Single Component System Industrial Sealants
from Ellsworth Adhesives
3M Super Silicone Sealant Clear 1/10 Gallon Cartridge is a one component, paste-like adhesive/sealant that adheres to clean metal, glass, wood, ceramic, natural and synthetic fiber, painted surfaces, and many plastics. 0.1 gal Cartridge. [See More]
- Cure / Technology: Single Component
- Substrate Compatibility: Textiles or Fabrics
- Chemical System: Silicone
- Industry: Automotive
from Hernon Manufacturing, Inc.
External Ammunition Sealant 76040 is a single component, U.V curable anaerobic sealant. 76040 has a low viscosity penetrating material capable of bonding and sealing primers and case mouths in ammunition. It is specially formulated for pre-assembled components; it works by capillary action sealing... [See More]
- Cure / Technology: Thermoset; UV or Radiation Cured; Single Component; Room Temperature Vulcanizing or Curing
- Industry: Aerospace; Automotive; Electronics; Electric Power; Military; OEM or Industrial
from Master Bond, Inc.
EP36FR is a one component, high performance epoxy that meets the Airbus standards from ABD0031, Issue F, June 8, 2005 for flame retardancy. It is used in all kinds of aircraft applications where protection is needed from flames, smoke and materials that might burn. [See More]
- Cure / Technology: Thermoset; Single Component
- Composition: Unfilled
- Chemical System: Epoxy
- Type / Form: Liquid
from CHT USA Inc.
CHT's AS1821 is is a non-corrosive, neutral cure, 1-part, RTV (Room Temperature Vulcanising) silicone adhesive sealant. It is one in a range of Acetone cure products which are solvent free. It exhibits excellent primerless adhesion to many substrates and cures rapidly at room temperature when in... [See More]
- Cure / Technology: Single Component; Acetone
- Industry: Automotive; Electronics
- Chemical System: Silicone
- Viscosity: 20000
from RS Components, Ltd.
Monocomponent Silicone Gel 0,3 liter [See More]
- Cure / Technology: Single Component
- Industry: Insulation
- Features: Encapsulant, Potting Compound
from Thermon, Inc
NH nonhardening heat transfer compound is used where thermal expansion and contraction could break the bond of a hardened compound. Typically installed between plate-type heating coils or with systems that require periodic disassembly, NH remains pliable indefinitely, allowing the compound to expand... [See More]
- Cure / Technology: Single Component
- Features: Gap Filler, Foam in Place Gasket; Thermally Conductive
- Type / Form: Liquid
- Use Temperature: 32 to 410
from Ellsworth Adhesives
3M Marine Adhesive Sealant 4000 UV is a one component adhesive sealant that is designed for marine applications above and below the waterline. It cures to form a firm, rubbery waterproof seal and its flexibility allows for the dissipation of stress caused by shock, vibration, swelling or shrinking. [See More]
- Cure / Technology: Single Component
- Industry: Marine
- Chemical System: Polyurethane
from Hernon Manufacturing, Inc.
External Ammunition Sealant 76041 is a single component U.V. anaerobic sealant. 76041 has a low viscosity penetrating material capable of bonding and sealing primers and case mouths in ammunition. It is specially formulated for pre-assembled components; it works by capillary action sealing... [See More]
- Cure / Technology: Thermoset; UV or Radiation Cured; Single Component; Room Temperature Vulcanizing or Curing
- Industry: Aerospace; Automotive; Electronics; Electric Power; Military; OEM or Industrial
from Master Bond, Inc.
One part, nano silica filled UV22DC80-10F has the ability to cure in shadowed out areas. It features a UV and heat curing mechanism. Some noteworthy properties include optical clarity, excellent dimensional stability and outstanding physical strength. [See More]
- Cure / Technology: UV or Radiation Cured; Single Component; Dual Curing
- Type / Form: Liquid
- Composition: Filled
- Substrate Compatibility: Ceramic, Glass; Composites; Metal; Plastic; Porous Surfaces; Dissimilar Substrates
from CHT USA Inc.
AS5702 is a non-corrosive, neutral cure, 1-part, RTV (Room Temperature Vulcanising) silicone adhesive sealant. It is one in a range of Alkoxy cure products which are solvent free. It exhibits excellent primerless adhesion to many substrates and cures at room temperature when in contact with... [See More]
- Cure / Technology: Single Component; Alkoxy
- Industry: Automotive; Electronics
- Chemical System: Silicone
- Use Temperature: -76 to 392
from RS Components, Ltd.
1-component sillicone gel : Pressgel [See More]
- Cure / Technology: Single Component
- Features: Encapsulant, Potting Compound
from Thermon, Inc
T-3 heat transfer compound now has higher temperature ratings than ever before while still creating an efficient thermal bond between a steam or electric heater and process pipes or equipment. A single "Thermonized ™"steam tracer utilizing Thermon's heat transfer compound is more cost... [See More]
- Cure / Technology: Single Component
- Features: Gap Filler, Foam in Place Gasket; Thermally Conductive
- Type / Form: Grease, Paste
- Use Temperature: 32 to 850
from Ellsworth Adhesives
3M Marine Adhesive Sealant 4000 UV is a one component adhesive sealant that is designed for marine applications above and below the waterline. It cures to form a firm, rubbery waterproof seal and its flexibility allows for the dissipation of stress caused by shock, vibration, swelling or shrinking. [See More]
- Cure / Technology: Single Component
- Industry: Marine
- Chemical System: Polyurethane
from Hernon Manufacturing, Inc.
External Ammunition Sealant 76060 is a single component U.V. anaerobic sealant. 76060 has a low viscosity penetrating material capable of bonding and sealing primers and case mouths in ammunition. It is specially formulated for pre-assembled components; it works by capillary action sealing... [See More]
- Cure / Technology: Thermoset; UV or Radiation Cured; Single Component; Room Temperature Vulcanizing or Curing
- Industry: Aerospace; Automotive; Electronics; Electric Power; Military; OEM or Industrial
from Master Bond, Inc.
Master Bond X21 is a specially formulated one component system for bonding and priming polyolefinic surfaces. X21 is a very low viscosity( <250 cps) solvent based system that is easy to apply and process. Most often, it is used as a primer to promote adhesion of polyolefinic substrates to other... [See More]
- Cure / Technology: Thermoset; Single Component
- Composition: Unfilled
- Chemical System: Elastomeric
- Type / Form: Liquid
from RS Components, Ltd.
Epoxy bonding 9514 monocomponent [See More]
- Cure / Technology: Single Component
- Use Temperature: -67 to 392
- Chemical System: Epoxy
from Ellsworth Adhesives
3M Marine Sealant Fast Cure 4200 Black is a one component, fast curing polyurethane adhesive/sealant that chemically reacts with moisture to deliver strong, flexible bonds to wood, gel coat and fiberglass. 1/10 gal Cartridge. [See More]
- Cure / Technology: Single Component
- Chemical System: Polyurethane
from Hernon Manufacturing, Inc.
External Ammunition Sealant 76061 is a single component U.V. anaerobic sealant. 76061 has a low viscosity penetrating material capable of bonding and sealing primers and case mouths in ammunition. It is specially formulated for pre-assembled components; it works by capillary action sealing... [See More]
- Cure / Technology: Thermoset; UV or Radiation Cured; Single Component; Room Temperature Vulcanizing or Curing
- Industry: Aerospace; Automotive; Electronics; Electric Power; Military; OEM or Industrial
from Master Bond, Inc.
