Non-corrosive Cure Industrial Sealants
from ELANTAS North America LLC
ELANTAS PDG, Inc., founded in 1919 and based in St. Louis, Missouri, is a premier global supplier of specialty resins for applications in the electrical and electronic industries. ELANTAS Electrical Insulation companies are respected as the market leaders in the development and manufacturing of wire... [See More]
- Features: High Dielectric; Non-corrosive; Gap Filler, Foam in Place Gasket
- Composition: Filled
- Chemical System: Epoxy
- Cure / Technology: Thermoset; Two Component
from Master Bond, Inc.
MasterSil 157 is a two part system for potting, encapsulation and sealing applications. This optically clear formulation features a low index of refraction and excellent light transmittance. Highly flexible, it is capable of withstanding the most rigorous thermal cycling and mechanical shock. These... [See More]
- Features: High Dielectric; Encapsulant, Potting Compound; Flexible; Leveling Filling; Non-corrosive; Phase Change; Gap Filler, Foam in Place Gasket; Thermally Conductive
- Composition: Unfilled
- Chemical System: Silicone
- Cure / Technology: Thermoset; Two Component ; Room Temperature Vulcanizing or Curing; Addition Cure
from Master Bond, Inc.
EP36FR is a one component, high performance epoxy that meets the Airbus standards from ABD0031, Issue F, June 8, 2005 for flame retardancy. It is used in all kinds of aircraft applications where protection is needed from flames, smoke and materials that might burn. [See More]
- Features: High Dielectric; Encapsulant, Potting Compound; Encapsulant or Conformal Coating; Flexible; Flame Retardant; Leveling Filling; Non-corrosive; Gap Filler, Foam in Place Gasket; Thermally Conductive
- Composition: Unfilled
- Chemical System: Epoxy
- Cure / Technology: Thermoset; Single Component
from Master Bond, Inc.
One part, nano silica filled UV22DC80-10F has the ability to cure in shadowed out areas. It features a UV and heat curing mechanism. Some noteworthy properties include optical clarity, excellent dimensional stability and outstanding physical strength. [See More]
- Features: High Dielectric; Encapsulant, Potting Compound; Encapsulant or Conformal Coating; Glob Top, Daub, Doming or Overfill; Leveling Filling; Non-corrosive; Phase Change; Thermally Conductive
- Cure / Technology: UV or Radiation Cured; Single Component; Dual Curing
- Composition: Filled
- Type / Form: Liquid
from Master Bond, Inc.
MasterSil 973S-LO is a two component, silver filled silicone with superb electrical and thermal conductivity. Its exceptionally low volume resistivity allows it to be used for many different applications involving bonding, sealing and coating. It is a paste like system with minimal flow. Its... [See More]
- Features: Electrically Conductive; Encapsulant, Potting Compound; Encapsulant or Conformal Coating; Flexible; Leveling Filling; Non-corrosive; Phase Change; Gap Filler, Foam in Place Gasket; Thermally Conductive
- Composition: Filled
- Chemical System: Silicone
- Cure / Technology: Thermoset; Two Component ; Addition Cure
from Master Bond, Inc.
EP3HTSDA-1 is a one part, highly electrically conductive epoxy designed for die attach applications. It dispenses smoothly and easily, without tailing. Its easy handling and desirable performance properties, such as thermal conductivity, die shear strength and dimensional stability, allow it to be... [See More]
- Features: High Dielectric; Encapsulant, Potting Compound; Non-corrosive; Gap Filler, Foam in Place Gasket; Thermally Conductive
- Composition: Unfilled
- Chemical System: Epoxy
- Cure / Technology: Thermoset; Single Component
from Master Bond, Inc.
EP35SP is a two component epoxy system specially formulated to resist high temperatures and aggressive chemicals. It has a paste viscosity with little to no flow when curing. [See More]
- Features: High Dielectric; Encapsulant or Conformal Coating; Non-corrosive; Thermally Conductive
- Composition: Unfilled
- Chemical System: Epoxy
- Cure / Technology: Thermoset; Two Component
from Master Bond, Inc.
