Ceramic / Glass Industrial Sealants
from Ellsworth Adhesives
Bostik Epoxy Adhesive 7575 Clear is a two component, structural adhesive that is used for bonding phenolic plastics, glass, wood, masonry, rubber, ceramics, metal, and polyesters. It is typically used for sealing electrical components, encapsulation, and potting applications. It offers fast cure... [See More]
- Substrate Compatibility: Ceramic, Glass; Concrete, Masonry; Metal; Plastic; Rubber or Elastomer; Wood
- Cure / Technology: Two Component
- Chemical System: Epoxy
- Viscosity: 12000 to 16000
from Master Bond, Inc.
MasterSil 157 is a two part system for potting, encapsulation and sealing applications. This optically clear formulation features a low index of refraction and excellent light transmittance. Highly flexible, it is capable of withstanding the most rigorous thermal cycling and mechanical shock. These... [See More]
- Substrate Compatibility: Ceramic, Glass; Composites; Metal; Plastic; Porous Surfaces; Rubber or Elastomer; Dissimilar Substrates
- Composition: Unfilled
- Chemical System: Silicone
- Cure / Technology: Thermoset; Two Component ; Room Temperature Vulcanizing or Curing; Addition Cure
from Ellsworth Adhesives
Bostik Chem-Calk 1200 Clear is a one component, moisture curing, silicone sealant that is used for bonding nonporous materials, aluminum, glass, plastics, and ceramics. It is typically used for sealing doors, windows, skylights, and other building components. 10.1 oz Cartridge. [See More]
- Substrate Compatibility: Ceramic, Glass
- Cure / Technology: Single Component
- Chemical System: Silicone
- Features: Caulk, Grout; Leveling Filling; Gap Filler, Foam in Place Gasket
from Master Bond, Inc.
Master Bond Polymer System EP22 is an aluminum filled, two component epoxy adhesive for high performance bonding, sealing, and coating. It is formulated to cure at room temperature or more rapidly at elevated temperatures, with a non-critical one-to-one mix ratio by weight or volume. The EP22... [See More]
- Substrate Compatibility: Ceramic, Glass; Concrete, Masonry; Composites; Metal; Plastic; Porous Surfaces; Rubber or Elastomer; Dissimilar Substrates; Metal/Plastic/Glass/Ceramic/Elast.&Wood
- Composition: Filled
- Chemical System: Epoxy
- Cure / Technology: Thermoset; Two Component
from Ellsworth Adhesives
Dow DOWSIL ™ 786 Sealant M Clear is a one component, acetoxy curing, silicone rubber that is used for sealing non-porous surfaces around sinks, showers, plumbing, and plumbing fixtures that are exposed to humidity and high temperatures. It is resistant to mildew, moisture, staining, and steam. [See More]
- Substrate Compatibility: Ceramic, Glass
- Cure / Technology: Single Component
- Chemical System: Silicone
- Tensile (Break): 325
from Master Bond, Inc.
EP36FR is a one component, high performance epoxy that meets the Airbus standards from ABD0031, Issue F, June 8, 2005 for flame retardancy. It is used in all kinds of aircraft applications where protection is needed from flames, smoke and materials that might burn. [See More]
- Substrate Compatibility: Ceramic, Glass; Composites; Metal; Plastic; Porous Surfaces; Rubber or Elastomer; Dissimilar Substrates
- Composition: Unfilled
- Chemical System: Epoxy
- Cure / Technology: Thermoset; Single Component
from Ellsworth Adhesives
Dow DOWSIL ™ 786 Sealant M White is a one component, acetoxy curing, silicone rubber that is used for sealing non-porous surfaces around sinks, showers, plumbing, and plumbing fixtures that are exposed to humidity and high temperatures. It is resistant to mildew, moisture, staining, and steam. [See More]
- Substrate Compatibility: Ceramic, Glass
- Cure / Technology: Single Component
- Chemical System: Silicone
- Tensile (Break): 325
from Master Bond, Inc.
