC Voltage: 12V
- Motor Type: DC Motor
- DC Voltage Range: 12.0
from ElectroCraft
Hansen offers our 2.1" diameter DC brush motor on our 2" diameter spur gearbox. This motor package is offered in a wide range of operating voltages and with 4 gear ratio options, 12:1, 48:1, 192:1 and 768:1. Optional features include encoders, noise suppressors, custom shafts, custom leads and... [See More]
- Units: English
- Commutation: Brush
- Motor Type: DC Motor
- DC Construction: Permanent Magnet
from DigiKey
DC Motor Gearmotor 900 RPM 12VDC [See More]
- Units: English
- Standard DC Voltage: 12V
- Motor Type: DC Motor
- DC Voltage Range: 12.0
from ElectroCraft
The series 119-1 (1.9 inch diameter) permanent magnet step motor is available in 7.5 degree or 15 degree step angles, and can be wound for bipolar or unipolar drives. Motors that are wound for bipolar drives can be run from an AC voltage source, using a capacitor to create a phase shift in the line... [See More]
- Units: English
- Standard DC Voltage: 12V; 24V
- Motor Type: Stepper Motor
- DC Voltage Range: 12.0 to 24.0
from DigiKey
DC Motor Gearmotor 0.5 RPM 12VDC [See More]
- Units: English
- Standard DC Voltage: 12V
- Motor Type: DC Motor
- DC Voltage Range: 12.0
from ElectroCraft
These gearmotors feature a Hansen size 19 step motor on a pear shaped gearbox. Nearly 3,000 unique gear ratios are available from 5.3:1 to 72,000:1. The thinner, standard duty, gearbox can handle intermittent torque levels up to 80 in-oz and continuous torque up to 40 in-oz. The thicker, heavy duty,... [See More]
- Units: English
- Standard DC Voltage: 24V
- Motor Type: Stepper Motor
- DC Voltage Range: 24.0
from DigiKey
DC Motor Gearmotor 4900 RPM 12VDC [See More]
- Units: English
- Standard DC Voltage: 12V
- Motor Type: DC Motor
- DC Voltage Range: 12.0
from ElectroCraft
The series 123-1 (2.3 inch diameter) permanent magnet step motors is available in 7.5 degree or 15 degree step angles, and can be wound for bipolar or unipolar drives. Motors that are wound for Bipolar drives can be run from an AC voltage source, using a capacitor to create a phase shift in the line... [See More]
- Units: English
- AC Voltage & Frequency: 24 to 240V; 208-230/240V 60Hz
- Motor Type: Stepper Motor
- Standard DC Voltage: 12V; 24V
from DigiKey
DC Motor Gearmotor 460 RPM 12VDC [See More]
- Units: English
- Standard DC Voltage: 12V
- Motor Type: DC Motor
- DC Voltage Range: 12.0
from ElectroCraft
These gearmotors feature a Hansen 123-1 series step motor on a 2 inch round spur gearbox. 4 gear ratios are available, 12:1, 48:1, 192:1 and 768:1. The heavy duty, gearbox can handle up to 500 in-oz intermittently and 250 in-oz continuously. Custom output shafts are available. [See More]
- Units: English
- AC Voltage & Frequency: 24 to 240V; 208-230/240V 60Hz
- Motor Type: Stepper Motor
- Standard DC Voltage: 24V
from DigiKey
DC Motor Gearmotor 20 RPM 12VDC [See More]
- Units: English
- Standard DC Voltage: 12V
- Motor Type: DC Motor
- DC Voltage Range: 12.0
from DigiKey
DC Motor Gearmotor 2600 RPM 12VDC [See More]
- Units: English
- Standard DC Voltage: 12V
- Motor Type: DC Motor
- DC Voltage Range: 12.0
from DigiKey
DC Motor Gearmotor 65 RPM 3 ~ 6VDC [See More]
- Units: English
- DC Voltage Range: 3.0 to 6.0
- Motor Type: DC Motor
- Continuous Torque: 0.7
from DigiKey
Brushed DC Motor Gearmotor 65 RPM Incremental 3VDC [See More]
- Units: English
- Commutation: Brush
- Motor Type: DC Motor
- DC Voltage Range: 3.0
from DigiKey
DC Motor Gearmotor 140 RPM 4.5VDC [See More]
- Units: English
- DC Voltage Range: 4.5
- Motor Type: DC Motor
- Continuous Torque: 0.7
from DigiKey
Brushed DC Motor Gearmotor 140 RPM 1.6W 6 ~ 24VDC [See More]
- Units: English
- Commutation: Brush
- Motor Type: DC Motor
- DC Voltage Range: 6.0 to 24.0
from DOGA, S.A.