Master Bond EP30LTE-2 is a two part epoxy with an extraordinarily low coefficient of thermal expansion (CTE).It is used for bonding, sealing, coating and encapsulating. [See More]
- Features: High Dielectric; Encapsulant, Potting Compound; Encapsulant or Conformal Coating; Non-corrosive; Phase Change; Thermal Insulation
- Composition: Unfilled
- Chemical System: Epoxy
- Cure / Technology: Thermoset; Two Component ; Room Temperature Vulcanizing or Curing
from Master Bond, Inc.
EP93FRHT is a two component epoxy that readily passes the Airbus specifications for flame resistance, smoke emission and toxic gas emission as listed under ABD 0031, Issue F. These tests focus on how quickly this adhesive will self extinguish when subjected to a vertical burn test, optical density... [See More]
- Features: High Dielectric; Encapsulant, Potting Compound; Encapsulant or Conformal Coating; Flame Retardant; Leveling Filling; Non-corrosive; Gap Filler, Foam in Place Gasket; Thermally Conductive
- Composition: Unfilled
- Chemical System: Epoxy
- Cure / Technology: Thermoset; Two Component ; Room Temperature Vulcanizing or Curing
from Master Bond, Inc.
EP40Med is a two component, room temperature curing epoxy with high elongation that passes ISO 10993-5 for cytotoxicity. It features exceptional adhesion to polycarbonates and acrylics. [See More]
- Features: High Dielectric; Encapsulant, Potting Compound; Encapsulant or Conformal Coating; Flexible; Leveling Filling; Non-corrosive; Gap Filler, Foam in Place Gasket; Thermally Conductive
- Composition: Unfilled
- Chemical System: Epoxy
- Cure / Technology: Thermoset; Two Component ; Room Temperature Vulcanizing or Curing
from Master Bond, Inc.
MasterSil 170 Gel is an addition cured, two component, low viscosity silicone material for specialty potting and encapsulation. [See More]
- Features: High Dielectric; Encapsulant, Potting Compound; Flexible; Leveling Filling; Non-corrosive; Phase Change; Thermally Conductive
- Composition: Unfilled
- Chemical System: Silicone
- Cure / Technology: Thermoset; Two Component ; Room Temperature Vulcanizing or Curing
from Master Bond, Inc.
Master Bond Polymer System EP13 is a one component heat curing epoxy featuring high shear strength and very high temperature resistance. This one component system is formulated to cure at temperatures from 300 °F to 350 °F for 60-90 minutes. Upon cure, EP13 readily attains tensile shear... [See More]
- Features: High Dielectric; Encapsulant or Conformal Coating; Non-corrosive
- Composition: Unfilled
- Chemical System: Epoxy
- Cure / Technology: Thermoset; Single Component
from Master Bond, Inc.
Master Bond Polymer System 125 is a two component toughened epoxy resin for prolonged service above 500 °F with truly outstanding chemical resistance. High strength bonds serviceable up to 600 °F can be obtained with this exceptionally thermally stable and chemically resistant epoxy resin... [See More]
- Features: High Dielectric; Leveling Filling; Non-corrosive; Gap Filler, Foam in Place Gasket; Thermal Insulation
- Composition: Unfilled
- Chemical System: Epoxy
- Cure / Technology: Thermoset; Two Component
from Master Bond, Inc.
Master Bond Polymer System EP15 is a one component heat curing epoxy featuring high tensile strength that is utilized in testing the adhesion or cohesive strength of flame-sprayed coatings. This standard test is fully detailed in ASTM specification C 633. EP15 is formulated to cure at temperatures... [See More]
- Features: Non-corrosive
- Composition: Unfilled
- Chemical System: Epoxy
- Cure / Technology: Thermoset; Single Component
from Master Bond, Inc.
Master Bond Polymer System EP112 is a solventless, low viscosity two component cycloaliphatic epoxy resin system which is specifically designed for high performance outdoor and indoor electrical/electronicc/ structural applications. The two components are combined in a convenient noncritical mix... [See More]
- Features: High Dielectric; Encapsulant, Potting Compound; Encapsulant or Conformal Coating; Leveling Filling; Non-corrosive; Gap Filler, Foam in Place Gasket; Solvent Based; Thermal Insulation
- Composition: Unfilled
- Chemical System: Epoxy
- Cure / Technology: Thermoset; Two Component
from Master Bond, Inc.
