Anaerobic Industrial Sealants
from Ellsworth Adhesives
HB Fuller Cyberbond Titan 7565 is a one component, anaerobic pipe sealant with PTFE, that is used for locking and sealing metal pipes and fittings. It provides low pressure sealing on tapered pipe threads. 250 mL Tube. [See More]
- Cure / Technology: Anaerobic; Single Component
- Viscosity: 175000 to 350000
- Substrate Compatibility: Metal
- Gap Fill: 0.0250
from Ellsworth Adhesives
Henkel Loctite 078 Threadlocker is a one component, low strength, low viscosity, acrylic adhesive. Used to lock and seal fine threaded studs in a wide variety of applications where very low locking strength is required. This product complies to MIL-S-22473 Grade H. 50 mL Bottle. [See More]
- Cure / Technology: Anaerobic; Single Component
- Viscosity: 10 to 25
- Features: Threadlocker or Retainer
- Thermal Conductivity: 0.1000
from Ellsworth Adhesives
Henkel Loctite 079 Threadlocker is a one component, low strength, medium viscosity, acrylic adhesive. Used to lock and seal nuts, bolts, and studs in a wide variety of applications where easy removal or adjustment is necessary. This product complies to MIL-S-22473. 50 mL Bottle. [See More]
- Cure / Technology: Anaerobic; Single Component
- Viscosity: 100 to 250
- Features: Threadlocker or Retainer
- Thermal Conductivity: 0.1000
from Ellsworth Adhesives
Henkel Loctite 080 Threadlocker is a one component, low strength, low viscosity, acrylic adhesive. Used to lock and seal fine threaded nuts, bolts and studs in a wide variety of applications requiring easy removal or adjustment. This product complies to MIL-S-22473E Grade E. 50 mL Bottle. [See More]
- Cure / Technology: Anaerobic; Single Component
- Viscosity: 10 to 25
- Features: Threadlocker or Retainer
- Thermal Conductivity: 0.1000
from Ellsworth Adhesives
Henkel Loctite 084 Threadlocker is a one component, medium strength, low viscosity, acrylic adhesive. Used to lock and seal fine threaded nuts, bolts and studs in a wide variety of applications where removal with ordinary hand tools in necessary. This product complies to MIL-S-22473E. 50 mL Bottle. [See More]
- Cure / Technology: Anaerobic; Single Component
- Viscosity: 10 to 25
- Features: Threadlocker or Retainer
- Thermal Conductivity: 0.1000
from Ellsworth Adhesives
Henkel Loctite 085 Threadlocker is a one component, medium strength, medium viscosity, acrylic adhesive. Used to lock and seal fine threaded nuts, bolts and studs in a wide variety of applications where removal with ordinary hand tools is necessary. This product complies to MIL-S-22473E. 50 mL... [See More]
- Cure / Technology: Anaerobic; Single Component
- Viscosity: 100 to 200
- Features: Threadlocker or Retainer
- Thermal Conductivity: 0.1000
from Ellsworth Adhesives
Henkel Loctite 087 Threadlocker is a one component, high strength, medium viscosity, acrylic adhesive. Used to lock and seal large coarse threaded nuts, bolts and studs in a wide variety of applications where high locking strength is required. This product complies to MIL-S-22473. 50 mL Bottle. [See More]
- Cure / Technology: Anaerobic; Single Component
- Viscosity: 100 to 250
- Features: Threadlocker or Retainer
- Thermal Conductivity: 0.1000
from Ellsworth Adhesives
Henkel Loctite 088 Threadlocker is a one component, high strength, low viscosity, acrylic adhesive. Used to lock and seal fine threaded nuts, bolts and studs in a wide variety of applications. This product complies to MIL-S-22473E. 50 mL Bottle. [See More]
- Cure / Technology: Anaerobic; Single Component
- Viscosity: 10 to 25
- Features: Threadlocker or Retainer
- Thermal Conductivity: 0.1000
from Ellsworth Adhesives
Henkel Loctite 089 Threadlocker is a one component, high strength, low viscosity, acrylic adhesive. Used to lock and seal fine threaded nuts, bolts and studs in a wide variety of applications. This product complies to MIL-S-22473. 50 mL Bottle. [See More]
- Cure / Technology: Anaerobic; Single Component
- Features: Threadlocker or Retainer
- Substrate Compatibility: Metal
- Viscosity: 10 to 25
from Ellsworth Adhesives
Henkel Loctite 220 Blue Threadlocker is a low strength anaerobic material designed for the locking and sealing of threaded fasteners which require normal disassembly with standard hand tools. 10 mL Bottle. [See More]
- Cure / Technology: Anaerobic; Single Component
