Torque Motor Brushless Motors
from Shenzhen Power Motor Industrial Co., Ltd.
Large Inner Diameter Through Holes; Accommodates Shafts, Cables, Tools, etc.; Low Cogging Design; Stainless Steel Inner Ring, Effective Anti-Corrosion; High Efficiency Achieved Over a Wide Speed Range. [See More]
- Features: Torque Motor
- AC Voltage & Frequency: 48V
- Motor Type: DC Motor
- Standard DC Voltage: 48V
from GEEPLUS Inc.
With high starting torque and faster acceleration / deceleration, the motor produces less heat and less noise by eliminating ionizing spikes from brushes. This makes the brushless motor suitable for use in a number of sensitive applications, including medical equipment. Additional application... [See More]
- Features: Torque Motor
- Units: Metric
- Motor Type: Servomotor; DC Motor
- Shaft Size: 1.654
from Tecnotion
The QMT-HA 385 series redefines what's possible in the same stator size. Delivering up to 41% more performance, it upgrades your machine with minimal mechanical impact. The HA series distinguished itself with an increased rotor height while keeping the outside of the stator equal. With seamless... [See More]
- Features: Torque Motor
- AC Construction: Synchronous
- Motor Type: AC Motor
- AC Voltage & Frequency: 680 VDC; 120V/60Hz; 208-230/240V 60Hz; 460/480V/60Hz
from ETEL S.A.
The TMB+ motor is a further development of the well-known TMB torque motor series that promises more power and new functions without compromising compatibility with existing motors. This motor represents a significant advancement in torque motor technology, boasting up to a 20% increase in torque... [See More]
- Features: Torque Motor
- Continuous Torque: 191.2 to 197345.1
- Motor Type: DC Motor
- Shaft Speed: 143 to 4590
from Tecnotion
The QMT-HA 485 with it's unmatched performance, is Tecnotion's largest high-torque motor. It enables more accuracy or increases machine productivity. The largest QMT-HA 485 series sets the new benchmark, delivering up to 80% more performance with the same stator and rotor footprint. The higher rotor... [See More]
- Features: Torque Motor
- AC Construction: Synchronous
- Motor Type: AC Motor
- AC Voltage & Frequency: 680 VDC; 120V/60Hz; 208-230/240V 60Hz; 460/480V/60Hz
from ETEL S.A.
The TMC torque motor series by ETEL sets a new benchmark in machine tool applications, combining innovation and performance in a compact footprint. While retaining the robustness, repeatability, and reliability of its predecessors, TMC offers an additional option beyond traditional torque motors... [See More]
- Features: Torque Motor
- Continuous Torque: 48053.1
- Motor Type: DC Motor
- Shaft Speed: 900
from Tecnotion
The QMT-LA 230 series is designed for seamless integration - whether in existing systems or new setups. Its aluminum housing keeps weight low, boosting dynamics in rotary tables, trunnion tables, or other moving axes. [See More]
- Features: Torque Motor
- AC Construction: Synchronous
- Motor Type: AC Motor
- AC Voltage & Frequency: 680 VDC; 120V/60Hz; 208-230/240V 60Hz; 460/480V/60Hz
from ETEL S.A.
The TMKi torque motor range introduces a revolutionary design that redefines the capabilities of torque motors, pushing speed levels to unprecedented heights while maintaining robust performance. TMKi family is a continuous improvement of the well-known TMK motors, which stand out with their... [See More]
- Features: Torque Motor
- Continuous Current: 10.9 to 318
- Motor Type: DC Motor
- Continuous Torque: 675.2 to 102654.9
from Tecnotion
The QMT-LA 310 series is one of the most widely used motor series because it is suitable for many applications, from cutting and grinding to metrology and indexing tables. Its high efficiency keeps cooling demand low, making it ideal as a direct replacement in existing machines. With this upgrade,... [See More]
- Features: Torque Motor
- AC Construction: Synchronous
- Motor Type: AC Motor
- AC Voltage & Frequency: 680 VDC; 120V/60Hz; 208-230/240V 60Hz; 460/480V/60Hz
from ETEL S.A.
The TML torque motor offers a cost-effective solution for applications requiring dynamic performance comparable to direct drive torque motors, without the need for water cooling. As a lighter and more economical alternative to the renowned TMB motor, the TML torque motor range caters to applications... [See More]
- Features: Torque Motor
- Continuous Torque: 216.8 to 9469.0
- Motor Type: DC Motor
- Diameter / Width: 8.27 to 20.87
from Tecnotion
The QMT-LA 385 delivers up to 15% more performance in both continuous torque and efficiency, without changing the mounting interface. It raises the standard for torque density in its class. Looking beyond 15%? The QMT-HA 385, with its higher rotor design, takes performance even to the next level. [See More]
- Features: Torque Motor
- AC Construction: Synchronous
- Motor Type: AC Motor
- AC Voltage & Frequency: 680 VDC; 120V/60Hz; 208-230/240V 60Hz; 460/480V/60Hz
from ETEL S.A.
