Thermocouple Data Acquisition Systems and Instruments
from AMETEK Programmable Power
48 thermocouple and voltage channels. Very high-performance thermocouple measurements, <0.3 ° C accuracy. Supports all thermocouple types. 10-34 V DC powered with extended temperature range for harsh testing in harsh environments. Built-in cold junction compensation, open transducer... [See More]
- Inputs: Thermocouple Input; RTD Input; Bridge Input
- Analog Channels: 48
from Dataforth Corporation
The SCM7BXEV (Figures 1 and 2) is a single channel backpanel that can accept any of the SCM7B analog modules. It is meant to be used primarily for module evaluation. Unlike multiple channel backpanels, the single high-level system output (or input) signal is routed to all channel pins on the system... [See More]
- Inputs: Thermocouple Input
- Form Factor: DIN Rail
- Analog Channels: 1
- Auxiliary Outputs: Analog Current Output
from AMETEK Programmable Power
Typical accuracies of ±0.20 °C. 16-channel isolated universal thermocouple/voltage inputs. Power over Ethernet+ (PoE+). 20K samples/second/channel sample rate. 24-bit ADC per channel. 500 V channel-ground isolation. 1000 V channel-channel isolation. Data logger acquisition mode. Built-in... [See More]
- Inputs: Thermocouple Input
- Isolation: Channel-to-Channel Isolation
- Analog Channels: 16
- Host Connection: Ethernet
from Dataforth Corporation
Dataforth Corporation's family of compact, dip-switch configurable DSCP signal converters includes seven different models, each housed in an ultra-slim 3.67" x 0.24" x 4.04" (93.1mm x 6.2mm x 102.5mm) DIN case. Designed for data acquisition, test/measurement, and control system applications, their... [See More]
- Inputs: Thermocouple Input
- Accuracy: 0.1000
- Analog Channels: 1
- Form Factor: DIN Rail
from Dataforth Corporation
The SCMPB01 16-channel backpanel (Figure 1) can accept any of the SCM5B analog modules in any mixture. It can be mounted on the SCMXRK-002 19-inch metal rack. The SCMPB01 has 16 non-addressable analog I/O signal channels which provides each module with it ’s own analog bus. The module output... [See More]
- Inputs: Thermocouple Input
- Form Factor: Rack Mount; DIN Rail
- Analog Channels: 1
- Auxiliary Outputs: Analog Current Output
from Dataforth Corporation
The SCMPB01 16-channel backpanel (Figure 1) can accept any of the SCM5B analog modules in any mixture. It can be mounted on the SCMXRK-002 19-inch metal rack. The SCMPB01 has 16 non-addressable analog I/O signal channels which provides each module with it ’s own analog bus. The module output... [See More]
- Inputs: Thermocouple Input
- Form Factor: Rack Mount; DIN Rail
- Analog Channels: 1
- Auxiliary Outputs: Analog Current Output
from Dataforth Corporation
The SCMPB01 16-channel backpanel (Figure 1) can accept any of the SCM5B analog modules in any mixture. It can be mounted on the SCMXRK-002 19-inch metal rack. The SCMPB01 has 16 non-addressable analog I/O signal channels which provides each module with it ’s own analog bus. The module output... [See More]
- Inputs: Thermocouple Input
- Form Factor: Rack Mount; DIN Rail
- Analog Channels: 1
- Auxiliary Outputs: Analog Current Output
from Dataforth Corporation
The SCMPB01 16-channel backpanel (Figure 1) can accept any of the SCM5B analog modules in any mixture. It can be mounted on the SCMXRK-002 19-inch metal rack. The SCMPB01 has 16 non-addressable analog I/O signal channels which provides each module with it ’s own analog bus. The module output... [See More]
- Inputs: Thermocouple Input
- Form Factor: Rack Mount; DIN Rail
- Analog Channels: 1
- Auxiliary Outputs: Analog Current Output
from Dataforth Corporation
The SCMPB01 16-channel backpanel (Figure 1) can accept any of the SCM5B analog modules in any mixture. It can be mounted on the SCMXRK-002 19-inch metal rack. The SCMPB01 has 16 non-addressable analog I/O signal channels which provides each module with it ’s own analog bus. The module output... [See More]
- Inputs: Thermocouple Input
- Form Factor: Rack Mount; DIN Rail
- Analog Channels: 1
- Auxiliary Outputs: Analog Current Output
from Dataforth Corporation
The SCMPB01 16-channel backpanel (Figure 1) can accept any of the SCM5B analog modules in any mixture. It can be mounted on the SCMXRK-002 19-inch metal rack. The SCMPB01 has 16 non-addressable analog I/O signal channels which provides each module with it ’s own analog bus. The module output... [See More]
- Inputs: Thermocouple Input
- Form Factor: Rack Mount; DIN Rail
- Analog Channels: 1
- Auxiliary Outputs: Analog Current Output
from Encore Electronics, Inc.
