Metal Industrial Sealants
from Ellsworth Adhesives
3M Polyurethane Sealant 540 Black is a one component, moisture curing sealant that forms permanent elastic bonds to a variety of materials including metals, plastics, fiberglass, and wood. 310 mL Cartridge. [See More]
- Substrate Compatibility: Metal; Plastic; Wood
- Cure / Technology: Single Component
- Chemical System: Polyurethane
- Viscosity: 300000
from Master Bond, Inc.
MasterSil 157 is a two part system for potting, encapsulation and sealing applications. This optically clear formulation features a low index of refraction and excellent light transmittance. Highly flexible, it is capable of withstanding the most rigorous thermal cycling and mechanical shock. These... [See More]
- Substrate Compatibility: Ceramic, Glass; Composites; Metal; Plastic; Porous Surfaces; Rubber or Elastomer; Dissimilar Substrates
- Composition: Unfilled
- Chemical System: Silicone
- Cure / Technology: Thermoset; Two Component ; Room Temperature Vulcanizing or Curing; Addition Cure
from Ellsworth Adhesives
3M Polyurethane Sealant 540 Gray is a one component, moisture curing sealant that forms permanent elastic bonds to a variety of materials including metals, plastics, fiberglass, and wood. 310 mL Cartridge. [See More]
- Substrate Compatibility: Metal; Plastic; Wood
- Cure / Technology: Single Component
- Chemical System: Polyurethane
- Viscosity: 300000
from Master Bond, Inc.
Master Bond Polymer System EP22 is an aluminum filled, two component epoxy adhesive for high performance bonding, sealing, and coating. It is formulated to cure at room temperature or more rapidly at elevated temperatures, with a non-critical one-to-one mix ratio by weight or volume. The EP22... [See More]
- Substrate Compatibility: Ceramic, Glass; Concrete, Masonry; Composites; Metal; Plastic; Porous Surfaces; Rubber or Elastomer; Dissimilar Substrates; Metal/Plastic/Glass/Ceramic/Elast.&Wood
- Composition: Filled
- Chemical System: Epoxy
- Cure / Technology: Thermoset; Two Component
from Ellsworth Adhesives
3M Polyurethane Sealant 540 Gray is a one component, moisture curing sealant that forms permanent elastic bonds to a variety of materials including metals, plastics, fiberglass, and wood. 400 mL Sausage. [See More]
- Substrate Compatibility: Metal; Plastic; Wood
- Cure / Technology: Single Component
- Chemical System: Polyurethane
- Viscosity: 300000
from Master Bond, Inc.
EP36FR is a one component, high performance epoxy that meets the Airbus standards from ABD0031, Issue F, June 8, 2005 for flame retardancy. It is used in all kinds of aircraft applications where protection is needed from flames, smoke and materials that might burn. [See More]
- Substrate Compatibility: Ceramic, Glass; Composites; Metal; Plastic; Porous Surfaces; Rubber or Elastomer; Dissimilar Substrates
- Composition: Unfilled
- Chemical System: Epoxy
- Cure / Technology: Thermoset; Single Component
from Ellsworth Adhesives
3M Polyurethane Sealant 540 Gray is a one component, moisture curing sealant that forms permanent elastic bonds to a variety of materials including metals, plastics, fiberglass, and wood. 600 mL Sausage. [See More]
- Substrate Compatibility: Metal; Plastic; Wood
- Cure / Technology: Single Component
- Chemical System: Polyurethane
- Viscosity: 300000
from Master Bond, Inc.
One part, nano silica filled UV22DC80-10F has the ability to cure in shadowed out areas. It features a UV and heat curing mechanism. Some noteworthy properties include optical clarity, excellent dimensional stability and outstanding physical strength. [See More]
- Substrate Compatibility: Ceramic, Glass; Composites; Metal; Plastic; Porous Surfaces; Dissimilar Substrates
- Cure / Technology: UV or Radiation Cured; Single Component; Dual Curing
- Composition: Filled
- Type / Form: Liquid
from Ellsworth Adhesives
3M Polyurethane Sealant 540 White is a one component, moisture curing sealant that forms permanent elastic bonds to a variety of materials including metals, plastics, fiberglass, and wood. 310 mL Cartridge. [See More]
- Substrate Compatibility: Metal; Plastic; Wood
- Cure / Technology: Single Component
- Chemical System: Polyurethane
- Viscosity: 300000
from Master Bond, Inc.
Master Bond X21 is a specially formulated one component system for bonding and priming polyolefinic surfaces. X21 is a very low viscosity( <250 cps) solvent based system that is easy to apply and process. Most often, it is used as a primer to promote adhesion of polyolefinic substrates to other... [See More]
- Substrate Compatibility: Ceramic, Glass; Composites; Metal
- Composition: Unfilled
- Chemical System: Elastomeric
- Cure / Technology: Thermoset; Single Component
from Ellsworth Adhesives
3M Polyurethane Sealant 540 White is a one component, moisture curing sealant that forms permanent elastic bonds to a variety of materials including metals, plastics, fiberglass, and wood. 400 mL Sausage. [See More]
- Substrate Compatibility: Metal; Plastic; Wood
- Cure / Technology: Single Component
- Chemical System: Polyurethane
- Viscosity: 300000
from Master Bond, Inc.
MasterSil 973S-LO is a two component, silver filled silicone with superb electrical and thermal conductivity. Its exceptionally low volume resistivity allows it to be used for many different applications involving bonding, sealing and coating. It is a paste like system with minimal flow. Its... [See More]
- Substrate Compatibility: Ceramic, Glass; Composites; Metal; Plastic; Porous Surfaces; Rubber or Elastomer; Dissimilar Substrates
- Composition: Filled
- Chemical System: Silicone
- Cure / Technology: Thermoset; Two Component ; Addition Cure
from Ellsworth Adhesives
3M Polyurethane Sealant 540 White is a one component, moisture curing sealant that forms permanent elastic bonds to a variety of materials including metals, plastics, fiberglass, and wood. 600 mL Sausage. [See More]
- Substrate Compatibility: Metal; Plastic; Wood
- Cure / Technology: Single Component
- Chemical System: Polyurethane
- Viscosity: 300000
from Master Bond, Inc.
EP3HTSDA-1 is a one part, highly electrically conductive epoxy designed for die attach applications. It dispenses smoothly and easily, without tailing. Its easy handling and desirable performance properties, such as thermal conductivity, die shear strength and dimensional stability, allow it to be... [See More]
- Substrate Compatibility: Ceramic, Glass; Composites; Metal; Plastic; Porous Surfaces; Dissimilar Substrates
- Composition: Unfilled
- Chemical System: Epoxy
- Cure / Technology: Thermoset; Single Component
from Ellsworth Adhesives
3M Polyurethane Adhesive Sealant 560 Black is a one component, high strength, moisture curing product that forms a permanent elastic bond to a variety of materials including aluminum, steel, coated metal, plastics, and wood. 310 mL Cartridge. [See More]
- Substrate Compatibility: Metal; Plastic; Wood
- Cure / Technology: Single Component
- Chemical System: Polyurethane
- Viscosity: 300000
from Master Bond, Inc.
