Threaded Studs
from PennEngineering®
Stainless Steel Stud with Base Plate - Metric [See More]
- Attachment: Threaded
- Length: 0.3937
- Shape: Round
- Material: Stainless Steel
from bisco industries
Concealed Head Studs [See More]
- Attachment: Threaded
- Inch: # 10
- Design Units: English
- Material: Aluminum
from Jergens, Inc.
With one of the largest selections available, Jergens Workholding Components have everything you need to design and build fixtures, jigs, and other workholding devices. Features, Benefits, & Product Specifications: Material: Stressproof ® Steel. Finish: Black Oxide. Tensile: 125,000 PSI... [See More]
- Attachment: Threaded
- Design Units: English
- Shape: Round
- Inch: 1/4"; 1/4-20
from PennEngineering®
The new IFH ™ Stud is the first ingress protection fastener from PEM ® that creates a watertight seal and meets ISO: 20653-2014 and IPX7 and IPX9K standards for ingress protection. This new flush-head, self clinching stud is redesigned for maximum material flow into the stud undercut... [See More]
- Attachment: Threaded
- Design Units: Metric
- Shape: Round
- Metric: M 2.5; M3; M4; M5; M6
from bisco industries
Panel Nuts [See More]
- Attachment: Threaded
- Inch: # 10
- Design Units: English
- Material: Steel
from Jergens, Inc.
With one of the largest selections available, Jergens Workholding Components have everything you need to design and build fixtures, jigs, and other workholding devices. Features, Benefits, & Product Specifications: Material: 303 Stainless Steel [See More]
- Attachment: Threaded
- Design Units: English
- Shape: Round
- Inch: # 10; 10-32
from PennEngineering®
Features and Benefits: Enlarged head diameter reduces stress on panel. Thicker head allows for larger hole in attached panels. Clinch design provides high-strength in sheets as thin as .031" / 0.8 mm. Recommended for use in steel or aluminum sheets HRB (Rockwell "B" Scale) 85 or less and HB... [See More]
- Attachment: Threaded
- Design Units: English
- Shape: Round
- Inch: 1/4"
from bisco industries
Self-Clinching Studs [See More]
- Attachment: Threaded
- Metric: 5 mm x 10.6
- Design Units: Metric
- Material: Steel
from Jergens, Inc.
With one of the largest selections available, Jergens Workholding Components have everything you need to design and build fixtures, jigs, and other workholding devices. Features, Benefits, & Product Specifications: Material: 303 Stainless Steel [See More]
- Attachment: Threaded
- Design Units: English
- Shape: Round
- Inch: 1/2"; 1/2-13
from bisco industries
Self-Clinching Studs [See More]
- Attachment: Threaded
- Metric: M5; M5 x 0.8
- Design Units: Metric
- Material: Steel
from bisco industries
Self-Clinching Studs [See More]
- Attachment: Threaded
- Inch: # 10
- Design Units: English
- Material: Steel
from bisco industries
Self-Clinching Studs [See More]
- Attachment: Threaded
- Inch: # 10
- Design Units: English
- Material: Steel
from bisco industries
Swage Collar Studs [See More]
- Attachment: Threaded
- Inch: # 10
- Design Units: English
- Material: Stainless Steel
from bisco industries
Threaded Broaching Studs [See More]
- Attachment: Threaded
- Inch: 1/4"
- Design Units: English
- Material: Steel
from bisco industries
Threaded Rods and Studs [See More]
- Attachment: Threaded
- Inch: # 10
- Design Units: English
- Material: Steel
from bisco industries
Threaded Rods and Studs [See More]
- Attachment: Threaded
- Inch: # 10
- Design Units: English
- Material: Stainless Steel
from bisco industries
Threaded Rods and Studs [See More]
- Attachment: Threaded
- Inch: # 10
- Design Units: English
- Material: Steel
from bisco industries
Threaded Rods and Studs [See More]
- Attachment: Threaded
- Inch: # 10
- Design Units: English
- Material: Bronze
from bisco industries
Threaded Rods and Studs [See More]
- Attachment: Threaded
- Inch: # 10
- Design Units: English
- Material: Steel
from Chief Enterprises LLC
Stud,Pass-Thru,3/8"-16,RED [See More]
- Attachment: Threaded
- Inch: 3/8"
- Design Units: English
from Tri-Star Industries, Inc.