DOGA DC Motors and Gear Motors are developed with optimal adaptation capabilities so that each motor can be customized for the client. As part of its main mission to offer custom Design Motors and Gear Motors already for very low production volumes, DOGA is able to provide a wide range of customized... [See More]
- Units: English
- Commutation: Brush
- Motor Type: DC Motor
- DC Construction: Permanent Magnet
from M.H. Rhodes/Cramer Company
The Cramer line of AC Permanent Magnet Motors offers application solutions requiring fast starts, fast stops where coasting of load is undesirable and low wattage operating power consumption. Valve drive assemblies. Automatic teller machines. POP displays. Timing control systems [See More]
- Units: English
- AC Construction: Synchronous
- Motor Type: AC Motor
- AC Voltage & Frequency: 24 VAC; 120V/60Hz; 208-230/240V 60Hz
from CGI, Inc.
Garhead Ambient Operating Temperature Range -60 ˚F to +250 ˚F. Motor is rated to 265 ˚F. Molded Composite Housing (Max. Temp. 420 ˚F). Gears are High-Strength Heat-Treated Steel. Composite Bushings throughout Gearhead. Input/Output shafts turn in the same direction. [See More]
- Units: English
- Stepper Construction: Permanent Magnet
- Motor Type: Stepper Motor
- Current per Phase: 1.25 to 4.7
from Groschopp, Inc.
Low noise, long life. Groschopp AC Motors are constructed with class "H" insulation components allowing for running temperatures up to 180 degrees C. High-efficiency synthetic oil lubricant. Hardened output shaft. Ball and roller bearings. Multiple mounting positions. Rugged cast housing [See More]
- Units: English
- AC Voltage & Frequency: 208-230/240V 60Hz
- Motor Type: AC Motor
- Phase: Three-phase
from Venture Mfg. Co.
Venture ’s 8500 series motor gearbox has been an industry standard for years. Our standard unit is available in three gear ratios – 18:1, 28:1 and 58:1 and with a multitude of options, we ’re sure to have one that meets your needs …. Features: 20% Duty Cycle typical (1on/4... [See More]
- Units: English
- Gear Type: Spur (optional feature)
- Motor Type: DC Motor
- Gearbox Ratio: 18 to 58
from Autotrol Corporation
The 200 motor is a permanent magnet gearmotor utilizing a cylindrical barium ferrite 2 pole field magnet. A three bar commutator and a choice of carbon brushes or bifurcated silver alloy brushes provide long life, quiet operation and low starting voltage. The three slot rotor is supported by... [See More]
- Units: English
- Commutation: Brush
- Motor Type: DC Motor
- DC Construction: Permanent Magnet
from Anaheim Automation, Inc.
High torque, ideal for low-precision applications, can be customized [See More]
- Units: English
- Number of Leads: 8
- Motor Type: Stepper Motor
- Continuous Current: 2.1
from Koford Engineering, LLC
bull; High performance slotless brushless motors for military, aerospace, medical/den-tal, electric power tools, and industrial applications. •Medium and long lengths available. •Speeds up 200,000 rpm. • Autoclavable versions for surgical/dental applications. • Vacuum versions... [See More]
- Units: English
- Standard DC Voltage: 12V; 24V; 48V
- Motor Type: DC Motor
- DC Voltage Range: 12.0 to 48.0
from Demag Cranes & Components
Demag type D helical gear motors are available in 9 sizes, as foot and flange-mounted units. The gear ratio of the basic two-stage gearbox is already very high. It can also be significantly increased by means of a third stage. Sizes D11 to D41 feature a housing of high-quality pressure die-cast... [See More]
- Units: English; Metric
- AC Construction: Induction
- Motor Type: AC Motor
- AC Voltage & Frequency: 208-230/240V 60Hz; 460/480V/60Hz; 575/600V/60Hz (optional feature); International Voltages (optional feature)
from M.H. Rhodes/Cramer Company
The Cramer line of DC Permanent Magnet Motors offers application solutions requiring fast starts, high starting torque and drive reversibility. Warning lights. Graphic plotters. Automatic teller machines. Printers. Medical pump and drive valves. Transit ticket dispensers. Card readers [See More]
- Units: English
- DC Construction: Permanent Magnet
- Motor Type: DC Motor
- AC Motor Features: Reversible
from Groschopp, Inc.
