DC Voltage Data Acquisition Systems and Instruments
from AMETEK Programmable Power
16-Channel isolated high voltage measurement instrument. 24-bit SAR ADC per Channel. 128k samples/second/channel sample rate. 1000V channel-channel isolation. 500V channel-ground isolation. Input voltage ranges peak: ±420V/ ±10V/ ±1V. Data logger acquisition mode. 3-Pin screw... [See More]
- Analog Channels: 16
- Isolation: Channel-to-Channel Isolation; Isolated Digital Inputs; Isolated Digital Outputs
- Data Logger: Datalogger
- Form Factor: Rack Mount
from Dataforth Corporation
The 8BP01 is offered as a 5VDC powered (8BP01-X05) or 7 to 34VDC powered (8BP01-X24) single channel DIN rail mount carrier suitable for any 8B signal conditioner. The 8B carrier can be mounted on any standard DIN rail (EN 50022-35 and EN 50035-G32). The 8BP01 measures only 2.32 ” x 3.54... [See More]
- Analog Channels: 0
- DC Voltage: 4.85-5.2VDC
- Form Factor: DIN Rail
- Auxiliary Outputs: Analog Current Output
from ABB Measurement & Analytics
The AWT420 transmitter can be used with either analog or digital EZLink sensors for a wide range of applications including drinking water, wastewater, industrial water and power. Operation simplicity is a key feature of the AWT420 with its powerful, yet intuitive software, advanced self-diagnostics... [See More]
- Analog Channels: 2
- Form Factor: Panel / Chassis Mount
- Isolation: Channel-to-Channel Isolation; Isolated Analog Voltage Input; Isolated Analog Voltage Output; Isolated Digital Inputs; Isolated Digital Outputs
- DC Voltage: 24 V
from AMETEK Programmable Power
48 thermocouple and voltage channels. Very high-performance thermocouple measurements, <0.3 ° C accuracy. Supports all thermocouple types. 10-34 V DC powered with extended temperature range for harsh testing in harsh environments. Built-in cold junction compensation, open transducer... [See More]
- Analog Channels: 48
- Inputs: Thermocouple Input; RTD Input; Bridge Input
from Dataforth Corporation
The 8BP01 is offered as a 5VDC powered (8BP01-X05) or 7 to 34VDC powered (8BP01-X24) single channel DIN rail mount carrier suitable for any 8B signal conditioner. The 8B carrier can be mounted on any standard DIN rail (EN 50022-35 and EN 50035-G32). The 8BP01 measures only 2.32 ” x 3.54... [See More]
- Analog Channels: 0
- DC Voltage: 4.85-5.2VDC
- Form Factor: DIN Rail
- Auxiliary Outputs: Analog Current Output
from AMETEK Programmable Power
Supports quarter-bridge (120, 350Oor user defined), half-bridge or full-bridge. 24-bit ADCs, sampling rates up to 25 kSa/s. Built in programmable differential excitation -8V to 8V. Built in selectable bridge completion. Configure signal conditioning excitation and bridge completion on a per channel... [See More]
- Analog Channels: 48
from Dataforth Corporation
The 8B isoLynx ® SLX300 - Dataforth's newly introduced data acquisition system - builds on the proven reliability and outstanding performance of the SCM5B isoLynx ® SLX200 and the miniature-sized SensorLex ® 8B isolated signal conditioning modules to provide a compact, low cost solution... [See More]
- Analog Channels: 12
- Sampling Frequency: 3
- Digital I/O Channels: 8
- Accuracy: 0.0700
from AMETEK Programmable Power
Typical accuracies of ±0.20 °C. 16-channel isolated universal thermocouple/voltage inputs. Power over Ethernet+ (PoE+). 20K samples/second/channel sample rate. 24-bit ADC per channel. 500 V channel-ground isolation. 1000 V channel-channel isolation. Data logger acquisition mode. Built-in... [See More]
- Analog Channels: 16
- Inputs: Thermocouple Input
- Isolation: Channel-to-Channel Isolation
- Host Connection: Ethernet
from AMETEK Programmable Power
24-bit, delta-sigma ADC, simultaneous sampling. Programmable Sample Rate up to 128kSPS. Full, Half & Quarter Bridge with 120 Ω, 350 Ω & 1k Ω bridge completion. Voltage Excitation: 0.5V to 10V. Current Excitation: 0.46mA. 2-Wire & 4-Wire Ohms/RTD. Bridge Zero Balancing. [See More]
- Analog Channels: 16
- Host Connection: Ethernet
- Inputs: RTD Input; Bridge Input
from Gantner Instruments, Inc.
