Thread Locker / Retainer Industrial Sealants
from Hernon Manufacturing, Inc.
UV Curable Cylinlock ® 820 is a fast curing, high-strength anaerobic adhesive designed to retain and seal cylindrical assemblies. Curing occurs when adhesive is confined between mating surfaces. The cured adhesive is a thermoset plastic suitable for exposure to most solvents. Augments or... [See More]
- Features: Threadlocker or Retainer
- Industry: Aerospace; Automotive; Electronics; Electric Power; Military; OEM or Industrial
- Cure / Technology: Thermoset; Room Temperature Vulcanizing or Curing
from Ellsworth Adhesives
Henkel Loctite 078 Threadlocker is a one component, low strength, low viscosity, acrylic adhesive. Used to lock and seal fine threaded studs in a wide variety of applications where very low locking strength is required. This product complies to MIL-S-22473 Grade H. 50 mL Bottle. [See More]
- Features: Threadlocker or Retainer
- Viscosity: 10 to 25
- Cure / Technology: Anaerobic; Single Component
- Thermal Conductivity: 0.1000
from Master Bond, Inc.
Master Bond EP30-4Med is a two part epoxy system with a fast set up time that cures at room temperature, or even more rapidly with a bit of heat. This low viscosity system meets the requirements of ISO 10993-5 testing and is therefore considered to be non-cytotoxic. It can be used for bonding,... [See More]
- Features: High Dielectric; Encapsulant, Potting Compound; Non-corrosive; Threadlocker or Retainer
- Composition: Unfilled
- Chemical System: Epoxy
- Cure / Technology: Thermoset; Two Component ; Room Temperature Vulcanizing or Curing
from Ellsworth Adhesives
Henkel Loctite 079 Threadlocker is a one component, low strength, medium viscosity, acrylic adhesive. Used to lock and seal nuts, bolts, and studs in a wide variety of applications where easy removal or adjustment is necessary. This product complies to MIL-S-22473. 50 mL Bottle. [See More]
- Features: Threadlocker or Retainer
- Viscosity: 100 to 250
- Cure / Technology: Anaerobic; Single Component
- Thermal Conductivity: 0.1000
from Ellsworth Adhesives
Henkel Loctite 080 Threadlocker is a one component, low strength, low viscosity, acrylic adhesive. Used to lock and seal fine threaded nuts, bolts and studs in a wide variety of applications requiring easy removal or adjustment. This product complies to MIL-S-22473E Grade E. 50 mL Bottle. [See More]
- Features: Threadlocker or Retainer
- Viscosity: 10 to 25
- Cure / Technology: Anaerobic; Single Component
- Thermal Conductivity: 0.1000
from Ellsworth Adhesives
Henkel Loctite 081 Threadlocker is a single component, high strength, low viscosity, acrylic adhesive. Used to lock and seal fine threaded nuts, bolts and studs in a wide variety of applications requiring high strength. This product complies to MIL-S-22473. 250 mL Bottle. [See More]
- Features: Threadlocker or Retainer
- Viscosity: 40 to 80
- Cure / Technology: Anaerobic; Single Component
- Thermal Conductivity: 0.1000
from Ellsworth Adhesives
Henkel Loctite 084 Threadlocker is a one component, medium strength, low viscosity, acrylic adhesive. Used to lock and seal fine threaded nuts, bolts and studs in a wide variety of applications where removal with ordinary hand tools in necessary. This product complies to MIL-S-22473E. 50 mL Bottle. [See More]
- Features: Threadlocker or Retainer
- Viscosity: 10 to 25
- Cure / Technology: Anaerobic; Single Component
- Thermal Conductivity: 0.1000
from Ellsworth Adhesives
Henkel Loctite 085 Threadlocker is a one component, medium strength, medium viscosity, acrylic adhesive. Used to lock and seal fine threaded nuts, bolts and studs in a wide variety of applications where removal with ordinary hand tools is necessary. This product complies to MIL-S-22473E. 50 mL... [See More]
- Features: Threadlocker or Retainer
- Viscosity: 100 to 200
- Cure / Technology: Anaerobic; Single Component
- Thermal Conductivity: 0.1000
from Ellsworth Adhesives
Henkel Loctite 087 Threadlocker is a one component, high strength, medium viscosity, acrylic adhesive. Used to lock and seal large coarse threaded nuts, bolts and studs in a wide variety of applications where high locking strength is required. This product complies to MIL-S-22473. 50 mL Bottle. [See More]
