Specialty / Other Industrial Sealants
from Master Bond, Inc.
One part, nano silica filled UV22DC80-10F has the ability to cure in shadowed out areas. It features a UV and heat curing mechanism. Some noteworthy properties include optical clarity, excellent dimensional stability and outstanding physical strength. [See More]
- Composition: Filled
- Type / Form: Liquid
- Cure / Technology: UV or Radiation Cured; Single Component; Dual Curing
- Substrate Compatibility: Ceramic, Glass; Composites; Metal; Plastic; Porous Surfaces; Dissimilar Substrates
from RS Components, Ltd.
MG Total ground Carbon conduct coating [See More]
- Chemical System: Acrylic
- Industry: Electric Guitars, Electronic Instruments, Metal Detectors, Picture Tubes, RFI Shielding
- Type / Form: Liquid
- Use Temperature: -40 to 248
from Master Bond, Inc.
Master Bond UV26 is a one part UV curing system for bonding, coating and sealing. It features very low viscosity and high temperature resistance. [See More]
- Composition: Unfilled
- Type / Form: Liquid
- Cure / Technology: Thermoset; UV or Radiation Cured; Single Component
- Substrate Compatibility: Ceramic, Glass; Composites; Metal; Plastic; Porous Surfaces; Dissimilar Substrates
from RS Components, Ltd.
MG Total ground Carbon conduct coating [See More]
- Chemical System: Acrylic
- Use Temperature: -40 to 248
- Industry: Electric Guitars, Electronic Instruments, Metal Detectors, Picture Tubes, RFI Shielding
from Master Bond, Inc.
Master Bond UV10TK40M is a higher viscosity, one part UV system for bonding, sealing and coating with good optical clarity, excellent physical properties and a high glass transition temperature. [See More]
- Composition: Unfilled
- Type / Form: Liquid
- Cure / Technology: Thermoset; UV or Radiation Cured; Single Component; UV curing system
- Substrate Compatibility: Ceramic, Glass; Composites; Metal; Plastic; Porous Surfaces; Rubber or Elastomer; Dissimilar Substrates
from RS Components, Ltd.
MG Super Shield Nickel conduct coating [See More]
- Industry: Aerospace; Electronics; Aerospace, Antennas, Audio Equipment, Cable Boxes, Cellphones, Communication Devices, Consumer Electronics, Controllers, Drones & Other RC Vehicles
- Use Temperature: -40 to 248
from Master Bond, Inc.
Key Features. Stays in place when applied. Superb adhesive, sealant. Excellent physical strength properties. Enhanced toughness and durability. Product Description. Master Bond UV15-7TK1ANV-3 is a one component UV curable polymer system with a paste consistency for high performance bonding, sealing... [See More]
- Cure / Technology: UV or Radiation Cured; Single Component
- Substrate Compatibility: Ceramic, Glass; Metal; Plastic
- Type / Form: Grease, Paste
- Features: High Dielectric; Gap Filler, Foam in Place Gasket
from RS Components, Ltd.
MG Super Shield Nickel conduct coating [See More]
- Type / Form: Liquid
- Use Temperature: -40 to 248
- Industry: Aerospace; Electronics; Aerospace, Antennas, Audio Equipment, Cable Boxes, Cellphones, Communication Devices, Consumer Electronics, Controllers, Drones & Other RC Vehicles
from Master Bond, Inc.
Master Bond UV15RCL is a low viscosity, cationic type UV curing system with a special color changing feature. The originally red material changes to clear once exposed to UV light, indicating that there is UV light access across the adhesive material. [See More]
- Chemical System: Epoxy
- Cure / Technology: Thermoset; UV or Radiation Cured; Single Component
- Composition: Unfilled
- Substrate Compatibility: Ceramic, Glass; Composites; Metal; Plastic; Porous Surfaces; Rubber or Elastomer; Dissimilar Substrates
from RS Components, Ltd.
MG Super Shield Nickel conduct coating [See More]
- Industry: Aerospace; Electronics; Aerospace, Antennas, Audio Equipment, Cable Boxes, Cellphones, Communication Devices, Consumer Electronics, Controllers, Drones & Other RC Vehicles
- Use Temperature: -40 to 248
from Master Bond, Inc.
Key Features. Low viscosity. Strong adhesive. Excellent physical properties, enhanced durability and toughness. Low shrinkage upon cure. Product Description. Master Bond UV15-7NV-2 is a one component, UV curable polymer system for high performance bonding, sealing, coating and encapsulation. It has... [See More]
- Cure / Technology: UV or Radiation Cured; Single Component
- Substrate Compatibility: Ceramic, Glass; Metal; Plastic
- Type / Form: Liquid
- Features: High Dielectric; Thermal Insulation
from RS Components, Ltd.