EP3HTSDA-1 is a one part, highly electrically conductive epoxy designed for die attach applications. It dispenses smoothly and easily, without tailing. Its easy handling and desirable performance properties, such as thermal conductivity, die shear strength and dimensional stability, allow it to be... [See More]
- Cure / Technology: Thermoset; Single Component
- Composition: Unfilled
- Chemical System: Epoxy
- Type / Form: Liquid
from Ellsworth Adhesives
3M Marine Sealant Fast Cure 4200 White is a one component, fast curing polyurethane adhesive/sealant that chemically reacts with moisture to deliver strong, flexible bonds to wood, gel coat and fiberglass. 1/10 gal Cartridge. [See More]
- Cure / Technology: Single Component
- Chemical System: Polyurethane
from Hernon Manufacturing, Inc.
External Ammunition Sealant 76081 is a single component U.V. anaerobic sealant. 76081 has a low viscosity penetrating material capable of bonding and sealing primers and case mouths in ammunition. This Sealant is specially formulated for Ammunition that needs greater fit tolerance and higher bullet... [See More]
- Cure / Technology: Thermoset; UV or Radiation Cured; Single Component; Room Temperature Vulcanizing or Curing
- Industry: Aerospace; Automotive; Electronics; Electric Power; Military; OEM or Industrial
from Master Bond, Inc.
Master Bond X-5 is specially formulated, synthetic elastomer-based, one component adhesive for high performance bonding and sealing. This synthetic elastomer based adhesive bonds well in both shear and peel to similar and dissimilar surfaces including metals, woods, most plastics, ceramics, glass,... [See More]
- Cure / Technology: Thermoset; Single Component
- Composition: Unfilled
- Chemical System: Elastomeric
- Type / Form: Liquid
from Ellsworth Adhesives
3M Marine Adhesive Sealant 5200 Black is a one component, fast curing polyurethane that forms a watertight, weather resistant seal on joints and boat hardware both above and below the waterline. 1/10 gal Cartridge. [See More]
- Cure / Technology: Single Component
- Tensile (Break): 1000
- Chemical System: Polyurethane
- Elongation: 874.0
from Hernon Manufacturing, Inc.
External Ammunition Sealant 76082 is a single component U.V. anaerobic sealant. 76082 has a low viscosity penetrating material capable of bonding and sealing primers and case mouths in ammunition. This Sealant is specially formulated for Ammunition that needs greater fit tolerance and higher bullet... [See More]
- Cure / Technology: Thermoset; UV or Radiation Cured; Single Component; Room Temperature Vulcanizing or Curing
- Industry: Aerospace; Automotive; Electronics; Electric Power; Military; OEM or Industrial
from Master Bond, Inc.
Master Bond Polymer System EP13 is a one component heat curing epoxy featuring high shear strength and very high temperature resistance. This one component system is formulated to cure at temperatures from 300 °F to 350 °F for 60-90 minutes. Upon cure, EP13 readily attains tensile shear... [See More]
- Cure / Technology: Thermoset; Single Component
- Composition: Unfilled
- Chemical System: Epoxy
- Substrate Compatibility: Ceramic, Glass; Metal
from Ellsworth Adhesives
3M Marine Adhesive Sealant 5200 White is a one component, moisture-curing, gap-filling polyurethane used for permanent bonding of wood, gelcoat, and fiberglass. It forms a watertight, weather resistant seal on joints and boat hardware both above and below the waterline. 1/10 gal Cartridge. [See More]
- Cure / Technology: Single Component
- Tensile (Break): 700
- Chemical System: Polyurethane
- Elongation: 700.0
from Hernon Manufacturing, Inc.
External Ammunition Sealant 76083 is a single component U.V. anaerobic sealant. 76083 has a low viscosity penetrating material capable of bonding and sealing primers and case mouths in ammunition. This Sealant is specially formulated for Ammunition that needs greater fit tolerance and higher bullet... [See More]
- Cure / Technology: Thermoset; UV or Radiation Cured; Single Component; Room Temperature Vulcanizing or Curing
- Industry: Aerospace; Automotive; Electronics; Electric Power; Military; OEM or Industrial
from Master Bond, Inc.
Master Bond Polymer System EP15 is a one component heat curing epoxy featuring high tensile strength that is utilized in testing the adhesion or cohesive strength of flame-sprayed coatings. This standard test is fully detailed in ASTM specification C 633. EP15 is formulated to cure at temperatures... [See More]
- Cure / Technology: Thermoset; Single Component
- Composition: Unfilled
- Chemical System: Epoxy
- Type / Form: Grease, Paste
from Ellsworth Adhesives
3M Polyurethane Sealant 540 Black is a one component, moisture curing sealant that forms permanent elastic bonds to a variety of materials including metals, plastics, fiberglass, and wood. 310 mL Cartridge. [See More]
- Cure / Technology: Single Component
- Substrate Compatibility: Metal; Plastic; Wood
- Chemical System: Polyurethane
- Viscosity: 300000
from Hernon Manufacturing, Inc.
External Ammunition Sealant 76084 is a single component U.V. anaerobic sealant. 76084 has a low viscosity penetrating material capable of bonding and sealing primers and case mouths in ammunition. This Sealant is specially formulated for Ammunition that needs greater fit tolerance and higher bullet... [See More]
- Cure / Technology: Thermoset; UV or Radiation Cured; Single Component; Room Temperature Vulcanizing or Curing
- Industry: Aerospace; Automotive; Electronics; Electric Power; Military; OEM or Industrial
from Master Bond, Inc.
Master Bond Polymer System FL901AO is a one component high performance, thermally conductive, electrically insulative epoxy resin based adhesive film with outstanding performance characteristics. Unlike many other such epoxy film products, it does not require refrigerated storage although this is... [See More]
- Cure / Technology: Thermoset; Single Component
- Composition: Unfilled
- Chemical System: Epoxy
- Substrate Compatibility: Ceramic, Glass; Composites; Metal; Dissimilar Substrates
from Ellsworth Adhesives
3M Polyurethane Sealant 540 Gray is a one component, moisture curing sealant that forms permanent elastic bonds to a variety of materials including metals, plastics, fiberglass, and wood. 310 mL Cartridge. [See More]
- Cure / Technology: Single Component
- Substrate Compatibility: Metal; Plastic; Wood
- Chemical System: Polyurethane
- Viscosity: 300000
from Hernon Manufacturing, Inc.
Ammunition Primer Sealant 34194 is a single component 100% solid system offering a tough, dry coating with superior chemical and environmental resistance after cure. Ammunition Primer Sealant 34194 will cure rapidly when exposed to high intensity U.V. light. This coating is formulated to migrate... [See More]
- Cure / Technology: UV or Radiation Cured; Single Component
- Industry: Aerospace; Automotive; Electronics; Electric Power; Military; OEM or Industrial
from Master Bond, Inc.
Master Bond Supreme 17HT is a one component toughened epoxy for bonding and sealing. It has a moderate viscosity system with good flow properties. [See More]
- Cure / Technology: Thermoset; Single Component
- Composition: Unfilled
- Chemical System: Epoxy
- Type / Form: Liquid
from Ellsworth Adhesives
3M Polyurethane Sealant 540 Gray is a one component, moisture curing sealant that forms permanent elastic bonds to a variety of materials including metals, plastics, fiberglass, and wood. 400 mL Sausage. [See More]
- Cure / Technology: Single Component
- Substrate Compatibility: Metal; Plastic; Wood
- Chemical System: Polyurethane
- Viscosity: 300000
from Hernon Manufacturing, Inc.
