Grease / Paste Industrial Sealants
from Thermon, Inc
T-3 heat transfer compound now has higher temperature ratings than ever before while still creating an efficient thermal bond between a steam or electric heater and process pipes or equipment. A single "Thermonized ™"steam tracer utilizing Thermon's heat transfer compound is more cost... [See More]
- Type / Form: Grease, Paste
- Features: Gap Filler, Foam in Place Gasket; Thermally Conductive
- Cure / Technology: Single Component
- Use Temperature: 32 to 850
from RS Components, Ltd.
Araldite 2015-1 200ml [See More]
- Type / Form: Grease, Paste
- Chemical System: Epoxy
from ELANTAS North America LLC
ELANTAS PDG, Inc., founded in 1919 and based in St. Louis, Missouri, is a premier global supplier of specialty resins for applications in the electrical and electronic industries. ELANTAS Electrical Insulation companies are respected as the market leaders in the development and manufacturing of wire... [See More]
- Type / Form: Grease, Paste
- Composition: Filled
- Chemical System: Epoxy
- Cure / Technology: Thermoset; Two Component
from Master Bond, Inc.
Master Bond Polymer System EP22 is an aluminum filled, two component epoxy adhesive for high performance bonding, sealing, and coating. It is formulated to cure at room temperature or more rapidly at elevated temperatures, with a non-critical one-to-one mix ratio by weight or volume. The EP22... [See More]
- Type / Form: Grease, Paste
- Composition: Filled
- Chemical System: Epoxy
- Cure / Technology: Thermoset; Two Component
from RS Components, Ltd.
Araldite 2015-1 2kg [See More]
- Type / Form: Grease, Paste
- Chemical System: Epoxy
from Master Bond, Inc.
EP41S-5ND Black is a two part, NASA low outgassing rated epoxy, with outstanding chemical resistance to acids, bases, alcohols and fuels. [See More]
- Type / Form: Grease, Paste
- Composition: Unfilled
- Chemical System: Epoxy
- Cure / Technology: Thermoset; Two Component ; Room Temperature Vulcanizing or Curing
from Master Bond, Inc.
Master Bond Polymer System EP41S-1 is a two component epoxy resin system designed for durable, high performance bonding, sealing, coating and encapsulating. EP41S-1 is formulated to cure at ambient temperatures or more quickly at elevated temperatures. It successfully withstands prolonged immersion... [See More]
- Type / Form: Grease, Paste
- Composition: Unfilled
- Chemical System: Epoxy
- Cure / Technology: Thermoset; Two Component
from Master Bond, Inc.
MasterSil 973S-LO is a two component, silver filled silicone with superb electrical and thermal conductivity. Its exceptionally low volume resistivity allows it to be used for many different applications involving bonding, sealing and coating. It is a paste like system with minimal flow. Its... [See More]
- Type / Form: Grease, Paste
- Composition: Filled
- Chemical System: Silicone
- Cure / Technology: Thermoset; Two Component ; Addition Cure
from Master Bond, Inc.
Master Bond Polymer System Supreme 3HTND-1SM is a one component, exceptionally fast curing surface mount adhesive system with exceptional toughness and durability. It has high shear and peel strength for optimal bonding performance and is formulated to cure rapidly (5-10 minutes at 300 °F,... [See More]
- Type / Form: Grease, Paste
- Composition: Unfilled
- Chemical System: Epoxy
- Cure / Technology: Thermoset; Two Component
from Master Bond, Inc.
Master Bond Polymer System EP3HT is a one component system featuring high shear strength, good temperature resistance along with a fast cure schedule. Typical curing schedules are 5-10 minutes at 300 °F or 20-30 minutes at 250 °F (minimum cure temperature is 235 °F-240 °F). Tensile... [See More]
- Type / Form: Grease, Paste
- Composition: Unfilled
- Chemical System: Epoxy
- Cure / Technology: Thermoset; Single Component
from Master Bond, Inc.
Master Bond Polymer System EP39-2 is a fast curing, low viscosity, optically clear two component epoxy system for high performance bonding, sealing, coating and casting. It is 100% reactive and does not contain any diluents, solvents or other volatiles. The mix ratio is a convenient 2 to 1 by... [See More]
- Type / Form: Grease, Paste
- Composition: Unfilled
- Chemical System: Epoxy
- Cure / Technology: Thermoset; Two Component
from Master Bond, Inc.
Master Bond Polymer System EP31 is a two component room temperature curing epoxy for high performance structural bonding applications featuring lap shear strengths exceeding 4500 psi. In addition, unlike many structural epoxies, EP31 also has a high peel strength exceeding 40 pli. The service... [See More]
- Type / Form: Grease, Paste
- Cure / Technology: Thermoset; Two Component
- Chemical System: Epoxy
- Substrate Compatibility: Ceramic, Glass; Concrete, Masonry; Composites; Metal; Plastic; Porous Surfaces; Rubber or Elastomer; Dissimilar Substrates; Metal/Plastic/Glass/Ceramic/Elast.&Wood
from Master Bond, Inc.