The Model FL424 is a dual-channel thermocouple conditioner with cold junction compensation for type K thermocouples. A version for type J is also available. Front panel offset and span adjustments are provided for calibration. The unit is mechanically and electrically compatible with Encore's other... [See More]
- Inputs: Thermocouple Input
- Auxiliary Outputs: Analog Voltage Output
- Form Factor: DIN Rail
- User Interface: None
from CAS DataLoggers
Description. The Novus LogBox 3G Cellular 2 Channel Data Logger. The LogBox 3G provides 2 universal analog inputs, 1 digital input and 1 digital output with an internal 3G wireless cellular modem and compatibility with the NOVUS Cloud web portal. The universal inputs accept thermocouples and RTD... [See More]
- Inputs: Thermocouple Input; RTD Input
- Digital I/O Channels: 1
- Analog Channels: 2
- Resolution: 15
from Kistler Group
Measurement module (DAQ) for thermocouples (Type B,E,J,K,L,N,R,S,T,U) and voltage.* Suitable for KiDAQ Data Acquisition system types Portable, Rack and DIN Rail. 8 analog input channels. Galvanic isolation 500 VDC. A/D conversion: 100 Sps sampling rate per channel, 24 Bit resolution [See More]
- Inputs: Thermocouple Input
- Sampling Frequency: 0.1000
- Analog Channels: 8
- Resolution: 24
from OMEGA Engineering, Inc.
The DP25B process meter accepts a wide variety of DC voltage and current inputs to cover any typical process application. Standard features include a full 4-digit three color (Red, Green, & Amber) programmable LED display, easy front panel scaling to virtually any engineering units, selectable... [See More]
- Inputs: Thermocouple Input; RTD Input; Bridge Input
- Sampling Frequency: 0.0030
- Analog Channels: 1
- Resolution: 15
from ACCES I/O Products, Inc.
Remote Intelligent Data Acquisition and Control System. Distributed Input/Output is commonly used to reduce installation cost, " home-run" wiring, and potential noise interference. REMOTE ACCES pods installed in RIDACS systems let you install interfaces and control outputs close to the sensors and... [See More]
- Inputs: Thermocouple Input; Thermistor Input; RTD Input; Bridge Input
- Digital I/O Channels: 8
- Analog Channels: 32
- Resolution: 12
from NorPix, Inc.
StreamPix is Norpix ’s flag ship software product. Resulting from more than 10 years of interaction with our vast group of customers, StreamPix has become the ultimate Digital Video Recording software. It offers a state of the art user interface, and an enormous amount of usage flexibility for... [See More]
- Inputs: Accelerometer Input; Thermocouple Input; Tach; Timer / Clock Input; Relay / Switch Input
- Differential Channels: Yes
- Analog Channels: 32
- Digital I/O Channels: 48
from Opto 22
The SNAP-AITM provides two channels of analog-to-digital conversion. Each channel can be configured for -150 to +150 mV DC or -75 to +75 mV DC, or for type E, J, or K thermocouple operation. Use isolated probes for thermocouple inputs. Although the two channels are not isolated from each other, the... [See More]
- Inputs: Thermocouple Input
- Sampling Frequency: 0.0060
- Analog Channels: 2
- Accuracy: 0.0600
from Encore Electronics, Inc.