One part, nano silica filled UV22DC80-10F has the ability to cure in shadowed out areas. It features a UV and heat curing mechanism. Some noteworthy properties include optical clarity, excellent dimensional stability and outstanding physical strength. [See More]
- Substrate Compatibility: Ceramic, Glass; Composites; Metal; Plastic; Porous Surfaces; Dissimilar Substrates
- Cure / Technology: UV or Radiation Cured; Single Component; Dual Curing
- Composition: Filled
- Type / Form: Liquid
from Ellsworth Adhesives
Dow DOWSIL ™ SE 1700 W/C Thermally Conductive Adhesive Clear is a two-part non-flowing, heat cure, and high tensile strength adhesive. It is primarily used for sealing ceramic condensers, sealing PCB components, and as a bonding agent for key pad of PC. 1.1 kg Kit. [See More]
- Substrate Compatibility: Ceramic, Glass
- Features: Thermally Conductive
- Cure / Technology: Two Component
- Viscosity: 542000
from Master Bond, Inc.
Master Bond X21 is a specially formulated one component system for bonding and priming polyolefinic surfaces. X21 is a very low viscosity( <250 cps) solvent based system that is easy to apply and process. Most often, it is used as a primer to promote adhesion of polyolefinic substrates to other... [See More]
- Substrate Compatibility: Ceramic, Glass; Composites; Metal
- Composition: Unfilled
- Chemical System: Elastomeric
- Cure / Technology: Thermoset; Single Component
from Ellsworth Adhesives
Henkel Loctite STYCAST 2741 Black, formerly Emerson and Cuming, is a two component, room temperature or heat curing, filled epoxy encapsulant that is used for cementing, sealing, and embedding electronic components, plastics, metal, and ceramics. It offers flexibility and crack resistance at low... [See More]
- Substrate Compatibility: Ceramic, Glass; Metal; Plastic
- Cure / Technology: Two Component
- Chemical System: Epoxy
- Features: Encapsulant, Potting Compound
from Master Bond, Inc.
MasterSil 973S-LO is a two component, silver filled silicone with superb electrical and thermal conductivity. Its exceptionally low volume resistivity allows it to be used for many different applications involving bonding, sealing and coating. It is a paste like system with minimal flow. Its... [See More]
- Substrate Compatibility: Ceramic, Glass; Composites; Metal; Plastic; Porous Surfaces; Rubber or Elastomer; Dissimilar Substrates
- Composition: Filled
- Chemical System: Silicone
- Cure / Technology: Thermoset; Two Component ; Addition Cure
from Ellsworth Adhesives
Henkel Loctite STYCAST 2741 LV Black, formerly Emerson and Cuming, is a two component, room temperature curing, filled epoxy encapsulant that is used for cementing, sealing, bonding, and embedding electronic components, plastics, metal, and glass. It offers low viscosity, flexibility, impact and... [See More]
- Substrate Compatibility: Ceramic, Glass; Metal; Plastic
- Cure / Technology: Two Component
- Chemical System: Epoxy
- Features: Encapsulant, Potting Compound
from Master Bond, Inc.
EP3HTSDA-1 is a one part, highly electrically conductive epoxy designed for die attach applications. It dispenses smoothly and easily, without tailing. Its easy handling and desirable performance properties, such as thermal conductivity, die shear strength and dimensional stability, allow it to be... [See More]
- Substrate Compatibility: Ceramic, Glass; Composites; Metal; Plastic; Porous Surfaces; Dissimilar Substrates
- Composition: Unfilled
- Chemical System: Epoxy
- Cure / Technology: Thermoset; Single Component
from Ellsworth Adhesives
Henkel Loctite STYCAST 2741 LV Black, formerly Emerson and Cuming, is a two component, room temperature curing, filled epoxy encapsulant that is used for cementing, sealing, bonding, and embedding electronic components, plastics, metal, and glass. It offers low viscosity, flexibility, impact and... [See More]
- Substrate Compatibility: Ceramic, Glass; Metal; Plastic
- Cure / Technology: Two Component
- Chemical System: Epoxy
- Features: Encapsulant, Potting Compound
from Master Bond, Inc.