- Viscosity: 10 to 30
- Features: Threadlocker or Retainer
from Ellsworth Adhesives
Henkel Loctite 220 Threadlocker is a one component, UV curing acrylic adhesive designed for the locking and sealing of threaded fasteners which require normal disassembly with standard hand tools. 250 mL Bottle. [See More]
- Cure / Technology: Anaerobic; Single Component
- Viscosity: 10 to 30
- Features: Threadlocker or Retainer
from Ellsworth Adhesives
Henkel Loctite 220 Blue Threadlocker is a low strength anaerobic material designed for the locking and sealing of threaded fasteners which require normal disassembly with standard hand tools. 50 mL Bottle. [See More]
- Cure / Technology: Anaerobic; Single Component
- Viscosity: 10 to 30
- Features: Threadlocker or Retainer
from Ellsworth Adhesives
Henkel Loctite 222 Threadlocker is a one component anaerobic material designed for the locking and sealing of threaded fasteners which require easy disassembly with standard hand tools. 10 mL Bottle. [See More]
- Cure / Technology: Anaerobic; Single Component
- Thermal Conductivity: 0.1000
- Features: Threadlocker or Retainer
from Ellsworth Adhesives
Henkel Loctite 222 Threadlocker is a one component anaerobic material designed for the locking and sealing of threaded fasteners which require easy disassembly with standard hand tools. 50 mL Bottle. [See More]
- Cure / Technology: Anaerobic; Single Component
- Thermal Conductivity: 0.1000
- Features: Threadlocker or Retainer
from Ellsworth Adhesives
Henkel Loctite 222MS Threadlocker is a one component acrylic adhesive designed for the locking and sealing of threaded fasteners that require easy disassembly with standard hand tools. This product complies to MIL-S-46163A. 0.5 mL Capsule. [See More]
- Cure / Technology: Anaerobic; Single Component
- Viscosity: 800 to 5000
- Features: Threadlocker or Retainer
- Thermal Conductivity: 0.1000
from Ellsworth Adhesives
Henkel Loctite 222MS Threadlocker is a one component acrylic adhesive designed for the locking and sealing of threaded fasteners that require easy disassembly with standard hand tools. This product complies to MIL-S-46163A. 10 mL Bottle. [See More]
- Cure / Technology: Anaerobic; Single Component
- Viscosity: 800 to 5000
- Features: Threadlocker or Retainer
- Thermal Conductivity: 0.1000
from Ellsworth Adhesives
Henkel Loctite 222MS Threadlocker is a one component acrylic adhesive designed for the locking and sealing of threaded fasteners that require easy disassembly with standard hand tools. This product complies to MIL-S-46163A. 250 mL Bottle. [See More]
- Cure / Technology: Anaerobic; Single Component
- Viscosity: 800 to 5000
- Features: Threadlocker or Retainer
- Thermal Conductivity: 0.1000
from Ellsworth Adhesives
Henkel Loctite 222MS Threadlocker is a one component acrylic adhesive designed for the locking and sealing of threaded fasteners that require easy disassembly with standard hand tools. This product complies to MIL-S-46163A. 50 mL Bottle. [See More]
- Cure / Technology: Anaerobic; Single Component
- Viscosity: 800 to 5000
- Features: Threadlocker or Retainer
- Thermal Conductivity: 0.1000
from Ellsworth Adhesives
Henkel Loctite 242 Blue Threadlocker is designed for locking and sealing of threaded fasteners which require normal disassembly with standard hand tools. This product complies to MIL-S-46163A. 1/2 mL Capsule. [See More]
- Cure / Technology: Anaerobic; Single Component
- Viscosity: 800 to 5000
- Features: Threadlocker or Retainer
from Techsil Limited
TB1133E is a solventless one-component, anaerobic type liquid gasket with low odour and irritation. The product will cure when compressed between two metallic surfaces and isolated from oxygen, and an elastic gasket is formed within a very short time being completely adapted to the surface structure... [See More]
- Cure / Technology: Anaerobic
from Anti-Seize Technology
AST-SEAL ™HD (Heavy Duty) stainless steel grade is formulated for stainless steel alloy fittings to cure more quickly than standard grade anaerobic. Withstands temperatures from -65 ° to 400 °F (-54 ° to 204 °C) continuous, 500 °F (260 °C) intermittent. UL... [See More]
- Cure / Technology: Anaerobic; Single Component
- Substrate Compatibility: Metal
- Type / Form: Grease, Paste
- Features: Non-corrosive
from Hi-Tech Seals, Inc.