The Model FL646 Thermocouple Isolation Amplifier conditions a millivolt input from a thermocouple temperature probe. The input is isolated from the output by up to 1000VDC. The unit is mechanically and electrically compatible with Encore's other Flexi-line DIN-rail mounted instrumentation. [See More]
- Inputs: Thermocouple Input
- Form Factor: DIN Rail
- Isolation: Isolated
- DC Voltage: +/-40mV DC
from CAS DataLoggers
The Loggito LAN Data Logger by Delphin proves that good things do indeed come in small packages! The Loggito is excellent for distributed monitoring systems, data acquisition with a low number of channels and other low power applications in a wide variety of industries. The Loggito can be used as a... [See More]
- Inputs: Thermocouple Input; RTD Input
- Digital I/O Channels: 8
- Analog Channels: 8
- Sampling Frequency: 1
from Kistler Group
Universal measurement module (DAQ) for voltage, current, resistance, potentiometer, resistance thermometer (Pt100, Pt1000), thermocouples (Type B,E,J,K,L,N,R,S,T,U), strain gauges, IEPE sensors (Piezotron) and status.* Suitable for KiDAQ Data Acquisition system types Portable, Rack and DIN Rail. 2... [See More]
- Inputs: Thermocouple Input; Bridge Input; IEPE Sensors
- Digital I/O Channels: 2
- Analog Channels: 2
- Sampling Frequency: 100
from OMEGA Engineering, Inc.
The new OMB-DAQ-3000 Series offers high-speed, multifunction data acquisition in a low-cost, portable package. The module offers synchronous and concurrent voltage input, temperature input, waveform output, counter input, quadrature encoder input, timer output and digital I/O. Everything needed to... [See More]
- Inputs: Thermocouple Input; Tach; Timer / Clock Input
- Differential Channels: Yes
- Analog Channels: 16
- Digital I/O Channels: 24
from Opto 22
The SNAP-AITM-8 provides eight channels of thermocouple or millivolt input. Each channel can be individually configured to accept a type B, C, D, E, G, J, K, N, R, S, or T thermocouple or a -75 to + 75 mV, -50 to +50 mV, or -25 to +25 mV input. Used with an Opto 22 SNAP PAC controller, the... [See More]
- Inputs: Thermocouple Input
- Sampling Frequency: 4.44E-4
- Analog Channels: 8
- Accuracy: 0.1000
from CAS DataLoggers
The CMK610-S concrete maturity kit contains the Squirrel OQ610-S logger, a bright yellow, heavy duty weatherproof case, and SquirrelView software. The OQ610-S logger has 6 temperature channels and digitally displays the value of all channels, and comes with type K extension leads. It can be... [See More]
- Inputs: Thermocouple Input
- Sampling Frequency: 0.0080
- Analog Channels: 6
- Data Logger: Datalogger
from Kistler Group
Universal measurement module (DAQ) for voltage, current, resistance, potentiometer, resistance thermometer (Pt100, Pt1000), thermocouples (Type B,E,J,K,L,N,R,S,T,U) and strain gauges.* Suitable for KiDAQ Data Acquisition system types Portable, Rack and DIN Rail. 4 analog input channels. Galvanic... [See More]
- Inputs: Thermocouple Input; Bridge Input
- Sampling Frequency: 20
- Analog Channels: 4
- Resolution: 24
from OMEGA Engineering, Inc.