Q.monixx is a new addition to the Q.series product family – the ideal edge computing and data logging solution for reliable process control and asset monitoring. The standard I/O configuration for the Q.monixx includes up to 8 universal analog inputs, 8 digital inputs, 4 digital outputs, 2... [See More]
- Analog Channels: 8
- Resolution: 24
- Digital I/O Channels: 14
- Data Logger: Datalogger
from Iwaki America and Walchem, IWAKI America Inc
WebAlert ® was developed to meet the increasing demands for improved operational efficiencies and enhancements to service programs that can be gained by continuous monitoring of remote equipment and systems. WebAlert ® seamlessly web-enables your installed equipment, providing local and... [See More]
- Analog Channels: 6
- Data Logger: Datalogger
- Digital I/O Channels: 6
- Form Factor: Panel / Chassis Mount
from Spectral Dynamics, Inc.
PUMA / COUGAR Vibration Control and Analysis System. Revolutionizing Vibration Testing. PUMA (Cougar for portability) utilizes Spectral Dynamics' innovative Computer-Aided Test Suite ™ (CATS) architecture. Both take full advantage of the PC's powerful Intel processor and Windows XP technology. [See More]
- Analog Channels: 32
- Digital I/O Channels: 52
- Differential Channels: Yes
- Sampling Frequency: 102
from Red Pitaya, d.o.o.
SDRlab 122-16 External clock is based on the SDRlab 122-16 model that is modified to be used with an external clock oscillator, which is important especially for RF applications that operate at other frequencies, require better quality clock or clock synchronization. [See More]
- Analog Channels: 6
- Digital I/O Channels: 16
- Differential Channels: Yes (optional feature)
- Sampling Frequency: 122880
from PMC Engineering LLC
This CAN Signal Acquisition Module integrates a high quality multi-channel data acquisition system, high performance Micro-controller (MCU) and CAN interface to provide access to external analog sensors via a Controller Area Network (CAN). The Module offers an array of configuration options in terms... [See More]
- Analog Channels: 8
- Resolution: 16
- Sampling Frequency: 1
- Form Factor: Stand-alone
from M.A.E. Apparecchiature Elettroniche srl
DL8M is the ideal solution for all environmental or structural monitoring in which high resolution, velocity of implementation and low costs of system management are required, together with the greatest simplicity in management and processing acquired data. DLM8 allows to briefly and easily realize... [See More]
- Analog Channels: 8
- Resolution: 24
- Differential Channels: Yes (optional feature)
- Data Logger: Datalogger
from Piezo-Metrics
Our flagship RTR-500 series has a solution for just about everyone. It includes a 13 different type loggers to meet measurement needs and 4 types of wireless base unit/data collectors to match your situation. Create the system you need and take advantage of our free of charge cloud based Web Storage... [See More]
- DC Voltage: 3V, Max 30V
- Web Enabled: Web Enabled
- Host Connection: Wi-Fi 802.11b/g
- Network Options: Wi-Fi 802.11b/g
from OMEGA Engineering, Inc.
The DP25B process meter accepts a wide variety of DC voltage and current inputs to cover any typical process application. Standard features include a full 4-digit three color (Red, Green, & Amber) programmable LED display, easy front panel scaling to virtually any engineering units, selectable... [See More]
- Analog Channels: 1
- Resolution: 15
- Sampling Frequency: 0.0030
- Isolation: Isolated Analog Voltage Output (optional feature); Isolated Analog Current Output
from LORD MicroStrain Sensing Systems
Downhole Orientation Sensor and Data Logger. Overview. The 3DM-DH3 ™ is a downhole orientation sensor and datalogger. It incorporates acceleration sensors, magnetic field sensors, and temperature sensors, together with an on-board microprocessor, embedded software algorithm, non-volatile... [See More]
- Resolution: 24
- Form Factor: PC Board
- Data Logger: Datalogger
- DC Voltage: 6-10 V
from ACCES I/O Products, Inc.
Features. High-speed USB 2.0 multifunction DAQ. Sustained sampling speeds up to 500kHz. 12 or 16-bit resolution A/D converter. Flexible, software configured functionality. High density, up to 128 single-ended or differential analog inputs. 18 input ranges, 9 unipolar and 9 bipolar, per 8-channel... [See More]
- Analog Channels: 128
- Digital I/O Channels: 16
- Differential Channels: Yes
- Sampling Frequency: 500
from CAS DataLoggers
Description. The Novus LogBox 3G Cellular 2 Channel Data Logger. The LogBox 3G provides 2 universal analog inputs, 1 digital input and 1 digital output with an internal 3G wireless cellular modem and compatibility with the NOVUS Cloud web portal. The universal inputs accept thermocouples and RTD... [See More]
- Analog Channels: 2
- Resolution: 15
- Digital I/O Channels: 1
- Data Logger: Datalogger
from Kistler Group
The Kistler LabAmp Type 5165A... is not only an outstanding low-noise charge amplifier for dynamic signals but also a powerful data acquisition device delivering the digitized measurement values directly to a host computer for further analysis. It is configured and operated in a web-interface,... [See More]
- Analog Channels: 4
- Resolution: 24
- Sampling Frequency: 200
- Isolation: Isolated Analog Voltage Output
from Diversified Technical Systems, Inc. (DTS)
SLICE is a revolutionary data acquisition system (DAS) with unmatched functionality in an unbelievably small size. Available in 2 configurations, the SLICE DAS offer flexibility, superior technology and reliable data recording solutions for mission critical test applications. The Base SLICE contains... [See More]
- Analog Channels: 3
- Sampling Frequency: 450
- Digital I/O Channels: 0
- Resolution: 16
from Encore Electronics, Inc.
