Thermosetting / Crosslinking Industrial Sealants
from ELANTAS North America LLC
ELANTAS PDG, Inc., founded in 1919 and based in St. Louis, Missouri, is a premier global supplier of specialty resins for applications in the electrical and electronic industries. ELANTAS Electrical Insulation companies are respected as the market leaders in the development and manufacturing of wire... [See More]
- Cure / Technology: Thermoset; Two Component
- Composition: Filled
- Chemical System: Epoxy
- Type / Form: Grease, Paste
from Hernon Manufacturing, Inc.
External Ammunition Sealant 76040 is a single component, U.V curable anaerobic sealant. 76040 has a low viscosity penetrating material capable of bonding and sealing primers and case mouths in ammunition. It is specially formulated for pre-assembled components; it works by capillary action sealing... [See More]
- Cure / Technology: Thermoset; UV or Radiation Cured; Single Component; Room Temperature Vulcanizing or Curing
- Industry: Aerospace; Automotive; Electronics; Electric Power; Military; OEM or Industrial
from Master Bond, Inc.
MasterSil 157 is a two part system for potting, encapsulation and sealing applications. This optically clear formulation features a low index of refraction and excellent light transmittance. Highly flexible, it is capable of withstanding the most rigorous thermal cycling and mechanical shock. These... [See More]
- Cure / Technology: Thermoset; Two Component ; Room Temperature Vulcanizing or Curing; Addition Cure
- Composition: Unfilled
- Chemical System: Silicone
- Type / Form: Liquid
from Hernon Manufacturing, Inc.
External Ammunition Sealant 76041 is a single component U.V. anaerobic sealant. 76041 has a low viscosity penetrating material capable of bonding and sealing primers and case mouths in ammunition. It is specially formulated for pre-assembled components; it works by capillary action sealing... [See More]
- Cure / Technology: Thermoset; UV or Radiation Cured; Single Component; Room Temperature Vulcanizing or Curing
- Industry: Aerospace; Automotive; Electronics; Electric Power; Military; OEM or Industrial
from Master Bond, Inc.
Master Bond Polymer System EP22 is an aluminum filled, two component epoxy adhesive for high performance bonding, sealing, and coating. It is formulated to cure at room temperature or more rapidly at elevated temperatures, with a non-critical one-to-one mix ratio by weight or volume. The EP22... [See More]
- Cure / Technology: Thermoset; Two Component
- Composition: Filled
- Chemical System: Epoxy
- Type / Form: Grease, Paste
from Hernon Manufacturing, Inc.
External Ammunition Sealant 76060 is a single component U.V. anaerobic sealant. 76060 has a low viscosity penetrating material capable of bonding and sealing primers and case mouths in ammunition. It is specially formulated for pre-assembled components; it works by capillary action sealing... [See More]
- Cure / Technology: Thermoset; UV or Radiation Cured; Single Component; Room Temperature Vulcanizing or Curing
- Industry: Aerospace; Automotive; Electronics; Electric Power; Military; OEM or Industrial
from Master Bond, Inc.
EP36FR is a one component, high performance epoxy that meets the Airbus standards from ABD0031, Issue F, June 8, 2005 for flame retardancy. It is used in all kinds of aircraft applications where protection is needed from flames, smoke and materials that might burn. [See More]
- Cure / Technology: Thermoset; Single Component
- Composition: Unfilled
- Chemical System: Epoxy
- Type / Form: Liquid
from Hernon Manufacturing, Inc.
External Ammunition Sealant 76061 is a single component U.V. anaerobic sealant. 76061 has a low viscosity penetrating material capable of bonding and sealing primers and case mouths in ammunition. It is specially formulated for pre-assembled components; it works by capillary action sealing... [See More]
- Cure / Technology: Thermoset; UV or Radiation Cured; Single Component; Room Temperature Vulcanizing or Curing
- Industry: Aerospace; Automotive; Electronics; Electric Power; Military; OEM or Industrial
from Master Bond, Inc.