Two component, EP30LP-2 produces high strength, rigid bonds with exceptionally low linear shrinkage for bonding, sealing, coating, and encapsulation applications. This system is very resistant to chemicals including water, oils, solvents, acids and bases. [See More]
- Features: High Dielectric; Encapsulant, Potting Compound; Encapsulant or Conformal Coating; Leveling Filling; Non-corrosive; Gap Filler, Foam in Place Gasket; Thermally Conductive
- Composition: Unfilled
- Chemical System: Epoxy
- Cure / Technology: Thermoset; Two Component ; Room Temperature Vulcanizing or Curing
from Master Bond, Inc.
Master Bond EP30NS is a nano silica filled epoxy system featuring high abrasion resistance. It has exceptional dimensional stability and low shrinkage upon curing of less than 0.01%. EP30NS is optically clear and meets NASA low outgassing specifications. [See More]
- Features: High Dielectric; Encapsulant, Potting Compound; Encapsulant or Conformal Coating; Leveling Filling; Non-corrosive; Gap Filler, Foam in Place Gasket; Thermally Conductive
- Composition: Filled
- Chemical System: Epoxy
- Cure / Technology: Thermoset; Two Component ; Room Temperature Vulcanizing or Curing
from Master Bond, Inc.
EP42-2LV Black is a two component, room temperature curing epoxy compound featuring low viscosity and superior chemical resistance. It meets NASA low outgassing specifications, is black in color and optically opaque. [See More]
- Features: High Dielectric; Encapsulant, Potting Compound; Encapsulant or Conformal Coating; Leveling Filling; Non-corrosive; Gap Filler, Foam in Place Gasket; Thermally Conductive
- Composition: Unfilled
- Chemical System: Epoxy
- Cure / Technology: Thermoset; Two Component ; Room Temperature Vulcanizing or Curing
from Master Bond, Inc.
Master Bond Supreme 17HT is a one component toughened epoxy for bonding and sealing. It has a moderate viscosity system with good flow properties. [See More]
- Features: High Dielectric; Encapsulant, Potting Compound; Flexible; Non-corrosive; Thermally Conductive
- Composition: Unfilled
- Chemical System: Epoxy
- Cure / Technology: Thermoset; Single Component
from Master Bond, Inc.
Well suited for structural bonding applications, EP13LTE offers excellent adhesion to dissimilar substrates and has a stellar physical strength profile. This NASA low outgassing approved system is easy to use, doesn't require mixing, and has an unlimited working life at room temperature. It also... [See More]
- Features: High Dielectric; Non-corrosive
- Composition: Unfilled
- Chemical System: Epoxy
- Cure / Technology: Thermoset; Single Component
from Master Bond, Inc.
Formulated for die attach applications, Master Bond EP17HTDA-1 is a one component epoxy that can also be used for conventional bonding and sealing. This system features an excellent die shear strength of 24-27 kg-f and can be used in a typical die size ranging from 4-400 mm2. EP17HTDA-1 can also be... [See More]
- Features: High Dielectric; Encapsulant, Potting Compound; Non-corrosive; Gap Filler, Foam in Place Gasket; Thermally Conductive
- Composition: Unfilled
- Chemical System: Epoxy
- Cure / Technology: Thermoset; Single Component
from Master Bond, Inc.
Master Bond UV10TK40M is a higher viscosity, one part UV system for bonding, sealing and coating with good optical clarity, excellent physical properties and a high glass transition temperature. [See More]
- Features: High Dielectric; Encapsulant or Conformal Coating; Non-corrosive; Thermally Conductive
- Cure / Technology: Thermoset; UV or Radiation Cured; Single Component; UV curing system
- Composition: Unfilled
- Type / Form: Liquid
from Master Bond, Inc.