HERNON ® ’s line of Dripstop ® sealants for plumbing, refrigeration and hydraulics are engineered with many advantages over conventional pipe dopes. These materials harden without shrinkage in the joints creating a tough, insoluble, vibration proof seal that will not leak even if... [See More]
- Cure / Technology: Anaerobic; Single Component
- Type / Form: Grease, Paste
- Chemical System: Acrylic
- Substrate Compatibility: Metal
from ND Industries, Inc.
Anaerobic Gasket Makers alleviate the need for preformed gaskets. Remaining liquid when exposed to air, they cure when confined between mating flanges. Typically used on thermostats, pumps, gearboxes, compressors, transmission housings, axle covers and more [See More]
- Cure / Technology: Anaerobic; Single Component
- Type / Form: Liquid
- Chemical System: Silicone
- Substrate Compatibility: Metal
from Swagelok Company
SWAK Anaerobic Thread Sealant, 250 cm3 Tube [See More]
- Cure / Technology: Anaerobic
- Industry: Construction
- Features: Threadlocker or Retainer
from ACCRAbond, Inc.
INSTAbond ® 390 - Low pressure instant gasketing compound for gap seals to 0.03" [See More]
- Cure / Technology: Anaerobic
- Viscosity: 200000 to 500000
- Type / Form: Liquid
- Use Temperature: -65 to 300
from DME Company
Resists Corrosion, Leakage and Loosening From Vibration and Moisture. Anaerobic Sealant Chemically Cures In The Absence of Air. Use From -65 ˚F To +350 ˚F. Allows Final Adjustments Up To 24 Hours After Application. Use For Hydraulics, Pneumatics, Process Piping or Steam. Locks And Seals... [See More]
- Cure / Technology: Anaerobic
- Substrate Compatibility: Metal; Dissimilar Substrates
- Type / Form: Grease, Paste
- Features: Threadlocker or Retainer
from Chemence Inc.
Krylex KT722 is a high strength, high viscosity, high service temperature, anaerobic thread locker. KT722 cures when confined in the absence of air between close-fitting metal surfaces. KT722 is formulated to lock all metric and imperial nuts and bolts, preventing vibration loosening and leakage... [See More]
- Cure / Technology: Anaerobic; Two Component (optional feature); Single Component
- Substrate Compatibility: Metal
- Type / Form: Liquid
- Features: Gap Filler, Foam in Place Gasket; Threadlocker or Retainer
from Henkel Corporation - Industrial
Medium-strength, general purpose gasketing product - excellent contamination tolerance. Ideal for use on casted iron, steel and aluminum flanges. LOCTITE ® 518 cures when confined in the absence of air between close-fitting metal surfaces. It is an anaerobic gasketing material designed for use... [See More]
- Cure / Technology: Anaerobic
- Gap Fill: 0.0120
- Substrate Compatibility: Metal
- Use Temperature: 65 to 300
from Anti-Seize Technology
AST-SEAL ™HD (Heavy Duty) stainless steel grade is formulated for stainless steel alloy fittings to cure more quickly than standard grade anaerobic. Withstands temperatures from -65 ° to 400 °F (-54 ° to 204 °C) continuous, 500 °F (260 °C) intermittent. UL... [See More]
- Cure / Technology: Anaerobic; Single Component
- Substrate Compatibility: Metal
- Type / Form: Grease, Paste
- Features: Non-corrosive
from Hi-Tech Seals, Inc.