EP35SP is a two component epoxy system specially formulated to resist high temperatures and aggressive chemicals. It has a paste viscosity with little to no flow when curing. [See More]
- Substrate Compatibility: Ceramic, Glass; Composites; Metal; Plastic; Porous Surfaces; Rubber or Elastomer; Dissimilar Substrates
- Composition: Unfilled
- Chemical System: Epoxy
- Cure / Technology: Thermoset; Two Component
from Ellsworth Adhesives
3M Polyurethane Adhesive Sealant 560 Gray is a one component, high strength, moisture curing product that forms a permanent elastic bond to a variety of materials including aluminum, steel, coated metal, plastics, and wood. 310 mL Cartridge. [See More]
- Substrate Compatibility: Metal; Plastic; Wood
- Cure / Technology: Single Component
- Chemical System: Polyurethane
- Viscosity: 300000
from Master Bond, Inc.
Master Bond EP30LTE-2 is a two part epoxy with an extraordinarily low coefficient of thermal expansion (CTE).It is used for bonding, sealing, coating and encapsulating. [See More]
- Substrate Compatibility: Ceramic, Glass; Composites; Metal; Plastic; Porous Surfaces; Rubber or Elastomer; Dissimilar Substrates
- Composition: Unfilled
- Chemical System: Epoxy
- Cure / Technology: Thermoset; Two Component ; Room Temperature Vulcanizing or Curing
from Ellsworth Adhesives
3M Polyurethane Adhesive Sealant 560 Gray is a one component, high strength, moisture curing product that forms a permanent elastic bond to a variety of materials including aluminum, steel, coated metal, plastics, and wood. 600 mL Sausage. [See More]
- Substrate Compatibility: Metal; Plastic; Wood
- Cure / Technology: Single Component
- Chemical System: Polyurethane
- Viscosity: 300000
from Master Bond, Inc.
EP93FRHT is a two component epoxy that readily passes the Airbus specifications for flame resistance, smoke emission and toxic gas emission as listed under ABD 0031, Issue F. These tests focus on how quickly this adhesive will self extinguish when subjected to a vertical burn test, optical density... [See More]
- Substrate Compatibility: Ceramic, Glass; Composites; Metal; Plastic; Porous Surfaces; Dissimilar Substrates
- Composition: Unfilled
- Chemical System: Epoxy
- Cure / Technology: Thermoset; Two Component ; Room Temperature Vulcanizing or Curing
from Ellsworth Adhesives
3M Hybrid Sealant 730 Clear is a one component, UV resistant, moisture curing sealant that forms permanent elastic bonds. It is paintable when wet and bonds to a variety of materials including metals, plastics, fiberglass, and wood. 305 mL Cartridge. [See More]
- Substrate Compatibility: Metal; Plastic; Wood
- Tensile (Break): 250
- Cure / Technology: Single Component
- Elongation: 300.0
from Master Bond, Inc.
EP40Med is a two component, room temperature curing epoxy with high elongation that passes ISO 10993-5 for cytotoxicity. It features exceptional adhesion to polycarbonates and acrylics. [See More]
- Substrate Compatibility: Ceramic, Glass; Composites; Metal; Plastic; Porous Surfaces; Rubber or Elastomer; Dissimilar Substrates
- Composition: Unfilled
- Chemical System: Epoxy
- Cure / Technology: Thermoset; Two Component ; Room Temperature Vulcanizing or Curing
from Ellsworth Adhesives
3M Hybrid Sealant 760 UV Black is a one component, UV resistant, moisture curing sealant that forms permanent elastic bonds. It is paintable when wet and bonds to a variety of materials including metals, plastics, fiberglass, and wood. 290 mL Cartridge. [See More]
- Substrate Compatibility: Metal; Plastic; Wood
- Tensile (Break): 260
- Cure / Technology: Single Component
- Elongation: 100.0
from Master Bond, Inc.
MasterSil 170 Gel is an addition cured, two component, low viscosity silicone material for specialty potting and encapsulation. [See More]
- Substrate Compatibility: Ceramic, Glass; Composites; Metal; Plastic; Porous Surfaces; Dissimilar Substrates
- Composition: Unfilled
- Chemical System: Silicone
- Cure / Technology: Thermoset; Two Component ; Room Temperature Vulcanizing or Curing
from Ellsworth Adhesives
3M Hybrid Sealant 760 UV White is a one component, UV resistant, moisture curing sealant that forms permanent elastic bonds. It is paintable when wet and bonds to a variety of materials including metals, plastics, fiberglass, and wood. 290 mL Cartridge. [See More]
- Substrate Compatibility: Metal; Plastic; Wood
- Tensile (Break): 260
- Cure / Technology: Single Component
- Elongation: 100.0
from Master Bond, Inc.
Master Bond Polymer Adhesive EP51 is a fast "5 minute" curing two component epoxy adhesive for general purpose bonding formulated to cure at room temperature with a one-to-one mix ratio by weight or volume. It readily develops a high bonding strength of more than 2000 psi at room temperature. The... [See More]
- Substrate Compatibility: Ceramic, Glass; Composites; Metal; Plastic; Porous Surfaces; Rubber or Elastomer; Metal/Plastic/Glass/Ceramic/Elast.&Wood
- Composition: Unfilled
- Chemical System: Epoxy
- Cure / Technology: Thermoset; Two Component
from Ellsworth Adhesives
3M P591 All Purpose Sealant Primer Black is a one part, low viscosity, adhesion promoter. It is designed to improve adhesion to hybrid, and polyurethane adhesive sealants. Ideal for polycarbonate, polyester, and acrylic bonding applications. Black 250 mL Bottle. [See More]
- Substrate Compatibility: Metal; Plastic; Wood
- Viscosity: 10
from Master Bond, Inc.
Master Bond Polymer System EP39-2 is a fast curing, low viscosity, optically clear two component epoxy system for high performance bonding, sealing, coating and casting. It is 100% reactive and does not contain any diluents, solvents or other volatiles. The mix ratio is a convenient 2 to 1 by... [See More]
- Substrate Compatibility: Ceramic, Glass; Composites; Metal; Plastic; Porous Surfaces
- Composition: Unfilled
- Chemical System: Epoxy
- Cure / Technology: Thermoset; Two Component
from Ellsworth Adhesives
3M Scotch-Seal Metal Sealant 2084 Aluminum is a one component, air drying sealant that is used for bonding and sealing wood, metal, and plastics. It offers flexibility, meets AAMA Specification 801.1, and is resistant to oils, water, and fuel. 5 oz Tube. [See More]
- Substrate Compatibility: Metal; Wood
- Viscosity: 7000 to 22500
- Cure / Technology: Single Component
- Gap Fill: 0.0625
from Master Bond, Inc.