Master Bond Polymer System EP45HT is a two component epoxy system for high performance structural bonding and casting. It is suitable for applications where long term exposure to temperatures from -80 °F to +500 °F is required. lt is 100% reactive and does not contain any solvents or... [See More]
- Type / Form: Grease, Paste
- Composition: Unfilled
- Chemical System: Epoxy
- Cure / Technology: Thermoset; Two Component
from Master Bond, Inc.
Master Bond Polymer System 125 is a two component toughened epoxy resin for prolonged service above 500 °F with truly outstanding chemical resistance. High strength bonds serviceable up to 600 °F can be obtained with this exceptionally thermally stable and chemically resistant epoxy resin... [See More]
- Type / Form: Grease, Paste; Powder
- Composition: Unfilled
- Chemical System: Epoxy
- Cure / Technology: Thermoset; Two Component
from Master Bond, Inc.
Master Bond Polymer Adhesive EP33 is a unique room temperature curing two component epoxy adhesive for high temperature bonding applications. It is formulated to cure at room temperature or more rapidly at elevated temperatures. Master Bond Polymer Adhesive EP33 produces high strength bonds whose... [See More]
- Type / Form: Grease, Paste
- Composition: Unfilled
- Chemical System: Epoxy
- Cure / Technology: Thermoset; Two Component
from Master Bond, Inc.
Master Bond Polymer System EP15 is a one component heat curing epoxy featuring high tensile strength that is utilized in testing the adhesion or cohesive strength of flame-sprayed coatings. This standard test is fully detailed in ASTM specification C 633. EP15 is formulated to cure at temperatures... [See More]
- Type / Form: Grease, Paste
- Composition: Unfilled
- Chemical System: Epoxy
- Cure / Technology: Thermoset; Single Component
from Master Bond, Inc.
Master Bond Polymer System EP29LP is a two component high performance epoxy resin system featuring low viscosity, long pot life and low exotherm. As an adhesive this versatile material will form bond strengths in excess of 2,500 psi (aluminum to aluminum). It bonds well to a variety of substrates... [See More]
- Type / Form: Grease, Paste
- Composition: Unfilled
- Chemical System: Epoxy
- Cure / Technology: Thermoset; Two Component
from Master Bond, Inc.
Master Bond Polymer System EP38 is a fast curing, low viscosity, optically clear two component epoxy system for high performance coating, bonding and sealing. It is 100% reactive and does not contain any volatiles. The mix ratio is a convenient 3 to 1 by weight. EP38 is very fast curing. Coatings as... [See More]
- Type / Form: Grease, Paste
- Composition: Unfilled
- Chemical System: Epoxy
- Cure / Technology: Thermoset; Two Component
from Master Bond, Inc.
Master Bond Polymer System EP76M is a two component, nickel filled, electrically conductive adhesive for high performance bonding, sealing, and coating formulated to cure at room temperature or more rapidly at elevated temperatures. Unlike the majority of two part nickel conductive systems, EP76M... [See More]
- Type / Form: Grease, Paste
- Composition: Filled
- Chemical System: Epoxy
- Cure / Technology: Thermoset; Two Component
from Master Bond, Inc.
Supreme 3HTND-2DM is a rapid curing, toughened, one part epoxy system used for the dam-and-fill method for chip-on-board encapsulation. It passes ASTM E595 specifications for NASA low outgassing allowing it to be used in vacuum, aerospace, electro-optic and other related applications. Supreme... [See More]
- Type / Form: Grease, Paste
- Composition: Unfilled
- Chemical System: Epoxy
- Cure / Technology: Thermoset; Single Component
from Master Bond, Inc.
Master Bond Polymer System EP17 is a toughened one component heat curing epoxy resin system featuring high shear strength and very high temperature resistance. This one component system is formulated to cure at a minimum temperature of 300 °F to 350 °F for 60-90 minutes. Post curing for 1... [See More]
- Type / Form: Grease, Paste
- Composition: Unfilled
- Chemical System: Epoxy
- Cure / Technology: Thermoset; Single Component
from Master Bond, Inc.
Master Bond Polymer System EP77M-1 is a two component, silver filled, electrically conductive adhesive for high performance bonding and sealing formulated to cure at room temperature or more rapidly at elevated temperatures. It readily develops a high bonding strength of more than 2000 psi tensile... [See More]
- Type / Form: Grease, Paste
- Composition: Filled
- Chemical System: Epoxy
- Cure / Technology: Thermoset; Two Component
from Master Bond, Inc.
Master Bond Polymer System EP79 is a two component, silver coated nickel filled, electrically conductive adhesive for high performance bonding and sealing formulated to cure at room temperature or more rapidly at elevated temperatures. EP79 offers a convenient one-to-one mix ratio by weight or... [See More]
- Type / Form: Grease, Paste
- Composition: Filled
- Chemical System: Epoxy
- Cure / Technology: Thermoset; Two Component
from Master Bond, Inc.