The Model FL228 is a wide band, analog frequency. to voltage converter. It is a no frills unit with fixed frequency range and noise discrimination level. Externally-accessible trimpot controls allow adjustment of output offset and fullscale voltage. The unit is mechanically and electrically... [See More]
- Form Factor: DIN Rail
- Auxiliary Outputs: Analog Voltage Output
- DC Voltage: 0 To +/- 45 V Max
- User Interface: None
from Opto 22
The SNAP-AIMV-4 provides four channels of analog-to-digital conversion. Each channel can be configured for -150 mV DC to +150 mV DC or -75 mV DC to +75 mV DC. This module can be used with SNAP PAC brains and R-series controllers. It can also be used with legacy Ethernet-based brains. Although the... [See More]
- Analog Channels: 4
- Accuracy: 0.0600
- Sampling Frequency: 0.0030
- Isolation: Isolated Analog Voltage Input
from Elsys AG
The Elsys Data Acquisition Intrument TraNET EPC with its high channel density and robust housing is designed for highprecision measurements in industrial environments. It is a scalable system that may grow to a total number of 64 SE channels in one device. Several devices can be synchronized with... [See More]
- Analog Channels: 64
- Sampling Frequency: 240000
- Differential Channels: Yes
- Resolution: 16
from NorPix, Inc.
StreamPix is Norpix ’s flag ship software product. Resulting from more than 10 years of interaction with our vast group of customers, StreamPix has become the ultimate Digital Video Recording software. It offers a state of the art user interface, and an enormous amount of usage flexibility for... [See More]
- Analog Channels: 32
- Digital I/O Channels: 48
- Differential Channels: Yes
- Sampling Frequency: 1000
from Aries Engineering Co., Inc.
HyperView-Press ® Monitoring System provides the easiest to use, most comprehensive and highest reliability press monitoring available. With the most consistent test results and less false failures, the HyperView-Press ® will help you achieve your yield and quality objectives. Easy... [See More]
- Analog Channels: 4
- Resolution: 16
- Digital I/O Channels: 8
- Accuracy: 0.0150
from Spectral Dynamics, Inc.
JAGUAR Shaker Control and Analysis System. Powerful workstation-based system for large scale Shaker Control, signal analysis, and MIMO Shaker Control. Shaker Control. Jaguar provides a full suite of closed loop Shaker Control applications with up to 98 control channels and over 500 response... [See More]
- Analog Channels: 588
- Sampling Frequency: 102
- Digital I/O Channels: 0
- Resolution: 32
from Red Pitaya, d.o.o.
SDRlab 122-16 was developed specifically for software-defined radio and more demanding RF applications. [See More]
- Analog Channels: 6
- Digital I/O Channels: 16
- Differential Channels: Yes (optional feature)
- Sampling Frequency: 122880
from OMEGA Engineering, Inc.
The new OMB-DAQ-3000 Series offers high-speed, multifunction data acquisition in a low-cost, portable package. The module offers synchronous and concurrent voltage input, temperature input, waveform output, counter input, quadrature encoder input, timer output and digital I/O. Everything needed to... [See More]
- Analog Channels: 16
- Digital I/O Channels: 24
- Differential Channels: Yes
- Sampling Frequency: 10
from ACCES I/O Products, Inc.