MG Super Shield Silver coated copper [See More]
- Chemical System: Acrylic
- Industry: Aerospace; Electronics; Aerospace, Antennas, Audio Equipment, Cable Boxes, Cellphones, Communication Devices, Consumer Electronics, Controllers, Drones & Other RC Vehicles
- Type / Form: Liquid
- Use Temperature: -40 to 248
from Master Bond, Inc.
Master Bond UV15-7HP is a low viscosity, easy to apply, one-part, UV curable adhesive system with excellent strength properties. [See More]
- Composition: Unfilled
- Substrate Compatibility: Ceramic, Glass; Composites; Metal; Plastic; Porous Surfaces; Rubber or Elastomer; Dissimilar Substrates
- Cure / Technology: Thermoset; UV or Radiation Cured; Single Component
- Features: High Dielectric; Encapsulant, Potting Compound; Flexible; Leveling Filling; Gap Filler, Foam in Place Gasket
from RS Components, Ltd.
MG Super Shield Silver conduct coating [See More]
- Chemical System: Acrylic
- Use Temperature: -40 to 248
- Industry: Game Controllers, Keyboards, Mixing Boards, PCBs, Remote Controls
from RS Components, Ltd.
EMI 35, 200ml [See More]
- Cure / Technology: Thermoplastic / Hot Melt
- Industry: Electronic Prototypes, Measuring Instruments and Maintenance Equipment, Office Equipment
- Type / Form: Liquid
- Use Temperature: -40 to 203
from RS Components, Ltd.
Graphit 33, 200ml [See More]
- Type / Form: Liquid
- Use Temperature: 482 to 572
- Industry: Electronics; Electronics, PCBs
from RS Components, Ltd.
Urethan 71, 200ml [See More]
- Chemical System: Polyurethane
- Industry: Electronics; Electronics, PCBs
- Type / Form: Liquid
- Use Temperature: 248
from RS Components, Ltd.
Plastik 70 super, 400ml [See More]
- Chemical System: Acrylic
- Industry: Insulating and protective lacquer of printed circuit boards and electrical components
- Type / Form: Liquid
- Use Temperature: -40 to 257
from ACCRAbond, Inc.
CONATHANE ® FP-1301 is an unfilled two-component urethane system designed for use as a sealant. [See More]
- Cure / Technology: Two Component
from Sherwin-Williams Protective & Marine Coatings
CoroBond ™ CONDUCTIVE VINYL ESTER PRIMER is a conductive, elastomer modified epoxy vinyl ester. It is designed to provide superior adhesion to concrete and metal substrates, and resist mechanical stresses such as impact, abrasion, tensile and flexural stress. Excellent chemical resistance. [See More]
- Chemical System: Epoxy; Alkyd; Vinyl
- Cure / Technology: Air Setting / Film Drying; Thermoset; Single Component
- Composition: Unfilled
- Type / Form: Liquid
from 3M Aerospace and Aircraft Maintenance Division
3M ™ Edge Sealer ES2000 is a two-part edge sealer. It is a clear, non-yellowing and UV stable, durable sealer system having excellent resistance to environmental and ultra-violet (UV) exposure. [See More]
- Cure / Technology: Two Component ; Room Temperature Vulcanizing or Curing
- Substrate Compatibility: Paints, Primers, and Films
- Type / Form: Grease, Paste
- Industry: Aerospace; OEM or Industrial
from Owens Corning® FOAMGLAS® Insulation
A high performance, MS polymer-based sealant that is specifically formulated for FOAMGLAS ® insulation systems in chilled water service. PITTSEAL ®CW sealant offers the advantages of both silicone and polyurethane sealants in one product, without the disadvantages of either. It is UV... [See More]
- Industry: Insulation Systems
- Tensile (Break): 225
- Use Temperature: -75 to 250
- Elongation: 450.0 to 500.0
from GAF
EverGuard ® Water Block. Description. One-part butyl-based high-viscosity sealant. Benefit/Application. Suitable for sealing between flashing membrane and substrate surface behind exposed termination bars. Suitable for sealing between roofing membrane and drain flanges [See More]
- Cure / Technology: Two Component
- Substrate Compatibility: Plastic
- Type / Form: Liquid
- Industry: Construction
from Chemence Inc.
Krylex KT722 is a high strength, high viscosity, high service temperature, anaerobic thread locker. KT722 cures when confined in the absence of air between close-fitting metal surfaces. KT722 is formulated to lock all metric and imperial nuts and bolts, preventing vibration loosening and leakage... [See More]
- Cure / Technology: Anaerobic; Two Component (optional feature); Single Component
- Substrate Compatibility: Metal
- Type / Form: Liquid
- Features: Gap Filler, Foam in Place Gasket; Threadlocker or Retainer
from Acoustical Solutions, Inc.