Featuring a low volume resistivity of 5-10 ohm-cm, EP21TDCN-LO is a nickel conductive system for high performance bonding and sealing applications. This smooth paste formulation is easy to handle and has a one to one mix ratio by weight or volume. It is a toughened system, formulated to withstand... [See More]
- Type / Form: Grease, Paste
- Composition: Filled
- Chemical System: Epoxy
- Cure / Technology: Thermoset; Two Component ; Room Temperature Vulcanizing or Curing
from Anti-Seize Technology
AST-SEAL ™HD (Heavy Duty) stainless steel grade is formulated for stainless steel alloy fittings to cure more quickly than standard grade anaerobic. Withstands temperatures from -65 ° to 400 °F (-54 ° to 204 °C) continuous, 500 °F (260 °C) intermittent. UL... [See More]
- Type / Form: Grease, Paste
- Substrate Compatibility: Metal
- Cure / Technology: Anaerobic; Single Component
- Features: Non-corrosive
from Sherwin-Williams Protective & Marine Coatings
ArmorSeal ®CRACK FILLER is a two-component, fast set epoxy paste developed specifically for sealing, smoothing, and fairing applications on concrete, metals, plastics (FRP), wood, or masonry. The smooth consistency and excellent non-sagging properties allow the product to be used on vertical and... [See More]
- Type / Form: Grease, Paste
- Composition: Unfilled
- Chemical System: Epoxy
- Cure / Technology: Thermoset; Two Component
from Wacker Chemical Corp.
GENIOSIL® XM 25 is a gamma-silane-terminated polymer and particularly targets sealant applications, especially where low-modulus products with high recovery are desirable. Used as a co-binder - in combination with one of the conventional silane-modified polymers (GENIOSIL® STP-E range) - GENIOSIL®... [See More]
- Type / Form: Grease, Paste
- Cure / Technology: Single Component
- Chemical System: Silicone
- Industry: Construction
from Sauereisen, Inc.
Sauereisen Aluseal Adhesive Cement No. 2 is a ceramic cement paste offering good bond strength and thermal shock. resistant properties for assembling, sealing and cementing porcelain, glass, metal and other materials. Its fine particle size. and excellent flow characteristics make No. 2 a good... [See More]
- Type / Form: Grease, Paste
- Composition: Unfilled
- Chemical System: Ceramic
- Cure / Technology: Air Setting / Film Drying; Single Component
from Acoustical Solutions, Inc.
Acoustical Caulk is a non-flammable, latex based sealant specially designed for the reduction of sound transmission and drafts in all types of wall systems. Acoustical Caulk remains flexible and adheres firmly to wood, metal studs, concrete, gypsum board and most other building materials. Acoustical... [See More]
- Type / Form: Grease, Paste
- Cure / Technology: Thermoset; Single Component
- Chemical System: Elastomeric
- Substrate Compatibility: Concrete, Masonry; Metal; Paper or Paperboard; Wood; Dissimilar Substrates; Gypsum Board
from Aremco Products, Inc.
Used for repairing metal components, pinholes, cracks, and filling seams. [See More]
- Type / Form: Grease, Paste
- Composition: Filled
- Chemical System: Ceramic
- Cure / Technology: Air Setting / Film Drying; Thermoset
from Hi-Tech Seals, Inc.
HERNON ® ’s line of Dripstop ® sealants for plumbing, refrigeration and hydraulics are engineered with many advantages over conventional pipe dopes. These materials harden without shrinkage in the joints creating a tough, insoluble, vibration proof seal that will not leak even if... [See More]
- Type / Form: Grease, Paste
- Cure / Technology: Anaerobic; Single Component
- Chemical System: Acrylic
- Substrate Compatibility: Metal
from Epoxy Technology
Thermally Conductive Adhesives (TCAs) are electrically insulating materials that conduct heat as an adhesive or encapsulant. These products are typically oven cured or set at room temperature and are available in a range of viscosities. Our TCAs are well known for resisting hostile environments,... [See More]
- Type / Form: Grease, Paste
- Cure / Technology: Thermoset; Two Component
- Chemical System: Epoxy
- Substrate Compatibility: Ceramic, Glass; Metal; Plastic
from Bluestar Silicones USA Corp.