Threaded studs are commonly used to fulfill specific design functions, to save money in production costs, to function as electrical contacts or to replace self-tapping or removable screws. Thread lengths are available to meet your specific requirements. Special studs without threads can be used as... [See More]
- Attachment: Threaded
- Design Units: English; Metric
- Shape: Round
- Inch: # 2; # 4; # 6; # 8; # 10; 1/4"; 5/16"; 3/8"
from LCSC Electronics Technology (HK) Limited
- 100 pcs per bag internal threaded hex stud ROHS [See More]
- Attachment: Threaded
- Shape: Hex
from CORE Manufacturing
100% Domestic Melt and Manufacture, Made in USA, Certified. Double End, Single End, TFL, Shear Stud, Forged Stud, Driving Stud, Shoulder Stud, Tapered Stud. Dimensions: CORE-STD, Customer Drawing/Requirements. Stocking Sizes: 1/4 ” (M6) through 5 ” (M75) Nominal Diameter. Stocking... [See More]
- Attachment: Pressed; Threaded
- Design Units: English; Metric
- Shape: Round
- Inch: Stocking Sizes: 1/4” through 5” Nominal Diameter
from Bayou City Bolt & Supply Co., Inc.
All thread rods and studs are used for general purpose fastening for anything from an anchor bolt to a through bolt. A variety of grades and materials are available including stainless steel. Threaded rod is available in a variety of strengths. Low carbon all thread and studs are usually provided in... [See More]
- Attachment: Threaded
- Design Units: English
- Shape: Round
- Inch: # 0000; # 000; # 00; # 0; # 1; # 2; # 3; # 4; # 5; # 6; # 7; # 8; # 9; # 10; # 12; # 14; 1/4"; # 16; # 18; 5/16"; # 20; # 24; 3/8"; 7/16"; 1/2"; 5/8"; 3/4"; 7/8"; 1"; 1 1/8"; 1 1/4"; 1 3/8"; 1 1/2"; 1 3/4"; 2"; 2 1/4"; 2 1/2"; 2 3/4"; 3"; As Specified
from TFC Ltd.
The SCH range of studs provide a flush head finish in materials as thin as 1.0mm whilst giving a high level of torque-out and push-out performance. Material: SCH - Carbon steel, heat treated. SCHS - 300 Series Stainless steel. SCHA - 2024 - T4 Aluminium. Finish: SCH - Zinc, spec. ASTMB 633-85. SCHS... [See More]
- Attachment: Threaded
- Material: Aluminum; Steel; Stainless Steel
- Design Units: Metric
- Finish: Zinc Plated
from Xiamen Landee Industries Co., Ltd.
Stud Bolts and Nuts with Cadmium/Teflon-plated Surface, Made of A193 B7/A194 2H. Model Number: LD-026-SB-2. Key Specifications/Special Features: Materials: A193 B7/A194 2H, A193 B7M/A194 2HM, A320 L7/A194 7 and A320 L7M/A194 7M. Surface finish: cadmium and teflon-plated. Standards: ANSI/ASME. Size:... [See More]
- Attachment: Threaded
- Inch: 1/4" (optional feature); # 16 (optional feature); # 18 (optional feature); 5/16" (optional feature); # 20 (optional feature); # 24 (optional feature); 3/8" (optional feature); 7/16" (optional feature); 1/2" (optional feature); 5/8" (optional feature); 3/4" (optional feature); 7/8" (optional feature); 1" (optional feature); 1 1/8" (optional feature); 1 1/4" (optional feature); 1 3/8" (optional feature); 1 1/2" (optional feature); 1 3/4" (optional feature); 2" (optional feature); 2 1/4" (optional feature); 2 1/2" (optional feature); 2 3/4" (optional feature); 3" (optional feature); 2/4" - 4"
- Design Units: English (optional feature)
- Length: ? to 20
from Southern Stud Weld, Inc.
Pitch Diameter is one of the most common types of standard drawn arc weld studs. The pitch diameter is not fully threaded. The weld base is slightly larger than full thread arc studs, giving the studs a higher shear value. The pitch diameter is best suited when the mating part covers the unthreaded... [See More]
- Attachment: Welded; Threaded
- Design Units: English
- Shape: Round
- Inch: .215" - .913"
from Elgin Fastener Group
Studs. Special double-ended, continuous threaded, projection weld, or center hex studs. Tell us your configuration requirements and we'll produce studs to the most demanding dimensions. Configurations are available in either inch or metric sizes. Size Ranges: Diameters: 3/16" to and including 7/8"... [See More]
- Attachment: Threaded
- Design Units: English
- Shape: Round
- Inch: # 10; # 12; # 14; 1/4"; # 16; # 18; 5/16"; # 20; # 24; 3/8"; 7/16"; 1/2"; 5/8"; 3/4"
from Dyson Corporation (The)
Custom, Double End Studs. Thread Diameters - 0.5" to 20" [See More]
- Attachment: Threaded
- Design Units: English
- Shape: Round
- Inch: 1/2" (optional feature); 5/8" (optional feature); 3/4" (optional feature); 7/8" (optional feature); 1" (optional feature); 1 1/8" (optional feature); 1 1/4" (optional feature); 1 3/8" (optional feature); 1 1/2" (optional feature); 1 3/4" (optional feature); 2" (optional feature); 2 1/4" (optional feature); 2 1/2" (optional feature); 2 3/4" (optional feature); 3" (optional feature); 1/2" to 20"
from Viair Corporation
1/4" NPT Male [See More]
- Attachment: Threaded
- Design Units: English
- Shape: Round
- Inch: 1/4"
from Strongwell Corporation
FIBREBOLT ® consists of a pultruded stud with threads cut in a glass mat reinforced outer layer (the center of the stud is unidirectionally reinforced for high strength) and a molded nut. FIBREBOLT ® does not possess the thread shear strength of steel, but has sufficient strength to be a... [See More]
- Attachment: Threaded
- Shape: Hex
from Carr Lane Manufacturing Co.