Master Bond UV10 and UV10TK are one component UV curable modified epoxy compounds, ready for use as supplied, for high performance casting, coatings, sealing and bonding applications. UV10 is a low viscosity amber liquid at room temperature and UV10TK is a medium viscosity amber liquid at room... [See More]
- Features: High Dielectric; Encapsulant, Potting Compound; Encapsulant or Conformal Coating; Leveling Filling; Non-corrosive; Gap Filler, Foam in Place Gasket; Thermal Insulation
- Type / Form: Liquid
- Cure / Technology: Thermoset; UV or Radiation Cured; Single Component
- Substrate Compatibility: Ceramic, Glass; Composites; Metal; Plastic; Porous Surfaces; Rubber or Elastomer; Dissimilar Substrates
from Master Bond, Inc.
Supreme 3HTND-2DM is a rapid curing, toughened, one part epoxy system used for the dam-and-fill method for chip-on-board encapsulation. It passes ASTM E595 specifications for NASA low outgassing allowing it to be used in vacuum, aerospace, electro-optic and other related applications. Supreme... [See More]
- Features: High Dielectric; Encapsulant, Potting Compound; Glob Top, Daub, Doming or Overfill; Leveling Filling; Non-corrosive; Gap Filler, Foam in Place Gasket; Thermally Conductive
- Composition: Unfilled
- Chemical System: Epoxy
- Cure / Technology: Thermoset; Single Component
from Master Bond, Inc.
Master Bond Polymer System EP30 is a low viscosity, two component epoxy adhesive for general purpose bonding, coating, sealing and casting formulated to cure at room temperature or more rapidly at elevated temperatures with a four (4) to one (1) mix ratio by weight. This adhesive is 100% reactive... [See More]
- Features: Encapsulant, Potting Compound; Encapsulant or Conformal Coating; Flexible; Non-corrosive; Gap Filler, Foam in Place Gasket; Thermal Insulation
- Cure / Technology: Thermoset; Two Component
- Chemical System: Epoxy
- Type / Form: Liquid
from Master Bond, Inc.
Formulated to have special optical transmission properties, EP30-2LB is an optically clear epoxy that does not permit UV light transmission, but transmits well from 450-900 nm and above. It is a user friendly compound that has a non-critical ten to one mix ratio by weight. This system cures readily... [See More]
- Features: High Dielectric; Encapsulant, Potting Compound; Encapsulant or Conformal Coating; Leveling Filling; Non-corrosive; Gap Filler, Foam in Place Gasket; Thermally Conductive
- Composition: Unfilled
- Chemical System: Epoxy
- Cure / Technology: Thermoset; Two Component ; Room Temperature Vulcanizing or Curing
from Wacker Chemical Corp.
ELASTOSIL ® A 95 GRY is a one part thixotropic sealant intended for use where a. soft, high elongation material is desired. ELASTOSIL ® A 95 GRY is particularly effective as an adhesive in applications where the bonded joint is subjected to relatively large movements in service. [See More]
- Features: Non-corrosive
- Cure / Technology: Thermoset; Single Component; Room Temperature Vulcanizing or Curing
- Chemical System: Silicone
- Type / Form: Grease, Paste
from Anti-Seize Technology
AST-SEAL ™HD (Heavy Duty) stainless steel grade is formulated for stainless steel alloy fittings to cure more quickly than standard grade anaerobic. Withstands temperatures from -65 ° to 400 °F (-54 ° to 204 °C) continuous, 500 °F (260 °C) intermittent. UL... [See More]
- Features: Non-corrosive
- Type / Form: Grease, Paste
- Cure / Technology: Anaerobic; Single Component
- Substrate Compatibility: Metal
from Novagard Solutions
Non-corrosive, single component silicone coating [See More]
- Features: High Dielectric; Encapsulant, Potting Compound; Encapsulant or Conformal Coating; Non-corrosive
- Composition: Unfilled
- Chemical System: Silicone; Elastomeric
- Cure / Technology: Thermoset; UV or Radiation Cured (optional feature); Single Component; Reactive or Moisture Cured (optional feature); Room Temperature Vulcanizing or Curing
from Phelps Industrial Products
Phelps Style 9815 is 100% RTV (room temperature vulcanizing) silicone that can be used anywhere a high temperature sealant/adhesive is required. This high temp silicone sealant builds a formed-in-place gasket at operating temperatures up to 310 °C. Phelps Style 9815 high temperature silicone... [See More]