Acoustical Caulk is a non-flammable, latex based sealant specially designed for the reduction of sound transmission and drafts in all types of wall systems. Acoustical Caulk remains flexible and adheres firmly to wood, metal studs, concrete, gypsum board and most other building materials. Acoustical... [See More]
- Chemical System: Elastomeric
- Type / Form: Grease, Paste
- Cure / Technology: Thermoset; Single Component
- Substrate Compatibility: Concrete, Masonry; Metal; Paper or Paperboard; Wood; Dissimilar Substrates; Gypsum Board
from Shiu Li Technology Co., Ltd
LiPOLY G566 Graphite Sheet has great thermal conductivity on the X and Y axis. The thermal conductivity is 1700W/m*K. It is flexible, which is suitable for thin products and high capability mobile devices. [See More]
- Type / Form: Sheet or Film
- Industry: Electronics
- Features: Thermally Conductive
- Gap Fill: 8.27E-4
from Protavic America, Inc.
Fast flow, fast cure capillary reworkable underfill. The rheology of the PROTAVIC ANA 10199 R in combination with its fineness make the product perfectly adapted to high reliability small gap underfill applications. It presents a good pot life at room temperature 20-22C and a high reactivity at... [See More]
- Composition: Unfilled
- Type / Form: Liquid
- Cure / Technology: Thermoset; Single Component
- Features: High Dielectric; Gap Filler, Foam in Place Gasket; Thermal Insulation
from DME Company
Resists Corrosion, Leakage and Loosening From Vibration and Moisture. Anaerobic Sealant Chemically Cures In The Absence of Air. Use From -65 ˚F To +350 ˚F. Allows Final Adjustments Up To 24 Hours After Application. Use For Hydraulics, Pneumatics, Process Piping or Steam. Locks And Seals... [See More]
- Cure / Technology: Anaerobic
- Substrate Compatibility: Metal; Dissimilar Substrates
- Type / Form: Grease, Paste
- Features: Threadlocker or Retainer
from Phelps Industrial Products
A radically different form of PTFE fluorocarbon material, although very strong and tough, it is soft and "marshmallowy" in character, permitting it to conform easily to irregular surfaces and to compress to a thin, wide ribbon under pressure. Because it is 100% PTFE fluorocarbon, it can be used in... [See More]
- Features: Non-corrosive; Gap Filler, Foam in Place Gasket
- Use Temperature: -450 to 600
- Industry: OEM or Industrial
from Titebond
Titebond Gutter & Seam Sealant provides a highly weather-resistant seal against water, wind, dust and dirt. This long-lasting advanced polymer sealant retains resiliency and flexibility for years. Gutter & Seam Sealant was formulated specifically for sealing aluminum, galvanized and vinyl clad... [See More]
- Viscosity: 450000
from Sauereisen, Inc.
Sauereisen InstaPlug No. F-180 is a rapid setting, hydraulic water plug for sealing active water leaks, filling small voids and special anchoring applications. Typical industry applications are: eliminating water leakage in below grade concrete and masonry structures, manhole rehabilitation, and... [See More]
- Chemical System: Ceramic
- Cure / Technology: Air Setting / Film Drying; Single Component
- Composition: Unfilled
- Type / Form: Powder
from 3M Aerospace and Aircraft Maintenance Division
Fast-Drying, Fire Retardant. Apply Over Movable Part. Tampering with Part can be Detected by Break in Sealant. [See More]
- Chemical System: Phenolic
- Type / Form: Liquid
- Cure / Technology: Air Setting / Film Drying; Single Component
- Substrate Compatibility: Metal
from Chemence Inc.
