Aerosol Industrial Coatings
from FORREST Technical Coatings
A fast-drying universal phenolic modified alkyd primer with non-lifting properties. Rust-inhibitive pigments provide excellent corrosion prevention and good weathering characteristics for protection during storage, transit or construction. Appropriate for use on interior or exterior steel substrates... [See More]
- Form: Aerosol; Liquid; Solvent
- Chemistry: Alkyd; Resin; Formaldehyde Resins (Phenolic, Furan, Melamine)
- Type: Coating; Primer; Base Coat; Paint
- Substrate: Metallic; Steel
from RS Components, Ltd.
Silver/copper shielding aerosol,400ml [See More]
- Form: Aerosol
- Type: Coating
from FORREST Technical Coatings
FORREST Industrial Enamels are easy to apply industrial coatings in low-VOC, HAPS compliant, water-based, quick-dry, and solvent-based formulations. All are available as single-component finishes for interior or exterior use. Available in aerosols for touch-up and industrial maintenance. [See More]
- Form: Aerosol; Liquid; Solvent
- Chemistry: Alkyd; Resin
- Type: Coating; Clear Coat; Paint
- Substrate: Metallic; Steel
from RS Components, Ltd.
LAQUE BOMBE RAL7032-400ML [See More]
- Form: Aerosol
- Type: Coating
from FORREST Technical Coatings
A one-coat alkyd enamel solution for where two-coat primer and topcoat systems are typically used. Available in aerosols for touch-up and maintenance. Matches the performance of 14E with the addition of a corrosion inhibitor. [See More]
- Form: Aerosol; Liquid; Solvent
- Chemistry: Alkyd; Resin
- Type: Coating; Enamel; Paint
- Substrate: Metallic; Steel
from FORREST Technical Coatings
Premium Acrylic Modified Alkyd Enamel with excellent color and gloss retention. May be catalyzed with 46K001 for enhanced performance. Available in aerosols for touch-up and maintenance. [See More]
- Form: Aerosol; Liquid; Solvent
- Chemistry: Alkyd; Resin
- Type: Coating; Enamel; Clear Coat; Paint
- Substrate: Metallic; Steel
from FORREST Technical Coatings
Our quickest-dry high-gloss alkyd enamel designed for use on metal surfaces. Excellent for marking safety equipment, safety hazards and piping to comply with OSHA color standards. Multiple stocked bases allow for tinting on demand. May be used direct-to-metal or with a primer depending on... [See More]
- Form: Aerosol; Liquid; Solvent
- Chemistry: Alkyd; Resin
- Type: Coating; Enamel; Clear Coat; Paint
- Substrate: Metallic; Steel
from FORREST Technical Coatings
Quixnamel Alkyd Enamel is a proven versatile gloss enamel for use on substrates with interior or exterior exposure. Provides a durable and attractive finish for all types of industrial and agricultural equipment. Excellent application properties and quick dry to increase production. May be used... [See More]
- Form: Aerosol; Liquid; Solvent
- Chemistry: Alkyd; Resin
- Type: Coating; Enamel; Clear Coat; Paint
- Substrate: Metallic; Steel
from FORREST Technical Coatings
Stove Bright ® 1A62H290 Satin Black is a high heat coating formulated with a unique blend of heat resistant pigments in a silicone polymer resin that provides excellent color retention and film integrity in working temperature up to 1200 °F (650 °C). This coating is designed for rapid... [See More]
- Form: Aerosol; Solvent
- Chemistry: Resin; Silicone
- Type: Coating; Paint
- Substrate: Aluminum; Concrete; Metallic; Steel; Other
from FORREST Technical Coatings
Stove Bright ® 1A62H059 Metallic Brown is a high heat coating formulated with a unique blend of heat resistant pigments in a silicone polymer resin that provides excellent color retention and film integrity in working temperature up to 1200 °F (650 °C). This coating is designed for... [See More]
- Form: Aerosol; Solvent
- Chemistry: Resin; Silicone
- Type: Coating; Paint
- Substrate: Aluminum; Concrete; Metallic; Steel; Other
from FORREST Technical Coatings
Stove Bright ® 1A52H494 Sky Blue is a high heat coating formulated with a unique blend of heat resistant pigments in a silicone polymer resin that provides excellent color retention and film integrity in working temperature up to 1200 °F (650 °C). This coating is designed for rapid... [See More]
- Form: Aerosol; Solvent
- Chemistry: Resin; Silicone
- Type: Coating; Paint
- Substrate: Aluminum; Concrete; Metallic; Steel; Other
from FORREST Technical Coatings
Stove Bright ® 1A52H700 Forest Green is a high heat coating formulated with a unique blend of heat resistant pigments in a silicone polymer resin that provides excellent color retention and film integrity in working temperature up to 1200 °F (650 °C). This coating is designed for... [See More]
- Form: Aerosol; Solvent
- Chemistry: Resin; Silicone
- Type: Coating; Paint
- Substrate: Aluminum; Concrete; Metallic; Steel; Other
from FORREST Technical Coatings
Stove Bright ® 1A62H201 Charcoal is a high heat coating formulated with a unique blend of heat resistant pigments in a silicone polymer resin that provides excellent color retention and film integrity in working temperature up to 1200 °F (650 °C). This coating is designed for rapid... [See More]
- Form: Aerosol; Solvent
- Chemistry: Resin; Silicone
- Type: Coating; Paint
- Substrate: Aluminum; Concrete; Metallic; Steel; Other
from FORREST Technical Coatings
Stove Bright ® 1A62H830 Goldenfire Brown is a high heat coating formulated with a unique blend of heat resistant pigments in a silicone polymer resin that provides excellent color retention and film integrity in working temperature up to 1200 °F (650 °C). This coating is designed for... [See More]
- Form: Aerosol; Solvent
- Chemistry: Resin; Silicone
- Type: Coating; Paint
- Substrate: Aluminum; Concrete; Metallic; Steel; Other
from FORREST Technical Coatings
Stove Bright ® 1A51H030 Silver is a high heat coating formulated with a unique blend of heat resistant pigments in a silicone polymer resin that provides excellent color retention and film integrity in working temperature up to 1200 °F (650 °C). This coating is designed for rapid... [See More]
- Form: Aerosol; Solvent
- Chemistry: Resin; Silicone
- Type: Coating; Paint
- Substrate: Aluminum; Concrete; Metallic; Steel; Other
from FORREST Technical Coatings