Low noise, long life. Groschopp AC Motors are constructed with class "H" insulation components allowing for running temperatures up to 180 degrees C. High-efficiency synthetic oil lubricant. Hardened output shaft. Ball and roller bearings. Multiple mounting positions. Rugged cast housing [See More]
- Units: English
- AC Voltage & Frequency: 208-230/240V 60Hz
- Motor Type: AC Motor
- Phase: Three-phase
from Venture Mfg. Co.
This versatile, motorized standard duty combination worm drive and spur gear driven gearbox can be produced with a variety of output shaft configurations and is also available with manual crank capabilities. Features: 20% Duty Cycle typical (1on/4 off). 12, 24, 36, 90 and 120vdc. Manual crank. Metal... [See More]
- Units: English
- Continuous Current: 30
- Motor Type: DC Motor
- Continuous Torque: 324.0
from Autotrol Corporation
The 250 motor is a permanent magnet gearmotor utilizing a cylindrical barium ferrite 2 pole field magnet. Carbon brushes provide long life, quiet operation and low starting voltage. The rotor is supported by permanently lubricated sintered bronze bearings. The 250 motor is availble in a wide range... [See More]
- Units: English
- Commutation: Brush
- Motor Type: DC Motor
- DC Construction: Permanent Magnet
from Koford Engineering, LLC
4 pole ultra high performance, rugged, slotless design provides unmatched power density,high con-tinuous and peak torque and is cog free. Available with optical encoders and gearheads (contact factory). 240 °C rated ML wire and 205 °C rated thermosetting thermally conductive resin are used... [See More]
- Units: English
- Standard DC Voltage: 12V; 24V
- Motor Type: DC Motor
- DC Voltage Range: 12.0 to 24.0
from Demag Cranes & Components
Demag type A offset gear motors are available in 9 sizes with shaft-mounted gearboxes and torque bracket and foot or flange-mounted configuration. They offer the optimum solution for space-saving drive requirements due to their compact design. Gearbox size A10 is a two-stage unit, all other units... [See More]
- Units: English; Metric
- AC Construction: Induction
- Motor Type: AC Motor
- AC Voltage & Frequency: 208-230/240V 60Hz; 460/480V/60Hz; 575/600V/60Hz (optional feature); International Voltages (optional feature)
from M.H. Rhodes/Cramer Company
Cramer's AC Hysteresis Motor is a shaded pole, synchronous-type that provides smooth, quiet performance and allows operation to a stall condition without damage or increase in temperature rise. External rear bearing provides stability, strength and allows for a double-ended output shaft that can be... [See More]
- Units: English
- AC Construction: Synchronous
- Motor Type: AC Motor
- AC Voltage & Frequency: 24 VAC; 120V/60Hz; 208-230/240V 60Hz; International Voltages
from Groschopp, Inc.
Low noise, long life. Groschopp BLDC Motors are rated for 130 degrees C continuous internal temperature. High-efficiency synthetic oil lubricant. Hardened output shaft. Ball bearings. Multiple mounting positions. Rugged cast housing [See More]
- Units: English
- Commutation: Brushless
- Motor Type: DC Motor
- AC Motor Features: Reversible (optional feature)
from Venture Mfg. Co.