Master Bond X21 is a specially formulated one component system for bonding and priming polyolefinic surfaces. X21 is a very low viscosity( <250 cps) solvent based system that is easy to apply and process. Most often, it is used as a primer to promote adhesion of polyolefinic substrates to other... [See More]
- Cure / Technology: Thermoset; Single Component
- Composition: Unfilled
- Chemical System: Elastomeric
- Type / Form: Liquid
from Hernon Manufacturing, Inc.
External Ammunition Sealant 76081 is a single component U.V. anaerobic sealant. 76081 has a low viscosity penetrating material capable of bonding and sealing primers and case mouths in ammunition. This Sealant is specially formulated for Ammunition that needs greater fit tolerance and higher bullet... [See More]
- Cure / Technology: Thermoset; UV or Radiation Cured; Single Component; Room Temperature Vulcanizing or Curing
- Industry: Aerospace; Automotive; Electronics; Electric Power; Military; OEM or Industrial
from Master Bond, Inc.
MasterSil 973S-LO is a two component, silver filled silicone with superb electrical and thermal conductivity. Its exceptionally low volume resistivity allows it to be used for many different applications involving bonding, sealing and coating. It is a paste like system with minimal flow. Its... [See More]
- Cure / Technology: Thermoset; Two Component ; Addition Cure
- Composition: Filled
- Chemical System: Silicone
- Type / Form: Grease, Paste
from Hernon Manufacturing, Inc.
External Ammunition Sealant 76082 is a single component U.V. anaerobic sealant. 76082 has a low viscosity penetrating material capable of bonding and sealing primers and case mouths in ammunition. This Sealant is specially formulated for Ammunition that needs greater fit tolerance and higher bullet... [See More]
- Cure / Technology: Thermoset; UV or Radiation Cured; Single Component; Room Temperature Vulcanizing or Curing
- Industry: Aerospace; Automotive; Electronics; Electric Power; Military; OEM or Industrial
from Master Bond, Inc.
EP3HTSDA-1 is a one part, highly electrically conductive epoxy designed for die attach applications. It dispenses smoothly and easily, without tailing. Its easy handling and desirable performance properties, such as thermal conductivity, die shear strength and dimensional stability, allow it to be... [See More]
- Cure / Technology: Thermoset; Single Component
- Composition: Unfilled
- Chemical System: Epoxy
- Type / Form: Liquid
from Hernon Manufacturing, Inc.
External Ammunition Sealant 76083 is a single component U.V. anaerobic sealant. 76083 has a low viscosity penetrating material capable of bonding and sealing primers and case mouths in ammunition. This Sealant is specially formulated for Ammunition that needs greater fit tolerance and higher bullet... [See More]
- Cure / Technology: Thermoset; UV or Radiation Cured; Single Component; Room Temperature Vulcanizing or Curing
- Industry: Aerospace; Automotive; Electronics; Electric Power; Military; OEM or Industrial
from Master Bond, Inc.
EP35SP is a two component epoxy system specially formulated to resist high temperatures and aggressive chemicals. It has a paste viscosity with little to no flow when curing. [See More]
- Cure / Technology: Thermoset; Two Component
- Composition: Unfilled
- Chemical System: Epoxy
- Substrate Compatibility: Ceramic, Glass; Composites; Metal; Plastic; Porous Surfaces; Rubber or Elastomer; Dissimilar Substrates
from Hernon Manufacturing, Inc.
External Ammunition Sealant 76084 is a single component U.V. anaerobic sealant. 76084 has a low viscosity penetrating material capable of bonding and sealing primers and case mouths in ammunition. This Sealant is specially formulated for Ammunition that needs greater fit tolerance and higher bullet... [See More]
- Cure / Technology: Thermoset; UV or Radiation Cured; Single Component; Room Temperature Vulcanizing or Curing
- Industry: Aerospace; Automotive; Electronics; Electric Power; Military; OEM or Industrial
from Master Bond, Inc.
Master Bond EP30LTE-2 is a two part epoxy with an extraordinarily low coefficient of thermal expansion (CTE).It is used for bonding, sealing, coating and encapsulating. [See More]
- Cure / Technology: Thermoset; Two Component ; Room Temperature Vulcanizing or Curing
- Composition: Unfilled
- Chemical System: Epoxy
- Type / Form: Liquid
from Hernon Manufacturing, Inc.