Stove Bright ® 1A52H068 Gold is a high heat coating formulated with a unique blend of heat resistant pigments in a silicone polymer resin that provides excellent color retention and film integrity in working temperature up to 1200 °F (650 °C). This coating is designed for rapid curing... [See More]
- Form: Aerosol; Solvent
- Chemistry: Resin; Silicone
- Type: Coating; Paint
- Substrate: Aluminum; Concrete; Metallic; Steel; Other
from FORREST Technical Coatings
Stove Bright ® 1A51H200 Flat Black is a high heat coating formulated with a unique blend of heat resistant pigments in a silicone polymer resin that provides excellent color retention and film integrity in working temperature up to 1200 °F (650 °C). This coating is designed for rapid... [See More]
- Form: Aerosol; Solvent
- Chemistry: Resin; Silicone
- Type: Coating; Paint
- Substrate: Aluminum; Concrete; Metallic; Steel; Other
from FORREST Technical Coatings
Stove Bright ® 1A54H050 Primer is a high heat coating formulated with a unique blend of heat resistant pigments in a silicone polymer resin that provides excellent color retention and film integrity in working temperature up to 1200 °F (650 °C). This coating is designed for rapid... [See More]
- Form: Aerosol; Solvent
- Chemistry: Resin; Silicone
- Type: Coating; Paint
- Substrate: Aluminum; Concrete; Metallic; Steel; Other
from FORREST Technical Coatings
Stove Bright ® 1A62H209 Metallic Black is a high heat coating formulated with a unique blend of heat resistant pigments in a silicone polymer resin that provides excellent color retention and film integrity in working temperature up to 1200 °F (650 °C). This coating is designed for... [See More]
- Form: Aerosol; Solvent
- Chemistry: Resin; Silicone
- Type: Coating; Paint
- Substrate: Aluminum; Concrete; Metallic; Steel; Other
from FORREST Technical Coatings
Stove Bright ® 1A52H050 Copper is a high heat coating formulated with a unique blend of heat resistant pigments in a silicone polymer resin that provides excellent color retention and film integrity in working temperature up to 1200 °F (650 °C). This coating is designed for rapid... [See More]
- Form: Aerosol; Solvent
- Chemistry: Resin; Silicone
- Type: Coating; Paint
- Substrate: Aluminum; Concrete; Metallic; Steel; Other
from FORREST Technical Coatings
Stove Bright High Temperature Paint is an aerosols are available at thousands of retail locations across the United States. Easy spray application on properly prepared metal substrate gives a long-lasting finish that can withstand peak temperatures to 1200 °F (650 °C). Stove Bright High... [See More]
- Form: Aerosol; Solvent
- Chemistry: Resin; Silicone
- Type: Coating; Paint
- Substrate: Aluminum; Concrete; Metallic; Steel; Other
from FORREST Technical Coatings
Stove Bright ® 1A53H001 Clear is a Medium-High heat coating formulated with a unique blend of heat resistant pigments in a silicone polymer resin that provides excellent color retention and film integrity in working temperature up to 500 °F (238 °C). This coating is designed for rapid... [See More]
- Form: Aerosol; Solvent
- Chemistry: Resin; Silicone
- Type: Coating; Paint
- Substrate: Aluminum; Concrete; Metallic; Steel; Other
from Aervoe Industries Incorporated
Neutralizes static electricity, inhibits airborne dust accumulation [See More]
- Form: Aerosol
- Chemistry: Fatty Alcohol Phosphate
- Type: Coating
- Substrate: Aluminum; Metallic; Plastic; Other; Tile, Foils, Cellophane
from Dampney Company, Inc.
Formulated to beautify, extend the life, and preserve the appearance [See More]
- Form: Aerosol; Liquid
- Chemistry: Acrylic; Resin; Acrylic Polymer and Copolymer
- Type: Stain
- Substrate: Concrete
from Chemical Strategies, Inc.
Chemical Strategies offers all Krylon products. If you are unable to locate a paint or coating you need, our sales department can custom source any needed materials for you directly. [See More]
- Form: Aerosol
- Chemistry: Acrylic; Aluminum; Resin; Metal Filled
- Type: Enamel; Paint
from R. S. Hughes Company, Inc.
3M 05917 corrosion inhibitor comes in gray and is packaged 12.75 per inner, 6 per case. Designed to have corrosion-inhibitor properties based on the zinc formulation. This corrosion inhibitor meets the following standards: ASTM B 117. [See More]
- Form: Aerosol
- Dispensing Method: Sprayable
- Type: Coating
- Features: Corrosion Resistant
from Chase Products Co.
Champion Sprayon ® Anti-Fog Plexiglass Cleaner makes cleaning easier and faster. Leaves a protective coating that repels dirt, dust, finger smudges, scratches and water spots. Contains no abrasives, silicones or ammonia. Foaming plexiglass cleaner and protectant. Does not contain ammonia,... [See More]
- Form: Aerosol
- Substrate: Other; Plexiglass
- Type: Coating
- Dispensing Method: Sprayable
from Sherwin-Williams
Paint & Coatings. A wide variety of coatings for residential or commercial use offer top quality performance. Primers. Exterior primers assure superior hiding, topcoat appearance and long-lasting results. Commercial High-Performance Coatings. A comprehensive line-up of high-performance coatings... [See More]
- Form: Aerosol; Liquid
- Chemistry: Acrylic; Alkyd; Resin
- Type: Coating; Enamel; Primer; Base Coat; Clear Coat; Paint; Sealer; Stain
- Substrate: Concrete; Metallic; Plastic; Wood
from IBT Industrial Solutions
Since 1949, IBT Industrial Solutions has been a major supplier to manufacturers, offering reliable products and services in the broad industrial marketplace. We are dedicated to fully meeting your demands for industrial tools and products of the highest quality from the brands you know and trust,... [See More]
- Form: Aerosol
- Chemistry: Epoxy; Polyurethane; Resin
- Type: Coating; Paint
from Valspar Corporation (The)
Since 1915, Guardsman has been a leader in caring for wood furniture. We started out making wood finishes for fine furniture, and created our wood care products to show off those finishes to their best advantage. Today, we offer a complete line of products designed to clean, protect and enhance the... [See More]
- Form: Aerosol; Liquid
- Substrate: Wood; Other; Fabric
- Type: Coating; Sealer
- Cure / Setting Technology: Film Drying
from JARO Corp.