The TMM torque motor offers a cost-effective solution for applications requiring dynamic performance akin to direct drive torque motors, without the need for water cooling. As a lightweight and economical alternative to the renowned TMB motor, our TMM torque motor range caters to applications where... [See More]
- Features: Torque Motor
- Continuous Torque: 79.6 to 10354.0
- Motor Type: DC Motor
- Diameter / Width: 5.51 to 20.87
from Tecnotion
The QMT-LA 485 boosts both continuous torque and efficiency by up to 15%, all while keeping the same mounting interface. Thanks to its aluminum housing, this powerhouse is lighter than expected. This low weight makes installation easier and reduces the overall impact on your machine. When 15% isn't... [See More]
- Features: Torque Motor
- AC Construction: Synchronous
- Motor Type: AC Motor
- AC Voltage & Frequency: 680 VDC; 120V/60Hz; 208-230/240V 60Hz; 460/480V/60Hz
from Tecnotion
The QTL 210 series provides more torque than the smaller QTR series. The QTL 210 is the smallest of the QTL range and is available in three heights, 65, 85 and 105 mm. It has a large inner diameter suitable to route multiple cables through, allowing flexibility in the application. It therefore suits... [See More]
- Features: Torque Motor
- AC Construction: Synchronous
- Motor Type: AC Motor
- AC Voltage & Frequency: 680 VDC; 120V/60Hz; 208-230/240V 60Hz; 460/480V/60Hz
from Tecnotion
The QTL 230 is essentially a QTL 210 motor with a cooling ring for high continuous torque even in combination with high duty cycles and dynamic movement profiles. This cooling ring should be closed with the housing, which creates a cooling channel. It will deliver 67-146 Nm continuous torque and... [See More]
- Features: Torque Motor
- AC Construction: Synchronous
- Motor Type: AC Motor
- AC Voltage & Frequency: 680 VDC; 120V/60Hz; 208-230/240V 60Hz; 460/480V/60Hz
from Tecnotion
The QTL 290 expands on the QTL 210 design to meet even higher torque demands. In combination with low induction values and fast response time this series allows for highly dynamic movements. It makes the series ideal for usage in packaging and laser cutting machinery. The motor should be connected... [See More]
- Features: Torque Motor
- AC Construction: Synchronous
- Motor Type: AC Motor
- AC Voltage & Frequency: 680 VDC; 120V/60Hz; 208-230/240V 60Hz; 460/480V/60Hz
from Tecnotion
The QTL 310 series is based on the QTL 290 with the addition of cooling ring. The cooling ring provides bolting holes for easy installation. This cooling ring should be closed with the housing, which creates a cooling channel. The motor is a reliable heavy duty workhorse. Because of the integrated... [See More]
- Features: Torque Motor
- AC Construction: Synchronous
- Motor Type: AC Motor
- AC Voltage & Frequency: 680 VDC; 120V/60Hz; 208-230/240V 60Hz; 460/480V/60Hz
from Tecnotion
The QTR 65 is the smallest torque motor in the Tecnotion torque motor range. This motor is optimized for small and low-voltage applications. With an outer diameter of 65mm and an inner diameter of 17 mm, this motor offers unique opportunities for small applications. The 65 Series is available in... [See More]
- Features: Torque Motor
- AC Construction: Synchronous
- Motor Type: AC Motor
- AC Voltage & Frequency: 565 VDC; 120V/60Hz; 208-230/240V 60Hz
from Aerotech, Inc.
Design Features. Slotless, brushless ring motors with high torque output and zero cogging. Frameless design for easy integration into OEM machines. Various winding options available. Includes Hall effect sensors for commutation [See More]
- Features: Torque Motor
- DC Construction: Permanent Magnet; Coreless / Slotless
- Motor Type: DC Motor
- Standard DC Voltage: 160V
from Parker Hannifin / Automation / Electromechanical Division - Europe
The high inertia torque motor with outer rotor: High Precision. High Dynamic Stiffness. Stall Torque Range 15 ... 30 Nm [See More]
- Features: Torque Motor
- AC Voltage & Frequency: 400V
- Motor Type: AC Servo
- Continuous Torque: 132.7
from MTC Industries & Research Carmiel Ltd.