Master Bond EP62-1 is a two component heat cured and chemically resistant epoxy resin system featuring a long pot life at ambient temperatures and efficient cures at moderately elevated temperatures. The recommended mix ratio is 100 parts of component A to 10 parts of component B. The pot life of... [See More]
- Substrate Compatibility: Ceramic, Glass; Composites; Metal; Porous Surfaces
- Type / Form: Liquid
- Cure / Technology: Thermoset; Two Component
- Features: Encapsulant, Potting Compound; Encapsulant or Conformal Coating; Gap Filler, Foam in Place Gasket
from Ellsworth Adhesives
3M Scotch-Seal Industrial Sealant 800 Red Brown is an air drying, nitrile based adhesive that is used for bonding metal surfaces. It offers a wide temperature range, flexibility, can be applied by brushing methods, and is resistant to oils, water, and fuel. 5 oz Tube. [See More]
- Substrate Compatibility: Metal; Plastic; Wood
- Viscosity: 25000 to 45000
- Cure / Technology: Single Component
- Tensile (Break): 180
from Master Bond, Inc.
Master Bond X-5 is specially formulated, synthetic elastomer-based, one component adhesive for high performance bonding and sealing. This synthetic elastomer based adhesive bonds well in both shear and peel to similar and dissimilar surfaces including metals, woods, most plastics, ceramics, glass,... [See More]
- Substrate Compatibility: Ceramic, Glass; Composites; Metal
- Composition: Unfilled
- Chemical System: Elastomeric
- Cure / Technology: Thermoset; Single Component
from Henkel Corporation - Industrial
LOCTITE ABLESTIK G 500HF, Epoxy, Assembly LOCTITE ® ABLESTIK G 500HF is a general purpose epoxy adhesive and sealant that cures to a high gloss finish. One component. Sag resistant. Process ease. Non-abrasive. No flow during cure even on vertical surface. High adhesion strength at elevated... [See More]
- Substrate Compatibility: Metal
- Cure / Technology: Single Component
- Chemical System: Epoxy
- Use Temperature: 40 to 356
from Epoxies Etc...
UV 60-7016 is a high performance Ultraviolet Curable Adhesive, Sealant, and Potting Compound. This new one component urethane acrylate system was specifically designed for the difficult bonding of glass to metal. UV 60-7016 has outstanding thermal shock and impact resistance, and is an excellent... [See More]
- Substrate Compatibility: Ceramic, Glass; Metal; Dissimilar Substrates
- Composition: Unfilled
- Chemical System: Elastomeric; Polyurethane
- Cure / Technology: UV or Radiation Cured; Single Component
from ThreeBond International, Inc.
Room-Temperature-Vulcanizing Silicone, or Silicone RTV's are used for sealing inner fluids via application to the joint surfaces of various flanges, screws, etc. ThreeBond silicones form a rubber elastic bond that have excellent vibration absorption, as well as chemical, shock and heat resistance. [See More]
- Substrate Compatibility: Metal; Plastic; Rubber or Elastomer
- Cure / Technology: Single Component; Reactive or Moisture Cured; Room Temperature Vulcanizing or Curing
- Chemical System: Silicone
- Industry: Automotive
from Hi-Tech Seals, Inc.
Assembly of cylindrical parts, such as rotors, gears, bushings, collars and bearings, can be effectively and reliably accomplished with HERNON ® ’s line of Cylinlock ® Retaining Compounds. Cylinlock ® high strength products eliminate the need for mechanical methods of assembly... [See More]
- Substrate Compatibility: Metal; Plastic
- Cure / Technology: Single Component
- Chemical System: Acrylic
- Type / Form: Liquid
from Sherwin-Williams Protective & Marine Coatings
ENVIROLASTIC AR530 BRUSH GRADE is a 100% solids, fluid applied polyurea elastomer repair material that is based on proprietary polyurea formulation and a modified amine curing mechanism. It can be applied at thicknesses of 30 - 250 mils in consecutive multiple applications. Fast cure short downtime. [See More]
- Substrate Compatibility: Concrete, Masonry; Metal
- Composition: Unfilled
- Chemical System: Polyurethane
- Cure / Technology: Thermoset; Two Component
from Hapco, Inc.
Filter-bond ™ is a series of casting and potting compounds ideally suited for potting, sealing, and bonding filtration and ultrafiltration products. The Filter-bond R-Series is manufactured to ultra-high quality standards and has been used by customers to pass FDA approval. Filter-bond ™... [See More]
- Substrate Compatibility: Ceramic, Glass; Metal; Plastic; Textiles or Fabrics; Wood
- Cure / Technology: Two Component
- Chemical System: Polyurethane
- Type / Form: Liquid
from 3M Aerospace and Aircraft Maintenance Division
Fast-Drying, Fire Retardant. Apply Over Movable Part. Tampering with Part can be Detected by Break in Sealant. [See More]
- Substrate Compatibility: Metal
- Cure / Technology: Air Setting / Film Drying; Single Component
- Chemical System: Phenolic
- Type / Form: Liquid
from Protavic America, Inc.
PNE-47207 ™ is an adhesive/sealant and potting compound. PNE-47207 ™ is designed to provide air free potting and casting of electronic devices. PNE-47207 ™ will bond difficult substrates such as glass, ceramics, and metals. It passes UL 94V0 for fire retardant properties,and has a... [See More]
- Substrate Compatibility: Ceramic, Glass; Metal
- Composition: Filled
- Chemical System: Epoxy
- Cure / Technology: Thermoset; Two Component
from Chemence Inc.
Krylex KT722 is a high strength, high viscosity, high service temperature, anaerobic thread locker. KT722 cures when confined in the absence of air between close-fitting metal surfaces. KT722 is formulated to lock all metric and imperial nuts and bolts, preventing vibration loosening and leakage... [See More]
- Substrate Compatibility: Metal
- Type / Form: Liquid
- Cure / Technology: Anaerobic; Two Component (optional feature); Single Component
- Features: Gap Filler, Foam in Place Gasket; Threadlocker or Retainer
from Wacker Chemical Corp.