At Jaro Corp, we manufacture and apply our own dielectric coating: JARO 650 Series Polyimide. This coating is a proprietary polyimide thermo set material, offering outstanding characteristics which include: Remarkable resistance to high temperatures. It also performs well at cryogenic levels. High... [See More]
- Form: Aerosol
- Chemistry: Polyimide
- Type: Coating; Nonconductive, Insulating Coating
- Substrate: Other; Electronic Component Substrates
from Rust-Oleum Corporation
15 oz Aerosol; Safety Blue; 30 min Fast Dry; 200 °F Dry Heat Resistance; for Indoor/Outdoor Use; for General Industrial Applications; Premium brand enamel aerosol from Rustoleum [See More]
- Form: Aerosol
- Substrate: Aluminum; Metallic; Steel
- Type: Coating; Enamel; Paint
- Cure / Setting Technology: Film Drying
from Henkel Corporation - Industrial
Latex coating for rusted metal to stop rust, protect and act as a primer for a finish coat. It is suitable for exterior use in mild environments. LOCTITE ® 754 Extend ® Rust Treatment is a fast drying, milky white liquid latex coating applied to rusted metal to stop rust, protect and act as... [See More]
- Form: Aerosol; Liquid; Transfer Tape
- Substrate: Metallic
- Type: Coating
- Industry: OEM / Industrial
from LexJet Corporation
Clear Jet Original Type A2000. For applications requiring aerosol finishing for use with water sensitive or non-water sensitive inkjet products. When ink is not absorbed by the media strong enough both water based and solvent based sprays will deteriorate the ink. [See More]
- Form: Aerosol; Solvent; Water
- Coverage: 370
- Type: Coating
from U.S. Plastic Corporation
Dip-It-Yourself compound-make your own plastic grips for your tools. This coats metal, wood, glass, rubber, foam, and plastics. It does not chip or peel. It is an excellent application for tools because it gives more gripping power, insulates and serves to identify ownership. It can be used to coat... [See More]
- Form: Aerosol
- Chemistry: Rubber
- Type: Coating
from 3M Advanced Materials Division
Elastomer-based formula creates a tough, flexible, abrasion resistant coating. Resists heat, flame, and weathering for lasting, reliable performance. Resists gasoline, aircraft fuel, hydraulic oil and water. Can be applied by spraying, brushing or flow coating. 3M ™ Scotch-Weld ™... [See More]
- Form: Aerosol; Liquid
- Substrate: Glass; Wood
- Type: Coating
- Features: Abrasion, Erosion or Wear Resistant
from Aervoe Industries Incorporated
Quick-drying, asphalt-based material, forms a smooth, even, protective film [See More]
- Form: Aerosol
- Chemistry: Resin
- Type: Coating; Primer
- Substrate: Concrete; Metallic; Plastic; Wood; Other; Vinyl
from Dampney Company, Inc.
Selective Black, silicone-based paint which collects heat more efficiently than ordinary black paint and resists out gassing to 400F. It is designed to selectively absorb wavelengths with the greatest heat content when used on the metal surfaces of collector panels having glazed covers. It collects... [See More]
- Form: Aerosol; Liquid
- Chemistry: Resin; Silicone
- Type: Coating; Paint
- Substrate: Aluminum; Metallic; Steel; Other; Stainless Steel
from Chemical Strategies, Inc.
Chemical Strategies offers all Krylon products. If you are unable to locate a paint or coating you need, our sales department can custom source any needed materials for you directly. [See More]
- Form: Aerosol
- Chemistry: Acrylic; Resin
- Type: Enamel; Paint
from R. S. Hughes Company, Inc.
3M 06839 overspray protective coatings comes in clear and is packaged 1 gal per inner, 4 per case. [See More]
- Form: Aerosol
- Dispensing Method: Sprayable
- Type: Coating
from Chase Products Co.
Champion Sprayon ® Stainless Steel Cleaner, Polish and Protectant is a unique oil-in-water emulsion that quickly cleans, shines and protects without scratching. Heavy-duty cleaning agents and surfactants deep-clean, and remove smudges, soil, oil and grease stains, water marks and rust without... [See More]
- Form: Aerosol
- Substrate: Metallic; Steel
- Type: Coating
- Dispensing Method: Sprayable
from Sherwin-Williams
Paint & Coatings. A wide variety of coatings for residential or commercial use offer top quality performance. Primers. Exterior primers assure superior hiding, topcoat appearance and long-lasting results. Commercial High-Performance Coatings. A comprehensive line-up of high-performance coatings... [See More]
- Form: Aerosol; Liquid
- Chemistry: Acrylic; Alkyd; Resin
- Type: Coating; Enamel; Primer; Base Coat; Clear Coat; Paint; Sealer; Stain
- Substrate: Concrete; Metallic; Plastic; Wood
from Valspar Corporation (The)
GENERAL PURPOSE. Indoors or out, whatever the surface, choose the finest multi-purpose enamel paint available for a durable, flawless finish that is scratch- and water-resistant. PRIMER. Get your project off to the best start possible with job-specific formulations that cover a wide range of... [See More]
- Form: Aerosol
- Chemistry: Resin; Vinyl
- Type: Coating; Enamel; Lacquer Paint; Primer; Base Coat; Clear Coat; Paint
- Substrate: Metallic
from Rust-Oleum Corporation
15 oz Aerosol; Safety Yellow; 30 min Fast Dry; 200 °F Dry Heat Resistance; for Indoor/Outdoor Use; for General Industrial Applications; Premium brand enamel aerosol from Rustoleum [See More]
- Form: Aerosol
- Substrate: Aluminum; Metallic; Steel
- Type: Coating; Enamel; Paint
- Cure / Setting Technology: Film Drying
from Henkel Corporation - Industrial
Synthetic rubber coating specially formulated to protect underbodies from corrosion. It dries to a firm, flexible, tack-free, rubberized film. LOCTITE ® SF 7607 is a dark brown to black, synthetic rubber coating specially formulated to protect underbodies from corrosion. It dries to a firm,... [See More]
- Form: Aerosol; Liquid; Transfer Tape
- Substrate: Metallic
- Type: Coating
- Industry: OEM / Industrial
from U.S. Plastic Corporation
Dip-It-Yourself compound-make your own plastic grips for your tools. This coats metal, wood, glass, rubber, foam, and plastics. It does not chip or peel. It is an excellent application for tools because it gives more gripping power, insulates and serves to identify ownership. It can be used to coat... [See More]
- Form: Aerosol
- Chemistry: Rubber
- Type: Coating
from Chemical Strategies, Inc.