Grenade Igniter Case Sealant 40995 is a single component anaerobic thread locking and sealing adhesive. Grenade Igniter Case Sealant 40995 is a low viscosity penetrating material that works by capillary action between mating surfaces. The cured adhesive is a high-performance thermoset plastic... [See More]
- Cure / Technology: Thermoset; UV or Radiation Cured; Single Component; Room Temperature Vulcanizing or Curing
- Industry: Aerospace; Automotive; Electronics; Electric Power; Military; OEM or Industrial
from Master Bond, Inc.
EP93FRHT is a two component epoxy that readily passes the Airbus specifications for flame resistance, smoke emission and toxic gas emission as listed under ABD 0031, Issue F. These tests focus on how quickly this adhesive will self extinguish when subjected to a vertical burn test, optical density... [See More]
- Cure / Technology: Thermoset; Two Component ; Room Temperature Vulcanizing or Curing
- Composition: Unfilled
- Chemical System: Epoxy
- Type / Form: Liquid
from Hernon Manufacturing, Inc.
Grenade Igniter Case Sealant 47422 is a single component UV and anaerobic curing adhesive. Grenade Igniter Case Sealant 47422 is a low viscosity penetrating material that works by capillary action between mating surfaces. The cured adhesive is a high performance thermoset plastic suitable for... [See More]
- Cure / Technology: Thermoset; UV or Radiation Cured; Single Component; Room Temperature Vulcanizing or Curing
- Industry: Aerospace; Automotive; Electronics; Electric Power; Military; OEM or Industrial
from Master Bond, Inc.
EP40Med is a two component, room temperature curing epoxy with high elongation that passes ISO 10993-5 for cytotoxicity. It features exceptional adhesion to polycarbonates and acrylics. [See More]
- Cure / Technology: Thermoset; Two Component ; Room Temperature Vulcanizing or Curing
- Composition: Unfilled
- Chemical System: Epoxy
- Type / Form: Liquid
from Hernon Manufacturing, Inc.
UV Curable Cylinlock ® 820 is a fast curing, high-strength anaerobic adhesive designed to retain and seal cylindrical assemblies. Curing occurs when adhesive is confined between mating surfaces. The cured adhesive is a thermoset plastic suitable for exposure to most solvents. Augments or... [See More]
- Cure / Technology: Thermoset; Room Temperature Vulcanizing or Curing
- Industry: Aerospace; Automotive; Electronics; Electric Power; Military; OEM or Industrial
- Features: Threadlocker or Retainer
from Master Bond, Inc.
MasterSil 170 Gel is an addition cured, two component, low viscosity silicone material for specialty potting and encapsulation. [See More]
- Cure / Technology: Thermoset; Two Component ; Room Temperature Vulcanizing or Curing
- Composition: Unfilled
- Chemical System: Silicone
- Type / Form: Liquid
from Hernon Manufacturing, Inc.
Dripstop ® 943 is an adhesive/sealant specifically formulated for the sealing and mild locking of Hydraulic and Pneumatic threaded parts. Dripstop ® 943 will positively seal pipe threads, standard nuts and bolts, fittings for hydraulic and pneumatic systems, air conditioners, fittings for... [See More]
- Cure / Technology: Thermoset; Single Component; Room Temperature Vulcanizing or Curing
- Industry: Aerospace; Automotive; Electronics; Electric Power; Military; OEM or Industrial
from Master Bond, Inc.
Master Bond Polymer Adhesive EP51 is a fast "5 minute" curing two component epoxy adhesive for general purpose bonding formulated to cure at room temperature with a one-to-one mix ratio by weight or volume. It readily develops a high bonding strength of more than 2000 psi at room temperature. The... [See More]
- Cure / Technology: Thermoset; Two Component
- Composition: Unfilled
- Chemical System: Epoxy
- Type / Form: Liquid
from Hernon Manufacturing, Inc.
