Medical / Food (Sanitary / FDA) Industrial Sealants
from Ellsworth Adhesives
Henkel Loctite 4902 Flexible Cyanoacrylate Adhesive Clear is used for the assembly of flexible medical devices and bonding to substrates such as metal, plastic, and rubber. It has excellent sealing properties, fast humidity cure, and high strength flexing bond lines. It also meets ISO 10993... [See More]
- Industry: Sanitary
- Cure / Technology: Single Component
- Chemical System: Cyanoacrylate
- Substrate Compatibility: Metal; Plastic; Rubber or Elastomer
from Master Bond, Inc.
UV17Med is a low viscosity, UV curable system with an affinity for bonding to a wide array of thermoplastic urethanes and passes stringent ISO10993-5 cytotoxicity standards. [See More]
- Industry: Aerospace; Electronics; Sanitary; Photonics; OEM or Industrial
- Cure / Technology: UV or Radiation Cured; Single Component
- Composition: Unfilled
- Substrate Compatibility: Ceramic, Glass; Composites; Metal; Plastic; Porous Surfaces; Rubber or Elastomer; Dissimilar Substrates
from Master Bond, Inc.
EP40Med is a two component, room temperature curing epoxy with high elongation that passes ISO 10993-5 for cytotoxicity. It features exceptional adhesion to polycarbonates and acrylics. [See More]
- Industry: Electronics; Sanitary; OEM or Industrial
- Composition: Unfilled
- Chemical System: Epoxy
- Cure / Technology: Thermoset; Two Component ; Room Temperature Vulcanizing or Curing
from Master Bond, Inc.
Passing both USP Class VI testing and ISO cytotoxicity specifications, MasterSil 910Med is formulated for bonding, sealing, coating in medical device applications. As an acetoxy type system, it bonds exceptionally well to a wide variety of substrates including metals, composites, ceramics, glass as... [See More]
- Industry: Aerospace; Automotive; Electronics; Electric Power; Marine; Sanitary; OEM or Industrial; Semiconductors, IC's; Tooling
- Composition: Unfilled
- Chemical System: Silicone
- Cure / Technology: Thermoset; Single Component
from Master Bond, Inc.
Master Bond Polymer System EP45HTMed is a two component heat cured epoxy system for high performance structural bonding, sealing, coating and casting. It is especially designed for the assembly of reusable medical devices which must be sterilized repeatedly by radiation, sterilant and steam... [See More]
- Industry: Aerospace; Automotive; Electronics; Electric Power; Marine; Sanitary; OEM or Industrial; Semiconductors, IC's; Tooling
- Composition: Unfilled
- Chemical System: Epoxy
- Cure / Technology: Thermoset; Two Component
from Master Bond, Inc.
Master Bond Polymer System EP21HT is a two component, room temperature curing epoxy adhesive, sealant and coating featuring a forgiving 1 to 1 mix ratio and high temperature resistance up to 400 °F. EP21HT produces high strength, durable bonds that hold up well to thermal cycling and resist many... [See More]
- Industry: Aerospace; Automotive; Electronics; Electric Power; Laminaes; Marine; Sanitary; Military; OEM or Industrial; Semiconductors, IC's; Tooling
- Cure / Technology: Thermoset; Two Component
- Chemical System: Epoxy
- Type / Form: Liquid
from Master Bond, Inc.
Master Bond Polymer Adhesive EP30HT is a medium viscosity, two component epoxy adhesive for general purpose bonding formulated to cure at room temperature or more rapidly at elevated temperatures, with a four (4) to one (1) mix ratio by weight. This adhesive is 100% reactive and does not contain any... [See More]
- Industry: Aerospace; Automotive; Electronics; Electric Power; Laminaes; Marine; Sanitary; Optical; OEM or Industrial; Semiconductors, IC's; Tooling
- Cure / Technology: Thermoset; Two Component
- Chemical System: Epoxy
- Type / Form: Liquid
from Master Bond, Inc.
UV10TKMed is USP Class VI approved and meets ISO10993-5 for cytotoxicity requirements. It is used in the assembly of medical devices and is capable of withstanding repeated sterilizations, including radiation, ethylene oxide, chemical sterilants and especially autoclaving. This higher viscosity, one... [See More]
- Industry: Aerospace; Automotive; Electronics; Electric Power; Marine; Sanitary; OEM or Industrial; Semiconductors, IC's; Tooling
- Composition: Unfilled
- Chemical System: Epoxy
- Cure / Technology: Thermoset; UV or Radiation Cured; Single Component
from Master Bond, Inc.