High-strength general-purpose Clamping Stud, for use with a T Nut, or for installation directly into a fixture plate. Available in steel or stainless steel. [See More]
- Attachment: Threaded
- Design Units: English (optional feature); Metric (optional feature)
- Shape: Round
- Inch: 1/4" (optional feature); 5/16" (optional feature); 3/8" (optional feature); 1/2" (optional feature); 5/8" (optional feature); 3/4" (optional feature); 7/8" (optional feature); 1" (optional feature)
from LCSC Electronics Technology (HK) Limited
- internal threaded hex stud ROHS [See More]
- Attachment: Threaded
- Shape: Hex
from TFC Ltd.
SHCHH high torque studs have a heavy head configuration that provides greater torque-out and improved pull-through resistance. Material: SHCHH - Medium Carbon steel, Heat treated. SHCHHS - 300 Series Stainless steel. SHCHHB - Phosphor Bronze CDA-510. Finish: SHCHH - Zinc (ASTM B633-85) Clear. SHCHHS... [See More]
- Attachment: Threaded
- Material: Bronze; Steel; Stainless Steel
- Design Units: Metric
- Finish: Zinc Plated
from Xiamen Landee Industries Co., Ltd.
Stud Bolts and Nuts with Sizes Range of 1/4 - 4 Inches. Model Number: LD-022-BN. Key Specifications/Special Features: Standard: ANSI/ASME. Size: from 1/4-inch to 4 inches (Length to 20 inches max.). Material: A193 B7/A194 2H; A193 B7M/A194 2HM; A320 L7/A194 7; A320 L7M/A194 7M. Surface: black,... [See More]
- Attachment: Threaded
- Design Units: English (optional feature)
- Shape: Round
- Inch: 1/4" (optional feature); # 16 (optional feature); # 18 (optional feature); 5/16" (optional feature); # 20 (optional feature); # 24 (optional feature); 3/8" (optional feature); 7/16" (optional feature); 1/2" (optional feature); 5/8" (optional feature); 3/4" (optional feature); 7/8" (optional feature); 1" (optional feature); 1 1/8" (optional feature); 1 1/4" (optional feature); 1 3/8" (optional feature); 1 1/2" (optional feature); 1 3/4" (optional feature); 2" (optional feature); 2 1/4" (optional feature); 2 1/2" (optional feature); 2 3/4" (optional feature); 3" (optional feature); 2/4" - 4"
from Southern Stud Weld, Inc.
Capacitor Discharge Studs are available in many different sizes, from a base diameter of a #2 stud up to 3/8" , and from a length of 1/4" up to 3". Standard material for CD Studs are: Low Carbon Copper Flashed Steel, Stainless Steel, Aluminum Alloy, and Brass. External threads adhere to the UNC-2A... [See More]
- Attachment: Welded; Threaded
- Design Units: English
- Shape: Round
- Inch: # 2; # 3; # 4; # 5; # 6; # 7; # 8; # 9; # 10; # 12; # 14; 1/4"; # 16; # 18; 5/16"; # 20; # 24; 3/8"; #2 - .375"
from Elgin Fastener Group
Collared Studs. All threaded studs are available with knurl and/or collars. The threads and combinations given here are Ohio Rod Products standards. Others are available on request. [See More]
- Attachment: Threaded
- Design Units: English
- Shape: Round
- Inch: # 4; # 5; # 6; # 7; # 8; # 9; # 10; # 12; # 14; 1/4"; # 16; # 18; 5/16"; # 20; # 24; 3/8"; 7/16"; 1/2"; 5/8"
from Dyson Corporation (The)
Custom, Tap End Studs. Thread Diameters - 0.5" to 20" [See More]
- Attachment: Threaded
- Design Units: English
- Shape: Round
- Inch: 1/2" (optional feature); 5/8" (optional feature); 3/4" (optional feature); 7/8" (optional feature); 1" (optional feature); 1 1/8" (optional feature); 1 1/4" (optional feature); 1 3/8" (optional feature); 1 1/2" (optional feature); 1 3/4" (optional feature); 2" (optional feature); 2 1/4" (optional feature); 2 1/2" (optional feature); 2 3/4" (optional feature); 3" (optional feature); 1/2" to 20"
from Viair Corporation
1/4" NPT Female [See More]
- Attachment: Threaded
- Design Units: English
- Shape: Round
- Inch: 1/4"
from Carr Lane Manufacturing Co.