Dripstop ® 945 is a high-performance adhesive/sealant specifically formulated for the sealing and mild locking of hydraulic and pneumatic threaded parts used with hydraulic and pneumatic equipment. Dripstop ® 945 will seal pipe threads, standard nuts and bolts, fittings for hydraulic and... [See More]
- Cure / Technology: Thermoset; Single Component; Room Temperature Vulcanizing or Curing
- Industry: Aerospace; Automotive; Electronics; Electric Power; Military; OEM or Industrial
from Master Bond, Inc.
Master Bond Polymer System EP39-2 is a fast curing, low viscosity, optically clear two component epoxy system for high performance bonding, sealing, coating and casting. It is 100% reactive and does not contain any diluents, solvents or other volatiles. The mix ratio is a convenient 2 to 1 by... [See More]
- Cure / Technology: Thermoset; Two Component
- Composition: Unfilled
- Chemical System: Epoxy
- Type / Form: Grease, Paste
from Hernon Manufacturing, Inc.
Dripstop ® 946 is a high-performance adhesive/sealant specifically formulated for the sealing and mild locking of hydraulic and pneumatic threaded parts used with hydraulic and pneumatic equipment. Dripstop ® 946 will seal pipe threads, standard nuts and bolts, fittings for hydraulic and... [See More]
- Cure / Technology: Thermoset; Single Component; Room Temperature Vulcanizing or Curing
- Industry: Aerospace; Automotive; Electronics; Electric Power; Military; OEM or Industrial
from Master Bond, Inc.
Master Bond EP62-1 is a two component heat cured and chemically resistant epoxy resin system featuring a long pot life at ambient temperatures and efficient cures at moderately elevated temperatures. The recommended mix ratio is 100 parts of component A to 10 parts of component B. The pot life of... [See More]
- Cure / Technology: Thermoset; Two Component
- Substrate Compatibility: Ceramic, Glass; Composites; Metal; Porous Surfaces
- Type / Form: Liquid
- Features: Encapsulant, Potting Compound; Encapsulant or Conformal Coating; Gap Filler, Foam in Place Gasket
from Hernon Manufacturing, Inc.
Dripstop ® 947 is a high-performance adhesive/sealant specifically formulated for the sealing and mild locking of hydraulic and pneumatic threaded parts used with hydraulic and pneumatic equipment. Dripstop ® 947 will seal pipe threads, standard nuts and bolts, fittings for hydraulic and... [See More]
- Cure / Technology: Thermoset; Single Component; Room Temperature Vulcanizing or Curing
- Industry: Aerospace; Automotive; Electronics; Electric Power; Military; OEM or Industrial
from Master Bond, Inc.
Master Bond X-5 is specially formulated, synthetic elastomer-based, one component adhesive for high performance bonding and sealing. This synthetic elastomer based adhesive bonds well in both shear and peel to similar and dissimilar surfaces including metals, woods, most plastics, ceramics, glass,... [See More]
- Cure / Technology: Thermoset; Single Component
- Composition: Unfilled
- Chemical System: Elastomeric
- Type / Form: Liquid
from Hernon Manufacturing, Inc.
Hernon ® External Ammunition Sealant 76984 is a single component high strength U.V. anaerobic sealant. 76984 has a low viscosity penetrating material capable of bonding and sealing primers and case mouths in ammunition. This Sealant is specially formulated for Ammunition that needs greater fit... [See More]
- Cure / Technology: Thermoset; UV or Radiation Cured; Single Component; Room Temperature Vulcanizing or Curing
- Industry: Aerospace; Automotive; Electronics; Electric Power; Military; OEM or Industrial
from Master Bond, Inc.
Master Bond Polymer System EP31 is a two component room temperature curing epoxy for high performance structural bonding applications featuring lap shear strengths exceeding 4500 psi. In addition, unlike many structural epoxies, EP31 also has a high peel strength exceeding 40 pli. The service... [See More]
- Cure / Technology: Thermoset; Two Component
- Type / Form: Grease, Paste
- Chemical System: Epoxy
- Substrate Compatibility: Ceramic, Glass; Concrete, Masonry; Composites; Metal; Plastic; Porous Surfaces; Rubber or Elastomer; Dissimilar Substrates; Metal/Plastic/Glass/Ceramic/Elast.&Wood
from Master Bond, Inc.