Master Bond EP4G-80Med is a one part epoxy designed for use in the assembly of medical devices. This system is formulated with a non-metallic, graphite filler, which leads to good thermal and electrical conductivity. [See More]
- Industry: Electronics; Sanitary; OEM or Industrial
- Composition: Filled
- Chemical System: Epoxy
- Cure / Technology: Thermoset; Single Component
from Master Bond, Inc.
Formulated for medical electronic applications, Master Bond EP62-1LPSPMed is a biocompatible two part epoxy that has a an ultra low viscosity. This makes it makes it ideal for use in underfill, impregnation and porosity sealing applications, while it also performs well in bonding, coating or... [See More]
- Industry: Electronics; Sanitary; Photonics; Semiconductors, IC's
- Composition: Unfilled
- Chemical System: Epoxy
- Cure / Technology: Thermoset; Two Component
from Sherwin-Williams Protective & Marine Coatings
ArmorSeal ®5020 EPOXY FLOOR RESURFACER is a trowelable epoxy surfacing and leveling compound for new and old floors of concrete, wood, or steel where a high degree of chemical and abrasion resistance is required. The physical properties of ArmorSeal ®5020 are much higher than those of... [See More]
- Industry: Electric Power; Marine; Sanitary; OEM or Industrial; Pharmaceutical Houses
- Composition: Unfilled
- Chemical System: Epoxy
- Cure / Technology: Thermoset; Single Component
from Henkel Corporation - Industrial
Flowable liquid sealant with light cure capability, UV and visible, combined with a secondary neutral moisture cure mechanism for shadow curing. LOCTITE ® SI 5240 is a clear yellow to green tint (possibly hazy) flowable liquid sealant with light cure capability, UV and visible, combined with a... [See More]
- Industry: Sanitary
- Cure / Technology: UV or Radiation Cured; Single Component
- Chemical System: Silicone
- Type / Form: Liquid
from Wacker Chemical Corp.
ELASTOSIL ® E60 is a flowable one-component silicone rubber, which cures at room temperature under the influence of atmospheric moisture. Special features. acetic acid-curing system. flowable. excellent heat stability. excellent primerless adhesion to many substrates. Application. Coating for... [See More]
- Industry: Sanitary
- Cure / Technology: Thermoset; Single Component; Reactive or Moisture Cured; Room Temperature Vulcanizing or Curing
- Chemical System: Silicone; Elastomeric
- Type / Form: Liquid
from Sauereisen, Inc.
Sauereisen Aguapoxy No. 28 is a three component, water cleanable, general purpose epoxy grout for bonding chemical resistant masonry units. The No. 28, combined with brick or tile, offers rapid installation and clean up with potable water. The water cleanable feature of Aguapoxy No. 28 is designed... [See More]
- Industry: Sanitary; Construction
- Cure / Technology: Two Component
- Chemical System: Epoxy
- Type / Form: Liquid; Powder
from Epoxy Technology
EPO-TEK ® medical grade (or biocompatible) epoxy adhesives are used extensively throughout the healthcare and biotech industries. Device manufacturers making cardiac, ophthalmic, skeletal and neurological implants rely on our adhesives for protection, while the endoscopy camera market... [See More]
- Industry: Sanitary; Optical; Photonics
- Cure / Technology: Thermoset; Two Component ; Room Temperature Vulcanizing or Curing
- Chemical System: Epoxy
- Type / Form: Liquid
from Techsil Limited
Momentive RTV102 is a versatile, ready to use adhesive sealant which cures to a tough, durable resilient silicone rubber. Uncured, this general purpose sealant has a paste consistency which can be applied to vertical and overhead surfaces where pourable/self- levelling sealants are not practical. [See More]
- Industry: Sanitary
- Use Temperature: -60 to 204
- Chemical System: Silicone; Elastomeric
from Hapco, Inc.