- Features: Threadlocker or Retainer
- Viscosity: 100 to 250
- Cure / Technology: Anaerobic; Single Component
- Thermal Conductivity: 0.1000
from Ellsworth Adhesives
Henkel Loctite 088 Threadlocker is a one component, high strength, low viscosity, acrylic adhesive. Used to lock and seal fine threaded nuts, bolts and studs in a wide variety of applications. This product complies to MIL-S-22473E. 50 mL Bottle. [See More]
- Features: Threadlocker or Retainer
- Viscosity: 10 to 25
- Cure / Technology: Anaerobic; Single Component
- Thermal Conductivity: 0.1000
from Ellsworth Adhesives
Henkel Loctite 089 Threadlocker is a one component, high strength, low viscosity, acrylic adhesive. Used to lock and seal fine threaded nuts, bolts and studs in a wide variety of applications. This product complies to MIL-S-22473. 50 mL Bottle. [See More]
- Features: Threadlocker or Retainer
- Substrate Compatibility: Metal
- Cure / Technology: Anaerobic; Single Component
- Viscosity: 10 to 25
from Ellsworth Adhesives
Henkel Loctite 220 Blue Threadlocker is a low strength anaerobic material designed for the locking and sealing of threaded fasteners which require normal disassembly with standard hand tools. 10 mL Bottle. [See More]
- Features: Threadlocker or Retainer
- Viscosity: 10 to 30
- Cure / Technology: Anaerobic; Single Component
from Ellsworth Adhesives
Henkel Loctite 220 Threadlocker is a one component, UV curing acrylic adhesive designed for the locking and sealing of threaded fasteners which require normal disassembly with standard hand tools. 250 mL Bottle. [See More]
- Features: Threadlocker or Retainer
- Viscosity: 10 to 30
- Cure / Technology: Anaerobic; Single Component
from Ellsworth Adhesives
Henkel Loctite 220 Blue Threadlocker is a low strength anaerobic material designed for the locking and sealing of threaded fasteners which require normal disassembly with standard hand tools. 50 mL Bottle. [See More]
- Features: Threadlocker or Retainer
- Viscosity: 10 to 30
- Cure / Technology: Anaerobic; Single Component
from Ellsworth Adhesives
Henkel Loctite 222 Threadlocker is a one component anaerobic material designed for the locking and sealing of threaded fasteners which require easy disassembly with standard hand tools. 10 mL Bottle. [See More]
- Features: Threadlocker or Retainer
- Thermal Conductivity: 0.1000
- Cure / Technology: Anaerobic; Single Component
from Swagelok Company
SWAK Anaerobic Thread Sealant, 250 cm3 Tube [See More]
- Features: Threadlocker or Retainer
- Industry: Construction
- Cure / Technology: Anaerobic
from Techsil Limited
LOCTITE ® 542 is for the use of locking and sealing of metal pipes and fittings. The product cures when confined in the absence of air between close fitting metal surfaces and prevents loosening and leakage from shock and vibration. The thixotropic nature of LOCTITE ® 542 reduces the... [See More]
- Features: Threadlocker or Retainer
from Henkel Corporation - Industrial
Surface Preparation - activator. Solvent-based. Low temperature curing. LOCTITE ® SF 7649 is designed to promote the curing speed of LOCTITE anaerobic adhesives and sealants without any significant loss of joint strength. It is especially recommended for applications with passive metals or... [See More]
- Features: Threadlocker or Retainer
- Cure / Technology: Anaerobic
- Chemical System: Acrylic
- Industry: Military
from Chemence Inc.
KS675 is a single component, low-medium strength, anaerobic pipe sealant. KS675 is a very high viscosity, thixotropic pipe sealing paste possessing high lubricity. KS675 cures when confined in the absence of air between close-fitting metal surfaces. KS675 is formulated to lock and seal medium to... [See More]
- Features: Gap Filler, Foam in Place Gasket; Threadlocker or Retainer
- Type / Form: Grease, Paste
- Cure / Technology: Anaerobic; Two Component (optional feature); Single Component
- Substrate Compatibility: Metal
from Hi-Tech Seals, Inc.