Master Bond Polymer System EP45HT is a two component epoxy system for high performance structural bonding and casting. It is suitable for applications where long term exposure to temperatures from -80 °F to +500 °F is required. lt is 100% reactive and does not contain any solvents or... [See More]
- Cure / Technology: Thermoset; Two Component
- Composition: Unfilled
- Chemical System: Epoxy
- Type / Form: Grease, Paste
from Master Bond, Inc.
Master Bond Polymer System EP13 is a one component heat curing epoxy featuring high shear strength and very high temperature resistance. This one component system is formulated to cure at temperatures from 300 °F to 350 °F for 60-90 minutes. Upon cure, EP13 readily attains tensile shear... [See More]
- Cure / Technology: Thermoset; Single Component
- Composition: Unfilled
- Chemical System: Epoxy
- Substrate Compatibility: Ceramic, Glass; Metal
from Master Bond, Inc.
Master Bond Polymer System 125 is a two component toughened epoxy resin for prolonged service above 500 °F with truly outstanding chemical resistance. High strength bonds serviceable up to 600 °F can be obtained with this exceptionally thermally stable and chemically resistant epoxy resin... [See More]
- Cure / Technology: Thermoset; Two Component
- Composition: Unfilled
- Chemical System: Epoxy
- Type / Form: Grease, Paste; Powder
from Master Bond, Inc.
Master Bond Polymer Adhesive EP33 is a unique room temperature curing two component epoxy adhesive for high temperature bonding applications. It is formulated to cure at room temperature or more rapidly at elevated temperatures. Master Bond Polymer Adhesive EP33 produces high strength bonds whose... [See More]
- Cure / Technology: Thermoset; Two Component
- Composition: Unfilled
- Chemical System: Epoxy
- Type / Form: Grease, Paste
from Master Bond, Inc.
Master Bond Polymer System EP15 is a one component heat curing epoxy featuring high tensile strength that is utilized in testing the adhesion or cohesive strength of flame-sprayed coatings. This standard test is fully detailed in ASTM specification C 633. EP15 is formulated to cure at temperatures... [See More]
- Cure / Technology: Thermoset; Single Component
- Composition: Unfilled
- Chemical System: Epoxy
- Type / Form: Grease, Paste
from Master Bond, Inc.
Master Bond Polymer System EP29LP is a two component high performance epoxy resin system featuring low viscosity, long pot life and low exotherm. As an adhesive this versatile material will form bond strengths in excess of 2,500 psi (aluminum to aluminum). It bonds well to a variety of substrates... [See More]
- Cure / Technology: Thermoset; Two Component
- Composition: Unfilled
- Chemical System: Epoxy
- Type / Form: Grease, Paste
from Master Bond, Inc.
Master Bond Polymer System EP29LPSP is a two component, high performance, modified low temperature heat cured epoxy system specially formulated for cryogenic applications. Not only is EP29LPSP able to function as an adhesive, sealant and protective coating at temperatures as low as 4K, but it is... [See More]
- Cure / Technology: Thermoset; Two Component
- Composition: Unfilled
- Chemical System: Epoxy
- Type / Form: Liquid
from Master Bond, Inc.
Master Bond Polymer System EP112 is a solventless, low viscosity two component cycloaliphatic epoxy resin system which is specifically designed for high performance outdoor and indoor electrical/electronicc/ structural applications. The two components are combined in a convenient noncritical mix... [See More]
- Cure / Technology: Thermoset; Two Component
- Composition: Unfilled
- Chemical System: Epoxy
- Type / Form: Liquid
from Master Bond, Inc.
Two component, EP30LP-2 produces high strength, rigid bonds with exceptionally low linear shrinkage for bonding, sealing, coating, and encapsulation applications. This system is very resistant to chemicals including water, oils, solvents, acids and bases. [See More]
- Cure / Technology: Thermoset; Two Component ; Room Temperature Vulcanizing or Curing
- Composition: Unfilled
- Chemical System: Epoxy
- Type / Form: Liquid
from Protavic America, Inc.
