Flexible / Dampening Industrial Sealants
from Master Bond, Inc.
MasterSil 157 is a two part system for potting, encapsulation and sealing applications. This optically clear formulation features a low index of refraction and excellent light transmittance. Highly flexible, it is capable of withstanding the most rigorous thermal cycling and mechanical shock. These... [See More]
- Features: High Dielectric; Encapsulant, Potting Compound; Flexible; Leveling Filling; Non-corrosive; Phase Change; Gap Filler, Foam in Place Gasket; Thermally Conductive
- Composition: Unfilled
- Chemical System: Silicone
- Cure / Technology: Thermoset; Two Component ; Room Temperature Vulcanizing or Curing; Addition Cure
from Master Bond, Inc.
Master Bond Polymer System EP22 is an aluminum filled, two component epoxy adhesive for high performance bonding, sealing, and coating. It is formulated to cure at room temperature or more rapidly at elevated temperatures, with a non-critical one-to-one mix ratio by weight or volume. The EP22... [See More]
- Features: High Dielectric; Electrically Conductive; EMI/RFI Shielding; Flexible; Gap Filler, Foam in Place Gasket; Anti-static, ESD
- Composition: Filled
- Chemical System: Epoxy
- Cure / Technology: Thermoset; Two Component
from Master Bond, Inc.
EP36FR is a one component, high performance epoxy that meets the Airbus standards from ABD0031, Issue F, June 8, 2005 for flame retardancy. It is used in all kinds of aircraft applications where protection is needed from flames, smoke and materials that might burn. [See More]
- Features: High Dielectric; Encapsulant, Potting Compound; Encapsulant or Conformal Coating; Flexible; Flame Retardant; Leveling Filling; Non-corrosive; Gap Filler, Foam in Place Gasket; Thermally Conductive
- Composition: Unfilled
- Chemical System: Epoxy
- Cure / Technology: Thermoset; Single Component
from Master Bond, Inc.
MasterSil 973S-LO is a two component, silver filled silicone with superb electrical and thermal conductivity. Its exceptionally low volume resistivity allows it to be used for many different applications involving bonding, sealing and coating. It is a paste like system with minimal flow. Its... [See More]
- Features: Electrically Conductive; Encapsulant, Potting Compound; Encapsulant or Conformal Coating; Flexible; Leveling Filling; Non-corrosive; Phase Change; Gap Filler, Foam in Place Gasket; Thermally Conductive
- Composition: Filled
- Chemical System: Silicone
- Cure / Technology: Thermoset; Two Component ; Addition Cure
from Master Bond, Inc.
EP40Med is a two component, room temperature curing epoxy with high elongation that passes ISO 10993-5 for cytotoxicity. It features exceptional adhesion to polycarbonates and acrylics. [See More]
- Features: High Dielectric; Encapsulant, Potting Compound; Encapsulant or Conformal Coating; Flexible; Leveling Filling; Non-corrosive; Gap Filler, Foam in Place Gasket; Thermally Conductive
- Composition: Unfilled
- Chemical System: Epoxy
- Cure / Technology: Thermoset; Two Component ; Room Temperature Vulcanizing or Curing
from Master Bond, Inc.
MasterSil 170 Gel is an addition cured, two component, low viscosity silicone material for specialty potting and encapsulation. [See More]
- Features: High Dielectric; Encapsulant, Potting Compound; Flexible; Leveling Filling; Non-corrosive; Phase Change; Thermally Conductive
- Composition: Unfilled
- Chemical System: Silicone
- Cure / Technology: Thermoset; Two Component ; Room Temperature Vulcanizing or Curing
from Master Bond, Inc.
Master Bond Polymer System EP31 is a two component room temperature curing epoxy for high performance structural bonding applications featuring lap shear strengths exceeding 4500 psi. In addition, unlike many structural epoxies, EP31 also has a high peel strength exceeding 40 pli. The service... [See More]
- Features: High Dielectric; Electrically Conductive; EMI/RFI Shielding; Flexible; Gap Filler, Foam in Place Gasket; Anti-static, ESD
- Cure / Technology: Thermoset; Two Component
- Chemical System: Epoxy
- Type / Form: Grease, Paste
from Master Bond, Inc.
Master Bond Polymer Adhesive EP33 is a unique room temperature curing two component epoxy adhesive for high temperature bonding applications. It is formulated to cure at room temperature or more rapidly at elevated temperatures. Master Bond Polymer Adhesive EP33 produces high strength bonds whose... [See More]
- Features: High Dielectric; Electrically Conductive; EMI/RFI Shielding; Flexible; Gap Filler, Foam in Place Gasket; Anti-static, ESD
- Composition: Unfilled
- Chemical System: Epoxy
- Cure / Technology: Thermoset; Two Component
from Master Bond, Inc.