- Features: Non-corrosive
- Composition: Unfilled
- Chemical System: Silicone
- Cure / Technology: Room Temperature Vulcanizing or Curing
from Anti-Seize Technology
AST-SEAL ™HD (Heavy Duty) stainless steel grade is formulated for stainless steel alloy fittings to cure more quickly than standard grade anaerobic. Withstands temperatures from -65 ° to 400 °F (-54 ° to 204 °C) continuous, 500 °F (260 °C) intermittent. UL... [See More]
- Features: Non-corrosive
- Type / Form: Grease, Paste
- Cure / Technology: Anaerobic; Single Component
- Substrate Compatibility: Metal
from Phelps Industrial Products
A radically different form of PTFE fluorocarbon material, although very strong and tough, it is soft and "marshmallowy" in character, permitting it to conform easily to irregular surfaces and to compress to a thin, wide ribbon under pressure. Because it is 100% PTFE fluorocarbon, it can be used in... [See More]
- Features: Non-corrosive; Gap Filler, Foam in Place Gasket
- Use Temperature: -450 to 600
- Industry: OEM or Industrial
from Anti-Seize Technology
AST-SEAL ™HD (Heavy Duty) stainless steel grade is formulated for stainless steel alloy fittings to cure more quickly than standard grade anaerobic. Withstands temperatures from -65 ° to 400 °F (-54 ° to 204 °C) continuous, 500 °F (260 °C) intermittent. UL... [See More]
- Features: Non-corrosive
- Type / Form: Grease, Paste
- Cure / Technology: Anaerobic; Single Component
- Substrate Compatibility: Metal
from Phelps Industrial Products
A universal gasket made from 100% expanded PTFE. Although very strong and tough, it is soft and "marshmallowy" in character, permitting it to conform easily to irregular surfaces and to compress to a thin, wide ribbon under pressure. It comes in the form of a continuous cord with an adhesive bead to... [See More]
- Features: Non-corrosive; Gap Filler, Foam in Place Gasket
- Use Temperature: -450 to 600
- Industry: Sanitary; OEM or Industrial
from Anti-Seize Technology
AST-SEAL ™HD (Heavy Duty) stainless steel grade is formulated for stainless steel alloy fittings to cure more quickly than standard grade anaerobic. Withstands temperatures from -65 ° to 400 °F (-54 ° to 204 °C) continuous, 500 °F (260 °C) intermittent. UL... [See More]
- Features: Non-corrosive
- Type / Form: Grease, Paste
- Cure / Technology: Anaerobic; Single Component
- Substrate Compatibility: Metal
from Phelps Industrial Products
Phelps Style 9816 is 100% silicone sealant. This product can be used for gasketing and as an adhesive, and sticks to metal and glass surfaces. For best results clean with a solvent such as xylol, toluol or methyl ethyl ketone. Phelps Silicone Sealant exhibits high degree of flexibility without... [See More]
- Features: Non-corrosive; Gap Filler, Foam in Place Gasket
- Composition: Unfilled
- Chemical System: Silicone
- Cure / Technology: Room Temperature Vulcanizing or Curing
from Anti-Seize Technology
AST-SEAL ™HD (Heavy Duty) stainless steel grade is formulated for stainless steel alloy fittings to cure more quickly than standard grade anaerobic. Withstands temperatures from -65 ° to 400 °F (-54 ° to 204 °C) continuous, 500 °F (260 °C) intermittent. UL... [See More]
- Features: Non-corrosive
- Type / Form: Grease, Paste
- Cure / Technology: Anaerobic; Single Component
- Substrate Compatibility: Metal
from Anti-Seize Technology
AST-SEAL ™HD (Heavy Duty) stainless steel grade is formulated for stainless steel alloy fittings to cure more quickly than standard grade anaerobic. Withstands temperatures from -65 ° to 400 °F (-54 ° to 204 °C) continuous, 500 °F (260 °C) intermittent. UL... [See More]
- Features: Non-corrosive
- Type / Form: Grease, Paste
- Cure / Technology: Anaerobic; Single Component
- Substrate Compatibility: Metal
from Anti-Seize Technology
AST-SEAL ™ Std (Standard Grade) is a general-purpose pipe sealant providing an instant permanent seal that cures in the absence of air to lock threads securely. Withstands temperatures from -65 ° to 300 °F (-54 ° to 149 °C) continuous, 375 °F (191 °C)... [See More]