Grenade Igniter Case Sealant 40995 is a single component anaerobic thread locking and sealing adhesive. Grenade Igniter Case Sealant 40995 is a low viscosity penetrating material that works by capillary action between mating surfaces. The cured adhesive is a high-performance thermoset plastic... [See More]
- Cure / Technology: Thermoset; UV or Radiation Cured; Single Component; Room Temperature Vulcanizing or Curing
- Industry: Aerospace; Automotive; Electronics; Electric Power; Military; OEM or Industrial
from Master Bond, Inc.
Well suited for structural bonding applications, EP13LTE offers excellent adhesion to dissimilar substrates and has a stellar physical strength profile. This NASA low outgassing approved system is easy to use, doesn't require mixing, and has an unlimited working life at room temperature. It also... [See More]
- Cure / Technology: Thermoset; Single Component
- Composition: Unfilled
- Chemical System: Epoxy
- Type / Form: Liquid
from Ellsworth Adhesives
3M Polyurethane Sealant 540 Gray is a one component, moisture curing sealant that forms permanent elastic bonds to a variety of materials including metals, plastics, fiberglass, and wood. 600 mL Sausage. [See More]
- Cure / Technology: Single Component
- Substrate Compatibility: Metal; Plastic; Wood
- Chemical System: Polyurethane
- Viscosity: 300000
from Hernon Manufacturing, Inc.
Grenade Igniter Case Sealant 47422 is a single component UV and anaerobic curing adhesive. Grenade Igniter Case Sealant 47422 is a low viscosity penetrating material that works by capillary action between mating surfaces. The cured adhesive is a high performance thermoset plastic suitable for... [See More]
- Cure / Technology: Thermoset; UV or Radiation Cured; Single Component; Room Temperature Vulcanizing or Curing
- Industry: Aerospace; Automotive; Electronics; Electric Power; Military; OEM or Industrial
from Master Bond, Inc.
Master Bond Polymer System EP36 is a unique one component high performance toughened epoxy system for electrical potting, casting, encapsulation, baked coatings and adhesive applications. It features an outstanding combination of properties including high temperature stability up to 500 °F,... [See More]
- Cure / Technology: Thermoset; Single Component
- Composition: Unfilled
- Chemical System: Epoxy
- Type / Form: Liquid
from Ellsworth Adhesives
3M Polyurethane Sealant 540 White is a one component, moisture curing sealant that forms permanent elastic bonds to a variety of materials including metals, plastics, fiberglass, and wood. 310 mL Cartridge. [See More]
- Cure / Technology: Single Component
- Substrate Compatibility: Metal; Plastic; Wood
- Chemical System: Polyurethane
- Viscosity: 300000
from Hernon Manufacturing, Inc.
Bullet Proof 650 is an environmentally friendly, single component, room temperature cure sealant and coating material. Bullet Proof 650 is formulated to waterproof and seal the interface between a bullet and cartridge. Bullet Proof 650 coats the inside of large shells to prevent the corrosive attack... [See More]
- Cure / Technology: Single Component; Room Temperature Vulcanizing or Curing
- Industry: Aerospace; Automotive; Electronics; Electric Power; Military; OEM or Industrial
from Master Bond, Inc.
Formulated for die attach applications, Master Bond EP17HTDA-1 is a one component epoxy that can also be used for conventional bonding and sealing. This system features an excellent die shear strength of 24-27 kg-f and can be used in a typical die size ranging from 4-400 mm2. EP17HTDA-1 can also be... [See More]
- Cure / Technology: Thermoset; Single Component
- Composition: Unfilled
- Chemical System: Epoxy
- Type / Form: Liquid
from Ellsworth Adhesives
3M Polyurethane Sealant 540 White is a one component, moisture curing sealant that forms permanent elastic bonds to a variety of materials including metals, plastics, fiberglass, and wood. 400 mL Sausage. [See More]
- Cure / Technology: Single Component
- Substrate Compatibility: Metal; Plastic; Wood
- Chemical System: Polyurethane
- Viscosity: 300000
from Hernon Manufacturing, Inc.
Dripstop ® 921 is a single component multiple purpose anaerobic adhesive gel for locking, lubricating and sealing threaded fasteners and pipe fittings. [See More]
- Cure / Technology: Single Component
- Industry: Aerospace; Automotive; Electronics; Electric Power; Military; OEM or Industrial
from Master Bond, Inc.
Master Bond UV10TK40M is a higher viscosity, one part UV system for bonding, sealing and coating with good optical clarity, excellent physical properties and a high glass transition temperature. [See More]
- Cure / Technology: Thermoset; UV or Radiation Cured; Single Component; UV curing system
- Type / Form: Liquid
- Composition: Unfilled
- Substrate Compatibility: Ceramic, Glass; Composites; Metal; Plastic; Porous Surfaces; Rubber or Elastomer; Dissimilar Substrates
from Ellsworth Adhesives
3M Polyurethane Sealant 540 White is a one component, moisture curing sealant that forms permanent elastic bonds to a variety of materials including metals, plastics, fiberglass, and wood. 600 mL Sausage. [See More]
- Cure / Technology: Single Component
- Substrate Compatibility: Metal; Plastic; Wood
- Chemical System: Polyurethane
- Viscosity: 300000
from Hernon Manufacturing, Inc.
Dripstop ® 923 is a single component, paste-like anaerobic pipe sealant compound, which contains Teflon ®. The product cures when confined in the absence of air between close fitting metal surfaces. This industrial grade sealant develops controlled low strength to facilitate disassembly. [See More]
- Cure / Technology: Single Component
- Industry: Aerospace; Automotive; Electronics; Electric Power; Military; OEM or Industrial
from Master Bond, Inc.
Master Bond Polymer System EP19HT is a storage stable one component liquid epoxy resin system for durable, high performance adhesive/sealants, impregnates and liners. It features remarkably long shelf life and excellent storage characteristics at ambient temperatures yet cures readily at elevated... [See More]
- Cure / Technology: Thermoset; Single Component
- Composition: Unfilled
- Chemical System: Epoxy
- Substrate Compatibility: Ceramic, Glass; Composites; Metal; Porous Surfaces
from Ellsworth Adhesives
3M Polyurethane Adhesive Sealant 560 Black is a one component, high strength, moisture curing product that forms a permanent elastic bond to a variety of materials including aluminum, steel, coated metal, plastics, and wood. 310 mL Cartridge. [See More]
- Cure / Technology: Single Component
- Substrate Compatibility: Metal; Plastic; Wood
- Chemical System: Polyurethane
- Viscosity: 300000
from Hernon Manufacturing, Inc.
Dripstop ® 943 is an adhesive/sealant specifically formulated for the sealing and mild locking of Hydraulic and Pneumatic threaded parts. Dripstop ® 943 will positively seal pipe threads, standard nuts and bolts, fittings for hydraulic and pneumatic systems, air conditioners, fittings for... [See More]
- Cure / Technology: Thermoset; Single Component; Room Temperature Vulcanizing or Curing
- Industry: Aerospace; Automotive; Electronics; Electric Power; Military; OEM or Industrial
from Master Bond, Inc.