Features. High-speed USB 2.0 multifunction DAQ, USB 3.0 and 1.1 compatible. Sustained sampling speeds up to 500kHz. 12 or 16-bit resolution A/D converter. Flexible, software configured functionality. 64 single-ended or 32 differential analog inputs. 8 input ranges, 4 unipolar and 4 bipolar, per... [See More]
- Analog Channels: 64
- Digital I/O Channels: 16
- Differential Channels: Yes
- Sampling Frequency: 500
from CAS DataLoggers
CAS is pleased to announce the new ADwin-X-A20 compact data acquisition and control system. It features a high performance, dual-core, 64-bit processor plus analog and digital inputs and outputs and a 1GB Ethernet communications interface to provide extremely precise, low latency real-time... [See More]
- Analog Channels: 8
- Digital I/O Channels: 8
- Differential Channels: Yes
- Sampling Frequency: 1000
from Kistler Group
Measurement module (DAQ) for IEPE sensors (Piezotron) and voltage. Suitable for KiDAQ Data Acquisition system types Portable, Rack and DIN Rail. 4 analog input channels. Galvanic isolation 500 VDC. A/D conversion: 100 kSps sampling rate per channel, 24 Bit resolution [See More]
- Analog Channels: 4
- Resolution: 24
- Sampling Frequency: 100
- Accuracy: 0.0100
from Diversified Technical Systems, Inc. (DTS)
Each TDAS G5 DAS module is a completely independent data acquisition system that can be used stand alone or linked together to create large test set-ups. Each module is available in 32-channel and 24-channel versions with options for greatly expanded memory. Also, DTS has added High Bandwidth... [See More]
- Analog Channels: 32
- Digital I/O Channels: 32
- Differential Channels: Yes
- Sampling Frequency: 3200
from Encore Electronics, Inc.
The Model 619M is a low cost differential amplifier useful in test environments where high CMRR is desired. Encore's Model 227. F/V converter can also be used in the six-module 4015-111 rack. An. AC power supply is built into the rack, and provides the required unregulated DC voltages to operate the... [See More]
- Form Factor: Rack Mount
- User Interface: Front Panel
- DC Voltage: +/- 10 V Max
- Filter / Amplifier: Amplifier; Filter
from Opto 22
The SNAP-AIMV2-4 provides four channels of analog-to-digital conversion. Each channel can be configured for -50 mV DC to +50 mV DC or -25 mV DC to +25 mV DC. This module can be used with SNAP PAC brains and R-series controllers. It can also be used with legacy Ethernet-based brains. [See More]
- Analog Channels: 4
- Accuracy: 0.1000
- Sampling Frequency: 0.0030
- Isolation: Isolated Analog Voltage Input
from Elsys AG
The TraNET FE ’s are a compact and portable data acquisition instruments and Transient Recorders for many different applications. Key Capabilities: Up to 16-channels SE, 8-channels differential. Stand alone operation for remote unattended capture of elusive signals. Remote control over TCP/IP... [See More]
- Analog Channels: 16
- Sampling Frequency: 240000
- Differential Channels: Yes
- Resolution: 16
from Spectral Dynamics, Inc.
PUMA / COUGAR Vibration Control and Analysis System. Revolutionizing Vibration Testing. PUMA (Cougar for portability) utilizes Spectral Dynamics' innovative Computer-Aided Test Suite ™ (CATS) architecture. Both take full advantage of the PC's powerful Intel processor and Windows XP technology. [See More]
- Analog Channels: 32
- Digital I/O Channels: 52
- Differential Channels: Yes
- Sampling Frequency: 102
from Red Pitaya, d.o.o.
SIGNALlab 250-12 is most sophisticated Red Pitaya product, built for more demanding industrial applications and research, where robustness and performance matter more than cost. [See More]
- Analog Channels: 6
- Digital I/O Channels: 16
- Differential Channels: Yes (optional feature)
- Sampling Frequency: 250000
from OMEGA Engineering, Inc.
The PT-104A is a four-channel, high-resolution temperature data acquisition module for use with PT100 and PT1000 RTD sensors. It can also be used to measure resistance (375 Ω and 10,000 Ω ranges) and voltage (115 mV or 2.5 V ranges). In PT100/PT1000/ resistance mode, the unit uses a four... [See More]
- Analog Channels: 4
- Form Factor: DIN Rail
- Differential Channels: Yes (optional feature)
- DC Voltage: 115mV or 2.5V
from ACCES I/O Products, Inc.
Features. Remote intelligent analog and digital I/O unit with opto-isolated RS-485 serial interface to host computer. Eight differential or sixteen single-ended analog inputs, programmable gain and offset on a channel-by-channel basis, 12-bit resolution A/D converter. Programmable gains provide... [See More]
- Analog Channels: 16
- Digital I/O Channels: 7
- Differential Channels: Yes
- Resolution: 12
from CAS DataLoggers
The Loggito LAN Data Logger by Delphin proves that good things do indeed come in small packages! The Loggito is excellent for distributed monitoring systems, data acquisition with a low number of channels and other low power applications in a wide variety of industries. The Loggito can be used as a... [See More]
- Analog Channels: 8
- Sampling Frequency: 1
- Digital I/O Channels: 8
- Resolution: 24
from Kistler Group
Measurement module (DAQ) for voltage (till 100 V), current and status.* Suitable for KiDAQ Data Acquisition system types Portable, Rack and DIN Rail. 8 analog and 2 digital input channels. Galvanic isolation 500 VDC. A/D conversion: 20 kSps sampling rate per channel, 24 Bit resolution. Voltage... [See More]
- Analog Channels: 8
- Sampling Frequency: 20
- Digital I/O Channels: 2
- Resolution: 24
from Encore Electronics, Inc.