- Features: Non-corrosive
- Type / Form: Grease, Paste
- Cure / Technology: Anaerobic; Single Component
- Substrate Compatibility: Metal
from Anti-Seize Technology
AST-SEAL ™ Std (Standard Grade) is a general-purpose pipe sealant providing an instant permanent seal that cures in the absence of air to lock threads securely. Withstands temperatures from -65 ° to 300 °F (-54 ° to 149 °C) continuous, 375 °F (191 °C)... [See More]
- Features: Non-corrosive
- Type / Form: Grease, Paste
- Cure / Technology: Anaerobic; Single Component
- Substrate Compatibility: Metal
from Anti-Seize Technology
AST-SEAL ™ Std (Standard Grade) is a general-purpose pipe sealant providing an instant permanent seal that cures in the absence of air to lock threads securely. Withstands temperatures from -65 ° to 300 °F (-54 ° to 149 °C) continuous, 375 °F (191 °C)... [See More]
- Features: Non-corrosive
- Type / Form: Grease, Paste
- Cure / Technology: Anaerobic; Single Component
- Substrate Compatibility: Metal
from Anti-Seize Technology
AST-SEAL ™ Std (Standard Grade) is a general-purpose pipe sealant providing an instant permanent seal that cures in the absence of air to lock threads securely. Withstands temperatures from -65 ° to 300 °F (-54 ° to 149 °C) continuous, 375 °F (191 °C)... [See More]
- Features: Non-corrosive
- Type / Form: Grease, Paste
- Cure / Technology: Anaerobic; Single Component
- Substrate Compatibility: Metal
from Anti-Seize Technology
AST-SEAL ™ Std (Standard Grade) is a general-purpose pipe sealant providing an instant permanent seal that cures in the absence of air to lock threads securely. Withstands temperatures from -65 ° to 300 °F (-54 ° to 149 °C) continuous, 375 °F (191 °C)... [See More]
- Features: Non-corrosive
- Type / Form: Grease, Paste
- Cure / Technology: Anaerobic; Single Component
- Substrate Compatibility: Metal
from Anti-Seize Technology
AST-SEAL ™ Std (Standard Grade) is a general-purpose pipe sealant providing an instant permanent seal that cures in the absence of air to lock threads securely. Withstands temperatures from -65 ° to 300 °F (-54 ° to 149 °C) continuous, 375 °F (191 °C)... [See More]
- Features: Non-corrosive
- Type / Form: Grease, Paste
- Cure / Technology: Anaerobic; Single Component
- Substrate Compatibility: Metal
from Anti-Seize Technology
S'MOOTH ™ is a general-purpose metal pipe thread sealant for industrial and residential use. This white paste has a smooth consistency and no grit. Not for oxygen use. Features and Benefits: Fast drying. Non-toxic, non-corrosive. Food Grade compliant, suitable for incidental food contact. Long... [See More]
- Features: Non-corrosive
- Type / Form: Grease, Paste
- Cure / Technology: Single Component
- Substrate Compatibility: Metal
from Anti-Seize Technology
S'MOOTH ™ is a general-purpose metal pipe thread sealant for industrial and residential use. This white paste has a smooth consistency and no grit. Not for oxygen use. Features and Benefits: Fast drying. Non-toxic, non-corrosive. Food Grade compliant, suitable for incidental food contact. Long... [See More]
- Features: Non-corrosive
- Type / Form: Grease, Paste
- Cure / Technology: Single Component
- Substrate Compatibility: Metal
from Anti-Seize Technology
S'MOOTH ™ is a general-purpose metal pipe thread sealant for industrial and residential use. This white paste has a smooth consistency and no grit. Not for oxygen use. Features and Benefits: Fast drying. Non-toxic, non-corrosive. Food Grade compliant, suitable for incidental food contact. Long... [See More]
- Features: Non-corrosive
- Type / Form: Grease, Paste
- Cure / Technology: Single Component
- Substrate Compatibility: Metal
from Anti-Seize Technology
Counter Display. 12 - 1/2 pint Brush Top Cans. SOF-SET ™ is a semi-smooth, easily-applied, thread-sealing compound formulated with special ingredients to provide superior sealing to a variety of liquids and gases. SOF-SET is non-petroleum based with a high-solids content that firms up after... [See More]
- Features: Non-corrosive
- Cure / Technology: Single Component