Stiff, Tacky Dielectric Compound Lubricant and Sealant. Description. Bluesil V-711 is a silica-thickened, high molecular weight dimethyl silicone compound. It is a non-curing grease-like paste with a tacky, stiff consistency. Bluesil V-711 possesses excellent dielectric properties and is useful for... [See More]
- Type / Form: Grease, Paste
- Use Temperature: -67 to 400
- Features: High Dielectric
- Dielectric Strength: 503
from Shiu Li Technology Co., Ltd
LiPOLY's TPS series is a low-density, potting material. Its low density and lightweight properties enhance product performance, reduce production costs. The product has a thermal conductivity of 0.55-1.50 W/m*K and can cure at room temperature or high temperatures. [See More]
- Type / Form: Grease, Paste; Liquid
- Cure / Technology: Room Temperature Vulcanizing or Curing
- Chemical System: Silicone
- Features: Encapsulant, Potting Compound; Leveling Filling; Gap Filler, Foam in Place Gasket; Thermally Conductive
from 3M Aerospace and Aircraft Maintenance Division
3M ™ Edge Sealer ES2000 is a two-part edge sealer. It is a clear, non-yellowing and UV stable, durable sealer system having excellent resistance to environmental and ultra-violet (UV) exposure. [See More]
- Type / Form: Grease, Paste
- Substrate Compatibility: Paints, Primers, and Films
- Cure / Technology: Two Component ; Room Temperature Vulcanizing or Curing
- Industry: Aerospace; OEM or Industrial
from Epoxies Etc...
10-3213 is a new two part epoxy adhesive system which exhibits high bond strength and outstanding thermal shock resistance. The 10-3213 has proven to be an excellent quick set patch and repair adhesive with excellent sealant capabilities. [See More]
- Type / Form: Grease, Paste
- Composition: Unfilled
- Chemical System: Epoxy
- Cure / Technology: Thermoset; Two Component ; Room Temperature Vulcanizing or Curing
from Chemence Inc.
KG105 is a single component, thixotropic, low-medium strength, high temperature anaerobic gasket compound. KG105 cures rapidly when confined in the absence of air on close-fitting metal surfaces. KG105 will give an almost instant low-pressure seal (up to 0.5 Bar after 20 mins.) to allow on-line... [See More]
- Type / Form: Grease, Paste
- Substrate Compatibility: Metal
- Cure / Technology: Anaerobic; Two Component (optional feature); Single Component
- Features: Gap Filler, Foam in Place Gasket
from Ebinger Manufacturing Corp.
SILICONE RUBBER TYPE. CLEAR COLOR. INDOOR/OUTDOOR SEALER APPLICATION. TUBE CONTAINER TYPE. 3 FL OZ CONTAINER CAPACITY [See More]
- Type / Form: Grease, Paste
- Features: Caulk, Grout
- Chemical System: Silicone
from DME Company
RTV Silicone Adhesive Sealant. Bonds Most Plastics Many Assembly Uses. Cures at Room Temperature To A Tough Flexible Rubber. Resists Shrinkage. Perfect For Caulking, Sealing, Waterproofing & Bonding. Bonds & Seals Terminals, Connectors, Mounting Fixtures, Mechanical Gaskets, Glass, Metal,... [See More]
- Type / Form: Grease, Paste
- Cure / Technology: Room Temperature Vulcanizing or Curing
- Chemical System: Silicone
- Substrate Compatibility: Plastic; Dissimilar Substrates
from R. S. Hughes Company, Inc.
3M 046013 off-white filler is compatible with fiberglass and wood materials. Provides a 15 min working time. Delivers great performance with a shear strength of 682 psi and tensile strength of 3128 psi. [See More]
- Type / Form: Grease, Paste
- Features: Leveling Filling
from Anti-Seize Technology
AST-SEAL ™HD (Heavy Duty) stainless steel grade is formulated for stainless steel alloy fittings to cure more quickly than standard grade anaerobic. Withstands temperatures from -65 ° to 400 °F (-54 ° to 204 °C) continuous, 500 °F (260 °C) intermittent. UL... [See More]
- Type / Form: Grease, Paste
- Substrate Compatibility: Metal
- Cure / Technology: Anaerobic; Single Component
- Features: Non-corrosive
from Wacker Chemical Corp.
ELASTOSIL ® N199 is a non-slump RTV-1 silicone sealant that cures at room temperature on contact with moisture in the air. Special features. ready-to-use, one-part system. non-slump. translucent. medium hardness. high flexibility. Excellent adhesion. Application. general-purpose adhesive for the... [See More]
- Type / Form: Grease, Paste
- Cure / Technology: Thermoset; Single Component; Reactive or Moisture Cured; Room Temperature Vulcanizing or Curing
- Chemical System: Silicone; Elastomeric
- Features: Flexible
from Acoustical Solutions, Inc.
FireStop Putty Pads provide acoustical protection for wall penetrations in the form of a release lined pad for easy application to electrical boxes or other penetrates. The pad is conveniently sized to fit a typical 1 ½" deep 4S box with no cutting or piercing required. Faced on both sides with a... [See More]
- Type / Form: Grease, Paste
- Substrate Compatibility: Metal; Plastic; Rubber or Elastomer
- Cure / Technology: Single Component
- Features: Flexible; Flame Retardant; Gap Filler, Foam in Place Gasket; UL Rating
from 3M Aerospace and Aircraft Maintenance Division
Two-Part, 30/70 Mix Ratio of Base to Hardener. Designed to cure at room temperature of 70-80F [21-27C]. Cured material exhibits excellent flexibility and adhesion. Low flow, soft paste viscosity permits application on vertical or overhead surfaces with a minimum of run-off. [See More]
- Type / Form: Grease, Paste
- Cure / Technology: Thermoset; Two Component ; Room Temperature Vulcanizing or Curing
- Chemical System: Epoxy
- Features: Flexible
from Epoxies Etc...