The Model FL651 Differential Amplifier is a minimal-feature fixed gain amplifier module. Differential input signals up to ±10V are buffered to the output terminal. The unit is mechanically and electrically compatible with Encore's other Flexi-line DIN-rail mounted instrumentation. [See More]
- Form Factor: DIN Rail
- Auxiliary Outputs: Analog Voltage Output
- DC Voltage: +/- 10 V Peak
- User Interface: None
from Opto 22
The SNAP-AITM provides two channels of analog-to-digital conversion. Each channel can be configured for -150 to +150 mV DC or -75 to +75 mV DC, or for type E, J, or K thermocouple operation. Use isolated probes for thermocouple inputs. Although the two channels are not isolated from each other, the... [See More]
- Analog Channels: 2
- Accuracy: 0.0600
- Sampling Frequency: 0.0060
- Isolation: Isolated Analog Voltage Input
from Elsys AG
The TraNET PPC is a powerful and portable data acquisition instruments and Transient Recorders for many different applications. Key Capabilities: Portable turnkey Data Acquisition System. LCD Size: 17 ”. Up to 24-channels SE,. Remote control over TCP/IP protocol. Windows 7/8 or 10 installed. [See More]
- Analog Channels: 24
- Sampling Frequency: 240000
- Differential Channels: Yes
- Resolution: 16
from Red Pitaya, d.o.o.
SIGNALlab 250-12 is most sophisticated Red Pitaya product, built for more demanding industrial applications and research, where robustness and performance matter more than cost. [See More]
- Analog Channels: 6
- Digital I/O Channels: 16
- Differential Channels: Yes (optional feature)
- Sampling Frequency: 250000
from OMEGA Engineering, Inc.
Highly versatile, the DP3300 series is a dual input meter. The meter can either monitor two analog inputs or an analog input and a pulse input. On the analog channel, signals from thermocouples, RTD's, or thermistors are linearized and displayed in degrees Centigrade or Fahrenheit. Voltage and... [See More]
- Analog Channels: 2
- DC Voltage: 0 to 10 V
- Form Factor: Panel / Chassis Mount
- DC Current: 4 to 20 mA
from ACCES I/O Products, Inc.
Remote Intelligent Data Acquisition and Control System. Distributed Input/Output is commonly used to reduce installation cost, " home-run" wiring, and potential noise interference. REMOTE ACCES pods installed in RIDACS systems let you install interfaces and control outputs close to the sensors and... [See More]
- Analog Channels: 32
- Resolution: 12
- Digital I/O Channels: 8
- Isolation: Opto-Isolated RS-485 Serial Interface to Host Computer
from CAS DataLoggers
The Delphin ProfiMessage Data Acquisition System is a modular device for data acquisition and automation. A master/slave design makes ProfiMessage suitable for both small and large applications that require the processing of thousands of channels. Master and slave devices can each accommodate two... [See More]
- Analog Channels: 15
- Sampling Frequency: 160
- Differential Channels: Yes
- Resolution: 24
from Kistler Group
Measurement module (DAQ) for voltage, current and status.* Suitable for KiDAQ Data Acquisition system types Portable, Rack and DIN Rail. 8 analog and 2 digital input channels. Galvanic isolation 500 VDC. A/D conversion: 20 kSps sampling rate per channel, 24 Bit resolution [See More]
- Analog Channels: 8
- Sampling Frequency: 20
- Digital I/O Channels: 2
- Resolution: 24
from Encore Electronics, Inc.
The Model FL644 Isolation Amplifier is available in several versions, offering either gain or attenuation of an input signal. In all versions, the input is isolated from the output by up to 1000VDC. The unit is mechanically and electrically compatible with Encore's other Flexi-line DIN-rail mounted... [See More]
- Isolation: Isolated
- DC Voltage: 0-1000 V DC
- Form Factor: DIN Rail
- User Interface: None
from Opto 22
The SNAP-AITM-8 provides eight channels of thermocouple or millivolt input. Each channel can be individually configured to accept a type B, C, D, E, G, J, K, N, R, S, or T thermocouple or a -75 to + 75 mV, -50 to +50 mV, or -25 to +25 mV input. Used with an Opto 22 SNAP PAC controller, the... [See More]
- Analog Channels: 8
- Accuracy: 0.1000
- Sampling Frequency: 4.44E-4
- Isolation: Isolated Analog Voltage Input
from Red Pitaya, d.o.o.