Filter-bond ™ is a series of casting and potting compounds ideally suited for potting, sealing, and bonding filtration and ultrafiltration products. The Filter-bond ™ E-Series is manufactured to ultra-high quality standards and has been used by customers to pass FDA approval. Filter-bond... [See More]
- Industry: Sanitary
- Cure / Technology: Two Component
- Chemical System: Elastomeric; Polyurethane
- Type / Form: Liquid
from Phelps Industrial Products
A universal gasket made from 100% expanded PTFE. Although very strong and tough, it is soft and "marshmallowy" in character, permitting it to conform easily to irregular surfaces and to compress to a thin, wide ribbon under pressure. It comes in the form of a continuous cord with an adhesive bead to... [See More]
- Industry: Sanitary; OEM or Industrial
- Use Temperature: -450 to 600
- Features: Non-corrosive; Gap Filler, Foam in Place Gasket
from Sherwin-Williams Protective & Marine Coatings
HEAVY DUTY BLOCK FILLER is a pure acrylic resin block filler for use on interior and exterior poured and precast concrete, concrete block, and cinder block. Excellent moisture resistance. Excellent filling characteristics. Suitable for use in USDA inspected facilities. Resurface spalled and... [See More]
- Industry: Sanitary; OEM or Industrial; Power Plants, Dairies, Schools
- Composition: Unfilled
- Chemical System: Acrylic
- Cure / Technology: Thermoset; Single Component
from Techsil Limited
Momentive RTV103 is a versatile, ready to use adhesive sealant which cures to a tough, durable resilient silicone rubber. Uncured, this general purpose sealant has a paste consistency which can be applied to vertical and overhead surfaces where pourable/self- levelling sealants are not practical. [See More]
- Industry: Sanitary
- Use Temperature: -60 to 204
- Chemical System: Silicone; Elastomeric
from Hapco, Inc.
Elastomeric Series. Various hardness elastomers, shore 20A - 72D. Clear in color. Available in 2 speeds - fast and slow. STERalloy FDG is the first Liquid Molding Polymer Alloy Series that has been specifically designed for food and drug applications. All of the products in the STERalloy FDG Series... [See More]
- Industry: Sanitary; Tooling
- Composition: Unfilled
- Chemical System: Elastomeric; Polyurethane
- Cure / Technology: Two Component
from Sherwin-Williams Protective & Marine Coatings
Cement-Plexl ® 875 is a heavy duty, interior/exterior, VOC compliant, two component, cementitious, acrylic, waterborne block filler, which accepts both conventional and high performance topcoats. When topcoated, this product provides an excellent coating system for moderate service environments... [See More]
- Industry: Marine; Sanitary; Construction; OEM or Industrial; Food & Beverage Plants, Schools
- Composition: Unfilled
- Chemical System: Ceramic; Acrylic
- Cure / Technology: Thermoset; Two Component
from Techsil Limited
Momentive RTV108 is a versatile, ready to use adhesive sealant which cures to a tough, durable resilient silicone rubber. Uncured, this general purpose sealant has a paste consistency which can be applied to vertical and overhead surfaces where pourable/self- levelling sealants are not practical. [See More]
- Industry: Sanitary
- Use Temperature: -60 to 204
- Chemical System: Silicone; Elastomeric
from Hapco, Inc.
Rigid Series. Rigid, tough polymer alloy plastics. High heat distortion. High physical properties. STERalloy FDG is the first Liquid Molding Polymer Alloy Series that has been specifically designed for food and drug applications. All of the products in the STERalloy FDG Series exhibit unique... [See More]
- Industry: Sanitary; Tooling
- Composition: Unfilled
- Chemical System: Polyurethane
- Cure / Technology: Two Component
from Techsil Limited
Momentive RTV108 is a versatile, ready to use adhesive sealant which cures to a tough, durable resilient silicone rubber. Uncured, this general purpose sealant has a paste consistency which can be applied to vertical and overhead surfaces where pourable/self- levelling sealants are not practical. [See More]
- Industry: Sanitary
- Use Temperature: -60 to 204
- Chemical System: Silicone; Elastomeric
from Techsil Limited
DETAILS. Momentive RTV109 is a versatile, ready to use adhesive sealant which cures to a tough, durable resilient silicone rubber. Uncured, this general purpose sealant has a paste consistency which can be applied to vertical and overhead surfaces where pourable/self- levelling sealants are not... [See More]
- Industry: Sanitary
- Use Temperature: -60 to 204
- Chemical System: Silicone; Elastomeric
from Techsil Limited
Momentive RTV116 is a versatile, ready to use adhesive sealant which cures to a tough, durable resilient silicone rubber. Uncured, this high temperature general purpose sealant has a self levelling consistency which is ideal for use to flow in to small crevices and hard to reach places. RTV116 will... [See More]
- Industry: Sanitary
- Use Temperature: -60 to 260
- Chemical System: Silicone; Elastomeric
from Techsil Limited
Momentive RTV116 is a versatile, ready to use adhesive sealant which cures to a tough, durable resilient silicone rubber. Uncured, this high temperature general purpose sealant has a self levelling consistency which is ideal for use to flow in to small crevices and hard to reach places. RTV116 will... [See More]
- Industry: Sanitary
- Use Temperature: -60 to 260
- Chemical System: Silicone; Elastomeric