The Nuts N ’ Bolts is an anaerobic adhesive, used in nut and bolt assemblies. When the adhesive is confined between substrates, the oxygen is eliminated and the adhesive cures. These thread locking adhesives offer a wide-range of strengths, viscosities, and temperature ranges for just about... [See More]
- Cure / Technology: Anaerobic; Single Component
- Type / Form: Liquid
- Chemical System: Acrylic
- Substrate Compatibility: Metal
from ND Industries, Inc.
Vibra-Tite anaerobic retaining compounds are designed to increase shear strength on non-threaded cylindrical metal assemblies. The liquid anaerobic material fills the voids between close-fitting metal parts and cures to a toughened thermoset-plastic which creates a solid one piece assembly. [See More]
- Cure / Technology: Anaerobic; Single Component
- Substrate Compatibility: Metal
- Type / Form: Liquid
- Features: Gap Filler, Foam in Place Gasket; Threadlocker or Retainer
from Chemence Inc.
KG105 is a single component, thixotropic, low-medium strength, high temperature anaerobic gasket compound. KG105 cures rapidly when confined in the absence of air on close-fitting metal surfaces. KG105 will give an almost instant low-pressure seal (up to 0.5 Bar after 20 mins.) to allow on-line... [See More]
- Cure / Technology: Anaerobic; Two Component (optional feature); Single Component
- Substrate Compatibility: Metal
- Type / Form: Grease, Paste
- Features: Gap Filler, Foam in Place Gasket
from Henkel Corporation - Industrial
Methacrylate ester acrylic paste which improves flange-sealing reliability. It provides a tough, resilient, solvent and temperature resistant seal LOCTITE ® 5127 is a blue methacrylate ester acrylic paste which improves flange-sealing reliability. After curing between mating metal flanges, it... [See More]
- Cure / Technology: Anaerobic; Single Component
- Viscosity: ? to 500000
- Chemical System: Acrylic
- Gap Fill: 0.0100
from Anti-Seize Technology
AST-SEAL ™HD (Heavy Duty) stainless steel grade is formulated for stainless steel alloy fittings to cure more quickly than standard grade anaerobic. Withstands temperatures from -65 ° to 400 °F (-54 ° to 204 °C) continuous, 500 °F (260 °C) intermittent. UL... [See More]
- Cure / Technology: Anaerobic; Single Component
- Substrate Compatibility: Metal
- Type / Form: Grease, Paste
- Features: Non-corrosive
from Hi-Tech Seals, Inc.
HERNON ® offers a complete line of ultraviolet curing adhesives and compounds, the Ultrabond ® line of products. These products are single component systems offering either ultraviolet light or ultraviolet light & primer initiated curing mechanisms. All Ultrabond ® products cure upon... [See More]
- Cure / Technology: Anaerobic; UV or Radiation Cured; Single Component
- Type / Form: Liquid
- Chemical System: Acrylic
- Features: Gap Filler, Foam in Place Gasket
from ND Industries, Inc.
Vibra-Tite anaerobic thread sealants secure metal pipes and fittings by filling the space between threaded metal parts. Thread sealants prevent leakage caused by tape shredding, vibration loosening, solvent evaporation, and damaged threads. Vibra-Tite products are designed for both low and high... [See More]
- Cure / Technology: Anaerobic; Single Component
- Substrate Compatibility: Metal
- Type / Form: Liquid
- Features: Gap Filler, Foam in Place Gasket; Threadlocker or Retainer
from Henkel Corporation - Industrial
Industrial, anaerobic, rigid flange polyacrylate sealant. This gel-like anaerobic material is intended for use in place of a wide variety of pre-formed, pre-cut gaskets. LOCTITE ® 504 is an industrial, anaerobic, rigid flange polyacrylate sealant. This gel-like anaerobic material is intended... [See More]
- Cure / Technology: Anaerobic; Single Component
- Type / Form: Gel
from Anti-Seize Technology
AST-SEAL ™HD (Heavy Duty) stainless steel grade is formulated for stainless steel alloy fittings to cure more quickly than standard grade anaerobic. Withstands temperatures from -65 ° to 400 °F (-54 ° to 204 °C) continuous, 500 °F (260 °C) intermittent. UL... [See More]