ELASTOSIL ® RT 745 A/B is a pourable, thermally curable, addition-curing, two-part silicone rubber. Special features. two-part, 1 : 1 mixing ratio. low viscosity. low hardness. low risk of inhibition. rapid heat cure. primerless adhesion. Application. encapsulation of electronic components. [See More]
- Substrate Compatibility: Ceramic, Glass; Metal; Dissimilar Substrates
- Cure / Technology: Thermoset; Two Component ; Room Temperature Vulcanizing or Curing; Condensation Cured
- Chemical System: Silicone; Elastomeric
- Type / Form: Grease, Paste
from Aremco Products, Inc.
Used for repairing metal components, pinholes, cracks, and filling seams. [See More]
- Substrate Compatibility: Metal
- Composition: Filled
- Chemical System: Ceramic
- Cure / Technology: Air Setting / Film Drying; Thermoset
from Sauereisen, Inc.
Sauereisen Aluseal Adhesive Cement No. 2 is a ceramic cement paste offering good bond strength and thermal shock. resistant properties for assembling, sealing and cementing porcelain, glass, metal and other materials. Its fine particle size. and excellent flow characteristics make No. 2 a good... [See More]
- Substrate Compatibility: Ceramic, Glass; Metal
- Composition: Unfilled
- Chemical System: Ceramic
- Cure / Technology: Air Setting / Film Drying; Single Component
from Anti-Seize Technology
AST-PPD ™ is a smooth, grit-free, gray-colored pipe joint compound. It seals threaded joints and will not crack or crumble. Made for easy disassembly. Contains no lead and is safe for all water systems. Not for oxygen use. Features and Benefits: Sets soft non-hardening. Contains non-toxic,... [See More]
- Substrate Compatibility: Metal
- Cure / Technology: Single Component
- Chemical System: Silicone
- Industry: Construction
from Phelps Industrial Products
Phelps Style 9750 is a Contact Cement that provides a long bonding range and excellent initial strength. Ideal for plastic laminates, paper honeycomb, rubber, cloth, metal and wood. Meets requirements of Mil-A-1154C, Mil-A-21366 and MMM-A-121. Ensure both surfaces are clean and dry. Apply coating to... [See More]
- Substrate Compatibility: Metal; Plastic; Rubber or Elastomer; Textiles or Fabrics; Wood; Dissimilar Substrates; Paper
- Type / Form: Liquid
- Cure / Technology: Air Setting / Film Drying
- Features: Solvent Based
from Henkel Corporation - Electronics
Loctite ® 5089 ™ Nuva-Sil ® Silicone Gasket / Sealant is used for gasketing and sealing applications. Upon exposure to sufficient UV light and/or atmospheric moisture, this product cures to form a durable, flexible rubber sealant. Typical applications include gasketing/sealing of... [See More]
- Substrate Compatibility: Ceramic, Glass; Metal; Plastic
- Cure / Technology: Single Component
- Chemical System: Epoxy
- Industry: Electronics
from Acoustical Solutions, Inc.
Acoustical Caulk is a non-flammable, latex based sealant specially designed for the reduction of sound transmission and drafts in all types of wall systems. Acoustical Caulk remains flexible and adheres firmly to wood, metal studs, concrete, gypsum board and most other building materials. Acoustical... [See More]
- Substrate Compatibility: Concrete, Masonry; Metal; Paper or Paperboard; Wood; Dissimilar Substrates; Gypsum Board
- Cure / Technology: Thermoset; Single Component
- Chemical System: Elastomeric
- Type / Form: Grease, Paste
from Epoxy Technology
Thermally Conductive Adhesives (TCAs) are electrically insulating materials that conduct heat as an adhesive or encapsulant. These products are typically oven cured or set at room temperature and are available in a range of viscosities. Our TCAs are well known for resisting hostile environments,... [See More]
- Substrate Compatibility: Ceramic, Glass; Metal; Plastic
- Cure / Technology: Thermoset; Two Component
- Chemical System: Epoxy
- Type / Form: Grease, Paste
from Bluestar Silicones USA Corp.
Two-Component, Flowable Silicone Aerospace Sealant. Properties. Viscosity 190000. Hardness Sha 58. Description. Bluesil V-695 is a black, two component addition cure, flowable silicone aerospace sealant. It is specifically designed for, and qualified to, General Electric Aircraft Engine... [See More]
- Substrate Compatibility: Metal; Plastic
- Cure / Technology: Two Component
- Chemical System: Silicone
- Industry: Aerospace
from Techsil Limited
Devcon Aluminum Putty (F) is an aluminum filled epoxy putty for cost effective repairs to aluminum castings, components & equipment. It bonds to most metals & rigid plastics and is resistant to CFC's & chemicals. This putty is used on applications requiring an aluminum, non- rusting... [See More]
- Substrate Compatibility: Metal
- Features: Gap Filler, Foam in Place Gasket
- Chemical System: Epoxy
from ND Industries, Inc.
Anaerobic Gasket Makers alleviate the need for preformed gaskets. Remaining liquid when exposed to air, they cure when confined between mating flanges. Typically used on thermostats, pumps, gearboxes, compressors, transmission housings, axle covers and more [See More]
- Substrate Compatibility: Metal
- Cure / Technology: Anaerobic; Single Component
- Chemical System: Silicone
- Type / Form: Liquid
from Reid Supply
Sealants are used to repair, patch or fix imperfections and small gaps in a variety of applications. . 16 oz Gorilla Waterproof Patch and Seal Spray - Black. [See More]
- Substrate Compatibility: Ceramic, Glass; Concrete, Masonry; Metal; Rubber or Elastomer; Textiles or Fabrics; Wood; Metal, Concrete, Wood, Aluminum, Brick, Tile, Fabric, Rubber, Glass
- Features: Gap Filler, Foam in Place Gasket
from M&I Materials Limited
Apiezon Sealing Compound Q is a versatile, temporary vacuum sealing medium. It is a soft, putty like substance which is easily moulded by hand at ambient temperatures, yet firm enough to remain in position and is readily removed when no longer required. [See More]
- Substrate Compatibility: Ceramic, Glass; Metal; Plastic
- Use Temperature: 14 to 86
from Nylok Corporation
Precote ® 5 is a nonreactive coating used for immediate sealing of cylindrical and conical threads. The coating is dry, tack-free, with good adherence and can be used in all kinds of assembly procedures. Advantages. Complies with or exceeds major OEM specifications. Parts are ready for assembly. [See More]
- Substrate Compatibility: Metal
- Use Temperature: -76 to 356
- Industry: Automotive
from GAF
Description. Matrix ™ 201 Premium SBS Flashing Cement is a premium, asbestos-free formulation for use as a cold-applied bonding agent in SBS modified asphalt roof systems. The high level of modifiers ensures high bonding strength. Heavy, “trowel-grade ” consistency makes this... [See More]
- Substrate Compatibility: Metal; SBS Modified Bitumen
- Features: Flexible; UL Rating
- Cure / Technology: Air Setting / Film Drying; Single Component
- Industry: Construction
from Henkel Corporation - Industrial
Medium-strength, general purpose gasketing product - excellent contamination tolerance. Ideal for use on casted iron, steel and aluminum flanges. LOCTITE ® 518 cures when confined in the absence of air between close-fitting metal surfaces. It is an anaerobic gasketing material designed for use... [See More]
- Substrate Compatibility: Metal
- Gap Fill: 0.0120
- Cure / Technology: Anaerobic
- Use Temperature: 65 to 300
from Epoxies Etc...