EP35SP is a two component epoxy system specially formulated to resist high temperatures and aggressive chemicals. It has a paste viscosity with little to no flow when curing. [See More]
- Substrate Compatibility: Ceramic, Glass; Composites; Metal; Plastic; Porous Surfaces; Rubber or Elastomer; Dissimilar Substrates
- Composition: Unfilled
- Chemical System: Epoxy
- Cure / Technology: Thermoset; Two Component
from Ellsworth Adhesives
Sauereisen Cement Liquid No. 31 Off-White is a ceramic cement that is used for sealing, cementing, insulating, and assembling metal, ceramics, porcelain, and glass. It is heat conductive, fireproof, gasproof, and resistant to electricity, most solvents, oil, acids, high temperatures, and thermal... [See More]
- Substrate Compatibility: Ceramic, Glass
- Features: Encapsulant, Potting Compound
- Chemical System: Ceramic
- Tensile (Break): 400
from Master Bond, Inc.
Master Bond EP30LTE-2 is a two part epoxy with an extraordinarily low coefficient of thermal expansion (CTE).It is used for bonding, sealing, coating and encapsulating. [See More]
- Substrate Compatibility: Ceramic, Glass; Composites; Metal; Plastic; Porous Surfaces; Rubber or Elastomer; Dissimilar Substrates
- Composition: Unfilled
- Chemical System: Epoxy
- Cure / Technology: Thermoset; Two Component ; Room Temperature Vulcanizing or Curing
from Ellsworth Adhesives
Sauereisen Cement Powder No. 31 Off-White is a ceramic cement that is used for sealing, cementing, insulating, and assembling metal, ceramics, porcelain, and glass. It is heat conductive, fireproof, gasproof, and resistant to electricity, most solvents, oil, acids, high temperatures, and thermal... [See More]
- Substrate Compatibility: Ceramic, Glass
- Features: Encapsulant, Potting Compound
- Chemical System: Ceramic
- Tensile (Break): 400
from Master Bond, Inc.
EP93FRHT is a two component epoxy that readily passes the Airbus specifications for flame resistance, smoke emission and toxic gas emission as listed under ABD 0031, Issue F. These tests focus on how quickly this adhesive will self extinguish when subjected to a vertical burn test, optical density... [See More]
- Substrate Compatibility: Ceramic, Glass; Composites; Metal; Plastic; Porous Surfaces; Dissimilar Substrates
- Composition: Unfilled
- Chemical System: Epoxy
- Cure / Technology: Thermoset; Two Component ; Room Temperature Vulcanizing or Curing
from Ellsworth Adhesives
Sauereisen Insa-Lute Adhesive Cement Powder No. 1 Off-White is an inorganic adhesive that is used for bonding, insulating, and encapsulating applications in the assembly, appliance, and automotive fields. During curing it turns into a durable ceramic substance that can be used to seal screws, nuts,... [See More]
- Substrate Compatibility: Ceramic, Glass; Metal
- Tensile (Break): 410
- Chemical System: Ceramic
- Dielectric Strength: 12.5 to 51
from Master Bond, Inc.
EP40Med is a two component, room temperature curing epoxy with high elongation that passes ISO 10993-5 for cytotoxicity. It features exceptional adhesion to polycarbonates and acrylics. [See More]
- Substrate Compatibility: Ceramic, Glass; Composites; Metal; Plastic; Porous Surfaces; Rubber or Elastomer; Dissimilar Substrates
- Composition: Unfilled
- Chemical System: Epoxy
- Cure / Technology: Thermoset; Two Component ; Room Temperature Vulcanizing or Curing
from Ellsworth Adhesives
Sika Sikasil-GP Silicone Sealant Aluminum is a one component, acetoxy-curing sealant that is used for appliance assembly, conventional glazing, marine applications, and sealing of building components, trailers, trucks, and RVs. It also bonds well with painted metals, glass, plastic, wood,... [See More]
- Substrate Compatibility: Ceramic, Glass; Metal; Plastic; Wood
- Cure / Technology: Single Component
- Chemical System: Silicone
- Tensile (Break): 220
from Master Bond, Inc.