20-2182 is a unique high performance two component urethane system. The 20-2182 is engineered for demanding applications where flow control is necessary to limit mold leaking, seeping around cable entries and substrate wicking. This product offers outstanding durability and adhesion to a variety of... [See More]
- Type / Form: Grease, Paste
- Cure / Technology: Two Component ; Room Temperature Vulcanizing or Curing
- Chemical System: Polyurethane
- Features: High Dielectric; Encapsulant, Potting Compound; Thermally Conductive
from Chemence Inc.
KS715 is a fast curing, high strength, silicone RTV adhesive rubber product engineered for applications requiring fast development of physical properties and excellent adhesion. When cured, the elastomer resists weathering, ozone, moisture, UV and high temperatures. KS715 works well in manual and... [See More]
- Type / Form: Grease, Paste
- Cure / Technology: Single Component
- Chemical System: Silicone
- Substrate Compatibility: Ceramic, Glass; Metal; Plastic
from Ebinger Manufacturing Corp.
SILICONIZED ACRYLIC LATEX TYPE. WHITE COLOR. RESISTANT TO MOISTURE, MILDEW, COLD, AIR, DUST APPLICATION. TUBE, PLASTIC CARTRIDGE CONTAINER TYPE. 10.1 OZ CONTAINER CAPACITY [See More]
- Type / Form: Grease, Paste
- Features: Caulk, Grout
- Chemical System: Acrylic; Silicone
from R. S. Hughes Company, Inc.
3M 05815 red filler is compatible with fabric and fiberglass materials. Provides a 3 to 5 min working time. [See More]
- Type / Form: Grease, Paste
- Features: Leveling Filling
from Anti-Seize Technology
AST-SEAL ™HD (Heavy Duty) stainless steel grade is formulated for stainless steel alloy fittings to cure more quickly than standard grade anaerobic. Withstands temperatures from -65 ° to 400 °F (-54 ° to 204 °C) continuous, 500 °F (260 °C) intermittent. UL... [See More]
- Type / Form: Grease, Paste
- Substrate Compatibility: Metal
- Cure / Technology: Anaerobic; Single Component
- Features: Non-corrosive
from Acoustical Solutions, Inc.
SSP Firestop Putty is perfect for metallic conduits, telephone, data or electrical power cable penetrations. A variety of sleeved and non-sleeved applications have been tested and proven providing the ultimate in installation versatility. Non-hardening and reusable, SSP Firestop Putty addresses the... [See More]
- Type / Form: Grease, Paste
- Substrate Compatibility: Metal; Plastic; Rubber or Elastomer
- Cure / Technology: Single Component
- Features: Flexible; Flame Retardant; Gap Filler, Foam in Place Gasket; UL Rating
from 3M Aerospace and Aircraft Maintenance Division
A two part, room temperature curing, low density void filling compound. It is designed for reinforcement of honeycomb sandwich constructions typically found in aircraft interior structures, honeycomb joining and bonding (interior furnishing, ceiling panels), edge panel sealing, inserts bonding,... [See More]
- Type / Form: Grease, Paste
- Cure / Technology: Two Component ; Room Temperature Vulcanizing or Curing
- Chemical System: Epoxy
- Substrate Compatibility: Honeycomb Core
from Epoxies Etc...
UV Cure 60-7158 is a UV Curable Epoxy Adhesive formulated to bond rigid substrates. This adhesive bonds extremely well to aluminum while also providing good water and chemical resistance. UV Cure 60-7158 is a semi-rigid adhesive and it is well suited for bonding rigid substrates. It is thixotropic... [See More]
- Type / Form: Grease, Paste
- Cure / Technology: UV or Radiation Cured; Single Component
- Chemical System: Epoxy
- Substrate Compatibility: Metal
from Ebinger Manufacturing Corp.
SILICONE TYPE. RED COLOR. FIRE PROTECTION APPLICATION. 0 TO 120 DEG F TEMPERATURE RATING. TUBE CONTAINER TYPE. 10.3 FL OZ CONTAINER CAPACITY [See More]
- Type / Form: Grease, Paste
- Features: Caulk, Grout
- Chemical System: Silicone
- Use Temperature: 0 to 120
from R. S. Hughes Company, Inc.