- Cure / Technology: Anaerobic; Single Component
- Substrate Compatibility: Metal
- Type / Form: Grease, Paste
- Features: Non-corrosive
from Henkel Corporation - Industrial
Gasketing Product- high temperature and chemical resistance. Ideal for use on rigid flanges. LOCTITE ® 510 is a high temperature resistant anaerobic sealant which cures when confined in the absence of air between close-fitting metal surfaces. Typical applications include sealing rigid flange... [See More]
- Cure / Technology: Anaerobic
- Gap Fill: 0.0100
- Substrate Compatibility: Metal
- Use Temperature: 65 to 400
from Anti-Seize Technology
AST-SEAL ™HD (Heavy Duty) stainless steel grade is formulated for stainless steel alloy fittings to cure more quickly than standard grade anaerobic. Withstands temperatures from -65 ° to 400 °F (-54 ° to 204 °C) continuous, 500 °F (260 °C) intermittent. UL... [See More]
- Cure / Technology: Anaerobic; Single Component
- Substrate Compatibility: Metal
- Type / Form: Grease, Paste
- Features: Non-corrosive
from Henkel Corporation - Industrial
Wax-like, methacrylate ester acrylic is a tacking/dressing agent in a self-feeding stick for use in conjunction with cork and cut gaskets. LOCTITE ® 534 is a purple, wax-like, methacrylate ester acrylic is a tacking/dressing agent in a self-feeding stick for use in conjunction with cork and cut... [See More]
- Cure / Technology: Anaerobic; Single Component
- Use Temperature: 65 to 300
- Chemical System: Acrylic
from Anti-Seize Technology
AST-SEAL ™HD (Heavy Duty) stainless steel grade is formulated for stainless steel alloy fittings to cure more quickly than standard grade anaerobic. Withstands temperatures from -65 ° to 400 °F (-54 ° to 204 °C) continuous, 500 °F (260 °C) intermittent. UL... [See More]
- Cure / Technology: Anaerobic; Single Component
- Substrate Compatibility: Metal
- Type / Form: Grease, Paste
- Features: Non-corrosive
from Henkel Corporation - Industrial
LOCTITE ® 5110 Porosity Sealant, electrical grade anaerobic sealant in which no solvents exist and ionic contaminants are minimized in its monomer (liquid) state, providing excellent insulating properties in its polymer form. This material also maintains its integrity in harsh chemical... [See More]
- Cure / Technology: Anaerobic
from Anti-Seize Technology
AST-SEAL ™ HYD is an excellent sealant for straight metal threads and created to withstand hydraulic system pressures. It also exhibits high-temp and solvent resistance to water and non-polar solvents. Not for oxygen use. Features and Benefits: Non-shredding, non-contaminating. Made for... [See More]
- Cure / Technology: Anaerobic; Single Component
- Substrate Compatibility: Metal
- Type / Form: Liquid
- Industry: Construction
from Henkel Corporation - Industrial
Surface Preparation - activator. Solvent-based. Low temperature curing. LOCTITE ® SF 7649 is designed to promote the curing speed of LOCTITE anaerobic adhesives and sealants without any significant loss of joint strength. It is especially recommended for applications with passive metals or... [See More]
- Cure / Technology: Anaerobic
- Features: Threadlocker or Retainer
- Chemical System: Acrylic
- Industry: Military
from Anti-Seize Technology
AST-SEAL ™ HYD is an excellent sealant for straight metal threads and created to withstand hydraulic system pressures. It also exhibits high-temp and solvent resistance to water and non-polar solvents. Not for oxygen use. Features and Benefits: Non-shredding, non-contaminating. Made for... [See More]
- Cure / Technology: Anaerobic; Single Component
- Substrate Compatibility: Metal
- Type / Form: Liquid
- Industry: Construction
from Henkel Corporation - Industrial
An anaerobic sealant specifically designed for sealing and retaining engine cup plugs. [See More]
- Cure / Technology: Anaerobic
- Use Temperature: 65 to 300
- Features: Leveling Filling
from Anti-Seize Technology
AST-SEAL ™ HYD is an excellent sealant for straight metal threads and created to withstand hydraulic system pressures. It also exhibits high-temp and solvent resistance to water and non-polar solvents. Not for oxygen use. Features and Benefits: Non-shredding, non-contaminating. Made for... [See More]