The Nuts N ’ Bolts is an anaerobic adhesive, used in nut and bolt assemblies. When the adhesive is confined between substrates, the oxygen is eliminated and the adhesive cures. These thread locking adhesives offer a wide-range of strengths, viscosities, and temperature ranges for just about... [See More]
- Features: Gap Filler, Foam in Place Gasket; Threadlocker or Retainer
- Cure / Technology: Anaerobic; Single Component
- Chemical System: Acrylic
- Type / Form: Liquid
from ND Industries, Inc.
Vibra-Tite anaerobic retaining compounds are designed to increase shear strength on non-threaded cylindrical metal assemblies. The liquid anaerobic material fills the voids between close-fitting metal parts and cures to a toughened thermoset-plastic which creates a solid one piece assembly. [See More]
- Features: Gap Filler, Foam in Place Gasket; Threadlocker or Retainer
- Type / Form: Liquid
- Cure / Technology: Anaerobic; Single Component
- Substrate Compatibility: Metal
from Princess Auto Limited
Blue Removable Strength Threadlocker [See More]
- Features: Threadlocker or Retainer
- Use Temperature: -65 to 302
from Aremco Products, Inc.
High fired strength, dense ceramics [See More]
- Features: High Dielectric; Gap Filler, Foam in Place Gasket; Thermally Conductive; Threadlocker or Retainer
- Composition: Filled
- Chemical System: Ceramic
- Cure / Technology: Thermoset
from Techsil Limited
LOCTITE ® 620 has been designed for the bonding of cylindrical fitting parts. This product cures when confined in the absence of air between close fitting metal surfaces and prevents loosening and leakage from shock and vibration. The LOCTITE ® 620 is particularly suitable for applications... [See More]
- Features: Gap Filler, Foam in Place Gasket; Threadlocker or Retainer
from Henkel Corporation - Industrial
Solvent-based paste for general purpose metal pipe sealing. Typically used for lubricating and sealing threaded pipes, pipe fittings and flanges. LOCTITE ® 5113 is an off-white, smooth, solvent-based paste for general purpose metal pipe sealing. Typical applications include lubricating and... [See More]
- Features: Threadlocker or Retainer
- Cure / Technology: Single Component
- Chemical System: Acrylic
- Substrate Compatibility: Metal; Plastic
from Chemence Inc.
Krylex KT722 is a high strength, high viscosity, high service temperature, anaerobic thread locker. KT722 cures when confined in the absence of air between close-fitting metal surfaces. KT722 is formulated to lock all metric and imperial nuts and bolts, preventing vibration loosening and leakage... [See More]
- Features: Gap Filler, Foam in Place Gasket; Threadlocker or Retainer
- Type / Form: Liquid
- Cure / Technology: Anaerobic; Two Component (optional feature); Single Component
- Substrate Compatibility: Metal
from Hi-Tech Seals, Inc.
HERNON ® Self Sealer products are tough, pre-applied, non-hardening thread sealants. They provide instant seal on different pipe threads and can be used up to eight (8) times without re-coating. Self-Sealer products are water based, non-toxic, and safe and can be applied easily without special... [See More]
- Features: Threadlocker or Retainer; Water Based
- Type / Form: Liquid
- Chemical System: Acrylic
- Substrate Compatibility: Metal; Plastic
from ND Industries, Inc.