STEMlab 125-14 4 Inputs is based on STEMlab 125-14 board, but instead of 2 inputs and 2 output channels offers 4 Input channels that with improved performance. [See More]
- Analog Channels: 8
- Digital I/O Channels: 20
- Differential Channels: Yes (optional feature)
- Sampling Frequency: 125000
from OMEGA Engineering, Inc.
The OMEGA® iSD environmental monitor provides Web-based remote surveillance of environmental conditions in critical HVAC applications such as computer server rooms, clean rooms, laboratories, museums, warehouses, or any remote facility. View and record Temperature, Relative Humidity and Dew Point... [See More]
- Data Logger: Datalogger
- DC Voltage: 9 - 12 V
- Form Factor: Panel / Chassis Mount
- Auxiliary Outputs: Relay Output
from CAS DataLoggers
The DC-3VA two channel data logger is specifically designed to accurately monitor one or two DC voltage channels, 1V to 300Vdc and one DC current channel, allowing you to monitor PV (photovoltaic) cell output, DC charger performance, as well as many other applications - like DC motors. The stored... [See More]
- Analog Channels: 3
- Accuracy: 1
- Resolution: 10
- Data Logger: Datalogger
from Kistler Group
Universal measurement module (DAQ) for voltage, current, resistance, potentiometer, resistance thermometer (Pt100, Pt1000), thermocouples (Type B,E,J,K,L,N,R,S,T,U), strain gauges, IEPE sensors (Piezotron) and status.* Suitable for KiDAQ Data Acquisition system types Portable, Rack and DIN Rail. 2... [See More]
- Analog Channels: 2
- Sampling Frequency: 100
- Digital I/O Channels: 2
- Resolution: 24
from Encore Electronics, Inc.
The Model 663 is a combination amplifier and integrator for accelerometer signals. One integration stage is provided, converting acceleration into velocity. The unity gain frequency of the integrator is factor-trimmed to 60Hz. Two outputs are provided per accelerometer –a buffered copy of the... [See More]
- Form Factor: Rack Mount
- Auxiliary Outputs: Analog Voltage Output
- DC Voltage: 0 To +/- 10 V Max
- User Interface: None
from Opto 22
The SNAP-AITM-8-FM provides eight channels of thermocouple or millivolt input. Each channel can be individually configured to accept a type B, C, D, E, G, J, K, N, R, S, or T thermocouple or a -75 to + 75 mV, -50 to +50 mV, or -25 to +25 mV input. Used with an Opto 22 SNAP PAC controller, the... [See More]
- Analog Channels: 8
- Accuracy: 0.1000
- Sampling Frequency: 4.44E-4
- Isolation: Isolated Analog Voltage Input
from Red Pitaya, d.o.o.
STEMlab 125-14 is our most versatile and popular product, which was introduced to the market in 2013 when Red Pitaya was established. Since then it has been used in a wide variety of contexts, from hobbyists and ham radio operators to industry, research, and space applications. [See More]
- Analog Channels: 6
- Digital I/O Channels: 16
- Differential Channels: Yes (optional feature)
- Sampling Frequency: 125000
from OMEGA Engineering, Inc.
The OMB-DAQSCAN-2000 Series of Ethernet-based data acquisition system components provides analog, digital and frequency I/O capability for Ethernet-based test systems. All OMB-DAQSCAN-2000 models are packaged in a 1U high-full rack package and include a rack-mount kit that can attach to either the... [See More]
- Analog Channels: 16
- Digital I/O Channels: 40
- Differential Channels: Yes
- Sampling Frequency: 200
from CAS DataLoggers
The Environmental Data Logger. The dataTaker DT82E is an intelligent data logger that was designed with environmental applications in mind. The DT82E is a robust, stand alone, low power data logger featuring USB memory stick support, 18 bit resolution, extensive communications capabilities and... [See More]
- Analog Channels: 6
- Sampling Frequency: 0.0250
- Digital I/O Channels: 4
- Resolution: 18
from Kistler Group
Universal measurement module (DAQ) for voltage, current, resistance, potentiometer, resistance thermometer (Pt100, Pt1000), thermocouples (Type B,E,J,K,L,N,R,S,T,U) and strain gauges.* Suitable for KiDAQ Data Acquisition system types Portable, Rack and DIN Rail. 4 analog input channels. Galvanic... [See More]
- Analog Channels: 4
- Resolution: 24
- Sampling Frequency: 20
- Accuracy: 0.0100
from Encore Electronics, Inc.