MasterSil 170 Gel is an addition cured, two component, low viscosity silicone material for specialty potting and encapsulation. [See More]
- Substrate Compatibility: Ceramic, Glass; Composites; Metal; Plastic; Porous Surfaces; Dissimilar Substrates
- Composition: Unfilled
- Chemical System: Silicone
- Cure / Technology: Thermoset; Two Component ; Room Temperature Vulcanizing or Curing
from Ellsworth Adhesives
Sika Sikasil-GP Silicone Sealant Black is a one component, acetoxy-curing sealant that is used for appliance assembly, conventional glazing, marine applications, and sealing of building components, trailers, trucks, and RVs. It also bonds well with painted metals, glass, plastic, wood, fiberglass,... [See More]
- Substrate Compatibility: Ceramic, Glass; Metal; Plastic; Wood
- Cure / Technology: Single Component
- Chemical System: Silicone
- Tensile (Break): 220
from Master Bond, Inc.
Master Bond Polymer Adhesive EP51 is a fast "5 minute" curing two component epoxy adhesive for general purpose bonding formulated to cure at room temperature with a one-to-one mix ratio by weight or volume. It readily develops a high bonding strength of more than 2000 psi at room temperature. The... [See More]
- Substrate Compatibility: Ceramic, Glass; Composites; Metal; Plastic; Porous Surfaces; Rubber or Elastomer; Metal/Plastic/Glass/Ceramic/Elast.&Wood
- Composition: Unfilled
- Chemical System: Epoxy
- Cure / Technology: Thermoset; Two Component
from Ellsworth Adhesives
Sika Sikasil-GP Silicone Sealant Bronze is a one component, acetoxy-curing sealant that is used for appliance assembly, conventional glazing, marine applications, and sealing of building components, trailers, trucks, and RVs. It also bonds well with painted metals, glass, plastic, wood, fiberglass,... [See More]
- Substrate Compatibility: Ceramic, Glass; Metal; Plastic; Wood
- Cure / Technology: Single Component
- Chemical System: Silicone
- Tensile (Break): 220
from Master Bond, Inc.
Master Bond Polymer System EP39-2 is a fast curing, low viscosity, optically clear two component epoxy system for high performance bonding, sealing, coating and casting. It is 100% reactive and does not contain any diluents, solvents or other volatiles. The mix ratio is a convenient 2 to 1 by... [See More]
- Substrate Compatibility: Ceramic, Glass; Composites; Metal; Plastic; Porous Surfaces
- Composition: Unfilled
- Chemical System: Epoxy
- Cure / Technology: Thermoset; Two Component
from Ellsworth Adhesives
Sika Sikasil-GP Silicone Sealant Aluminum is a one component, acetoxy-curing sealant that is used for appliance assembly, conventional glazing, marine applications, and sealing of building components, trailers, trucks, and RVs. It also bonds well with painted metals, glass, plastic, wood,... [See More]
- Substrate Compatibility: Ceramic, Glass; Metal; Plastic; Wood
- Cure / Technology: Single Component
- Chemical System: Silicone
- Tensile (Break): 220
from Master Bond, Inc.
Master Bond EP62-1 is a two component heat cured and chemically resistant epoxy resin system featuring a long pot life at ambient temperatures and efficient cures at moderately elevated temperatures. The recommended mix ratio is 100 parts of component A to 10 parts of component B. The pot life of... [See More]
- Substrate Compatibility: Ceramic, Glass; Composites; Metal; Porous Surfaces
- Type / Form: Liquid
- Cure / Technology: Thermoset; Two Component
- Features: Encapsulant, Potting Compound; Encapsulant or Conformal Coating; Gap Filler, Foam in Place Gasket
from Master Bond, Inc.
Master Bond X-5 is specially formulated, synthetic elastomer-based, one component adhesive for high performance bonding and sealing. This synthetic elastomer based adhesive bonds well in both shear and peel to similar and dissimilar surfaces including metals, woods, most plastics, ceramics, glass,... [See More]
- Substrate Compatibility: Ceramic, Glass; Composites; Metal
- Composition: Unfilled
- Chemical System: Elastomeric
- Cure / Technology: Thermoset; Single Component
from Master Bond, Inc.