Chemical Strategies offers all Krylon products. If you are unable to locate a paint or coating you need, our sales department can custom source any needed materials for you directly. [See More]
- Form: Aerosol
- Chemistry: Acrylic; Resin
- Type: Enamel; Paint
from R. S. Hughes Company, Inc.
3M 06840 overspray protective coatings comes in clear and is packaged 5 gal per inner, 1 per case. [See More]
- Form: Aerosol
- Dispensing Method: Sprayable
- Type: Coating
from Chase Products Co.
Cold Galvanizing 95 is a complete zinc metal spray which rustproofs any metal surface with thorough protection that lasts for years. It is equivalent to a hot galvanizing treatment as it fuses and adheres to all metal surfaces, stopping corrosion immediately. Zinc used in this product is 95% pure. [See More]
- Form: Aerosol
- Chemistry: Zinc; Metal Filled
- Type: Coating
- Substrate: Aluminum; Metallic; Steel
from Sherwin-Williams
Paint & Coatings. A wide variety of coatings for residential or commercial use offer top quality performance. Primers. Interior primers assure superior hiding, topcoat appearance and long-lasting results. Wood Stains, Sealers & Clear Topcoats. A wide variety of stains and sealers for... [See More]
- Form: Aerosol; Liquid
- Chemistry: Acrylic; Alkyd; Resin
- Type: Coating; Enamel; Primer; Base Coat; Clear Coat; Paint; Sealer; Stain
- Substrate: Concrete; Metallic; Plastic; Wood
from Valspar Corporation (The)
Protect and beautify toys, swing sets, railings, mailboxes, patio furniture and much more! Use Anti-Rust Armor Primer to seal surface before painting with Anti-Rust Armor Enamel for best results. Maximum Anti-Rust Protection. Heavy Duty. Superior durability. Moisture & Chemical Resistant. For... [See More]
- Form: Aerosol
- Cure / Setting Technology: Film Drying
- Type: Coating; Clear Coat; Paint
- Dispensing Method: Sprayable
from Rust-Oleum Corporation
15 oz, Aerosol Can; Red; Used with V2100 System Enamel Aerosol; for Corrosion Protection; Used on rusted, bare, or previously painted metal; Fast Dry; Temperatures up to 200°F; Enamel Primer [See More]
- Form: Aerosol
- Substrate: Aluminum; Metallic; Steel
- Type: Coating; Enamel; Paint
- Cure / Setting Technology: Film Drying
from Henkel Corporation - Industrial
known as BONDERITE 1070) is formulated for spray and immersion application to steel, aluminum and zinc surfaces to clean and develop a conversion coating. BONDERITE ® M-FE 1070 IRON PHOSPHATE (Known as BONDERITE 1070) is formulated for spray and immersion application to steel, aluminum and... [See More]
- Form: Aerosol; Liquid; Transfer Tape
- Chemistry: Conversion
- Type: Coating
- Substrate: Metallic
from U.S. Plastic Corporation
Dip-It-Yourself compound-make your own plastic grips for your tools. This coats metal, wood, glass, rubber, foam, and plastics. It does not chip or peel. It is an excellent application for tools because it gives more gripping power, insulates and serves to identify ownership. It can be used to coat... [See More]
- Form: Aerosol
- Chemistry: Rubber
- Type: Coating
from Chemical Strategies, Inc.
Chemical Strategies offers all Krylon products. If you are unable to locate a paint or coating you need, our sales department can custom source any needed materials for you directly. [See More]
- Form: Aerosol
- Chemistry: Acrylic; Resin
- Type: Enamel; Paint
from R. S. Hughes Company, Inc.
3M 08881 undercoating comes in black and is packaged 16 oz per inner, 6 per case. Can be used with metal. Cure time should always be considered on any application or project. Once applied, this product requires a 30 min cure time before it is fully set and provides maximum strength. [See More]
- Form: Aerosol
- Dispensing Method: Sprayable
- Type: Coating
from Chase Products Co.