Master Bond UV10 and UV10TK are one component UV curable modified epoxy compounds, ready for use as supplied, for high performance casting, coatings, sealing and bonding applications. UV10 is a low viscosity amber liquid at room temperature and UV10TK is a medium viscosity amber liquid at room... [See More]
- Cure / Technology: Thermoset; UV or Radiation Cured; Single Component
- Substrate Compatibility: Ceramic, Glass; Composites; Metal; Plastic; Porous Surfaces; Rubber or Elastomer; Dissimilar Substrates
- Type / Form: Liquid
- Features: High Dielectric; Encapsulant, Potting Compound; Encapsulant or Conformal Coating; Leveling Filling; Non-corrosive; Gap Filler, Foam in Place Gasket; Thermal Insulation
from Ellsworth Adhesives
3M Polyurethane Adhesive Sealant 560 Gray is a one component, high strength, moisture curing product that forms a permanent elastic bond to a variety of materials including aluminum, steel, coated metal, plastics, and wood. 310 mL Cartridge. [See More]
- Cure / Technology: Single Component
- Substrate Compatibility: Metal; Plastic; Wood
- Chemical System: Polyurethane
- Viscosity: 300000
from Hernon Manufacturing, Inc.
Dripstop ® 945 is a high-performance adhesive/sealant specifically formulated for the sealing and mild locking of hydraulic and pneumatic threaded parts used with hydraulic and pneumatic equipment. Dripstop ® 945 will seal pipe threads, standard nuts and bolts, fittings for hydraulic and... [See More]
- Cure / Technology: Thermoset; Single Component; Room Temperature Vulcanizing or Curing
- Industry: Aerospace; Automotive; Electronics; Electric Power; Military; OEM or Industrial
from Master Bond, Inc.
Supreme 3HTND-2DM is a rapid curing, toughened, one part epoxy system used for the dam-and-fill method for chip-on-board encapsulation. It passes ASTM E595 specifications for NASA low outgassing allowing it to be used in vacuum, aerospace, electro-optic and other related applications. Supreme... [See More]
- Cure / Technology: Thermoset; Single Component
- Composition: Unfilled
- Chemical System: Epoxy
- Type / Form: Grease, Paste
from Chemence Inc.
Krylex KT722 is a high strength, high viscosity, high service temperature, anaerobic thread locker. KT722 cures when confined in the absence of air between close-fitting metal surfaces. KT722 is formulated to lock all metric and imperial nuts and bolts, preventing vibration loosening and leakage... [See More]
- Cure / Technology: Anaerobic; Two Component (optional feature); Single Component
- Substrate Compatibility: Metal
- Type / Form: Liquid
- Features: Gap Filler, Foam in Place Gasket; Threadlocker or Retainer
from Owens Corning® FOAMGLAS® Insulation
A one-part, neutral cure, sealant formulated for use with FOAMGLAS ® insulation systems. PITTSEAL ® HI-TEMP LV RTV sealant is a one-part, neutral cure, sealant formulated for use with FOAMGLAS ® insulation systems. The lower viscosity of PITTSEAL ® HI-TEMP LV RTV sealant enables the... [See More]
- Cure / Technology: Single Component; Room Temperature Vulcanizing or Curing
- Substrate Compatibility: FOAMGLAS®
- Chemical System: Silicone
- Industry: Insulation Systems
from Wacker Chemical Corp.
The future belongs to adhesives and sealants that offer the combination of strength and elasticity needed for a broad range of challenging applications. To meet the needs of this product class, WACKER has developed innovative hybrid polymers: GENIOSIL® STP-E:The silane-modified polyethers meet all... [See More]
- Cure / Technology: Single Component
- Type / Form: Liquid
- Chemical System: Silicone
- Industry: Construction
from Sauereisen, Inc.
Sauereisen Aluseal Adhesive Cement No. 2 is a ceramic cement paste offering good bond strength and thermal shock. resistant properties for assembling, sealing and cementing porcelain, glass, metal and other materials. Its fine particle size. and excellent flow characteristics make No. 2 a good... [See More]
- Cure / Technology: Air Setting / Film Drying; Single Component
- Composition: Unfilled
- Chemical System: Ceramic
- Type / Form: Grease, Paste
from 3M Aerospace and Aircraft Maintenance Division
Dual-cure 120c or 180c curing, low-density, expandable product for these applications: honeycomb sandwich edge finishing, filling mismatched areas, and core splicing and reinforcing honeycomb core. Fulfills stand-alone fire, smoke and toxic gas emission (FST) requirements according to FAR 25.853 or... [See More]
- Cure / Technology: Single Component
- Type / Form: Sheet or Film
- Chemical System: Epoxy
- Substrate Compatibility: Honeycomb Core
from Henkel Corporation - Industrial
LOCTITE 3220W, Epoxy, Adhesive and Sealant LOCTITE ® 3220W is designed for use in heat sensitive optoelectronic components and other microelectronic devices. This material offers excellent light reflection characteristics. LOCTITE 3220W is an white colored version of LOCTITE 3220 adhesive. One... [See More]
- Cure / Technology: Single Component
- Substrate Compatibility: Ceramic, Glass
- Chemical System: Epoxy
- Viscosity: 31800
from GAF
EverGuard ® Caulk. Description. Elastomeric sealant. Benefit/Application. Suitable for sealing upper lip of exposed termination bars. Suitable for sealing around upper edge of penetration clamping rings. Meets ASTM C-920-87, Type S, Grade NS, Class 25 [See More]
- Cure / Technology: Single Component
- Substrate Compatibility: Plastic
- Chemical System: Elastomeric
- Features: Caulk, Grout; Solvent Based
from Acoustiblok, Inc.
Acoustiblok Sound Sealant is a fire-rated caulk with superior acoustical isolation properties, formulated to bond to Acoustiblok material. All joints and penetrations in Acoustiblok material must be sealed, to obtain rated sound reduction values. Available in 10 oz & 29 oz tubes, and 20 oz... [See More]
- Cure / Technology: Single Component; Room Temperature Vulcanizing or Curing
- Substrate Compatibility: Dissimilar Substrates; Acoustiblok
- Type / Form: Gel
- Features: Caulk, Grout
from McGee Industries, Inc. / McLube Division
McLube mold sealer is effective on new and seasoned molds of all types. Our sealer will reduce or effectively eliminate porosity on the surface of your mold and leave a high-gloss finish. [See More]
- Cure / Technology: Air Setting / Film Drying; Single Component
- Features: Leveling Filling; Solvent Based
- Type / Form: Liquid
- Industry: Tooling
from Epoxies Etc...
UV 60-7016 is a high performance Ultraviolet Curable Adhesive, Sealant, and Potting Compound. This new one component urethane acrylate system was specifically designed for the difficult bonding of glass to metal. UV 60-7016 has outstanding thermal shock and impact resistance, and is an excellent... [See More]
- Cure / Technology: UV or Radiation Cured; Single Component
- Composition: Unfilled
- Chemical System: Elastomeric; Polyurethane
- Type / Form: Liquid
from Protavic America, Inc.
Fast flow, fast cure capillary reworkable underfill. The rheology of the PROTAVIC ANA 10199 R in combination with its fineness make the product perfectly adapted to high reliability small gap underfill applications. It presents a good pot life at room temperature 20-22C and a high reactivity at... [See More]
- Cure / Technology: Thermoset; Single Component
- Type / Form: Liquid
- Composition: Unfilled
- Features: High Dielectric; Gap Filler, Foam in Place Gasket; Thermal Insulation
from Acoustical Solutions, Inc.