This versatile, medium duty, worm drive, right angle drive gearbox is commonly used in RV slide out systems, but can also be used in many other applications, maybe it will fit into one of yours. Features: 12 vdc. 20% Duty Cycle typical (1on/4 off). Manual crank. Metal Gears. Lifetime lubrication. [See More]
- Units: English
- Continuous Current: 5 to 30
- Motor Type: DC Motor
- Continuous Torque: 1000.0
from Autotrol Corporation
Permanent magnet synchronous motor used in applications requiring up to 125 ounce-inches (9,000 gm.-cm.) of dynamic torque. Cut metal or molded plastic gear trains, different output shafts and clutches offer flexibility to meet a variety of application requirements. Our newest gearmotor for timing... [See More]
- Units: English
- AC Construction: Synchronous
- Motor Type: AC Motor
- AC Voltage & Frequency: 24 V; 120V/60Hz; 208-230/240V 60Hz
from Koford Engineering, LLC
4 pole ultra high performance, rugged, slotless design provides unmatched power density,high continuous and peak torque and is cog free. Available with optical encoders and gearheads. 240 °C rated ML wire and 205 °C rated thermosetting thermally conductive resin are used for the windings for... [See More]
- Units: English
- Standard DC Voltage: 24V; 48V
- Motor Type: DC Motor
- DC Voltage Range: 24.0 to 48.0
from Demag Cranes & Components
Demag type W right angle gear motors are available in 10 sizes. They are fitted with output flanges, foot rails or torque brackets to meet your requirements. Right angle gearbox sizes W10 to W50 feature a hypoid wheel pair, offering good efficiency in the lower power range for quiet running... [See More]
- Units: English; Metric
- AC Construction: Induction
- Motor Type: AC Motor
- AC Voltage & Frequency: 208-230/240V 60Hz; 460/480V/60Hz; 575/600V/60Hz (optional feature); International Voltages (optional feature)
from Groschopp, Inc.
Low noise, long lifeGroschopp DC Motors are constructed with class "B" insulation components allowing for running temperatures up to 130 degrees C. High-efficiency synthetic oil lubricant. Hardened output shaft. Ball and roller bearings. Multiple mounting positions. Rugged cast housing [See More]
- Units: English
- Commutation: Brushless
- Motor Type: DC Motor
- AC Motor Features: Reversible (optional feature)
from Venture Mfg. Co.
This versatile, heavy duty combination worm drive and spur gear driven gearbox can be used for virtually any application imaginable where strength and reliability are needed.. Features: 12 vdc. 20% Duty Cycle typical (1on/4 off). Manual crank. Metal Gears. Lifetime lubrication. Cast aluminum... [See More]
- Units: English
- Continuous Current: 30
- Motor Type: DC Motor
- Continuous Torque: 960.0
from Autotrol Corporation
Permanent magnet synchronous motor used in applications requiring up to 125 ounce-inches (9,000 gm.-cm.) of dynamic torque. Cut metal or molded plastic gear trains, different output shafts and clutches offer flexibility to meet a variety of application requirements. Our most popular low cost... [See More]
- Units: English
- AC Construction: Synchronous
- Motor Type: AC Motor
- AC Voltage & Frequency: 24 V; 120V/60Hz; 208-230/240V 60Hz
from Koford Engineering, LLC
4 pole ultra high performance, rugged, slotless design provides unmatched power density,high continuous and peak torque and is cog free. 240 °C rated ML wire and 205 °C rated thermosetting thermally conductive resin are used for the windings for the ultimate in ruggedness. Available in hall... [See More]
- Units: English
- Standard DC Voltage: 24V; 48V
- Motor Type: DC Motor
- DC Voltage Range: 24.0 to 48.0
from Groschopp, Inc.
Low noise, long lifeGroschopp DC Motors are constructed with class "B" insulation components allowing for running temperatures up to 130 degrees C. High-efficiency synthetic oil lubricant. Hardened output shaft. Ball and roller bearings. Multiple mounting positions. Rugged cast housing [See More]
- Units: English
- AC Motor Features: Reversible (optional feature)
- Motor Type: DC Motor
- Standard DC Voltage: 12V
from Venture Mfg. Co.
The M-9000 motor gearbox is available with or without a switch and wire harness. It is used to power most landing gear systems and can easily be added if a motor did not come as OEM equipment. For heavy coaches or to add the ability to level, Dual motors can be added to virtually any system. [See More]
- Units: English
- Continuous Current: 25 to 30
- Motor Type: DC Motor
- Continuous Torque: 150.0
from Autotrol Corporation
A powerful permanent magnet synchronous motor in a very compact package. Delivers 500 ounce-inches of torque at 1 RPM. Speeds available from 1/2 RPM to 240 RPM. Suitable for many instrument and industrial applications. AC Gear Motor - Model 500 Features. Compact package. High torque at low profile. [See More]
- Units: English
- AC Construction: Synchronous
- Motor Type: AC Motor
- AC Voltage & Frequency: 24 V; 120V/60Hz; 208-230/240V 60Hz; International Voltages
from Koford Engineering, LLC
High performance design uses special low loss lamination material. Four pole design is optimum for positioning applications using hall signals for speed feedback because it offers twice the resolution, as well as increased power and speed compared to two pole motors. Slotless design is cog free for... [See More]
- Units: English
- Standard DC Voltage: 12V; 24V
- Motor Type: DC Motor
- DC Voltage Range: 12.0 to 24.0
from Groschopp, Inc.