CS+ Lubricant is a 4-way lube that stops annoying squeaks, guards against rust and corrosion, releases rusted or frozen metal parts with instant penetration, and removes moisture. It will displace water and moisture-proof all types of electrical equipment, relay switches, wet engines, distributors,... [See More]
- Form: Aerosol
- Substrate: Aluminum; Metallic; Steel
- Type: Coating
- Cure / Setting Technology: Multicomponent
from Sherwin-Williams
Paint & Coatings. A wide variety of coatings for residential or commercial use offer top quality performance. Primers. Interior primers assure superior hiding, topcoat appearance and long-lasting results. Wood Stains, Sealers & Clear Topcoats. A wide variety of stains and sealers for... [See More]
- Form: Aerosol; Liquid
- Chemistry: Acrylic; Alkyd; Resin
- Type: Coating; Enamel; Primer; Base Coat; Clear Coat; Paint; Sealer; Stain
- Substrate: Concrete; Metallic; Plastic; Wood
from Valspar Corporation (The)
Valspar Premium Spray Paint is simply the finest multi-purpose spray paint available. Sold through Lowe's Home Improvement, and independent hardware and paint stores, Valspar Premium is available in a range of finishes to suit your chosen application. Multi-purpose spray paint for use on virtually... [See More]
- Form: Aerosol
- Cure / Setting Technology: Film Drying
- Type: Coating; Clear Coat; Paint
- Dispensing Method: Sprayable
from Rust-Oleum Corporation
15 oz Aerosol; Flat Black; 30 min Fast Dry; 200 °F Dry Heat Resistance; for Indoor/Outdoor Use; for General Industrial Applications; Premium brand enamel aerosol from Rustoleum [See More]
- Form: Aerosol
- Substrate: Aluminum; Metallic; Steel
- Type: Coating; Enamel; Paint
- Cure / Setting Technology: Film Drying
from Henkel Corporation - Industrial
LOCTITE STYCAST PC 40-UMF, Urethane Acrylate, Conformal coating LOCTITE ® STYCAST PC 40-UMF conformal coating is specifically formulated to rapidly gel and immobilize when exposed to UV light and then fully cure when exposed to atmospheric moisture, ensuring optimum performance even in shadowed... [See More]
- Form: Aerosol; Transfer Tape
- Substrate: Metallic
- Type: Coating
- Industry: OEM / Industrial
from U.S. Plastic Corporation
Dip-It-Yourself compound-make your own plastic grips for your tools. This coats metal, wood, glass, rubber, foam, and plastics. It does not chip or peel. It is an excellent application for tools because it gives more gripping power, insulates and serves to identify ownership. It can be used to coat... [See More]
- Form: Aerosol
- Chemistry: Rubber
- Type: Coating
from Chemical Strategies, Inc.
Chemical Strategies offers all Krylon products. If you are unable to locate a paint or coating you need, our sales department can custom source any needed materials for you directly. [See More]
- Form: Aerosol
- Chemistry: Acrylic; Resin
- Type: Enamel; Paint
from R. S. Hughes Company, Inc.
3M 08882 undercoating comes in black and is packaged 12.75 oz per inner, 6 per case. Can be used with metal. Cure time should always be considered on any application or project. Once applied, this product requires a 30 min cure time before it is fully set and provides maximum strength. [See More]
- Form: Aerosol
- Dispensing Method: Sprayable
- Type: Coating
from Chase Products Co.
Galv-Off ® removes the buildup of galvanization, softening it so that it flakes off by itself. Even stubborn deposits can be removed with frequent application. When used daily, it not only prevents harmful deposits from accumulating, but it also lubricates and protects rollers and dies. The... [See More]
- Form: Aerosol
- Dispensing Method: Sprayable
- Type: Coating
- Features: Corrosion Resistant; Protective
from Sherwin-Williams
Paint. Highly durable, high quality coatings designed for superior performance on all exterior substrates. Our low-temp formulas let you expand your season. Primers. Get beautiful, long-lasting results for your exterior surfaces. Primers "anchor" finish coats, level uneven areas, seal porous... [See More]
- Form: Aerosol; Liquid
- Chemistry: Acrylic; Alkyd; Resin
- Type: Coating; Enamel; Primer; Base Coat; Clear Coat; Paint; Sealer; Stain
- Substrate: Concrete; Metallic; Plastic; Wood
from Rust-Oleum Corporation
15 oz Aerosol; Gloss Black; 30 min Fast Dry; 200 °F Dry Heat Resistance; for Indoor/Outdoor Use; for General Industrial Applications; Premium brand enamel aerosol from Rustoleum [See More]
- Form: Aerosol
- Substrate: Aluminum; Metallic; Steel
- Type: Coating; Enamel; Paint
- Cure / Setting Technology: Film Drying
from Henkel Corporation - Industrial
2-part, non-slip epoxy coating designed to withstand heavy vehicular traffic under dry service temperatures of -20 °F to +140 °F (-30 °C to +60 °C). LOCTITE ® PC 6311 is a 2-part, non-slip epoxy coating designed to withstand heavy vehicular traffic under dry service... [See More]
- Form: Aerosol; Transfer Tape
- Substrate: Metallic
- Type: Coating
- Industry: OEM / Industrial
from U.S. Plastic Corporation
Dip-It-Yourself compound-make your own plastic grips for your tools. This coats metal, wood, glass, rubber, foam, and plastics. It does not chip or peel. It is an excellent application for tools because it gives more gripping power, insulates and serves to identify ownership. It can be used to coat... [See More]
- Form: Aerosol
- Chemistry: Rubber
- Type: Coating
from Chemical Strategies, Inc.
Chemical Strategies offers all Krylon products. If you are unable to locate a paint or coating you need, our sales department can custom source any needed materials for you directly. [See More]
- Form: Aerosol
- Chemistry: Acrylic; Resin
- Type: Enamel; Paint
from R. S. Hughes Company, Inc.
3M 08883 undercoating comes in black and is packaged 19.7 oz per inner, 6 per case. Can be used with metal. Cure time should always be considered on any application or project. Once applied, this product requires a 24 hr cure time before it is fully set and provides maximum strength. [See More]
- Form: Aerosol
- Dispensing Method: Sprayable
- Type: Coating
from Chase Products Co.