3M 05816 red filler is compatible with fabric and fiberglass materials. Provides a 20 to 30 min working time. [See More]
- Type / Form: Grease, Paste
- Features: Leveling Filling
from Anti-Seize Technology
AST-SEAL ™HD (Heavy Duty) stainless steel grade is formulated for stainless steel alloy fittings to cure more quickly than standard grade anaerobic. Withstands temperatures from -65 ° to 400 °F (-54 ° to 204 °C) continuous, 500 °F (260 °C) intermittent. UL... [See More]
- Type / Form: Grease, Paste
- Substrate Compatibility: Metal
- Cure / Technology: Anaerobic; Single Component
- Features: Non-corrosive
from Acoustical Solutions, Inc.
The Professional's Choice For Spray-Applied Protection of Joints & Penetrations of all types. SpecSeal Sealant has been UL tested and classified for a wide variety of common construction joint applications including floor-to-floor, floor-to-wall, wall-to-floor, wall-to-wall, and head-of-wall... [See More]
- Type / Form: Grease, Paste
- Cure / Technology: Single Component
- Chemical System: Elastomeric
- Substrate Compatibility: Concrete, Masonry; Metal; Paper or Paperboard; Dissimilar Substrates
from 3M Aerospace and Aircraft Maintenance Division
Structural one-part low weight void filler for aircraft interiors. One-part low weight filler combining extreme low density with high extrusion rate for manual and automatic applications. Pumpable. Full stand alone FST properties with patented non-halogen based FST system. Low flow for ease of... [See More]
- Type / Form: Grease, Paste
- Cure / Technology: Single Component
- Chemical System: Epoxy
- Substrate Compatibility: Honeycomb Core
from R. S. Hughes Company, Inc.
3M 1000 NS gray firestop sealant. Has a 3 hr fire rating. Delivers great performance with tensile strength of 85 psi. Maximum operating temperature is +300 F. [See More]
- Type / Form: Grease, Paste
- Use Temperature: 300
- Features: Leveling Filling; UL Rating
from Anti-Seize Technology
AST-SEAL ™HD (Heavy Duty) stainless steel grade is formulated for stainless steel alloy fittings to cure more quickly than standard grade anaerobic. Withstands temperatures from -65 ° to 400 °F (-54 ° to 204 °C) continuous, 500 °F (260 °C) intermittent. UL... [See More]
- Type / Form: Grease, Paste
- Substrate Compatibility: Metal
- Cure / Technology: Anaerobic; Single Component
- Features: Non-corrosive
from R. S. Hughes Company, Inc.
3M 1000 NS gray firestop sealant. Has a 3 hr fire rating. Delivers great performance with tensile strength of 85 psi. Maximum operating temperature is +300 F. [See More]
- Type / Form: Grease, Paste
- Use Temperature: 300
- Features: Leveling Filling; UL Rating
from Anti-Seize Technology
AST-SEAL ™HD (Heavy Duty) stainless steel grade is formulated for stainless steel alloy fittings to cure more quickly than standard grade anaerobic. Withstands temperatures from -65 ° to 400 °F (-54 ° to 204 °C) continuous, 500 °F (260 °C) intermittent. UL... [See More]
- Type / Form: Grease, Paste
- Substrate Compatibility: Metal
- Cure / Technology: Anaerobic; Single Component
- Features: Non-corrosive
from R. S. Hughes Company, Inc.
3M 1000 NS gray firestop sealant. Has a 3 hr fire rating. Delivers great performance with tensile strength of 85 psi. Maximum operating temperature is +300 F. [See More]
- Type / Form: Grease, Paste
- Use Temperature: 300
- Features: Leveling Filling; UL Rating
from Anti-Seize Technology
AST-SEAL ™ Std (Standard Grade) is a general-purpose pipe sealant providing an instant permanent seal that cures in the absence of air to lock threads securely. Withstands temperatures from -65 ° to 300 °F (-54 ° to 149 °C) continuous, 375 °F (191 °C)... [See More]
- Type / Form: Grease, Paste
- Substrate Compatibility: Metal
- Cure / Technology: Anaerobic; Single Component
- Features: Non-corrosive
from R. S. Hughes Company, Inc.
3M 1003 SL gray firestop sealant. Has a 3 hr fire rating. Delivers great performance with tensile strength of 85 psi. Maximum operating temperature is +300 F. [See More]
- Type / Form: Grease, Paste
- Use Temperature: 300
- Features: Leveling Filling; UL Rating
from Anti-Seize Technology
AST-SEAL ™ Std (Standard Grade) is a general-purpose pipe sealant providing an instant permanent seal that cures in the absence of air to lock threads securely. Withstands temperatures from -65 ° to 300 °F (-54 ° to 149 °C) continuous, 375 °F (191 °C)... [See More]
- Type / Form: Grease, Paste
- Substrate Compatibility: Metal
- Cure / Technology: Anaerobic; Single Component
- Features: Non-corrosive
from R. S. Hughes Company, Inc.