10-3508 is a steel filled repair and filling epoxy compound. This non-sag formulation will not drip on vertical surfaces and provides outstanding adhesion to metals, wood, concrete, glass and plastics. [See More]
- Substrate Compatibility: Ceramic, Glass; Concrete, Masonry; Metal; Plastic; Wood
- Composition: Filled
- Chemical System: Epoxy
- Cure / Technology: Thermoset; Two Component ; Room Temperature Vulcanizing or Curing
from Hi-Tech Seals, Inc.
HERNON ® ’s line of Dripstop ® sealants for plumbing, refrigeration and hydraulics are engineered with many advantages over conventional pipe dopes. These materials harden without shrinkage in the joints creating a tough, insoluble, vibration proof seal that will not leak even if... [See More]
- Substrate Compatibility: Metal
- Cure / Technology: Anaerobic; Single Component
- Chemical System: Acrylic
- Type / Form: Grease, Paste
from Sherwin-Williams Protective & Marine Coatings
Macropoxy 5000, Low VOC Penetrating Epoxy Primer/Sealer. Recommended Usage. Petrochem exploration and offshore platforms. Over white rusted and zinc rich coatings. Chalky surfaces in atmospheric conditions. Tanks, piping, structural steel and vessels. Industrial applications. Marine applications. [See More]
- Substrate Compatibility: Concrete, Masonry; Metal; Aged Coatings
- Cure / Technology: Air Setting / Film Drying; Two Component
- Chemical System: Epoxy
- Industry: Marine; OEM or Industrial
from 3M Aerospace and Aircraft Maintenance Division
3M ™ Scotch-Weld ™ Structural Adhesive EC-3587 B/A Gray is a two-part polyurethane that cures at room temperature or with heat to a tough, impact-resistant material. It has excellent adhesion to many metal and plastic substrates. It can be used as structural adhesive, void filler, or as... [See More]
- Substrate Compatibility: Metal; Plastic
- Cure / Technology: Thermoset; Two Component ; Room Temperature Vulcanizing or Curing
- Chemical System: Polyurethane
- Type / Form: Grease, Paste
from Chemence Inc.
KG105 is a single component, thixotropic, low-medium strength, high temperature anaerobic gasket compound. KG105 cures rapidly when confined in the absence of air on close-fitting metal surfaces. KG105 will give an almost instant low-pressure seal (up to 0.5 Bar after 20 mins.) to allow on-line... [See More]
- Substrate Compatibility: Metal
- Type / Form: Grease, Paste
- Cure / Technology: Anaerobic; Two Component (optional feature); Single Component
- Features: Gap Filler, Foam in Place Gasket
from Sauereisen, Inc.
Sauereisen Cement No. 31 is a white, porcelain-like cement that is widely used throughout industry in a variety of applications. including assembling, sealing, insulating and cementing of ceramics, porcelain, metal, and glass. [See More]
- Substrate Compatibility: Ceramic, Glass; Metal; Porous Surfaces
- Composition: Unfilled
- Chemical System: Ceramic
- Cure / Technology: Two Component ; Chemically Set
from Anti-Seize Technology
AST-PPD ™ is a smooth, grit-free, gray-colored pipe joint compound. It seals threaded joints and will not crack or crumble. Made for easy disassembly. Contains no lead and is safe for all water systems. Not for oxygen use. Features and Benefits: Sets soft non-hardening. Contains non-toxic,... [See More]
- Substrate Compatibility: Metal
- Cure / Technology: Single Component
- Chemical System: Silicone
- Industry: Construction
from Phelps Industrial Products
Phelps Style 9815 is 100% RTV (room temperature vulcanizing) silicone that can be used anywhere a high temperature sealant/adhesive is required. This high temp silicone sealant builds a formed-in-place gasket at operating temperatures up to 310 °C. Phelps Style 9815 high temperature silicone... [See More]
- Substrate Compatibility: Ceramic, Glass; Metal
- Composition: Unfilled
- Chemical System: Silicone
- Cure / Technology: Room Temperature Vulcanizing or Curing
from Acoustical Solutions, Inc.
FireStop Putty Pads provide acoustical protection for wall penetrations in the form of a release lined pad for easy application to electrical boxes or other penetrates. The pad is conveniently sized to fit a typical 1 ½" deep 4S box with no cutting or piercing required. Faced on both sides with a... [See More]
- Substrate Compatibility: Metal; Plastic; Rubber or Elastomer
- Type / Form: Grease, Paste
- Cure / Technology: Single Component
- Features: Flexible; Flame Retardant; Gap Filler, Foam in Place Gasket; UL Rating
from Techsil Limited
Devcon Plastic Steel Putty A is the original metal filled epoxy putty for economical, dependable maintenance and repair work. In a 1 KG size, this product is also known as Devcon 10115. Devcon plastic steel putty is recommended for repairing cracks and breaks in equipment, machinery or castings,... [See More]
- Substrate Compatibility: Metal
- Features: Gap Filler, Foam in Place Gasket
- Chemical System: Epoxy
from ND Industries, Inc.
Vibra-Tite anaerobic retaining compounds are designed to increase shear strength on non-threaded cylindrical metal assemblies. The liquid anaerobic material fills the voids between close-fitting metal parts and cures to a toughened thermoset-plastic which creates a solid one piece assembly. [See More]
- Substrate Compatibility: Metal
- Type / Form: Liquid
- Cure / Technology: Anaerobic; Single Component
- Features: Gap Filler, Foam in Place Gasket; Threadlocker or Retainer
from Nylok Corporation
Nyplas ® sealant is a plastisol material, pre-applied coating under the heads of a variety of fasteners to provide sealing against water, moisture, dust, air and noise dampening. Advantages. Seals/dampens immediately upon assembly. No secondary material required. Eliminates the need for O-rings,... [See More]
- Substrate Compatibility: Metal
- Use Temperature: -40 to 150
- Industry: Automotive
from GAF
Description. MATRIX ™ 202 SBS Flashing Cement is a high quality, asbestos free formulation for use as a cold-applied bonding agent for SBS modified bitumen roof systems. Heavy, “trowel-grade ” consistency makes this product ideal for flashing details, attachment of membrane to... [See More]
- Substrate Compatibility: Metal; SBS Modified Bitumen
- Features: Flexible; UL Rating
- Cure / Technology: Air Setting / Film Drying; Single Component
- Industry: Construction
from Henkel Corporation - Industrial
Gasketing Product - excellent oil and chemical resistance. General purpose. Highly flexible. LOCTITE ® 5188 is a highly flexible sealant which cures when confined in the absence of air between close-fitting metal surfaces. It is designed for use on rigid metal flanged connections, particularly... [See More]
- Substrate Compatibility: Metal
- Use Temperature: 65 to 300
- Gap Fill: 0.0100
from Hi-Tech Seals, Inc.