Vibra-Tite anaerobic thread sealants secure metal pipes and fittings by filling the space between threaded metal parts. Thread sealants prevent leakage caused by tape shredding, vibration loosening, solvent evaporation, and damaged threads. Vibra-Tite products are designed for both low and high... [See More]
- Features: Gap Filler, Foam in Place Gasket; Threadlocker or Retainer
- Type / Form: Liquid
- Cure / Technology: Anaerobic; Single Component
- Substrate Compatibility: Metal
from Princess Auto Limited
Medium Strength Blue Gel Thread Locker [See More]
- Features: Threadlocker or Retainer
- Type / Form: Gel
from Techsil Limited
LOCTITE ® 638 is a general purpose thread locker of high bond strength. Designed for the bonding of cylindrical fitting parts, particularly where bond gaps can approach 0.25mm. 638 works not only on active metals but also on passive substrates, exhibiting robust cure performance. It offers high... [See More]
- Features: Threadlocker or Retainer
from Henkel Corporation - Industrial
Dimethacrylate ester acrylic thread sealant which is recommended for industrial applications in many industries. LOCTITE ® 5671 is an off-white to tan colored, waxy consistency, fluorescent dimethacrylate ester acrylic thread sealant. It is recommended for industrial applications in the... [See More]
- Features: Threadlocker or Retainer
- Cure / Technology: Anaerobic; Single Component
- Chemical System: Acrylic
- Substrate Compatibility: Metal
from Princess Auto Limited
Red High Temp/High Strength Threadlocker [See More]
- Features: Threadlocker or Retainer
- Use Temperature: -65 to 450
from Techsil Limited
Loctite ® 641 is designed for the bonding of cylindrical fitting parts, particularly where disassembly is required for service operations. The product cures in the absence of air between close fitting metal surfaces and vibration. Typical applications include retention of bearings onto shafts... [See More]
- Features: Gap Filler, Foam in Place Gasket; Threadlocker or Retainer
from Henkel Corporation - Industrial
Acrylic off-white thread sealant for automatic dispensing applications. Can be reused up to five times. LOCTITE ® DRI 503HV is an off-white, thixotropic, acrylic thread sealing adhesive liquid. This non-toxic product is suitable for automatic dispensing operations, and when dry becomes a... [See More]
- Features: Threadlocker or Retainer
- Cure / Technology: Single Component
- Chemical System: Acrylic
- Type / Form: Liquid
from Princess Auto Limited
Red Permanent Strength Threadlocker [See More]
- Features: Threadlocker or Retainer
- Use Temperature: -65 to 302
from Techsil Limited
LOCTITE ® 648 is designed for the bonding of cylindrical fitting parts. The product cures when confined in the absence of air between close-fitting metal surfaces and prevents loosening and leakage due to shock and vibration It exhibits a robust curing performance. The product also works on... [See More]
- Features: Threadlocker or Retainer
from Henkel Corporation - Industrial
Pre-applied, water-based acrylic thread sealant for automatic dispensing applications which is effective for use on sealing applications. LOCTITE ® DRI 517 is a burnt orange to brown colored, low viscosity, non-toxic, thixotropic, pre-applied, water-based acrylic thread sealant for automatic... [See More]
- Features: Threadlocker or Retainer
- Cure / Technology: Single Component
- Chemical System: Acrylic
- Type / Form: Liquid
from Henkel Corporation - Industrial
LOCTITE ® Letter Grade H Wicking Grade Low Strength Threadlockeris used to lock and seal fine threaded studs in a wide variety of applications where very low locking strength is required. Note: This is a regional approval. Please contact your local Technical Service Center for more information... [See More]
- Features: Threadlocker or Retainer
from Henkel Corporation - Industrial
Sealant paste designed for metal threaded pipes and fittings in industrial applications which is particularly suitable for sealing steel metal joints. LOCTITE ® 5770 is an off-white to purplish gray dimethacrylate ester acrylic sealant paste designed for locking and sealing metal threaded pipes... [See More]
- Features: Threadlocker or Retainer
- Use Temperature: 65 to 530
- Cure / Technology: Anaerobic; Single Component
from Henkel Corporation - Industrial
LOCTITE DRI 203 ECO Threadlocker is a low strength, preapplied threadlocking adhesive and sealant, which provides excellent resistance to vibration loosening on any threaded fastener. [See More]
- Features: Threadlocker or Retainer
from Henkel Corporation - Industrial
LOCTITE ® DRI STS ™ Pre-applied Threadlocker / Thread Sealant is a medium strength, preapplied threadlocker and sealant for fasteners with straight threads. This fast cure adhesive is activated during assembly and cures to form a tough polymer that eliminates movement. Meets... [See More]
- Features: Threadlocker or Retainer
from Henkel Corporation - Industrial
Reactive monomer-based, solvent-free dimethacrylate ester surface primer paste for LOCTITE anaerobic adhesives and sealants supplied in stick form. LOCTITE ® SF 7088 is a turquoise, reactive monomer-based, solvent-free dimethacrylate ester surface primer paste for LOCTITE anaerobic adhesives... [See More]
- Features: Threadlocker or Retainer
- Cure / Technology: Anaerobic; Single Component