Low noise, long lifeGroschopp DC Motors are constructed with class "B" insulation components allowing for running temperatures up to 130 degrees C. High-efficiency synthetic oil lubricant. Hardened output shaft. Ball and roller bearings. Multiple mounting positions. Rugged cast housing [See More]
- Units: English
- AC Motor Features: Reversible (optional feature)
- Motor Type: DC Motor
- Standard DC Voltage: 12V
from Venture Mfg. Co.
Venture ’s very versatile 890 Series actuators combine our standard 8500 series DC motor gearbox with a right angle worm drive gearbox providing a rugged and reliable motorized gearbox typically used with the above floor rack and pinion style slide out system. It is available in a large... [See More]
- Units: English
- Gear Type: Spur (optional feature); Worm
- Motor Type: DC Motor
- Gearbox Ratio: 18 to 58
from Autotrol Corporation
Autotrol ’s New High Performance Gear Motor. Permanent magnet synchronous gear motor used in applications requiring up to 525 ounce inches of dynamic torque. It is available with either molded plastic gearing or powdered metal and heat treated gears. There are four standard output shaft... [See More]
- Units: English
- AC Construction: Synchronous
- Motor Type: AC Motor
- AC Voltage & Frequency: 24 V; 120V/60Hz; 208-230/240V 60Hz
from Koford Engineering, LLC
High power density high efficiency slotless design is cog free, cost effective, quiet, and provides high efficiency and cool operation. ML insulation is used for the greatest possible durability. 200 °C Neo magnets are used along with hard-ened and ground 440C stainless shaft, and high temp TFE... [See More]
- Units: English
- Standard DC Voltage: 12V; 24V; 48V
- Motor Type: DC Motor
- DC Voltage Range: 12.0 to 48.0
from Groschopp, Inc.
Low noise, long lifeGroschopp DC Motors are constructed with class "B" insulation components allowing for running temperatures up to 130 degrees C. High-efficiency synthetic oil lubricant. Hardened output shaft. Ball and roller bearings. Multiple mounting positions. Rugged cast housing [See More]
- Units: English
- AC Motor Features: Reversible (optional feature)
- Motor Type: DC Motor
- Standard DC Voltage: 12V
from Autotrol Corporation
Instrument grade permanent magnet synchronous motor is electrically reversible and is precision built for long life applications. Available in speeds from 1 RPM to 240 RPM. Also available without gearhead as direct drive motor...consult factory. AC Gear Motor - Model 550 Features. Electrically... [See More]
- Units: English
- AC Construction: Synchronous
- Motor Type: AC Motor
- AC Voltage & Frequency: 24 V; 120V/60Hz; 208-230/240V 60Hz; International Voltages
from Koford Engineering, LLC
Slotless design is cog free, and provides high efficiency and cool operation at high speed. Large bear-ings for long life.150 °C rated Neo rare earth magnets standard. Available with 120 ° hall sensors or sensorless. Hall sensors recomended for positioning or where a significant inertial... [See More]
- Units: English
- Standard DC Voltage: 24V
- Motor Type: DC Motor
- DC Voltage Range: 16.0 to 24.0
from Groschopp, Inc.
Low noise, long life. Groschopp AC Motors are constructed with class "H" insulation components allowing for running temperatures up to 180 degrees C. High-efficiency synthetic oil lubricant. Hardened output shaft. Ball and roller bearings. Multiple mounting positions. Rugged cast housing [See More]
- Units: English
- AC Voltage & Frequency: 208-230/240V 60Hz
- Motor Type: AC Motor
- Phase: Three-phase
from Koford Engineering, LLC
Cog free, slotless, low inductance design for highest performance, perfect for direct drive applications and other precision servo applications. ML insulation is used for the greatest possible durability. 150 °C Neo magnets are used along with stainless shaft, and high temp TFE insulated lead... [See More]
- Units: English
- Standard DC Voltage: 24V; 48V
- Motor Type: DC Motor
- DC Voltage Range: 24.0 to 48.0
from Groschopp, Inc.