Master Bond Polymer System EP31 is a two component room temperature curing epoxy for high performance structural bonding applications featuring lap shear strengths exceeding 4500 psi. In addition, unlike many structural epoxies, EP31 also has a high peel strength exceeding 40 pli. The service... [See More]
- Substrate Compatibility: Ceramic, Glass; Concrete, Masonry; Composites; Metal; Plastic; Porous Surfaces; Rubber or Elastomer; Dissimilar Substrates; Metal/Plastic/Glass/Ceramic/Elast.&Wood
- Cure / Technology: Thermoset; Two Component
- Chemical System: Epoxy
- Type / Form: Grease, Paste
from Master Bond, Inc.
Master Bond Polymer System EP45HT is a two component epoxy system for high performance structural bonding and casting. It is suitable for applications where long term exposure to temperatures from -80 °F to +500 °F is required. lt is 100% reactive and does not contain any solvents or... [See More]
- Substrate Compatibility: Ceramic, Glass; Composites; Metal; Plastic; Porous Surfaces; Rubber or Elastomer
- Composition: Unfilled
- Chemical System: Epoxy
- Cure / Technology: Thermoset; Two Component
from Master Bond, Inc.
Master Bond Polymer System EP13 is a one component heat curing epoxy featuring high shear strength and very high temperature resistance. This one component system is formulated to cure at temperatures from 300 °F to 350 °F for 60-90 minutes. Upon cure, EP13 readily attains tensile shear... [See More]
- Substrate Compatibility: Ceramic, Glass; Metal
- Composition: Unfilled
- Chemical System: Epoxy
- Cure / Technology: Thermoset; Single Component
from Master Bond, Inc.
Master Bond Polymer System 125 is a two component toughened epoxy resin for prolonged service above 500 °F with truly outstanding chemical resistance. High strength bonds serviceable up to 600 °F can be obtained with this exceptionally thermally stable and chemically resistant epoxy resin... [See More]
- Substrate Compatibility: Ceramic, Glass; Composites; Metal; Plastic; Dissimilar Substrates
- Composition: Unfilled
- Chemical System: Epoxy
- Cure / Technology: Thermoset; Two Component
from Master Bond, Inc.
Master Bond Polymer Adhesive EP33 is a unique room temperature curing two component epoxy adhesive for high temperature bonding applications. It is formulated to cure at room temperature or more rapidly at elevated temperatures. Master Bond Polymer Adhesive EP33 produces high strength bonds whose... [See More]
- Substrate Compatibility: Ceramic, Glass; Concrete, Masonry; Composites; Metal; Plastic; Porous Surfaces; Rubber or Elastomer; Dissimilar Substrates; Metal/Plastic/Glass/Ceramic/Elast.&Wood
- Composition: Unfilled
- Chemical System: Epoxy
- Cure / Technology: Thermoset; Two Component
from Master Bond, Inc.
Master Bond Polymer System EP15 is a one component heat curing epoxy featuring high tensile strength that is utilized in testing the adhesion or cohesive strength of flame-sprayed coatings. This standard test is fully detailed in ASTM specification C 633. EP15 is formulated to cure at temperatures... [See More]
- Substrate Compatibility: Ceramic, Glass; Composites; Metal; Porous Surfaces; Dissimilar Substrates
- Composition: Unfilled
- Chemical System: Epoxy
- Cure / Technology: Thermoset; Single Component
from Reid Supply
Sealants are used to repair, patch or fix imperfections and small gaps in a variety of applications. . 16 oz Gorilla Waterproof Patch and Seal Spray - Black. [See More]
- Substrate Compatibility: Ceramic, Glass; Concrete, Masonry; Metal; Rubber or Elastomer; Textiles or Fabrics; Wood; Metal, Concrete, Wood, Aluminum, Brick, Tile, Fabric, Rubber, Glass
- Features: Gap Filler, Foam in Place Gasket
from Henkel Corporation - Electronics
Loctite ® 5089 ™ Nuva-Sil ® Silicone Gasket / Sealant is used for gasketing and sealing applications. Upon exposure to sufficient UV light and/or atmospheric moisture, this product cures to form a durable, flexible rubber sealant. Typical applications include gasketing/sealing of... [See More]
- Substrate Compatibility: Ceramic, Glass; Metal; Plastic
- Cure / Technology: Single Component
- Chemical System: Epoxy
- Industry: Electronics
from Hi-Tech Seals, Inc.