KG105 is a single component, thixotropic, low-medium strength, high temperature anaerobic gasket compound. KG105 cures rapidly when confined in the absence of air on close-fitting metal surfaces. KG105 will give an almost instant low-pressure seal (up to 0.5 Bar after 20 mins.) to allow on-line... [See More]
- Cure / Technology: Anaerobic; Two Component (optional feature); Single Component
- Substrate Compatibility: Metal
- Type / Form: Grease, Paste
- Features: Gap Filler, Foam in Place Gasket
from Shiu Li Technology Co., Ltd
LiPOLY TR332CU has outstanding parallel thermal conduction and has high flexibility, which is suitable for thin products like mobile devices. [See More]
- Type / Form: Sheet or Film
- Industry: Electronics
- Features: Thermally Conductive
- Gap Fill: 0.0039 to 0.0059
from Phelps Industrial Products
A universal gasket made from 100% expanded PTFE. Although very strong and tough, it is soft and "marshmallowy" in character, permitting it to conform easily to irregular surfaces and to compress to a thin, wide ribbon under pressure. It comes in the form of a continuous cord with an adhesive bead to... [See More]
- Features: Non-corrosive; Gap Filler, Foam in Place Gasket
- Use Temperature: -450 to 600
- Industry: Sanitary; OEM or Industrial
from Titebond
Titebond Roof Cement is an all-weather, asphalt based patching compound specifically designed and formulated to repair cracks, seams, gaps and holes in roofing materials. This sealant is ideal for repair and new-construction roofing applications. Use Titebond Roof Cement to set flashings, drip edges... [See More]
- Viscosity: 150000
from Shiu Li Technology Co., Ltd
LiPOLY Non-Silicone Thermal Compound N700A/B is made of non-silicon resin material and none low-molecular-weight siloxane. N700A/B helps avoid electrical contact problems. N700 is flexible and has great thermal conduction, making the thermal resistance as low as possible. The thermal conductivity is... [See More]
- Type / Form: Sheet or Film
- Industry: Electronics
- Features: Thermally Conductive; UL Rating
- Gap Fill: 0.0197 to 0.1969
from Titebond
Titebond Self-Leveling Concrete Floor Joint Sealant is a one-component, self-leveling, premium grade, high performance advanced polymer sealant which is specifically engineered for contraction/expansion joints and cracks in concrete decks and floors. Self-Leveling Concrete Floor Joint Sealant is... [See More]
- Viscosity: 110000
from Shiu Li Technology Co., Ltd
Non-Silicone Thermal Compound N700C is made of non-silicon resin material and none low-molecular-weight siloxane. N700C helps avoid electrical contact problems. N700 is flexible and has great thermal conduction, making the thermal resistance as low as possible. The thermal conductivity is 5.0W/m*K. [See More]
- Type / Form: Sheet or Film
- Industry: Electronics
- Features: Thermally Conductive
- Gap Fill: 0.0197 to 0.1969
from Titebond
Titebond WeatherMaster Metal Roof Sealant is specifically formulated to outperform all other sealant technologies, including silicones, tri-polymers, and polyurethanes. This superior polymer formula provides a waterproof seal against water, wind, dust and dirt. It offers exceptional adhesion to... [See More]
- Viscosity: 500000
from Shiu Li Technology Co., Ltd
Non-Silicone Thermal Compound N800AH is made of non-silicon resin material and none low-molecular-weight siloxane. N800AH helps avoid electrical contact problems. N800 is flexible and has great thermal conduction, making the thermal resistance as low as possible. The thermal conductivity is... [See More]
- Type / Form: Sheet or Film
- Industry: Electronics
- Features: Thermally Conductive
- Gap Fill: 0.0197 to 0.1969
from Titebond
Titebond WeatherMaster Sealant has been specifically formulated to outperform all other sealant technologies, including silicones and urethanes. This superior polymer formula provides the best possible performance on siding, windows, doors and vents. In addition to offering exceptional flexibility,... [See More]
- Viscosity: 500000
from Shiu Li Technology Co., Ltd
Non-Silicone Thermal Compound N800C-s is made of non-silicon resin material. No low molecular siloxane volatilization and low total volatile gas, no electrical contact & pollution problems. N800C-s can have low thermal resistance and high thermal conductivity. [See More]
- Type / Form: Sheet or Film
- Industry: Aerospace; Automotive; Electronics; Electric Power; OEM or Industrial
- Features: Thermally Conductive
- Gap Fill: 0.0197 to 0.1969
from Shiu Li Technology Co., Ltd
LiPOLY N-putty series is silicone-free and dispensable thermally conductive material. With a thermal conductivity from 3.5 W/m*K, this product can be used successfully to remove manufacturing tolerances. It is ideally suited for dispensing using the N-putty dispensing robot. [See More]
- Features: Thermally Conductive
- Viscosity: 15000
- Industry: Electronics
- Use Temperature: -76 to 302
from Shiu Li Technology Co., Ltd
LiPOLY N-putty2-s series is a non-silicon thermally conductive material without volatilization of low molecular siloxane, and low total volatile gas. With a thermal conductivity of 5.0 W/m*K, the high deformation can perfectly fill small air gaps to eliminate tolerances. It also can overcome... [See More]
- Features: Thermally Conductive
- Viscosity: 1.50E7
- Industry: Aerospace; Automotive; Electronics; Electric Power; OEM or Industrial
- Use Temperature: -76 to 302
from Shiu Li Technology Co., Ltd
LiPOLY's NL-putty series is a silicone free, low-density gel filling material. Its low density and lightweight characteristics enhance product performance, reduce production costs. Commonly used in electronic products and automotive electronic devices, this series has a thermal conductivity of... [See More]
- Type / Form: Gel; Liquid
- Industry: Aerospace; Automotive; Electronics; Electric Power; Military; OEM or Industrial
- Features: Gap Filler, Foam in Place Gasket; Thermally Conductive
- Viscosity: 2.50E6