Penetrating Oil and Demoisturant will displace water and moisture-proof all types of electrical equipment, even if the equipment is completely submerged. It saves production, maintenance and repair time, protects and preserves valuable equipment, waterproofs ignition systems, and protects metal... [See More]
- Form: Aerosol
- Substrate: Metallic
- Type: Coating
- Cure / Setting Technology: Multicomponent
from Sherwin-Williams
Paint. A critical step for any painting project is choosing the right paint. Thanks to today's improved coatings and applicators, even first-time painters can achieve professional-quality results. Primers. Get the beautiful, long-lasting results you expect. Primers "anchor" finish coats, level... [See More]
- Form: Aerosol; Liquid
- Chemistry: Acrylic; Alkyd; Resin
- Type: Coating; Enamel; Primer; Base Coat; Clear Coat; Paint; Sealer; Stain
- Substrate: Concrete; Metallic; Plastic; Wood
from Rust-Oleum Corporation
15 oz Aerosol Can; Gray; Used with V2100 System Enamel Aerosol; for Corrosion Protection; Used on rusted, bare, or previously painted metal; Fast Dry; Temperatures up to 200°F; Enamel Primer [See More]
- Form: Aerosol
- Substrate: Aluminum; Metallic; Steel
- Type: Coating; Enamel; Paint
- Cure / Setting Technology: Film Drying
from Henkel Corporation - Industrial
Solvent-based belt dressing emulsion specifically designed to eliminate squeaks, aid in power transfer and increase belt life. LOCTITE ® SF 5408 (known as LOCTITE BELT DRESSING) is a creamy white, high quality, solvent-based belt dressing emulsion specifically designed to eliminate squeaks, aid... [See More]
- Form: Aerosol; Transfer Tape
- Substrate: Metallic
- Type: Coating
- Industry: OEM / Industrial
from U.S. Plastic Corporation
Dip-It-Yourself compound-make your own plastic grips for your tools. This coats metal, wood, glass, rubber, foam, and plastics. It does not chip or peel. It is an excellent application for tools because it gives more gripping power, insulates and serves to identify ownership. It can be used to coat... [See More]
- Form: Aerosol
- Chemistry: Rubber
- Type: Coating
from Chemical Strategies, Inc.
Chemical Strategies offers all Krylon products. If you are unable to locate a paint or coating you need, our sales department can custom source any needed materials for you directly. [See More]
- Form: Aerosol
- Chemistry: Acrylic; Resin
- Type: Enamel; Paint
from R. S. Hughes Company, Inc.
3M 08889 rocker panel coating comes in clear and is packaged 23 oz per inner, 6 per case. [See More]
- Form: Aerosol
- Dispensing Method: Sprayable
- Type: Coating
from Chase Products Co.
Silicone Lubricant frees sticking mechanisms, eliminates fan belt squeaks, metal-to-metal noises and rubber-to-metal squeaks. It repels water and ice and retards rust and corrosion, lubricates hinges and prevents freezing of exposed locks. Excellent for waterproofing ignition systems and other... [See More]
- Form: Aerosol
- Substrate: Metallic
- Type: Coating; Primer
- Cure / Setting Technology: Multicomponent
from Sherwin-Williams
Paint & Coatings. A wide variety of coatings for residential or commercial use offer top quality performance. Primers. Exterior primers assure superior hiding, topcoat appearance and long-lasting results. Commercial High-Performance Coatings. A comprehensive line-up of high-performance coatings... [See More]
- Form: Aerosol; Liquid
- Chemistry: Acrylic; Alkyd; Resin
- Type: Coating; Enamel; Primer; Base Coat; Clear Coat; Paint; Sealer; Stain
- Substrate: Concrete; Metallic; Plastic; Wood
from Rust-Oleum Corporation
15 oz Aerosol; Dark Machine Gray; 30 min Fast Dry; 200 °F Dry Heat Resistance; for Indoor/Outdoor Use; for General Industrial Applications; Premium brand enamel aerosol from Rustoleum [See More]
- Form: Aerosol
- Substrate: Aluminum; Metallic; Steel
- Type: Coating; Enamel; Paint
- Cure / Setting Technology: Film Drying
from Henkel Corporation - Industrial
2-part, solvent-free epoxy which creates an extremely durable anti-slip coating that withstands heavy vehicular traffic on various types of surfaces. LOCTITE ® PC 6315 is a 2-part, solvent-free epoxy which creates an extremely durable anti-slip coating that withstands heavy vehicular traffic on... [See More]
- Form: Aerosol; Transfer Tape
- Substrate: Metallic
- Type: Coating
- Industry: OEM / Industrial
from U.S. Plastic Corporation
Dip-It-Yourself compound-make your own plastic grips for your tools. This coats metal, wood, glass, rubber, foam, and plastics. It does not chip or peel. It is an excellent application for tools because it gives more gripping power, insulates and serves to identify ownership. It can be used to coat... [See More]
- Form: Aerosol
- Chemistry: Rubber
- Type: Coating
from Chemical Strategies, Inc.
Chemical Strategies offers all Krylon products. If you are unable to locate a paint or coating you need, our sales department can custom source any needed materials for you directly. [See More]
- Form: Aerosol
- Chemistry: Acrylic; Resin
- Type: Enamel; Paint
from R. S. Hughes Company, Inc.
3M 08892 wax comes in tan and is packaged 18.75 oz per inner, 6 per case. Can be used with metal. [See More]
- Form: Aerosol
- Dispensing Method: Sprayable
- Type: Coating
from Chase Products Co.
Silicone Mold Release Spray is a colorless, dry spray that reduces friction and buildup on molds without leaving an oily or greasy surface. Dries fast. Extends the life of equipment. Cuts cleanup time. This non-staining formula has a low surface tension and performs in temperatures from -47 °F... [See More]
- Form: Aerosol
- Substrate: Glass; Metallic; Wood; Other; Rubber
- Type: Coating
- Cure / Setting Technology: Multicomponent
from Sherwin-Williams
Paint & Coatings. A wide variety of coatings for residential or commercial use offer top quality performance. Primers. Interior primers assure superior hiding, topcoat appearance and long-lasting results. Wood Stains, Sealers & Clear Topcoats. A wide variety of stains and sealers for... [See More]
- Form: Aerosol; Liquid
- Chemistry: Acrylic; Alkyd; Resin
- Type: Coating; Enamel; Primer; Base Coat; Clear Coat; Paint; Sealer; Stain
- Substrate: Concrete; Metallic; Plastic; Wood
from Rust-Oleum Corporation
15 oz Aerosol; Gloss White; 30 min Fast Dry; 200 °F Dry Heat Resistance; for Indoor/Outdoor Use; for General Industrial Applications; Premium brand enamel aerosol from Rustoleum [See More]
- Form: Aerosol
- Substrate: Aluminum; Metallic; Steel
- Type: Coating; Enamel; Paint
- Cure / Setting Technology: Film Drying
from U.S. Plastic Corporation
Dip-It-Yourself compound-make your own plastic grips for your tools. This coats metal, wood, glass, rubber, foam, and plastics. It does not chip or peel. It is an excellent application for tools because it gives more gripping power, insulates and serves to identify ownership. It can be used to coat... [See More]
- Form: Aerosol
- Chemistry: Rubber
- Type: Coating
from Chemical Strategies, Inc.