3M 1003 SL gray firestop sealant. Has a 3 hr fire rating. Delivers great performance with tensile strength of 85 psi. Maximum operating temperature is +300 F. [See More]
- Type / Form: Grease, Paste
- Use Temperature: 300
- Features: Leveling Filling; UL Rating
from Anti-Seize Technology
AST-SEAL ™ Std (Standard Grade) is a general-purpose pipe sealant providing an instant permanent seal that cures in the absence of air to lock threads securely. Withstands temperatures from -65 ° to 300 °F (-54 ° to 149 °C) continuous, 375 °F (191 °C)... [See More]
- Type / Form: Grease, Paste
- Substrate Compatibility: Metal
- Cure / Technology: Anaerobic; Single Component
- Features: Non-corrosive
from R. S. Hughes Company, Inc.
3M 1003 SL gray firestop sealant. Has a 3 hr fire rating. Delivers great performance with tensile strength of 85 psi. Maximum operating temperature is +300 F. [See More]
- Type / Form: Grease, Paste
- Use Temperature: 300
- Features: Leveling Filling; UL Rating
from Anti-Seize Technology
AST-SEAL ™ Std (Standard Grade) is a general-purpose pipe sealant providing an instant permanent seal that cures in the absence of air to lock threads securely. Withstands temperatures from -65 ° to 300 °F (-54 ° to 149 °C) continuous, 375 °F (191 °C)... [See More]
- Type / Form: Grease, Paste
- Substrate Compatibility: Metal
- Cure / Technology: Anaerobic; Single Component
- Features: Non-corrosive
from R. S. Hughes Company, Inc.
3M 2000+ gray firestop sealant. Has a 4 hr fire rating. Delivers great performance with tensile strength of 350 psi. Maximum operating temperature is +300 F. [See More]
- Type / Form: Grease, Paste
- Use Temperature: 300
- Features: Leveling Filling; UL Rating
from Anti-Seize Technology
AST-SEAL ™ Std (Standard Grade) is a general-purpose pipe sealant providing an instant permanent seal that cures in the absence of air to lock threads securely. Withstands temperatures from -65 ° to 300 °F (-54 ° to 149 °C) continuous, 375 °F (191 °C)... [See More]
- Type / Form: Grease, Paste
- Substrate Compatibility: Metal
- Cure / Technology: Anaerobic; Single Component
- Features: Non-corrosive
from R. S. Hughes Company, Inc.
3M 2000+ gray firestop sealant. Has a 4 hr fire rating. Delivers great performance with tensile strength of 350 psi. Maximum operating temperature is +300 F. [See More]
- Type / Form: Grease, Paste
- Use Temperature: 300
- Features: Leveling Filling; UL Rating
from Anti-Seize Technology
AST-SEAL ™ Std (Standard Grade) is a general-purpose pipe sealant providing an instant permanent seal that cures in the absence of air to lock threads securely. Withstands temperatures from -65 ° to 300 °F (-54 ° to 149 °C) continuous, 375 °F (191 °C)... [See More]
- Type / Form: Grease, Paste
- Substrate Compatibility: Metal
- Cure / Technology: Anaerobic; Single Component
- Features: Non-corrosive
from R. S. Hughes Company, Inc.
3M 3000 WT gray firestop sealant. Has a 4 hr fire rating. Maximum operating temperature is +230 F. [See More]
- Type / Form: Grease, Paste
- Use Temperature: 230
- Features: Leveling Filling; UL Rating
from Anti-Seize Technology
S'MOOTH ™ is a general-purpose metal pipe thread sealant for industrial and residential use. This white paste has a smooth consistency and no grit. Not for oxygen use. Features and Benefits: Fast drying. Non-toxic, non-corrosive. Food Grade compliant, suitable for incidental food contact. Long... [See More]
- Type / Form: Grease, Paste
- Substrate Compatibility: Metal
- Cure / Technology: Single Component
- Features: Non-corrosive
from R. S. Hughes Company, Inc.
3M 3000 WT gray firestop sealant. Has a 4 hr fire rating. Maximum operating temperature is +230 F. [See More]
- Type / Form: Grease, Paste
- Use Temperature: 230
- Features: Leveling Filling; UL Rating
from Anti-Seize Technology
S'MOOTH ™ is a general-purpose metal pipe thread sealant for industrial and residential use. This white paste has a smooth consistency and no grit. Not for oxygen use. Features and Benefits: Fast drying. Non-toxic, non-corrosive. Food Grade compliant, suitable for incidental food contact. Long... [See More]
- Type / Form: Grease, Paste
- Substrate Compatibility: Metal
- Cure / Technology: Single Component
- Features: Non-corrosive
from R. S. Hughes Company, Inc.