Classic cyanoacrylates are represented by the ethyl and methyl chemistries. Generally, the methyls offer better bond strengths on metals, the ethyls providing better strengths on everything else. Substrate selection and bond line configuration directly influence adhesive performance. [See More]
- Substrate Compatibility: Ceramic, Glass; Metal; Paper or Paperboard; Plastic; Rubber or Elastomer; Textiles or Fabrics
- Cure / Technology: Single Component; Room Temperature Vulcanizing or Curing
- Chemical System: Cyanoacrylate
- Type / Form: Liquid
from Henkel Corporation - Industrial
LOCTITE 3220W, Epoxy, Adhesive and Sealant LOCTITE ® 3220W is designed for use in heat sensitive optoelectronic components and other microelectronic devices. This material offers excellent light reflection characteristics. LOCTITE 3220W is an white colored version of LOCTITE 3220 adhesive. One... [See More]
- Substrate Compatibility: Ceramic, Glass
- Cure / Technology: Single Component
- Chemical System: Epoxy
- Viscosity: 31800
from Chemence Inc.
KS715 is a fast curing, high strength, silicone RTV adhesive rubber product engineered for applications requiring fast development of physical properties and excellent adhesion. When cured, the elastomer resists weathering, ozone, moisture, UV and high temperatures. KS715 works well in manual and... [See More]
- Substrate Compatibility: Ceramic, Glass; Metal; Plastic
- Cure / Technology: Single Component
- Chemical System: Silicone
- Type / Form: Grease, Paste
from Sauereisen, Inc.
Sauereisen Aluseal Adhesive Cement No. 2 is a ceramic cement paste offering good bond strength and thermal shock. resistant properties for assembling, sealing and cementing porcelain, glass, metal and other materials. Its fine particle size. and excellent flow characteristics make No. 2 a good... [See More]
- Substrate Compatibility: Ceramic, Glass; Metal
- Composition: Unfilled
- Chemical System: Ceramic
- Cure / Technology: Air Setting / Film Drying; Single Component
from Protavic America, Inc.
PNE-47207 ™ is an adhesive/sealant and potting compound. PNE-47207 ™ is designed to provide air free potting and casting of electronic devices. PNE-47207 ™ will bond difficult substrates such as glass, ceramics, and metals. It passes UL 94V0 for fire retardant properties,and has a... [See More]
- Substrate Compatibility: Ceramic, Glass; Metal
- Composition: Filled
- Chemical System: Epoxy
- Cure / Technology: Thermoset; Two Component
from Aremco Products, Inc.
Aremco offers an expansive range of ceramic-based materials used for the assembly of high temperature, high power electrical devices, and high temperature fixtures, molds and tooling. These materials, based on aluminum oxide, aluminum nitride, magnesium oxide, silicon dioxide, silicon carbide,... [See More]
- Substrate Compatibility: Ceramic, Glass; Textiles or Fabrics; Dissimilar Substrates
- Features: Encapsulant or Conformal Coating; Thermally Conductive
- Type / Form: Liquid
- Industry: Electronics
from Phelps Industrial Products
Phelps Style 9815 is 100% RTV (room temperature vulcanizing) silicone that can be used anywhere a high temperature sealant/adhesive is required. This high temp silicone sealant builds a formed-in-place gasket at operating temperatures up to 310 °C. Phelps Style 9815 high temperature silicone... [See More]
- Substrate Compatibility: Ceramic, Glass; Metal
- Composition: Unfilled
- Chemical System: Silicone
- Cure / Technology: Room Temperature Vulcanizing or Curing
from Techsil Limited
Devcon Wear Resistant Putty is a smooth, non-rusting ceramic-filled epoxy putty used to repair and rebuild interfacing metallic, low-friction surfaces such as machine ways and flanges. This product will repair in tight spots where a fine flowing putty is required, it will easily bond to steel, iron,... [See More]
- Substrate Compatibility: Ceramic, Glass; Concrete, Masonry; Metal; Plastic
- Cure / Technology: Thermoset
- Chemical System: Epoxy
- Features: Gap Filler, Foam in Place Gasket
from Epoxy Technology
EPO-TEK ® medical grade (or biocompatible) epoxy adhesives are used extensively throughout the healthcare and biotech industries. Device manufacturers making cardiac, ophthalmic, skeletal and neurological implants rely on our adhesives for protection, while the endoscopy camera market... [See More]
- Substrate Compatibility: Ceramic, Glass
- Cure / Technology: Thermoset; Two Component ; Room Temperature Vulcanizing or Curing
- Chemical System: Epoxy
- Type / Form: Liquid
from Epoxies Etc...