The Model FL646 Thermocouple Isolation Amplifier conditions a millivolt input from a thermocouple temperature probe. The input is isolated from the output by up to 1000VDC. The unit is mechanically and electrically compatible with Encore's other Flexi-line DIN-rail mounted instrumentation. [See More]
- Isolation: Isolated
- DC Voltage: +/-40mV DC
- Form Factor: DIN Rail
- Inputs: Thermocouple Input
from Opto 22
The SNAP-AIV provides two channels of analog voltage input, either -10 to +10 VDC or -5 to +5 VDC. Although the two channels are not isolated from each other, the module is transformer isolated and optically isolated from other modules and devices. Modules are factory calibrated. [See More]
- Analog Channels: 2
- Accuracy: 0.0500
- Sampling Frequency: 0.0870
- Isolation: Isolated Analog Voltage Input
from Red Pitaya, d.o.o.
STEMlab 125-14 is our most versatile and popular product, which was introduced to the market in 2013 when Red Pitaya was established. Since then it has been used in wide variety of contexts, from hobbyists and ham radio operators to industry, research and space applications. [See More]
- Analog Channels: 6
- Digital I/O Channels: 16
- Differential Channels: Yes (optional feature)
- Sampling Frequency: 125000
from OMEGA Engineering, Inc.
bull;. High Accuracy Data Acquisition for Windows-Based Computers. •. 16 Single-Ended/8 Differential 14 Bit Analog Inputs, 8 Analog Outputs and 8 Digital I/O. •. Controller Card Includes 10 Counter/Timer Channels. •. Direct Connect to RTD, Thermocouple, Voltage, Thermistor, Bridge... [See More]
- Analog Channels: 16
- Digital I/O Channels: 8
- Differential Channels: Yes
- Sampling Frequency: 166
from CAS DataLoggers
Internal GSM Modem. The dataTaker DT82EM is an intelligent data logger that incorporates a built-in GSM modem with email and SMS support for automated data and alarm transfer from remote sites. The DT82EM features USB memory stick support, 18 bit resolution, extensive communications capabilities and... [See More]
- Analog Channels: 2
- Sampling Frequency: 0.0250
- Digital I/O Channels: 4
- Resolution: 18
from Encore Electronics, Inc.
The Model FL230 is a voltage-controlled oscillator, producing 0-5V output pulses at a frequency proportional to a voltage or current input signal. Accuracy is within ±0.25% from 5% to 110% fullscale input. For the FL230-005, the operating range is -0.6V to +3.4V, allowing operation at zero... [See More]
- Form Factor: DIN Rail
- Auxiliary Outputs: Frequency or Pulse Output
- DC Voltage: 0-10 V
- User Interface: None
from Opto 22
The SNAP-AIV-32 analog input module provides 32 channels of analog voltage input. Each channel can be configured for -10 to +10 VDC or -5 to +5 VDC operation. Although the 32 channels are not isolated from each other, the module is transformer isolated and optically isolated from other modules and... [See More]
- Analog Channels: 32
- Accuracy: 0.0500
- Sampling Frequency: 9.09E-4
- Isolation: Isolated Analog Voltage Input
from Red Pitaya, d.o.o.
STEMlab 125-14 Edu Pack is based on Red Pitaya's best-selling DAQ platform and with the chosen accessories a perfect fit for educational purposes. [See More]
- Analog Channels: 6
- Digital I/O Channels: 16
- Differential Channels: Yes (optional feature)
- Sampling Frequency: 125000
from OMEGA Engineering, Inc.
OMEGA introduces a new family of extremely accurate instruments for DIN rail mounting. The compact iDR Series signal conditioners and PID controllers are available with OMEGA's award-winning "embedded Internet" technology. With the Ethernet option, the instruments connect directly to a LAN and can... [See More]
- Accuracy: 0.0300
- Form Factor: DIN Rail
- Isolation: Isolated Analog Voltage Output (optional feature); Isolated Digital Outputs (optional feature)
- DC Voltage: 0-10 V
from CAS DataLoggers
The Industrial Data Logger. The dataTaker DT82I was designed for industrial applications that focus on flexible serial type communications such as RS232, RS422 and RS485. The DT82i is a robust, stand alone, low power data logger featuring USB memory stick support, 18 bit resolution, extensive... [See More]
- Analog Channels: 6
- Sampling Frequency: 0.0250
- Digital I/O Channels: 4
- Resolution: 18
from Opto 22
The SNAP-AIV-32-FM analog input module provides 32 channels of analog voltage input. Each channel can be configured for -10 to +10 VDC or -5 to +5 VDC operation. Although the 32 channels are not isolated from each other, the module is transformer isolated and optically isolated from other modules... [See More]
- Analog Channels: 32
- Accuracy: 0.0500
- Sampling Frequency: 9.09E-4
- Isolation: Isolated Analog Voltage Input
from Red Pitaya, d.o.o.
STEMlab 125-14 External clock is based on the STEMlab 125-14 model that is modified to be used with an external clock oscillator, which is important especially for RF applications that operate at other frequencies, require better quality clock or clock synchronization. With this modification, users... [See More]
- Analog Channels: 6
- Digital I/O Channels: 16
- Differential Channels: Yes (optional feature)
- Sampling Frequency: 125000
from OMEGA Engineering, Inc.