Fixture Studs have a thread-locking interference thread at the bottom end to install permanently in a fixture plate. These small sizes are designed specifically for mini-size stainless clamp straps. [See More]
- Attachment: Threaded
- Design Units: English
- Shape: Round
- Inch: # 10 (optional feature); 1/4" (optional feature); 5/16" (optional feature); 3/8" (optional feature)
from LCSC Electronics Technology (HK) Limited
- internal threaded hex stud ROHS [See More]
- Attachment: Threaded
- Shape: Hex
from TFC Ltd.
STCH non flush studs are maunfactured for use in sheets as thin as 0.5mm (.020in.) thick. The push-out and torque-out values are excellent for most applications. The head of the stud will project above the panel surface when installed correctly. Material: STCH - Carbon steel, heat treated. STCHS -... [See More]
- Attachment: Threaded
- Material: Steel; Stainless Steel
- Design Units: Metric
- Finish: Zinc Plated
from Xiamen Landee Industries Co., Ltd.
China All-Thread Stud and Nut Manufacturer Landee Provides ASTM A193, ASTM A194 2H Stud, with Hex Nuts, Blue XYLan 1014 Finish, Size 1 1/8 Inch. [See More]
- Attachment: Threaded
- Design Units: English
- Shape: Round
- Inch: 1 1/8"
from Elgin Fastener Group
Ladder Rods. General Information. Material: Pre-galvanized Wire, Low Carbon Steel. Type of Head: Truss, Indented Hex Washer. Thread Diameters: 10-24 through 1/4-20. Length: To a maximum of 52". Length of Thread: 4" maximum. Wire Diameter: .160 through .250. [See More]
- Attachment: Threaded
- Design Units: English
- Shape: Round
- Inch: # 8; # 9; # 10
from Dyson Corporation (The)
Upset Threaded Rods. Threaded Rods are also supplied as multiple unit rods connected with Turnbuckles, Clevises or Sleeve Nuts in any desired length, plus plate washers to customer specifications. To protect the thread ends for shipment it is recommended to have the rods fitted with necessary... [See More]
- Attachment: Threaded
- Design Units: English
- Shape: Round
- Inch: 1/2" (optional feature); 5/8" (optional feature); 3/4" (optional feature); 7/8" (optional feature); 1" (optional feature); 1 1/8" (optional feature); 1 1/4" (optional feature); 1 3/8" (optional feature); 1 1/2" (optional feature); 1 3/4" (optional feature); 2" (optional feature); 2 1/4" (optional feature); 2 1/2" (optional feature); 2 3/4" (optional feature); 3" (optional feature); 1/2" to 20"
from LCSC Electronics Technology (HK) Limited
- internal threaded hex stud ROHS [See More]
- Attachment: Threaded
- Shape: Hex
from TFC Ltd.
Industry standard length Studs, complete with a nut and washer and stud end cut at 45o with hexagon drive. [See More]
- Attachment: Threaded
- Shape: Hex
from Xiamen Landee Industries Co., Ltd.
Carriage Bolts Sized from 1/4 to 4 Inches, Meet ANSI/ASME Standards. Model Number: LD-026-SB. Key Specifications/Special Features: Standards: ANSI/ASME. Size: from 1/4 to 4 inches (length to 20-inch max). Materials: A193 B7/A194 2H; A193 B7M/A194 2HM; A320 L7/A194 7; A320 L7M/A194 7M. Surface:... [See More]
- Attachment: Threaded
- Inch: 1/4" (optional feature); # 16 (optional feature); # 18 (optional feature); 5/16" (optional feature); # 20 (optional feature); # 24 (optional feature); 3/8" (optional feature); 7/16" (optional feature); 1/2" (optional feature); 5/8" (optional feature); 3/4" (optional feature); 7/8" (optional feature); 1" (optional feature); 1 1/8" (optional feature); 1 1/4" (optional feature); 1 3/8" (optional feature); 1 1/2" (optional feature); 1 3/4" (optional feature); 2" (optional feature); 2 1/4" (optional feature); 2 1/2" (optional feature); 2 3/4" (optional feature); 3" (optional feature); 2/4" - 4"
- Design Units: English (optional feature)
- Length: ? to 20
from Elgin Fastener Group
Projection Weld Studs. Our projection weld studs truly are a specialized part, produced specifically for customer requirements as defined by part number and print. They are normally supplied in weldable grades of low carbon steel or corrosive resistant steel, with a naturally bright unplated tumbled... [See More]
- Attachment: Welded; Threaded
- Design Units: English
- Shape: Round
- Inch: # 8; # 9; # 10; # 12; # 14; 1/4"; # 16; # 18; 5/16"; # 20; # 24; 3/8"; 7/16"; 1/2"; 5/8"
from LCSC Electronics Technology (HK) Limited
- internal threaded hex stud ROHS [See More]
- Attachment: Threaded
- Design Units: Metric
- Shape: Hex
- Metric: M3
from TFC Ltd.