- Chemical System: Vinyl
- Type / Form: Grease, Paste
from Anti-Seize Technology
SOF-SET ™ is a semi-smooth, easily-applied, thread-sealing compound formulated with special ingredients to provide superior sealing to a variety of liquids and gases. SOF-SET is non-petroleum based with a high-solids content that firms up after application to further promote a quality seal. [See More]
- Features: Non-corrosive
- Cure / Technology: Single Component
- Chemical System: Vinyl
- Type / Form: Grease, Paste
from Anti-Seize Technology
SOF-SET ™ is a semi-smooth, easily-applied, thread-sealing compound formulated with special ingredients to provide superior sealing to a variety of liquids and gases. SOF-SET is non-petroleum based with a high-solids content that firms up after application to further promote a quality seal. [See More]
- Features: Non-corrosive
- Cure / Technology: Single Component
- Chemical System: Vinyl
- Type / Form: Grease, Paste
from Anti-Seize Technology
SOF-SET ™ is a semi-smooth, easily-applied, thread-sealing compound formulated with special ingredients to provide superior sealing to a variety of liquids and gases. SOF-SET is non-petroleum based with a high-solids content that firms up after application to further promote a quality seal. [See More]
- Features: Non-corrosive
- Cure / Technology: Single Component
- Chemical System: Vinyl
- Type / Form: Grease, Paste
from Anti-Seize Technology
SOF-SET ™ is a semi-smooth, easily-applied, thread-sealing compound formulated with special ingredients to provide superior sealing to a variety of liquids and gases. SOF-SET is non-petroleum based with a high-solids content that firms up after application to further promote a quality seal. [See More]
- Features: Non-corrosive
- Cure / Technology: Single Component
- Chemical System: Vinyl
- Type / Form: Grease, Paste
from Anti-Seize Technology
SOF-SET ™ is a semi-smooth, easily-applied, thread-sealing compound formulated with special ingredients to provide superior sealing to a variety of liquids and gases. SOF-SET is non-petroleum based with a high-solids content that firms up after application to further promote a quality seal. [See More]
- Features: Non-corrosive
- Cure / Technology: Single Component
- Chemical System: Vinyl
- Type / Form: Grease, Paste
from Anti-Seize Technology
SOF-SET ™ is a semi-smooth, easily-applied, thread-sealing compound formulated with special ingredients to provide superior sealing to a variety of liquids and gases. SOF-SET is non-petroleum based with a high-solids content that firms up after application to further promote a quality seal. [See More]
- Features: Non-corrosive
- Cure / Technology: Single Component
- Chemical System: Vinyl
- Type / Form: Grease, Paste
from Anti-Seize Technology
SOF-SET ™ is a semi-smooth, easily-applied, thread-sealing compound formulated with special ingredients to provide superior sealing to a variety of liquids and gases. SOF-SET is non-petroleum based with a high-solids content that firms up after application to further promote a quality seal. [See More]
- Features: Non-corrosive
- Cure / Technology: Single Component
- Chemical System: Vinyl
- Type / Form: Grease, Paste
from Anti-Seize Technology
TFE ™ is a superior-grade, non-hardening, heavy-duty pipe thread sealant that is easy to-apply. Formulated to a thick paste consistency, its fortified with an extra amount of PTFE and PTFE materials to give a positive seal with less effort Because of its unique solids content, TFE fills thread... [See More]
- Features: Non-corrosive
- Type / Form: Grease, Paste
- Cure / Technology: Single Component
- Substrate Compatibility: Metal
from Anti-Seize Technology
TFE ™ is a superior-grade, non-hardening, heavy-duty pipe thread sealant that is easy to-apply. Formulated to a thick paste consistency, its fortified with an extra amount of PTFE and PTFE materials to give a positive seal with less effort Because of its unique solids content, TFE fills thread... [See More]
- Features: Non-corrosive
- Type / Form: Grease, Paste
- Cure / Technology: Single Component
- Substrate Compatibility: Metal