Acoustical Caulk is a non-flammable, latex based sealant specially designed for the reduction of sound transmission and drafts in all types of wall systems. Acoustical Caulk remains flexible and adheres firmly to wood, metal studs, concrete, gypsum board and most other building materials. Acoustical... [See More]
- Cure / Technology: Thermoset; Single Component
- Type / Form: Grease, Paste
- Chemical System: Elastomeric
- Substrate Compatibility: Concrete, Masonry; Metal; Paper or Paperboard; Wood; Dissimilar Substrates; Gypsum Board
from Hi-Tech Seals, Inc.
Assembly of cylindrical parts, such as rotors, gears, bushings, collars and bearings, can be effectively and reliably accomplished with HERNON ® ’s line of Cylinlock ® Retaining Compounds. Cylinlock ® high strength products eliminate the need for mechanical methods of assembly... [See More]
- Cure / Technology: Single Component
- Type / Form: Liquid
- Chemical System: Acrylic
- Substrate Compatibility: Metal; Plastic
from Henkel Corporation - Electronics
Loctite ® 5089 ™ Nuva-Sil ® Silicone Gasket / Sealant is used for gasketing and sealing applications. Upon exposure to sufficient UV light and/or atmospheric moisture, this product cures to form a durable, flexible rubber sealant. Typical applications include gasketing/sealing of... [See More]
- Cure / Technology: Single Component
- Substrate Compatibility: Ceramic, Glass; Metal; Plastic
- Chemical System: Epoxy
- Industry: Electronics
from ThreeBond International, Inc.
Room-Temperature-Vulcanizing Silicone, or Silicone RTV's are used for sealing inner fluids via application to the joint surfaces of various flanges, screws, etc. ThreeBond silicones form a rubber elastic bond that have excellent vibration absorption, as well as chemical, shock and heat resistance. [See More]
- Cure / Technology: Single Component; Reactive or Moisture Cured; Room Temperature Vulcanizing or Curing
- Substrate Compatibility: Rubber or Elastomer
- Chemical System: Silicone
- Industry: Automotive
from Sherwin-Williams Protective & Marine Coatings
ArmorSeal ®EXPRESSPATCH is a 100% solids, low odor, waterbased urethane slurry floor patch kit, to be applied at 3/16" minimum thickness (smooth) and broadcast to yield a 1/4" finished system (textured). ExpressPatch can be applied with a flat trowel. It is designed to repair and protect... [See More]
- Cure / Technology: Thermoset; Single Component
- Composition: Unfilled
- Chemical System: Polyurethane
- Type / Form: Pellets
from Epoxy Technology
We have served the optical market since 301 was introduced in 1969. Our products encapsulate, coat, bond and seal plastics, crystals and glass together for optical components, such as prism, filters, and mirrors. EPO-TEK ® fabricated components are the building blocks of camera, laser,... [See More]
- Cure / Technology: Thermoset; Single Component; Room Temperature Vulcanizing or Curing
- Type / Form: Liquid
- Chemical System: Epoxy
- Substrate Compatibility: Ceramic, Glass; Metal; Plastic; Wood
from ND Industries, Inc.
Anaerobic Gasket Makers alleviate the need for preformed gaskets. Remaining liquid when exposed to air, they cure when confined between mating flanges. Typically used on thermostats, pumps, gearboxes, compressors, transmission housings, axle covers and more [See More]
- Cure / Technology: Anaerobic; Single Component
- Type / Form: Liquid
- Chemical System: Silicone
- Substrate Compatibility: Metal
from Anti-Seize Technology
AST-PPD ™ is a smooth, grit-free, gray-colored pipe joint compound. It seals threaded joints and will not crack or crumble. Made for easy disassembly. Contains no lead and is safe for all water systems. Not for oxygen use. Features and Benefits: Sets soft non-hardening. Contains non-toxic,... [See More]
- Cure / Technology: Single Component
- Substrate Compatibility: Metal
- Chemical System: Silicone
- Industry: Construction
from Chemence Inc.
KG105 is a single component, thixotropic, low-medium strength, high temperature anaerobic gasket compound. KG105 cures rapidly when confined in the absence of air on close-fitting metal surfaces. KG105 will give an almost instant low-pressure seal (up to 0.5 Bar after 20 mins.) to allow on-line... [See More]
- Cure / Technology: Anaerobic; Two Component (optional feature); Single Component
- Substrate Compatibility: Metal
- Type / Form: Grease, Paste
- Features: Gap Filler, Foam in Place Gasket
from Wacker Chemical Corp.
GENIOSIL® XM 25 is a gamma-silane-terminated polymer and particularly targets sealant applications, especially where low-modulus products with high recovery are desirable. Used as a co-binder - in combination with one of the conventional silane-modified polymers (GENIOSIL® STP-E range) - GENIOSIL®... [See More]
- Cure / Technology: Single Component
- Type / Form: Grease, Paste
- Chemical System: Silicone
- Industry: Construction
from 3M Aerospace and Aircraft Maintenance Division
3M ™ Scotch-Weld ™ Core Splice Adhesive Film AF 3002 is a 250-350 °F (121-177 °C) curing, low density, expandable product designed for the purpose of filling mismatched areas, and for splicing and reinforcing honeycomb core. High performance over the -67F to 250F (-55C to 12C)... [See More]
- Cure / Technology: Thermoset; Single Component
- Type / Form: Sheet or Film
- Chemical System: Epoxy
- Substrate Compatibility: Honeycomb Core
from Henkel Corporation - Industrial
LOCTITE 596, Silicone, Gasketing & sealing LOCTITE ® 596 cures on exposure to moisture in the air to form a tough, flexible, waterproof, oil-resistant silicone rubber bond. This product resists aging, weathering and thermal cycling without hardening, shrinking or cracking. This product is... [See More]
- Cure / Technology: Single Component; Room Temperature Vulcanizing or Curing
- Viscosity: 73500
- Chemical System: Silicone
from GAF
Description. Matrix ™ 201 Premium SBS Flashing Cement is a premium, asbestos-free formulation for use as a cold-applied bonding agent in SBS modified asphalt roof systems. The high level of modifiers ensures high bonding strength. Heavy, “trowel-grade ” consistency makes this... [See More]
- Cure / Technology: Air Setting / Film Drying; Single Component
- Features: Flexible; UL Rating
- Substrate Compatibility: Metal; SBS Modified Bitumen
- Industry: Construction
from Epoxies Etc...
Epoxies, Etc's resins are used to protect, insulate, and conceal circuitry, components, and devices. These formulations were designed to satisfy the requirements of many demanding potting, encapsulating, and casting applications in the electronic, electrical, automotive, and aerospace industries. [See More]
- Cure / Technology: Thermoset; Single Component
- Composition: Unfilled
- Chemical System: Epoxy
- Type / Form: Liquid
from Acoustical Solutions, Inc.
FireStop Putty Pads provide acoustical protection for wall penetrations in the form of a release lined pad for easy application to electrical boxes or other penetrates. The pad is conveniently sized to fit a typical 1 ½" deep 4S box with no cutting or piercing required. Faced on both sides with a... [See More]
- Cure / Technology: Single Component
- Substrate Compatibility: Metal; Plastic; Rubber or Elastomer
- Type / Form: Grease, Paste
- Features: Flexible; Flame Retardant; Gap Filler, Foam in Place Gasket; UL Rating
from Hi-Tech Seals, Inc.