The OMEGA ® OM2 modular signal conditioning system provides a low cost, versatile method of interconnecting a variety of analog signals for measurement and control systems. The OM2 modules interface directly with sensors or analog signals such as strain gages, mV, thermocouples and RTD ’s. [See More]
- Form Factor: DIN Rail
- Auxiliary Outputs: Analog Voltage Output
- Inputs: Bridge Input
- User Interface: None
from CAS DataLoggers
A powerful portable data logger for everyday use. Flexible. Very easy to use. Economical. Handheld, ergonomic design. USB connectivity with PC. Ethernet or RS232 communications options available. Extended battery life for unattended logging. The lightweight, battery powered SQ2010 datalogger... [See More]
- Analog Channels: 8
- Digital I/O Channels: 8
- Differential Channels: Yes
- Resolution: 24
from Opto 22
The SNAP-AIV-4 provides four channels of analog voltage input. Each channel can be configured for -10 to +10 VDC or -5 to +5 VDC operation. Although the four channels are not isolated from each other, the module is transformer isolated and optically isolated from other modules and devices. This... [See More]
- Analog Channels: 4
- Accuracy: 0.0500
- Sampling Frequency: 0.0435
- Isolation: Isolated Analog Voltage Input
from Red Pitaya, d.o.o.
Based on the STEMlab 125-14 Starter kit and it comes with individual ISO17025 certificate. [See More]
- Analog Channels: 6
- Digital I/O Channels: 16
- Differential Channels: Yes (optional feature)
- Sampling Frequency: 125000
from OMEGA Engineering, Inc.
The OMB-DAQTEMP-14A data acquisition card provides a total hardware/software/signal conditioning solution for highaccuracy, high speed temperature, voltage, frequency, and pulse counting measurements, plus digital I/O and analog output. A diversified software is included with the OMB-DAQTEMP-14A,... [See More]
- Differential Channels: Yes
- Sampling Frequency: 200
- Digital I/O Channels: 24
- Resolution: 16
from CAS DataLoggers
Powerful data loggers for standard and high speed applications. Up to 20 Max readings per second on 1 channel. Fully configurable via the integrated keypad. 128*97 dot graphical LCD display. Compatible with B, C, D type thermocouples. Up to 16 universal inputs. High precision (0.05%). Advanced data... [See More]
- Analog Channels: 16
- Digital I/O Channels: 8
- Differential Channels: Yes
- Sampling Frequency: 0.1000
from Opto 22
The SNAP-AIV-8 provides eight channels of analog voltage input. Each channel can be configured for -10 to +10 VDC or -5 to +5 VDC operation. Although the eight channels are not isolated from each other, the module is transformer isolated and optically isolated from other modules and devices. [See More]
- Analog Channels: 8
- Accuracy: 0.0500
- Sampling Frequency: 0.0036
- Isolation: Isolated Analog Voltage Input
from Red Pitaya, d.o.o.
STEMlab 125-14 Low Noise Bare OEM is the ultimate solution for customization and adaptability in your electronic project. This board, which comes without the usual connectors, provides unparalleled freedom and versatility to tailor your designs according to your specific needs. [See More]
- Analog Channels: 6
- Digital I/O Channels: 16
- Differential Channels: Yes (optional feature)
- Sampling Frequency: 125000
from OMEGA Engineering, Inc.
The easy-to-use DP3600 series meters can be user-programmed to work with a wide variety of pressure, flow and force transducers. Keys are appropriately labeled to eliminate any user guess work. All features such as limits, timers, display modes, setpoint, time-base etc. are totally programmable from... [See More]
- Analog Channels: 1
- DC Voltage: 0 to 10 V
- Form Factor: Panel / Chassis Mount
- DC Current: 4 to 20 mA
from CAS DataLoggers
Powerful data loggers for standard and high speed applications. Up to 100 readings per second on 2 channels. In-built Ethernet connectivity. Up to four 3 or 4 wire Pt 100/1000 sensor inputs. Fully configurable via the integrated keypad - New!. 128*97 dot graphical LCD display - New!. Compatible with... [See More]
- Analog Channels: 16
- Digital I/O Channels: 8
- Differential Channels: Yes
- Sampling Frequency: 0.1000
from Opto 22
The SNAP-AIVRMS provides two channels of 0-250 V AC or DC analog input. It may be used to monitor 120/240-volt AC/DC and 12/24/48-volt AC/DC system voltage. Although the two channels are not isolated from each other, the module is transformer isolated and optically isolated from other modules and... [See More]
- Analog Channels: 2
- Accuracy: 0.2000
- Sampling Frequency: 0.0310
- Isolation: Isolated Analog Voltage Input