Industry standard length Studs, complete with a nut and washer and stud end cut at 45o with hexagon drive. [See More]
- Attachment: Threaded
from Xiamen Landee Industries Co., Ltd.
Double End Stud Bolt with Teflon-plated Surface, Available in Different Sizes. Model Number: LD-021-SB. Key Specifications/Special Features: Standard: ANSI/ASME. Size: from 1/4 to 4 inches (M8 to M48). Materials: A193 B7/A194 2H, A193 B7M/A194 2HM, A193 B8/A194 8, A193 B8M/A194 8M, A193 B16/A194... [See More]
- Attachment: Threaded
- Design Units: English (optional feature); Metric (optional feature)
- Shape: Round
- Inch: 1/4" (optional feature); # 16 (optional feature); # 18 (optional feature); 5/16" (optional feature); # 20 (optional feature); # 24 (optional feature); 3/8" (optional feature); 7/16" (optional feature); 1/2" (optional feature); 5/8" (optional feature); 3/4" (optional feature); 7/8" (optional feature); 1" (optional feature); 1 1/8" (optional feature); 1 1/4" (optional feature); 1 3/8" (optional feature); 1 1/2" (optional feature); 1 3/4" (optional feature); 2" (optional feature); 2 1/4" (optional feature); 2 1/2" (optional feature); 2 3/4" (optional feature); 3" (optional feature); 1/4"-4"
from LCSC Electronics Technology (HK) Limited
- internal threaded hex stud ROHS [See More]
- Attachment: Threaded
- Design Units: Metric
- Shape: Hex
- Metric: M3
from Xiamen Landee Industries Co., Ltd.
Eye Bolts from 1/4 to 4 Inches (M8 - M48). Model Number:LD-025-EB. Key Specifications/Special Features: Standard: ANSI/ASME. Size: from 1/4 to 4 inches (M8 - M48). Material:A193 B7/A194 2H; A193 B7M/A194 2HM; A193 B8/A194 8; A193 B8M/A194 8M;A193 B16/A194 4/7; A320 L7/A194 4/7; A320 L7M/A194 7M. [See More]
- Attachment: Threaded
- Design Units: English (optional feature); Metric (optional feature)
- Shape: Round; Eye Bolt
- Inch: 1/4" (optional feature); # 16 (optional feature); # 18 (optional feature); 5/16" (optional feature); # 20 (optional feature); # 24 (optional feature); 3/8" (optional feature); 7/16" (optional feature); 1/2" (optional feature); 5/8" (optional feature); 3/4" (optional feature); 7/8" (optional feature); 1" (optional feature); 1 1/8" (optional feature); 1 1/4" (optional feature); 1 3/8" (optional feature); 1 1/2" (optional feature); 1 3/4" (optional feature); 2" (optional feature); 2 1/4" (optional feature); 2 1/2" (optional feature); 2 3/4" (optional feature); 3" (optional feature); 2/4" - 4"
from LCSC Electronics Technology (HK) Limited
- internal threaded hex stud ROHS [See More]
- Attachment: Threaded
- Shape: Hex
from Xiamen Landee Industries Co., Ltd.
Hexagon Bolts with Optional Plating, from 1/4 to 4 Inches (M8 - M48). Model Number:LD-025-HB. Key Specifications/Special Features: Standard: ANSI/ASME. Size: from 1/4-inch to 4-inch (M8 - M48). Material:A193 B7/A194 2H; A193 B7M/A194 2HM; A193 B8/A194 8; A193 B8M/A194 8M;A193 B16/A194 4/7; A320... [See More]
- Attachment: Threaded
- Design Units: English (optional feature); Metric (optional feature)
- Shape: Hex
- Inch: 1/4" (optional feature); # 16 (optional feature); # 18 (optional feature); 5/16" (optional feature); # 20 (optional feature); # 24 (optional feature); 3/8" (optional feature); 7/16" (optional feature); 1/2" (optional feature); 5/8" (optional feature); 3/4" (optional feature); 7/8" (optional feature); 1" (optional feature); 1 1/8" (optional feature); 1 1/4" (optional feature); 1 3/8" (optional feature); 1 1/2" (optional feature); 1 3/4" (optional feature); 2" (optional feature); 2 1/4" (optional feature); 2 1/2" (optional feature); 2 3/4" (optional feature); 3" (optional feature); 2/4" - 4"
from LCSC Electronics Technology (HK) Limited
- internal threaded hex stud ROHS [See More]
- Attachment: Threaded
- Design Units: Metric
- Shape: Hex
- Metric: M3
from Xiamen Landee Industries Co., Ltd.