HERNON ® ’s line of Dripstop ® sealants for plumbing, refrigeration and hydraulics are engineered with many advantages over conventional pipe dopes. These materials harden without shrinkage in the joints creating a tough, insoluble, vibration proof seal that will not leak even if... [See More]
- Cure / Technology: Anaerobic; Single Component
- Type / Form: Grease, Paste
- Chemical System: Acrylic
- Substrate Compatibility: Metal
from Sherwin-Williams Protective & Marine Coatings
HEAVY DUTY BLOCK FILLER is a pure acrylic resin block filler for use on interior and exterior poured and precast concrete, concrete block, and cinder block. Excellent moisture resistance. Excellent filling characteristics. Suitable for use in USDA inspected facilities. Resurface spalled and... [See More]
- Cure / Technology: Thermoset; Single Component
- Composition: Unfilled
- Chemical System: Acrylic
- Type / Form: Liquid
from ND Industries, Inc.
Vibra-Tite anaerobic retaining compounds are designed to increase shear strength on non-threaded cylindrical metal assemblies. The liquid anaerobic material fills the voids between close-fitting metal parts and cures to a toughened thermoset-plastic which creates a solid one piece assembly. [See More]
- Cure / Technology: Anaerobic; Single Component
- Substrate Compatibility: Metal
- Type / Form: Liquid
- Features: Gap Filler, Foam in Place Gasket; Threadlocker or Retainer
from Anti-Seize Technology
AST-PPD ™ is a smooth, grit-free, gray-colored pipe joint compound. It seals threaded joints and will not crack or crumble. Made for easy disassembly. Contains no lead and is safe for all water systems. Not for oxygen use. Features and Benefits: Sets soft non-hardening. Contains non-toxic,... [See More]
- Cure / Technology: Single Component
- Substrate Compatibility: Metal
- Chemical System: Silicone
- Industry: Construction
from Chemence Inc.
KS715 is a fast curing, high strength, silicone RTV adhesive rubber product engineered for applications requiring fast development of physical properties and excellent adhesion. When cured, the elastomer resists weathering, ozone, moisture, UV and high temperatures. KS715 works well in manual and... [See More]
- Cure / Technology: Single Component
- Type / Form: Grease, Paste
- Chemical System: Silicone
- Substrate Compatibility: Ceramic, Glass; Metal; Plastic
from Wacker Chemical Corp.
ELASTOSIL ® N199 is a non-slump RTV-1 silicone sealant that cures at room temperature on contact with moisture in the air. Special features. ready-to-use, one-part system. non-slump. translucent. medium hardness. high flexibility. Excellent adhesion. Application. general-purpose adhesive for the... [See More]
- Cure / Technology: Thermoset; Single Component; Reactive or Moisture Cured; Room Temperature Vulcanizing or Curing
- Type / Form: Grease, Paste
- Chemical System: Silicone; Elastomeric
- Features: Flexible
from 3M Aerospace and Aircraft Maintenance Division
Fast-Drying, Fire Retardant. Apply Over Movable Part. Tampering with Part can be Detected by Break in Sealant. [See More]
- Cure / Technology: Air Setting / Film Drying; Single Component
- Type / Form: Liquid
- Chemical System: Phenolic
- Substrate Compatibility: Metal
from Henkel Corporation - Industrial
LOCTITE ABLESTIK A 304-6, Epoxy, Adhesive and Sealant LOCTITE ® ABLESTIK A 304-6 epoxy adhesive and sealant is designed for high throughput assembly operations. Non-conductive. One component. Readily pourable. Fast cure. Good toughness. Excellent chemical resistance [See More]
- Cure / Technology: Single Component
- Features: High Dielectric
- Chemical System: Epoxy
- Viscosity: 21500
from GAF
Description. MATRIX ™ 202 SBS Flashing Cement is a high quality, asbestos free formulation for use as a cold-applied bonding agent for SBS modified bitumen roof systems. Heavy, “trowel-grade ” consistency makes this product ideal for flashing details, attachment of membrane to... [See More]
- Cure / Technology: Air Setting / Film Drying; Single Component
- Features: Flexible; UL Rating
- Substrate Compatibility: Metal; SBS Modified Bitumen
- Industry: Construction
from Acoustical Solutions, Inc.
SSP Firestop Putty is perfect for metallic conduits, telephone, data or electrical power cable penetrations. A variety of sleeved and non-sleeved applications have been tested and proven providing the ultimate in installation versatility. Non-hardening and reusable, SSP Firestop Putty addresses the... [See More]
- Cure / Technology: Single Component
- Substrate Compatibility: Metal; Plastic; Rubber or Elastomer
- Type / Form: Grease, Paste
- Features: Flexible; Flame Retardant; Gap Filler, Foam in Place Gasket; UL Rating
from Hi-Tech Seals, Inc.
Classic cyanoacrylates are represented by the ethyl and methyl chemistries. Generally, the methyls offer better bond strengths on metals, the ethyls providing better strengths on everything else. Substrate selection and bond line configuration directly influence adhesive performance. [See More]
- Cure / Technology: Single Component; Room Temperature Vulcanizing or Curing
- Type / Form: Liquid
- Chemical System: Cyanoacrylate
- Substrate Compatibility: Ceramic, Glass; Metal; Paper or Paperboard; Plastic; Rubber or Elastomer; Textiles or Fabrics
from Sherwin-Williams Protective & Marine Coatings
KEM ® Cati-Coat ® HS EPOXY FILLER/SEALER is a high performance, interior/exterior, VOC compliant, epoxy block filler. Designed for tenacious adhesion to masonry substrates while filling voids and crevices to smooth the surface. Excellent resistance to moisture, humidity, impact, and... [See More]
- Cure / Technology: Thermoset; Single Component
- Composition: Unfilled
- Chemical System: Epoxy
- Type / Form: Liquid
from ND Industries, Inc.
Vibra-Tite anaerobic thread sealants secure metal pipes and fittings by filling the space between threaded metal parts. Thread sealants prevent leakage caused by tape shredding, vibration loosening, solvent evaporation, and damaged threads. Vibra-Tite products are designed for both low and high... [See More]
- Cure / Technology: Anaerobic; Single Component
- Substrate Compatibility: Metal
- Type / Form: Liquid
- Features: Gap Filler, Foam in Place Gasket; Threadlocker or Retainer
from Anti-Seize Technology
AST-PPD ™ is a smooth, grit-free, gray-colored pipe joint compound. It seals threaded joints and will not crack or crumble. Made for easy disassembly. Contains no lead and is safe for all water systems. Not for oxygen use. Features and Benefits: Sets soft non-hardening. Contains non-toxic,... [See More]
- Cure / Technology: Single Component
- Substrate Compatibility: Metal
- Chemical System: Silicone
- Industry: Construction
from 3M Aerospace and Aircraft Maintenance Division
Structural one-part low weight void filler for aircraft interiors. One-part low weight filler combining extreme low density with high extrusion rate for manual and automatic applications. Pumpable. Full stand alone FST properties with patented non-halogen based FST system. Low flow for ease of... [See More]
- Cure / Technology: Single Component
- Type / Form: Grease, Paste
- Chemical System: Epoxy
- Substrate Compatibility: Honeycomb Core
from Henkel Corporation - Industrial
LOCTITE ABLESTIK E 3508 MOD3, Epoxy, Adhesive, Sealant, Assembly LOCTITE ® ABLESTIK E 3508 MOD3 epoxy adhesive and sealant is designed for high throughput assembly operations. It is also recommended for bonding, sealing or insulating heat sensitive parts. One component, requires no mixing. Fast... [See More]
- Cure / Technology: Single Component
- Viscosity: 32500
- Chemical System: Epoxy
- Use Temperature: 40 to 302
from GAF
Description. MATRIX ™ 203 Plastic Roof Cement is a general purpose, asbestos free formulation for use as a cold-applied sealant and repair material in all types of roof systems. This product is scientifically compounded with premium materials to enhance resistance to flow and increase... [See More]
- Cure / Technology: Air Setting / Film Drying; Single Component
- Features: Flexible; UL Rating
- Substrate Compatibility: Concrete, Masonry
- Industry: Construction
from Acoustical Solutions, Inc.