PNE-47207 ™ is an adhesive/sealant and potting compound. PNE-47207 ™ is designed to provide air free potting and casting of electronic devices. PNE-47207 ™ will bond difficult substrates such as glass, ceramics, and metals. It passes UL 94V0 for fire retardant properties,and has a... [See More]
- Cure / Technology: Thermoset; Two Component
- Composition: Filled
- Chemical System: Epoxy
- Type / Form: Liquid
from Wacker Chemical Corp.
WACKER ’s silicone adhesives and sealants are based on many years of experience, innovative research and comprehensive technological expertise. In a wide variety of industries, especially in lighting technology, flowable or non-sag silicone products offer decisive advantages in performance and... [See More]
- Cure / Technology: Thermoset
- Type / Form: Liquid
- Chemical System: Silicone; Elastomeric
- Industry: OEM or Industrial
from 3M Aerospace and Aircraft Maintenance Division
Two-Part, 30/70 Mix Ratio of Base to Hardener. Designed to cure at room temperature of 70-80F [21-27C]. Cured material exhibits excellent flexibility and adhesion. Low flow, soft paste viscosity permits application on vertical or overhead surfaces with a minimum of run-off. [See More]
- Cure / Technology: Thermoset; Two Component ; Room Temperature Vulcanizing or Curing
- Type / Form: Grease, Paste
- Chemical System: Epoxy
- Features: Flexible
from Aremco Products, Inc.
Used for repairing metal components, pinholes, cracks, and filling seams. [See More]
- Cure / Technology: Air Setting / Film Drying; Thermoset
- Composition: Filled
- Chemical System: Ceramic
- Type / Form: Grease, Paste
from Epoxy Technology
EPO-TEK ® medical grade (or biocompatible) epoxy adhesives are used extensively throughout the healthcare and biotech industries. Device manufacturers making cardiac, ophthalmic, skeletal and neurological implants rely on our adhesives for protection, while the endoscopy camera market... [See More]
- Cure / Technology: Thermoset; Two Component ; Room Temperature Vulcanizing or Curing
- Type / Form: Liquid
- Chemical System: Epoxy
- Substrate Compatibility: Ceramic, Glass
from Sherwin-Williams Protective & Marine Coatings
ENVIROLASTIC AR530 BRUSH GRADE is a 100% solids, fluid applied polyurea elastomer repair material that is based on proprietary polyurea formulation and a modified amine curing mechanism. It can be applied at thicknesses of 30 - 250 mils in consecutive multiple applications. Fast cure short downtime. [See More]
- Cure / Technology: Thermoset; Two Component
- Composition: Unfilled
- Chemical System: Polyurethane
- Type / Form: Pellets
from Epoxies Etc...
10-3022 is a two component epoxy adhesive and sealant. This structural adhesive has excellent chemical and heat resistance. 10-3022 is widely used as a stencil and screen adhesive due to its bonding strength and toughness. It has been used extensively to bond polyester mesh to aluminum frames and... [See More]
- Cure / Technology: Thermoset; Two Component ; Room Temperature Vulcanizing or Curing
- Composition: Unfilled
- Chemical System: Epoxy
- Type / Form: Liquid
from Techsil Limited
Devcon Wear Resistant Putty is a smooth, non-rusting ceramic-filled epoxy putty used to repair and rebuild interfacing metallic, low-friction surfaces such as machine ways and flanges. This product will repair in tight spots where a fine flowing putty is required, it will easily bond to steel, iron,... [See More]
- Cure / Technology: Thermoset
- Substrate Compatibility: Ceramic, Glass; Concrete, Masonry; Metal; Plastic
- Chemical System: Epoxy
- Features: Gap Filler, Foam in Place Gasket
from Henkel Corporation - Electronics
LOCTITE 5210 is an ultra fast curing, non-corrosive RTV silicone designed for potting, wire tracking, selective sealing, vibration dampening and repair/rework applications on PCB's. [See More]
- Cure / Technology: Thermoset; Single Component; Room Temperature Vulcanizing or Curing
- Industry: Electronics
- Chemical System: Silicone
- Elongation: 230.0
from Acoustical Solutions, Inc.