UV 60-7016 is a high performance Ultraviolet Curable Adhesive, Sealant, and Potting Compound. This new one component urethane acrylate system was specifically designed for the difficult bonding of glass to metal. UV 60-7016 has outstanding thermal shock and impact resistance, and is an excellent... [See More]
- Substrate Compatibility: Ceramic, Glass; Metal; Dissimilar Substrates
- Composition: Unfilled
- Chemical System: Elastomeric; Polyurethane
- Cure / Technology: UV or Radiation Cured; Single Component
from Wacker Chemical Corp.
ELASTOSIL ® RT 745 A/B is a pourable, thermally curable, addition-curing, two-part silicone rubber. Special features. two-part, 1 : 1 mixing ratio. low viscosity. low hardness. low risk of inhibition. rapid heat cure. primerless adhesion. Application. encapsulation of electronic components. [See More]
- Substrate Compatibility: Ceramic, Glass; Metal; Dissimilar Substrates
- Cure / Technology: Thermoset; Two Component ; Room Temperature Vulcanizing or Curing; Condensation Cured
- Chemical System: Silicone; Elastomeric
- Type / Form: Grease, Paste
from Hapco, Inc.
Filter-bond ™ is a series of casting and potting compounds ideally suited for potting, sealing, and bonding filtration and ultrafiltration products. The Filter-bond R-Series is manufactured to ultra-high quality standards and has been used by customers to pass FDA approval. Filter-bond ™... [See More]
- Substrate Compatibility: Ceramic, Glass; Metal; Plastic; Textiles or Fabrics; Wood
- Cure / Technology: Two Component
- Chemical System: Polyurethane
- Type / Form: Liquid
from M&I Materials Limited
Apiezon Sealing Compound Q is a versatile, temporary vacuum sealing medium. It is a soft, putty like substance which is easily moulded by hand at ambient temperatures, yet firm enough to remain in position and is readily removed when no longer required. [See More]
- Substrate Compatibility: Ceramic, Glass; Metal; Plastic
- Use Temperature: 14 to 86
from Hi-Tech Seals, Inc.
The Quantum ® group of HERNON ® cyanoacrylates offers specialized performance attributes. This range of grades has been engineered to provide solutions to specific cyanoacrylate challenges. Three categories are offered: surface insensitive, toughened, and low odor-low blooming. [See More]
- Substrate Compatibility: Ceramic, Glass; Metal; Paper or Paperboard; Plastic; Textiles or Fabrics
- Cure / Technology: Single Component; Room Temperature Vulcanizing or Curing
- Chemical System: Cyanoacrylate
- Type / Form: Liquid
from Henkel Corporation - Industrial
1-part, low modulus, flexible, odorless modified silane polymer adhesive used for elastic sealing. It cures to an elastomeric thermoset product. TEROSON ® MS 939NA is a black, white or gray, 1-part, low modulus, flexible, odorless modified silane polymer adhesive used for elastic sealing. It... [See More]
- Substrate Compatibility: Ceramic, Glass; Metal; Plastic
from Sauereisen, Inc.