Low noise, long life. Groschopp AC Motors are constructed with class "H" insulation components allowing for running temperatures up to 180 degrees C. High-efficiency synthetic oil lubricant. Hardened output shaft. Ball and roller bearings. Multiple mounting positions. Rugged cast housing [See More]
- Units: English
- AC Voltage & Frequency: 208-230/240V 60Hz
- Motor Type: AC Motor
- Phase: Three-phase
from Koford Engineering, LLC
Slotless design is cog free, and provides very smooth rotation and very low heat rise to avoid affecting temperature sensitive components in scientific instruments and other de-vices. Typically these motors are used to rotate optics, filters, and mirrors mounted onto the end of the motor shaft. They... [See More]
- Units: English
- Standard DC Voltage: 12V
- Motor Type: DC Motor
- DC Voltage Range: 12.0
from Groschopp, Inc.
Low noise, long life. Groschopp AC Motors are constructed with class "H" insulation components allowing for running temperatures up to 180 degrees C. High-efficiency synthetic oil lubricant. Hardened output shaft. Ball and roller bearings. Multiple mounting positions. Rugged cast housing [See More]
- Units: English
- AC Voltage & Frequency: 208-230/240V 60Hz
- Motor Type: AC Motor
- Phase: Three-phase
from Koford Engineering, LLC
Neo rare earth magnets standard for high performance. Electrographite brushes for longmotor life at high speeds. Available with EMI filters. Compact and cost efficient designmakes it suitable for a variety of applications such as medical/dental handpieces, intermittentduty pumps, lab mixers... [See More]
- Units: English
- Standard DC Voltage: 12V; 24V
- Motor Type: DC Motor
- DC Voltage Range: 12.0 to 30.0
from Groschopp, Inc.
Low noise, long life. Groschopp AC Motors are constructed with class "H" insulation components allowing for running temperatures up to 180 degrees C. High-efficiency synthetic oil lubricant. Hardened output shaft. Ball and roller bearings. Multiple mounting positions. Rugged cast housing [See More]
- Units: English
- AC Voltage & Frequency: 208-230/240V 60Hz
- Motor Type: AC Motor
- Phase: Three-phase
from Groschopp, Inc.
Low noise, long life. Groschopp AC Motors are constructed with class "H" insulation components allowing for running temperatures up to 180 degrees C. High-efficiency synthetic oil lubricant. Hardened output shaft. Ball and roller bearings. Multiple mounting positions. Rugged cast housing [See More]
- Units: English
- AC Voltage & Frequency: 208-230/240V 60Hz
- Motor Type: AC Motor
- Phase: Three-phase
from Groschopp, Inc.
Low noise, long life. Groschopp BLDC Motors are rated for 130 degrees C continuous internal temperature. High-efficiency synthetic oil lubricant. Turned, heat-treated and ground shaft. Ball bearings. Multiple mounting positions. Rugged cast housing [See More]
- Units: English
- AC Motor Features: Reversible (optional feature)
- Motor Type: AC Motor
- DC Voltage Range: 163.0
from Groschopp, Inc.
Low noise, long life. Groschopp BLDC Motors are rated for 130 degrees C continuous internal temperature. High-efficiency synthetic oil lubricant. Turned, heat-treated and ground shaft. Ball bearings. Multiple mounting positions. Rugged cast housing [See More]
- Units: English
- Commutation: Brushless
- Motor Type: DC Motor
- AC Motor Features: Reversible (optional feature)
from Groschopp, Inc.
Low noise, long life. Groschopp BLDC Motors are rated for 130 degrees C continuous internal temperature. High-efficiency synthetic oil lubricant. Turned, heat-treated and ground shaft. Ball bearings. Multiple mounting positions. Rugged cast housing [See More]
- Units: English
- Commutation: Brushless
- Motor Type: DC Motor
- AC Motor Features: Reversible (optional feature)
from Groschopp, Inc.