Master Bond Polymer System EP29LP is a two component high performance epoxy resin system featuring low viscosity, long pot life and low exotherm. As an adhesive this versatile material will form bond strengths in excess of 2,500 psi (aluminum to aluminum). It bonds well to a variety of substrates... [See More]
- Features: High Dielectric; Electrically Conductive; EMI/RFI Shielding; Flexible; Gap Filler, Foam in Place Gasket; Anti-static, ESD
- Composition: Unfilled
- Chemical System: Epoxy
- Cure / Technology: Thermoset; Two Component
from Master Bond, Inc.
Master Bond Polymer System EP29LPSP is a two component, high performance, modified low temperature heat cured epoxy system specially formulated for cryogenic applications. Not only is EP29LPSP able to function as an adhesive, sealant and protective coating at temperatures as low as 4K, but it is... [See More]
- Features: High Dielectric; Electrically Conductive; EMI/RFI Shielding; Encapsulant or Conformal Coating; Flexible; Gap Filler, Foam in Place Gasket; Anti-static, ESD
- Composition: Unfilled
- Chemical System: Epoxy
- Cure / Technology: Thermoset; Two Component
from Master Bond, Inc.
Master Bond Supreme 17HT is a one component toughened epoxy for bonding and sealing. It has a moderate viscosity system with good flow properties. [See More]
- Features: High Dielectric; Encapsulant, Potting Compound; Flexible; Non-corrosive; Thermally Conductive
- Composition: Unfilled
- Chemical System: Epoxy
- Cure / Technology: Thermoset; Single Component
from Master Bond, Inc.
Master Bond Polymer System EP36 is a unique one component high performance toughened epoxy system for electrical potting, casting, encapsulation, baked coatings and adhesive applications. It features an outstanding combination of properties including high temperature stability up to 500 °F,... [See More]
- Features: High Dielectric; Electrically Conductive; EMI/RFI Shielding; Encapsulant, Potting Compound; Flexible; Gap Filler, Foam in Place Gasket; Anti-static, ESD
- Composition: Unfilled
- Chemical System: Epoxy
- Cure / Technology: Thermoset; Single Component
from Wacker Chemical Corp.
ELASTOSIL ® N199 is a non-slump RTV-1 silicone sealant that cures at room temperature on contact with moisture in the air. Special features. ready-to-use, one-part system. non-slump. translucent. medium hardness. high flexibility. Excellent adhesion. Application. general-purpose adhesive for the... [See More]
- Features: Flexible
- Cure / Technology: Thermoset; Single Component; Reactive or Moisture Cured; Room Temperature Vulcanizing or Curing
- Chemical System: Silicone; Elastomeric
- Type / Form: Grease, Paste
from Sauereisen, Inc.
Sauereisen Aluseal Adhesive Cement No. 2 is a ceramic cement paste offering good bond strength and thermal shock. resistant properties for assembling, sealing and cementing porcelain, glass, metal and other materials. Its fine particle size. and excellent flow characteristics make No. 2 a good... [See More]
- Features: High Dielectric; Flexible; Thermally Conductive
- Composition: Unfilled
- Chemical System: Ceramic
- Cure / Technology: Air Setting / Film Drying; Single Component
from Hapco, Inc.
Filter-bond ™ is a series of casting and potting compounds ideally suited for potting, sealing, and bonding filtration and ultrafiltration products. The Filter-bond ™ E-Series is manufactured to ultra-high quality standards and has been used by customers to pass FDA approval. Filter-bond... [See More]
- Features: Encapsulant, Potting Compound; Flexible
- Cure / Technology: Two Component
- Chemical System: Elastomeric; Polyurethane
- Type / Form: Liquid
from 3M Aerospace and Aircraft Maintenance Division
Two-Part, 30/70 Mix Ratio of Base to Hardener. Designed to cure at room temperature of 70-80F [21-27C]. Cured material exhibits excellent flexibility and adhesion. Low flow, soft paste viscosity permits application on vertical or overhead surfaces with a minimum of run-off. [See More]
- Features: Flexible
- Cure / Technology: Thermoset; Two Component ; Room Temperature Vulcanizing or Curing
- Chemical System: Epoxy
- Type / Form: Grease, Paste
from GAF
Description. Matrix ™ 201 Premium SBS Flashing Cement is a premium, asbestos-free formulation for use as a cold-applied bonding agent in SBS modified asphalt roof systems. The high level of modifiers ensures high bonding strength. Heavy, “trowel-grade ” consistency makes this... [See More]
- Features: Flexible; UL Rating
- Substrate Compatibility: Metal; SBS Modified Bitumen
- Cure / Technology: Air Setting / Film Drying; Single Component
- Industry: Construction
from Acoustical Solutions, Inc.
Acoustical Caulk is a non-flammable, latex based sealant specially designed for the reduction of sound transmission and drafts in all types of wall systems. Acoustical Caulk remains flexible and adheres firmly to wood, metal studs, concrete, gypsum board and most other building materials. Acoustical... [See More]
- Features: Caulk, Grout; Flexible; UL Rating; Water Based
- Cure / Technology: Thermoset; Single Component
- Chemical System: Elastomeric
- Type / Form: Grease, Paste
from Novagard Solutions
Single component, moisture cured silicone rubber, strong durable sealant [See More]
- Features: Flexible
- Composition: Unfilled
- Chemical System: Silicone; Elastomeric
- Cure / Technology: Thermoset; Single Component; Reactive or Moisture Cured; Room Temperature Vulcanizing or Curing
from Epoxies Etc...