Classic cyanoacrylates are represented by the ethyl and methyl chemistries. Generally, the methyls offer better bond strengths on metals, the ethyls providing better strengths on everything else. Substrate selection and bond line configuration directly influence adhesive performance. [See More]
- Substrate Compatibility: Ceramic, Glass; Metal; Paper or Paperboard; Plastic; Rubber or Elastomer; Textiles or Fabrics
- Cure / Technology: Single Component; Room Temperature Vulcanizing or Curing
- Chemical System: Cyanoacrylate
- Type / Form: Liquid
from Chemence Inc.
KS715 is a fast curing, high strength, silicone RTV adhesive rubber product engineered for applications requiring fast development of physical properties and excellent adhesion. When cured, the elastomer resists weathering, ozone, moisture, UV and high temperatures. KS715 works well in manual and... [See More]
- Substrate Compatibility: Ceramic, Glass; Metal; Plastic
- Cure / Technology: Single Component
- Chemical System: Silicone
- Type / Form: Grease, Paste
from Anti-Seize Technology
AST-PPD ™ is a smooth, grit-free, gray-colored pipe joint compound. It seals threaded joints and will not crack or crumble. Made for easy disassembly. Contains no lead and is safe for all water systems. Not for oxygen use. Features and Benefits: Sets soft non-hardening. Contains non-toxic,... [See More]
- Substrate Compatibility: Metal
- Cure / Technology: Single Component
- Chemical System: Silicone
- Industry: Construction
from Acoustical Solutions, Inc.
SSP Firestop Putty is perfect for metallic conduits, telephone, data or electrical power cable penetrations. A variety of sleeved and non-sleeved applications have been tested and proven providing the ultimate in installation versatility. Non-hardening and reusable, SSP Firestop Putty addresses the... [See More]
- Substrate Compatibility: Metal; Plastic; Rubber or Elastomer
- Type / Form: Grease, Paste
- Cure / Technology: Single Component
- Features: Flexible; Flame Retardant; Gap Filler, Foam in Place Gasket; UL Rating
from Techsil Limited
Devcon Stainless Steel Putty is a steel-filled epoxy designed for rebuilding and repairing stainless steel equipment. It will repair cracks, dents and breaks in stainless steel machinery or castings. Intended uses include repairs to diary equipment and repairs to stainless steel holding tanks. [See More]
- Substrate Compatibility: Metal
- Features: Gap Filler, Foam in Place Gasket
- Chemical System: Epoxy
from ND Industries, Inc.
Vibra-Tite anaerobic thread sealants secure metal pipes and fittings by filling the space between threaded metal parts. Thread sealants prevent leakage caused by tape shredding, vibration loosening, solvent evaporation, and damaged threads. Vibra-Tite products are designed for both low and high... [See More]
- Substrate Compatibility: Metal
- Type / Form: Liquid
- Cure / Technology: Anaerobic; Single Component
- Features: Gap Filler, Foam in Place Gasket; Threadlocker or Retainer
from Nylok Corporation
Nyseal ® is a great gasket alternative, creating a gasket-type seal, preventing leakage of fluids and gases under pressure. The coating is permanently fused on the bearing surface of the fastener. As the screw is seated to its final position against the mating part, the Nyseal ® element... [See More]
- Substrate Compatibility: Metal
- Use Temperature: -40 to 150
- Industry: Automotive
from Henkel Corporation - Industrial
1-part, low modulus, flexible, odorless modified silane polymer adhesive used for elastic sealing. It cures to an elastomeric thermoset product. TEROSON ® MS 939NA is a black, white or gray, 1-part, low modulus, flexible, odorless modified silane polymer adhesive used for elastic sealing. It... [See More]
- Substrate Compatibility: Ceramic, Glass; Metal; Plastic
from Hi-Tech Seals, Inc.
The Nuts N ’ Bolts is an anaerobic adhesive, used in nut and bolt assemblies. When the adhesive is confined between substrates, the oxygen is eliminated and the adhesive cures. These thread locking adhesives offer a wide-range of strengths, viscosities, and temperature ranges for just about... [See More]
- Substrate Compatibility: Metal
- Cure / Technology: Anaerobic; Single Component
- Chemical System: Acrylic
- Type / Form: Liquid
from Anti-Seize Technology
AST-PPD ™ is a smooth, grit-free, gray-colored pipe joint compound. It seals threaded joints and will not crack or crumble. Made for easy disassembly. Contains no lead and is safe for all water systems. Not for oxygen use. Features and Benefits: Sets soft non-hardening. Contains non-toxic,... [See More]
- Substrate Compatibility: Metal
- Cure / Technology: Single Component
- Chemical System: Silicone
- Industry: Construction
from Acoustical Solutions, Inc.
The Professional's Choice For Spray-Applied Protection of Joints & Penetrations of all types. SpecSeal Sealant has been UL tested and classified for a wide variety of common construction joint applications including floor-to-floor, floor-to-wall, wall-to-floor, wall-to-wall, and head-of-wall... [See More]
- Substrate Compatibility: Concrete, Masonry; Metal; Paper or Paperboard; Dissimilar Substrates
- Cure / Technology: Single Component
- Chemical System: Elastomeric
- Type / Form: Grease, Paste
from Techsil Limited
Devcon Wear Resistant Putty is a smooth, non-rusting ceramic-filled epoxy putty used to repair and rebuild interfacing metallic, low-friction surfaces such as machine ways and flanges. This product will repair in tight spots where a fine flowing putty is required, it will easily bond to steel, iron,... [See More]
- Substrate Compatibility: Ceramic, Glass; Concrete, Masonry; Metal; Plastic
- Cure / Technology: Thermoset
- Chemical System: Epoxy
- Features: Gap Filler, Foam in Place Gasket
from Nylok Corporation
Precote ® 200 is a highly resilient under-the-head sealant with good adhesion to seal the mating surfaces of screws, plugs, and rivets. The coating is completely dry and non-tacky. The sealing performance is obtained immediately after assembly. Advantages. Dry and tack free coating. Can be... [See More]
- Substrate Compatibility: Metal
- Use Temperature: -40 to 212
- Industry: Automotive
from Henkel Corporation - Industrial
Gasketing Product- high temperature and chemical resistance. Ideal for use on rigid flanges. LOCTITE ® 510 is a high temperature resistant anaerobic sealant which cures when confined in the absence of air between close-fitting metal surfaces. Typical applications include sealing rigid flange... [See More]
- Substrate Compatibility: Metal
- Gap Fill: 0.0100
- Cure / Technology: Anaerobic
- Use Temperature: 65 to 400
from Hi-Tech Seals, Inc.