Special Stud Bolts, Made of A193 B7/A194 2H Materials. Model Number:LD-025-SB3. Key Specifications/Special Features: Standard: ANSI/ASME. Size: from 1/4 to 4 inches (M8 to M48). Material:A193 B7/A194 2H; A193 B7M/A194 2HM; A193 B8/A194 8; A193 B8M/A194 8M;A193 B16/A194 4/7; A320 L7/A194 4/7; A320... [See More]
- Attachment: Threaded
- Design Units: English (optional feature); Metric (optional feature)
- Shape: Round
- Inch: 1/4" (optional feature); # 16 (optional feature); # 18 (optional feature); 5/16" (optional feature); # 20 (optional feature); # 24 (optional feature); 3/8" (optional feature); 7/16" (optional feature); 1/2" (optional feature); 5/8" (optional feature); 3/4" (optional feature); 7/8" (optional feature); 1" (optional feature); 1 1/8" (optional feature); 1 1/4" (optional feature); 1 3/8" (optional feature); 1 1/2" (optional feature); 1 3/4" (optional feature); 2" (optional feature); 2 1/4" (optional feature); 2 1/2" (optional feature); 2 3/4" (optional feature); 3" (optional feature); 2/4" - 4"
from LCSC Electronics Technology (HK) Limited
- internal threaded hex stud ROHS [See More]
- Attachment: Threaded
- Design Units: Metric
- Shape: Hex
- Metric: M3
from Xiamen Landee Industries Co., Ltd.
Stud Bolts, Available in Different Sizes. Model Number: LD-025-SB5. Key Specifications/Special Features: Standard: ANSI/ASME. Size: from 1/4 to 4-inch (M8 to M48). Materials:A193 B7/A194 2H, A193 B7M/A194 2HM, A193 B8/A194 8, A193 B8M/A194 8M,A193 B16/A194 4/7, A320 L7/A194 4/7, A320 L7M/A194 7M. [See More]
- Attachment: Threaded
- Design Units: English (optional feature); Metric (optional feature)
- Shape: Round
- Inch: 1/4" (optional feature); # 16 (optional feature); # 18 (optional feature); 5/16" (optional feature); # 20 (optional feature); # 24 (optional feature); 3/8" (optional feature); 7/16" (optional feature); 1/2" (optional feature); 5/8" (optional feature); 3/4" (optional feature); 7/8" (optional feature); 1" (optional feature); 1 1/8" (optional feature); 1 1/4" (optional feature); 1 3/8" (optional feature); 1 1/2" (optional feature); 1 3/4" (optional feature); 2" (optional feature); 2 1/4" (optional feature); 2 1/2" (optional feature); 2 3/4" (optional feature); 3" (optional feature); 2/4" - 4"
from LCSC Electronics Technology (HK) Limited
- internal threaded hex stud ROHS [See More]
- Attachment: Threaded
- Shape: Hex
from Xiamen Landee Industries Co., Ltd.
Stud Nuts and Bolts with A193 B7/A194 Material, Available in Different Sizes. Model Number: LD-023-BN-PTFE1. Key Specifications/Special Features: Material: A193 B7/A194 2H; A193 B7M/A194 2HM; A320 L7/A194 7; A320 L7M/A194 7M. Surface: black; cadmium plated; TEFLON plated. Sizes: from 1/4 inch to 4... [See More]
- Attachment: Threaded
- Design Units: English (optional feature)
- Shape: Round
- Inch: 1/4" (optional feature); # 16 (optional feature); # 18 (optional feature); 5/16" (optional feature); # 20 (optional feature); # 24 (optional feature); 3/8" (optional feature); 7/16" (optional feature); 1/2" (optional feature); 5/8" (optional feature); 3/4" (optional feature); 7/8" (optional feature); 1" (optional feature); 1 1/8" (optional feature); 1 1/4" (optional feature); 1 3/8" (optional feature); 1 1/2" (optional feature); 1 3/4" (optional feature); 2" (optional feature); 2 1/4" (optional feature); 2 1/2" (optional feature); 2 3/4" (optional feature); 3" (optional feature); 2/4" - 4"
from LCSC Electronics Technology (HK) Limited
- internal threaded hex stud ROHS [See More]
- Attachment: Threaded
- Shape: Hex
from Xiamen Landee Industries Co., Ltd.