- Cure / Technology: Anaerobic; Single Component
- Substrate Compatibility: Metal
- Type / Form: Liquid
- Industry: Construction
from Henkel Corporation - Industrial
Thixotropic, methacrylate ester acrylic thread sealant liquid designed for threaded fittings commonly found in hydraulic and pneumatic systems. LOCTITE ® 5452 is a purple, thixotropic, methacrylate ester acrylic thread sealant liquid designed for threaded fittings commonly found in hydraulic... [See More]
- Cure / Technology: Anaerobic; Single Component
- Type / Form: Liquid
- Chemical System: Acrylic
- Features: Leveling Filling
from Anti-Seize Technology
AST-SEAL ™ PH is designed to resist all hydraulic fluids and seal Pneumatic/Hydraulic systems and is a thicker, non-running version of AST-SEAL ™ HYD for overhead or inside machinery applications. Not for oxygen use. Features and Benefits: Non-shredding, non-contaminating. Made for... [See More]
- Cure / Technology: Anaerobic; Single Component
- Substrate Compatibility: Metal
- Type / Form: Liquid
- Industry: Construction
from Henkel Corporation - Industrial
Methacrylate ester acrylic thread sealant which provides maximum solvent resistance on threaded fittings and pipes up to 2 in (50 mm) in diameter. LOCTITE ® 554 is a red, methacrylate ester acrylic thread sealant liquid which provides maximum solvent resistance on threaded fittings and pipes up... [See More]
- Cure / Technology: Anaerobic; Single Component
- Type / Form: Liquid
- Chemical System: Acrylic
- Viscosity: 2500
from Anti-Seize Technology
AST-SEAL ™ PH is designed to resist all hydraulic fluids and seal Pneumatic/Hydraulic systems and is a thicker, non-running version of AST-SEAL ™ HYD for overhead or inside machinery applications. Not for oxygen use. Features and Benefits: Non-shredding, non-contaminating. Made for... [See More]
- Cure / Technology: Anaerobic; Single Component
- Substrate Compatibility: Metal
- Type / Form: Liquid
- Industry: Construction
from Henkel Corporation - Industrial
White sealant, ideal toolbox product for all metal fittings that won ’t spill or leak. NSF approved. LOCTITE ® 561 is an white, semi-solid methacrylate thread sealant stick, an ideal toolbox product for maintenance and repair that won ’t spill or leak. Fast, reliable curing on... [See More]
- Cure / Technology: Anaerobic; Single Component
- Use Temperature: 65 to 300
- Substrate Compatibility: Metal
from Anti-Seize Technology
AST-SEAL ™ PH is designed to resist all hydraulic fluids and seal Pneumatic/Hydraulic systems and is a thicker, non-running version of AST-SEAL ™ HYD for overhead or inside machinery applications. Not for oxygen use. Features and Benefits: Non-shredding, non-contaminating. Made for... [See More]
- Cure / Technology: Anaerobic; Single Component
- Substrate Compatibility: Metal
- Type / Form: Liquid
- Industry: Construction
from Henkel Corporation - Industrial
White to off-white, 1-part, low strength, high viscosity, anaerobically-cured, methacrylate ester, acrylic thread sealant LOCTITE ® 565 is a white to off-white, 1-part, low strength, high viscosity, anaerobically-cured, methacrylate ester, acrylic thread sealant designed for the locking and... [See More]
- Cure / Technology: Anaerobic
- Viscosity: 300000
- Features: UL Rating
- Use Temperature: 65 to 300
from Anti-Seize Technology
AST-SEAL ™ Std (Standard Grade) is a general-purpose pipe sealant providing an instant permanent seal that cures in the absence of air to lock threads securely. Withstands temperatures from -65 ° to 300 °F (-54 ° to 149 °C) continuous, 375 °F (191 °C)... [See More]
- Cure / Technology: Anaerobic; Single Component
- Substrate Compatibility: Metal
- Type / Form: Grease, Paste
- Features: Non-corrosive
from Henkel Corporation - Industrial
Dimethacrylate ester acrylic thread sealant which is recommended for industrial applications in many industries. LOCTITE ® 5671 is an off-white to tan colored, waxy consistency, fluorescent dimethacrylate ester acrylic thread sealant. It is recommended for industrial applications in the... [See More]