The Quantum ® group of HERNON ® cyanoacrylates offers specialized performance attributes. This range of grades has been engineered to provide solutions to specific cyanoacrylate challenges. Three categories are offered: surface insensitive, toughened, and low odor-low blooming. [See More]
- Substrate Compatibility: Ceramic, Glass; Metal; Paper or Paperboard; Plastic; Textiles or Fabrics
- Cure / Technology: Single Component; Room Temperature Vulcanizing or Curing
- Chemical System: Cyanoacrylate
- Type / Form: Liquid
from Anti-Seize Technology
AST-PPD ™ is a smooth, grit-free, gray-colored pipe joint compound. It seals threaded joints and will not crack or crumble. Made for easy disassembly. Contains no lead and is safe for all water systems. Not for oxygen use. Features and Benefits: Sets soft non-hardening. Contains non-toxic,... [See More]
- Substrate Compatibility: Metal
- Cure / Technology: Single Component
- Chemical System: Silicone
- Industry: Construction
from Nylok Corporation
3M ™ Thread Sealant 4291 is a water-based product designed to be pre-applied to threaded fasteners. It has excellent resistance to automotive fluids and can withstand high temperatures and pressures. Typical applications are threaded fasteners for the engine compartment. Advantages. [See More]
- Substrate Compatibility: Metal
- Industry: Automotive
from Henkel Corporation - Industrial
Gasketing Product - general purpose. Ideal for use on machined and rigid metal flanges LOCTITE ® 574 seals close-fitting joints between rigid metal faces and flanges. The product cures when confined in the absence of air between close-fitting metal surfaces. It provides resistance to low... [See More]
- Substrate Compatibility: Metal
- Gap Fill: 0.0100
from Hi-Tech Seals, Inc.
HERNON ® offers a complete line of structural acrylic adhesives. These systems are two-part, no mix, and reactive adhesives. Each acrylic adhesive has two components: the adhesive base or resin, and the Activator. Structural acrylic adhesives are termed “reactive ” cure systems. The... [See More]
- Substrate Compatibility: Metal; Plastic
- Cure / Technology: Two Component ; Reactive or Moisture Cured
- Chemical System: Acrylic
- Type / Form: Liquid
from Anti-Seize Technology
AST-PPD ™ is a smooth, grit-free, gray-colored pipe joint compound. It seals threaded joints and will not crack or crumble. Made for easy disassembly. Contains no lead and is safe for all water systems. Not for oxygen use. Features and Benefits: Sets soft non-hardening. Contains non-toxic,... [See More]
- Substrate Compatibility: Metal
- Cure / Technology: Single Component
- Chemical System: Silicone
- Industry: Construction
from Henkel Corporation - Industrial
Viscous, neoprene rubber solvent-based liquid contact cement used for all types of weather-stripping and general purpose bonding LOCTITE ® MR 5414 is a black, viscous, neoprene rubber solvent-based liquid contact cement used for all types of weather-stripping and general purpose bonding. Typical... [See More]
- Substrate Compatibility: Metal; Porous Surfaces; Rubber or Elastomer; Textiles or Fabrics; Wood
- Type / Form: Liquid
from Hi-Tech Seals, Inc.
HERNON ® Self Sealer products are tough, pre-applied, non-hardening thread sealants. They provide instant seal on different pipe threads and can be used up to eight (8) times without re-coating. Self-Sealer products are water based, non-toxic, and safe and can be applied easily without special... [See More]
- Substrate Compatibility: Metal; Plastic
- Type / Form: Liquid
- Chemical System: Acrylic
- Features: Threadlocker or Retainer; Water Based
from Anti-Seize Technology
AST-SEAL ™HD (Heavy Duty) stainless steel grade is formulated for stainless steel alloy fittings to cure more quickly than standard grade anaerobic. Withstands temperatures from -65 ° to 400 °F (-54 ° to 204 °C) continuous, 500 °F (260 °C) intermittent. UL... [See More]
- Substrate Compatibility: Metal
- Type / Form: Grease, Paste
- Cure / Technology: Anaerobic; Single Component
- Features: Non-corrosive
from Henkel Corporation - Industrial
Gasketing Product - tack-free after 10 min. Water- glycol resistance. Ideal for use on flexible flanges, machined or cast surfaces, metal or plastic. LOCTITE ® SI 5699 is a flexible silicone sealant and cures on exposure to moisture in the air to form a tough rubber gasket. The product is... [See More]
- Substrate Compatibility: Metal; Plastic
- Tensile (Break): 435
- Gap Fill: 0.0390
from Hi-Tech Seals, Inc.