Chemical Strategies offers all Krylon products. If you are unable to locate a paint or coating you need, our sales department can custom source any needed materials for you directly. [See More]
- Form: Aerosol
- Chemistry: Acrylic; Resin
- Type: Enamel; Paint
from R. S. Hughes Company, Inc.
3M 16-501 zinc spray comes in gray and is packaged 12 per case. Designed to have rust-preventative properties based on the zinc formulation. [See More]
- Form: Aerosol
- Dispensing Method: Sprayable
- Type: Coating
- Features: Corrosion Resistant
from Rust-Oleum Corporation
Fast drying, multi-purpose, modified-alkyd enamel aerosol, indoor/outdoor [See More]
- Form: Aerosol
- Chemistry: Alkyd; Resin
- Type: Coating; Enamel; Base Coat; Paint
- Substrate: Metallic; Steel
from U.S. Plastic Corporation
Plasti Dip Acrylic Primer specifically developed to increase adhesion of Plasti Dip to metals and/or shiny surfaces up to 400%. Can be easily applied by spraying, dipping or brushing and offers fast set up time with a high coverage rate. Typically applied in one application, only extreme corrosion... [See More]
- Form: Aerosol
- Type: Coating; Primer
from Chemical Strategies, Inc.
Chemical Strategies offers all Krylon products. If you are unable to locate a paint or coating you need, our sales department can custom source any needed materials for you directly. [See More]
- Form: Aerosol
- Chemistry: Acrylic; Resin
- Type: Enamel; Paint
from R. S. Hughes Company, Inc.
3M 39034 wax comes in brown and is packaged 16 oz per inner, 4 per case. Can be used with metal. [See More]
- Form: Aerosol
- Dispensing Method: Sprayable
- Type: Coating
from Rust-Oleum Corporation
12 oz Aerosol Can; Safety Blue; 12 min to Tack-free Dry; 200 °F Dry Heat Resistance; for Indoor/Outdoor Use; Premium brand from Rustoleum; Multipurpose Paint [See More]
- Form: Aerosol
- Substrate: Aluminum; Metallic; Steel
- Type: Coating; Enamel; Paint
- Cure / Setting Technology: Film Drying
from Chemical Strategies, Inc.
Chemical Strategies offers all Krylon products. If you are unable to locate a paint or coating you need, our sales department can custom source any needed materials for you directly. [See More]
- Form: Aerosol
- Chemistry: Acrylic; Resin
- Type: Enamel; Paint
from R. S. Hughes Company, Inc.
3M 03584 rubberized undercoating comes in black and is packaged 1 each. [See More]
- Form: Aerosol
- Dispensing Method: Sprayable
- Type: Coating
- Features: Corrosion Resistant
from Rust-Oleum Corporation
12 oz, Aerosol Can; Gray Primer; Used with 1600 System Enamel Aerosol; Provides a solid base for adhesion of topcoat; Wet or dry Sandable; Use on wood, metal, masonry, etc.; Fast Dry; Temperatures up to 200°F; Enamel Primer [See More]
- Form: Aerosol
- Substrate: Aluminum; Concrete; Metallic; Steel; Wood
- Type: Coating; Enamel; Paint
- Cure / Setting Technology: Film Drying
from Chemical Strategies, Inc.
Chemical Strategies offers all Krylon products. If you are unable to locate a paint or coating you need, our sales department can custom source any needed materials for you directly. [See More]
- Form: Aerosol
- Chemistry: Acrylic; Resin
- Type: Enamel; Paint
from R. S. Hughes Company, Inc.
3M Bondo 737 undercoating comes in black and is packaged 18 oz per inner, 6 per case. Cure time should always be considered on any application or project. Once applied, this product requires a 24 hr cure time before it is fully set and provides maximum strength. [See More]
- Form: Aerosol
- Dispensing Method: Sprayable
- Type: Coating
from Chemical Strategies, Inc.
Chemical Strategies offers all Krylon products. If you are unable to locate a paint or coating you need, our sales department can custom source any needed materials for you directly. [See More]
- Form: Aerosol
- Chemistry: Acrylic; Resin
- Type: Enamel; Paint
from R. S. Hughes Company, Inc.
3M Mar-Hyde 3509 rust converter comes in clear and is packaged 10 oz per inner, 12 per case. Can be used with steel. Cure time should always be considered on any application or project. Once applied, this product requires a 12 hr cure time before it is fully set and provides maximum strength. [See More]
- Form: Aerosol
- Dispensing Method: Sprayable
- Type: Coating
from Chemical Strategies, Inc.
Chemical Strategies offers all Krylon products. If you are unable to locate a paint or coating you need, our sales department can custom source any needed materials for you directly. [See More]
- Form: Aerosol
- Chemistry: Acrylic; Resin
- Type: Enamel; Paint
from R. S. Hughes Company, Inc.
3M Mar-Hyde 3811 trim coating comes in black and is packaged 12 oz per inner, 12 per case. Can be used with brass, plastic, steel. [See More]
- Form: Aerosol
- Dispensing Method: Sprayable
- Type: Coating
from Chemical Strategies, Inc.
Chemical Strategies offers all Krylon products. If you are unable to locate a paint or coating you need, our sales department can custom source any needed materials for you directly. [See More]
- Form: Aerosol
- Chemistry: Acrylic; Resin
- Type: Enamel; Paint
from R. S. Hughes Company, Inc.