TEFLON plated Stud Bolts and Nuts with Teflon-plated Surface Finish, Available in Black. Model Number: LD-023-BN-PTFE2. Key Specifications/Special Features: Materials: A193 B7/A194 2H, A193 B7M/A194 2HM, A320 L7/A194 7 and A320 L7M/A194 7M. Surface finish: cadmium and teflon-plated. Standards:... [See More]
- Attachment: Threaded
- Design Units: English (optional feature)
- Shape: Round
- Inch: 1/4" (optional feature); # 16 (optional feature); # 18 (optional feature); 5/16" (optional feature); # 20 (optional feature); # 24 (optional feature); 3/8" (optional feature); 7/16" (optional feature); 1/2" (optional feature); 5/8" (optional feature); 3/4" (optional feature); 7/8" (optional feature); 1" (optional feature); 1 1/8" (optional feature); 1 1/4" (optional feature); 1 3/8" (optional feature); 1 1/2" (optional feature); 1 3/4" (optional feature); 2" (optional feature); 2 1/4" (optional feature); 2 1/2" (optional feature); 2 3/4" (optional feature); 3" (optional feature); 2/4" - 4"
from LCSC Electronics Technology (HK) Limited
- internal threaded hex stud ROHS [See More]
- Attachment: Threaded
- Shape: Hex
from Xiamen Landee Industries Co., Ltd.
Stud Nuts and Bolts with A193 B7/A194 Material, Available in Different Sizes. Model Number: LD-023-BN-PTFE3. Key Specifications/Special Features: Material: A193 B7/A194 2H; A193 B7M/A194 2HM; A320 L7/A194 7; A320 L7M/A194 7M. Surface: black; cadmium plated; TEFLON plated. Sizes: from 1/4 inch to 4... [See More]
- Attachment: Threaded
- Design Units: English (optional feature)
- Shape: Round
- Inch: 1/4" (optional feature); # 16 (optional feature); # 18 (optional feature); 5/16" (optional feature); # 20 (optional feature); # 24 (optional feature); 3/8" (optional feature); 7/16" (optional feature); 1/2" (optional feature); 5/8" (optional feature); 3/4" (optional feature); 7/8" (optional feature); 1" (optional feature); 1 1/8" (optional feature); 1 1/4" (optional feature); 1 3/8" (optional feature); 1 1/2" (optional feature); 1 3/4" (optional feature); 2" (optional feature); 2 1/4" (optional feature); 2 1/2" (optional feature); 2 3/4" (optional feature); 3" (optional feature); 2/4" - 4"
from LCSC Electronics Technology (HK) Limited
- internal threaded hex stud ROHS [See More]
- Attachment: Threaded
- Shape: Hex
from Xiamen Landee Industries Co., Ltd.
Thread Bar, Made of A193 B7M/A194 2HM Material. Model Number: LD-025-SB1. Key Specifications/Special Features: Standard: ANSI/ASME. Size: from 1/4 to 4 inches (M8 to M48). Materials:A193 B7/A194 2H, A193 B7M/A194 2HM, A193 B8/A194 8, A193 B8M/A194 8M,A193 B16/A194 4/7, A320 L7/A194 4/7, A320... [See More]
- Attachment: Threaded
- Design Units: English (optional feature); Metric (optional feature)
- Shape: Round
- Inch: 1/4" (optional feature); # 16 (optional feature); # 18 (optional feature); 5/16" (optional feature); # 20 (optional feature); # 24 (optional feature); 3/8" (optional feature); 7/16" (optional feature); 1/2" (optional feature); 5/8" (optional feature); 3/4" (optional feature); 7/8" (optional feature); 1" (optional feature); 1 1/8" (optional feature); 1 1/4" (optional feature); 1 3/8" (optional feature); 1 1/2" (optional feature); 1 3/4" (optional feature); 2" (optional feature); 2 1/4" (optional feature); 2 1/2" (optional feature); 2 3/4" (optional feature); 3" (optional feature); 2/4" - 4"
from LCSC Electronics Technology (HK) Limited
- internal threaded hex stud ROHS [See More]
- Attachment: Threaded
- Shape: Hex
from Xiamen Landee Industries Co., Ltd.