- Cure / Technology: Anaerobic; Single Component
- Substrate Compatibility: Metal
- Chemical System: Acrylic
- Features: Threadlocker or Retainer
from Anti-Seize Technology
AST-SEAL ™ Std (Standard Grade) is a general-purpose pipe sealant providing an instant permanent seal that cures in the absence of air to lock threads securely. Withstands temperatures from -65 ° to 300 °F (-54 ° to 149 °C) continuous, 375 °F (191 °C)... [See More]
- Cure / Technology: Anaerobic; Single Component
- Substrate Compatibility: Metal
- Type / Form: Grease, Paste
- Features: Non-corrosive
from Henkel Corporation - Industrial
Methacrylate acrylic adhesive paste designed for locking and sealing metal pipes and fittings which is particularly suitable for stainless steel. LOCTITE ® 5802 is an off-white to peach-colored methacrylate acrylic adhesive paste designed for locking and sealing metal pipes and fittings. It is... [See More]
- Cure / Technology: Anaerobic
- Use Temperature: 65 to 300
from Anti-Seize Technology
AST-SEAL ™ Std (Standard Grade) is a general-purpose pipe sealant providing an instant permanent seal that cures in the absence of air to lock threads securely. Withstands temperatures from -65 ° to 300 °F (-54 ° to 149 °C) continuous, 375 °F (191 °C)... [See More]
- Cure / Technology: Anaerobic; Single Component
- Substrate Compatibility: Metal
- Type / Form: Grease, Paste
- Features: Non-corrosive
from Henkel Corporation - Industrial
Sealant paste designed for metal threaded pipes and fittings in industrial applications which is particularly suitable for sealing steel metal joints. LOCTITE ® 5770 is an off-white to purplish gray dimethacrylate ester acrylic sealant paste designed for locking and sealing metal threaded pipes... [See More]
- Cure / Technology: Anaerobic; Single Component
- Use Temperature: 65 to 530
- Features: Threadlocker or Retainer
from Anti-Seize Technology
AST-SEAL ™ Std (Standard Grade) is a general-purpose pipe sealant providing an instant permanent seal that cures in the absence of air to lock threads securely. Withstands temperatures from -65 ° to 300 °F (-54 ° to 149 °C) continuous, 375 °F (191 °C)... [See More]
- Cure / Technology: Anaerobic; Single Component
- Substrate Compatibility: Metal
- Type / Form: Grease, Paste
- Features: Non-corrosive
from Henkel Corporation - Industrial
Reactive monomer-based, solvent-free dimethacrylate ester surface primer paste for LOCTITE anaerobic adhesives and sealants supplied in stick form. LOCTITE ® SF 7088 is a turquoise, reactive monomer-based, solvent-free dimethacrylate ester surface primer paste for LOCTITE anaerobic adhesives... [See More]
- Cure / Technology: Anaerobic; Single Component
- Features: Threadlocker or Retainer
from Anti-Seize Technology
AST-SEAL ™ Std (Standard Grade) is a general-purpose pipe sealant providing an instant permanent seal that cures in the absence of air to lock threads securely. Withstands temperatures from -65 ° to 300 °F (-54 ° to 149 °C) continuous, 375 °F (191 °C)... [See More]
- Cure / Technology: Anaerobic; Single Component
- Substrate Compatibility: Metal
- Type / Form: Grease, Paste
- Features: Non-corrosive
from Anti-Seize Technology
AST-SEAL ™ Std (Standard Grade) is a general-purpose pipe sealant providing an instant permanent seal that cures in the absence of air to lock threads securely. Withstands temperatures from -65 ° to 300 °F (-54 ° to 149 °C) continuous, 375 °F (191 °C)... [See More]
- Cure / Technology: Anaerobic; Single Component
- Substrate Compatibility: Metal
- Type / Form: Grease, Paste
- Features: Non-corrosive
from Anti-Seize Technology
Primer for use with most AST-LOCK ™/AST-SEAL ™ anaerobic compounds: AST-LOCK ™ PRIMER T is Heptane Based and fast acting. Lasts up to 7 days on part life. Viscosity: 3 Cps. Flash Point: 0 ºF. Color: Green. P/N: 39008 [See More]
- Cure / Technology: Anaerobic; Single Component
- Substrate Compatibility: Metal
- Type / Form: Liquid
- Industry: Primer for AST-SEAL