HERNON ® offers a complete line of ultraviolet curing adhesives and compounds, the Ultrabond ® line of products. These products are single component systems offering either ultraviolet light or ultraviolet light & primer initiated curing mechanisms. All Ultrabond ® products cure upon... [See More]
- Substrate Compatibility: Ceramic, Glass; Metal
- Cure / Technology: UV or Radiation Cured; Single Component
- Chemical System: Acrylic
- Type / Form: Liquid
from Anti-Seize Technology
AST-SEAL ™HD (Heavy Duty) stainless steel grade is formulated for stainless steel alloy fittings to cure more quickly than standard grade anaerobic. Withstands temperatures from -65 ° to 400 °F (-54 ° to 204 °C) continuous, 500 °F (260 °C) intermittent. UL... [See More]
- Substrate Compatibility: Metal
- Type / Form: Grease, Paste
- Cure / Technology: Anaerobic; Single Component
- Features: Non-corrosive
from Henkel Corporation - Industrial
Silicone-based gasketing product suitable for various substrates. Good resistance to oil and joint movement. LOCTITE ® SI 5900 is a low strength, moisture-cured, thixotropic silicone-based paste. Typical applications include stamped sheet metal covers (timing covers and oil sumps). It exhibits... [See More]
- Substrate Compatibility: Metal; Plastic
- Gap Fill: 0.0390
- Chemical System: Silicone
from Anti-Seize Technology
AST-SEAL ™HD (Heavy Duty) stainless steel grade is formulated for stainless steel alloy fittings to cure more quickly than standard grade anaerobic. Withstands temperatures from -65 ° to 400 °F (-54 ° to 204 °C) continuous, 500 °F (260 °C) intermittent. UL... [See More]
- Substrate Compatibility: Metal
- Type / Form: Grease, Paste
- Cure / Technology: Anaerobic; Single Component
- Features: Non-corrosive
from Henkel Corporation - Industrial
Low strength gasketing product for flexible flanges. Good resistance to oil and joint movement. LOCTITE ® SI 5910 is a low strength, silicone-based gasketing product designed for use on flexible flanges with machined or cast surfaces (metal or plastic). It is suitable for gaps up to 1 mm and... [See More]
- Substrate Compatibility: Metal; Plastic
- Gap Fill: 0.0390
- Chemical System: Silicone
- Use Temperature: 65 to 500
from Anti-Seize Technology
AST-SEAL ™HD (Heavy Duty) stainless steel grade is formulated for stainless steel alloy fittings to cure more quickly than standard grade anaerobic. Withstands temperatures from -65 ° to 400 °F (-54 ° to 204 °C) continuous, 500 °F (260 °C) intermittent. UL... [See More]
- Substrate Compatibility: Metal
- Type / Form: Grease, Paste
- Cure / Technology: Anaerobic; Single Component
- Features: Non-corrosive
from Henkel Corporation - Industrial
Low strength gasketing product for high temperature applications. Suitable for flexible flanges and gaps up to 1 mm. LOCTITE ® SI 5920 is a low strength, silicone-based gasketing product. It is used on flexible flanges with machined or cast surfaces and is particularly suitable for high... [See More]
- Substrate Compatibility: Metal; Plastic
- Gap Fill: 0.0390
- Chemical System: Silicone
- Use Temperature: 65 to 700
from Anti-Seize Technology
AST-SEAL ™HD (Heavy Duty) stainless steel grade is formulated for stainless steel alloy fittings to cure more quickly than standard grade anaerobic. Withstands temperatures from -65 ° to 400 °F (-54 ° to 204 °C) continuous, 500 °F (260 °C) intermittent. UL... [See More]
- Substrate Compatibility: Metal
- Type / Form: Grease, Paste
- Cure / Technology: Anaerobic; Single Component
- Features: Non-corrosive
from Henkel Corporation - Industrial
Clear, 1-part, thixotropic, room temperature-cure, acetoxy silicone vulcanizing compound paste sealant with an acetic acid odor. LOCTITE ® SI 595 is a clear, 1-part, thixotropic, room temperature vulcanizing, acetoxy silicone vulcanizing compound paste sealant with an acetic acid odor. It is... [See More]
- Substrate Compatibility: Ceramic, Glass; Metal; Plastic
- Gap Fill: 0.2360
- Industry: Food
from Anti-Seize Technology
AST-SEAL ™HD (Heavy Duty) stainless steel grade is formulated for stainless steel alloy fittings to cure more quickly than standard grade anaerobic. Withstands temperatures from -65 ° to 400 °F (-54 ° to 204 °C) continuous, 500 °F (260 °C) intermittent. UL... [See More]
- Substrate Compatibility: Metal
- Type / Form: Grease, Paste
- Cure / Technology: Anaerobic; Single Component
- Features: Non-corrosive
from Henkel Corporation - Industrial
Gasketing Product - very good oil resistance. Ideal for use where high vibration or flexing occurs. LOCTITE ® SI 5970 is a silicone sealant and cures on exposure to moisture in the air to form a tough rubber gasket. The product is designed primarily for flexible flange sealing. It is ideally... [See More]
- Substrate Compatibility: Metal; Plastic
- Gap Fill: 0.0390
- Viscosity: 100000
- Use Temperature: 40 to 450
from Anti-Seize Technology
AST-SEAL ™ HYD is an excellent sealant for straight metal threads and created to withstand hydraulic system pressures. It also exhibits high-temp and solvent resistance to water and non-polar solvents. Not for oxygen use. Features and Benefits: Non-shredding, non-contaminating. Made for... [See More]
- Substrate Compatibility: Metal
- Type / Form: Liquid
- Cure / Technology: Anaerobic; Single Component
- Industry: Construction
from Henkel Corporation - Industrial
Designed to repair rubber, urethane, PVC and other parts quickly and durably. Unique for its exceptional handling, curing and performance properties LOCTITE ® PC 7393 is an adhesive, sealant and repair compound all in one convenient, self-mixing belt repair system designed to repair rubber,... [See More]
- Substrate Compatibility: Ceramic, Glass; Metal; Plastic; Rubber or Elastomer
- Cure / Technology: Two Component
- Chemical System: Polyurethane
from Anti-Seize Technology
AST-SEAL ™ HYD is an excellent sealant for straight metal threads and created to withstand hydraulic system pressures. It also exhibits high-temp and solvent resistance to water and non-polar solvents. Not for oxygen use. Features and Benefits: Non-shredding, non-contaminating. Made for... [See More]
- Substrate Compatibility: Metal
- Type / Form: Liquid
- Cure / Technology: Anaerobic; Single Component
- Industry: Construction
from Henkel Corporation - Industrial
Solvent-based paste for general purpose metal pipe sealing. Typically used for lubricating and sealing threaded pipes, pipe fittings and flanges. LOCTITE ® 5113 is an off-white, smooth, solvent-based paste for general purpose metal pipe sealing. Typical applications include lubricating and... [See More]
- Substrate Compatibility: Metal; Plastic
- Cure / Technology: Single Component
- Chemical System: Acrylic
- Features: Threadlocker or Retainer
from Anti-Seize Technology
AST-SEAL ™ HYD is an excellent sealant for straight metal threads and created to withstand hydraulic system pressures. It also exhibits high-temp and solvent resistance to water and non-polar solvents. Not for oxygen use. Features and Benefits: Non-shredding, non-contaminating. Made for... [See More]
- Substrate Compatibility: Metal
- Type / Form: Liquid
- Cure / Technology: Anaerobic; Single Component
- Industry: Construction
from Henkel Corporation - Industrial
White sealant, ideal toolbox product for all metal fittings that won ’t spill or leak. NSF approved. LOCTITE ® 561 is an white, semi-solid methacrylate thread sealant stick, an ideal toolbox product for maintenance and repair that won ’t spill or leak. Fast, reliable curing on... [See More]
- Substrate Compatibility: Metal
- Use Temperature: 65 to 300
- Cure / Technology: Anaerobic; Single Component
from Anti-Seize Technology
AST-SEAL ™ PH is designed to resist all hydraulic fluids and seal Pneumatic/Hydraulic systems and is a thicker, non-running version of AST-SEAL ™ HYD for overhead or inside machinery applications. Not for oxygen use. Features and Benefits: Non-shredding, non-contaminating. Made for... [See More]
- Substrate Compatibility: Metal
- Type / Form: Liquid
- Cure / Technology: Anaerobic; Single Component
- Industry: Construction