Low noise, long lifeGroschopp DC Motors are constructed with class "B" insulation components allowing for running temperatures up to 130 degrees C. High-efficiency synthetic oil lubricant. Hardened output shaft. Ball and roller bearings. Multiple mounting positions. Rugged cast housing [See More]
- Units: English
- AC Motor Features: Reversible (optional feature)
- Motor Type: DC Motor
- DC Voltage Range: 115.0
from Groschopp, Inc.
Low noise, long lifeGroschopp DC Motors are constructed with class "B" insulation components allowing for running temperatures up to 130 degrees C. High-efficiency synthetic oil lubricant. Hardened output shaft. Ball and roller bearings. Multiple mounting positions. Rugged cast housing [See More]
- Units: English
- AC Motor Features: Reversible (optional feature)
- Motor Type: DC Motor
- Standard DC Voltage: 12V
from Groschopp, Inc.
Low noise, long lifeGroschopp DC Motors are constructed with class "B" insulation components allowing for running temperatures up to 130 degrees C. High-efficiency synthetic oil lubricant. Hardened output shaft. Ball and roller bearings. Multiple mounting positions. Rugged cast housing [See More]
- Units: English
- AC Motor Features: Reversible (optional feature)
- Motor Type: DC Motor
- Standard DC Voltage: 12V
from Groschopp, Inc.
Low noise, long lifeGroschopp DC Motors are constructed with class "B" insulation components allowing for running temperatures up to 130 degrees C. High-efficiency synthetic oil lubricant. Hardened output shaft. Ball and roller bearings. Multiple mounting positions. Rugged cast housing [See More]
- Units: English
- AC Motor Features: Reversible (optional feature)
- Motor Type: DC Motor
- Standard DC Voltage: 12V
from Groschopp, Inc.
Low noise, long life. Groschopp AC Motors are constructed with class "H" insulation components allowing for running temperatures up to 180 degrees C. High-efficiency synthetic oil lubricant. Hardened output shaft. Ball and roller bearings. Multiple mounting positions. Rugged cast housing [See More]
- Units: English
- AC Voltage & Frequency: 208-230/240V 60Hz
- Motor Type: AC Motor
- Phase: Three-phase
from Groschopp, Inc.
Low noise, long life. Groschopp AC Motors are constructed with class "H" insulation components allowing for running temperatures up to 180 degrees C. High-efficiency synthetic oil lubricant. Hardened output shaft. Ball and roller bearings. Multiple mounting positions. Rugged cast housing [See More]
- Units: English
- AC Voltage & Frequency: 208-230/240V 60Hz
- Motor Type: AC Motor
- Phase: Three-phase
from Groschopp, Inc.
Low noise, long life. Groschopp BLDC Motors are rated for 130 degrees C continuous internal temperature. High-efficiency synthetic lubricant. Hardened output shaft. Ball bearings. Multiple mounting positions. Rugged cast housing [See More]
- Units: English
- Commutation: Brushless
- Motor Type: DC Motor
- AC Motor Features: Reversible (optional feature)
from Groschopp, Inc.
Low noise, long lifeGroschopp DC Motors are constructed with class "B" insulation components allowing for running temperatures up to 130 degrees C. High-efficiency synthetic oil lubricant. Hardened output shaft. Ball and roller bearings. Multiple mounting positions. Rugged cast housing [See More]
- Units: English
- AC Motor Features: Reversible (optional feature)
- Motor Type: DC Motor
- Standard DC Voltage: 12V
from Groschopp, Inc.
Low noise, long lifeGroschopp DC Motors are constructed with class "B" insulation components allowing for running temperatures up to 130 degrees C. High-efficiency synthetic oil lubricant. Hardened output shaft. Ball and roller bearings. Multiple mounting positions. Rugged cast housing [See More]
- Units: English
- AC Motor Features: Reversible (optional feature)
- Motor Type: DC Motor
- Standard DC Voltage: 12V
from Groschopp, Inc.
Low noise, long lifeGroschopp DC Motors are constructed with class "B" insulation components allowing for running temperatures up to 130 degrees C. High-efficiency synthetic oil lubricant. Hardened output shaft. Ball and roller bearings. Multiple mounting positions. Rugged cast housing [See More]
- Units: English
- AC Motor Features: Reversible (optional feature)
- Motor Type: DC Motor
- Standard DC Voltage: 12V