The MTM-25-9BL is a DC torque motor that provides smooth operation without slot effect. The MTM-25-9BL provides a high accuracy in positioning, actuating, tensioning, measuring and indicating applications for both military and industrial use. Brushless operation eliminates electrical and mechanical... [See More]
- Features: Torque Motor
- DC Construction: Permanent Magnet; Coreless / Slotless
- Motor Type: DC Motor
- Output Power: 0.0214
from Transmotec
Brushless dc motors in customized or standard configurations. Standard diameters and flange sizes between 22 mm and 86 mm and power ratings up to 650W. Designs and body constructions are square and cylinder shapes. All motors have as standard integral hall sensors. Double ball bearings are used as... [See More]
- Features: Torque Motor
- Standard DC Voltage: 24V
- Motor Type: DC Motor
- DC Voltage Range: 24.0
from Kollmorgen Corporation
The Kollmorgen TBM (Torquer Brushless Motor) Series direct drive frameless motor is designed to be directly embedded in your machine, using the machine ’s own bearings to support the rotor. This series is designed for applications that require high power in a small, compact form factor with... [See More]
- Features: Torque Motor
- Standard DC Voltage: 24V; 48V; 72V; 90V
- Motor Type: DC Motor
- DC Voltage Range: 24.0 to 96.0
from Genesis Motion
High Performance. Compact. Flexible. The LiveDrive ® LDR series has industry-leading torque density in smaller sizes along with an IP54 rating and a through hole. LDR motors are housed with features designed specifically for machine builders to increase throughput, flexibility, and design... [See More]
- Features: Torque Motor
- AC Voltage & Frequency: 208-230/240V 60Hz
- Motor Type: AC Servo; Servomotor; AC Motor; DC Motor
- Output Power: 1.06
from H2W Technologies
H2W Technologies Limited Angle Torque Motors are ideal for compact, limited angular excursion ( <180 º), rotary, closed loop servo applications. Unlike conventional rotary brush and brushless motors, the torquers are wound in such a way that no commutation is required for motion to occur. [See More]
- Features: Torque Motor
- DC Construction: Toroidally Wound Iron Core; Permanent Magnet
- Motor Type: DC Motor
- Continuous Torque: 0.1
from Parker Hannifin / Automation / Electromechanical Division - Europe
Build your own High-Performance Motor. When to use: A significant cost saving. Reduced mechanical complexity. Greater design flexibility. High performance in a compact package. Minimum motor size per application space. Low cogging for smooth operation. Low inertia for high acceleration [See More]
- Features: Torque Motor
- Continuous Torque: 0.4 to 2.9
- Motor Type: AC Servo
- Rotor Inertia: 2.19E-5 to 2.67E-4
from MTC Industries & Research Carmiel Ltd.
The MTM-40-9BL is a DC torque motor that provides smooth operation without slot effect. The MTM-40-9BL provides high accuracy in positioning, actuating, tensioning, measuring and indicating applications, for both military and industrial use. Brushless operation eliminates electrical and mechanical... [See More]
- Features: Torque Motor
- DC Construction: Coreless / Slotless
- Motor Type: DC Motor
- Output Power: 0.0335
from H2W Technologies
Limited Angle Torque Motors are ideal for compact, limited angular excursion ( <180 º), rotary, closed loop servo applications. Unlike conventional rotary brush and brushless motors, the torquers are wound in such a way that no commutation is required for motion to occur. The result is a... [See More]
- Features: Torque Motor
- DC Construction: Toroidally Wound Iron Core; Permanent Magnet
- Motor Type: DC Motor
- Output Power: 1/4 HP
from Parker Hannifin / Automation / Electromechanical Division - Europe
Continuous torque up to 235 Nm and peak torque up to 1161 Nm. Hollow shaft options (up to 75 mm diameter). Rated speeds from 200 to 1500 rpm. Two motor technologies: HP: High precision. SP: Standard precision. Position feedback options: Resolver: precision ±1 arc-min or ±10 arc-min. [See More]
- Features: Torque Motor
- Output Power: 1 HP; 2 HP
- Motor Type: AC Servo
- Output Power: 0.9851 to 2.72
from MTC Industries & Research Carmiel Ltd.