Acoustical Caulk is a non-flammable, latex based sealant specially designed for the reduction of sound transmission and drafts in all types of wall systems. Acoustical Caulk remains flexible and adheres firmly to wood, metal studs, concrete, gypsum board and most other building materials. Acoustical... [See More]
- Cure / Technology: Thermoset; Single Component
- Type / Form: Grease, Paste
- Chemical System: Elastomeric
- Substrate Compatibility: Concrete, Masonry; Metal; Paper or Paperboard; Wood; Dissimilar Substrates; Gypsum Board
from Protavic America, Inc.
Fast flow, fast cure capillary reworkable underfill. The rheology of the PROTAVIC ANA 10199 R in combination with its fineness make the product perfectly adapted to high reliability small gap underfill applications. It presents a good pot life at room temperature 20-22C and a high reactivity at... [See More]
- Cure / Technology: Thermoset; Single Component
- Type / Form: Liquid
- Composition: Unfilled
- Features: High Dielectric; Gap Filler, Foam in Place Gasket; Thermal Insulation
from Wacker Chemical Corp.
ELASTOSIL ® N199 is a non-slump RTV-1 silicone sealant that cures at room temperature on contact with moisture in the air. Special features. ready-to-use, one-part system. non-slump. translucent. medium hardness. high flexibility. Excellent adhesion. Application. general-purpose adhesive for the... [See More]
- Cure / Technology: Thermoset; Single Component; Reactive or Moisture Cured; Room Temperature Vulcanizing or Curing
- Type / Form: Grease, Paste
- Chemical System: Silicone; Elastomeric
- Features: Flexible
from 3M Aerospace and Aircraft Maintenance Division
3M ™ Scotch-Weld ™ Core Splice Adhesive EC-3500 B/A is a two-part core splicing material designed for filling mismatch areas and reinforcing honeycomb core. [See More]
- Cure / Technology: Thermoset; Two Component
- Type / Form: Grease, Paste
- Chemical System: Epoxy
- Substrate Compatibility: Honeycomb Core
from Sherwin-Williams Protective & Marine Coatings
HEAVY DUTY BLOCK FILLER is a pure acrylic resin block filler for use on interior and exterior poured and precast concrete, concrete block, and cinder block. Excellent moisture resistance. Excellent filling characteristics. Suitable for use in USDA inspected facilities. Resurface spalled and... [See More]
- Cure / Technology: Thermoset; Single Component
- Composition: Unfilled
- Chemical System: Acrylic
- Type / Form: Liquid
from Epoxies Etc...
20-2100 FR is a two component, room temperature curing, low viscosity polyurethane system for potting, casting, encapsulating and sealing electronic components and assemblies. 20-2100 FR is a flame retardant self extinguishing system. It meets the stringent requirements of UL 94-VO. Designed for... [See More]
- Cure / Technology: Thermoset; Two Component ; Room Temperature Vulcanizing or Curing
- Composition: Unfilled
- Chemical System: Elastomeric; Polyurethane
- Type / Form: Liquid
from Techsil Limited
Elecolit ® 6603 is a thermally conductive epoxy with very good metal adhesion and slight flexibility. This grade has very good flow behavior and can easily be processed using a dispenser, spreading knife or spatula. Although designed for bonding applications, 6603 can also be used as a potting... [See More]
- Cure / Technology: Thermoset
- Features: Electrically Conductive; Thermally Conductive
- Chemical System: Epoxy
- Industry: Electronics
from 3M Aerospace and Aircraft Maintenance Division
3M ™ Scotch-Weld ™ Core Splice Adhesive Film AF 3002 is a 250-350 °F (121-177 °C) curing, low density, expandable product designed for the purpose of filling mismatched areas, and for splicing and reinforcing honeycomb core. High performance over the -67F to 250F (-55C to 12C)... [See More]
- Cure / Technology: Thermoset; Single Component
- Type / Form: Sheet or Film
- Chemical System: Epoxy
- Substrate Compatibility: Honeycomb Core
from Sherwin-Williams Protective & Marine Coatings