UV 60-7016 is a high performance Ultraviolet Curable Adhesive, Sealant, and Potting Compound. This new one component urethane acrylate system was specifically designed for the difficult bonding of glass to metal. UV 60-7016 has outstanding thermal shock and impact resistance, and is an excellent... [See More]
- Features: Encapsulant, Potting Compound; Flexible; Gap Filler, Foam in Place Gasket
- Composition: Unfilled
- Chemical System: Elastomeric; Polyurethane
- Cure / Technology: UV or Radiation Cured; Single Component
from GAF
Description. MATRIX ™ 202 SBS Flashing Cement is a high quality, asbestos free formulation for use as a cold-applied bonding agent for SBS modified bitumen roof systems. Heavy, “trowel-grade ” consistency makes this product ideal for flashing details, attachment of membrane to... [See More]
- Features: Flexible; UL Rating
- Substrate Compatibility: Metal; SBS Modified Bitumen
- Cure / Technology: Air Setting / Film Drying; Single Component
- Industry: Construction
from Acoustical Solutions, Inc.
FireStop Putty Pads provide acoustical protection for wall penetrations in the form of a release lined pad for easy application to electrical boxes or other penetrates. The pad is conveniently sized to fit a typical 1 ½" deep 4S box with no cutting or piercing required. Faced on both sides with a... [See More]
- Features: Flexible; Flame Retardant; Gap Filler, Foam in Place Gasket; UL Rating
- Type / Form: Grease, Paste
- Cure / Technology: Single Component
- Substrate Compatibility: Metal; Plastic; Rubber or Elastomer
from Epoxies Etc...
20-2100 FR is a two component, room temperature curing, low viscosity polyurethane system for potting, casting, encapsulating and sealing electronic components and assemblies. 20-2100 FR is a flame retardant self extinguishing system. It meets the stringent requirements of UL 94-VO. Designed for... [See More]
- Features: High Dielectric; Encapsulant, Potting Compound; Flexible; Flame Retardant; Gap Filler, Foam in Place Gasket; UL Rating
- Composition: Unfilled
- Chemical System: Elastomeric; Polyurethane
- Cure / Technology: Thermoset; Two Component ; Room Temperature Vulcanizing or Curing
from GAF
Description. MATRIX ™ 203 Plastic Roof Cement is a general purpose, asbestos free formulation for use as a cold-applied sealant and repair material in all types of roof systems. This product is scientifically compounded with premium materials to enhance resistance to flow and increase... [See More]
- Features: Flexible; UL Rating
- Substrate Compatibility: Concrete, Masonry
- Cure / Technology: Air Setting / Film Drying; Single Component
- Industry: Construction
from Acoustical Solutions, Inc.
SSP Firestop Putty is perfect for metallic conduits, telephone, data or electrical power cable penetrations. A variety of sleeved and non-sleeved applications have been tested and proven providing the ultimate in installation versatility. Non-hardening and reusable, SSP Firestop Putty addresses the... [See More]
- Features: Flexible; Flame Retardant; Gap Filler, Foam in Place Gasket; UL Rating
- Type / Form: Grease, Paste
- Cure / Technology: Single Component
- Substrate Compatibility: Metal; Plastic; Rubber or Elastomer
from GAF
Description. MATRIX ™ 204 Wet/Dry Roof Cement is a general purpose, asbestos free formulation for wet weather repair of roof leaks. This product has unique water displacing characteristics, which ensure superior bonding to both wet and dry substrates and surfaces. Heavy, “trowel-grade... [See More]
- Features: Flexible; UL Rating
- Substrate Compatibility: Concrete, Masonry
- Cure / Technology: Air Setting / Film Drying; Single Component
- Industry: Construction
from Acoustical Solutions, Inc.
The Professional's Choice For Spray-Applied Protection of Joints & Penetrations of all types. SpecSeal Sealant has been UL tested and classified for a wide variety of common construction joint applications including floor-to-floor, floor-to-wall, wall-to-floor, wall-to-wall, and head-of-wall... [See More]
- Features: Caulk, Grout; Flexible; Flame Retardant; Gap Filler, Foam in Place Gasket; UL Rating
- Cure / Technology: Single Component
- Chemical System: Elastomeric
- Type / Form: Grease, Paste
from GAF
Elastomeric Roof Coating. Topcoat ® 322 White Elastomeric Coating is a styrene acrylic-based roof coating that forms a seamless and flexible layer of protection for your roof. This coating is designed to seal and dramatically reduce the surface temperatures and to resist heat absorption and... [See More]
- Features: Flexible; Thermal Insulation
- Cure / Technology: Air Setting / Film Drying; Single Component
- Chemical System: Elastomeric
- Type / Form: Liquid