Sauereisen Cement No. 31 is a white, porcelain-like cement that is widely used throughout industry in a variety of applications. including assembling, sealing, insulating and cementing of ceramics, porcelain, metal, and glass. [See More]
- Substrate Compatibility: Ceramic, Glass; Metal; Porous Surfaces
- Composition: Unfilled
- Chemical System: Ceramic
- Cure / Technology: Two Component ; Chemically Set
from Aremco Products, Inc.
High fired strength, dense ceramics [See More]
- Substrate Compatibility: Ceramic, Glass
- Composition: Filled
- Chemical System: Ceramic
- Cure / Technology: Thermoset
from Epoxies Etc...
10-3508 is a steel filled repair and filling epoxy compound. This non-sag formulation will not drip on vertical surfaces and provides outstanding adhesion to metals, wood, concrete, glass and plastics. [See More]
- Substrate Compatibility: Ceramic, Glass; Concrete, Masonry; Metal; Plastic; Wood
- Composition: Filled
- Chemical System: Epoxy
- Cure / Technology: Thermoset; Two Component ; Room Temperature Vulcanizing or Curing
from Hi-Tech Seals, Inc.
HERNON ® offers a complete line of structural acrylic adhesives. These systems are two-part, no mix, and reactive adhesives. Each acrylic adhesive has two components: the adhesive base or resin, and the Activator. Structural acrylic adhesives are termed “reactive ” cure systems. The... [See More]
- Substrate Compatibility: Ceramic, Glass; Metal; Plastic
- Cure / Technology: Two Component ; Reactive or Moisture Cured
- Chemical System: Acrylic
- Type / Form: Liquid
from Henkel Corporation - Industrial
Oxime silicone paste sealant used for sealing and bonding electrical/electronic components which offers resistance to moisture, chemicals and UV. LOCTITE ® SI 5011CL is a clear, oxime silicone paste sealant used for sealing and bonding electrical/electronic components which offers resistance to... [See More]
- Substrate Compatibility: Ceramic, Glass; Rubber or Elastomer; Wood
- Cure / Technology: Single Component; Room Temperature Vulcanizing or Curing
- Chemical System: Silicone
- Use Temperature: 75 to 500
from Hi-Tech Seals, Inc.
HERNON ® offers a complete line of ultraviolet curing adhesives and compounds, the Ultrabond ® line of products. These products are single component systems offering either ultraviolet light or ultraviolet light & primer initiated curing mechanisms. All Ultrabond ® products cure upon... [See More]
- Substrate Compatibility: Ceramic, Glass; Metal
- Cure / Technology: UV or Radiation Cured; Single Component
- Chemical System: Acrylic
- Type / Form: Liquid
from Henkel Corporation - Industrial
Clear, 1-part, thixotropic, room temperature-cure, acetoxy silicone vulcanizing compound paste sealant with an acetic acid odor. LOCTITE ® SI 595 is a clear, 1-part, thixotropic, room temperature vulcanizing, acetoxy silicone vulcanizing compound paste sealant with an acetic acid odor. It is... [See More]
- Substrate Compatibility: Ceramic, Glass; Metal; Plastic
- Gap Fill: 0.2360
- Industry: Food
from Henkel Corporation - Industrial
Designed to repair rubber, urethane, PVC and other parts quickly and durably. Unique for its exceptional handling, curing and performance properties LOCTITE ® PC 7393 is an adhesive, sealant and repair compound all in one convenient, self-mixing belt repair system designed to repair rubber,... [See More]
- Substrate Compatibility: Ceramic, Glass; Metal; Plastic; Rubber or Elastomer
- Cure / Technology: Two Component
- Chemical System: Polyurethane
from Henkel Corporation - Industrial
Acetoxy dual-cure silicone sealant paste with deep light cure capability, UV and visible, with a secondary moisture cure mechanism for shadow curing. LOCTITE ® SI 5033 is a light yellow, translucent, fluorescent, thixotropic, non-sagging, acetoxy dual-cure silicone sealant paste with deep light... [See More]
- Substrate Compatibility: Ceramic, Glass; Metal
- Cure / Technology: UV or Radiation Cured; Single Component
- Chemical System: Silicone