Highly versatile, the DP3300 series is a dual input meter. The meter can either monitor two analog inputs or an analog input and a pulse input. On the analog channel, signals from thermocouples, RTD's, or thermistors are linearized and displayed in degrees Centigrade or Fahrenheit. Voltage and... [See More]
- Inputs: Thermocouple Input; Thermistor Input; RTD Input; Tach
- Form Factor: Panel / Chassis Mount
- Analog Channels: 2
- DC Voltage: 0 to 10 V
from Opto 22
The SNAP-AITM-8-FM provides eight channels of thermocouple or millivolt input. Each channel can be individually configured to accept a type B, C, D, E, G, J, K, N, R, S, or T thermocouple or a -75 to + 75 mV, -50 to +50 mV, or -25 to +25 mV input. Used with an Opto 22 SNAP PAC controller, the... [See More]
- Inputs: Thermocouple Input
- Sampling Frequency: 4.44E-4
- Analog Channels: 8
- Accuracy: 0.1000
from CAS DataLoggers
The Delphin ProfiMessage Data Acquisition System is a modular device for data acquisition and automation. A master/slave design makes ProfiMessage suitable for both small and large applications that require the processing of thousands of channels. Master and slave devices can each accommodate two... [See More]
- Inputs: Thermocouple Input
- Differential Channels: Yes
- Analog Channels: 15
- Sampling Frequency: 160
from OMEGA Engineering, Inc.
The OMB-DAQSCAN-2000 Series of Ethernet-based data acquisition system components provides analog, digital and frequency I/O capability for Ethernet-based test systems. All OMB-DAQSCAN-2000 models are packaged in a 1U high-full rack package and include a rack-mount kit that can attach to either the... [See More]
- Inputs: Thermocouple Input; Thermistor Input; RTD Input; Tach; Timer / Clock Input
- Differential Channels: Yes
- Analog Channels: 16
- Digital I/O Channels: 40
from Opto 22
The SNAP-AITM-2 provides two channels of analog input with a range of -50 to +50 mV, -25 to +25 mV, or type B,C,D,G,N,T,R, or S thermocouple. Use isolated probes for thermocouple inputs. Although the two channels are not isolated from each other, the module is transformer isolated and optically... [See More]
- Inputs: Thermocouple Input
- Sampling Frequency: 0.0060
- Analog Channels: 2
- Accuracy: 0.1000
from CAS DataLoggers
The Environmental Data Logger. The dataTaker DT82E is an intelligent data logger that was designed with environmental applications in mind. The DT82E is a robust, stand alone, low power data logger featuring USB memory stick support, 18 bit resolution, extensive communications capabilities and... [See More]
- Inputs: Thermocouple Input; Thermistor Input; RTD Input; Bridge Input; Tach; Monolithic Temperature Sensors
- Digital I/O Channels: 4
- Analog Channels: 6
- Sampling Frequency: 0.0250
from OMEGA Engineering, Inc.
bull;. High Accuracy Data Acquisition for Windows-Based Computers. •. 16 Single-Ended/8 Differential 14 Bit Analog Inputs, 8 Analog Outputs and 8 Digital I/O. •. Controller Card Includes 10 Counter/Timer Channels. •. Direct Connect to RTD, Thermocouple, Voltage, Thermistor, Bridge... [See More]
- Inputs: Thermocouple Input; Thermistor Input; RTD Input; Bridge Input
- Differential Channels: Yes
- Analog Channels: 16
- Digital I/O Channels: 8
from Opto 22
DescriptionSpecificationsDocumentsDownloads. T SNAP-AITM-i provides two isolated channels of analog-to-digital conversion. Each channel can be configured for -150 to +150 mV DC, or -75 to +75 mV DC, or for type E, J, or K thermocouple operation. In addition to having two channels isolated from each... [See More]
- Inputs: Thermocouple Input
- Accuracy: 0.0600
- Analog Channels: 2
- Isolation: Isolated
from CAS DataLoggers
Internal GSM Modem. The dataTaker DT82EM is an intelligent data logger that incorporates a built-in GSM modem with email and SMS support for automated data and alarm transfer from remote sites. The DT82EM features USB memory stick support, 18 bit resolution, extensive communications capabilities and... [See More]
- Inputs: Thermocouple Input; Thermistor Input; RTD Input; Bridge Input; Tach; Monolithic Temperature Sensors
- Digital I/O Channels: 4
- Analog Channels: 2
- Sampling Frequency: 0.0250
from OMEGA Engineering, Inc.