3M 3000 WT gray firestop sealant. Has a 4 hr fire rating. Maximum operating temperature is +230 F. [See More]
- Type / Form: Grease, Paste
- Use Temperature: 230
- Features: Leveling Filling; UL Rating
from Anti-Seize Technology
S'MOOTH ™ is a general-purpose metal pipe thread sealant for industrial and residential use. This white paste has a smooth consistency and no grit. Not for oxygen use. Features and Benefits: Fast drying. Non-toxic, non-corrosive. Food Grade compliant, suitable for incidental food contact. Long... [See More]
- Type / Form: Grease, Paste
- Substrate Compatibility: Metal
- Cure / Technology: Single Component
- Features: Non-corrosive
from R. S. Hughes Company, Inc.
3M 4000UV black adhesive/sealant with a 24 hr cure time. Provides a 20 min fixture time. Delivers great performance with tensile strength of 500 psi. [See More]
- Type / Form: Grease, Paste
from Anti-Seize Technology
SLICKON ® GTS GOLD ™ is engineered and tested to be FBC ™ system compatible with FlowGuard Gold ®, Corzan ®, and BlazeMaster ® pipe and fittings. General purpose use, paste consistency, heavy-duty, thread-sealing compound. Contains no solvents or other ingredients... [See More]
- Type / Form: Grease, Paste
- Cure / Technology: Single Component
- Chemical System: Vinyl; Polyethylene
- Substrate Compatibility: Metal
from R. S. Hughes Company, Inc.
3M 4000UV black adhesive/sealant with a 24 hr cure time. Provides a 20 min fixture time. Delivers great performance with tensile strength of 500 psi. [See More]
- Type / Form: Grease, Paste
from Anti-Seize Technology
SLICKON ® GTS GOLD ™ is engineered and tested to be FBC ™ system compatible with FlowGuard Gold ®, Corzan ®, and BlazeMaster ® pipe and fittings. General purpose use, paste consistency, heavy-duty, thread-sealing compound. Contains no solvents or other ingredients... [See More]
- Type / Form: Grease, Paste
- Cure / Technology: Single Component
- Chemical System: Vinyl; Polyethylene
- Substrate Compatibility: Metal
from R. S. Hughes Company, Inc.
3M 4000UV black adhesive/sealant with a 24 hr cure time. Provides a 20 min fixture time. Delivers great performance with tensile strength of 500 psi. [See More]
- Type / Form: Grease, Paste
from Anti-Seize Technology
SLICKON ® GTS GOLD ™ is engineered and tested to be FBC ™ system compatible with FlowGuard Gold ®, Corzan ®, and BlazeMaster ® pipe and fittings. General purpose use, paste consistency, heavy-duty, thread-sealing compound. Contains no solvents or other ingredients... [See More]
- Type / Form: Grease, Paste
- Cure / Technology: Single Component
- Chemical System: Vinyl; Polyethylene
- Substrate Compatibility: Metal
from R. S. Hughes Company, Inc.
3M 4000UV white adhesive/sealant is compatible with fiberglass, metal, nylon and plastic materials with a 24 hr cure time. Provides a 22 min fixture time. Delivers great performance with a shear strength of 584 psi, tensile strength of 500 psi and peel strength of 5.3 psi. Minimum to maximum... [See More]
- Type / Form: Grease, Paste
- Use Temperature: -40 to 190
from Anti-Seize Technology
SLICKON ® GTS GOLD ™ is engineered and tested to be FBC ™ system compatible with FlowGuard Gold ®, Corzan ®, and BlazeMaster ® pipe and fittings. General purpose use, paste consistency, heavy-duty, thread-sealing compound. Contains no solvents or other ingredients... [See More]
- Type / Form: Grease, Paste
- Cure / Technology: Single Component
- Chemical System: Vinyl; Polyethylene
- Substrate Compatibility: Metal
from R. S. Hughes Company, Inc.
3M 4000UV white adhesive/sealant is compatible with fiberglass, metal, nylon and plastic materials with a 24 hr cure time. Provides a 22 min fixture time. Delivers great performance with a shear strength of 584 psi, tensile strength of 500 psi and peel strength of 5.3 psi. Minimum to maximum... [See More]
- Type / Form: Grease, Paste
- Use Temperature: -40 to 190
from Anti-Seize Technology
SLICKON ® GTS GOLD ™ is engineered and tested to be FBC ™ system compatible with FlowGuard Gold ®, Corzan ®, and BlazeMaster ® pipe and fittings. General purpose use, paste consistency, heavy-duty, thread-sealing compound. Contains no solvents or other ingredients... [See More]
- Type / Form: Grease, Paste
- Cure / Technology: Single Component
- Chemical System: Vinyl; Polyethylene
- Substrate Compatibility: Metal
from R. S. Hughes Company, Inc.
3M 4000UV white adhesive/sealant is compatible with fiberglass, metal, nylon and plastic materials with a 24 hr cure time. Provides a 22 min fixture time. Delivers great performance with a shear strength of 584 psi, tensile strength of 500 psi and peel strength of 5.3 psi. Minimum to maximum... [See More]
- Type / Form: Grease, Paste
- Use Temperature: -40 to 190