Cement-Plexl ® 875 is a heavy duty, interior/exterior, VOC compliant, two component, cementitious, acrylic, waterborne block filler, which accepts both conventional and high performance topcoats. When topcoated, this product provides an excellent coating system for moderate service environments... [See More]
- Cure / Technology: Thermoset; Two Component
- Composition: Unfilled
- Chemical System: Ceramic; Acrylic
- Type / Form: Liquid
from Techsil Limited
Elecolit ® 323 is a silver filled two part epoxy adhesive specially developed for bonding open chip components. This semiconducting grade has passed the autoclave test (1000h) and is suitable for use on semi conductors, it has no effect on bond wire adhesion. It can cured at either room... [See More]
- Cure / Technology: Thermoset
- Features: Electrically Conductive
- Chemical System: Epoxy
- Industry: Electronics
from 3M Aerospace and Aircraft Maintenance Division
3M ™ Scotch-Weld ™ Structural Adhesive EC-3587 B/A Gray is a two-part polyurethane that cures at room temperature or with heat to a tough, impact-resistant material. It has excellent adhesion to many metal and plastic substrates. It can be used as structural adhesive, void filler, or as... [See More]
- Cure / Technology: Thermoset; Two Component ; Room Temperature Vulcanizing or Curing
- Type / Form: Grease, Paste
- Chemical System: Polyurethane
- Substrate Compatibility: Metal; Plastic
from Sherwin-Williams Protective & Marine Coatings
KEM ® Cati-Coat ® HS EPOXY FILLER/SEALER is a high performance, interior/exterior, VOC compliant, epoxy block filler. Designed for tenacious adhesion to masonry substrates while filling voids and crevices to smooth the surface. Excellent resistance to moisture, humidity, impact, and... [See More]
- Cure / Technology: Thermoset; Single Component
- Composition: Unfilled
- Chemical System: Epoxy
- Type / Form: Liquid
from Techsil Limited
Elecolit ® 3653 is a 1 component silver filled, solvent-free conductive epoxy adhesive used in applications which are subject to vibrations or quick temperature fluctuations. This unique product can be cured thermally in a very short period of time and cures to a 60 - 75 Shore D material. Silver... [See More]
- Cure / Technology: Thermoset
- Features: Electrically Conductive
- Chemical System: Epoxy
- Industry: Electronics
from Techsil Limited
Elecolit ® 414 is a single component silver-filled, electrically conductive coating substance that hardens into a flexible, chemical resistant, expandable, non-deformable and friction resistant film. Grey in colour, Elecolit ® 414 has a viscosity of 20,000 to 25,000 mPas and when used with... [See More]
- Cure / Technology: Thermoset
- Features: Electrically Conductive
- Chemical System: Epoxy
- Industry: Electronics
from Techsil Limited
Structalit ® 701 is a two part, thermal curing adhesive which offers great bonding to a wide range of materials including metals (aluminum, steel, stainless steel) and many plastics. With a long pot life and short curing time, 701 is a very easy adhesive to work with. It appears amber in color... [See More]
- Cure / Technology: Thermoset
- Chemical System: Epoxy
from Techsil Limited
TB2273D from ThreeBond is a thixotropic single component epoxy resin adhesive that has high temperature curing capabilities suitable for instant induction curing with HF-coils. After curing the hardened material has excellent electrical and mechanical properties such as good chemical resistance,... [See More]
- Cure / Technology: Thermoset
from Techsil Limited
ThreeBond 3114 is an epoxy resin based solvent- free ultraviolet-curing resin. Since the resin cures through optical cationic polymerization it is not inhibited from curing by oxygen, and it excels in surface curability. TB3114 cures to a free, fast setting anaerobic reactive pipe sealant compound. [See More]
- Cure / Technology: Thermoset; UV or Radiation Cured
- Chemical System: Epoxy