The Professional's Choice For Spray-Applied Protection of Joints & Penetrations of all types. SpecSeal Sealant has been UL tested and classified for a wide variety of common construction joint applications including floor-to-floor, floor-to-wall, wall-to-floor, wall-to-wall, and head-of-wall... [See More]
- Cure / Technology: Single Component
- Type / Form: Grease, Paste
- Chemical System: Elastomeric
- Substrate Compatibility: Concrete, Masonry; Metal; Paper or Paperboard; Dissimilar Substrates
from Hi-Tech Seals, Inc.
The Nuts N ’ Bolts is an anaerobic adhesive, used in nut and bolt assemblies. When the adhesive is confined between substrates, the oxygen is eliminated and the adhesive cures. These thread locking adhesives offer a wide-range of strengths, viscosities, and temperature ranges for just about... [See More]
- Cure / Technology: Anaerobic; Single Component
- Type / Form: Liquid
- Chemical System: Acrylic
- Substrate Compatibility: Metal
from Anti-Seize Technology
AST-PPD ™ is a smooth, grit-free, gray-colored pipe joint compound. It seals threaded joints and will not crack or crumble. Made for easy disassembly. Contains no lead and is safe for all water systems. Not for oxygen use. Features and Benefits: Sets soft non-hardening. Contains non-toxic,... [See More]
- Cure / Technology: Single Component
- Substrate Compatibility: Metal
- Chemical System: Silicone
- Industry: Construction
from Henkel Corporation - Industrial
LOCTITE ABLESTIK E 3517, Epoxy, Low Electrical Conductivity, Sealant LOCTITE ® ABLESTIK E 3517 is used in applications where a low electrical conductive sealant is required. One component, requires no mixing. Electrically conductive. Low viscosity. Good dispense and flow behavior. High... [See More]
- Cure / Technology: Single Component
- Viscosity: ? to 6000
- Chemical System: Epoxy
from GAF
Description. MATRIX ™ 204 Wet/Dry Roof Cement is a general purpose, asbestos free formulation for wet weather repair of roof leaks. This product has unique water displacing characteristics, which ensure superior bonding to both wet and dry substrates and surfaces. Heavy, “trowel-grade... [See More]
- Cure / Technology: Air Setting / Film Drying; Single Component
- Features: Flexible; UL Rating
- Substrate Compatibility: Concrete, Masonry
- Industry: Construction
from Hi-Tech Seals, Inc.
The Quantum ® group of HERNON ® cyanoacrylates offers specialized performance attributes. This range of grades has been engineered to provide solutions to specific cyanoacrylate challenges. Three categories are offered: surface insensitive, toughened, and low odor-low blooming. [See More]
- Cure / Technology: Single Component; Room Temperature Vulcanizing or Curing
- Type / Form: Liquid
- Chemical System: Cyanoacrylate
- Substrate Compatibility: Ceramic, Glass; Metal; Paper or Paperboard; Plastic; Textiles or Fabrics
from Anti-Seize Technology
AST-PPD ™ is a smooth, grit-free, gray-colored pipe joint compound. It seals threaded joints and will not crack or crumble. Made for easy disassembly. Contains no lead and is safe for all water systems. Not for oxygen use. Features and Benefits: Sets soft non-hardening. Contains non-toxic,... [See More]
- Cure / Technology: Single Component
- Substrate Compatibility: Metal
- Chemical System: Silicone
- Industry: Construction
from Henkel Corporation - Industrial
LOCTITE ABLESTIK G 500HF, Epoxy, Assembly LOCTITE ® ABLESTIK G 500HF is a general purpose epoxy adhesive and sealant that cures to a high gloss finish. One component. Sag resistant. Process ease. Non-abrasive. No flow during cure even on vertical surface. High adhesion strength at elevated... [See More]
- Cure / Technology: Single Component
- Substrate Compatibility: Metal
- Chemical System: Epoxy
- Use Temperature: 40 to 356
from GAF
Elastomeric Roof Coating. Topcoat ® 322 White Elastomeric Coating is a styrene acrylic-based roof coating that forms a seamless and flexible layer of protection for your roof. This coating is designed to seal and dramatically reduce the surface temperatures and to resist heat absorption and... [See More]
- Cure / Technology: Air Setting / Film Drying; Single Component
- Type / Form: Liquid
- Chemical System: Elastomeric
- Substrate Compatibility: Concrete, Masonry
from Hi-Tech Seals, Inc.
HERNON ® offers a complete line of ultraviolet curing adhesives and compounds, the Ultrabond ® line of products. These products are single component systems offering either ultraviolet light or ultraviolet light & primer initiated curing mechanisms. All Ultrabond ® products cure upon... [See More]
- Cure / Technology: UV or Radiation Cured; Single Component
- Type / Form: Liquid
- Chemical System: Acrylic
- Features: Gap Filler, Foam in Place Gasket
from Anti-Seize Technology
AST-PPD ™ is a smooth, grit-free, gray-colored pipe joint compound. It seals threaded joints and will not crack or crumble. Made for easy disassembly. Contains no lead and is safe for all water systems. Not for oxygen use. Features and Benefits: Sets soft non-hardening. Contains non-toxic,... [See More]
- Cure / Technology: Single Component
- Substrate Compatibility: Metal
- Chemical System: Silicone
- Industry: Construction
from Henkel Corporation - Industrial
LOCTITE ABLESTIK NCA 2350, Epoxy, Adhesive and Sealant LOCTITE ® ABLESTIK NCA 2350 is designed for use in heat sensitive devices. Fast cure at low temperature. One component. Good adhesion [See More]
- Cure / Technology: Single Component
- Type / Form: Liquid
- Chemical System: Epoxy
- Viscosity: 13670
from Anti-Seize Technology
AST-SEAL ™HD (Heavy Duty) stainless steel grade is formulated for stainless steel alloy fittings to cure more quickly than standard grade anaerobic. Withstands temperatures from -65 ° to 400 °F (-54 ° to 204 °C) continuous, 500 °F (260 °C) intermittent. UL... [See More]
- Cure / Technology: Anaerobic; Single Component
- Substrate Compatibility: Metal
- Type / Form: Grease, Paste
- Features: Non-corrosive
from Henkel Corporation - Industrial
LOCTITE ABLESTIK NCA 2360, Epoxy, Adhesive and Sealant LOCTITE ® ABLESTIK NCA 2360 is designed for use in heat sensitive devices. One component. Fast cure at low temperature. Good adhesion [See More]
- Cure / Technology: Single Component
- Type / Form: Liquid
- Chemical System: Epoxy
from Anti-Seize Technology
AST-SEAL ™HD (Heavy Duty) stainless steel grade is formulated for stainless steel alloy fittings to cure more quickly than standard grade anaerobic. Withstands temperatures from -65 ° to 400 °F (-54 ° to 204 °C) continuous, 500 °F (260 °C) intermittent. UL... [See More]
- Cure / Technology: Anaerobic; Single Component
- Substrate Compatibility: Metal
- Type / Form: Grease, Paste
- Features: Non-corrosive
from Henkel Corporation - Industrial
LOCTITE ECCOBOND LS 3106P, Acrylate, Lid attach, Sealant LOCTITE ® ECCOBOND LS 3106P is specifically designed for bonding optical components requiring excellent water proof sealing. One component. UV curable. Low viscosity and thixotropic index to provide excellent self-sealing. Low weight loss. [See More]