3M Mar-Hyde 3821 trim coating comes in gray and is packaged 1 can per pack, 12 per case. Can be used with aluminum, plastic, steel. Cure time should always be considered on any application or project. Once applied, this product requires a 2 hr cure time before it is fully set and provides maximum... [See More]
- Form: Aerosol
- Dispensing Method: Sprayable
- Type: Coating
from Chemical Strategies, Inc.
Chemical Strategies offers all Krylon products. If you are unable to locate a paint or coating you need, our sales department can custom source any needed materials for you directly. [See More]
- Form: Aerosol
- Chemistry: Acrylic; Resin
- Type: Enamel; Paint
from R. S. Hughes Company, Inc.
3M Mar-Hyde 4911 bumper coating comes in black and is packaged 12 oz per inner, 12 per case. Can be used with plastic. Cure time should always be considered on any application or project. Once applied, this product requires a 2 hr cure time before it is fully set and provides maximum strength. [See More]
- Form: Aerosol
- Dispensing Method: Sprayable
- Type: Coating
from Chemical Strategies, Inc.
Chemical Strategies offers all Krylon products. If you are unable to locate a paint or coating you need, our sales department can custom source any needed materials for you directly. [See More]
- Form: Aerosol
- Chemistry: Acrylic; Resin
- Type: Enamel; Paint
from R. S. Hughes Company, Inc.
The 3M Novec ready-to-use flux remover is sold 6 cans per case and is another quality product from 3M. Use caution when purchasing products in this category as some may be flammable. This particular flux remover is not flammable. [See More]
- Form: Aerosol
- Type: Coating
from Chemical Strategies, Inc.
Chemical Strategies offers all Krylon products. If you are unable to locate a paint or coating you need, our sales department can custom source any needed materials for you directly. [See More]
- Form: Aerosol
- Chemistry: Acrylic; Resin
- Type: Enamel; Paint
from R. S. Hughes Company, Inc.
The ACL ready-to-use ESD / anti-static cleaning chemical is sold 12 per case and is another quality product from ACL. [See More]
- Form: Aerosol
- Type: Coating
from Chemical Strategies, Inc.
Chemical Strategies offers all Krylon products. If you are unable to locate a paint or coating you need, our sales department can custom source any needed materials for you directly. [See More]
- Form: Aerosol
- Chemistry: Acrylic; Resin
- Type: Enamel; Paint
from R. S. Hughes Company, Inc.
The ACL Staticide 8607 ready-to-use flux remover is sold 12 per case and is another quality product from ACL. Use caution when purchasing products in this category as some may be flammable. This particular flux remover is flammable. [See More]
- Form: Aerosol
- Type: Coating
from Chemical Strategies, Inc.
Chemical Strategies offers all Krylon products. If you are unable to locate a paint or coating you need, our sales department can custom source any needed materials for you directly. [See More]
- Form: Aerosol
- Chemistry: Acrylic; Resin
- Type: Enamel; Paint
from R. S. Hughes Company, Inc.
The ACL Staticide 8623 ready-to-use flux remover is sold 12 per case and is another quality product from ACL. Use caution when purchasing products in this category as some may be flammable. This particular flux remover is flammable. [See More]
- Form: Aerosol
- Type: Coating
from Chemical Strategies, Inc.
Chemical Strategies offers all Krylon products. If you are unable to locate a paint or coating you need, our sales department can custom source any needed materials for you directly. [See More]
- Form: Aerosol
- Chemistry: Acrylic; Resin
- Type: Enamel; Paint
from R. S. Hughes Company, Inc.
The ACL Staticide A4 ready-to-use flux remover is sold 12 per case and is another quality product from ACL. Use caution when purchasing products in this category as some may be flammable. This particular flux remover is not flammable. Additional, and potentially important, information was collected... [See More]
- Form: Aerosol
- Type: Coating
from Chemical Strategies, Inc.
Chemical Strategies offers all Krylon products. If you are unable to locate a paint or coating you need, our sales department can custom source any needed materials for you directly. [See More]
- Form: Aerosol
- Chemistry: Acrylic; Resin
- Type: Enamel; Paint
from R. S. Hughes Company, Inc.
The ACL Staticide acrylic ESD / anti-static coating is sold 12 Per Case and is another quality product from ACL. Use caution when purchasing products in this category as some may be flammable. This particular ESD / anti-static coating is flammable. [See More]
- Form: Aerosol
- Chemistry: Acrylic; Resin
- Type: Coating
from Chemical Strategies, Inc.
Chemical Strategies offers all Krylon products. If you are unable to locate a paint or coating you need, our sales department can custom source any needed materials for you directly. [See More]
- Form: Aerosol
- Chemistry: Acrylic; Resin
- Type: Enamel; Paint
from R. S. Hughes Company, Inc.
The ACL Staticide ESD / anti-static cleaner is sold 12 Per Case and is another quality product from ACL. Use caution when purchasing products in this category as some may be flammable. This particular ESD / anti-static cleaner is not flammable. [See More]
- Form: Aerosol
- Type: Coating
from Chemical Strategies, Inc.
Chemical Strategies offers all Krylon products. If you are unable to locate a paint or coating you need, our sales department can custom source any needed materials for you directly. [See More]
- Form: Aerosol
- Chemistry: Acrylic; Resin
- Type: Enamel; Paint
from R. S. Hughes Company, Inc.
The ACL Staticide ESD / anti-static coating is sold 12 Per Case and is another quality product from ACL. Use caution when purchasing products in this category as some may be flammable. This particular ESD / anti-static coating is flammable. [See More]
- Form: Aerosol
- Type: Coating
from Chemical Strategies, Inc.
Chemical Strategies offers all Krylon products. If you are unable to locate a paint or coating you need, our sales department can custom source any needed materials for you directly. [See More]
- Form: Aerosol
- Chemistry: Acrylic; Resin
- Type: Enamel; Paint
from R. S. Hughes Company, Inc.
The ACL Staticide flux remover lead-free is sold 12 per case and is another quality product from ACL. Use caution when purchasing products in this category as some may be flammable. This particular flux remover lead-free is flammable. [See More]
- Form: Aerosol
- Type: Coating