The MLRM-2808 is a limited rotation DC torque motor with smooth operation and without slot effect. This product provides high accuracy in positioning, actuating, tensioning, measuring and indicating applications, for military as well as commercial use. The brushless operation eliminates electrical... [See More]
- Features: Torque Motor
- DC Construction: Coreless / Slotless
- Motor Type: DC Motor
- DC Voltage Range: 15.0
from H2W Technologies
H2W Technologies Limited Angle Torque Motors are ideal for compact, limited angular excursion ( <180 º), rotary, closed loop servo applications. Unlike conventional rotary brush and brushless motors, the torquers are wound in such a way that no commutation is required for motion to occur. [See More]
- Features: Torque Motor
- DC Construction: Toroidally Wound Iron Core; Permanent Magnet
- Motor Type: DC Motor
- Continuous Torque: 0.2
from Parker Hannifin / Automation / Electromechanical Division - Europe
Continuous torque from 14 Nm to 2700 Nm with natural convection (according to size), and up to 6100 Nm with fluid cooling. Six external diameters from 145 mm to 800 mm. Internal diameters from 56 mm to 630 mm. Various windings available from 30 min-1 to 1500 min-1 according to size. Parker?s STK... [See More]
- Features: Torque Motor
- DC Construction: Permanent Magnet
- Motor Type: DC Motor
- Output Power: 1 HP; 2 HP
from H2W Technologies
H2W Technologies Limited Angle Torque Motors are ideal for compact, limited angular excursion ( <180 º), rotary, closed loop servo applications. Unlike conventional rotary brush and brushless motors, the torquers are wound in such a way that no commutation is required for motion to occur. [See More]
- Features: Torque Motor
- DC Construction: Toroidally Wound Iron Core; Permanent Magnet
- Motor Type: DC Motor
- Stepper Construction: Permanent Magnet
from H2W Technologies
H2W Technologies Limited Angle Torque Motors are ideal for compact, limited angular excursion ( <180 º), rotary, closed loop servo applications. Unlike conventional rotary brush and brushless motors, the torquers are wound in such a way that no commutation is required for motion to occur. [See More]
- Features: Torque Motor
- DC Construction: Toroidally Wound Iron Core; Permanent Magnet
- Motor Type: DC Motor
- Continuous Torque: 0.6
from H2W Technologies
H2W Technologies Limited Angle Torque Motors are ideal for compact, limited angular excursion ( <180 º), rotary, closed loop servo applications. Unlike conventional rotary brush and brushless motors, the torquers are wound in such a way that no commutation is required for motion to occur. [See More]
- Features: Torque Motor
- DC Construction: Toroidally Wound Iron Core; Permanent Magnet
- Motor Type: DC Motor
- Continuous Torque: 16.6
from H2W Technologies
H2W Technologies Limited Angle Torque Motors are ideal for compact, limited angular excursion ( <180 º), rotary, closed loop servo applications. Unlike conventional rotary brush and brushless motors, the torquers are wound in such a way that no commutation is required for motion to occur. [See More]
- Features: Torque Motor
- DC Construction: Toroidally Wound Iron Core; Permanent Magnet
- Motor Type: DC Motor
- Continuous Torque: 0.6
from H2W Technologies
H2W Technologies Limited Angle Torque Motors are ideal for compact, limited angular excursion ( <180 º), rotary, closed loop servo applications. Unlike conventional rotary brush and brushless motors, the torquers are wound in such a way that no commutation is required for motion to occur. [See More]
- Features: Torque Motor
- DC Construction: Toroidally Wound Iron Core; Permanent Magnet
- Motor Type: DC Motor
- Continuous Torque: 2.4
from H2W Technologies
H2W Technologies Limited Angle Torque Motors are ideal for compact, limited angular excursion ( <180 º), rotary, closed loop servo applications. Unlike conventional rotary brush and brushless motors, the torquers are wound in such a way that no commutation is required for motion to occur. [See More]
- Features: Torque Motor
- DC Construction: Toroidally Wound Iron Core; Permanent Magnet
- Motor Type: DC Motor
- Continuous Torque: 27.4
from H2W Technologies
H2W Technologies Limited Angle Torque Motors are ideal for compact, limited angular excursion ( <180 º), rotary, closed loop servo applications. Unlike conventional rotary brush and brushless motors, the torquers are wound in such a way that no commutation is required for motion to occur. [See More]
- Features: Torque Motor
- DC Construction: Toroidally Wound Iron Core; Permanent Magnet
- Motor Type: DC Motor
- Continuous Torque: 54.7
from H2W Technologies
H2W Technologies Limited Angle Torque Motors are ideal for compact, limited angular excursion ( <180 º), rotary, closed loop servo applications. Unlike conventional rotary brush and brushless motors, the torquers are wound in such a way that no commutation is required for motion to occur. [See More]
- Features: Torque Motor
- DC Construction: Toroidally Wound Iron Core; Permanent Magnet
- Motor Type: DC Motor
- Continuous Torque: 0.3