OMEGA introduces a new family of extremely accurate instruments for DIN rail mounting. The compact iDR Series signal conditioners and PID controllers are available with OMEGA's award-winning "embedded Internet" technology. With the Ethernet option, the instruments connect directly to a LAN and can... [See More]
- Inputs: Thermocouple Input; RTD Input; Bridge Input; Relay / Switch Input
- Isolation: Isolated Analog Voltage Output (optional feature); Isolated Digital Outputs (optional feature)
- Accuracy: 0.0300
- Form Factor: DIN Rail
from Opto 22
The SNAP-AITM2-i provides two isolated channels, each with an input range of -50 to +50 mV, -25 to +25 mV, or type B,C,D,G,N,T,R, or S thermocouple. In addition to having two channels isolated from each other, the module is also transformer isolated and optically isolated from other modules and... [See More]
- Inputs: Thermocouple Input
- Accuracy: 0.1000
- Analog Channels: 2
- Isolation: Isolated
from CAS DataLoggers
The Industrial Data Logger. The dataTaker DT82I was designed for industrial applications that focus on flexible serial type communications such as RS232, RS422 and RS485. The DT82i is a robust, stand alone, low power data logger featuring USB memory stick support, 18 bit resolution, extensive... [See More]
- Inputs: Thermocouple Input; Thermistor Input; RTD Input; Bridge Input; Tach; Monolithic Temperature Sensors
- Digital I/O Channels: 4
- Analog Channels: 6
- Sampling Frequency: 0.0250
from OMEGA Engineering, Inc.
The OMB-DAQTEMP-14A data acquisition card provides a total hardware/software/signal conditioning solution for highaccuracy, high speed temperature, voltage, frequency, and pulse counting measurements, plus digital I/O and analog output. A diversified software is included with the OMB-DAQTEMP-14A,... [See More]
- Inputs: Thermocouple Input; Tach; Timer / Clock Input
- Digital I/O Channels: 24
- Differential Channels: Yes
- Sampling Frequency: 200
from Opto 22
G4 Analog Type R Thermocouple Input [See More]
- Inputs: Thermocouple Input
- Resolution: 12
- Analog Channels: 1
- Isolation: Isolated
from CAS DataLoggers
A powerful portable data logger for everyday use. Flexible. Very easy to use. Economical. Handheld, ergonomic design. USB connectivity with PC. Ethernet or RS232 communications options available. Extended battery life for unattended logging. The lightweight, battery powered SQ2010 datalogger... [See More]
- Inputs: Thermocouple Input; Thermistor Input; RTD Input
- Differential Channels: Yes
- Analog Channels: 8
- Digital I/O Channels: 8
from OMEGA Engineering, Inc.
The DPS3000 Series Scanners monitor up to seven individual inputs. Each channel on the DPS3204 and DPS3207 can be programmed to accept different types of inputs, while the DPS3104 and DPS3107 are limited to one input type on all channels. Temperature is displayed in °C or °F, while voltage... [See More]
- Inputs: Thermocouple Input; Thermistor Input; RTD Input
- Form Factor: Panel / Chassis Mount
- Analog Channels: 7
- DC Voltage: 0 to 10 V
from Opto 22
Type S Thermocouple Input [See More]
- Inputs: Thermocouple Input
- Resolution: 12
- Analog Channels: 1
- Isolation: Isolated