Thread Bar, Made of A193 B7/A194 2H Material. Model Number: LD-025-SB2. Key Specifications/Special Features: Standard: ANSI/ASME. Size: from 1/4 to 4 inches (M8 to M48). Materials:A193 B7/A194 2H, A193 B7M/A194 2HM, A193 B8/A194 8, A193 B8M/A194 8M,A193 B16/A194 4/7, A320 L7/A194 4/7, A320 L7M/A194... [See More]
- Attachment: Threaded
- Design Units: English (optional feature); Metric (optional feature)
- Shape: Round
- Inch: 1/4" (optional feature); # 16 (optional feature); # 18 (optional feature); 5/16" (optional feature); # 20 (optional feature); # 24 (optional feature); 3/8" (optional feature); 7/16" (optional feature); 1/2" (optional feature); 5/8" (optional feature); 3/4" (optional feature); 7/8" (optional feature); 1" (optional feature); 1 1/8" (optional feature); 1 1/4" (optional feature); 1 3/8" (optional feature); 1 1/2" (optional feature); 1 3/4" (optional feature); 2" (optional feature); 2 1/4" (optional feature); 2 1/2" (optional feature); 2 3/4" (optional feature); 3" (optional feature); 2/4" - 4"
from LCSC Electronics Technology (HK) Limited
- internal threaded hex stud ROHS [See More]
- Attachment: Threaded
- Shape: Hex
from Xiamen Landee Industries Co., Ltd.
Thread Bar with Black Galvanized Surface. Model Number: LD-025-SB4. Key Specifications/Special Features: Standard: ANSI/ASME. Size: from 1/4 to 4 inches (M8 to M48). Material:A193 B7/A194 2H; A193 B7M/A194 2HM; A193 B8/A194 8; A193 B8M/A194 8M;A193 B16/A194 4/7; A320 L7/A194 4/7; A320 L7M/A194 7M. [See More]
- Attachment: Threaded
- Design Units: English (optional feature); Metric (optional feature)
- Shape: Round
- Inch: 1/4" (optional feature); # 16 (optional feature); # 18 (optional feature); 5/16" (optional feature); # 20 (optional feature); # 24 (optional feature); 3/8" (optional feature); 7/16" (optional feature); 1/2" (optional feature); 5/8" (optional feature); 3/4" (optional feature); 7/8" (optional feature); 1" (optional feature); 1 1/8" (optional feature); 1 1/4" (optional feature); 1 3/8" (optional feature); 1 1/2" (optional feature); 1 3/4" (optional feature); 2" (optional feature); 2 1/4" (optional feature); 2 1/2" (optional feature); 2 3/4" (optional feature); 3" (optional feature); 2/4" - 4"
from LCSC Electronics Technology (HK) Limited
- internal threaded hex stud ROHS [See More]
- Attachment: Threaded
- Shape: Hex
from Xiamen Landee Industries Co., Ltd.
Thread Bar in Optional Materials, from 1/4 to 4 Inches (M8 - M48). Model Number:LD-025-SB. Key Specifications/Special Features: Standard: ANSI/ASME. Size: from 1/4 to 4 inches (M8 - M48). Material:A193 B7/A194 2H; A193 B7M/A194 2HM; A193 B8/A194 8; A193 B8M/A194 8M;A193 B16/A194 4/7; A320 L7/A194... [See More]
- Attachment: Threaded
- Design Units: English (optional feature); Metric (optional feature)
- Shape: Round
- Inch: 1/4" (optional feature); # 16 (optional feature); # 18 (optional feature); 5/16" (optional feature); # 20 (optional feature); # 24 (optional feature); 3/8" (optional feature); 7/16" (optional feature); 1/2" (optional feature); 5/8" (optional feature); 3/4" (optional feature); 7/8" (optional feature); 1" (optional feature); 1 1/8" (optional feature); 1 1/4" (optional feature); 1 3/8" (optional feature); 1 1/2" (optional feature); 1 3/4" (optional feature); 2" (optional feature); 2 1/4" (optional feature); 2 1/2" (optional feature); 2 3/4" (optional feature); 3" (optional feature); 2/4" - 4"
from LCSC Electronics Technology (HK) Limited
- internal threaded hex stud ROHS [See More]
- Attachment: Threaded
- Shape: Hex
from LCSC Electronics Technology (HK) Limited
- internal threaded hex stud ROHS [See More]
- Attachment: Threaded
- Shape: Hex
from LCSC Electronics Technology (HK) Limited
- internal threaded hex stud ROHS [See More]
- Attachment: Threaded
- Shape: Hex
from LCSC Electronics Technology (HK) Limited
- internal threaded hex stud ROHS [See More]
- Attachment: Threaded
- Shape: Hex
from LCSC Electronics Technology (HK) Limited
- internal threaded hex stud ROHS [See More]
- Attachment: Threaded
- Shape: Hex
from LCSC Electronics Technology (HK) Limited
- internal threaded hex stud ROHS [See More]
- Attachment: Threaded
- Shape: Hex
from LCSC Electronics Technology (HK) Limited
- internal threaded hex stud ROHS [See More]
- Attachment: Threaded
- Shape: Hex
from LCSC Electronics Technology (HK) Limited
- internal threaded hex stud ROHS [See More]
- Attachment: Threaded
- Shape: Hex
from LCSC Electronics Technology (HK) Limited
- internal threaded hex stud ROHS [See More]
- Attachment: Threaded
- Shape: Hex