- Cure / Technology: UV or Radiation Cured; Single Component
- Industry: Optical
- Type / Form: Liquid
- Viscosity: 2818
from Anti-Seize Technology
AST-SEAL ™HD (Heavy Duty) stainless steel grade is formulated for stainless steel alloy fittings to cure more quickly than standard grade anaerobic. Withstands temperatures from -65 ° to 400 °F (-54 ° to 204 °C) continuous, 500 °F (260 °C) intermittent. UL... [See More]
- Cure / Technology: Anaerobic; Single Component
- Substrate Compatibility: Metal
- Type / Form: Grease, Paste
- Features: Non-corrosive
from Henkel Corporation - Industrial
Silane-modified polymer hardener for use with TEROSON-MS adhesives, MS Polymers and sealants. Designed for assembly applications. TEROSON ® MS 9371B is a white, thixotropic, silane-modified polymer hardener paste. The product is used for accelerating TEROSON-MS series adhesives and sealants... [See More]
- Cure / Technology: Single Component
from Anti-Seize Technology
AST-SEAL ™HD (Heavy Duty) stainless steel grade is formulated for stainless steel alloy fittings to cure more quickly than standard grade anaerobic. Withstands temperatures from -65 ° to 400 °F (-54 ° to 204 °C) continuous, 500 °F (260 °C) intermittent. UL... [See More]
- Cure / Technology: Anaerobic; Single Component
- Substrate Compatibility: Metal
- Type / Form: Grease, Paste
- Features: Non-corrosive
from Henkel Corporation - Industrial
Methacrylate ester acrylic paste which improves flange-sealing reliability. It provides a tough, resilient, solvent and temperature resistant seal LOCTITE ® 5127 is a blue methacrylate ester acrylic paste which improves flange-sealing reliability. After curing between mating metal flanges, it... [See More]
- Cure / Technology: Anaerobic; Single Component
- Viscosity: ? to 500000
- Chemical System: Acrylic
- Gap Fill: 0.0100
from Anti-Seize Technology
AST-SEAL ™HD (Heavy Duty) stainless steel grade is formulated for stainless steel alloy fittings to cure more quickly than standard grade anaerobic. Withstands temperatures from -65 ° to 400 °F (-54 ° to 204 °C) continuous, 500 °F (260 °C) intermittent. UL... [See More]
- Cure / Technology: Anaerobic; Single Component
- Substrate Compatibility: Metal
- Type / Form: Grease, Paste
- Features: Non-corrosive
from Henkel Corporation - Industrial
Industrial, anaerobic, rigid flange polyacrylate sealant. This gel-like anaerobic material is intended for use in place of a wide variety of pre-formed, pre-cut gaskets. LOCTITE ® 504 is an industrial, anaerobic, rigid flange polyacrylate sealant. This gel-like anaerobic material is intended... [See More]
- Cure / Technology: Anaerobic; Single Component
- Type / Form: Gel
from Anti-Seize Technology
AST-SEAL ™HD (Heavy Duty) stainless steel grade is formulated for stainless steel alloy fittings to cure more quickly than standard grade anaerobic. Withstands temperatures from -65 ° to 400 °F (-54 ° to 204 °C) continuous, 500 °F (260 °C) intermittent. UL... [See More]
- Cure / Technology: Anaerobic; Single Component
- Substrate Compatibility: Metal
- Type / Form: Grease, Paste
- Features: Non-corrosive
from Henkel Corporation - Industrial
Wax-like, methacrylate ester acrylic is a tacking/dressing agent in a self-feeding stick for use in conjunction with cork and cut gaskets. LOCTITE ® 534 is a purple, wax-like, methacrylate ester acrylic is a tacking/dressing agent in a self-feeding stick for use in conjunction with cork and cut... [See More]
- Cure / Technology: Anaerobic; Single Component
- Use Temperature: 65 to 300
- Chemical System: Acrylic
from Anti-Seize Technology
AST-SEAL ™ HYD is an excellent sealant for straight metal threads and created to withstand hydraulic system pressures. It also exhibits high-temp and solvent resistance to water and non-polar solvents. Not for oxygen use. Features and Benefits: Non-shredding, non-contaminating. Made for... [See More]
- Cure / Technology: Anaerobic; Single Component
- Substrate Compatibility: Metal
- Type / Form: Liquid
- Industry: Construction
from Henkel Corporation - Industrial
Oxime silicone paste sealant used for sealing and bonding electrical/electronic components which offers resistance to moisture, chemicals and UV. LOCTITE ® SI 5011CL is a clear, oxime silicone paste sealant used for sealing and bonding electrical/electronic components which offers resistance to... [See More]
- Cure / Technology: Single Component; Room Temperature Vulcanizing or Curing
- Substrate Compatibility: Ceramic, Glass; Rubber or Elastomer; Wood
- Chemical System: Silicone
- Use Temperature: 75 to 500
from Anti-Seize Technology
AST-SEAL ™ HYD is an excellent sealant for straight metal threads and created to withstand hydraulic system pressures. It also exhibits high-temp and solvent resistance to water and non-polar solvents. Not for oxygen use. Features and Benefits: Non-shredding, non-contaminating. Made for... [See More]
- Cure / Technology: Anaerobic; Single Component
- Substrate Compatibility: Metal
- Type / Form: Liquid
- Industry: Construction
from Henkel Corporation - Industrial
Silicone black form-in-place or cure-in-place gasket/sealant for engine applications. Excellent bead height and profile. Easy to dispense. LOCTITE ® SI 5905 is a black, 2-part, thixotropic, oxime silicone, form-in-place gasket/sealant paste. The product can also be used for selected... [See More]
- Cure / Technology: Single Component; Room Temperature Vulcanizing or Curing
- Gap Fill: 0.2400
- Chemical System: Silicone
- Use Temperature: 65 to 500
from Anti-Seize Technology
AST-SEAL ™ HYD is an excellent sealant for straight metal threads and created to withstand hydraulic system pressures. It also exhibits high-temp and solvent resistance to water and non-polar solvents. Not for oxygen use. Features and Benefits: Non-shredding, non-contaminating. Made for... [See More]
- Cure / Technology: Anaerobic; Single Component
- Substrate Compatibility: Metal
- Type / Form: Liquid
- Industry: Construction
from Henkel Corporation - Industrial
UV-cured alkoxy silicone used for gasketing and sealing that requires a rapid-curing, post-applied sealant that facilitates immediate on-part inspection. LOCTITE ® SI 5089 is a straw-colored, medium viscosity, fluorescent UV-cured alkoxy silicone used for gasketing and sealing applications. It... [See More]
- Cure / Technology: UV or Radiation Cured; Single Component
- Type / Form: Liquid
- Chemical System: Silicone
- Features: Leveling Filling
from Anti-Seize Technology
AST-SEAL ™ PH is designed to resist all hydraulic fluids and seal Pneumatic/Hydraulic systems and is a thicker, non-running version of AST-SEAL ™ HYD for overhead or inside machinery applications. Not for oxygen use. Features and Benefits: Non-shredding, non-contaminating. Made for... [See More]
- Cure / Technology: Anaerobic; Single Component
- Substrate Compatibility: Metal
- Type / Form: Liquid
- Industry: Construction